Datalogic ADC FALCON4220 PDA Scanner With WLAN User Manual PC021 Ver0
Datalogic ADC, Inc. PDA Scanner With WLAN PC021 Ver0
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 424839 |
| Application ID | zKsCD2ua7CM0O1C9DbyzTA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 148.57kB (1857114 bits) |
| Date Submitted | 2004-05-24 00:00:00 |
| Date Available | 2004-05-21 00:00:00 |
| Creation Date | 2003-10-20 21:45:35 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2004-04-29 12:00:57 |
| Document Title | PC021 Ver0 |
| Document Creator | Acrobat PDFMaker 5.0 for Word |
| Document Author: | JasonYeh |
FALCON4220
Ver 1.0 10/20/2003
Key Features
Intel Cotulla 400Mhz 32 bits RISC Processor
64/128 MB SDRAM and 64MB Flash ROM
One CF-II and SD expansion slot
Support USB1.1 Client and Host
Bar-Code Engine Build in (Laser/CCD Scanner)
Wireless Communication Ready (802.11b)
Alphanumeric Keyboard Build-in
Specifications
Processor
Cotulla 400Mhz 32 bits RISC CPU
Chipset
Intel Cotulla embedded chipset
Media-Q MQ1188 Graphic, SD and USB host
Controller
Wolfson WM9705 AC’97 codec with Touch
screen controller
Memory
64MB (M-System) Flash ROM
64/128MB SDRAM
Display
Support 240 X 320 TFT 256K Color LCD
0.0745mmX3 (H) X0.2235mm (V) dot pitch
Transflective type TFT LCD with back light
Support 4-wire resistance type touch panel
Audio
One mono speaker
2.5mm DIA stereo earphone jack with
Microphone input.
USB Function
Support USB 1.1 Compliant Function
Support USB 1.1 Compliant Host in 100mA
USB interface will support from cradle USB
connector or external USB cable
Expansion Module
Laser Engine / Long Range CCD / 2D Scanner
(Opticon VLM4000/4100, Bitatek CCD,
Symbol SE900A/SE800)
Infrared Port
One IrDA 1.2 compliant SIR port support
20cm ~ 30cm distance
Expansion Slot
One Compact Flash Type-II slot (support 3.3V)
One SD Card slot (support SDIO)
Power System
Build in 1800mAh Li-Polymer removable
battery (10 operation & 100 standby hours in
64MB DRAM and 64 ROM module)
25 mAh rechargeable backup battery (It will
hold the system data at least 2 hours without
main battery)
One adapter with 100~240Vac, 50/60Hz
AC input and 5V/2A DC output
One DC-IN jack
Button/Key
Power/Front light on/off button
4-way navigation button
2 Scanner Enable Keys
SW Reset input button
System battery (power) switch
16 + 1 alphanumeric keyboard
LED
One three-color LED for Alarm
notification(R) and charger indicator(G/B)
One two-color LED for scanner indicator
Power Management
Support for Xscale application modes
including: Turbo Mode, Normal Mode,
Idle Mode and Sleep Mode
Peripheral power – On/Off controllable via
software
RADIO Module
802.11b
Dimensions and Weight
78 mm (W) x 168mm(L) x 33mm(H)
Weight: 350g
Software
Microsoft WinCE .NET 4.2 (Professional
Version)
IE, Inbox, Async..etc.
SW update from CF
Environmental Test
Operating Temperature: -10℃~50℃
Storage Temperature: -20℃~60℃
IP54 Standard (Cradle is not be included)
4 ft (1.2m) drop to concrete
Peripherals and Accessories
Hand-Strap
WAN Module
Docking Station
Color
Dark-Blue
FALCON4220 Keypad Layout
10/20/2003
Docking Station
10/20/2003
Key Features
PC Communication
Battery Management
USB Host and Client
RS-232
Ethernet Module Ready (optional)
Specifications
DC Power Jack Input
DC 5V/2A
2nd Battery Status LED
No LED: Fully charged
Amber: Charging
Flashing: Problem
USB Client Connector
Connect to PC
Support USB Client only
USB Host Connector
Support USB Host
Support USB device (100mA)
RS232 D-Sub Connector
Connect to PC
Support RS232 full function
Ethernet Module (optional)
Support 10/100 Mb Ethernet
communication
Connect through USB host connector
2nd Battery Charge Slot
Support 2nd Battery Charge
Size and Weight
130mm(L) x 120mm(W) x 20mm(H)
Weight: TDB
Environmental
Operating Temperature: 0℃~50℃
Storage Temperature: -20℃~60℃
75cm drop to concrete
Peripherals and Accessories
USB Cable (connect to PC)
RS-232 Cable
Ethernet Module
Standard Packing List
N.O.
Item
10/20/2003
Notes
1.
PC320 Terminal
2.
User’s Manual
Intercom provide
3.
Quick Guide
Intercom provide
4.
Warranty Card
Intercom provide
5.
Supplement CD
Intercom provide content
and art work
6.
Standard AC Adaptor
7.
Standard Battery Pack
8.
AC Power Core
9.
Opened CF Cover
10.
Screen Protect Film x 1
(Option)
11.
Cable (USB or RS232)
(Option)
12.
Ear-Phone Set (STEREO) with Microphone
(Option)
Cradle Packing List
N.O.
Item
10/20/2003
Notes
PC320 Cradle
Quick Installation Guide
Intercom provide
Standard USB Sync Cable
(or RS232 Cable)
Ethernet Module
(Option)
Multi-Link Join
(Option)
Accessory List
N.O.
10/20/2003
Item
Notes
1.
Stylus Pen (3 in 1)
2.
USB Sync Cable for PC320
3.
Standard Battery Pack (1800mAh)
4.
Ear/Micro-phone
5.
RS232 Serial Cable for PC320
6.
Hand Strap with Protect Rubber
7.
PC320 Cradle
8.
USB Sync Cable for Cradle
9.
RS232 Serial Cable for Cradle
9Pin
10.
USB Ethernet Module for Cradle
10 base-T Future
11.
MSR (Magnetic Stripe card Reader)
Bita Provide
12.
Screen Protect Film (4 in 1)
Future
Priority
Status 0
Default
Status 1
After Status 0
Status 2
After Status 1
Status 3
After Status 2
Future: Thinking about it but do nothing about it.
FCC Information to User
Information of the responsible party for a DoC product
Company Name: PSC SCANNING INC./PSC Scanning, Inc
Address: 959 Terry Street Eugene, OR 97402 U.S.A.
Contact: MR. JERRY KALINA
Telephone: (541)683-5700
Fax: (541)345-7140
Federal Communications Commission (FCC) Requirements, Part 15
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
---Consult the dealer or an experienced radio/TV technician for help.
Regulatory information / Disclaimers
Installation and use of this PDA must be in strict accordance with the instructions included in the user
documentation provided with the product. Any changes or modifications (including the antennas) made
to this device that are not expressly approved by the manufacturer may void the user’s authority to
operate the equipment. The manufacturer is not responsible for any radio or television interference
caused by unauthorized modification of this device, or the substitution of the connecting cables and
equipment other than manufacturer specified. It is the responsibility of the user to correct any
interference caused by such unauthorized modification, substitution or attachment. Manufacturer and
its authorized resellers or distributors will assume no liability for any damage or violation of
government regulations arising from failing to comply with these guidelines.
MPORTANT NOTE (CO-LOCATION)
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
SAR Exposure
This device has been tested for compliance with FCC RF Exposure (SAR) limits in typical flat
configurations.
In order to comply with SAR limits established in the ANSI C95.1 standards, it is recommended when
using a PDA that the integrated antenna is positioned more than 1.5cm from your body or nearby
persons during extended periods of operation. If the antenna is positioned less than 1.5cm from the user,
it is recommended that the user limit the exposure time.
CE Declaration of Conformity
For the following equipment: PDA
0984
Is herewith confirmed to comply with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States relating to
Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC)
and the Amendment Directive (93/68/EEC), the procedures given in European
Council Directive 99/5/EC and 89/3360EEC.
The equipment was passed. The test was performed according to the following
European standards:
EN 300 328 V.1.4.1 (2003-04)
EN 301 489-1 V.1.3.1 (2001-09) / EN 301 489-17 V.1.1.1 (2000-09)
EN 301 893 V.1.2.2 (2003-06)
EN 50371: 2002
EN 60950: 2000
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2004:04:29 12:00:57+08:00 Create Date : 2003:10:20 21:45:35+08:00 Page Count : 17 Creation Date : 2003:10:20 21:45:35+08:00 Mod Date : 2004:04:29 12:00:57+08:00 Producer : Acrobat Distiller 5.0 (Windows) Author : JasonYeh Metadata Date : 2004:04:29 12:00:57+08:00 Creator : JasonYeh Title : PC021 Ver0 Page Mode : UseNone Has XFA : No Tagged PDF : NoEXIF Metadata provided by EXIF.tools