Datalogic Scanning Gryphon D432 Users Manual Lynx™

2015-02-02

• DISCLAIMER
• GENERAL VIEW
• 1 COMPLIANCE
  • FCC COMPLIANCE
  • LASER SAFETY
    • LED Illuminator
    • Aiming System
      • WEEE COMPLIANCE
      • POWER SUPPLY
      • PATENTS
      • WARRANTY
      • SERVICES AND SUPPORT
• 2 INTRODUCTION
  • 2.1 GRYPHON™ D432/D432E DESCRIPTION
  • 2.2 PACKAGE CONTENTS
  • 2.3 CONFIGURATION METHODS
    • 2.3.1 Reading Configuration Codes
    • 2.3.2 Using VisualSetup
    • 2.3.3 Sending Configuration Strings from Host
• 3 USING GRYPHON™ D432/D432E
  • 3.1 AIMING SYSTEM
  • 3.2 NORMAL OPERATION
  • 3.3 IMAGE CAPTURING
    • 3.3.1 Basic Configuration Parameters
    • 3.3.2 Advanced Configuration Parameters
  • 3.4 AUTOSCANNING
    • 3.4.1 Normal Mode
    • 3.4.2 Pattern Mode
    • 3.4.3 Stand Autorecognition
  • 3.5 CAMERA CONTROL
  • 3.6 DEFINING DATA FORMATTING
    • 3.6.1 Concatenation
      • One Code Per Scan
      • All Codes Per Scan
• 4 INITIAL SETUP
  • 4.1 RS232 INTERFACE SELECTION
  • 4.2 WEDGE INTERFACE SELECTION
  • 4.3 USB INTERFACE SELECTION
    • START-UP
• 5 CONFIGURATION USING CODE SYMBOLS
  • 5.1 DEFAULT SETTINGS
  • 5.2 CHANGING DEFAULT SETTINGS
    • Concatenation Options
  • 5.3 ADVANCED DATA FORMAT
    • 5.3.1 Format Definition
      • Method 1 - Extracting Information from Barcode
      • Method 2 - Manipulating the Barcode Data
    • 5.3.2 Match Conditions
    • 5.3.3 Format Enable/Disable
    • 5.3.4 Mismatch Result
• 6 REFERENCES
  • 6.1 RS232 – USB COM
    • 6.1.1 ACK/NACK Protocol
    • 6.1.2 RX Timeout
  • 6.2 USB KEYBOARD
    • 6.2.1 Keyboard Speed
  • 6.3 CODE SELECTION
    • 6.3.1 Issue Identical Codes
  • 6.4 READING PARAMETERS
    • 6.4.1 Safety Time
  • 6.5 CONFIGURATION EDITING COMMANDS
• 7 TEST CODE SYMBOLS
• 8 MAINTENANCE
• 9 TECHNICAL FEATURES
  • 9.1 INDICATORS
    • 9.1.1 Gryphon™ D432/D432E LED Indicators
    • 9.1.2 Beeper
    • 9.1.3 Good Read Spot
      • FUNCTION DESCRIPTION