Datalogic Scanning Gryphon D432 Users Manual Lynx™
D432E to the manual d05adb6a-1dee-4f26-9af5-81bbe26cd742
2015-02-02
: Datalogic-Scanning Datalogic-Scanning-Gryphon-D432-Users-Manual-425535 datalogic-scanning-gryphon-d432-users-manual-425535 datalogic-scanning pdf
Open the PDF directly: View PDF 
.
Page Count: 164 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- DISCLAIMER
- GENERAL VIEW
- 1 COMPLIANCE
- 2 INTRODUCTION
- 3 USING GRYPHON™ D432/D432E
- 4 INITIAL SETUP
- 5 CONFIGURATION USING CODE SYMBOLS
- 6 REFERENCES
- 7 TEST CODE SYMBOLS
- 8 MAINTENANCE
- 9 TECHNICAL FEATURES
Reference Manual
Australia
Datalogic Scanning Pty Ltd
North Ryde, Australia
Telephone: [61] (2) 9870 3200
Fax: [61] (2) 9878 8688
France and Benelux
Datalogic Scanning Sarl
LES ULIS Cedex, France
Telephone: [33].01.64.86.71.00
Fax: [33].01.64 46.72.44
Germany
Datalogic Scanning GmbH
Darmstadt, Germany
Telephone: 49 (0) 61 51/93 58-0
Fax: 49 (0) 61 51/93 58 58
Italy
Datalogic Scanning SpA
Vimercate (MI), Italy
Telephone: [39] (0) 39/62903.1
Fax: [39] (0) 39/6859496
Japan
Datalogic Scanning KK
Shinagawa, Tokyo, Japan
Telephone: 81 (0)3 3491 6761
Fax: 81 (0)3 3491 6656
Latin America
Datalogic Scanning, Inc
Miami, Florida, USA
Telephone: (305) 591-3222
Fax: (305) 591-3007
Spain and Portugal
Datalogic Scanning Sarl
Sucursal en España
Madrid, Spain
Telephone: 34 91 746 28 60
Fax: 34 91 742 35 33
United Kingdom
Datalogic Scanning LTD
Watford, England
Telephone: 44 (0) 1923 809500
Fax: 44 (0) 1923 809 505
www.scanning.datalogic.com
Datalogic Scanning, Inc.
959 Terry Street
Eugene, OR 97402
Telephone: (541) 683-5700
Fax: (541) 345-7140
©2007 Datalogic Scanning, Inc. 820001980 (Rev. A) 10/07
Gryphon™ D432/D432E
Datalogic Scanning, Inc.
959 Terry Street
Eugene, Oregon 97402
Telephone: (541) 683-5700
Fax: (541) 345-7140
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the
procedures described therein may be reproduced or transmitted in any form or by any means
without prior written per-mission of Datalogic Scanning, Inc. or its subsidiaries or affiliates
("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products are hereby granted a non-
exclusive, revocable license to reproduce and transmit this documentation for the purchaser's
own internal business purposes. Purchaser shall not remove or alter any proprietary notices,
including copyright notices, contained in this documentation and shall ensure that all notices
appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by
contacting your Datalogic representative. Electronic versions may either be downloadable from
the Datalogic website (www.scanning.datalogic.com) or provided on appropriate media. If you
visit our website and would like to make comments or suggestions about this or other Datalogic
publications, please let us know via the "Contact Datalogic" page.
DISCLAIMER
Datalogic has taken reasonable measures to provide information in this manual that is complete
and accurate, however, Datalogic reserves the right to change any specification at any time
without prior notice. Datalogic is a registered trademark of Datalogic S.p.A. in many countries
and the Datalogic logo is a trademark of Datalogic S.p.A. all licensed to Datalogic Scanning,
Inc. All other trademarks and trade names referred to herein are property of their respective
owners.
iii
CONTENTS
Disclaimer .....................................................................................................iii
GENERAL VIEW .......................................................................................... v
1 COMPLIANCE.............................................................................................VI
FCC Compliance..........................................................................................vii
Laser Safety.................................................................................................vii
WEEE Compliance .......................................................................................xi
Power Supply................................................................................................xi
PATENTS .................................................................................................... xi
WARRANTY................................................................................................ xi
SERVICES AND SUPPORT....................................................................... xii
2 INTRODUCTION .......................................................................................... 1
2.1 Gryphon™ D432/D432E Description ............................................................ 1
2.2 Package Contents......................................................................................... 2
2.3 Configuration Methods.................................................................................. 2
2.3.1 Reading Configuration Codes ....................................................................... 2
2.3.2 Using VisualSetup......................................................................................... 2
2.3.3 Sending Configuration Strings from Host...................................................... 2
3 USING GRYPHON™ D432/D432E .............................................................. 3
3.1 Aiming System.............................................................................................. 3
3.2 Normal Operation.......................................................................................... 4
3.3 Image Capturing ........................................................................................... 4
3.3.1 Basic Configuration Parameters ................................................................... 5
3.3.2 Advanced Configuration Parameters ............................................................ 6
3.4 Autoscanning ................................................................................................ 7
3.4.1 Normal Mode ................................................................................................ 7
3.4.2 Pattern Mode ................................................................................................ 7
3.4.3 Stand Autorecognition................................................................................... 8
3.5 Camera Control............................................................................................. 8
3.6 Defining Data Formatting .............................................................................. 9
3.6.1 Concatenation............................................................................................. 10
4 INITIAL SETUP .......................................................................................... 11
4.1 RS232 Interface Selection .......................................................................... 11
4.2 Wedge Interface Selection.......................................................................... 12
4.3 USB Interface Selection.............................................................................. 13
Start-Up....................................................................................................... 13
iv
5 CONFIGURATION USING CODE SYMBOLS ........................................... 16
5.1 Default Settings........................................................................................... 17
5.2 Changing Default Settings .......................................................................... 22
5.3 Advanced Data Format ............................................................................... 94
5.3.1 Format Definition......................................................................................... 95
5.3.2 Match Conditions ...................................................................................... 112
5.3.3 Format Enable/Disable ............................................................................. 114
5.3.4 Mismatch Result ....................................................................................... 115
6 REFERENCES ......................................................................................... 116
6.1 RS232 – USB COM .................................................................................. 116
6.1.1 ACK/NACK Protocol ................................................................................. 116
6.1.2 RX Timeout............................................................................................... 116
6.2 USB Keyboard .......................................................................................... 117
6.2.1 Keyboard Speed ....................................................................................... 117
6.3 Code Selection.......................................................................................... 117
6.3.1 Issue Identical Codes................................................................................ 117
6.4 Reading Parameters ................................................................................. 117
6.4.1 Safety Time............................................................................................... 117
6.5 Configuration Editing Commands ............................................................. 118
7 TEST CODE SYMBOLS........................................................................... 119
8 MAINTENANCE ....................................................................................... 121
9 TECHNICAL FEATURES......................................................................... 122
9.1 Indicators .................................................................................................. 125
9.1.1 Gryphon™ D432/D432E LED Indicators................................................... 125
9.1.2 Beeper ...................................................................................................... 125
9.1.3 Good Read Spot ....................................................................................... 125
Function Description ................................................................................. 139
v
GENERAL VIEW
Gryphon™ D432/D432E
Figure A
Green LED
vi
1 COMPLIANCE
Figure B - Gryphon™ D432/D432E Reader Product Labels
Aiming System Laser Beam
Output Window
vii
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval of
Datalogic could void the authority to use this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference which may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
LASER SAFETY
The Gryphon™ D432/D432E hand-held reader is a Class 1 LED product regarding
its Illuminator and a Class 2 laser product regarding its Aiming System.
LED Illuminator
The use of an illuminator in the Gryphon™ D432/D432E hand-held reader is a Class
1 LED product:
ILLUMINATORE LED CLASSE 1
AUSLEUCHTER LED KLASSE 1
ILLUMINATEUR A LED DE CLASSE 1
ILUMINADOR LED DE CLASE 1
viii
Aiming System
The Gryphon™ D432/D432E aiming system meets the requirements for laser safety.
AVOID EXPOSURE LASER LIGHT IS EMITTED FROM THIS APERTURE
CAUTION-CLASS 2 LASER LIGHT WHEN OPEN
LASER LIGHT - DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAX. OUTPUT RADIATION 0.25 mW - EMITTED WAVELENGTH 640~660 nm
TO EN 60825-1:2001
LASERSTRAHLUNG – NICHT IN DEN STRAHL BLICKEN
LASER KLASSE 2
MAX. AUSGANGSLEISTUNG 0.25 mW - WELLENLÄNGE 640~660 nm
TO EN 60825-1:2001
DO NOT STARE
INTO BEAM
This product complies with
21 CFR Subchapter J
I D F E
LA LUCE LASER È
VISIBILE ALL'OCCHIO
UMANO E VIENE
EMESSA DALLA
FINESTRA INDICATA
NELLA FIGURA.
DIE LASER-
STRAHLUNG IST FÜR
DAS MENSCHLICHE
AUGE SICHTBAR UND
WIRD AM STRAHLAUS-
TRITTSFENSTER
AUSGESENDET
(SIEHE BILD)
LE RAYON LASER EST
VISIBLE À L'OEIL NU
ET IL EST ÉMIS PAR
LA FENÊTRE
DÉSIGNÉE SUR
L'ILLUSTRATION DANS
LA FIGURE
A LUZ LÁSER ES
VISIBLE AL OJO
HUMANO Y ES
EMITIDA POR LA
VENTANA INDICADA
EN LA FIGURA.
LUCE LASER NON
FISSARE IL FASCIO
APPARECCHIO LASER
DI CLASSE 2 MASSIMA
POTENZA D'USCITA:
LUNGHEZZA D'ONDA
EMESSA:
CONFORME A EN
60825-1 (2001)
LASERSTRAHLUNG
NICHT IN DEN STRAHL
BLICKEN PRODUKT
DER LASERKLASSE 2
MAXIMALE
AUSGANGSLEISTUNG:
WELLENLÄGE:
ENTSPR. EN 60825-1
(2001)
RAYON LASER EVITER
DE REGARDER LE
RAYON APPAREIL
LASER DE CLASSE 2
PUISSANCE DE
SORTIE:
LONGUEUR D'ONDE
EMISE:
CONFORME A EN
60825-1 (2001)
RAYO LÁSER NO
MIRAR FIJO EL RAYO
APARATO LÁSER DE
CLASE 2 MÁXIMA
POTENCIA DE SALIDA:
LONGITUD DE ONDA
EMITIDA:
CONFORME A EN
60825-1 (2001)
ENGLISH
The following information is provided to comply with the rules imposed by
international authorities and refers to the correct use of your terminal.
STANDARD LASER SAFETY REGULATIONS
This product conforms to the applicable requirements of both CDRH 21 CFR 1040
and EN 60825-1 at the date of manufacture.
For installation, use and maintenance, it is not necessary to open the device.
WARNING
Use of controls or adjustments or performance of procedures other
than those specified herein may result in exposure to hazardous
visible laser light.
ix
The product utilizes a low-power laser diode. Although staring directly at the laser beam
momentarily causes no known biological damage, avoid staring at the beam as one
would with any very strong light source, such as the sun. Avoid that the laser beam hits
the eye of an observer, even through reflective surfaces such as mirrors, etc.
ITALIANO
Le seguenti informazioni vengono fornite dietro direttive delle autorità internazionali e
si riferiscono all’uso corretto del terminale.
NORMATIVE STANDARD PER LA SICUREZZA LASER
Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data
di produzione: CDRH 21 CFR 1040 e EN 60825-1.
Non si rende mai necessario aprire l’appa-recchio per motivi di installazione, utilizzo
o manutenzione.
ATTENZIONE
L'utilizzo di procedure o regolazioni differenti da quelle descritte
nella documentazione può provocare un'esposizione pericolosa
a luce laser visibile.
Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni
riportati dall’occhio umano in seguito ad una esposizione di breve durata, evitare di
fissare il raggio laser così come si eviterebbe qualsiasi altra sorgente di luminosità
intensa, ad esempio il sole. Evitare inoltre di dirigere il raggio laser negli occhi di un
osservatore, anche attraverso superfici riflettenti come gli specchi.
DEUTSCH
Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die von
internationalen Behörden auferlegt wurden, und sie beziehen sich auf den korrekten
Gebrauch vom Terminal.
NORM FÜR DIE LASERSICHERHEIT
Dies Produkt entspricht am Tag der Herstellung den gültigen EN 60825-1 und CDRH
21 CFR 1040 Normen für die Lasersicherheit.
Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und Wartungs-
Arbeiten zu öffnen.
ACHTUNG
Jegliche Änderungen am Gerät sowie Vorgehensweisen, die nicht
in dieser Betriebsanleitung beschreiben werden, können ein
gefährliches Laserlicht verursachen.
Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von
kurzen Einstrahlungen bekannt sind, sollten Sie es vermeiden für längere Zeit in den
x
Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die Sonne).
Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines Beobachters, noch
gegen reflektierende Oberflächen zu richten.
FRANÇAIS
Les informations suivantes sont fournies selon les règles fixées par les autorités
internationales et se réfèrent à une correcte utilisation du terminal.
NORMES DE SECURITE LASER
Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de
fabrication: CDRH 21 CFR 1040 et EN 60825-1.
Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou l’entretien.
ATTENTION
L'utilisation de procédures ou réglages différents de ceux donnés
ici peut entraîner une dangereuse exposition à lumière laser
visible.
Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été
constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement le
rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter aussi
de diriger le rayon vers les yeux d’un observateur, même à travers des surfaces
réfléchissantes (miroirs, par exemple).
ESPAÑOL
Las informaciones siguientes son presentadas en conformidad con las disposiciones
de las autoridades internacionales y se refieren al uso correcto del terminal.
NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER
Este aparato resulta conforme a las normativas vigentes de seguridad láser a la
fecha de producción: CDRH 21 CFR 1040 y EN 60825-1.
No es necesario abrir el aparato para la instalación, la utilización o la manutención.
ATENCIÓN
La utilización de procedimientos o regulaciones diferentes de
aquellas describidas en la documentación puede causar una
exposición peligrosa a la luz láser visible.
El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los ojos
humanos a consecuencia de una exposición de corta duración. Eviten de mirar fijo el
rayo láser así como evitarían cualquiera otra fuente de luminosidad intensa, por
ejemplo el sol. Además, eviten de dirigir el rayo láser hacia los ojos de un
observador, también a través de superficies reflectantes como los espejos.
xi
CAUTION
The Gryphon™ D432/D432E Hand-Held Reader is not user-
serviceable. Opening the case of the unit can cause internal
damage and will void the warranty.
WEEE COMPLIANCE
POWER SUPPLY
This device is intended to be connected to a UL Listed/CSA Certified computer which
supplies power directly to the reader or else be supplied by a UL Listed/CSA Certified
Power Unit marked "Class 2" or LPS power source rated 5 V, minimum 330 mA,
which supplies power directly to the reader via the power connector of the cable.
PATENTS
This product is covered by one or more of the following patents:
U.S. patents: 6,512,218 B1; 6,808,114 B1; 6,877,664 B1 and 6,478,226 B2.
European patent: 1,128,315 B1.
Additional patents pending.
WARRANTY
Datalogic warranties this product against defects in workmanship and materials, for a
period of 5 years from the date of shipment, provided that the product is operated
under normal and proper conditions.
Datalogic has the faculty to repair or replace the product; these provisions do not
prolong the original warranty term.
The warranty does not apply to any product that has been subject to misuse,
accidental damage, unauthorized repair or tampering.
xii
SERVICES AND SUPPORT
Datalogic provides several services as well as technical support through its website.
Log on to www.scanning.datalogic.com and click on the links indicated for further
information including:
• PRODUCTS
Search through the links to arrive at your product page where you can download
specific Manuals and Software & Utilities including:
- VisualSetup a Windows-based utility program allowing device configuration
using a PC. It provides RS232 interface configuration as well as configuration
barcode printing.
• SERVICES & SUPPORT
- Datalogic Services - Warranty Extensions and Maintenance Agreements
- Authorised Repair Centres
• CONTACT US
E-mail form and listing of Datalogic Subsidiaries
INTRODUCTION
1
2 INTRODUCTION
2.1 GRYPHON™ D432/D432E DESCRIPTION
The Gryphon™ D432/D432E reader is an omni-directional barcode scanner having
the following characteristics:
Plug and Play The Gryphon™ D432/D432E is very ergonomic and user-
friendly for intuitive operation and is equipped with plug-and-
play enhanced Multistandard Architecture. It can be connected
to a Host PC through a USB, RS232 or Wedge emulation cable.
Omni-directional
Operating
To read a symbol or capture an image, you simply aim the
reader and pull the trigger. Since Gryphon™ D432/D432E is a
powerful omni-directional reader, the orientation of the symbol
is not important.
Decoding Thanks to powerful algorithms, Gryphon™ D432/D432E reliably
decodes all major 1D (linear) barcodes, 2D stacked codes (such
as PDF417), 2D matrix symbols (such as DataMatrix), postal
codes (such as POSTNET, PLANET). The data stream —
acquired from decoding a symbol — is rapidly sent to the host.
The reader is immediately available to read another symbol.
Formatting and
Concatenating
The string of a decoded code may be processed according to
either a simple or advanced data formatting and be concatenated
to other codes (up to 4 different codes).
Imaging Gryphon™ D432/D432E can also function as a camera by
capturing entire images or image portions of labels, signatures,
and other items. Two different control modes are available for
managing the camera exposure and calibration.
Autoscanning An autoscan command causes the reader to scan continuously
and to monitor the central zone of its reading area.
Flash Memory Flash technology allows to upgrade the Gryphon™
D432/D432E reader as new symbologies are supported or as
improved decoding algorithms become available.
GRYPHON™ D432/D432E
2
2.2 PACKAGE CONTENTS
The following parts are included in the Gryphon™ D432/D432E package contents:
• Gryphon™ D432/D432E Hand-Held Reader
• Gryphon™ D432/D432E Quick Reference Manual
You may want to save your packing material in case you need to ship the reader at
some later time.
2.3 CONFIGURATION METHODS
2.3.1 Reading Configuration Codes
This m\anual can be used for complete setup and configuration. If you wish to
change the default settings, you can configure the Gryphon™ D432/D432E reader by
reading the programming code symbols in this manual. Configuration commands and
their relative arguments are read individually using the symbols in this manual. See
Appendix D.
2.3.2 Using VisualSetup
The Datalogic VisualSetup program, available on the website, allows programming
the reader by selecting configuration commands or printing them through a user-
friendly graphical interface running on the PC. These commands are sent to the
reader over the current communication interface; or they can be printed to be read.
2.3.3 Sending Configuration Strings from Host
An alternative configuration method is provided in Appendix A using the RS232 or
USB COM interface. This method is particularly useful when many devices need to
be configured with the same settings. Batch files containing the desired parameter
settings can be prepared to configure devices quickly and easily.
USING GRYPHON™ D432/D432E
3
3 USING GRYPHON™ D432/D432E
3.1 AIMING SYSTEM
The Gryphon™ D432/D432E reader uses an intelligent aiming system. By pulling the
trigger, the aiming system indicates a field of view, which should be positioned over
the code:
Figure 1 - Aiming System
When you pull the trigger a red beam illuminates the code. If the aiming system is
centered and the entire symbology is within the aiming system, you will get a good
read. The field of view changes size as you move the reader closer or farther away
from the code.
Linear barcode 2D Matrix symbol
Figure 2 - Relative Size and Location of Aiming System Pattern
GRYPHON™ D432/D432E
4
The field of view indicated by the aiming system will be smaller when the
Gryphon™ D432/D432E is closer to the code and larger when it is farther from the
code. Symbologies with smaller bars or elements (mil size) should be read closer to
the unit. Symbologies with larger bars or elements (mil size) should be read farther
from the unit. (See chapter 9 for further details).
3.2 NORMAL OPERATION
Gryphon™ D432/D432E normally functions by capturing and decoding codes.
Point the reader at the target and pull the trigger to enable the aiming system and the
illuminator (red beam) to capture and decode the image. The aiming system will
briefly switch off during the acquisition time and if no code is decoded will switch on
again before the next acquisition. The illuminator will remain on until the symbol is
decoded.
As you are reading code symbols, adjust the distance at which you are holding the
reader.
The Aiming System Delay parameter can be used to set a delay between the
activation of the aiming system and the activation of the illuminator. This allows more
time to center the reader over the target before image acquisition.
NOTE
The Gryphon™ D432/D432E hand-held reader aiming system is
designed for general reading and decoding of 1D and 2D symbols.
Some variation in reading distance will occur due to narrow bar width
and other factors.
NOTE
If reading codes positioned on reflective surfaces, it may be
necessary to tilt the reader with respect to the barcode and/or set the
Camera Control parameters (see page 50).
3.3 IMAGE CAPTURING
Gryphon™ D432/D432E can also function as a camera by capturing images of
labels, signatures, and other items.
In order to capture an image, the user should read a Capture Image code (see
page 73), then point at the image subject and pull the trigger. This way, the image
will be captured and sent to the host PC. Gryphon™ D432/D432E then returns to
USING GRYPHON™ D432/D432E
5
normal operation. To capture another image you must read another Capture Image
Code of the same or a different Preset Configuration.
You can use the aiming system to position the reader from the object (ensure the
reader is about centered over the target). Adjust the distance at which you are
holding the reader (see Figure 2).
If the RS232 interface has been selected, the image will be transferred to the host
PC via XMODEM_1K protocol.
NOTE
Image capturing is not available in Wedge and USB Keyboard
Emulation interfaces and is not compatible with Autoscanning nor
when the Software trigger type is selected.
Up to four different and independent Image Presets can be defined (see page 74).
For each Image Preset you may set up to three Basic Configuration Parameters, and
up to five Advanced Configuration Parameters. Therefore an image is processed
before being sent to the Host, according to a preset group of parameters.
3.3.1 Basic Configuration Parameters
The Image file formats supported are: BMP, TIFF, JPEG (default).
Two resolution options are available: VGA Resolution (640 x 480 pixels) (default),
and CIF Resolution (320 x 240 pixels). The lower resolution setting yields smaller file
sizes, so the transfer time decreases.
For JPEG images it is possible to define the Image Quality level to address tradeoff
between image file size and quality.
GRYPHON™ D432/D432E
6
3.3.2 Advanced Configuration Parameters
An image portion (Window), instead of an entire image, can be captured. This
parameter is generally used for particular fixed reading position applications.
X
Y
640
480
0 X0
Y0
height
width
An Image Window may either be as large as the image itself or smaller (10 x 10
pixels minimum), and is defined by its origin (the coordinate X0, Y0), its width (number
of pixels along the X Axis) and its height (number of pixels along the Y Axis).
By default, for all Image Presets, the window has its origin coordinates equal to zero,
its width equal to 640 pixels and its height to 480 pixels.
It is possible to perform Zooming of the image. The zoom range varies from 20% up
to 200% in steps of 20%, so ten different settings are available. Default is 100% (no
zoom).
In addition to Windowing and Zoom you can adjust Brightness and Contrast levels.
Brightness Adjustment is available in the range from –100% up to 100%, in steps of
1%. Positive values shift the luminance up so that the image will result brighter.
Default value is 0%, meaning that no brightness adjustment is performed.
The same range of values (–100% up to 100%, in steps of 1%) is available for
Contrast Adjustment. Positive values will increase the contrast, so that dark and
USING GRYPHON™ D432/D432E
7
bright objects inside the image will be better distinguishable. Default value is 0%,
which means that no contrast adjustment is performed.
You can set the Image Color Depth by selecting 256 gray levels (default), 16 gray
levels, or 2 gray levels. Higher color depths yield larger image files. This option is
ignored if the JPEG format is selected, (256 gray levels only).
3.4 AUTOSCANNING
3.4.1 Normal Mode
Gryphon™ D432/D432E provides an autoscan command (see page 70), which
when enabled, causes the reader to scan continuously and to monitor the central
zone of its reading area. In this way, Gryphon™ D432/D432E is ready to capture any
image (containing a potential code) positioned on a uniform background.
The aiming system can be enabled to indicate the reading area of the potential code
to be captured. The illumination system can also be enabled when the ambient light
conditions are not sufficient to autodetect the potential code to be captured;
furthermore, the illumination system increases in intensity for an instant when
capturing and decoding an image. A safety time may be defined to prevent
Gryphon™ D432/D432E from reading the same code repeatedly.
If the decoding is completed successfully, the reader starts monitoring the reading
area again. In case of decoding failure, Gryphon™ D432/D432E keeps on decoding
until a potential code is present in the central zone of the reading area.
3.4.2 Pattern Mode
The Autoscan pattern mode is particularly advised when reading barcodes positioned
on a non-uniform background. In these cases Gryphon™ D432/D432E may perceive
some elements of the background as barcodes and start the decoding. To avoid this
undesired effect, the Autoscan Pattern Code is placed in the Gryphon™ D432/D432E
reading area which prevents decoding. Using this code as the background, code
reading takes place normally by presenting desired codes to be read over the Pattern
Code. Between each code read, the Pattern Code must be represented to
Gryphon™ D432/D432E.
The Pattern Code can be printed from the file of the manual (Appendix D) available
on the CD-ROM.
In case of low ambient light conditions, Gryphon™ D432/D432E automatically
activates the illumination system. If desired, the illumination system can be enabled
so that it is always active.
GRYPHON™ D432/D432E
8
3.4.3 Stand Autorecognition
Pair the reader to the stand paying attention to insert the handle into the stand clip.
Correct insertion will be signaled by a beep; then, the reader will be ready to read
barcodes. Read the configuration codes at page 70 to automatically enter in Normal
or Pattern Autoscanning mode.
3.5 CAMERA CONTROL
Exposure and Calibration
Two different control modes are available for managing the camera: automatic mode
and fixed mode.
The automatic mode provides three different options to get the best tuning of the
image to be captured:
- Automatic based on entire image: camera control mode based on the analysis of
the whole image. This mode works well in most standard applications. It is the
default setting.
- Automatic based on central image: camera control mode based on the analysis
of a restricted area positioned in the central zone of the image. This mode is
suggested when reading small codes positioned in a dark and extensive
background.
- Automatic for highly reflective surfaces: camera control mode allowing to read
codes on highly reflective surfaces. This mode is suggested, for example, when
reading codes positioned on plastic or metal surfaces.
The fixed mode is particularly suggested for expert users. It requires a camera
calibration to adjust the acquisition parameters to the ambient light conditions. The
defined values will always be used when working with a fixed exposure.
These values are permanently saved in the reader memory.
Refer to page 50 for configuration codes.
Aiming System Calibration
The factory-defined Gryphon™ D432/D432E aiming system is already correctly and
precisely calibrated to the Gryphon™ D432/D432E focus distance and therefore
works for the most typical applications. However, it is possible to modify the aiming
system precision for the following condition:
USING GRYPHON™ D432/D432E
9
when a fixed reading distance different from the Gryphon™ D432/D432E focus
distance is used. The Gryphon™ focus distance is 115 mm for Gryphon™ D432,
and 65 mm for Gryphon™ D432E.
Refer to the VisualSetup software program for performing the aiming system
calibration.
3.6 DEFINING DATA FORMATTING
The string of a decoded code to be sent to the host may be formatted as follows:
• defining simple data formatting (see page 40);
• defining advanced data formatting giving complete flexibility in changing the
format of data (see par. 5.3).
When both simple and advanced data formatting are selected the info is processed in
the following order:
1. the string of the decoded code is processed according to the advanced
formatting rules;
2. the resulting string is processed according to the selection type rules of the
simple data formatting;
3. character substitution is performed on the resulting string;
4. character deletion is performed on the resulting string;
5. code concatenation is performed;
6. code ID is attached to the resulting string;
7. global headers and terminators are attached to the resulting string;
The codes to be sent to the host may also be selected or ordered depending on the
following two conditions:
• one code per scan: Gryphon™ D432/D432E sends the code being closest to
the image center. If the "Central Code Transmission" command is enabled, only
the code containing the image center will be transmitted (see page 69);
• all codes per scan: the codes to be sent to the host may be ordered either by
length or by symbology starting from the code being closest to the image center
(see page 69). When enabling both these criteria, codes belonging to the same
symbology are sent to the host depending on their length.
GRYPHON™ D432/D432E
10
3.6.1 Concatenation
It is possible to concatenate up to 4 different codes, set their length and enable the
intercode delay between them (the intercode delay is set in the specific interface
parameters, see page 25, 27 and 32). When enabling the delay one or more global
headers and terminators are added to the decoded data. The concatenation
procedure may occur in different ways depending on the number of codes to be
decoded per image:
One Code Per Scan
• If the code resulting from the single decoding of an image belongs to one of the
code families to be concatenated, it is saved to the Gryphon™ D432/D432E
memory waiting for other codes to complete the concatenation.
• If the code belongs to the same family of a code previously saved, it overwrites
the old one.
• If the code resulting from the decoding does not belong to one of the code
families to be concatenated, it causes the concatenation failure and clears the
temporary memory. If the "Concatenation Failure Transmission" command is set
to "Tx codes causing failure" (see page 48), this code will be sent in the output
message.
All Codes Per Scan
• All codes resulting from the decoding of an image and belonging to one of the
families to be concatenated are saved to the Gryphon™ D432/D432E memory
waiting for other codes to complete the concatenation.
• If one or more codes resulting from the decoding belong to the same family of
codes previously saved, they overwrite the old ones.
• When the image contains no code to be concatenated, the concatenation fails
and the reader temporary memory is cleared. If the "Concatenation Failure
Transmission" command is set to "Tx codes causing failure" (see page 48), the
codes causing the concatenation failure will be sent in the output message.
INITIAL SETUP
11
4 INITIAL SETUP
This procedure allows setting up the reader to operate with the default settings:
Whenever you need to change the default values refer to par. 5.2.
4.1 RS232 INTERFACE SELECTION
The Gryphon™ D432/D432E reader requires the RS232 interface cable and the
AC/DC power adapter to be connected.
To install and configure your reader with the RS232 interface, follow these
instructions:
Make all system connections as shown in Figure 3:
1.
Figure 3 - RS232 Connection
Read the restore default parameter code below:
2.
Restore Default
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
Read the RS232 interface selection code:
3.
RS232
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJAKFEHFKK
AMGNPJCJGIIJCMCEGJMHNDOLLK
AIFBJLBGMHPLNKECPCGMBBIBOK
AAPHBAJJDAAGMGKDDAOHBGGLHK
AEKFBONJCDDIECLFJIJKMCHLIK
DLDDLDLDLLDLLLLDLLDDDLDLLL
4. Power up your PC.
RS232 is the default interface set at the factory.
GRYPHON™ D432/D432E
12
4.2 WEDGE INTERFACE SELECTION
The Gryphon™ D432/D432E reader requires the Wedge interface cable.
To install and configure your reader with the Wedge interface, follow these
instructions:
Connect the cable to the Gryphon™ D432/D432E reader and to the PC as
shown in Figure 4.
1.
Power up your PC.
Figure 4 – Wedge Connections
Read the restore default parameter code below:
2.
Restore Default
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
Read the Wedge IBM AT interface selection code:
3.
Wedge – IBM AT
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJALFAEHKK
AEONPJCJGIIJCMCEHPLLHLPPJK
AIFBJLBGMHPLNPDFHGDGFIBDOK
AAPHBAJJCGCOPJDIMBCEANODDK
AFKFBPPJPJCAALOIKIECIPIKLK
DDLDLDLDDLDLLLLDDDDDDLDLDL
INITIAL SETUP
13
4.3 USB INTERFACE SELECTION
The Gryphon™ D432/D432E reader requires the USB interface cable (CAB-412)
and, if required, the AC/DC power adapter to be connected.
The USB interface is compatible:
Windows 98 (and later) IBM POS for Windows
Mac OS 8.0 (and later) 4690 Operating System
START-UP
As with all USB devices, upon connection, the Host performs several checks by
communicating with the Gryphon™ D432/D432E. During this phase the green LED
on the Gryphon™ D432/D432E reader blinks and normal operations are suspended.
Two basic conditions must be met before Gryphon™ D432/D432E is ready to read
codes: the correct USB driver must be loaded and sufficient power must be supplied
to the reader.
For all systems, the correct USB driver for the default USB-KBD interface or the USB
Generic HID interface is included in the Host Operating System and will either be
loaded automatically or will be suggested by the O.S. and should therefore be
selected from the dialog box (the first time only).
If the Host supplies sufficient power to the reader, the start-up phase ends correctly,
the green LED stops blinking and the reader emits the beep OK signal.
If the Host does not supply sufficient power to the reader, a dialog box will appear on
the Host and the reader will be blocked (green LED continues blinking). In this case,
disconnect the USB cable at the Host (green LED stops blinking), connect and
power-up an external supply to USB cable then reconnect the USB cable to the Host
and close the dialog box. The reader emits the beep OK signal. You can now read
codes. At this point you can read the USB interface configuration code according to
your application. Load drivers from the O.S. (if requested).
When configuring the USB-COM interface or DLBulkUSB interface, the relevant files
and drivers must be installed and can be downloaded from the web site
http://www.scanning.datalogic.com.
The reader is ready.
GRYPHON™ D432/D432E
14
FIRST START-UP
Does a dialog
box appear
warning that Bus
power is not
sufficient?
Green LED off
Select desired USB
interface code
(USB-KBD is default)
NO
YES
Read test codes.
Reader is READY
Load drivers
(if requested)
Load drivers
(if requested)
Green LED blinks
Green LED off - BEEP OK
BEEP OK
Connect
Gryphon™ D432/D432E to Host
Disconnect reader
at Host
Connect external
power supply to
cable and power up
Reconnect reader
cable to Host and
close dialog box
1.
2.
Successive start-ups will automatically recognize the previously loaded drivers. If
external power is used, verify that external power is already supplied.
SUCCESSIVE START-UPS
NO
YES
Read test codes.
Reader is READY
Green LED blinks
Green LED off - BEEP OK
BEEP OK
Connect Gryphon™ D432/D432E
to Host
Disconnect reader at Host
Connect external power supply to
cable and power up
Reconnect reader cable to
Host and close dialog box
Does a dialog box
appear warning
that Bus power is
not sufficient?
INITIAL SETUP
15
To install and configure your reader with one of the USB interfaces, see the "First
Start-up" diagram and follow these instructions.
Make all the Gryphon™ D432/D432E reader connections as shown in
Figure 5.
1.
Power up your PC.
Figure 5 – USB Connections
Read the desired USB interface selection code:
2.
USB-COM EMULATION USB-KBD EMULATION
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJALEAGEKK
AMONPJCJGIIJCMCFHLPMOOKNBK
AIFBJLBGMHPLMLAMDPIKFBLBOK
AAPHBAJICHGNBKOPLNBGLPAHFK
AHKFBNPHFKLEAOHGLPKOGDJLLK
DLDDLDLDDLDLLLLDDDLDDLDLDL
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJAKEDBEKK
AMGNPJCJGIIJCMCFHMNJLBJPHK
AIFBJLBGMHPKNMBGMJOJEHHAOK
AAPHBAJICDHCJBCNKPCNNJNFHK
AFLFBMPJIKPAMFFBBHKCCKNIKK
DLLDLDLDLLDLLLLDDDDDDLDLLL
USB BULK USB Generic HID
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJAKFDDHKK
AEGNPJCJGIIJCMCEHIJOCEMNPK
AIFBJLBGMHPKMICPIAFFEONCOK
AAPHBAJJCCDBHCPKNDBPGLDBBK
AHLFBOPHCJGEMAMPAAEOMGMJKK
DDDDLDLDLLDLLLLDDDLDDLDLLL
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJALEHCGKK
AEONPJCJGIIJCMCFGKKFBJILFK
AIFBJLBGMHPKNJGBENLDAOOCOK
AAPHBAJIDFFKKOLGFOOOMCFNDK
AELFBNNJFAOIIMAMCHHKGHCJJK
DDDDLDLDDLDLLLLDLLDDDLDLDL
If required
GRYPHON™ D432/D432E
16
5 CONFIGURATION USING CODE SYMBOLS
This section describes the programming method of using configuration code symbols
to program your reader. By using the Gryphon™ D432/D432E reader to read/decode
these special configuration symbols, you can configure, and obtain information from
its system software.
When you are reading configuration code symbols, carefully aim the
Gryphon™ D432/D432E 2D reader to avoid reading adjacent symbols.
The configuration code symbols in this chapter are divided into logical
sections according to the type of configuration required, (RS232 configuration,
Code selection, etc.). If arguments are required with a command, you can read
additional code labels (typically digits) from Appendix D.
To configure your reader:
1. Read the Enter Configuration code ONCE, available on top of each page.
2. Modify the desired parameters in one or more sections by reading the parameter
code and selecting the value from the Hex/Numeric table (see Appendix D) or by
following the given procedures.
3. Read the Exit and Save Configuration code ONCE, available on top of each
page.
Example for step 3:
To set the maximum length of characters in a Code 39 barcode symbol that the
reader will decode to 32:
• first read the Maximum Length symbol for Code 39 on page 53
• then read the symbol for the digit "3" and lastly the symbol for the digit "2" in
Appendix D.
CONFIGURATION USING CODE SYMBOLS
17
5.1 DEFAULT SETTINGS
Configuration Field Default Setting
RS232 Communication
Baud Rate 115200
Parity, Data Bits, Stop Bits No parity; 8 Data bits; 1 Stop bit
Handshake None
ACK/NACK Protocol None
FIFO Enabled
Intercharacter Delay 0
Intercode Delay 0
USB COM Emulation
Handshake None
ACK/NACK Protocol None
FIFO Enabled
Intercharacter Delay 0
Intercode Delay 0
USB Keyboard Emulation
FIFO Enabled
Intercharacter Delay 0
Intercode Delay 0
*Keyboard Nationality USA
*Keyboard Speed Normal
WEDGE-Communication
*Keyboard Nationality USA
CapsLock OFF
CapsLock Auto-Recognition ON
NumLock OFF
Intercharacter Delay 0
Intercode Delay 0
Data Format-Symbology Independent Parameters
Code Identifier Disabled
Custom Code Identifier Disabled
Code Length Disabled
*Header No headers
*Terminator CR and LF terminators for RS232, USB
BULK, USB COM, USB Generic HID
ENTER terminator for Wedge, USB
Keyboard
* The default values of these parameters are set when reading the interface selection.
GRYPHON™ D432/D432E
18
Configuration Field Default Setting
Data Format-Symbology Dependent Parameters
Symbology Specific Format Select All
Symbology Headers No headers
Symbology Terminators No terminators
Symbology Character Substitution No character to substitute
Symbology Character Deletion No character to delete
Data Format-Concatenation
Concatenation Disabled
Define Concatenation 2 EAN/UPC codes concatenated
Set First Concatenated Code Length 000 = any length
Set Second Concatenated Code Length 000 = any length
Set Third Concatenated Code Length 000 = any length
Set Fourth Concatenated Code Length 000 = any length
Concatenation with Intercode Delay Disabled
Concatenation Timeout 10 seconds
Concatenation Failure Transmission Tx codes causing failure
Transmission after Timeout No code transmission
Concatenation Result Code ID No code Identifier
Advanced Formatting
Format enable/disable Disabled
Camera Control
Exposure Mode Automatic, based on entire image
Code Selection
Issue Identical Codes Enabled
EAN/UPC/JAN
Selection Enabled
Add-On Disabled
UPCE Expansion Disabled
Code 39
Selection Enabled - no check digit
Code39 Full ASCII Disabled
Code Length Check Disabled
Minimum Length 001
Maximum Length 255
Start/Stop Character Disabled
CONFIGURATION USING CODE SYMBOLS
19
Configuration Field Default Setting
Code 32
Selection Disabled
Interleaved 2 of 5
Selection Enabled - check digit control and tx
Code Length Check Disabled
Minimum Length 014
Maximum Length 255
Codabar
Selection Disabled
Code Length Check Disabled
Minimum Length 001
Maximum Length 255
Code 128
Code128 Selection Enabled
Code Length Check Disabled
Minimum Length 001
Maximum Length 255
EAN 128
Selection Disabled
Code Length Check Disabled
Minimum Length 001
Maximum Length 255
Code 93
Selection Disabled
Code Length Check Disabled
Minimum Length 001
Maximum Length 255
RSS Family
RSS Expanded Disabled
RSS Limited Disabled
RSS 14 Disabled
RSS Expanded Stacked Disabled
RSS 14 Stacked Disabled
PDF417
Selection Enabled
Option Macro PDF417 Buffered Mode
Micro PDF417 Disabled
GRYPHON™ D432/D432E
20
Configuration Field Default Setting
Data Matrix
Selection Enabled - normal & inverted
Rectangular Style Enabled
Minimum Code Length 0001
Maximum Code Length 3600
QR
Selection Enabled
Postal Codes
Selection Disabled
Maxicode
Maxicode Mode 1 Disabled
Maxicode Mode 2 Disabled
Maxicode Mode 3 Disabled
Maxicode Mode 4 Disabled
Maxicode Mode 5 Disabled
Maxicode Mode 6 Disabled
Composite Codes
Selection Disabled
Discard Linear Part Enabled
Reading Parameters
Trigger Mode Trigger level
Trigger Type Normal trigger
Flash ON 2 sec
Flash OFF 2 sec
Beeper Tone Tone 1
Beeper Volume High volume
Beeper Duration 50 ms
Reads per Cycle One read per cycle
Scan Timeout 5 sec
Aiming System Delay Disabled
Good Read Spot Disabled
User Defined Beeper Tone Tone 1
User Defined Beeper Volume High Volume
User Defined Beeper Duration 100 ms
Codes per Scan One code per scan
Central Code Transmission Enabled
Order by Code Length Disabled
Order by Code Symbology Disabled
Autoscan Mode Disabled
Autoscan Aiming System Enabled
CONFIGURATION USING CODE SYMBOLS
21
Configuration Field Default Setting
Reading Parameters (continued)
Autoscan Hardware Trigger Enabled
Autoscan Illumination System Disabled
Stand Autoscan Mode Normal
Safety Time 500 ms (if Autoscan mode or Software
trigger type is selected and the Multiple
Reads per Cycle option is enabled.
Image Formatting
Image Preset 1, 2, 3, 4
Image Format JPEG format
Resolution Full (640x480)
Set JPEG Quality Factor 50
Window Origin (0,0)
Window Dimensions (640x480)
Brightness 0%
Contrast 0%
Zoom 100%
Color Depth 256 gray levels
GRYPHON™ D432/D432E
22
5.2 CHANGING DEFAULT SETTINGS
Once the reader is setup, you can change the default parameters to meet your
application needs. Refer to the preceding paragraphs for initial configuration in order
to set the default values and select the interface for your application.
In this manual, the configuration parameters are divided into logical groups making it
easy to find the desired function base on its reference group.
The RS232, USB, WEDGE groups are for Standard Interface parameter
configuration.
The following parameter groups are common to all interface applications:
• DATA FORMAT parameters regard the messages sent to the Host system.
• CAMERA CONTROL parameters regard the control mode managing the
camera.
• CODE SELECTION parameters allow configuration of a personalized mix of
codes, code families and their options.
• READING PARAMETERS control various operating modes and indicators
status functioning.
• CAPTURE IMAGE parameters activate image capturing.
• ADVANCED IMAGE CAPTURE parameters define options of the image to
capture.
• ADVANCED DATA FORMAT parameters allow advanced formatting of
messages towards the Host.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
RS232
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
23
RS232 INTERFACE
B
AUD
R
ATE
1200 baud 2400 baud
AODOBPHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEAEHIK
AKCBPJCJGIIJCMCFGKKJKOJDJK
AEFBJLBGMHPLMKBDIAOJAOCFGK
AAPHBAJJDEBGGOGPJMMKGENDBK
AGKFAMOCFGFEOEMPKONGEDGLJK
DDDLLLLDDLLLLLLDLDLDDLDLDL
AODOBPHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFFEFIK
AKCBPJCJGIIJCMCEHMOCCMGBNK
AEFBJLBGMHPKNKGHFCHBECLHGK
AAPHBAJICAFOGLINMDNLINCNFK
AFKFAPIBAPGEIJIHHJLGAGJLIK
DDDLLLLDDLLLLLLDDDLDDLDLDL
4800 baud 9600 baud
AODOBPHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALFBDEIK
AKCBPJCJGIIJCMCEGJKDEHBFLK
AEFBJLBGMHPLMOFOMLCDNGPGGK
AAPHBAJICAGAPEPJLLEPPMPNFK
AGLFAOPPDHDGCAJLOLBOAEPJJK
DDLLLLLDDLLLLLLDDDDDDLDLLL
AODOBPHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKEEDGIK
AKCBPJCJGIIJCMCFHPOIMFOHPK
AEFBJLBGMHPKNOCKBJLLJKGEGK
AAPHBAJJDECIPBBLOEFOBFADBK
AFLFANJMGOAGENNDDMHOEBAJIK
DDLLLLLDDLLLLLLDLDDDDLDLLL
14400 baud 19200 baud
AODOBPHMHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJAKECBFIK
AKCBPJCJGIIJCMCFGONEGKFJJK
AEFBJLBGMHPKNJFOOMMHDMNFGK
AAPHBAJJCHGPKILEAJBCHNGBHK
AELFAIIFKIDAOHJGJJACMIHIKK
DDLLLLLDDLLLLLLDDDDDDLDLLL
AODOBPHMHNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALFHBHIK
AKCBPJCJGIIJCMCEHIJPOIKLNK
AEFBJLBGMHPLMJCKDOFPHAEHGK
AAPHBAJIDDCHKNFGFGADJEJPDK
AHLFALOGPBAAIKNOEOGCINIILK
DDLLLLLDDLLLLLLDLDDDDLDLLL
38400 baud 57600 baud
AODOBPGMHNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJAKEGAGIK
AKCBPJCJGIIJCMCEHJMNMHBHNK
AEFBJLBGMHPLMJEFHPOOLLEGGK
AAPHBAJJDEELFPOLNABGHGBJBK
AHKFAPKHDDAKGGJMLDOCGOJIJK
DLLLLLLDLLDLLLLDDLDDDLDLLL
AODOBPGMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDAEIK
AKCBPJCJGIIJCMCFGPIGEFOFJK
AEFBJLBGMHPKNJDBKNHGPHNEGK
AAPHBAJICAADFKAJIPAHJPOHFK
AEKFAMMEGKDKALNEGEICCLGIIK
DLLLLLLDLLDLLLLDLLDDDLDLLL
115200 baud
AODOBPGMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFCHIK
AKCBPJCJGIIJCMCFHOLKOKFLPK
AEFBJLBGMHPKNOEFFIAKFBGFGK
AAPHBAJIDDEEADKGGCELPHIFDK
AFKFAJNNKMAMKBJBMBPOKCBJKK
DLLLLLLDLLDLLLLDDLDDDLDLLL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
RS232
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
24
P
ARITY
None Odd
AODOCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEHDEIK
AKCBPJCJGIIJCMCFHKNICLPJPK
AEFBJLBGMHPKMKCBGHIFAIHGGK
AAPHBAJICBECCPIFDALHLEPDBK
AHKFAKNLOFKOENMPPBAEMFGLKK
DLLLLLLDDDLLLLLDDLLDDLDLDL
AODOCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEBBHIK
AKCBPJCJGIIJCMCFGLOEIEEHJK
AEFBJLBGMHPKMNFFJCPJKOMHGK
AAPHBAJIDCAFHGCKNNPLNMJBHK
AGKFAPMCCDJIOHIKFEHIEMBKIK
DLLLLLLDDDLLLLLDLLLDDLDLDL
Even
AODOCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFEBFIK
AKCBPJCJGIIJCMCEHNKPAGLFNK
AEFBJLBGMHPLNNCBEAGBOCFFGK
AAPHBAJJCGENHDMIICOKDFGPDK
AFKFAMKBHKKIIKMCIDBIAJOKJK
DLLLLLLDDDLLLLLDDLLDDLDLDL
D
ATA
B
ITS
7 Bits 8 Bits
AODKGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFGHFIK
AKCBPJCJGIIJCMCEHMNLNAOLPK
AEFBJLBGMHPLNNCDILOHNKLGGK
AAPHBAJICBAGNCCMNKDBECODFK
AFKFAMPJFJLIGJIGMPLCONMJKK
DLLLLLLDDDDLLLLDDLLDDLDLLL
AODKGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFAFGIK
AKCBPJCJGIIJCMCEGNOHHPFFJK
AEFBJLBGMHPLNKFHHOJLHMAHGK
AAPHBAJIDCEBILIDDHHNCKIBDK
AEKFAJOAJPIOMDMDGKMOGELIIK
DLLLLLLDDDDLLLLDLLLDDLDLLL
S
TOP
B
ITS
1 Bit 2 Bits
AODKGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEDHFIK
AKCBPJCJGIIJCMCFGPJNAPDJLK
AEFBJLBGMHPLNPBLKBBJJBCEGK
AAPHBAJIDBEGBLCBDNBOCGFFDK
AEKFAMNDDBAAALDFGLGGCILLKK
DDLLLLLDLLDLLLLDLLDDDLDLLL
AODKGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEFFGIK
AKCBPJCJGIIJCMCFHOKBKAIHNK
AEFBJLBGMHPLNIGPFEGFDHJFGK
AAPHBAJICCABECIONAFCEODHFK
AFKFAJMKPHDGKBHAMOBKKBMKIK
DDLLLLLDLLDLLLLDDLDDDLDLLL
ACK/NACK
P
ROTOCOL
Disabled Enabled
AODKGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEBBHIK
AKCBPJCJGIIJCMCEGIPKHBNLJK
AEFBJLBGMHPLNPGMAAHBOHIFGK
AAPHBAJJDEDMBEFCELBBMOPPDK
AFLFAIPIECJKKHKLNFCCILOKJK
DDDLLLLDDLLLLLLDDDDDDLDLDL
AODKGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEHDEIK
AKCBPJCJGIIJCMCEHJMGNOGFPK
AEFBJLBGMHPLNIBIPFANEBDEGK
AAPHBAJJCHHLENPNKGFNKGJNFK
AELFANOBIEKMANOOHAFOACJLLK
DDDLLLLDDLLLLLLDLDDDDLDLDL
See par. 6.1.1 for details.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
RS232
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
25
RX
T
IMEOUT
RX Timeout
AODKBPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFFCFIK
AKCBPJCJGIIJCMCEGJNHKMOHPK
AEFBJLBGMHPLMOFHAGONLNCEGK
AAPHBAJJDFAAALCKIJIBHMDDFK
AFKFAMNLMCOCGLMJDCDIENPLKK
DLLLLLLDLLDLLLLDLDDDDLDLLL
Read a number in the range
00-99, where:
00 = disabled
01-99 = timeout from 1 to 99 secs
See par. 6.1.2 for details.
H
ANDSHAKE
None XON/XOFF
AODKGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFEBHIK
AKCBPJCJGIIJCMCFHLLMKOAJNK
AEFBJLBGMHPLNNFECKIPKMBHGK
AAPHBAJJCEHMNNFPKMDOKKEJFK
AELFAINCCKCCMFBIHBPGEOJIJK
DLDLLLLDLDLLLLLDLDLDDLDLDL
AODKGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFCDEIK
AKCBPJCJGIIJCMCFGKIAABLHLK
AEFBJLBGMHPLNKCANPPDAKKGGK
AAPHBAJJDHDLIEPAEBHCMCCLDK
AFLFANMLOMBEGPFNNEIKMHOJLK
DLDLLLLDLDLLLLLDDDLDDLDLDL
RTS/CTS
AODKGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEHDGIK
AKCBPJCJGIIJCMCEHMMLIDEFPK
AEFBJLBGMHPKMKFEANGLEGDEGK
AAPHBAJICDHDIBBCBOGDCLNFHK
AGLFAOKILFCEACBFADOKICBJKK
DLDLLLLDLDLLLLLDLDLDDLDLDL
FIFO
Disabled Enabled
AODKGKFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEHEEIK
AKCBPJCJGIIJCMCFHKPBPDILLK
AEFBJLBGMHPLMKFOFBKAHDNHGK
AAPHBAJJDDHLEHJBMCFNGJDNHK
AGKFAILCKNMOEJCKPGAMODCKIK
DLDLLLLDLLDLLLLDLDDDDLDLLL
AODKGKFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEBGHIK
AKCBPJCJGIIJCMCFGLMNFMDFNK
AEFBJLBGMHPLMNCKKENMNFGGGK
AAPHBAJJCADMBODOCPBBABFPBK
AHKFANKLGLPIODGPFDHAGKFLKK
DLDLLLLDLLDLLLLDDDDDDLDLLL
I
NTERCHARACTER
D
ELAY
Intercharacter Delay
AODKBPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEACFIK
AKCBPJCJGIIJCMCFHKJBHDDFLK
AEFBJLBGMHPLMMGPCMBDPGLGGK
AAPHBAJJCFEAMCCHGOKOBIIFDK
AEKFAMPBKKFKAJHKJGOMIIIJKK
DDLLLLLDDDDLLLLDDDLDDLDLLL
00
01-99
= disabled
= delay from 1 to 99 msec
I
NTERCODE
D
ELAY
Intercode Delay
AODKBPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFDHGIK
AKCBPJCJGIIJCMCFHLNMCOLHNK
AEFBJLBGMHPLNLGFFHDMCJHGGK
AAPHBAJJDCEHFIOJAAMNNLPBBK
AGLFAMJBCNLGIFEIBBBGCFDLLK
DDLLLLLDDLLLLLLDDDDDDLDLDL
00
01-99
= disabled
= delay from 1 to 99 sec
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
USB
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
26
USB
USB COM Emulation
H
ANDSHAKE
None XON/XOFF
AOALGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDBFIK
AKCBPJCJGIIJCMCEHONJKCAFPK
AEFBJLBGMHPKMMEGABIEOIJGGK
AAPHBAJICGEOOFKLJMHMGMPDFK
AGLFAJIKEDPOKPPMNLCCCFGIJK
DLLLLLLDDLDLLLLDDDLDDLDLLL
AOALGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFDGIK
AKCBPJCJGIIJCMCEGPOFANLLJK
AEFBJLBGMHPKMLDCPEPIEOCHGK
AAPHBAJIDFAJLMAEHBDAAEJBDK
AHLFAMJDIFMIAFLJHOFOKMBJLK
DLLLLLLDDLDLLLLDLDLDDLDLLL
RTS/CTS
AOALGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEADEIK
AKCBPJCJGIIJCMCFHJKOIPEJNK
AEFBJLBGMHPLNLEGCGGAACLFGK
AAPHBAJJCBEBLJOGCOCBONGPHK
AELFAPPANMPIGIPBKJDOOJOJKK
DLLLLLLDDLDLLLLDDDLDDLDLLL
A
CK
/N
ACK
P
ROTOCOL
Disabled Enabled
AOALGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEGBFIK
AKCBPJCJGIIJCMCFGNJPHNNHLK
AEFBJLBGMHPKMOHOCLHKKDAEGK
AAPHBAJIDGAOCMKGHLFDAIEFDK
AHLFAJKACLEGMNEPHPPGOABKJK
DDLLLLLDLDDLLLLDLDDDDLDLLL
AOALGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEADGIK
AKCBPJCJGIIJCMCFHMKDNCGJNK
AEFBJLBGMHPKMJAKNOAGAFLFGK
AAPHBAJICFEJHFAJJGBPGACHFK
AGLFAMLJONHAGHAKNKIKGJGLLK
DDLLLLLDLDDLLLLDDDDDDLDLLL
See par. 6.1.1 for details.
FIFO
Disabled Enabled
AOALGKFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEAEGIK
AKCBPJCJGIIJCMCEHPJEPPIHJK
AEFBJLBGMHPKNLEMHKKLDHFGGK
AAPHBAJIDBEJHPGFPCBPKPIHHK
AEKFAJOKMEBCCDMOFMNIIINKIK
DLLLLLLDDDLLLLLDDDDDDLDLDL
AOALGKFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGGFIK
AKCBPJCJGIIJCMCEGOKIFADJPK
AEFBJLBGMHPKNMDIIPNHJBOHGK
AAPHBAJICCAOCGMKBPFDMHOFBK
AFKFAMPDACCEIJILPJKEABKLKK
DLLLLLLDDDLLLLLDLDDDDLDLDL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
USB
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
27
I
NTERCHARACTER
D
ELAY
Intercharacter Delay
AOALBPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEHCHIK
AKCBPJCJGIIJCMCEHPPEHPDJJK
AEFBJLBGMHPKNNHNAHBILCDHGK
AAPHBAJICHHCPKNDFOOMNODPDK
AGKFANKJMDIGGDJODMDIODHJKK
DDDLLLLDLLLLLLLDLDLDDLDLDL
00
01-99
= disabled
= delay from 1 to 99 msec
I
NTERCODE
D
ELAY
Intercode Delay
AOALBPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFEHEIK
AKCBPJCJGIIJCMCEHOLJCCLLPK
AEFBJLBGMHPKMKHHHMDHGNPHGK
AAPHBAJIDAHFGABNDAIPBNELBK
AELFANMJEEGKOPKMLLMCEOMLLK
DDDLLLLDLDDLLLLDLDDDDLDLLL
00
01-99
= disabled
= delay from 1 to 99 sec
RX
T
IMEOUT
RX Timeout
AODKBPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFFCFIK
AKCBPJCJGIIJCMCEGJNHKMOHPK
AEFBJLBGMHPLMOFHAGONLNCEGK
AAPHBAJJDFAAALCKIJIBHMDDFK
AFKFAMNLMCOCGLMJDCDIENPLKK
DLLLLLLDLLDLLLLDLDDDDLDLLL
Read a number in the range
00-99, where:
00 = disabled
01-99 = timeout from 1 to 99 secs
See par. 6.1.2 for details.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
USB
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
28
USB Keyboard Emulation
FIFO
Disabled Enabled
AOAPGKFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECDEIK
AKCBPJCJGIIJCMCEHJJOKGPNLK
AEFBJLBGMHPLMPBJKCBJCCEFGK
AAPHBAJICBGIEIKMBJAMEMFDFK
AHLFAJLKDIKCEOHGFFIACHKIKK
DDDLLDLDDDLLLLLDLDDDDLDLLL
AOAPGKFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEEBHIK
AKCBPJCJGIIJCMCEGIKCAJEDNK
AEFBJLBGMHPLMIGNFHGFIEPEGK
AAPHBAJIDCCPBBADPEEACEDBDK
AGLFAMKDPOJEOEDDPAPMKONJIK
DDDLLDLDDDLLLLLDDDDDDLDLLL
I
NTERCHARACTER
D
ELAY
Intercharacter Delay
AOAPFLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFEFHIK
AKCBPJCJGIIJCMCEGIKGHBCJPK
AEFBJLBGMHPLNMFDFAKDEDMEGK
AAPHBAJJDGEIPKFLPHCACJDHFK
AGKFAIMDALNGCKCMNJLKKPPKLK
DLLLLDLDDLLLLLLDDLLDDLDLLL
00
01-99
= disabled
= delay from 1 to 99 msec
I
NTERCODE
D
ELAY
Intercode Delay
AOAPFLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEBFHIK
AKCBPJCJGIIJCMCFHLOAKOPLLK
AEFBJLBGMHPLNOGLHKFNAIFGGK
AAPHBAJJCGAIDDFGBAAPENIBDK
AHKFAIOJGDGOEIJPHNGOGKIILK
DDLLLDLDLDLLLLLDLLDDDLDLLL
00
01-99
= disabled
= delay from 1 to 99 sec
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
USB
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
29
K
EYBOARD
N
ATIONALITY
This parameter default value is restored through the Interface Selection code and not Restore
Default.
Belgian English
AOAPCOGMHNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJAKFFAHIK
AKCBPJCJGIIJCMCEHIJFLFPNPK
AEFBJLBGMHPLMLHCHGLKEBCFGK
AAPHBAJJDECOEEAFHDAPIFOFDK
AHLFAKJGEAHOKMOLCCDMAIBLKK
DDLLLDLDLDLLLLLDDDLDDLDLLL
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKFHDHIK
AKCBPJCJGIIJCMCFHOLALHANNK
AEFBJLBGMHPKNMBNBAOPGAAHGK
AAPHBAJJDEENOKPFEHEHOGPPDK
AFKFAIKNBNHCIHKEKNKACHIKLK
DLLLLDLDDDDLLLLDLLLDDLDLLL
French German
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEGEEIK
AKCBPJCJGIIJCMCEHNLKFOILPK
AEFBJLBGMHPKNIFAFLCFLINEGK
AAPHBAJICADLHAGDGAMCHONBHK
AFLFAKLAHMBAEDPAOIGIGABILK
DLDLLDLDDDDLLLLDDLDDDLDLDL
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALECDFIK
AKCBPJCJGIIJCMCEGIPLDFPPJK
AEFBJLBGMHPLMMGJMCHHCMJFGK
AAPHBAJICAAFOPBHBIFGAPABHK
AGKFALMOEEECOKOMHKMAGCHKKK
DLLLLDLDDDDLLLLDDLLDDLDLLL
Italian Japanese
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFDEGIK
AKCBPJCJGIIJCMCFGLPBNMHJLK
AEFBJLBGMHPLMICEIJLNPEEGGK
AAPHBAJJDEHDHFIBDPNDJHCPDK
AGLFAJNDCFCACOLIDPAICFOIKK
DLDLLDLDDDDLLLLDLLDDDLDLDL
AOAPCOGMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEAAFIK
AKCBPJCJGIIJCMCFGONODHAPLK
AEFBJLBGMHPKNLAGKECCANLHGK
AAPHBAJICAGGEBOHCMBOGMBLHK
AELFAJPFBJEOMBKDPFFMENOLLK
DDLLLDLDLDLLLLLDLDLDDLDLLL
Spanish Swedish
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEEBGIK
AKCBPJCJGIIJCMCEHJMHJKEBPK
AEFBJLBGMHPLMLBNDHALIKCEGK
AAPHBAJIDDECLGLIPFBKGHGDBK
AHKFAONHICHEEAKJNPLMOLALIK
DLLLLDLDDDDLLLLDLLLDDLDLLL
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJAKFBBEIK
AKCBPJCJGIIJCMCFGPIMBILDLK
AEFBJLBGMHPKNLGJOFJDMGLGGK
AAPHBAJJCHAKLDFKKKALIOJNFK
AEKFANLENLEECNOBAINMKOPLJK
DLLLLDLDDDDLLLLDDLLDDLDLLL
USA
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFFGFIK
AKCBPJCJGIIJCMCFHKMNHDMHNK
AEFBJLBGMHPLMPFAHMMBFCPHGK
AAPHBAJJCHDECMCONCJPPPENFK
AHLFAMMKODBGIEPNJKHEKMJJIK
DLDLLDLDDDDLLLLDDLDDDLDLDL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
USB
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
30
K
EYBOARD
S
PEED
This parameter default value is restored through the Interface Selection code and not Restore
Default.
Normal Fast
AOAPBPGMFNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEBGHIK
AKCBPJCJGIIJCMCEGJIEPKNDJK
AEFBJLBGMHPLNNDGIDBCOOAEGK
AAPHBAJJDEHOFMOFDGMGKIAJFK
AFLFAJNANAPEGCNKPFNGOKFKLK
DDDLLDLDLDDLLLLDLDLDDLDLLL
AOAPBPHMFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFAHGIK
AKCBPJCJGIIJCMCEGINGNFGPJK
AEFBJLBGMHPLNNFJMCKDCFAFGK
AAPHBAJIDDBCKOFILANDEKIPHK
AFKFANJBBCPOIOJIAIFGAJEKJK
DLDLLDLDDDLLLLLDDLLDDLDLLL
See par. 6.2.1 for details.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
WEDGE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
31
WEDGE INTERFACE
C
APS
L
OCK
Caps Lock Off Caps Lock On
AOCOCOFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEEHFIK
AKCBPJCJGIIJCMCFHPJMFONJPK
AEFBJLBGMHPKMPEAEFKPFEBEGK
AAPHBAJJDDHLCANDMPHCNCFDHK
AFLFALKFFFDCEGMMLKJKOLEKJK
DDLLLLLDLLDLLLLDLDLDDLDLDL
AOCOCOFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECFGIK
AKCBPJCJGIIJCMCFGOKAPBGHJK
AEFBJLBGMHPKMIDELANDPCKFGK
AAPHBAJJCADMHJHMCCDOLKDBBK
AELFAOLMJDAEOMIJBPOGGCDLLK
DDLLLLLDLLDLLLLDDDLDDLDLDL
C
APS
L
OCK
A
UTO
-R
ECOGNITION
Disabled Enabled
AOCKGOFOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEHHGIK
AKCBPJCJGIIJCMCFGMIHHEGDPK
AEFBJLBGMHPKMNCOEGANBCAEGK
AAPHBAJICGHHLLJCDOLBAPHHBK
AGKFANMKJEKEKLMFDFKAEEPJIK
DLDLLLLDDDDLLLLDDLDDDLDLDL
AOCKGOFOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEBFFIK
AKCBPJCJGIIJCMCFHNLLNLNNJK
AEFBJLBGMHPKMKFKLDHBLELFGK
AAPHBAJIDFDAOCDNNDPNGHBFHK
AHKFAINDFCJCABIAJANMMNIIKK
DLDLLLLDDDDLLLLDLLDDDLDLDL
Note: Caps lock manual configuration is ignored when Caps Lock Auto-Recognition is enabled
N
UM
L
OCK
Num Lock Off Num Lock On
AOCOCOFOFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFBHFIK
AKCBPJCJGIIJCMCEGMNKIBALLK
AEFBJLBGMHPKMNHIGPFBBPIGGK
AAPHBAJJCDDLOJNOCIFNLGOFBK
AELFALIPDNIKCEHPBOEOCODIJK
DLLLLLLDDDDLLLLDDDDDDLDLDL
AOCOCOFOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFHFGIK
AKCBPJCJGIIJCMCEHNOGCOLFNK
AEFBJLBGMHPKMKAMJKCNLJDHGK
AAPHBAJJDAHMLAHBMFBBNOIHHK
AFLFAOJGPLLMIODKLLDCKHEJLK
DLLLLLLDDDDLLLLDLDDDDLDLDL
I
NTERCHARACTER
D
ELAY
Intercharacter Delay
AOCKFPFODNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALECEGIK
AKCBPJCJGIIJCMCFHMPCPODFNK
AEFBJLBGMHPKMJGOMPJIKMEFGK
AAPHBAJJCGFAJDKLLOPOKJGHDK
AFKFAMNDCADMEDKNDOGAGBBJIK
DDLLLLLDDDLLLLLDLDDDDLDLLL
00
01-99
= disabled
= delay from 1 to 99 msec
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
WEDGE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
32
I
NTERCODE
D
ELAY
Intercode Delay
AOCKFPHMDNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFBBFIK
AKCBPJCJGIIJCMCFHNLPKDLHLK
AEFBJLBGMHPKNOGELELHHDIFGK
AAPHBAJJDBFHAJGFNAJNGKBDBK
AHLFAMLDKHNAMPJPLJJKMMKLJK
DDLLLLLDDLDLLLLDLDLDDLDLDL
00
01-99
= disabled
= delay from 1 to 99 sec
K
EYBOARD
N
ATIONALITY
This parameter default value is restored through the Interface Selection code and not Restore
Default.
Belgian English
AOCOCOGMHNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJAKFHEEIK
AKCBPJCJGIIJCMCEHMIJMFGBLK
AEFBJLBGMHPKNMGIDEPLJIAGGK
AAPHBAJJDHGGNCDGAAIBGLIPDK
AHKFANJJHBLGOCOIIFCIOCHKKK
DLDLLLLDDDDLLLLDLLLDDLDLDL
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKFFHEIK
AKCBPJCJGIIJCMCFHKKMMHJBJK
AEFBJLBGMHPLMLAHFCKOLJCEGK
AAPHBAJJDHAFHMMGDEMJAIJFDK
AFLFAPKCCMLKMJKHAKLEMNOLLK
DDDLLLLDLDLLLLLDDDLDDLDLDL
French German
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEEAHIK
AKCBPJCJGIIJCMCEHJKGCOBHLK
AEFBJLBGMHPLMPEKBJGEGBPHGK
AAPHBAJICDHDOGFABDEMJALLHK
AFKFANLPENNIANPDEPHMIKHJLK
DDLLLLLDLDLLLLLDLDDDDLDLLL
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEAHGIK
AKCBPJCJGIIJCMCEGMOHEFGDNK
AEFBJLBGMHPKNLHDIADGPFLGGK
AAPHBAJICDENHJCEGLNIOBGLHK
AGLFAMMBHFIKKEOPNNNEIIBLKK
DDDLLLLDLDLLLLLDLDLDDLDLDL
Italian Japanese
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBAFIK
AKCBPJCJGIIJCMCFGPONKMOFPK
AEFBJLBGMHPKNPDOMLPMCNGFGK
AAPHBAJJDHDLODLCEMFNHJEFDK
AGKFAONMBEOIGALLJIBMMPIJKK
DDLLLLLDLDLLLLLDDDDDDLDLLL
AOCOCOGMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECEGIK
AKCBPJCJGIIJCMCFGKMCEHJDPK
AEFBJLBGMHPLMMBMOGGDNEJEGK
AAPHBAJICDCONHNEFPJAICHBHK
AEKFAOPKCIIGIPKAFCEIKHIKLK
DLDLLLLDDDDLLLLDDLLDDLDLDL
Spanish Swedish
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEGFFIK
AKCBPJCJGIIJCMCEHNNLOKNNLK
AEFBJLBGMHPKNMAHHFEKFDAHGK
AAPHBAJIDAAKCAILIGJEIJAJBK
AHLFAJNILDLMAOKKHIKIABGKIK
DDDLLLLDLDLLLLLDDDLDDLDLDL
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJAKFDFHIK
AKCBPJCJGIIJCMCFGLJAGICPPK
AEFBJLBGMHPLMMHDKHNCBPJFGK
AAPHBAJJCEECCFGJNJIFGAPHFK
AELFAKLLOKIMGDOCKPMIEEJKJK
DDDLLLLDLDLLLLLDLDLDDLDLDL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
WEDGE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
33
USA
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHCGIK
AKCBPJCJGIIJCMCFHONBADFLJK
AEFBJLBGMHPKNIEKDOIAILNEGK
AAPHBAJJCEHMLKBNKBBBBBCHFK
AHKFALMFNCNOMKPODNGAEGPIIK
DDLLLLLDLDLLLLLDLDDDDLDLLL
K
EYBOARD
S
ETTING
The values set by this procedure are not effected by the Restore Default code but will
be lost if the Interface Selection code is read.
Set Alphanumeric Keys
AOCOBLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFHEIK
AKCBPJCJGIIJCMCFHKIFCIDNNK
AEFBJLBGMHPKNOEFDMIDAIKGGK
AAPHBAJJDBGBFEFKLAHODLCLBK
AELFAONNHNGEOMLLCMDAAFDLLK
DDLLLLLDLLLLLLLDDDLDDLDLLL
The reader can be used with terminals or PCs with various keyboard types and
nationalities through a simple keyboard setting procedure.
Keyboard setting consists of communicating to the reader how to send data
corresponding to the keyboard used in the application. The keys must be set in a
specific order.
Press and release a key to set it.
Some characters may require more than one key pressed simultaneously during
normal use (refer to the manual of your PC or terminal for keyboard use). The exact
sequence must be indicated to the reader in this case pressing and releasing the
different keys.
Example:
If one has to press the "Shift" and "4" keys simultaneously on the keyboard to
transmit the character "$" to the video, to set the "$", press and release "Shift" then
press and release "4".
Each pressed and released key must generate an acoustic signal on the reader,
otherwise repress the key. Never press more than one key at the same time, even if
this corresponds to the normal use of your keyboard.
Press "Backspace" to correct a wrong key entry. In this case the reader emits a
wrong beep.
Note: "CAPS LOCK" and "NUM LOCK" must be off before starting the keyboard
setting procedure. "SHIFT" must be repressed for each character and cannot
be substituted by "CAPS LOCK".
1. Read the "Set Alphanumeric Keys" code.
2. Press the keys shown in the following table according to their numerical order:
WEDGE
34
Some ASCII characters may be missing as this depends on the type of keyboard:
these are generally particular characters relative to the various national symbologies.
In this case:
• The first 4 characters (Shift, Alt, Ctrl, and Backspace) can only be
substituted with keys not used, or substituted with each other.
• Characters can be substituted with other single symbols (e.g. "SPACE") even if
not included in the barcode set used.
• Characters can be substituted with others corresponding to your keyboard.
The reader signals the end of the procedure with 3 beeps indicating the keys
have been registered.
01 : Shift
02 : Alt
03 : Ctrl
04 : Backspace
05 : SPACE 28 : 7 51 : N
06 : ! 29 : 8 52 : O
07 : " 30 : 9 53 : P
08 : # 31 : : 54 : Q
09 : $ 32 : ; 55 : R
10 : % 33 : < 56 : S
11 : & 34 : = 57 : T
12 : ' 35 : > 58 : U
13 : ( 36 : ? 59 : V
14 : ) 37 : @ 60 : W
15 : * 38 : A 61 : X
16 : + 39 : B 62 : Y
17 : , 40 : C 63 : Z
18 : - 41 : D 64 : [
19 : . 42 : E 65 : \
20 : / 43 : F 66 : ]
21 : 0 44 : G 67 : ^
22 : 1 45 : H 68 : _ (underscore)
23 : 2 46 : I 69 : `
24 : 3 47 : J 70 : {
25 : 4 48 : K 71 : |
26 : 5 49 : L 72 : }
27 : 6 50 : M 73 : ~
74 : DEL
WEDGE
35
Acoustic Signals
Four types of acoustic signals are associated with the following steps:
1. Enter keyboard setup
2. Exit keyboard setup
3. SHIFT, ALT, CTRL, BACKSPACE keys
4. Keyboard keys (SHIFT, ALT, CTRL, BACKSPACE excluded)
These signals facilitate the selection of those characters requiring more than one key
pressed simultaneously.
Example
The transmission of the "%" character implies two different steps:
1. Press the SHIFT key
2. Press the "5" key
The different tones produced by the reader indicate that both steps have been
successful and that the character has been transmitted.
WEDGE
36
E
XTENDED
H
EADER
/T
ERMINATOR
K
EYS
For the WEDGE interface, the following extended keyboard values can also be
configured:
These values are restored through the Interface Selection code and not Restore
Default.
EXTENDED KEYBOARD TO HEX CONVERSION
IBM AT
HEX KEY
83 ENTER
84 TAB
85 F1
86 F2
87 F3
88 F4
89 F5
8A F6
8B F7
8C F8
8D F9
8E F10
8F F11
90 F12
91 HOME
92 END
93 PG UP
94 PG DOWN
95 ↑
96 ↓
97 ←
98 →
99 ESC
9A CTRL (Right)
9B Euro
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
WEDGE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
37
S
ET
C
USTOM
E
XTENDED
H
EADER
/T
ERMINATOR
K
EYS
Set Extended Keys
AOCOBLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFAHEIK
AKCBPJCJGIIJCMCEGJMDPHOPJK
AEFBJLBGMHPKNMHNBGHNEDDEGK
AAPHBAJJCBCBJNFHFHFBFPJNHK
AFLFAOPHBFNMIOAIIIOEMAEJLK
DLLLLLLDDDLLLLLDLDDDDLDLLL
The extended Header/Terminator keys for Wedge Interface users can be
customized by defining them through a simple keyboard setting procedure.
For example, the Numeric Keypad keys can be set for use as Headers or
Terminators by substituting the default extended keys during this procedure.
Press and release a key to set it.
Some characters may require more than one key pressed simultaneously during
normal use (refer to the manual of your PC or terminal for keyboard use). The exact
sequence must be indicated to the reader in this case pressing and releasing the
different keys.
Example:
If one has to press the "Shift" and "4" keys simultaneously on the keyboard to
transmit the character "$" to the video, to set the "$", press and release "Shift" then
press and release "4".
Each pressed and released key must generate an acoustic signal on the reader,
otherwise repress the key. Never press more than one key at the same time, even if
this corresponds to the normal use of your keyboard.
Press "Backspace" to correct a wrong key entry. In this case the reader emits a
wrong beep.
Note: "CAPS LOCK" and "NUM LOCK" must be off before starting the keyboard
setting procedure. "SHIFT" must be repressed for each character and cannot
be substituted by "CAPS LOCK".
1. Read the "Set Extended Keys" code.
2. Press the first 4 keys indicated in the following table.
3. Define all keys from 5 to 28 in the following table.
WEDGE
38
If the first 4 KEYS (Shift, Alt, Ctrl, and Backspace) are not available on your
keyboard, you can only substitute them with keys not used, or substitute them
with each other.
The reader signals the end of the procedure with 3 beeps indicating the keys
have been registered.
CUSTOM EXTENDED KEYBOARD SETTING TABLE
Custom
Order HEX KEY
01 - Shift
02 - Alt
03 - Ctrl
04 - Backspace
05 83
06 84
07 85
08 86
09 87
10 88
11 89
12 8A
13 8B
14 8C
15 8D
16 8E
17 8F
18 90
19 91
20 92
21 93
22 94
23 95
24 96
25 97
26 98
27 99
28 9A
WEDGE
39
Acoustic Signals
Four types of acoustic signals are associated with the following steps:
1. Enter keyboard setup
2. Exit keyboard setup
3. SHIFT, ALT, CTRL, BACKSPACE keys
4. Keyboard keys (SHIFT, ALT, CTRL, BACKSPACE excluded)
These signals facilitate the selection of those characters requiring more than one key
pressed simultaneously.
Example
The transmission of the "%" character implies two different steps:
1. Press the SHIFT key
2. Press the "5" key
The different tones produced by the reader indicate that both steps have been
successful and that the character has been transmitted.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
DATA FORMAT
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
40
DATA FORMAT
The Data Format parameters can be restored to their default values using the
following methods:
1) the general “Restore Default” code restores all the configuration parameter
groups including Data Format to their default values, with the exception of the
Symbology Independent Header and Terminator selections;
2) the “Data Format Default” code restores all the Data Format configuration
parameters to their default values, with the exception of the Symbology
Independent Header and Terminator selections;
3) the Symbology Independent Header and Terminator parameters are set to their
default values when reading the interface selection code;
4) the “Symbology Specific Format Default” code restores only the configuration
parameters of the specific symbology indicated by the Code Identifier code in
Appendix C.
D
ATA
F
ORMAT
D
EFAULT
Data Format Default
AOCPBLDKFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEGAFIK
AKCBPJCJGIIJCMCEHJKCFFCHPK
AEFBJLBGMHPKMNAJGLEGHEGGGK
AAPHBAJJCHEKKKMBGNHELADBDK
AEKFAPJMLGFOAIOEJLKOMMCJLK
DDDLDDLLLLLLLLLDDDLDDLDLDL
Symbology Independent Parameters
C
ODE
I
DENTIFIER
Disabled Custom Code ID
AOCPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFAFIK
AKCBPJCJGIIJCMCFGNOPBGHPJK
AEFBJLBGMHPKNIGPNAEBNHLEGK
AAPHBAJICGHAMCNFBEFLHEFBDK
AHLFAOKCHHDGGGHMMLMEENPIKK
DLDLLLLDDLLLLLLDDLDDDLDLLL
AOCPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDCGIK
AKCBPJCJGIIJCMCFHMNDLJMBPK
AEFBJLBGMHPKNPBLCFDNHBAFGK
AAPHBAJIDFDHJLHKPJBHBMDDFK
AGLFALLLLBAAMMDJGOLIMEIJIK
DLDLLLLDDLLLLLLDLLDDDLDLLL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
DATA FORMAT
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
41
AIM Standard Code ID
AOCPCOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEGCEIK
AKCBPJCJGIIJCMCEGKJIDLDDLK
AEFBJLBGMHPLMPGPPHKFDNJHGK
AAPHBAJJCBHPJOJIKGAGPFMNBK
AFLFAINIOIDAKBHBLJNIIBHJJK
DLDLLLLDDLLLLLLDDLDDDLDLLL
C
USTOM
C
ODE
I
DENTIFIER
Custom Code Identifier
AOCPBLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEHFHIK
AKCBPJCJGIIJCMCFGJLLDNBJNK
AEFBJLBGMHPKNOGANCECFEMGGK
AAPHBAJIDDGNCMJCAFDEFOFNHK
AEKFALLKNIIMEADJNKJEAODLJK
DLDLLLLDDDLLLLLDLLLDDLDLLL
1. Select a Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. Set the number of characters in the
range 0-3, where 0 = Code ID
disabled.
3. Read the corresponding characters as
Hex values from the Hex/Numeric
table. Valid values are in the range
00-7F.
C
ODE
L
ENGTH
Disabled Enabled
AOCLGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEGCGIK
AKCBPJCJGIIJCMCFGMILJDIPLK
AEFBJLBGMHPLMPBKJNELHDNFGK
AAPHBAJJCDEODAAPIINCGKOLHK
AEKFAMKLLILKOOKLELDGMGALJK
DLLLLLLDLLLLLLLDLDDDDLDLLL
AOCLGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEAAFIK
AKCBPJCJGIIJCMCFHNLHDMDBNK
AEFBJLBGMHPLMIGOGIDHNFGEGK
AAPHBAJJDAAJGJKAGFJOACIJBK
AFKFAJLCHOIMEEOOOOEKEPHKLK
DLLLLLLDLLLLLLLDDDDDDLDLLL
S
ET
H
EADERS
Set Headers
AOCLFLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFEHEIK
AKCBPJCJGIIJCMCFGINPLIOJPK
AEFBJLBGMHPLMJBFJPEIPAKHGK
AAPHBAJJDGFDNOEIJJLNEAOHDK
AHLFAJLDBHAAMIOOFKGGIFMIKK
DLLLLLLDLDLLLLLDDDLDDLDLLL
1. Set the number of characters
in the range 00-10.
2. Read the corresponding
characters as Hex values from
the Hex/Numeric table. Valid
values are in the range:
00-7F for RS232, USB BULK,
USB COM, USB Generic HID
00-9B for Wedge and USB
Keyboard
3. Read the following code to
enable the configuration you
have set.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
DATA FORMAT
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
42
H
EADERS
Disabled Enabled
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBEEIK
AKCBPJCJGIIJCMCFHIKKDCLPNK
AEFBJLBGMHPLMNFFBGNNEOOGGK
AAPHBAJIDGHEPGHBBJPCOGPHBK
AELFAIKKKDJICAIGFBKGKACIKK
DDDLLLLDLDDLLLLDLLLDDLDLDL
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHGHIK
AKCBPJCJGIIJCMCFGJJGJNABLK
AEFBJLBGMHPLMKCBODKBOIFHGK
AAPHBAJICFDDKPNOPELOIOJFHK
AFLFANLDGFKOIKMDPENKCJFJIK
DDDLLLLDLDDLLLLDDLLDDLDLDL
S
ET
T
ERMINATORS
Set Terminators
AOCLBPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFAHGIK
AKCBPJCJGIIJCMCEGKMBDAFBPK
AEFBJLBGMHPLNOFGDKLPFPNFGK
AAPHBAJICHAICAAEDMENDAINBK
AFKFAMKDELFIIOFHBCGIKDELJK
DDLLLLLDLLLLLLLDLLDDDLDLLL
1. Set the number of characters
in the range 00-10.
2. Read the corresponding
characters as Hex values from
the Hex/Numeric table. Valid
values are in the range:
00-7F for RS232, USB BULK,
USB COM, USB Generic HID
00-9B for Wedge and USB
Keyboard
3. Read the following code to
enable the configuration you
have set.
T
ERMINATORS
Disabled Enabled
AOCLCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFEGIK
AKCBPJCJGIIJCMCEHKLELKAHNK
AEFBJLBGMHPLNKBGLDCKOBJEGK
AAPHBAJJCHCPAIDNLMACJGJNDK
AGKFANLKPPMAGGDPBJKIIGKLJK
DLDLLLLDLLDLLLLDDDDDDLDLDL
AOCLCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDGFIK
AKCBPJCJGIIJCMCEGLIIBFLJLK
AEFBJLBGMHPLNNGCEGFGEHCFGK
AAPHBAJJDEGIFBJCFBEOPOPPFK
AHKFAIKDDJPGMMHKLMNEAPNKLK
DLDLLLLDLLDLLLLDLDDDDLDLDL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
DATA FORMAT
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
43
Symbology Dependent Parameters
The “Symbology Specific Format Default” code on page 46 allows restoring the
symbology dependent parameters related to a specific code family to the default
values.
S
YMBOLOGY
S
PECIFIC
F
ORMAT
Symbology Specific Format
AOCLCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEGHGIK
AKCBPJCJGIIJCMCFHLNMJCGPLK
AEFBJLBGMHPLMMGPEPDOAPMGGK
AAPHBAJJDCFMDNCMBONAPKCNHK
AGKFALICLLGKIBEJGFOCKENJLK
DLLLLLDLLLDLLLLDDLDDDLDLLL
1. Select a Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. Formatting:
0 = select all - Stop
1 = select right - followed by Step 3
2
= select left - followed by Step 3
3
= select middle - followed by a
number in the range 000-999
for the starting character and
then, by Step 3
4
= discard right - followed by Step 3
5
= discard left - followed by Step 3
6
= discard middle - followed by a
number in the range 000-999
for the starting character and
then, by Step 3
3. Set the number of characters to
select/discard in the range 000-999.
S
YMBOLOGY
H
EADERS
Symbology Headers
AOCPFPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFEGEIK
AKCBPJCJGIIJCMCEGJLCJPHBPK
AEFBJLBGMHPKNNDHOGJCJDBFGK
AAPHBAJICDAIOGPCAEKBELJJBK
AFLFANMIJICKAJMIONHKIJOLLK
DDLLLDLDDDDLLLLDDLLDDLDLLL
1. Select a Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. Set the number of characters in the
range 0-5.
3. Read the corresponding characters as
Hex values from the Hex/Numeric
table. Valid values are in the range:
00-7F for RS232, USB BULK, USB COM,
USB Generic HID
00-9B for Wedge and USB Keyboard
4. Read the following code to enable the
configuration you have set.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
DATA FORMAT
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
44
H
EADERS
Headers
AOCPFPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEBGEIK
AKCBPJCJGIIJCMCFHKPEEAKDLK
AEFBJLBGMHPKNPAPMMGMNIIHGK
AAPHBAJIDDEICPPPODIOCPCPHK
AELFANOCPAJCGLHLEJKOEMJJLK
DLLLLDLDLLDLLLLDLLDDDLDLLL
1. Select a Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. 0 = disabled
1 = enabled
S
YMBOLOGY
T
ERMINATORS
Symbology Terminators
AOCPFLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFGAGIK
AKCBPJCJGIIJCMCFGONFOBJDNK
AEFBJLBGMHPKNNEAEHPKOFLEGK
AAPHBAJJCGHCOJIBHCKOKDDDBK
AEKFAJODOLLAKFFGFDDOCKLKIK
DDDLLDLDLDLLLLLDLDLDDLDLDL
1. Select a Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. Set the number of characters in the
range 0-5.
3. Read the corresponding characters as
Hex values from the Hex/Numeric
table. Valid values are in the range:
00-7F for RS232, USB BULK, USB COM,
USB Generic HID
00-9B for Wedge and USB Keyboard
4. Read the following code to enable the
configuration you have set.
T
ERMINATORS
Terminators
AOCPFLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEDAGIK
AKCBPJCJGIIJCMCEHNJDDOEBJK
AEFBJLBGMHPKNPHIGNAEKOCGGK
AAPHBAJJDGDCCAIMJFIBMHIFHK
AFKFAJMJIDAIMHOFPHOKOPMIIK
DLDLLDLDDLLLLLLDDDDDDLDLDL
1. Select a Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. 0 = disabled
1 = enabled
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
DATA FORMAT
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
45
S
YMBOLOGY
C
HARACTER
S
UBSTITUTION
Symbology Character
Substitution
AOCPBLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFAGGIK
AKCBPJCJGIIJCMCFGLKMBHMJPK
AEFBJLBGMHPKMKHEEDGFDMGHGK
AAPHBAJJDCFDBILOKBFBDLPDDK
AHKFAINIMEHCEPHBKFHEKPGIIK
DLLLLDLDDLDLLLLDLDDDDLDLLL
1. Select a Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. Read the corresponding character
as Hex value from the Hex/Numeric
table which identifies the character
to be substituted. Valid value is in
the range 00-7F.
3. Read the corresponding character
as Hex value from the Hex/Numeric
table which identifies the new
substituting character. Valid value is
in the range 00-7F.
4. Read the following code to enable
the configuration you have set.
C
HARACTER
S
UBSTITUTION
Character Substitution
AOCPBLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFGGIK
AKCBPJCJGIIJCMCEHIOKMIBLLK
AEFBJLBGMHPKMIEMGJJLHHPFGK
AAPHBAJJCCBDNBLDEGHOFPEFFK
AGKFAIPCKMMKCNMCABKAGKBKIK
DDLLLDLDLDDLLLLDDDLDDLDLLL
1. Select a Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. 0 = disabled
1 = enabled
S
YMBOLOGY
C
HARACTER
D
ELETION
Symbology Character Deletion
AOCLFPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEBCHIK
AKCBPJCJGIIJCMCEGNKPOMNLPK
AEFBJLBGMHPLNNHGKPAHOOKHGK
AAPHBAJJDCBHOFBHELNHMNODHK
AFKFAOPKHIGEGLDIJLMCIHMKIK
DLLLLDLDDLLLLLLDLDDDDLDLDL
1. Select a Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. Read the corresponding character as
Hex value from the Hex/Numeric table
which identifies the character to be
deleted.
Valid value is in the range 00-7F.
3. Read the following code to enable the
configuration you have set.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
DATA FORMAT
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
46
C
HARACTER
D
ELETION
Character Deletion
AOCLFPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFECHIK
AKCBPJCJGIIJCMCFHOOJDDAJLK
AEFBJLBGMHPLNPEOIFPJKFDFGK
AAPHBAJJCCFHCMBKKMPIKJFFBK
AEKFAONABANMAJILDPBGECLIIK
DDLLLDLDLDLLLLLDDDLDDLDLDL
1. Select a Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. 0 = disabled
1 = enabled
S
YMBOLOGY
S
PECIFIC
F
ORMAT
D
EFAULT
Symbology Specific Format
Default
AOCPBLDIHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFAAEIK
AKCBPJCJGIIJCMCEHOIKHBLJNK
AEFBJLBGMHPKMMHNPMDEIGJGGK
AAPHBAJICDAGPDAKALKOINIBHK
AFKFANJCEPAAEBCDGCFGONPKKK
DLDLDDLLDDDLLLLDDLLDDLDLLL
Select a Datalogic Standard Code Identifier
from the Code Identifier Table in
Appendix C.
Concatenation
D
EFINE
C
ONCATENATION
Define Concatenation
AOCLBLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFACFIK
AKCBPJCJGIIJCMCEHMPHLLLBLK
AEFBJLBGMHPLMIANCAAOAKEHGK
AAPHBAJIDDAMNCFGAJAINJDPDK
AGLFALMAEMIEEPDCHHBIGEDLLK
DLLLLDLDLLLLLLLDLLDDDLDLDL
1. Select the number of codes to
concatenate in the range 2-4.
2. Select the Datalogic Standard Code
Identifier for each code to concatenate
(repeat for same code types) from the
table in Appendix C.
3. Read the following Code to enable the
configuration you have set.
C
ONCATENATION
E
NABLE
/D
ISABLE
Disabled Enabled
AOCLCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFBFIK
AKCBPJCJGIIJCMCEGMICDBOHJK
AEFBJLBGMHPLMMENKJJLLEAGGK
AAPHBAJJDDCLPKGPIJEHHPCPBK
AFLFAKNJPIBMKHFKHMNIEBNLLK
DDDLLDLDLLDLLLLDDDDDDLDLLL
AOCLCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDDGIK
AKCBPJCJGIIJCMCEHNLOJOFJPK
AEFBJLBGMHPLMLDJFMOHBCLHGK
AAPHBAJJCAGMKDMAGEALBHENHK
AELFAPMADOCKANBPNJKEMIKKJK
DDDLLDLDLLDLLLLDLDDDDLDLLL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
DATA FORMAT
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
47
Concatenation Options
F
IRST
C
ONCATENATED
C
ODE
L
ENGTH
Set First Concatenated Code
Length
AOCLCKHOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEABHIK
AKCBPJCJGIIJCMCFHLKPMKFPLK
AEFBJLBGMHPKNNGOKPMDEJKEGK
AAPHBAJICEFCFKJNIILEINNFHK
AELFAJICKBNGEDLFILEAAIELKK
DLDLLDLDLDLLLLLDDLDDDLDLDL
Read the number in the range
000-255.
000 = any code length
S
ECOND
C
ONCATENATED
C
ODE
L
ENGTH
Set Second Concatenated Code
Length
AOCLCKHOBNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFFBFIK
AKCBPJCJGIIJCMCEGNOEEIKNPK
AEFBJLBGMHPLMNBKHNFLAFDGGK
AAPHBAJJDABKFPHPNHKFGECLDK
AHLFAKOBPIOGCOPNFMCAENLLLK
DLDLLDLDLDLLLLLDLLDDDLDLDL
Read the number in the range
000-255.
000 = any code length
T
HIRD
C
ONCATENATED
C
ODE
L
ENGTH
Set Third Concatenated Code
Length
AOCLCKHOBNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKFBGEIK
AKCBPJCJGIIJCMCEHIKFCDNJJK
AEFBJLBGMHPKNJCDOEAJJBHHGK
AAPHBAJJDACEMAALKPDBBFPLDK
AEKFALJPMALEIHOBMOIIEPNJKK
DLLLLDLDLDLLLLLDLLLDDLDLLL
Read the number in the range
000-255.
000 = any code length
F
OURTH
C
ONCATENATED
C
ODE
L
ENGTH
Set Fourth Concatenated Code
Length
AOCLCKHOBNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALEEGGIK
AKCBPJCJGIIJCMCFGOOOKBCLNK
AEFBJLBGMHPLMJFHDGJBNNOFGK
AAPHBAJICEGMMFOJPACAPMAFHK
AHKFAIPMJJIEOKKJBJOIAKCJLK
DLLLLDLDLDLLLLLDDLLDDLDLLL
Read the number in the range
000-255.
000 = any code length
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
DATA FORMAT
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
48
C
ONCATENATION WITH
I
NTERCODE
D
ELAY
Disabled Enabled
AOCLCKFMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFAEHIK
AKCBPJCJGIIJCMCEGKOHEIPLNK
AEFBJLBGMHPLNKDDEFMGJJDGGK
AAPHBAJICAGADJGKIBPOIBOLHK
AGKFAILHIGKOGCKPACNKMNLKLK
DLDLLDLDDLDLLLLDDLLDDLDLLL
AOCLCKFMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFGGEIK
AKCBPJCJGIIJCMCEHLNLOHEFLK
AEFBJLBGMHPLNNEHLALKDPIHGK
AAPHBAJIDDCHGAMFGMLCOJIJBK
AHKFANKOEAJIMIOKKHKGEEMLJK
DLDLLDLDDLDLLLLDLLLDDLDLLL
This parameter is enabled with
concatenation activated (see par.
3.6.1 for details).
C
ONCATENATION
F
AILURE
T
RANSMISSION
TX Codes Causing Failure No Code TX
AOCLCKHODNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFDDEIK
AKCBPJCJGIIJCMCEHJNFLKDDJK
AEFBJLBGMHPKNICCHAEBKEIHGK
AAPHBAJICHFFMKDPICNHIBABHK
AELFAMLBAPFIILEDIKOIEEEIIK
DDDLLDLDDLLLLLLDDLLDDLDLDL
AOCLCKHODNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFBHIK
AKCBPJCJGIIJCMCEGIOJBFINPK
AEFBJLBGMHPKNPFGIFDNACDGGK
AAPHBAJIDEBCJDJAGPJLOJGDBK
AFLFAJKIMJGOCBAGCPJEMNDJKK
DDDLLDLDDLLLLLLDLLLDDLDLDL
See par. 3.6.1 for details
C
ONCATENATION
T
IMEOUT
Concatenation Timeout
AOCLBLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFGHGIK
AKCBPJCJGIIJCMCFGOPMDJOBJK
AEFBJLBGMHPLNNDPHBNPJOBFGK
AAPHBAJIDEELIBJFIAEEHOPNHK
AFKFALIKKDNAKBLDFEDGAMPLKK
DDLLLDLDDLDLLLLDDLDDDLDLLL
05-99 = timeout from 5 to 99
seconds.
T
RANSMISSION
A
FTER
T
IMEOUT
No Code Transmission First Code Transmission
AOCLCKFOFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDEGIK
AKCBPJCJGIIJCMCFHOIJLDLHLK
AEFBJLBGMHPLNJHPPIEKCAFEGK
AAPHBAJJDEGMKJKMAAALNIONFK
AGKFAKJDBHEIEJNLFPPGCJBLKK
DLDLLDLDDLLLLLLDLDDDDLDLDL
AOCLCKFOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFGFIK
AKCBPJCJGIIJCMCFGPLFBMAJNK
AEFBJLBGMHPLNOALANDGIGOFGK
AAPHBAJJCHCLPAADONEHLAIPDK
AHKFAPIKNBHOODJOPKIKKAGKIK
DLDLLDLDDLLLLLLDDDDDDLDLDL
Second Code Transmission Third Code Transmission
AOCLCKFOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEAGHIK
AKCBPJCJGIIJCMCEHJPOJOPLJK
AEFBJLBGMHPKMOHPNPKOMKHHGK
AAPHBAJIDDGDPFOBLCFGFJHBHK
AEKFAMOJIIEOIONGCNOKOFJKJK
DLDLLDLDDLLLLLLDLDDDDLDLDL
AOCLCKFOFNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEEBGIK
AKCBPJCJGIIJCMCEGMLPPFIPPK
AEFBJLBGMHPLNKEGEGPMFODGGK
AAPHBAJIDDFNGKJFMKMCCIKBHK
AHLFANJHLABMCHMKLPECOHPIIK
DLLLLDLDDLLLLLLDLDLDDLDLLL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
DATA FORMAT
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
49
C
ONCATENATION
R
ESULT
C
ODE
ID
No Code Identifier Use First Code Identifier
AOCLCKFMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEFEHIK
AKCBPJCJGIIJCMCFHJKBJHCJJK
AEFBJLBGMHPLNIALGPDINCKEGK
AAPHBAJIDACAPAGHGGNBOFFNBK
AHKFAIJNOOBGAABMKGAOAIMILK
DDDLLDLDLDDLLLLDLLDDDLDLLL
AOCLCKFMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDGEIK
AKCBPJCJGIIJCMCFGIJNDIJHPK
AEFBJLBGMHPLNPHPJKEEHEBFGK
AAPHBAJICDGHKJMIILJNINDPHK
AGKFANIECICAKKFJADHCIBLJJK
DDDLLDLDLDDLLLLDDLDDDLDLLL
Use Second Code Identifier Use Third Code Identifier
AOCLCKFMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFGGGIK
AKCBPJCJGIIJCMCEHONGLKGFLK
AEFBJLBGMHPKMPALEINMDIIHGK
AAPHBAJJDHCPKMCKNEIMGEMBDK
AFKFAOOHHBBAMHBBNEBCMEEJIK
DDDLLDLDLDDLLLLDLLDDDLDLLL
AOCLCKFMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKFCBHIK
AKCBPJCJGIIJCMCEGLJHNBBBNK
AEFBJLBGMHPLNLDCNBIOKMMGGK
AAPHBAJJDHBBDDFOKMBIBFBBDK
AGLFAPJJEJECGOANEGLKMGCLJK
DDLLLDLDLDDLLLLDLLLDDLDLDL
Use Fourth Code Identifier
AOCLCKFMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALEHBFIK
AKCBPJCJGIIJCMCFHNNMFDODJK
AEFBJLBGMHPKMLEGADBGOAFEGK
AAPHBAJICDFJDGLMPDAJPMOPHK
AFLFAMPKBAHCADEFJBNKIDNLIK
DDLLLDLDLDDLLLLDDLLDDLDLDL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
CAMERA
CONTROL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
50
CAMERA CONTROL
E
XPOSURE
M
ODE
Fixed Automatic (Entire Image)
AOCKCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEAAHIK
AKCBPJCJGIIJCMCEHNKLAOBDLK
AEFBJLBGMHPLNIHMNGHNIAMHGK
AAPHBAJJDABJLGILJIGIHPPHDK
AGKFAMNMEBAKAEJAPFJMOLIIIK
DLDLLLLDDLLLLLLDLDLDDLDLLL
AOCKCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGCEIK
AKCBPJCJGIIJCMCEGMJHKBKNNK
AEFBJLBGMHPLNPAICDABCGHGGK
AAPHBAJJCDFOOPCEHFCEBHJFFK
AHKFAJMFIHDMKONFFAOAGCPJKK
DLDLLLLDDLLLLLLDDDLDDLDLLL
Automatic (Central Part of Image)
Automatic for Highly
Reflective Surfaces
AOCKCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFDCGIK
AKCBPJCJGIIJCMCFHKNMCDFPJK
AEFBJLBGMHPKMPHMPBJJGKOEGK
AAPHBAJIDHBGOKMGCKDFPOGLBK
AEKFAKKGNOAMMDJNIHIACHAJLK
DLDLLLLDDLLLLLLDLDLDDLDLLL
AOCKCKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKFHFHIK
AKCBPJCJGIIJCMCFGPJNEICLPK
AEFBJLBGMHPLNLEFGIMLPOKFGK
AAPHBAJIDHCIHFLCFCKBIPLLBK
AHLFALNIOGFOGKIBBFCICFGLKK
DLLLLLLDDLLLLLLDLDDDDLDLDL
See par. 3.5 for details.
C
AMERA
C
ALIBRATION
Calibrate
AOCKBPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFCFFIK
AKCBPJCJGIIJCMCEHJPPCFHFPK
AEFBJLBGMHPLNOHDNEHOADLFGK
AAPHBAJJCFAEFIMMIJAHFFPLHK
AFLFAJMEOOLACCNFOEMMKIELLK
DLDLLLLDDDLLLLLDDDDDDLDLLL
Calibrates the correct exposure
parameter values when using
fixed exposure. The parameters
defined will be permanently saved
in the reader memory (see
par. 3.5 for details).
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
CODE SELECTION
Linear Symbologies
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
51
CODE SELECTION
Disable All Symbologies Disable All Linear Symbologies
APCPCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFHEHIK
AKCBPJCJGIIJCMCEHPIFJNCLPK
AEFBJLBGMHPKNPEHGMLHNABFGK
AAPHBAJICFBOAJJGCKPDGADNBK
AEKFAPJAJPBAEIBFNOAIKGGIKK
DLDLDDLDDDLLLLLDDLLDDLDLLL
APCPGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFBCHIK
AKCBPJCJGIIJCMCEHKPMGLHBNK
AEFBJLBGMHPKMIHDGICIAJMGGK
AAPHBAJIDBDPPIKJPJAMPIPNDK
AHKFAOKLLANCKCDCCIECCDLKKK
DDLLDDLDLLDLLLLDDLDDDLDLDL
Disable All 2D Symbologies
APCPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFFCFIK
AKCBPJCJGIIJCMCFHIOCODMJNK
AEFBJLBGMHPKNPDAMNNPKGLEGK
AAPHBAJJCAGEAGOFFMPMIIJHBK
AFLFALLLOMIKOEILGAEMAFDJJK
DLLLDDLDLDDLLLLDLDLDDLDLDL
I
SSUE
I
DENTICAL
C
ODES
Disabled Enabled
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEGEFIK
AKCBPJCJGIIJCMCEGONNMKEBLK
AEFBJLBGMHPKMKDMODLODEPFGK
AAPHBAJJCEAFDONHGICMHEOBFK
AHLFAKKKKLPAGMBPDCNCEFJJJK
DLDLDDLDLDLLLLLDDDLDDLDLLL
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEAGGIK
AKCBPJCJGIIJCMCEHPOBGFPPNK
AEFBJLBGMHPKMNEIBGMCJCEEGK
AAPHBAJJDHECGHHIIFGABMIDDK
AGLFAPLDGNMGMGFKJHKOMMOILK
DLDLDDLDLDLLLLLDLDLDDLDLLL
See par. 6.3.1 for details.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
CODE SELECTION
Linear Symbologies
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
52
Linear Symbologies
UPC/EAN/JAN
F
AMILY
EAN/UPC/JAN Disabled EAN/UPC/JAN Enabled
APCLCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHAGIK
AKCBPJCJGIIJCMCFHPJEAPMJJK
AEFBJLBGMHPKNJGOAPBLPJDHGK
AAPHBAJJDDGHGLPOOCPECPMHBK
AEKFANIFNPLCKOPGILGOAPPJIK
DLDLLLLDDLDLLLLDDLDDDLDLLL
APCLCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBCFIK
AKCBPJCJGIIJCMCFGOKIKAHHPK
AEFBJLBGMHPKNOBKPKGHFPIGGK
AAPHBAJJCACADCFBAPLIEHKFHK
AFKFAIJMBJIEAELDCOBCIGIIKK
DLDLLLLDDLDLLLLDLLDDDLDLLL
Add-On Disabled Add-On Enabled
APCLCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECAGIK
AKCBPJCJGIIJCMCEGMNCNABLNK
AEFBJLBGMHPKNLFGCFOFLCKFGK
AAPHBAJJCDCHKCPDAFNLELHBHK
AFKFANKPLHAKMMEFCPLKMKILIK
DDDLLLLDLDDLLLLDLLLDDLDLLL
APCLCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEECFIK
AKCBPJCJGIIJCMCEHNOOHPKFLK
AEFBJLBGMHPKNMCCNAJJBEBEGK
AAPHBAJJDAGAPLFMOIJHCDBDBK
AEKFAILGHBDMGGAAIKMGEDPKKK
DDDLLLLDLDDLLLLDDLLDDLDLLL
UPCE Expansion Disabled UPCE Expansion Enabled
APCLCOFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEEFFIK
AKCBPJCJGIIJCMCFHONJFCELPK
AEFBJLBGMHPKMOGEHEDECGPHGK
AAPHBAJJCEGAPBDAIMJHOMLDDK
AGLFANOFFIFOCCMEAMJEKCELJK
DLDLLLLDDDLLLLLDDLLDDLDLDL
APCLCOFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECHGIK
AKCBPJCJGIIJCMCFGPOFPNPFJK
AEFBJLBGMHPKMJBAIBEIIAEGGK
AAPHBAJJDHCHKIJPGBNLIENBFK
AHLFAIPMJOGIIIIBKJOICLDKLK
DLDLLLLDDDLLLLLDLLLDDLDLDL
C
ODE
39
F
AMILY
Code 39 Std - Disabled
Code 39 Std - No Check Digit
Control
APCPCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEACHIK
AKCBPJCJGIIJCMCEHMOOACIBLK
AEFBJLBGMHPLNJFIOHOGPCCEGK
AAPHBAJJCHACGHGINLINEBBHHK
AFKFAKJMEMGGGAJIEDJCKCIJIK
DDLLLLLDLDDLLLLDDLLDDLDLLL
APCPCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGAEIK
AKCBPJCJGIIJCMCEGNNCKNDPNK
AEFBJLBGMHPLNOCMBCJKFEJFGK
AAPHBAJJDEEFDOMHDGMBCJHFBK
AEKFAPIFIKFAMKNNOGOOCLPIKK
DDLLLLLDLDDLLLLDLLLDDLDLLL
Code 39 Std - Check Digit Control
without Transmission
Code 39 Std - Check Digit Control
and Transmission
APCPCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFDAGIK
AKCBPJCJGIIJCMCFHLJJCPMNJK
AEFBJLBGMHPKMOFIMAACBIAHGK
AAPHBAJICAANDLCFGJNAMAILFK
AHKFAMOGNDGAKHJFDBIOGOAILK
DDLLLLLDLDDLLLLDDLLDDLDLLL
APCPCKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKFHHHIK
AKCBPJCJGIIJCMCFGONIEELJPK
AEFBJLBGMHPLNKGBFJFAIMEGGK
AAPHBAJICADDKEFBBBEELBFLFK
AELFANJIOLDCAOIJKDCGGMGKKK
DDDLLLLDLDDLLLLDDLDDDLDLDL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
CODE SELECTION
Linear Symbologies
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
53
Code 39 Full ASCII - Disabled Code 39 Full ASCII- Enabled
APCPCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFCHIK
AKCBPJCJGIIJCMCFGPKINNFDPK
AEFBJLBGMHPLNLGAMNBILJLGGK
AAPHBAJJDHECKOGFDMKCCFKBBK
AEKFAKLGCENOACCLOHEGGHPLIK
DLLLLLLDDLDLLLLDLLDDDLDLLL
APCPCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDAEIK
AKCBPJCJGIIJCMCFHOJEHCONJK
AEFBJLBGMHPLNMBEDIGEBPAHGK
AAPHBAJJCEAFPHMKNBOOENMDHK
AFKFAPKPOCOIKIGOECDKOOIKKK
DLLLLLLDDLDLLLLDDLDDDLDLLL
Code Length Check - Disabled Code Length Check - Enabled
APCPCKFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEHNKDFPADNK
AEFBJLBGMHPLMOFCJMMJCNOEGK
AAPHBAJJDAAFPNKGLFOOICGDFK
AHLFAKPMMLIKOMKKMEGIAPDLJK
DDLLLLLDLLLLLLLDDLDDDLDLDL
APCPCKFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFFHIK
AKCBPJCJGIIJCMCEGMJPPALNLK
AEFBJLBGMHPLMJCGGJLFILFFGK
AAPHBAJJCDECKEAJFIKCOKABDK
AGLFAPOFANLMEGOPGBBEIGEKLK
DDLLLLLDLLLLLLLDLLDDDLDLDL
Minimum Code Length
APCPBLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFGEEIK
AKCBPJCJGIIJCMCEGNNGNFFFPK
AEFBJLBGMHPLMKBCBFFMJDKFGK
AAPHBAJIDACCNFJPDFKBCEHDHK
AELFALOFHPBCAEMCMPKICKNLJK
DLDLLLLDLLDLLLLDLDDDDLDLLL
Read the number in the range
001-255.
Maximum Code Length
APCPBLFMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEAEFIK
AKCBPJCJGIIJCMCEGKPOPBMLNK
AEFBJLBGMHPLMLGGICCOGBFFGK
AAPHBAJJDEGOIMFEFDHLBJMDDK
AFLFAJOLIGEMENAFDGFAALAIIK
DDDLLLLDDDLLLLLDLLDDDLDLDL
Read the number in the range
001-255.
Start-Stop Character
Transmission - Disabled
Start-Stop Character
Transmission - Enabled
APCPCKFMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEFHFIK
AKCBPJCJGIIJCMCEHKILHLJNPK
AEFBJLBGMHPLMPCGALLLNPBEGK
AAPHBAJIDEEJKEGNNDDELPNDBK
AGLFAIPCDCNEKFGNDNJACOOIIK
DLLLLLLDDDDLLLLDDDDDDLDLLL
APCPCKFMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDFGIK
AKCBPJCJGIIJCMCEGLLHNECDJK
AEFBJLBGMHPLMIFCPOMHHJKFGK
AAPHBAJICHAOPNMCDOHINHLBHK
AHLFANOLPEOCAPCIJIOMKHJJKK
DLLLLLLDDDDLLLLDLDDDDLDLLL
C
ODE
32
F
AMILY
Disabled Enabled
APCPCKFOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEDFEIK
AKCBPJCJGIIJCMCEGPNMPAEJPK
AEFBJLBGMHPKNLEJNCGBMPJFGK
AAPHBAJJCADHJEDNNIKEEBPNHK
AHLFAOJKMFJAIJHEMLKACLHLLK
DLLLLLLDLDLLLLLDDLLDDLDLDL
APCPCKFOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEFHHIK
AKCBPJCJGIIJCMCEHOOAFPPHJK
AEFBJLBGMHPKNMDNCHBNGJCEGK
AAPHBAJJDDHAMNJCDFOICJJPBK
AGLFALIDADKGCDDBGONMKCAKJK
DLLLLLLDLDLLLLLDLLLDDLDLDL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
CODE SELECTION
Linear Symbologies
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
54
I
NTERLEAVED
2
OF
5
F
AMILY
Disabled
Enabled - No Check Digit
Control
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBGGIK
AKCBPJCJGIIJCMCFHKONPJJDLK
AEFBJLBGMHPKMOFKALIECAOEGK
AAPHBAJJCHEGJKMBDBALLHAHDK
AHKFAMLOPAHAEENBHNCEIKCLIK
DDLLLLLDLDLLLLLDDLLDDLDLDL
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHEFIK
AKCBPJCJGIIJCMCFGLNBFGCNNK
AEFBJLBGMHPKMJCOPOPIIGFFGK
AAPHBAJJDEABMDGONMEHNPGFFK
AGKFAJKHDGEGOOJENIFIADFKKK
DDLLLLLDLDLLLLLDLLLDDLDLDL
Enabled - Check Digit Control
and without Transmission
Enabled - Check Digit Control
and Transmission
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKECEHIK
AKCBPJCJGIIJCMCEHNJKNENPJK
AEFBJLBGMHPLNJFKCMGAMKMHGK
AAPHBAJICAEJMGIMIDFGDGJLBK
AFKFAKMEGPHGIDNMAPDIEGKKLK
DDLLLLLDLDLLLLLDDLLDDLDLDL
APCLGOHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEGDGIK
AKCBPJCJGIIJCMCEGINLLPKLPK
AEFBJLBGMHPKMNGDLFDCFOIGGK
AAPHBAJICAHHFJPIPLMCEHELBK
AGLFALLKFHCECKMAJNJAEEMIKK
DDDLLLLDLDLLLLLDDLDDDLDLLL
Code Length Check - Disabled Code Length Check - Enabled
APCLGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEEGGIK
AKCBPJCJGIIJCMCEGJKLCGEBPK
AEFBJLBGMHPKMMGCCBHKGLHGGK
AAPHBAJJDHAGFDMMNGCENDLBFK
AGKFAMJEJIMICGGCNJPAEPFJIK
DLLLLLLDDLLLLLLDLLDDDLDLDL
APCLGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALECEFIK
AKCBPJCJGIIJCMCEHIJHIJPPJK
AEFBJLBGMHPKMLBGNEAGMNMHGK
AAPHBAJJCEEBAKGDDLGILLNDDK
AHKFAJINFOPOIMCHHMIMMGCIKK
DLLLLLLDDLLLLLLDDLDDDLDLDL
Minimum Code Length
APCLFPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFCAFIK
AKCBPJCJGIIJCMCEHIJDPBJFLK
AEFBJLBGMHPKNPCINDMAAKPHGK
AAPHBAJICACGOBDLDIAILGNFFK
AHLFANONKLLMECDIFFMKMHALJK
DDDLLLLDDDLLLLLDDDLDDLDLDL
Read the number in the range
001-255.
Maximum Code Length
APCLFPFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEHAFIK
AKCBPJCJGIIJCMCFGLNFCOEHPK
AEFBJLBGMHPKNNBAPJDOEBGFGK
AAPHBAJIDAGGCIDGNPCHNCGDDK
AGLFANMHMDAECAILPBBOACHJJK
DLDLLLLDLLLLLLLDLDDDDLDLDL
Read the number in the range
001-255.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
CODE SELECTION
Linear Symbologies
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
55
C
ODABAR
F
AMILY
Disabled
Enabled - No Check Digit
Control
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFDAEIK
AKCBPJCJGIIJCMCEHNIKIHHBJK
AEFBJLBGMHPKMOCNKKOMFGEFGK
AAPHBAJICCDMJFLCEHAEFPKNDK
AGLFAIJFIDOKOIEPMDGACJHKLK
DDDLLLLDDDDLLLLDLDLDDLDLLL
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFCHIK
AKCBPJCJGIIJCMCEGMLGCIMPPK
AEFBJLBGMHPKMJFJFPJAPAPEGK
AAPHBAJIDBHLMMBNKKEIDHMPFK
AHLFANIMEFNMECAKGGBMKAALJK
DDDLLLLDDDDLLLLDDDLDDLDLLL
Enabled - Check Digit Control
without Transmission
Enabled - Check Digit Control
and Transmission
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEACFIK
AKCBPJCJGIIJCMCFHKPNKKDNLK
AEFBJLBGMHPLNJCNINAILMGGGK
AAPHBAJJCFDDMJPPPFFJNODBBK
AELFAOOPBMOMCPECLBHMOFPLIK
DDDLLLLDDDDLLLLDLDLDDLDLLL
APCLGKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKEEFEIK
AKCBPJCJGIIJCMCFGPLMMBEJNK
AEFBJLBGMHPKMNBEBEFKCICHGK
AAPHBAJJCFANFGILINMNKPOBBK
AHKFAPJBCELOIGFOCDNEOHJJJK
DDLLLLLDDDDLLLLDLDDDDLDLDL
Code Length Check - Disabled Code Length Check - Enabled
APCLGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEGAEIK
AKCBPJCJGIIJCMCFGOMMFIKDNK
AEFBJLBGMHPKMMBFIABCBNNHGK
AAPHBAJIDCHMFMLPKACLDLBLFK
AHLFAILPOLFCIKPMGHLEOMAILK
DLDLLLLDLLDLLLLDDDDDDLDLLL
APCLGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEACHIK
AKCBPJCJGIIJCMCFHPPAPHBNLK
AEFBJLBGMHPKMLGBHFGOLLGGGK
AAPHBAJICBDLAFBAENGHFDHJDK
AGLFANKGCNGECALJMCMIGFHJJK
DLDLLLLDLLDLLLLDLDDDDLDLLL
Minimum Code Length
APCLFLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFAGHIK
AKCBPJCJGIIJCMCFHPPEIPHHJK
AEFBJLBGMHPKNPFPHCKIHMFGGK
AAPHBAJJCFFMOOEIEOAHFOHPFK
AGKFAJMGNICGOOKGOLIOGEFKKK
DDLLLLLDLDDLLLLDLLLDDLDLLL
Read the number in the range
001-255.
Maximum Code Length
APCLFLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEFGHIK
AKCBPJCJGIIJCMCEGMLCFAKFNK
AEFBJLBGMHPKNNGHFIFGDHMEGK
AAPHBAJJDFBMCHEFKJCIDKMJDK
AHKFAJOMLAJOIMBFEPFKKBCIKK
DLLLLLLDDLDLLLLDDLDDDLDLLL
Read the number in the range
001-255.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
CODE SELECTION
Linear Symbologies
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
56
C
ODE
128
F
AMILY
Code 128 - Disabled Code 128 - Enabled
APCPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECEFIK
AKCBPJCJGIIJCMCFHLIJHMGDJK
AEFBJLBGMHPLNJCPEGIOIEIFGK
AAPHBAJICCHIGIBLKNICKJLNHK
AELFAOLHDPPMMMAGPNNGABNILK
DDDLLLLDDDLLLLLDLDLDDLDLDL
APCPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEEGGIK
AKCBPJCJGIIJCMCFGKLFNDNNPK
AEFBJLBGMHPLNOFLLDPCCCDEGK
AAPHBAJIDBDPDBLEEAMOMBNPBK
AFLFALKOPJMKGGEDFIKKIIKJJK
DDDLLLLDDDLLLLLDDDLDDLDLDL
Code Length Check - Disabled Code Length Check - Enabled
APCPCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHEFIK
AKCBPJCJGIIJCMCEGIMPKDLBNK
AEFBJLBGMHPLNLBHGMHAMPBHGK
AAPHBAJIDCDIKBBGEKKNMNALBK
AFLFAOJNFHEEKOLFFJACMEKKLK
DLDLLLLDLLLLLLLDDDDDDLDLDL
APCPCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBGGIK
AKCBPJCJGIIJCMCEHJPDAMAPLK
AEFBJLBGMHPLNMGDJJAMGJKGGK
AAPHBAJICBHPPILJKHOBKFGJHK
AELFALIEJBHCAEPAPMHOENNLJK
DLDLLLLDLLLLLLLDLDDDDLDLDL
Code 128 - Min. Code Length
APCPBPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEBCGIK
AKCBPJCJGIIJCMCEHJPHHEGFJK
AEFBJLBGMHPLMIFNJOMKKOJGGK
AAPHBAJJCFBIBDOBKEIBKIGPBK
AEKFAPOEGEDAMKOPNFDIEMPIKK
DDLLLLLDLDLLLLLDLLLDDLDLDL
Read the number in the range
001-255.
Code 128 - Max. Code Length
APCPBPFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFECGIK
AKCBPJCJGIIJCMCFGKLBKLLHNK
AEFBJLBGMHPLMKGFLEDEOFAEGK
AAPHBAJJDFFINKOMEDKOMMNJHK
AFKFAPMOAMIIKIFMHBOMIJIKKK
DLLLLLLDDLLLLLLDDLDDDLDLDL
Read the number in the range
001-255.
EAN 128 - Disabled EAN 128 - Enabled
APCPGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEEHEIK
AKCBPJCJGIIJCMCFHPIMDPEDNK
AEFBJLBGMHPKNMBAFIGHBHMGGK
AAPHBAJIDFHLMDPGCLGGHFPJHK
AFLFAJOCNPLGABOEOJOGCBLIIK
DDLLDLLDDDDLLLLDLLLDDLDLLL
APCPGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECFHIK
AKCBPJCJGIIJCMCFGOLAJAPNLK
AEFBJLBGMHPKNLGEKNBLLBHHGK
AAPHBAJICGDMJKFJMGCKBNJLBK
AELFAMPLBJIAKLKBEMJKKIMJKK
DDLLDLLDDDDLLLLDDLLDDLDLLL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
CODE SELECTION
Linear Symbologies
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
57
EAN 128 - Code Length Check
Disabled
EAN 128 - Code Length Check
Enabled
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFBHEIK
AKCBPJCJGIIJCMCEGMMKOAJBJK
AEFBJLBGMHPKNOCIHCJJFMFEGK
AAPHBAJICFDLAKPLMMEJBBEPBK
AELFAJMILHAOGDFHENDCOEMKIK
DLLLDLLDLLDLLLLDDLDDDLDLLL
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFHFHIK
AKCBPJCJGIIJCMCEHNPGEPCPPK
AEFBJLBGMHPKNJFMIHOFPKOFGK
AAPHBAJIDGHMFDFECBAFHJCNHK
AFLFAMNBHBDIMJBCOIEOGNLLKK
DLLLDLLDLLDLLLLDLLDDDLDLLL
EAN 128 - Min. Code Length
APCPFPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEHBHIK
AKCBPJCJGIIJCMCEHNPCDHEFNK
AEFBJLBGMHPKMNGCIACDDNNFGK
AAPHBAJJDCBLLIAMCCGFHECLBK
AFKFAILBIEHKAHANMBAIGMJIJK
DDDLDLLDLDDLLLLDLDLDDLDLLL
Read the number in the range
001-255.
Maximum Code Length
APCPFPFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFCBHIK
AKCBPJCJGIIJCMCFGOLEOIJHJK
AEFBJLBGMHPKMPFKKKNNHGEHGK
AAPHBAJJCCFLHBABMFEKBAJNHK
AEKFAIJLOMMCGFLOGFNMKJOKJK
DLDLDLLDDLDLLLLDDDDDDLDLLL
Read the number in the range
001-255.
C
ODE
93
F
AMILY
Disabled Enabled
APCLCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFGEIK
AKCBPJCJGIIJCMCEHIPDHBCLLK
AEFBJLBGMHPKNJBJKOHDIPJGGK
AAPHBAJIDGBNGEINJEPLMHGNBK
AFLFAJKOKMCIACGIDFCKKMKILK
DLLLLLLDLLLLLLLDLDDDDLDLDL
APCLCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDEHIK
AKCBPJCJGIIJCMCEGJMPNOJFNK
AEFBJLBGMHPKNOGNFLAPCJCHGK
AAPHBAJICFFKDNCCHJLHKPAPHK
AELFAMLHGKBOKICNJAFGCFNJJK
DLLLLLLDLLLLLLLDDDDDDLDLDL
Code Length Check - Disabled Code Length Check - Enabled
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEAGEIK
AKCBPJCJGIIJCMCFGLLFKOPJPK
AEFBJLBGMHPKNLCBIEINMEAEGK
AAPHBAJICGFNKNIAHDNEKDNLHK
AELFAJIEMEJAGANLJBPOGJNKLK
DDLLLLLDDDLLLLLDDDLDDLDLDL
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGEHIK
AKCBPJCJGIIJCMCFHKIJABEHJK
AEFBJLBGMHPKNMFFHBPBGCLFGK
AAPHBAJIDFBKPECPJOJIMLLJBK
AFLFAMJNACKGMKJODEICOAKLJK
DDLLLLLDDDLLLLLDLDLDDLDLDL
Minimum Code Length
APCLBLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFGAHIK
AKCBPJCJGIIJCMCFHKINHJCNLK
AEFBJLBGMHPKMIGLHGDHKFIFGK
AAPHBAJJDBHNBPHHJNPIMGLPHK
AFKFAIPNPHOEAEIBBNMEOBIIKK
DLDLLLLDDLLLLLLDLLDDDLDLDL
Read the number in the range
001-255.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
CODE SELECTION
Linear Symbologies
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
58
Maximum Code Length
APCLBLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEDAHIK
AKCBPJCJGIIJCMCEGJMLKGPPPK
AEFBJLBGMHPKMKFDFMMJOOBHGK
AAPHBAJJCBDNNGHKHKNHKCAJBK
AEKFAINHJPFMGGDCLJBACEPKKK
DDDLLLLDLDLLLLLDDLLDDLDLDL
Read the number in the range
001-255.
RSS
F
AMILY
Disable RSS Expanded Enable RSS Expanded
APCLCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEADHIK
AKCBPJCJGIIJCMCFHNIDCFBJLK
AEFBJLBGMHPKMNHKJODMJBJGGK
AAPHBAJIDCFJFPNCEGJBEKGJFK
AHKFAOOHMDEMKBLOPEIOKOKKJK
DLLLLDLDDDLLLLLDDDLDDLDLLL
APCLCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGBEIK
AKCBPJCJGIIJCMCFGMLPIKKHNK
AEFBJLBGMHPKMKAOGLEADHCHGK
AAPHBAJICBBOAGHNKLNNCCALDK
AGKFALPOAFHKALPLFBPCCHNLLK
DLLLLDLDDDLLLLLDLDLDDLDLLL
Disable RSS Limited Enable RSS Limited
APCLCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFDHIK
AKCBPJCJGIIJCMCEGOMFPKMLPK
AEFBJLBGMHPKMPECLEMCNKAEGK
AAPHBAJICCBJJGNPKBLOCONPDK
AGKFAOMNKLPEMDANFAFKGLNIJK
DDLLLDLDLLLLLLLDLDDDDLDLLL
APCLCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDBEIK
AKCBPJCJGIIJCMCEHPPJFFHFJK
AEFBJLBGMHPKMIDGEBLOHMLFGK
AAPHBAJIDBFOMPHAEMPCEGLNFK
AHKFALNEGNMCGJEIPFCGOCKJLK
DDLLLDLDLLLLLLLDDDDDDLDLLL
Disable RSS 14 Enable RSS 14
APCLCOFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDGEIK
AKCBPJCJGIIJCMCFHMMOHIJLNK
AEFBJLBGMHPKNKHAOFBDEOFGGK
AAPHBAJICFFOMFBMCIPCIJBNHK
AFLFAOIHEEKACNIMHDHEADBIIK
DLLLLDLDDLDLLLLDDDDDDLDLDL
APCLCOFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFEHIK
AKCBPJCJGIIJCMCFGNPCNHCFLK
AEFBJLBGMHPKNNAEBAGPOIOHGK
AAPHBAJIDGBJJMLDMFLOOBHPBK
AELFALJOICJGIHMJNGAIIKGJKK
DLLLLDLDDLDLLLLDLDDDDLDLDL
Disable RSS Expanded
Stacked Enable RSS Expanded Stacked
APCLCOFOFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEGGEIK
AKCBPJCJGIIJCMCEGPIIKHEJJK
AEFBJLBGMHPKNIEIMPONAFMEGK
AAPHBAJIDFBOAMBBMPNNONKLBK
AELFAOKNCMBIEPDPNHKAMGGKIK
DDLLLDLDLDDLLLLDLDLDDLDLDL
APCLCOFOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEAEHIK
AKCBPJCJGIIJCMCEHOLEAIPHPK
AEFBJLBGMHPKNPDMDKJBKDHFGK
AAPHBAJICGFJFFLOCCJBIFMJHK
AFLFALLEOKCOOFHKHCNMEPBLKK
DDLLLDLDLDDLLLLDDDLDDLDLDL
Disable RSS 14 Stacked Enable RSS 14 Stacked
APCLCOFMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFAGFIK
AKCBPJCJGIIJCMCEGIKAIDNHLK
AEFBJLBGMHPKNJDMFIJPPHDEGK
AAPHBAJJDBFCFFNKKJAHNABLFK
AFLFAMKDNFEGAGPICOFIOHLJJK
DLLLLDLDDLLLLLLDLLLDDLDLLL
APCLCOFMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFGEGIK
AKCBPJCJGIIJCMCEHJJMCMGJNK
AEFBJLBGMHPKNOEIKNODFBIFGK
AAPHBAJJCCBFAMHFEEELLIHJDK
AELFAJLKBDHAKMLNILCEGOMILK
DLLLLDLDDLLLLLLDDLLDDLDLLL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
CODE SELECTION
2D Symbologies
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
59
2D Symbologies
PDF417
Disabled Enabled
APCPGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFDBEIK
AKCBPJCJGIIJCMCFHMOHKAOJJK
AEFBJLBGMHPLNKAPNDDGDFPHGK
AAPHBAJJDHGHKNAINKBIFENDBK
AELFAMOOAMMACJGJHEHMCFFJKK
DLDLLDLDLDLLLLLDLLLDDLDLLL
APCPGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFDHIK
AKCBPJCJGIIJCMCFGNNLAPFHPK
AEFBJLBGMHPLNNHLCGEKJDEGGK
AAPHBAJJCECAPEKHDHFEDMLBHK
AFLFAJPHMKPGIDCMNBAAKMCIIK
DLDLLDLDLDLLLLLDDLLDDLDLLL
Macro PDF417 Unbuffered
Mode Macro PDF417 Buffered Mode
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEADFIK
AKCBPJCJGIIJCMCFGKMJBLIDJK
AEFBJLBGMHPLMJCKJOPLIOJEGK
AAPHBAJICFHPPHFCCGMPOHFPFK
AGLFAPOKALBIEHBOHDIEMMGIIK
DLLLDLLDLLLLLLLDDLDDDLDLDL
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEGBGIK
AKCBPJCJGIIJCMCFHLPFLEDNPK
AEFBJLBGMHPLMOFOGLIHCICFGK
AAPHBAJIDGDIKOPNMLIDIPDNDK
AHLFAKPDMNCOONFLNGPIEFBJKK
DLLLDLLDLLLLLLLDLLDDDLDLDL
The following command carries out its specific function and does not require
reading the Enter or Exit and Save Configuration codes.
Abort Macro PDF417 Buffered
Mode
AMHOHNBOHNGNENEIEPANHOGOCK
AHNBMBIMDKEOFMHMLJAKFDFGJK
AKCBPJCJGIIJCMCEHNJNLOIBNK
AEFBJLBGMHPLNLDJJICILJCHGK
AAPHBAJIDGAIDDPMENJHMACFDK
AELFAONOEEHGMMCDPDLGGHLLJK
DDLLLLLLLDDLLLLDDLDDDLDLDL
It stops buffering the read codes
at any time. All the buffered
codes will not be saved.
M
ICRO
PDF417
Disabled Enabled
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEGBEIK
AKCBPJCJGIIJCMCEGPKBHPDLNK
AEFBJLBGMHPLNIDHPJMIHOGFGK
AAPHBAJJCHCHGEAFDNDHDAGFHK
AFLFAMMEGEHIELNKNAKIOACLKK
DDDLLDLDDLLLLLLDDLDDDLDLLL
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEADHIK
AKCBPJCJGIIJCMCEHOJNNAIFLK
AEFBJLBGMHPLNPEDAMLENINEGK
AAPHBAJJDEGADNKKNAHLFIAHBK
AELFAJNNKCEOOBJPHFNEGJFKIK
DDDLLDLDDLLLLLLDLLDDDLDLLL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
CODE SELECTION
2D Symbologies
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
60
D
ATA
M
ATRIX
F
AMILY
Disabled Enabled
APCPGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBHGIK
AKCBPJCJGIIJCMCEHLIANOALLK
AEFBJLBGMHPLNKHIHCFOEDFGGK
AAPHBAJIDCBNKCHLKMBHLMHJBK
AFKFAIMFHPFKIFPHMKDIIGAIJK
DLLLLDLDDDDLLLLDDDLDDLDLDL
APCPGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHFFIK
AKCBPJCJGIIJCMCEGKLMHBLFNK
AEFBJLBGMHPLNNAMIHCCOFOHGK
AAPHBAJICBFKPLNEEBFLNEBLHK
AEKFANNMLJGMCPLCGPEEAPHJLK
DLLLLDLDDDDLLLLDLDLDDLDLDL
Minimum Code Length
APCPFLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFCBFIK
AKCBPJCJGIIJCMCFHJPONGANLK
AEFBJLBGMHPLMLAKKKBKGJEFGK
AAPHBAJJDFHNNJIBKFBELNKLHK
AFLFAJJGCEJGIDBOOCNGMLCIIK
DLDLLDLDLDDLLLLDDLLDDLDLDL
Read the number in the range
0001-3600.
Maximum Code Length
APCPFLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEHBFIK
AKCBPJCJGIIJCMCEGKLIAJNPPK
AEFBJLBGMHPLMJDCIAOECCNHGK
AAPHBAJJCFDNBAIMECDLNJBNBK
AELFAJLMEMCOOBKNEGACAOFKIK
DDDLLDLDDLDLLLLDLLDDDLDLDL
Read the number in the range
0001-3600.
Rectangular Style – Disabled Rectangular Style - Enabled
APCPGKFMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEBCEIK
AKCBPJCJGIIJCMCFGOKDHIMFLK
AEFBJLBGMHPLMODOLEPNCFPEGK
AAPHBAJJDBBGKIHDEDIBCGALBK
AHLFAKIBGJFACCLBBAOOMPBLJK
DLLLLDLDDLDLLLLDLLLDDLDLDL
APCPGKFMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEHAHIK
AKCBPJCJGIIJCMCFHPJPNHHLNK
AEFBJLBGMHPLMJEKEBIBIDEFGK
AAPHBAJJCCFBPBNMKOMNEOGJHK
AGLFAPJIKPGGIIPELFJCEGGKLK
DLLLLDLDDLDLLLLDDLLDDLDLDL
QR
F
AMILY
Disabled Enabled
APCPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFHEIK
AKCBPJCJGIIJCMCFHJJOFGLDLK
AEFBJLBGMHPLMNDLNHKJOMCEGK
AAPHBAJJCDEGFMDHAJOHMMBDDK
AHLFANNFCDACMDEOICDGKAILKK
DDLLLDLDDLDLLLLDLLDDDLDLDL
APCPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDFHIK
AKCBPJCJGIIJCMCFGIKCPJANNK
AEFBJLBGMHPLMKEPCCNFEKJFGK
AAPHBAJJDAABAFJIOEKLKEHBFK
AGLFAIMMOFDEGJALCHEKCJPKIK
DDLLLDLDDLDLLLLDDLDDDLDLDL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
CODE SELECTION
2D Symbologies
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
61
P
OSTAL
C
ODES
F
AMILY
All Disabled Australian Post - Enabled
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEEDFIK
AKCBPJCJGIIJCMCEHPJNKNKBLK
AEFBJLBGMHPKNKDJDLMLDOOEGK
AAPHBAJJCDACKBJOODGBDKADHK
AFLFALPHJPBEOHAHLMIAIICJKK
DDLLLDLDDLLLLLLDLLDDDLDLLL
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALECBGIK
AKCBPJCJGIIJCMCEGOKBACBPNK
AEFBJLBGMHPKNNENMOLHJIFFGK
AAPHBAJJDAEFPIDBAOCNFCGBBK
AELFAOOOFJCCENECBJPMABFIIK
DDLLLDLDDLLLLLLDDLDDDLDLLL
Japan Post - Enabled PLANET - Enabled
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFHBEIK
AKCBPJCJGIIJCMCFHIOKIAONJK
AEFBJLBGMHPLMNDJBMCPNEMHGK
AAPHBAJICEANPNNDFBDMLLJPFK
AHLFANINAABCCAAKMOJMEEKIJK
DDLLLDLDDLLLLLLDLLDDDLDLLL
APCLGKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALFDGFIK
AKCBPJCJGIIJCMCFGNKLOLJJPK
AEFBJLBGMHPKNJAAIFHNEAIGGK
AAPHBAJICEDDGCKHCJKIMKEPFK
AEKFAMPDDIEAIJBGFMDEEGMKIK
DDDLLDLDDLLLLLLDLLLDDLDLDL
POSTNET - Enabled
POSTNET with B and B' -
Enabled
APCLGKHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKEGGHIK
AKCBPJCJGIIJCMCEHLOAGJGLLK
AEFBJLBGMHPLMJHEFHOFAMBEGK
AAPHBAJJDAHLGHEFHGLJCDLBBK
AHKFAPJAGBHAOEFOILFEADDKJK
DDDLLDLDDLLLLLLDDLLDDLDLDL
APCLGKHMHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJAKEAEEIK
AKCBPJCJGIIJCMCEGKNMMGNFNK
AEFBJLBGMHPLMOAAKCJJKKKFGK
AAPHBAJJCDDMDOOKJLPFELNDHK
AGKFAKIJKHEGEOBLCOCIIKELLK
DDDLLDLDDLLLLLLDLLLDDLDLDL
POSTNET and PLANET -
Enabled
POSTNET with B and B' and
PLANET - Enabled
APCLGKHMHNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALFFEGIK
AKCBPJCJGIIJCMCFHMJHEECHJK
AEFBJLBGMHPKNOHEHAABOGDHGK
AAPHBAJIDHHEDLAIMEOEKCCNDK
AFKFAJOKPOHGCDFDPJEIMPLLKK
DDDLLDLDDLLLLLLDDLLDDLDLDL
APCLGKGMHNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJAKEEFHIK
AKCBPJCJGIIJCMCFHNMFGLJLJK
AEFBJLBGMHPKNOBLDBLACNDGGK
AAPHBAJJDABIMJLFECPBEAKLBK
AFLFANKLDMHMMPBBAEMICMKLIK
DLDLLDLDLLDLLLLDLDLDDLDLDL
KIX Code - Enabled
Royal Mail Code (RM4SCC) -
Enabled
APCLGKGMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBFFIK
AKCBPJCJGIIJCMCEGLIOOJGJNK
AEFBJLBGMHPLMOGPODCIGBKEGK
AAPHBAJICEFAMMFHBNOAKJFFFK
AGLFAOMIGFEMKCFJNDKIGJFLJK
DLDLLDLDLLDLLLLDDDLDDLDLDL
APCLGKGMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHHGIK
AKCBPJCJGIIJCMCEHKLCEGNHLK
AEFBJLBGMHPLMJBLBGFEMHBFGK
AAPHBAJIDHBHJFPIPAKMMBDHDK
AHLFALNBKDHKAIBMHGNEOACKLK
DLDLLDLDLLDLLLLDLDLDDLDLDL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
CODE SELECTION
2D Symbologies
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
62
M
AXICODE
F
AMILY
Maxicode Mode 0 - Disabled Maxicode Mode 0 Enabled
APCPCKFOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGNMLNKJJNK
AEFBJLBGMHPKMPFNEDEGKHDEGK
AAPHBAJICBAJKABBHMMBCEFDDK
AELFANPINJGOIGDMLEEAIKCIKK
DLDLLDLDLLDLLLLDDDDDDLDLDL
APCPCKFOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFCEGIK
AKCBPJCJGIIJCMCEHMPHHFCHLK
AEFBJLBGMHPKMICJLGDKABIFGK
AAPHBAJIDCEOPJLOJBINEMDBFK
AFLFAIOBBPFICMHJBBDMADFJIK
DLDLLDLDLLDLLLLDLDDDDLDLDL
Maxicode Mode 1 - Disabled Maxicode Mode 1 - Enabled
APCPCKFMDNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKECGEIK
AKCBPJCJGIIJCMCEGKODPOAHPK
AEFBJLBGMHPKMOCJNEDEFFMEGK
AAPHBAJJCFEFPJNKBKBLBJODHK
AFLFAPPGCADAMPPLENLIKLPLLK
DDDLLDLDDDLLLLLDDLDDDLDLLL
APCPCKFMDNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEEEHIK
AKCBPJCJGIIJCMCEHLNPFBLJJK
AEFBJLBGMHPKMJFNCBEIPDHFGK
AAPHBAJJDGACKAHFPHFHHBIBBK
AELFAKOPOGAGGFLOOIMECCIKJK
DDDLLDLDDDLLLLLDLLDDDLDLLL
Maxicode Mode 2 - Disabled Maxicode Mode 2 - Enabled
APCPCKFMBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFHGEIK
AKCBPJCJGIIJCMCFHJKFCBNFLK
AEFBJLBGMHPKMMBBPOMKBOFGGK
AAPHBAJJDFAFDANHPNDEHNFFBK
AELFAPNMEIIIKNEIOJGMGOIJLK
DLDLLDLDLLLLLLLDLLLDDLDLLL
APCPCKFMBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFBEHIK
AKCBPJCJGIIJCMCFGIJJIOGLNK
AEFBJLBGMHPKMLGFALLGLIOHGK
AAPHBAJJCGECGJHIBAHIBFDHHK
AFLFAKMFIOLOAHANEMBAOHPIJK
DLDLLDLDLLLLLLLDDLLDDLDLLL
Maxicode Mode 3 - Disabled Maxicode Mode 3 - Enabled
APCPCKHKHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEFBGIK
AKCBPJCJGIIJCMCFGJINMMPLJK
AEFBJLBGMHPKMPHJJGCHCNFFGK
AAPHBAJJCFBENOJCIIMFBFDLFK
AGLFAMNNLJDOOBHNMIJIGENJIK
DDLLLDLDDLLLLLLDDLDDDLDLLL
APCPCKHKHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDDFIK
AKCBPJCJGIIJCMCFHILBGDEFPK
AEFBJLBGMHPKMIANGDFLILOEGK
AAPHBAJJDGFDIHDNGFIJHNFJDK
AHLFAJMEHPAIELDIGNOEONKIKK
DDLLLDLDDLLLLLLDLLDDDLDLLL
Maxicode Mode 4 - Disabled Maxicode Mode 4 - Enabled
APCPCKHKFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFABGIK
AKCBPJCJGIIJCMCEHKMLBDCJNK
AEFBJLBGMHPKMNEBLMNJGGMHGK
AAPHBAJJDFFEBHJPGPOKHBINDK
AHLFAMPHNBIGIDMOGMEMKBKLIK
DLLLLDLDLDLLLLLDLLLDDLDLLL
APCPCKHKFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFGDFIK
AKCBPJCJGIIJCMCEGLPHLMJHLK
AEFBJLBGMHPKMKDFEJKFMAHGGK
AAPHBAJJCGBDEODAICKGBJOPFK
AGLFAJOOBHLACJILMJDACINKKK
DLLLLDLDLDLLLLLDDLLDDLDLLL
Maxicode Mode 5 - Disabled Maxicode Mode 5 - Enabled
APCPCKHIHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEGBHIK
AKCBPJCJGIIJCMCEHNODDHLHPK
AEFBJLBGMHPKMMDFCLKLJEDHGK
AAPHBAJIDBBIEOFEAJDAEMDNHK
AGLFAOPJCINIMKAJJFLEIAHIJK
DDLLLDLDDLDLLLLDLDLDDLDLDL
APCPCKHIHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEADEIK
AKCBPJCJGIIJCMCEGMNPJIAJJK
AEFBJLBGMHPKMLEBNONHDCIGGK
AAPHBAJICCFPBHPLOEHMCEFPBK
AHLFALOAOOOOGAEMDAMIAJAJLK
DDLLLDLDDLDLLLLDDDLDDLDLDL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
CODE SELECTION
2D Symbologies
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
63
Maxicode Mode 6 - Disabled Maxicode Mode 6 - Enabled
APCPCKHIFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDBHIK
AKCBPJCJGIIJCMCFGOKFOIGFLK
AEFBJLBGMHPKMOANABFFNPKFGK
AAPHBAJICBFIIHFJOOBPCIILBK
AHLFAONDEAGAKILKDBGAEFAKJK
DLLLLDLDLDDLLLLDDDDDDLDLDL
APCPCKHIFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFDEIK
AKCBPJCJGIIJCMCFHPJJEHNLNK
AEFBJLBGMHPKMJHJPECJHJBEGK
AAPHBAJIDCBPNOPGADFDEAOJHK
AGLFALMKIGFGACPPJEBMMMHLLK
DLLLLDLDLDDLLLLDLDDDDLDLDL
C
OMPOSITE
C
ODES
NOTE
Before enabling this symbology, it is necessary to enable the linear
barcode family (among RSS, EAN128 or UPC/EAN) contained in the
composite code to be read.
Disabled Enabled
APCLCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECFFIK
AKCBPJCJGIIJCMCEHKOEFLPLJK
AEFBJLBGMHPKMNANDPFEOHDHGK
AAPHBAJJDHCDFAKBDAJOKCMDFK
AGLFAKMMLANGANCAEKMKANPLKK
DLDLLDLDLDDLLLLDLLLDDLDLDL
APCLCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEEHGIK
AKCBPJCJGIIJCMCEGLNIPEEFPK
AEFBJLBGMHPKMKHJMKCIEBIGGK
AAPHBAJJCEGEAJAONNNCMKKBDK
AHLFAPNFHGOAKHGFOPLGIEIKIK
DLDLLDLDLDDLLLLDDLLDDLDLDL
Keep Linear Part Discard Linear Part
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHFFIK
AKCBPJCJGIIJCMCFGJKCIECJNK
AEFBJLBGMHPKMPDFBFKKKMKFGK
AAPHBAJJCHGDJJKMNHLBMGHFDK
AHLFAKOGNIGOGPJDOOBOMIIJKK
DDDLLDLDDLDLLLLDDLDDDLDLDL
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBHGIK
AKCBPJCJGIIJCMCFHIJOCLJHLK
AEFBJLBGMHPKMIEBOANGAKBEGK
AAPHBAJJDECEMAADDKPNKOBHFK
AGLFAPPPBOFIMFNGELGCEBPIIK
DDDLLDLDDLDLLLLDLLDDDLDLDL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
READING
PARAMETERS
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
64
READING PARAMETERS
T
RIGGER
M
ODE
Trigger Level Trigger Pulse
APCOCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEAGGIK
AKCBPJCJGIIJCMCFGILHGJEHJK
AEFBJLBGMHPLNJAKKIEPNIOFGK
AAPHBAJJCAHEBANDBIMIMMMLBK
AEKFALNAJKBEGAIEALHCAKNIJK
DLLLLLLDLLLLLLLDDLLDDLDLDL
APCOCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGEFIK
AKCBPJCJGIIJCMCFHJILMGPJPK
AEFBJLBGMHPLNOHOFNDDHOFEGK
AAPHBAJJDDDDEJHMPFIEKEKJHK
AFKFAOMJFMCCMKMBKOAOIDKJLK
DLLLLLLDLLLLLLLDLLLDDLDLDL
T
RIGGER
T
YPE
Normal Trigger Software Trigger
APCOCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCEHLPBLGJFNK
AEFBJLBGMHPLNLDCICLBJDHHGK
AAPHBAJJDADENJNOPPOHKIHNHK
AFKFALPKPCKMACDHKPKGMPKKJK
DDLLLLLDDDLLLLLDLLDDDLDLDL
APCOCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDEFIK
AKCBPJCJGIIJCMCEGKMNBJCLLK
AEFBJLBGMHPLNMEGHHMNDFMGGK
AAPHBAJJCDHDIAHBBCKLMABPBK
AEKFAOODDEJKKIHCAKNKEGNLLK
DDLLLLLDDDLLLLLDDLDDDLDLDL
F
LASH
M
ODE
Flash ON Duration
APCKBLDKFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFBEFIK
AKCBPJCJGIIJCMCEHLIMMGBPLK
AEFBJLBGMHPLMKDCNBIMCELEGK
AAPHBAJIDCENBFNMNPOPKPPLBK
AGKFAMNAGIEEEEGBLADKIBMJJK
DDDLLLLLLDLLLLLDLLLDDLDLDL
Read a number in the range
01-99, which corresponds to a
max 9.9 seconds duration.
Flash OFF Duration
APCKBLDIHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEHEEIK
AKCBPJCJGIIJCMCEHMKEOCIBJK
AEFBJLBGMHPLMLEGEGPONGEEGK
AAPHBAJJDGABEMBHLJDFJCELFK
AHKFAONOJBBKANKGEJMCKABKIK
DLDLLLLLDLDLLLLDLDLDDLDLLL
Read a number in the range
01-99, which corresponds to a
max 9.9 seconds duration.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
READING
PARAMETERS
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
65
B
EEPER
T
ONE
Tone 1 Tone 2
APDNCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFDDFIK
AKCBPJCJGIIJCMCEGLNHEOKPJK
AEFBJLBGMHPLNIDKIIGKFCEEGK
AAPHBAJJDHAGBIKHCMHKLKKHHK
AHKFALKEEGHAIGJCOHOKIKDJIK
DLDLLLLDDDLLLLLDLDLDDLDLDL
APDNCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEGDHIK
AKCBPJCJGIIJCMCFHNJMMMFNNK
AEFBJLBGMHPKMIEOFKPCBONGGK
AAPHBAJICDEOBNEFHDGLFDFJDK
AEKFAIMHBPEAOLNKDAIKMPMJJK
DLDLLLLDDDLLLLLDDDLDDLDLDL
Tone 3 Tone 4
APDNCKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALECEGIK
AKCBPJCJGIIJCMCFGINNKHCJLK
AEFBJLBGMHPLNMHHMDKAIKJHGK
AAPHBAJICDHAICDBALPPCCIJDK
AHLFAJLJCHBCECMGKCCCMNKLIK
DLLLLLLDDDLLLLLDDDDDDLDLLL
APDNCKHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKFHEEIK
AKCBPJCJGIIJCMCEHOJGCFNLPK
AEFBJLBGMHPKMMADBBDIMGAFGK
AAPHBAJJDHDIIHNDFEOOMLHHHK
AELFAKNKHOCCCPIOHFECIIFLJK
DLLLLLLDDDLLLLLDLDDDDLDLLL
B
EEPER
V
OLUME
Beeper OFF Low Volume
APDNCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEABGIK
AKCBPJCJGIIJCMCFGJKNDOMDLK
AEFBJLBGMHPLNNHGFHOILPGHGK
AAPHBAJJDEABIIAFCGBJLGHDHK
AHKFAOJHOIPOEOGEOGECMGDKKK
DDDLLLLDLLLLLLLDLDDDDLDLDL
APDNCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEGDFIK
AKCBPJCJGIIJCMCFHIJBJBHNNK
AEFBJLBGMHPLNKACKCJEBJNGGK
AAPHBAJJCHEGNBKKMLFFNOBBBK
AGKFALIOCOMIOECBEDDOEPELIK
DDDLLLLDLLLLLLLDDDDDDLDLDL
Medium Volume High Volume
APDNCKHMFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFDDHIK
AKCBPJCJGIIJCMCEGONKBDIPJK
AEFBJLBGMHPKMKHGHAAMFFEEGK
AAPHBAJIDDAONEEIJEEEDHOPFK
AFKFAIONHHPIIJGJJEFOAKLLJK
DDDLLLLDLLLLLLLDLDDDDLDLDL
APDNCKHMFNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALFHEGIK
AKCBPJCJGIIJCMCEHLJLHIPLPK
AEFBJLBGMHPLNOEPOJFOMBAFGK
AAPHBAJIDDDAELDMOMNAEGDPFK
AGLFAJJDEPKKCAHFAGPGAINJIK
DDLLLLLDLLLLLLLDLDLDDLDLLL
B
EEPER
D
URATION
Beeper Duration
APDNBLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFGHFIK
AKCBPJCJGIIJCMCFHIJFOJBHPK
AEFBJLBGMHPLMODMKFFCNOOGGK
AAPHBAJICDCBDKPCMIDFNDBHHK
AGLFAPOONLIKCKDOGKHIEOGILK
DLLLLLLDLDLLLLLDDLLDDLDLDL
Read a number in the range
01-99, which corresponds to a
max 99 ms duration.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
READING
PARAMETERS
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
66
R
EADS PER
C
YCLE
One Read per Cycle Multiple Reads per Cycle
APCKGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFDEFIK
AKCBPJCJGIIJCMCFGJNDOMLHLK
AEFBJLBGMHPKMOHPOFEFHMIEGK
AAPHBAJICFEKOCAJIEEBNCHBFK
AHLFAJNJFFJIOIFDILIAIBCLKK
DLDLLLLDDLLLLLLDLDLDDLDLDL
APCKGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHIOPEDAJNK
AEFBJLBGMHPKMJALBADJNKDFGK
AAPHBAJIDGANLLKGGJANLKBDDK
AGLFAMMAJDKOECBGCOPMAIFKIK
DLDLLLLDDLLLLLLDDDLDDLDLDL
S
CAN
T
IMEOUT
Define Timeout
APCKBPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFBFIK
AKCBPJCJGIIJCMCEGPJJEPGJPK
AEFBJLBGMHPKNPDDECLBFAIEGK
AAPHBAJJCBAMPCACDANOIIBHDK
AGLFAJNBKGHKIIKPNCNOOEGLKK
DDDLLLLDDLLLLLLDLLLDDLDLDL
Read a number in the range
01-99, which corresponds to a
max 99 seconds duration. The
timeout is activated when the
decoding fails.
A
IMING
S
YSTEM
D
ELAY
Disable Enable Short
APCKFLHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDAHIK
AKCBPJCJGIIJCMCFHLLFEDANPK
AEFBJLBGMHPLNKFJJDAOBCHGGK
AAPHBAJIDBCAJHMPIMFJGHPPBK
AFLFAMICPKJMEOBLKLLCKGHIIK
DDDLLDLDDLDLLLLDDDDDDLDLDL
APCKFLHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALEHHGIK
AKCBPJCJGIIJCMCFGOPECIHJJK
AEFBJLBGMHPKMOGAAKFMIGDHGK
AAPHBAJIDBBOAILLPEMNBGCPBK
AGKFANPMMCMOOHAHDJBKKEBKJK
DDLLLDLDDLDLLLLDDDLDDLDLLL
Enable Medium Enable Long
APCKFLGMHNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJALEFEGIK
AKCBPJCJGIIJCMCEGINBCKIJLK
AEFBJLBGMHPLNJAPGMAJKHBFGK
AAPHBAJIDBHNKGELMAIFHFDFBK
AELFAPMHJPMCMMEILGIGILILIK
DLLLLDLDLLLLLLLDLLLDDLDLLL
APCKFLGMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKEHBEIK
AKCBPJCJGIIJCMCEGMKMOOEDLK
AEFBJLBGMHPKMKECAACHJFOFGK
AAPHBAJICCAEGAJAFFFNGMIHHK
AGKFALKAGBKGMPBBIBFCAAJILK
DLDLLDLDLLLLLLLDDLDDDLDLDL
G
OOD
R
EAD
S
POT
Disable Enable Short
APCOCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHFHIK
AKCBPJCJGIIJCMCFGKKAEDJHLK
AEFBJLBGMHPLMNBODJGILAEEGK
AAPHBAJICBEKCEPPLMKNKJGFFK
AHKFAILCIGOKGPMMHEJCKLILIK
DLDLLDLDLDDLLLLDDDDDDLDLDL
APCOCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBHEIK
AKCBPJCJGIIJCMCFHLJMOMCJNK
AEFBJLBGMHPLMKGKMMBEBGPFGK
AAPHBAJIDCANHNFAFBOBMBAHDK
AGKFANKLEANMMFIJNBOOCCPKKK
DLDLLDLDLDDLLLLDLDDDDLDLDL
Enable Medium Enable Long
APCOCOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEEHGIK
AKCBPJCJGIIJCMCEGNNHGONLJK
AEFBJLBGMHPKNKBOBOIMFKGHGK
AAPHBAJJCGEFHILCAOPACIPJHK
AFKFAOMIBJOMKIMBAGIOGHAKLK
DLDLLDLDLDDLLLLDDDDDDLDLDL
APCOCOHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEAAHIK
AKCBPJCJGIIJCMCEHIJGAFKPPK
AEFBJLBGMHPLMOCHIHNOMOCGGK
AAPHBAJJCGHLOHMGHGGEFJCJHK
AGLFAPLGCBLOABNNJECGGFGIKK
DLLLLDLDLDDLLLLDDDLDDLDLLL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
READING
PARAMETERS
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
67
User Defined Beeper
U
SER
D
EFINED
B
EEPER
T
ONE
Tone 1 Tone 2
APDNCKFOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHJNMMMPPLK
AEFBJLBGMHPLMNAINJLLMGBGGK
AAPHBAJJDAEBELGEKFDGBNGFDK
AELFALOOKJCEGIBDMEMEOCPJJK
DDDLLLLDLDDLLLLDDDLDDLDLLL
APDNCKFOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEAGEIK
AKCBPJCJGIIJCMCEGPJHEOANPK
AEFBJLBGMHPKNNHMALCDIKIEGK
AAPHBAJICEAJEOIGPKCHPEJLHK
AHLFAIINPABEAFFLBDKEKHAJIK
DDDLLLLDLDDLLLLDLDLDDLDLLL
Tone 3 Tone 4
APDNCKFOFNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKEEBFIK
AKCBPJCJGIIJCMCEHKNGCFHJJK
AEFBJLBGMHPLMJEFJCHBBOMFGK
AAPHBAJICEDHNBPCICLDIFELHK
AEKFAJPDMIEGKMEHIBAMKFGLJK
DDLLLLLDLDDLLLLDLDDDDLDLDL
APDNCKFOFNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALFBBHIK
AKCBPJCJGIIJCMCFGMJNKHILNK
AEFBJLBGMHPKNJDBEAOJFCFHGK
AAPHBAJJDAHPNEBANNKCGMLFDK
AHKFAKJAJBHGMBAPFGGMOAJLIK
DDLLLLLDLDDLLLLDDDDDDLDLDL
U
SER
D
EFINED
B
EEPER
V
OLUME
Beeper OFF Low Volume
APDNCKFMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEFEEIK
AKCBPJCJGIIJCMCFGPMIEHNPPK
AEFBJLBGMHPLMLAILLLFJCFHGK
AAPHBAJICHEKELAACOKAEILHBK
AELFAMPJJGEMILJBJIEAEKFLKK
DLDLLLLDDLLLLLLDLLLDDLDLDL
APDNCKFMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEDGHIK
AKCBPJCJGIIJCMCFHOPEOIGBJK
AEFBJLBGMHPLMMHMEOMJDEOGGK
AAPHBAJIDEANBCKPMDOMCANFHK
AFLFAJOAFAHKCBNEDNDMMDCKIK
DLDLLLLDDLLLLLLDDLLDDLDLDL
Medium Volume High Volume
APDNCKFMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFGGFIK
AKCBPJCJGIIJCMCEGILPGKJDNK
AEFBJLBGMHPKNMAIJMFBHIHEGK
AAPHBAJJCAEFBHENJMPNMJCLDK
AGLFAKIDAJEKEMJMOKFMIGNKJK
DLDLLLLDDLLLLLLDLLLDDLDLDL
APDNCKFMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALFCBEIK
AKCBPJCJGIIJCMCEHNPOABOHLK
AEFBJLBGMHPLMIDBAFADOMDFGK
AAPHBAJJCAHLIIDJOEGJLIPLDK
AFKFALPNDBBIOFIAHIPEIELIIK
DLLLLLLDDLLLLLLDLLDDDLDLLL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
READING
PARAMETERS
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
68
U
SER
D
EFINED
B
EEPER
D
URATION
Set Duration
APDNBLFMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEAHEIK
AKCBPJCJGIIJCMCFHPLNMNIJNK
AEFBJLBGMHPLMPEIDCCACMBGGK
AAPHBAJJCHGNGDDJKOOPOOKHDK
AHLFANOACCNEGDPJJDIAGPLLKK
DDLLLLLDDLDLLLLDDDLDDLDLLL
Read a number in the range
01-99, which corresponds to a
max 990 ms duration.
T
EST
U
SER
D
EFINED
B
EEPER
The following command carries out its specific function and does not require reading
the Enter or Exit and Save Configuration codes.
Test User Defined Beeper
AMHOHNGODNGNENEIEPANHOGOCK
AHPHKJIMDKEOFMHMLJAKFEFGJK
AKCBPJCJGIIJCMCEGLLMFFCNLK
AEFBJLBGMHPLMKFGLMPMEBIEGK
AAPHBAJIDFHCJCKKJOFFLOMLDK
AHKFAOLIHAMCMHFJDPCCOPEKKK
DDDLLLLDLLLLLLLDDLDDDLDLDL
See par. 9.1.2 for details.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
READING
PARAMETERS
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
69
Code Ordering and Selection
C
ODES PER
S
CAN
One Code per Scan All Codes per Scan
APCKGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEGEFIK
AKCBPJCJGIIJCMCEHKJFDDGFPK
AEFBJLBGMHPKMMEHMPLLDHBGGK
AAPHBAJIDFAKCLAEGDGOLGMHDK
AGLFAJPDDNCAIKOACPFEEEFJKK
DDDLLLLDLDLLLLLDDDDDDLDLDL
APCKGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEAGGIK
AKCBPJCJGIIJCMCEGLKJJMNLJK
AEFBJLBGMHPKMLDDDKMHJBKHGK
AAPHBAJICGENHCKLIOCCNOKFFK
AHLFAMOKPLBGCAKFIKCIMNCIIK
DDDLLLLDLDLLLLLDLDDDDLDLDL
C
ENTRAL
C
ODE
T
RANSMISSION
The following command is available when working in "one code per scan".
Disabled Enabled
APBPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEHGEIK
AKCBPJCJGIIJCMCEGNNCGFELLK
AEFBJLBGMHPKMIBIIDEEJMGEGK
AAPHBAJICCEGCICHCIIKAKHBBK
AGKFAKIIPDMIAKGAKBKGGBCIJK
DLDLLLLDDDDLLLLDLLLDDLDLLL
APBPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEBEHIK
AKCBPJCJGIIJCMCEHMOOMKPFNK
AEFBJLBGMHPKMPGMHGDIDKNFGK
AAPHBAJIDBABHBIIMFMGGCBDHK
AHKFAPJBDFPOKACFAENKOIFJLK
DLDLLLLDDDDLLLLDDLLDDLDLLL
See par. 3.6 for details.
O
RDER
B
Y
C
ODE
L
ENGTH
The following command is available when working in "all codes per scan".
Disabled Enabled - Increasing Order
APBPCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCFHOJELKJJPK
AEFBJLBGMHPKMKCAKJLKNHPGGK
AAPHBAJIDCAGOBCKMPKFGOMHHK
AHKFAKKCJLHAGINDAFHCKEFKJK
DDDLLLLDLLDLLLLDDLDDDLDLLL
APBPCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFEEHIK
AKCBPJCJGIIJCMCFGPKIBFCHJK
AEFBJLBGMHPKMNFEFMMGHBEHGK
AAPHBAJICBEBLIIFCCOJAGKFBK
AGKFAPLLFNEGMCJGKAAOCNCLLK
DDDLLLLDLLDLLLLDLLDDDLDLLL
Enabled - Decreasing Order
APBPCOHMFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEBEFIK
AKCBPJCJGIIJCMCEHJODJHNFNK
AEFBJLBGMHPLNNCAIOFODNNFGK
AAPHBAJJDFAJLNGHHNPIOPFLFK
AFKFAMNIAEHGKPNOHHGOGINLKK
DDDLLLLDLLDLLLLDDLDDDLDLLL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
READING
PARAMETERS
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
70
O
RDER
B
Y
C
ODE
S
YMBOLOGY
The following command is available when working in "all codes per scan".
Set Order
APBPBPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEEAHIK
AKCBPJCJGIIJCMCFGPKMGNENLK
AEFBJLBGMHPKNJGKFLAALGHHGK
AAPHBAJJCFCGFDNNCBIJALKDHK
AGLFALNLKIAEAMIJIJEICMAIIK
DLLLLLLDLDDLLLLDLDLDDLDLLL
1. Select the number of codes
in the range 0-9.
2. Select the Datalogic
Standard Code Identifier for
each above defined code
from the table in Appendix
C.
See par. 3.6 for details.
Autoscan
A
UTOSCAN
M
ODE
Disabled Enabled in Normal Mode
APCOCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECAEIK
AKCBPJCJGIIJCMCEGPNABHKFLK
AEFBJLBGMHPLNJHNAJCHKOEEGK
AAPHBAJICFAOBPKAGOMHCEGBBK
AFLFAPPLOJIOMMBKLFDGKJIJKK
DLDLLLLDDLDLLLLDLDLDDLDLLL
APCOCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEECHIK
AKCBPJCJGIIJCMCEHOOMLIBLNK
AEFBJLBGMHPLNOAJPMFLAIPFGK
AAPHBAJIDGEJEGAPIDILEMADHK
AELFAKOCCPLIGGFPBAEKCAPIIK
DLDLLLLDDLDLLLLDDDLDDLDLLL
Enabled in Pattern Mode
APCOCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFBCFIK
AKCBPJCJGIIJCMCFGIKHDKOJJK
AEFBJLBGMHPKMOHNCOMDEEGHGK
AAPHBAJJCCABEDONNMJKKFPNDK
AHLFAJIBHGIIALBHMHCKGFAIJK
DLDLLLLDDLDLLLLDLDLDDLDLLL
See par. 3.4 for details.
A
UTOSCAN
A
IMING
S
YSTEM
Disabled Enabled
APCOCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHAEIK
AKCBPJCJGIIJCMCFHMJGMIHHPK
AEFBJLBGMHPLNLEFCDNJOFNGGK
AAPHBAJIDFEONGKNIJOIEANHHK
AELFAPNBIBDGKOKJBBOCGMPLKK
DDDLLLLDLDDLLLLDDDDDDLDLLL
APCOCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBCHIK
AKCBPJCJGIIJCMCFGNKKGHMJJK
AEFBJLBGMHPLNMDBNGKFEDGHGK
AAPHBAJICGAJIPACGEKECILFBK
AFLFAKMIEHAAAEOMLEJOOFIKIK
DDDLLLLDLDDLLLLDLDDDDLDLLL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
READING
PARAMETERS
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
71
A
UTOSCAN
H
ARDWARE
T
RIGGER
Disabled Enabled
APCOCKFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFBFHIK
AKCBPJCJGIIJCMCEGOJNEKCHNK
AEFBJLBGMHPLMOHHHCAIHBIEGK
AAPHBAJIDCAJIFGOAAKEOHBFDK
AHKFAPJLGOGCEACIDCMMAEDLLK
DLDLLLLDDDLLLLLDLDDDDLDLDL
APCOCKFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFHHEIK
AKCBPJCJGIIJCMCEHPKBOFJJLK
AEFBJLBGMHPLMJADIHHENHDFGK
AAPHBAJICBEONMMBONOIIPHHFK
AGKFAKICKIFEOKGNJHLAINEKJK
DLDLLLLDDDLLLLLDDDDDDLDLDL
A
UTOSCAN
I
LLUMINATION
S
YSTEM
Disabled Enabled
APCOCKFOFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEEFHIK
AKCBPJCJGIIJCMCFHNNLJFPFJK
AEFBJLBGMHPLMMEPFIPGDKBGGK
AAPHBAJICCEJEMGDOHILIDKDFK
AGKFAPLBAGNKCCJLJGBIMBEJLK
DDDLLLLDLLLLLLLDDDLDDLDLDL
APCOCKFOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECHEIK
AKCBPJCJGIIJCMCFGMOHDKELPK
AEFBJLBGMHPLMLDLKNIKJMKHGK
AAPHBAJIDBAOBFMMAKMHOLMBDK
AHKFAKKIMAOMIINODDGEEIDIJK
DDDLLLLDLLLLLLLDLDLDDLDLDL
NOTE
The following commands can be activated only when One Code per
Scan is enabled.
S
AFETY
T
IME
Disabled Enabled
APCOGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBDHIK
AKCBPJCJGIIJCMCFGPNJLFMNJK
AEFBJLBGMHPLNKCKDNPHGJJHGK
AAPHBAJIDFGLNFMAGPFCDBKFHK
AEKFAJIJKJCIIFOLICNICOFJIK
DDLLLDLDDLLLLLLDDDLDDLDLLL
APCOGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHBEIK
AKCBPJCJGIIJCMCFHOOFBKHDPK
AEFBJLBGMHPLNNFOMIILMPCGGK
AAPHBAJICGCMIMGPICBOFJMHBK
AFKFAMJAGPBOCPKOCHKEKHCIKK
DDLLLDLDDLLLLLLDLDLDDLDLLL
Valid only with software trigger or
autoscan enabled.
See par. 6.4.1 for details.
S
AFETY
T
IME
D
URATION
Set Duration
APCOFPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFEAHIK
AKCBPJCJGIIJCMCFHPKMDPJLLK
AEFBJLBGMHPLNOGKLEGCNHNGGK
AAPHBAJJDFEMPNPJOPBNJHLFFK
AHKFAIJABNLAGNIDIJBIALLJIK
DLDLLDLDDLDLLLLDLLLDDLDLDL
Read a number in the range
01-99, where 01 corresponds to
100 ms and 99 to 9.9 seconds.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
READING
PARAMETERS
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
72
S
TAND
A
UTOSCAN
M
ODE
Disable Normal
APCOCKFMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFCFGIK
AKCBPJCJGIIJCMCFHKPDLBGLLK
AEFBJLBGMHPLMNDLMPIEMIOGGK
AAPHBAJJCGAFBFKIIBFBLOBDBK
AHKFANLPPPIEGLFMGPOAOAJKKK
DLDLLLLDDDDLLLLDDLLDDLDLLL
APCOCKFMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFEHFIK
AKCBPJCJGIIJCMCFGLMPBONFNK
AEFBJLBGMHPLMKEPDKPIGOFHGK
AAPHBAJJDFECEMAHGMBNNGHBHK
AGKFAIKGDJLCMBBJMKJMGJOLIK
DLDLLLLDDDDLLLLDLLLDDLDLLL
Pattern
APCOCKFMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEBHHIK
AKCBPJCJGIIJCMCEHNIEJMCHJK
AEFBJLBGMHPKNKDLOIGACCMFGK
AAPHBAJICBAKEJOFDDAMDPIPDK
AFKFALMFGAICKMFBBNPMCMBLJK
DLDLLLLDDDDLLLLDDLLDDLDLLL
Enter Cradle Configuration Exit and Save Cradle Configuration
AOAIGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFAGHIK
AKCBPJCJGIIJCMCEGMNGOBKBJK
AEFBJLBGMHPLMPEEEJKEBPIHGK
AAPHBAJJCHEGKKELMEFNPDJFFK
AHLFBINLDNIMKHJDEHLCADAJLK
DDDDLDDLLDDLLLLDDDDDDLDLDL
CAPTURE IMAGE
AOAICMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFGAHIK
AKCBPJCJGIIJCMCEGJKPBHPLLK
AEFBJLBGMHPLNIHAENDLMGFEGK
AAPHBAJJDDGHFLHEBHKCGLFFHK
AELFBJOABCEOENLELBPIIGNLLK
DLLDLDDLDLLLLLLDDDLDDLDLLL
73
CAPTURE IMAGE
In order to capture an image, you should read one of these codes (for further details
see par. 3.3), then point at the image subject and pull the trigger. The image will be
captured and sent to the host PC according to the Preset Configuration.
Capture Image using Preset 1 Capture Image using Preset 2
AMHOHNBOHNGNENEIEPANHOGOCK
AHLLMBIMDKEOFMHMLJAKEAGHJK
AKCBPJCJGIIJCMCFGNOHPCPFPK
AEFBJLBGMHPKMJAIMKEHDCDFGK
AAPHBAJICFDBLOPJLLLDINFJHK
AGLFAMIDGOMEEPCBGGNAIGCKIK
DLDLLLLLDDLLLLLDLLDDDLDLLL
AMHOHNBOHNGNENEIEPANHOGOCK
AHLJOBIMDKEOFMHMLJALEBAHJK
AKCBPJCJGIIJCMCEGKLDJDCHNK
AEFBJLBGMHPLMMDJHFAKOIPGGK
AAPHBAJIDEFNILIMEJKHDCCJHK
AEKFAPIEJAFCCKBLOMCOGKEJLK
DDDLLLLLDLDLLLLDDDDDDLDLDL
Capture Image using Preset 3 Capture Image using Preset 4
AMHOHNBOHNGNENEIEPANHOGOCK
AHLJMBIMDKEOFMHMLJAKEEHGJK
AKCBPJCJGIIJCMCEHMJAAMGPPK
AEFBJLBGMHPLNJAFIAEKDLGHGK
AAPHBAJIDBCENNFBMABFEPANDK
AHLFAPLLBHMECODCDJBCENMLLK
DLDLLLLLDLLLLLLDDLDDDLDLDL
AMHOHNBOHNGNENEIEPANHOGOCK
AHJLOBIMDKEOFMHMLJALEHAFJK
AKCBPJCJGIIJCMCEGMPKJGGNLK
AEFBJLBGMHPLNMCMJLMHOEAGGK
AAPHBAJJDCFDMMNDJIGDNFCBDK
AHKFAPPKGLEEMKLOEBLAEPPKIK
DDLLLLLLDDLLLLLDLDDDDLDLDL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
74
ADVANCED IMAGE
CAPTURE
Image Preset 1
Basic Configuration
I
MAGE
F
ORMAT
–
PRESET
1
Bitmap Format JPEG Format
APCNCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEFAEIK
AKCBPJCJGIIJCMCEHOOCMJLDJK
AEFBJLBGMHPLMNCFCEBDHHFHGK
AAPHBAJICBHPNEJAFAJAHHBBFK
AGKFAPKDLHDGKLOGIOPCIANLIK
DDDLLLLDLDLLLLLDLLDDDLDLLL
APCNCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDCHIK
AKCBPJCJGIIJCMCEGPNOGGANPK
AEFBJLBGMHPLMKFBNBGPNBOGGK
AAPHBAJIDCDIINDPLNNMBPHDDK
AHKFAKLKHBAAABKDCLIOAJKKKK
DDDLLLLDLDLLLLLDDLDDDLDLLL
TIFF Format
APCNCOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFGCFIK
AKCBPJCJGIIJCMCFHJJFOEPPLK
AEFBJLBGMHPKNKCFADPHJNHEGK
AAPHBAJJCGHAIINNOCMNPGINHK
AEKFAJNJCIDAGMOLPMOOEMFKLK
DDDLLLLDLDLLLLLDLLDDDLDLLL
R
ESOLUTION
–
PRESET
1
Full Resolution (640 x 480) Quarter Resolution (320 x 240)
APCNCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFAAEIK
AKCBPJCJGIIJCMCFGNKEBGGBNK
AEFBJLBGMHPLMPBNAOONDMMFGK
AAPHBAJIDBDPBNJNLHLPBDKHDK
AHKFAPIJNPIOMJFFCKCGEFKJIK
DLDLLLLDDLLLLLLDDLLDDLDLLL
APCNCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFGCHIK
AKCBPJCJGIIJCMCFHMJILJNPLK
AEFBJLBGMHPLMIGJPLJBJKHEGK
AAPHBAJICCHIEEDCFKPDHLMFFK
AGKFAKJABJLIGDBAIPFKMMNIKK
DLDLLLLDDLLLLLLDLLLDDLDLLL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
75
JPEG
Q
UALITY
F
ACTOR
–
PRESET
1
JPEG Quality Factor
APCNBPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEGGHIK
AKCBPJCJGIIJCMCFHMJMMBLFJK
AEFBJLBGMHPLNMFHPMFHFNEEGK
AAPHBAJJCGBPKPGKFJJDHGMDDK
AGLFAOPAOMPKKNAPKGBMMNPLJK
DDLLLLLDDDLLLLLDLDDDDLDLLL
Set the JPEG compression level
in the range 000-100.
Advanced Configuration
W
INDOW
D
IMENSIONS
–
PRESET
1
Origin along X Axis
APCNBPHMDNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFABEIK
AKCBPJCJGIIJCMCEHMOIOMKPJK
AEFBJLBGMHPKNMHOODCOCLGHGK
AAPHBAJJDBGKJFDCLNJFBCJPFK
AFKFAKNMANLECGFAIKPKIBHLKK
DDLLLLLDLLDLLLLDDDLDDLDLDL
Read a number in the range
0-630
Origin along Y Axis
APCNBPFOBNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFGEHIK
AKCBPJCJGIIJCMCFGOODGOPPLK
AEFBJLBGMHPKMJEMLCPPLPDFGK
AAPHBAJJDGCNMGPBDENJLFFNBK
AGLFAKJGOCOAMINBKJNEOJLLLK
DLLLLLLDDLLLLLLDLDLDDLDLLL
Read a number in the range
0-470
Width
APCNBPFMDNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEAEGIK
AKCBPJCJGIIJCMCFGJMLEKGBJK
AEFBJLBGMHPKMIDICFINENMFGK
AAPHBAJIDCGBJPDKFCADIIONFK
AHLFAIJIBLLOIBBGFACMMIGIKK
DDLLLLLDLDDLLLLDLLLDDLDLDL
Read a number in the range
10-640
Height
APCNBPFMBNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFFEGIK
AKCBPJCJGIIJCMCEHKINJFLDNK
AEFBJLBGMHPKMKAAAPHDAGFHGK
AAPHBAJICCCBFGDHLFCMOMFLDK
AGLFAILCHDAGODKFPEPIANBKKK
DLLLLLLDDLDLLLLDDLDDDLDLDL
Read a number in the range
10-480
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
76
B
RIGHTNESS
–
PRESET
1
Increase
APCNCOHKHNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKFDCELK
ADPCPJCJGIIJCMCFHIPPHGLNOK
AIFBJLBGMHPLMJBELBBMIHELKK
AAPHBAJIDEFLCNGDNKIBEPHFDK
AHKFAKONFOAIGBMDPPNIMEPLJK
DLLLLLLDLLDLLLLDDDDDDLDLLL
Read a number in the range
0-100
Decrease
APCNCOHKHNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKFFAHLK
ADPCPJCJGIIJCMCFGJMDNJADIK
AIFBJLBGMHPLMOGAEEGACBPKKK
AAPHBAJICHBMHEMMDHMNCHBHFK
AGKFAPPEJIDOMLIGFKKEENIKLK
DLLLLLLDLLDLLLLDLDDDDLDLLL
Read a number in the range
0-100
C
ONTRAST
–
PRESET
1
Increase
APCNCOHKFNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKEAHGLK
ADPCPJCJGIIJCMCFHMJOMMJHKK
AMFBJLBGMHPKNMFIBIAGONHKKK
AAPHBAJJDFDKCBCCHIOFJIIFDK
AGLFAPKIGAIMKKMPLPCIEFKIJK
DDLLLLLDDDLLLLLDLDDDDLDLDL
Read a number in the range
0-100
Decrease
APCNCOHKFNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKEGFFLK
ADPCPJCJGIIJCMCFGNKCGDCJMK
AMFBJLBGMHPKNLCMONHKELMLKK
AAPHBAJJCGHNHIINJFKJPAOHFK
AHLFAKLBKGLKAAIKBKFEMMNJLK
DDLLLLLDDDLLLLLDDDDDDLDLDL
Read a number in the range
0-100
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
77
Z
OOM
–
PRESET
1
20% 40%
APCNCOHOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFGCFIK
AKCBPJCJGIIJCMCFHIPDJNLFNK
AEFBJLBGMHPKNLHCNHDHCMEEGK
AAPHBAJJCFEBCNMNLMCPONIJFK
AGKFAJOBCIMKOFEMNMBGEADKLK
DLDLLLLDLLDLLLLDDDDDDLDLDL
APCNCOHOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFAAGIK
AKCBPJCJGIIJCMCFGJMPDCALLK
AEFBJLBGMHPKNMAGCCELIKPFGK
AAPHBAJJDGAGHEGCFBGDIFOLDK
AHKFAMPIOOPMEPAJHJGKMJELJK
DLDLLLLDLLDLLLLDLDDDDLDLDL
60% 80%
APCNCOHOBNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEFAEIK
AKCBPJCJGIIJCMCEHPIELAPJPK
AEFBJLBGMHPLMMHCPANDMGGHGK
AAPHBAJICCEOHBIAAOHCGMBFHK
AEKFAPJLLHMMCCEBKOAKIMLLIK
DLDLLLLDLLDLLLLDDDDDDLDLDL
APCNCOHOBNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKEBHFIK
AKCBPJCJGIIJCMCEGKMFNLINJK
AEFBJLBGMHPKNIELGJIBFCCGGK
AAPHBAJICCHAOOPEHGOGBNMFHK
AHLFAOOFIPJOILFNDMKCIONJJK
DLLLLLLDLLDLLLLDDDLDDLDLLL
100% 120%
APCNCOHOBNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALFEHHIK
AKCBPJCJGIIJCMCFHMIOFJHPNK
AEFBJLBGMHPLMIDPLLBJBOLEGK
AAPHBAJJDGDIOLBGCJPHPEDLDK
AELFANIGNGKOOGBFOLMCMLCJIK
DLLLLLLDLLDLLLLDLDLDDLDLLL
APCNCOHOBNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJALFCFEIK
AKCBPJCJGIIJCMCFGNLCPGMBLK
AEFBJLBGMHPLMPELEOGFLIAFGK
AAPHBAJJCFHPLCLJMELLJMFJFK
AFLFAIJPBAJIEMFAEOLOECFIKK
DLLLLLLDLLDLLLLDDDLDDLDLLL
140% 160%
APCNCOHOBNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJAKEHFGIK
AKCBPJCJGIIJCMCEHLPJHEDDPK
AEFBJLBGMHPKNPDPJMPNPEJHGK
AAPHBAJIDBDHLHFLJLKKHFKHBK
AGLFALPMEJKICBBIJJNOAHKILK
DLLLLLLDLLDLLLLDLDLDDLDLLL
APCNCOGOBNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJALFGEHIK
AKCBPJCJGIIJCMCEHKKLFLIPPK
AEFBJLBGMHPKNPFANNEMDPJGGK
AAPHBAJJDGFLEFOGBNLPJHCBDK
AGKFAPLNILKCMNFKGEFOOELIJK
DDLLLLLDDLLLLLLDDLLDDLDLLL
180% 200%
APCNCOGOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEDEFIK
AKCBPJCJGIIJCMCFGMOANJHNLK
AEFBJLBGMHPLMPCEAPNEHDAEGK
AAPHBAJICCBDEAAEECKOHONPHK
AFKFAMNONCJCKABCLDDOKBEIIK
DDLLLLLDDLLLLLLDLLLDDLDLLL
APCNCOGOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEFGGIK
AKCBPJCJGIIJCMCFHNNMHGMDNK
AEFBJLBGMHPLMIFAPKKINFLFGK
AAPHBAJIDBFEBJKLKPOCBGLNBK
AEKFAJMHBEKEAKFHBGECCIDJKK
DDLLLLLDDLLLLLLDDLLDDLDLLL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
78
C
OLOR
D
EPTH
–
PRESET
1
2 Grey Levels* 16 Grey Levels*
APCNCOHODNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEDCFIK
AKCBPJCJGIIJCMCEGLLFECGHJK
AEFBJLBGMHPKNJEKPNMJGHNGGK
AAPHBAJJDFABOEMAFLAAIJDPDK
AHKFAJMLEAHCIHPPHIMCIFEILK
DDDLLLLDDDDLLLLDLDLDDLDLDL
APCNCOHODNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEFAGIK
AKCBPJCJGIIJCMCEHKIJONNJPK
AEFBJLBGMHPKNODOAILFMBGHGK
AAPHBAJJCGEGLNGPLGEMOBFNFK
AGKFAMNCIGEECNLKNNLOAMDJJK
DDDLLLLDDDDLLLLDDDLDDLDLDL
256 Grey Levels
APCNCOHODNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFAAEIK
AKCBPJCJGIIJCMCFGMMCGPCLLK
AEFBJLBGMHPLMOEKNKCNINPFGK
AAPHBAJIDCAOLIINOJFNAIKDBK
AFKFAPLBNPHEEAPCAKNOEJMJIK
DDDLLLLDDDDLLLLDLDLDDLDLDL
* only for TIFF and BMP Images.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
79
Image Preset 2
Basic Configuration
I
MAGE
F
ORMAT
–
PRESET
2
Bitmap Format JPEG Format
APCNCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEHGGIK
AKCBPJCJGIIJCMCFHJIFLHFBLK
AEFBJLBGMHPLMNFCIFHLABPGGK
AAPHBAJJCEAFNLODCGJPJPLLFK
AHLFALIIMEKMAHHIDALGCDIKLK
DDLLLLLDDDDLLLLDDDDDDLDLDL
APCNCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEBEFIK
AKCBPJCJGIIJCMCFGILJBIOPNK
AEFBJLBGMHPLMKCGHAAHKHEHGK
AAPHBAJJDHECICEMMLNDPHNJDK
AGLFAOJBACJKKNDNJFMKKKPLJK
DDLLLLLDDDDLLLLDLDDDDLDLDL
TIFF Format
APCNCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFEEHIK
AKCBPJCJGIIJCMCEHOPCJKBNJK
AEFBJLBGMHPKNKFCKCJPOLNFGK
AAPHBAJICDAKIHKOJEMCBOCHHK
AFLFANPCFLKKMAHFECKKOPALIK
DDLLLLLDDDDLLLLDDDDDDLDLDL
R
ESOLUTION
–
PRESET
2
Full Resolution (640 x 480) Quarter Resolution (320 x 240)
APCNCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFCGGIK
AKCBPJCJGIIJCMCEGKMDGIIDPK
AEFBJLBGMHPLMPGKKPIFEKGEGK
AAPHBAJJDEEFBCOOMBLAPLANDK
AGLFALKCKMBEGFMLJEGCOGPILK
DLLLLLLDLLDLLLLDLDLDDLDLDL
APCNCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFEEFIK
AKCBPJCJGIIJCMCEHLPPMHDNJK
AEFBJLBGMHPLMIBOFKPJOMNFGK
AAPHBAJJCHACELEBCMPMJDGPFK
AHLFAOLLGKCCMPIODBBOGPIJJK
DLLLLLLDLLDLLLLDDDLDDLDLDL
JPEG
Q
UALITY
F
ACTOR
–
PRESET
2
JPEG Quality Factor
APCNBLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEEAFIK
AKCBPJCJGIIJCMCEHLPLLPFHLK
AEFBJLBGMHPLNMCAFNDPCLOFGK
AAPHBAJICDGFKABJCPJMJOGJDK
AHKFAKNLJPGAABJBBIFIGOKKKK
DDDLLLLDLDDLLLLDDLDDDLDLDL
Set the JPEG compression level
in the range 000-100.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
80
Advanced Configuration
W
INDOW
D
IMENSIONS
–
PRESET
2
Origin along X Axis
APCNBLHMDNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFCHGIK
AKCBPJCJGIIJCMCFHLIPJCENLK
AEFBJLBGMHPKNMAJECEGFNMGGK
AAPHBAJIDEBAJKEBMLJKPKDFFK
AELFAOPHHOCOIKMODELOCCCKJK
DDDLLLLDDLLLLLLDLLLDDLDLLL
Read a number in the range
0-630
Origin along Y Axis
APCNBLFOBNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFECFIK
AKCBPJCJGIIJCMCEGJIEBABNJK
AEFBJLBGMHPKMJDLBDJHMJJEGK
AAPHBAJIDDFHMJICECNGFNPHBK
AHKFAOLNJBHKGEEPBHJAEKOKIK
DLDLLLLDLLDLLLLDDLLDDLDLDL
Read a number in the range
0-470
Width
APCNBLFMDNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKECCEIK
AKCBPJCJGIIJCMCEGOKMDEIDLK
AEFBJLBGMHPKMIEPIEOFDLGEGK
AAPHBAJJDHBLJAEJCEAMGAEHFK
AGKFAMLDGICECNIIOOGIGLDJJK
DDDLLLLDDDLLLLLDDDLDDLDLLL
Read a number in the range
10-640
Height
APCNBLFMBNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFHCEIK
AKCBPJCJGIIJCMCFHNOKOLFBPK
AEFBJLBGMHPKMKHHKOBLHAPGGK
AAPHBAJJCHFLFJEEMDCDAEPBDK
AHKFAMJJAAJMEPDLEKLMKOELJK
DLDLLLLDLLLLLLLDLDDDDLDLLL
Read a number in the range
10-480
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
81
B
RIGHTNESS
–
PRESET
2
Increase
APCNCKHKHNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKFCDGLK
ADHCPJCJGIIJCMCEHILNFHGNKK
AIFBJLBGMHPKNOHJOGBHOHCLKK
AAPHBAJJDFDOKJNCLOLFMBANBK
AEKFAPMIPNNGAGHKOJJACOOJLK
DLLLLLLDLLLLLLLDLLLDDLDLLL
Read a number in the range
0-100
Decrease
APCNCKHKHNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKFEBFLK
ADHCPJCJGIIJCMCEGJIBPINDMK
AIFBJLBGMHPKNJANBDGLEBJKKK
AAPHBAJJCGHJPAHNFDPJKJGPHK
AFKFAKNBDLOAKMDPEMOMKHJIJK
DLLLLLLDLLLLLLLDDLLDDLDLLL
Read a number in the range
0-100
C
ONTRAST
–
PRESET
2
Increase
APCNCKHKFNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKEBGELK
ADHCPJCJGIIJCMCEHMNMONEHOK
AMFBJLBGMHPLMLDFEPANINBKKK
AAPHBAJIDEFPKFJDBMNBBGPNBK
AFLFAKINMDFCMNHGKJGAKPLKLK
DDLLLLLDDDDLLLLDDLLDDLDLDL
Read a number in the range
0-100
Decrease
APCNCKHKFNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKEHEHLK
ADHCPJCJGIIJCMCEGNOAECPJIK
AMFBJLBGMHPLMMEBLKHBCLKLKK
AAPHBAJICHBIPMDMPBJNHOJPHK
AELFAPJEAFGEGHDDAMBMCGMLJK
DDLLLLLDDDDLLLLDLLLDDLDLDL
Read a number in the range
0-100
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
82
Z
OOM
–
PRESET
2
20% 40%
APCNCKHOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFEEHIK
AKCBPJCJGIIJCMCEHPJEODFHPK
AEFBJLBGMHPKNLAFHGFPFKOFGK
AAPHBAJICADLCCLOMKCAAFCDFK
AHLFANMKFLFAEJNCGCFCODGLIK
DLLLLLLDDLLLLLLDLLDDDLDLLL
APCNCKHOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEGOKIEMOJJK
AEFBJLBGMHPKNMHBIDCDPMFEGK
AAPHBAJIDDHMHLBBCHGMGNEBDK
AGLFAINDJNGGODJHMHCOGKBKKK
DLLLLLLDDLLLLLLDDLDDDLDLLL
60% 80%
APCNCKHOBNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEHGGIK
AKCBPJCJGIIJCMCFHIODMOBLNK
AEFBJLBGMHPLMMAFFBLLLAMGGK
AAPHBAJJCHDEHOPDHIHNIELPHK
AFLFALLAMEFGIONPBAEOCPOKLK
DLLLLLLDDLLLLLLDLLDDDLDLLL
APCNCKHOBNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEDBHIK
AKCBPJCJGIIJCMCFGNKCKFGPLK
AEFBJLBGMHPKNIDMMIOJCEIHGK
AAPHBAJJCHAKOBIHAAOJPFGPHK
AGKFAKMOPMAECHMDICOGCNIIKK
DLDLLLLDDLLLLLLDLLLDDLDLDL
100% 120%
APCNCKHOBNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKFGBFIK
AKCBPJCJGIIJCMCEHLOJCHJNPK
AEFBJLBGMHPLMIEIBKHBGIBFGK
AAPHBAJIDDECOEGFFPPIBMJBDK
AFKFAJKNKFDEEKILFFIGGIHILK
DLDLLLLDDLLLLLLDDLLDDLDLDL
APCNCKHOBNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJAKFADGIK
AKCBPJCJGIIJCMCEGKNFIICDJK
AEFBJLBGMHPLMPDMOPANMOKEGK
AAPHBAJICAAFLNMKLCLEHEPDFK
AEKFAMLEGDACOAMOPAPKOBAJJK
DLDLLLLDDLLLLLLDLLLDDLDLDL
140% 160%
APCNCKHOBNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEFDEIK
AKCBPJCJGIIJCMCFHMJOAKNBNK
AEFBJLBGMHPKNPEIDNJFICDGGK
AAPHBAJJDEENLICIONKFJNANBK
AHKFAPNHDKDCINIGCHJKKEPJIK
DLDLLLLDDLLLLLLDDLLDDLDLDL
APCNCKGOBNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJAKFECFIK
AKCBPJCJGIIJCMCFHNMMCFGNNK
AEFBJLBGMHPKNPCHHMCEEJDHGK
AAPHBAJIDDCBEKJFGLLAHPILDK
AHLFALJGPIDIGBMENKBKEHOJKK
DDDLLLLDLLDLLLLDLDLDDLDLDL
180% 200%
APCNCKGOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEBCHIK
AKCBPJCJGIIJCMCEGLIHKHJPJK
AEFBJLBGMHPLMPFDKOLMAFKFGK
AAPHBAJJCHGJEPHHDEKBJGHFHK
AELFAIPFKBAIAMIMANHKACBJLK
DDDLLLLDLLDLLLLDDDLDDLDLDL
APCNCKGOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEHAEIK
AKCBPJCJGIIJCMCEHKLLAICBPK
AEFBJLBGMHPLMICHFLMAKDBEGK
AAPHBAJJDECOBGNINJONPOBHBK
AFLFANOMGHDOKGMJKIAGILGIJK
DDDLLLLDLLDLLLLDLDLDDLDLDL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
83
C
OLOR
D
EPTH
–
PRESET
2
2 Grey Levels* 16 Grey Levels*
APCNCKHODNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEBEHIK
AKCBPJCJGIIJCMCFGMNCDMIFLK
AEFBJLBGMHPKNJDNFMKBBBHHGK
AAPHBAJIDAHLOLLDCNAPGBJFDK
AGLFANOADDOICLGBMGIGCGBJIK
DDLLLLLDLDLLLLLDDLLDDLDLLL
APCNCKHODNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEHGEIK
AKCBPJCJGIIJCMCFHNOOJDDLNK
AEFBJLBGMHPKNOEJKJNNLHMGGK
AAPHBAJICDDMLCBMMAEDAJPHFK
AHLFAIPJPFNOIBCEGDPKKPGIKK
DDLLLLLDLDLLLLLDLLLDDLDLLL
256 Grey Levels
APCNCKHODNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFCGGIK
AKCBPJCJGIIJCMCEGLKFBBMJJK
AEFBJLBGMHPLMODNHLEFPLFEGK
AAPHBAJJDHHELHPOJPFCOAAJBK
AELFALJKKMOOOMGMLEJKOKJILK
DDLLLLLDLDLLLLLDDLLDDLDLLL
* only for TIFF and BMP Images.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
84
Image Preset 3
Basic Configuration
I
MAGE
F
ORMAT
–
PRESET
3
Bitmap Format JPEG Format
APCJGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFGCHIK
AKCBPJCJGIIJCMCEHPIGEMEDLK
AEFBJLBGMHPKNKFAGJBJNDDGGK
AAPHBAJJCEEBCGEKMMBJGJKLBK
AFLFANKKHILKCDDBAOAAALCILK
DDLLLLLDDDLLLLLDDDDDDLDLLL
APCJGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFAAEIK
AKCBPJCJGIIJCMCEGOLKODPNNK
AEFBJLBGMHPKNNCEJMGFHFIHGK
AAPHBAJJDHAGHPOFCBFFABMJHK
AELFAILDLOIMIJHEKLHMICFJJK
DDLLLLLDDDLLLLLDLDDDDLDLLL
TIFF Format
APCJGOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEFAGIK
AKCBPJCJGIIJCMCFHIPBGBAPJK
AEFBJLBGMHPLMNFAEOPNDJBFGK
AAPHBAJICDEOHKAHHOEEOIDHDK
AHLFALNAOHLMOEDMHMBMMHKJIK
DDLLLLLDDDLLLLLDDDDDDLDLLL
R
ESOLUTION
–
PRESET
3
Full Resolution (640x 480) Quarter Resolution (320 x 240)
APCJGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEDCHIK
AKCBPJCJGIIJCMCFGMMAJDJBPK
AEFBJLBGMHPKNIGIEDOHJIKEGK
AAPHBAJJDEABOPEHCLDGANBNHK
AELFANIABAACEBICKKNEMOFKLK
DLLLLLLDLLLLLLLDLDLDDLDLLL
APCJGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEFAEIK
AKCBPJCJGIIJCMCFHNPMDMCPJK
AEFBJLBGMHPKNPBMLGJLDOBFGK
AAPHBAJJCHEGLGOIMGHKGFHPBK
AFLFAIJJNGDEOLMHAPKIEHCLJK
DLLLLLLDLLLLLLLDDDLDDLDLLL
JPEG
Q
UALITY
F
ACTOR
–
PRESET
3
JPEG Quality Factor
APCJFPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFFEEIK
AKCBPJCJGIIJCMCFHNPIEEEFLK
AEFBJLBGMHPKMLCCLBFNPJCFGK
AAPHBAJICDCBFNLAMFBKGIHJHK
AFKFAMPJCDHGCFNICGOOEGAIKK
DDDLLLLDLDLLLLLDDLDDDLDLLL
Set the JPEG compression level
in the range 000-100.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
85
Advanced Configuration
W
INDOW
D
IMENSIONS
–
PRESET
3
Origin along X Axis
APCJFPHMDNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEDDHIK
AKCBPJCJGIIJCMCEHNIMGJFPLK
AEFBJLBGMHPLMLALKOCEIPAGGK
AAPHBAJIDEFEGHOICBBMAMCFBK
AGLFAINFMCDIKOIHAKAIAKIIJK
DDDLLLLDDLDLLLLDLLLDDLDLDL
Read a number in the range
0-630
Origin along Y Axis
APCJFPFOBNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFGEIK
AKCBPJCJGIIJCMCFGPIHOLAPJK
AEFBJLBGMHPLNODJPPPFBLFEGK
AAPHBAJIDDBDDECLKIFAKLOHFK
AFKFAIJPCNGMEAAGCJCGGCEIIK
DLDLLLLDLLLLLLLDDLLDDLDLLL
Read a number in the range
0-470
Width
APCJFPFMDNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFDGFIK
AKCBPJCJGIIJCMCFGIKPMPJBLK
AEFBJLBGMHPLNPENGIIHOJKEGK
AAPHBAJJDHFPGNOAMOIKJGFHBK
AEKFAKJBNEDCAJMBNANOEDJLJK
DDDLLLLDDDDLLLLDDDLDDLDLDL
Read a number in the range
10-640
Height
APCJFPFMBNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEGGFIK
AKCBPJCJGIIJCMCEHLOJBAEDPK
AEFBJLBGMHPLNNHFECHJKCDGGK
AAPHBAJJCHBPKEONCJKFPCOBHK
AFKFAKLLLMIKGLHCHEAKIGOJJK
DLDLLLLDLLDLLLLDLDDDDLDLDL
Read a number in the range
10-480
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
86
B
RIGHTNESS
–
PRESET
3
Increase
APCJGOHKHNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKFACELK
ALPCPJCJGIIJCMCEHNNMGGBPEK
AIFBJLBGMHPKMKFILFKKCKIIKK
AAPHBAJIDACGDMGODKDKODCLBK
AGLFAKOKDCBAOMIKGIMGKDBJKK
DDLLLLLDDLDLLLLDLLLDDLDLLL
Read a number in the range
0-100
Decrease
APCJGOHKHNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKFGAHLK
ALPCPJCJGIIJCMCEGMOAMJKBCK
AIFBJLBGMHPKMNCMEANGIMDJKK
AAPHBAJICDGBGFMBNHHGILEJHK
AHLFAPPDPECGEGMPMNLKCKGIIK
DDLLLLLDDLDLLLLDDLLDDLDLLL
Read a number in the range
0-100
C
ONTRAST
–
PRESET
3
Increase
APCJGOHKFNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKEDHGLK
ALPCPJCJGIIJCMCEHJLNNMDFAK
AMFBJLBGMHPLNPBEBMLAEALJKK
AAPHBAJJDBEHDACPJIFODENLBK
AHKFAPKPAMJECHIGCIDGCCEKKK
DLLLLLLDLDLLLLLDDLLDDLDLDL
Read a number in the range
0-100
Decrease
APCJGOHKFNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKEFFFLK
ALPCPJCJGIIJCMCEGIIBHDILGK
AMFBJLBGMHPLNIGAOJMMOGAIKK
AAPHBAJJCCAAGJIAHFBCFMLJHK
AGKFAKLGMKKCINMDINEKKLDLIK
DLLLLLLDLDLLLLLDLLLDDLDLDL
Read a number in the range
0-100
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
87
Z
OOM
–
PRESET
3
20% 40%
APCJGOHOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEFAGIK
AKCBPJCJGIIJCMCFHJJHBIEFPK
AEFBJLBGMHPLMMAHJKDNIICFGK
AAPHBAJICAHPNPBHCAKGPDDDBK
AFLFALOIOHEGGNJLFMOEMLMJIK
DLLLLLLDDLDLLLLDLLDDDLDLDL
APCJGOHOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDCFIK
AKCBPJCJGIIJCMCFGIKLLHPLJK
AEFBJLBGMHPLMLHDGPEBCOJEGK
AAPHBAJIDDDIIGLIMNOKJLFBHK
AELFAOPBCBHAMHNOPJJIECLIKK
DLLLLLLDDLDLLLLDDLDDDLDLDL
60% 80%
APCJGOHOBNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFGCHIK
AKCBPJCJGIIJCMCEHOOADFAJNK
AEFBJLBGMHPKNLAHLNNJGCAGGK
AAPHBAJJCHHAIDFKJCPLHCKPDK
AHLFANJCHIEAKKJGCOPIAHEILK
DLLLLLLDDLDLLLLDLLDDDLDLDL
APCJGOHOBNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKFCFGIK
AKCBPJCJGIIJCMCEGLKBFOHNLK
AEFBJLBGMHPLMPDOCEILPGEHGK
AAPHBAJJCHEOBMCOOKGPADHPDK
AEKFAMOMEABCADIKLMFAAFCKKK
DLDLLLLDDLDLLLLDLLLDDLDLLL
100% 120%
APCJGOHOBNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALEHFEIK
AKCBPJCJGIIJCMCFHNOKNMIPPK
AEFBJLBGMHPKNPEKPGBDLKNFGK
AAPHBAJIDDAGBJMMLFHOOKIBHK
AHKFAPIPBJCCGOMCGLDAEANKLK
DLDLLLLDDLDLLLLDDLLDDLDLLL
APCJGOHOBNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJALEBHHIK
AKCBPJCJGIIJCMCFGMNGHDDBJK
AEFBJLBGMHPKNIDOADGPBMGEGK
AAPHBAJICAEBEAGDFIDCICODBK
AGKFAKJGNPBEMEIHMOEMMJKLJK
DLDLLLLDDLDLLLLDLLLDDLDLLL
140% 160%
APCJGOHOBNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJAKFEHFIK
AKCBPJCJGIIJCMCEHKJNPBMDNK
AEFBJLBGMHPLMIEKNBPHFAPGGK
AAPHBAJJDEAJEFIBAHCDGLBNFK
AFKFAJPFIGCEKJMPBJCMIMFLIK
DLDLLLLDDLDLLLLDDLLDDLDLLL
APCJGOGOBNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJALEFGEIK
AKCBPJCJGIIJCMCEHLMPNOHPNK
AEFBJLBGMHPLMICFJAEGJLPHGK
AAPHBAJIDDGFLHDMIBDGIJJLHK
AFLFANLEEECOEFINOEKMGPELKK
DDDLLLLDLLLLLLLDLDLDDLDLLL
180% 200%
APCJGOGOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFAGGIK
AKCBPJCJGIIJCMCFGNIEFMINJK
AEFBJLBGMHPKNIFBECNONHGFGK
AAPHBAJJCHCNLCNONOCHGAGFDK
AGLFAONHBNBOCIMFDDMMCKLLLK
DDDLLLLDLLLLLLLDDDLDDLDLLL
APCJGOGOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFGEFIK
AKCBPJCJGIIJCMCFHMLIPDDDPK
AEFBJLBGMHPKNPCFLHKCHBNEGK
AAPHBAJJDEGKOLHBDDGLAIAHFK
AHLFALMONLCIICIAJGLAKDMKJK
DDDLLLLDLLLLLLLDLDLDDLDLLL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
88
C
OLOR
D
EPTH
–
PRESET
3
2 Grey Levels* 16 Grey Levels*
APCJGOHODNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFAAGIK
AKCBPJCJGIIJCMCEGKNBMHJHLK
AEFBJLBGMHPLMODPLAMDMDLHGK
AAPHBAJIDADPBGBKMHIJJHIFHK
AELFALMCIPPOAPCIPIDAAOLLIK
DDLLLLLDLDDLLLLDDLLDDLDLDL
APCJGOHODNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFGCFIK
AKCBPJCJGIIJCMCEHLONGICJNK
AEFBJLBGMHPLMJELEFLPGFAGGK
AAPHBAJICDHIEPLFCKMFPPOHBK
AFLFAONLEJMIKFGNFNEMIHMKKK
DDLLLLLDLDDLLLLDLLLDDLDLDL
256 Grey Levels
APCJGOHODNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEDCHIK
AKCBPJCJGIIJCMCFGNKGOKNLJK
AEFBJLBGMHPKNJDPJHCHCJJEGK
AAPHBAJJDHDAEKFHHFNEBGBJFK
AGLFANLIBAPIMICFIKCMMCDKLK
DDLLLLLDLDDLLLLDDLLDDLDLDL
* only for TIFF and BMP Images.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
89
Image Preset 4
Basic Configuration
I
MAGE
F
ORMAT
–
PRESET
4
Bitmap Format JPEG Format
APCJGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFEEFIK
AKCBPJCJGIIJCMCFHIOBDCKBJK
AEFBJLBGMHPKNKCHMIHBKFJHGK
AAPHBAJICBDLCJDJLKBGIBABBK
AEKFAJIBALCAIPKPLAEEKIHJIK
DDDLLLLDLDDLLLLDLLDDDLDLDL
APCJGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFCGGIK
AKCBPJCJGIIJCMCFGJNNJNBPPK
AEFBJLBGMHPKNNFDDNANADCGGK
AAPHBAJIDCHMHAJGFHFKOJGDHK
AFKFAMJIMNBGCFOKBFDICBAIKK
DDDLLLLDLDDLLLLDDLDDDLDLDL
TIFF Format
APCJGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEHGEIK
AKCBPJCJGIIJCMCEHPJGBPONLK
AEFBJLBGMHPLMNCHOPJFEPLEGK
AAPHBAJJCGDEHFHEAIELAAJNDK
AGKFAPPLJECGEIKCMCFIGEPILK
DDDLLLLDLDDLLLLDLLDDDLDLDL
R
ESOLUTION
–
PRESET
4
Full Resolution (640 x 480) Quarter Resolution (320 x 240)
APCJGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEBEFIK
AKCBPJCJGIIJCMCEGLKHONHDNK
AEFBJLBGMHPKNIBPOCIPOOAFGK
AAPHBAJIDBHLOADEFNDJOFLHHK
AFKFAJKLGDJIONBMBEJAGNALIK
DLDLLLLDDLDLLLLDDLLDDLDLDL
APCJGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEHGGIK
AKCBPJCJGIIJCMCEHKJLECMNLK
AEFBJLBGMHPKNPGLBHPDEILEGK
AAPHBAJICCDMLJJLLAHFINNFBK
AEKFAMLCKFKOEHFJLBOMOEHKKK
DLDLLLLDDLDLLLLDLLLDDLDLDL
JPEG
Q
UALITY
F
ACTOR
–
PRESET
4
JPEG Quality Factor
APCJFLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFHCGIK
AKCBPJCJGIIJCMCEHKJPDKKHJK
AEFBJLBGMHPKMLFFBADFIPIEGK
AAPHBAJJCGFLFCMDLDBFIANDHK
AELFAINCFAOMIJEGJIKKOFFJJK
DDLLLLLDDDDLLLLDLDDDDLDLDL
Set the JPEG compression level
in the range 000-100.
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
90
Advanced Configuration
W
INDOW
D
IMENSIONS
–
PRESET
4
Origin along X Axis
APCJFLHMDNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEBFFIK
AKCBPJCJGIIJCMCFHKOLBHLNJK
AEFBJLBGMHPLMLHMAPEMPJKHGK
AAPHBAJJDBCOGIJLFHBDOEIPBK
AHKFAMPOLBKCACBJLEEMKJNJKK
DDLLLLLDLLLLLLLDDDLDDLDLLL
Read a number in the range
0-630
Origin along Y Axis
APCJFLFOBNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEHAGIK
AKCBPJCJGIIJCMCEGIOAJFONLK
AEFBJLBGMHPLNOEOFOJNGNPFGK
AAPHBAJJDGGJDLFINOFPEDENFK
AELFAMLEFOPGOMJIJHGCMBBJLK
DLLLLLLDDLDLLLLDLDLDDLDLDL
Read a number in the range
0-470
Width
APCJFLFMDNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFBAHIK
AKCBPJCJGIIJCMCEGPMILBHDJK
AEFBJLBGMHPLNPDKMJOPJPAFGK
AAPHBAJIDCCFGCJDLIIFHOPNBK
AFLFAOLKKHKIKFFPGOJKOAMKKK
DDLLLLLDLDLLLLLDLLLDDLDLLL
Read a number in the range
10-640
Height
APCJFLFMBNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEEAHIK
AKCBPJCJGIIJCMCFHMIOGOKBNK
AEFBJLBGMHPLNNACODBBNEJHGK
AAPHBAJICCGFKLJOFPKKBKELHK
AELFAOJAMPBAMHOMMKEOCFLIKK
DLLLLLLDDLLLLLLDDLDDDLDLLL
Read a number in the range
10-480
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
91
B
RIGHTNESS
–
PRESET
4
Increase
APCJGKHKHNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKFBDGLK
ALHCPJCJGIIJCMCFHNJOEHMPAK
AIFBJLBGMHPLNNDFOCKBEKOIKK
AAPHBAJJDBEDLINPFOAOGNFDDK
AFLFAPMPJBMOILDDHOIOEJALIK
DDLLLLLDDLLLLLLDDDDDDLDLLL
Read a number in the range
0-100
Decrease
APCJGKHKHNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKFHBFLK
ALHCPJCJGIIJCMCFGMKCOIHBGK
AIFBJLBGMHPLNKEBBHNNOMFJKK
AAPHBAJJCCAEOBHALDECAFDBFK
AELFAKNGFHPICBHGNLPCMAHKKK
DDLLLLLDDLLLLLLDLDDDDLDLLL
Read a number in the range
0-100
C
ONTRAST
–
PRESET
4
Increase
APCJGKHKFNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKECGELK
ALHCPJCJGIIJCMCFHJPPPNOFEK
AMFBJLBGMHPKMIHJELLLCANJKK
AAPHBAJIDACCLEJOPMGKLKKDDK
AEKFAKIKKPEKEADPDOHOMIFIIK
DLLLLLLDLDDLLLLDLDDDDLDLDL
Read a number in the range
0-100
Decrease
APCJGKHKFNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKEEEHLK
ALHCPJCJGIIJCMCFGIMDFCFLCK
AMFBJLBGMHPKMPANLOMHIGGIKK
AAPHBAJICDGFONDBBBCGNCMBFK
AFKFAPJDGJHMOKHKJLACEBCJKK
DLLLLLLDLDDLLLLDDDDDDLDLDL
Read a number in the range
0-100
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
92
Z
OOM
–
PRESET
4
20% 40%
APCJGKHOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEHGEIK
AKCBPJCJGIIJCMCEHOPAGGKHNK
AEFBJLBGMHPLMMHADLFFPOIEGK
AAPHBAJJCFAFNAGEFGKJBLJJBK
AEKFAPMDJENMMBAFOCKAGIJILK
DLDLLLLDLLLLLLLDDDDDDLDLLL
APCJGKHOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEBEHIK
AKCBPJCJGIIJCMCEGPMMMJBJLK
AEFBJLBGMHPLMLAEMOCJFIDFGK
AAPHBAJJDGECIJMLLLOFHDPLHK
AFKFAKNKFCOKGLEAEHNMOBOJJK
DLDLLLLDLLLLLLLDLDDDDLDLLL
60% 80%
APCJGKHOBNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFEEFIK
AKCBPJCJGIIJCMCFHJIHELOLPK
AEFBJLBGMHPKNLHABMLBBEKHGK
AAPHBAJICCAKIMCJOEPEJKAFDK
AGKFAJLJALNKAGAIJALMKEBJIK
DLDLLLLDLLLLLLLDDDDDDLDLLL
APCJGKHOBNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALFADEIK
AKCBPJCJGIIJCMCFGMMGCAJPJK
AEFBJLBGMHPLMPEJIFODIAOGGK
AAPHBAJICCDEBDFNJMGAOLNFDK
AFLFAIMHDDIIKPBEACBEKGHLJK
DLLLLLLDLLLLLLLDDDLDDLDLDL
100% 120%
APCJGKHOBNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKEFDGIK
AKCBPJCJGIIJCMCEHKINKCGNNK
AEFBJLBGMHPKNPDNFHHLMMHEGK
AAPHBAJJDGHMBGLPMDHBACCLHK
AGLFALKEGKLIMCFMNFHEODILIK
DLLLLLLDLLLLLLLDLDLDDLDLDL
APCJGKHOBNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJAKEDBFIK
AKCBPJCJGIIJCMCEGLLBANNDLK
AEFBJLBGMHPKNIEJKCAHGKMFGK
AAPHBAJJCFDLEPBACODNGKEJBK
AHLFAOLNKMIOGIBJHAAIGKPKKK
DLLLLLLDLLLLLLLDDDLDDLDLDL
140% 160%
APCJGKHOBNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALFGBHIK
AKCBPJCJGIIJCMCFHNPKIPCBPK
AEFBJLBGMHPLMIDNHAJPCGFHGK
AAPHBAJIDBHDEKPCHBCMIDLHFK
AELFANNOPFLOAFFBKHGICPAKLK
DLLLLLLDLLLLLLLDLDLDDLDLDL
APCJGKGOBNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJAKEHAGIK
AKCBPJCJGIIJCMCFHMKIKAJNPK
AEFBJLBGMHPLMIFCDBCOONFGGK
AAPHBAJJDGBPLIEPPHDJGBDBHK
AEKFAJJPDHLEOJBDFKOIMMBKJK
DDLLLLLDDLDLLLLDDLLDDLDLDL
180% 200%
APCJGKGOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFCAEIK
AKCBPJCJGIIJCMCEGKODCCGPLK
AEFBJLBGMHPKNICGODLGKBMEGK
AAPHBAJICCFHLNKNKICIIIMPDK
AHKFAKPMGOIEIEFLINIIIJOKIK
DDLLLLLDDLDLLLLDLLLDDLDLDL
APCJGKGOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFECHIK
AKCBPJCJGIIJCMCEHLNPINNBNK
AEFBJLBGMHPKNPFCBGMKAHHFGK
AAPHBAJIDBBAOEACEFGEOAKNFK
AGKFAPOFKILCCOBOCIPEAAJLKK
DDLLLLLDDLDLLLLDDLLDDLDLDL
Enter Gun Configuration Exit and Save Gun Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
ADVANCED
IMAGE CAPTURE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
93
C
OLOR
D
EPTH
–
PRESET
4
2 Grey Levels* 16 Grey Levels*
APCJGKHODNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCFGNLGLJHFJK
AEFBJLBGMHPLMOEIBBKLLFBGGK
AAPHBAJJDFEFBJGJLBIGHPCPHK
AFKFAPOJPMGEKDLGEGHEKNOKLK
DDDLLLLDDDLLLLLDLDLDDLDLLL
APCJGKHODNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFEEHIK
AKCBPJCJGIIJCMCFHMIKBGMLPK
AEFBJLBGMHPLMJDMOENHBDKHGK
AAPHBAJJCGACEAMGFMMKBHENBK
AEKFAKPADKFCAJPDODAICEJLJK
DDDLLLLDDDLLLLLDDDLDDLDLLL
256 Grey Levels
APCJGKHODNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEBEFIK
AKCBPJCJGIIJCMCEGKMBJEDJLK
AEFBJLBGMHPKNJEIDGEPFPDFGK
AAPHBAJIDCEKEFCEADNLPOLDFK
AHKFAJJDGDGCGELLDEGIGBGLIK
DDDLLLLDDDLLLLLDLDLDDLDLLL
* only for TIFF and BMP Images.
GRYPHON™ D432/D432E
94
5.3 ADVANCED DATA FORMAT
Advanced data format has been designed to offer you complete flexibility in changing
the format of barcode data before transmitting it to the host system.
Up to 5 advanced code management formats can be defined by completing the four
given procedures following the desired order:
− Format Definition
− Mismatch Result
− Enable/Disable Format
− Match Conditions
The formats defined will be restored to default values when reading the general
"Restore Default" code given in par. 6.5.
Read the Enter Configuration
Command
Enable or Disable the Format
(see par. 2.14.3)
Choose the method and define
the format
YES
Define another?
Define Format
1, 2, 3, 4, or 5 (par. 2.14.1)
Method 1
Extract information from
barcode (page 89)
Method 2
Manipulate barcode data
(page 94)
Define Mismatch Result
(see par. 2.14.4)
Define one or more Match
Conditions (par. 2.14.2)
Read the Exit and save
Configuration Command
AMHKHPEMDNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKECFEIK
AKCBPJCJGIIJCMCEGLLJGOFLPK
AEFBJLBGMHPLMOFLCOIFHHOHGK
AAPHBAJJDGFPAKHBBIFEKNCFFK
AEKFBMPJNBJIONFLOAAKACLIIK
DLLDLDLLDLLLLLLDDLLDDLDLLL
AMHKDPEMDNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEEDEIK
AKCBPJCJGIIJCMCEGOMAJIABNK
AEFBJLBGMHPLNJGPCKBKKODEGK
AAPHBAJJCCHOPLEOMLKLDFOFHK
AHKFBNMCPOFKAHHMBGEAIHGKIK
DDDDLDLLLDDLLLLDDLDDDLDLDL
CONFIGURATION USING CODE SYMBOLS
95
5.3.1 Format Definition
STEP 1 FORMAT DEFINITION
Define Format 1 Define Format 2
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEAFGIK
AKCBPJCJGIIJCMCFGLIBLHNBJK
AEFBJLBGMHPLNODFHCIGIAPGGK
AAPHBAJJCEANJLPCFANLOLDLDK
AGLFAONBHJFAIFILILDKIIAKJK
DDLLLDLDLLLLLLLDDDDDDLDLDL
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFFFEIK
AKCBPJCJGIIJCMCEHNMKDFCDNK
AEFBJLBGMHPKMOEBKABOMMGEGK
AAPHBAJIDAEFJOBAAPMKACMFHK
AFLFANLCCAGAOIMDFMFKMNPKIK
DDLLLDLDLLLLLLLDLDDDDLDLDL
Define Format 3
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKFBCFIK
AKCBPJCJGIIJCMCEGIILFOFHLK
AEFBJLBGMHPLNKHIDJEMFICFGK
AAPHBAJIDAHLABGEHHFOHDBFHK
AGKFAMMMBIDCEBNPMOPCMPJIJK
DDDLLDLDLLLLLLLDLDLDDLDLLL
Define Format 4 Define Format 5
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALEECHIK
AKCBPJCJGIIJCMCFHOMANMKFPK
AEFBJLBGMHPKMKAMOLNEBELHGK
AAPHBAJJCEDDAEIGCIEPJKOLDK
AFKFAPKPEBACCMJHBJJCIKGIIK
DDDLLDLDLLLLLLLDDDLDDLDLLL
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJALECAEIK
AKCBPJCJGIIJCMCFGPPMHDBLJK
AEFBJLBGMHPKMNHIBOKILCAGGK
AAPHBAJJDHHEFNCJMFADPCIJFK
AEKFAKLGIHDEIGNCLMOOADBJKK
DDDLLDLDLLLLLLLDLDLDDLDLLL
GRYPHON™ D432/D432E
96
STEP 2 FORMAT DEFINITION
Method 1 - Extracting Information from Barcode
Method 1 allows extracting one or more fields by position or by characters from the
decoded barcode. These fields are sent to the host computer as data of the output
message, while the characters not included in the formatting procedure will be
deleted and not inserted in the output message.
These two kinds of extraction (by position / by character) can be used together within
the same format definition; furthermore, it possible to complete the new format by
adding a new string of characters. Since there is no fixed rule, the procedures can be
freely put in order and repeated according to your requirement.
The only limit is determined by the size of the internal reserved memory used to
define the format.
Begin Format
Definition 1, 2, 3, 4,
or 5
Add new
string
Extraction by
Characters
Extraction by
Position
Add Add
Add
Add
Add
CONFIGURATION USING CODE SYMBOLS
97
Example Method 1 Extracting Information from Barcode
Decoded code: <DATALOGICproduct>
Formatting procedure: Add new string + Extract field by position + Add new string +
Extract field by character + Add new string
Add New String
String
character(s)
End String
Add
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+ 32 + 31 +
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+
Field Extraction by Position
Field Starting Position Field Ending Position End Selection Add
AOBLHMFKFNGNENEIEPANHOGOCK
AHJLJDHODKEOFMHMLJAKFAAEKK
AOJDPBCJGIIJCMCFHLLMNMLLCK
AIFBJLBGMHPKNODINAHHKIIIOK
AAPHBAJJCEENANJPDPICKJMNDK
AELFAOIHAAIMAJHDEOOCAELIJK
DDLLDLLDLDLLLLLDLLLDDLDLDL
+ 1 +
AMHMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFAEHIK
AKCBPJCJGIIJCMCEGJNNFJBHPK
AEFBJLBGMHPKMODHFLJEFONGGK
AAPHBAJJDDGMOPACEHFBIKCHDK
AHLEBJJEGHHCCJIDKKMMCPEILK
DDLLLLDDLDLLLLLDDDLDDLDLDL
+ 3 +
AMEMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHPIGEADPNK
AEFBJLBGMHPLNPAAJOFOEGDHGK
AAPHBAJJDDFCKPDOMCFJCJOLFK
AFKEBNKLKLEGOPOFPGLMEPLIJK
DLLLLLDDLDDLLLLDDLLDDLDLLL
+
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+
Add New String
String
character(s)
End
String Add
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+ 32 + 31 +
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+
Field Extraction by Character
Field Starting
Characters
Field Ending
Character
End Selection Including
Starting and Ending Characters
Add
AOBLHMFKFNGNENEIEPANHOGOCK
AHJLJDHODKEOFMHMLJAKFAAEKK
AOJDPBCJGIIJCMCFHLLMNMLLCK
AIFBJLBGMHPKNODINAHHKIIIOK
AAPHBAJJCEENANJPDPICKJMNDK
AELFAOIHAAIMAJHDEOOCAELIJK
DDLLDLLDLDLLLLLDLLLDDLDLDL
+ 4F + 47 +
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
+ 72 +
ANGKGKCKFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEDCEIK
AKCBPJCJGIIJCMCFGNKOLDHPNK
AEFBJLBGMHPKNNBLBIKDNOPEGK
AAPHBAJICGHGMLMOIAGMOMCHFK
AELFBKMIOONGGOJPDEMGAAGJKK
DLLDLDLLDLDLLLLDLDDDDLDLDL
+
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+
Add New String
String
character(s)
End
String
End Format
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+ 32 + 31 +
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Output message: <21DAT21OGICpr21>
GRYPHON™ D432/D432E
98
FIELD EXTRACTION BY CHARACTER
a) Define Field Starting Character(s)
Field Starting Character(s)
AOCKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJALEDGHKK
AOJDPBCJGIIJCMCEGNOJDNBPEK
AIFBJLBGMHPLNIDFFINJEEAJOK
AAPHBAJICCGOBPPLKMDJODJLBK
AHLFALLKHHHKCDLGLEPOABEKIK
DLDLDLLDLDDLLLLDDDLDDLDLLL
Read the Hex value from the Hex/Numeric table
identifying the starting character(s) of the field to be
extracted. Valid values are in the range 00-7F.
b) Define Field Ending Character(s)
Field Ending Character(s)
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
Read the Hex value from the Hex/Numeric table
identifying the ending character(s) of the field to be
extracted. Valid values are in the range 00-7F.
c) Field Delimiter Selection
Include Start/End
Characters Discard Start/End
Characters
ANGKGKCKFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEDCEIK
AKCBPJCJGIIJCMCFGNKOLDHPNK
AEFBJLBGMHPKNNBLBIKDNOPEGK
AAPHBAJICGHGMLMOIAGMOMCHFK
AELFBKMIOONGGOJPDEMGAAGJKK
DLLDLDLLDLDLLLLDLDDDDLDLDL
OR
ANGKGKAKHNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEGHGIK
AKCBPJCJGIIJCMCFGLMLMKGDJK
AEFBJLBGMHPKMLGFPEPOPDMEGK
AAPHBAJJDFDNAIMLIINFBCODDK
AHKFBIKGJAGEKLGKEKMEIMAIKK
DDLDLDLLLLDLLLLDLLLDDLDLDL
d) EITHER Add Field or String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
− To add other fields selected by characters read the
code and repeat this procedure from step a for each
field to be selected;
− To add a new string of characters read the code and
follow the procedure described on page 100;
− To add the procedure selecting new fields by
position read the code and follow the description
given on page 99.
OR End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
CONFIGURATION USING CODE SYMBOLS
99
FIELD EXTRACTION BY POSITION
a) Define Field Starting Position
Field Starting Position
AOBLHMFKFNGNENEIEPANHOGOCK
AHJLJDHODKEOFMHMLJAKFAAEKK
AOJDPBCJGIIJCMCFHLLMNMLLCK
AIFBJLBGMHPKNODINAHHKIIIOK
AAPHBAJJCEENANJPDPICKJMNDK
AELFAOIHAAIMAJHDEOOCAELIJK
DDLLDLLDLDLLLLLDLLLDDLDLDL
Read a number corresponding to the field starting
position.
b) Define Field Ending Position
Field Ending Position Last Position
AMHMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFAEHIK
AKCBPJCJGIIJCMCEGJNNFJBHPK
AEFBJLBGMHPKMODHFLJEFONGGK
AAPHBAJJDDGMOPACEHFBIKCHDK
AHLEBJJEGHHCCJIDKKMMCPEILK
DDLLLLDDLDLLLLLDDDLDDLDLDL
OR
AODIHMFKFNGNENEIEPANHOGOCK
AHJLJDHODKEOFMHMLJAKECEFKK
AOJDDBCJGIIJCMCFGJOBMJMDAK
AIFBJLBGMHPKNPHCPMPIMIMIOK
AAPHBAJJDFBPALCKEKLEJMBHFK
AELFAMLGJAMMMEIECNBGEMEIIK
DLDLDLLDDLDLLLLDLDLDDLDLDL
Read a number corresponding
to the field ending position.
Read this code to set the field
ending position to the last
position of the code:
c) End Field Selection
End Selection
AMEMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHPIGEADPNK
AEFBJLBGMHPLNPAAJOFOEGDHGK
AAPHBAJJDDFCKPDOMCFJCJOLFK
AFKEBNKLKLEGOPOFPGLMEPLIJK
DLLLLLDDLDDLLLLDDLLDDLDLLL
Read the code to end the field selection.
d) EITHER Add Field or String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
− To add other fields selected by position read the
code and repeat this procedure from step a for each
field to be selected;
− To add a new string of characters read the code and
follow the procedure described on page 100;
− To add the procedure selecting new fields by
characters read the code and follow the description
given on page 98.
OR End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
GRYPHON™ D432/D432E
100
ADD NEW STRING
a) Define New String
String Character(s)
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
Read the Hex value from the Hex/Numeric table
identifying the character(s). Valid values are in the range
00-7F.
b) End String
End String
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
Read the code to end the string defined in step a.
c) EITHER Add Procedure
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
− To add the procedure extracting fields by characters
follow the steps given on page 98;
− To add the procedure extracting fields by position
follow the steps given on page 99;
OR End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
CONFIGURATION USING CODE SYMBOLS
101
Method 2 - Manipulating the Barcode Data
Method 2 allows modifying the barcode data by means of one of the following
procedures:
− String insertion;
− String deletion;
− String substitution;
− Field deletion.
Once the data has been modified, it is sent to the host computer as data of the output
message.
Unlike Method 1 this method does not allow associating different procedures
together. This means that each format definition corresponds to a single procedure.
Despite this, it possible to add a new string of characters to the beginning or ending
part of the formatted barcode.
The only limit is determined by the size of the internal reserved memory used to
define the format.
GRYPHON™ D432/D432E
102
STRING INSERTION
To complete this procedure proceed as follows:
Define Format
1, 2, 3, 4, or 5
End Format Definition
Add String?
Insert String
Add String?
Add new
String
Add
YES
Add new
String Add
NO
NO
YES
Example
Decoded code: <DATALOGICproduct>
Formatting procedure: Add new string + Insert String
Add New String
String
character(s)
End String
Add
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+ 31 + 37 +
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+
String Insertion Procedure
Insert String String Position End Selection End Format
APCJHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJAKFBEFKK
AOJDPBCJGIIJCMCFGNNKPHPHEK
AIFBJLBGMHPKMNFKECEKLIIKOK
AAPHBAJJCHGNHBHGFNLIIFKNBK
AGLFAPNMBCJCECKOAHGMMHGJIK
DLLLDLLDLDDLLLLDDLLDDLDLLL
+ + 31 + 32 + 33 +
ANGKGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFFFHIK
AKCBPJCJGIIJCMCEHMIMGAPNPK
AEFBJLBGMHPKMMEAMOFNIIJHGK
AAPHBAJJCDCACHFDPDKEMILFDK
AGLFBOPJJHMAKGJOKEFMCECLIK
DLDDLDDLLLLLLLLDDDLDDLDLLL
+ 5
AMEMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHPIGEADPNK
AEFBJLBGMHPLNPAAJOFOEGDHGK
AAPHBAJJDDFCKPDOMCFJCJOLFK
AFKEBNKLKLEGOPOFPGLMEPLIJK
DLLLLLDDLDDLLLLDDLLDDLDLLL
+
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Output message: <17DATA123LOGICproduct>
CONFIGURATION USING CODE SYMBOLS
103
String Insertion Procedure
a) Insert String
Insert String
APCJHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJAKFBEFKK
AOJDPBCJGIIJCMCFGNNKPHPHEK
AIFBJLBGMHPKMNFKECEKLIIKOK
AAPHBAJJCHGNHBHGFNLIIFKNBK
AGLFAPNMBCJCECKOAHGMMHGJIK
DLLLDLLDLDDLLLLDDLLDDLDLLL
Read the Hex value from the Hex/Numeric table
identifying the characters to be inserted. Valid values are
in the range 00-7F.
b) Define String Position
String Position
ANGKGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFFFHIK
AKCBPJCJGIIJCMCEHMIMGAPNPK
AEFBJLBGMHPKMMEAMOFNIIJHGK
AAPHBAJJCDCACHFDPDKEMILFDK
AGLFBOPJJHMAKGJOKEFMCECLIK
DLDDLDDLLLLLLLLDDDLDDLDLLL
Read a number corresponding to the string position within
the barcode.
c) End Selection
End Selection
AMEMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHPIGEADPNK
AEFBJLBGMHPLNPAAJOFOEGDHGK
AAPHBAJJDDFCKPDOMCFJCJOLFK
AFKEBNKLKLEGOPOFPGLMEPLIJK
DLLLLLDDLDDLLLLDDLLDDLDLLL
Read the code to end the field selection.
d) EITHER Add String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
To add a new string of characters read the code and
follow the procedure described on page 111;
OR End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
GRYPHON™ D432/D432E
104
STRING DELETION
To complete this procedure proceed as follows:
End Format Definition
Add String?
Delete String
Add String?
Add new
String
Add
Define Format
1, 2, 3, 4, or 5
YES
Add new
String Add
NO
NO
YES
Delete
Example
Decoded code: <DATALOGICproduct>
Formatting procedure: Delete First String + Delete Second String + Add New
String.
String Deletion Procedure
Delete String Loop End Selection Add
AMHLGLEKHNGNENEIEPANHOGOCK
AHLNEBIMDKEOFMHMLJAKEDDEJK
AKCBPJCJGIIJCMCEHKMCKLPJPK
AEFBJLBGMHPLMMEILNAAMKFHGK
AAPHBAJIDFHJHFNFIEAPKCANBK
AFKFAIMEHLPACFEFIKDEGEPKLK
DLDLLLLDDLLLLLLDDDLDDLDLDL
+ 4C +4F +
ANGKBPDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEBAFIK
AKCBPJCJGIIJCMCFGMOOCHKHPK
AEFBJLBGMHPKNOAOGNPALEBGGK
AAPHBAJJDHEGKODPGMNFGEBBDK
AHKFBMOKBMDCKNFKANNGAHJLLK
DLLDLDLLLLDLLLLDDDDDDLDLLL
+ 6F +64 +
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+
Add New String
String
Character(s)
End String End Format
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+ 33 + 31 +
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Output message: <DATAGICpruct31>
CONFIGURATION USING CODE SYMBOLS
105
String Deletion Procedure
a) Delete String
Delete
AMHLGLEKHNGNENEIEPANHOGOCK
AHLNEBIMDKEOFMHMLJAKEDDEJK
AKCBPJCJGIIJCMCEHKMCKLPJPK
AEFBJLBGMHPLMMEILNAAMKFHGK
AAPHBAJIDFHJHFNFIEAPKCANBK
AFKFAIMEHLPACFEFIKDEGEPKLK
DLDLLLLDDLLLLLLDDDLDDLDLDL
Read the Hex value from the Hex/Numeric table
identifying the string character(s) to be deleted. Valid
values are in the range 00-7F.
b) (optional) Select Other Strings to be Deleted
Loop
ANGKBPDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEBAFIK
AKCBPJCJGIIJCMCFGMOOCHKHPK
AEFBJLBGMHPKNOAOGNPALEBGGK
AAPHBAJJDHEGKODPGMNFGEBBDK
AHKFBMOKBMDCKNFKANNGAHJLLK
DLLDLDLLLLDLLLLDDDDDDLDLLL
Read the code above and repeat the procedure from step
a.
c) End Selection
End Selection
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
Read the code to end the selection.
d) EITHER Add String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
To add a new string of characters read the code and
follow the procedure described on page 111;
OR End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
GRYPHON™ D432/D432E
106
STRING SUBSTITUTION
To complete this procedure proceed as follows:
Define Format
1, 2, 3, 4, or 5
End Format Definition
Add String?
Substitute String
Add String?
Add new
String
Add
YES
Add new
String Add
NO
NO
YES
Example
Decoded code: <DATALOGICproduct>
Formatting procedure: Add new string + String substitution + Add new string.
Add New String String Substitution Procedure
String
Character(s)
End String Add
Substitute
String
Substituting
String
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+ 34 + 33 +
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+
APAKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJAKEDHGKK
AOJDPBCJGIIJCMCEGOLKBIGLCK
AIFBJLBGMHPLNKFOPDLBPKNKOK
AAPHBAJICGBMGPOCHHEBNAMFHK
AHLFAKKFLHGOGEAFKMLMANFIKK
DDLLDLLDLLDLLLLDLDLDDLDLLL
+ 41 +
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
String Substitution Procedure Add New String
End
Selection
Add
String
Character(s)
End
String
End
Format
+ 37
ANGKCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFDGGIK
AKCBPJCJGIIJCMCEHIIJCDNNLK
AEFBJLBGMHPLMJHPNALEBLNEGK
AAPHBAJJDECDIMLOHFEABEPBDK
AHLFBJKMHHIKGLHMLAGMAEELLK
DLLDDDDLLLDLLLLDDLLDDLDLDL
+
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+ 34 + 33 +
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Output message: <43D7T7LOGICproduct43>
CONFIGURATION USING CODE SYMBOLS
107
String Substitution Procedure
a) Define String to be Substituted
Substitute String
APAKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJAKEDHGKK
AOJDPBCJGIIJCMCEGOLKBIGLCK
AIFBJLBGMHPLNKFOPDLBPKNKOK
AAPHBAJICGBMGPOCHHEBNAMFHK
AHLFAKKFLHGOGEAFKMLMANFIKK
DDLLDLLDLLDLLLLDLDLDDLDLLL
Read the Hex value from the Hex/Numeric table
identifying the characters of the string to be substituted.
Valid values are in the range 00-7F.
b) Define Substituting String
Substituting String
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
Read the Hex value from the Hex/Numeric table
identifying the characters of the substituting string. Valid
values are in the range 00-7F.
c) End Selection
End Selection
ANGKCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFDGGIK
AKCBPJCJGIIJCMCEHIIJCDNNLK
AEFBJLBGMHPLMJHPNALEBLNEGK
AAPHBAJJDECDIMLOHFEABEPBDK
AHLFBJKMHHIKGLHMLAGMAEELLK
DLLDDDDLLLDLLLLDDLLDDLDLDL
Read the code to end the selection.
d) EITHER Add String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
To add a new string of characters read the code and
follow the procedure described on page 111;
OR End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
GRYPHON™ D432/D432E
108
FIELD DELETION
To complete this procedure proceed as follows:
Define Format
1, 2, 3, 4, or 5
End Format Definition
Add String?
Delete Field
Add String?
Add new
String
Add
YES
Add new
String Add
NO
NO
YES
Delete
Example
Decoded code: <DATALOGICproduct>
Formatting procedure: Delete First Field + Delete Second Field + Add New String.
Field Deletion Procedure
Delete 1st Field Starting Character 1st Field Ending Character
AMHLGLEKHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJALEAHEIK
AKCBPJCJGIIJCMCEHILFPJABJK
AEFBJLBGMHPKNIFAMGIDOBPFGK
AAPHBAJIDBDPFCPCBLBBIHELFK
AGLFAMKAJEOIKHFKIGKEMGNILK
DDLLLLLDLLLLLLLDDLDDDLDLLL
+
AOCKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJALEDGHKK
AOJDPBCJGIIJCMCEGNOJDNBPEK
AIFBJLBGMHPLNIDFFINJEEAJOK
AAPHBAJICCGOBPPLKMDJODJLBK
AHLFALLKHHHKCDLGLEPOABEKIK
DLDLDLLDLDDLLLLDDDLDDLDLLL
+ 41 +
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
+ 4C + 4F +
Field Deletion Procedure
End Selection Loop 2
nd Field Starting Character 2nd Field Ending Character
+
ANGKGKCKFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEDCEIK
AKCBPJCJGIIJCMCFGNKOLDHPNK
AEFBJLBGMHPKNNBLBIKDNOPEGK
AAPHBAJICGHGMLMOIAGMOMCHFK
AELFBKMIOONGGOJPDEMGAAGJKK
DLLDLDLLDLDLLLLDLDDDDLDLDL
+
AMGNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEABEIK
AKCBPJCJGIIJCMCFHJINBKHDLK
AEFBJLBGMHPKNMAOENDIPHLFGK
AAPHBAJIDBCEANCBBFLCKCCPBK
AGLEBJMGIGHAKOKOCOEIAEIKIK
DDLLLLDDDLDLLLLDLLDDDLDLDL
+
AOCKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJALEDGHKK
AOJDPBCJGIIJCMCEGNOJDNBPEK
AIFBJLBGMHPLNIDFFINJEEAJOK
AAPHBAJICCGOBPPLKMDJODJLBK
AHLFALLKHHHKCDLGLEPOABEKIK
DLDLDLLDLDDLLLLDDDLDDLDLLL
+ 70 + 72
+
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
+
Field Deletion Procedure Add New String
End Selection Add String Character(s) End String End Format
+ 75 +
ANGKGKCKFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEDCEIK
AKCBPJCJGIIJCMCFGNKOLDHPNK
AEFBJLBGMHPKNNBLBIKDNOPEGK
AAPHBAJICGHGMLMOIAGMOMCHFK
AELFBKMIOONGGOJPDEMGAAGJKK
DLLDLDLLDLDLLLLDLDDDDLDLDL
+
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+ 35 + 31 +
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Output message: <DGICct51>
CONFIGURATION USING CODE SYMBOLS
109
Field Deletion Procedure
a) Delete Field
Delete
AMHLGLEKHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJALEAHEIK
AKCBPJCJGIIJCMCEHILFPJABJK
AEFBJLBGMHPKNIFAMGIDOBPFGK
AAPHBAJIDBDPFCPCBLBBIHELFK
AGLFAMKAJEOIKHFKIGKEMGNILK
DDLLLLLDLLLLLLLDDLDDDLDLLL
Read the code to enable the command deleting the field.
b) Define Field Starting Character
Field Starting Character
AOCKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJALEDGHKK
AOJDPBCJGIIJCMCEGNOJDNBPEK
AIFBJLBGMHPLNIDFFINJEEAJOK
AAPHBAJICCGOBPPLKMDJODJLBK
AHLFALLKHHHKCDLGLEPOABEKIK
DLDLDLLDLDDLLLLDDDLDDLDLLL
Read the Hex value from the Hex/Numeric table
identifying the starting characters. Valid values are in the
range 00-7F.
c) Define Field Ending Character
Field Ending Character
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
Read the Hex value from the Hex/Numeric table
identifying the ending character/s. Valid values are in the
range 00-7F.
d) End Field Selection
End Selection
ANGKGKCKFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEDCEIK
AKCBPJCJGIIJCMCFGNKOLDHPNK
AEFBJLBGMHPKNNBLBIKDNOPEGK
AAPHBAJICGHGMLMOIAGMOMCHFK
AELFBKMIOONGGOJPDEMGAAGJKK
DLLDLDLLDLDLLLLDLDDDDLDLDL
Read the code to end the field selection.
e) (optional) Select Other Fields to be Deleted
Loop
AMGNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEABEIK
AKCBPJCJGIIJCMCFHJINBKHDLK
AEFBJLBGMHPKNMAOENDIPHLFGK
AAPHBAJIDBCEANCBBFLCKCCPBK
AGLEBJMGIGHAKOKOCOEIAEIKIK
DDLLLLDDDLDLLLLDLLDDDLDLDL
Read the following code and repeat the procedure from
step b for each field to be deleted:
GRYPHON™ D432/D432E
110
f) EITHER Add String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
To add a new string of characters read the code and
follow the procedure described on page 111;
OR End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
CONFIGURATION USING CODE SYMBOLS
111
ADD NEW STRING
a) Define New String
String Character
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
Read the Hex value from the Hex/Numeric table
identifying the starting characters. Valid values are in the
range 00-7F.
b) End String and Define Procedure
End String Plus Procedure
ANGKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFHDFIK
AKCBPJCJGIIJCMCFHLOLBOBPNK
AEFBJLBGMHPKMMDHGPDFPODGGK
AAPHBAJICGFKCICAIFKLCABPDK
AHKFBKNCOEFKAKAABKBIIHHKLK
DLLDLDDLDLDLLLLDLLLDDLDLDL
Read the code to end the string selection and continue
defining a new procedure belonging to Method 1.
OR End String and Format
End String & Format
ANGKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFFBEIK
AKCBPJCJGIIJCMCFGOPKHDHBLK
AEFBJLBGMHPLNIFDFNHOMPFHGK
AAPHBAJJDFAOLDEBEDPLAFIDBK
AGLFBMNPAAFGGKBFFMECGOAIJK
DLLLLLDLLDLLLLLDLLLDDLDLDL
Read the code to end the string and the format definition.
GRYPHON™ D432/D432E
112
5.3.2 Match Conditions
By setting one or more of the following conditions it is possible to select the codes to be
formatted. Follow the given steps to define the desired condition:
MATCH WITH PREDEFINED SUBSTRING
Define Matching Substring
Match with Substring
AOCLFLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFABGIK
AKCBPJCJGIIJCMCFGLIFMPLLLK
AEFBJLBGMHPLMKALHFEAEHMGGK
AAPHBAJICAGKHAKKFDLLOGDNFK
AGKFAKLBIMBCELJEKCHMIJCJKK
DLDLLDLDLDLLLLLDDLLDDLDLDL
Read the above code and:
1. read a number in the range 1-5 corresponding to the
desired format number;
2. set the number of characters defining the matching
string in the range 00-10;
3. read the corresponding character as Hex value from
the Hex/Numeric table identifying the substring
character/s. Valid values are in the range 00-7F.
(optional) Define Substring Position
Matching Substring Position
AOCLFLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEFBGIK
AKCBPJCJGIIJCMCEHIMDBAGJPK
AEFBJLBGMHPLMIDDFPLOAMFEGK
AAPHBAJIDACKLJKHLEJEICILDK
AHKFAKJLOEKKCJCHAGKIEMFLKK
DDDLLDLDDLLLLLLDLLDDDLDLDL
Read the above code and:
1. read a number in the range 1-5 corresponding to the
desired format number;
2. read the number corresponding to the substring
position in the range 0-255;
AND/OR
MATCH CODE LENGTH
Define Code Length
Match Code Length
AOCLFLFMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFDBHIK
AKCBPJCJGIIJCMCEHPOLDEPHNK
AEFBJLBGMHPLMJEHMIMMPOKEGK
AAPHBAJJDEGGOAGMNCEOLPDLHK
AGKFAIJFBNPEGAOAPPFAGNIILK
DLDLLDLDLDDLLLLDLDDDDLDLLL
Read the above code and:
1. read a number in the range 1-5 corresponding to the
desired format number;
2. read the number in the range 0-255;
CONFIGURATION USING CODE SYMBOLS
113
AND/OR
MATCH SYMBOLOGY
Define Code Symbology
Match Symbology
AOCLFLFMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEGBHIK
AKCBPJCJGIIJCMCFGMKNOLCFJK
AEFBJLBGMHPLMLHPOCDCLFDGGK
AAPHBAJJCECGCJGBDFGBNLINBK
AHKFAILPHFEMACFDFLIEKIPKLK
DDDLLDLDDLDLLLLDDDLDDLDLLL
Read the above code and:
1. read a number in the range 1-5 corresponding to the
desired format number;
2. set the number of the matching code symbologies in
the range 0-4;
3. select the Datalogic Standard Code Identifier from
the Code Identifier Table in Appendix C.
GRYPHON™ D432/D432E
114
5.3.3 Format Enable/Disable
Format 1 Format 2
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFFGIK
AKCBPJCJGIIJCMCEHIMHGIADNK
AEFBJLBGMHPLNMANFIHIMLGEGK
AAPHBAJJDEENFCPPLHPEIPINFK
AHLFAOPLBBOIOHDICPOOENHIJK
DLLLLDLDDDLLLLLDLDLDDLDLDL
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEAFEIK
AKCBPJCJGIIJCMCFGOIMOKPBJK
AEFBJLBGMHPKMMHJIKOAIHPGGK
AAPHBAJICAAFFHBNOIOFGGHDBK
AELFANJIEINIIKHAPIIOAIIIIK
DLLLLDLDDDLLLLLDDDLDDLDLDL
0 = disabled 0 = disabled
1 = enabled 1 = enabled
Format 3 Format 4
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKEECFIK
AKCBPJCJGIIJCMCFHLMNIBIFPK
AEFBJLBGMHPLNIEABDLCBDLHGK
AAPHBAJICADLMIGJJAHBBHKDBK
AHKFAMOGHAIKCDGMGKCGAKOKJK
DLDLLDLDDDLLLLLDDDDDDLDLLL
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALFBCHIK
AKCBPJCJGIIJCMCEGNIGADHHLK
AEFBJLBGMHPKMIDEMBCKFPCFGK
AAPHBAJJDEHDMNILMPGAPOFNFK
AEKFAPIFCJLKEOCELNEGEPBKIK
DLDLLDLDDDLLLLLDLDDDDLDLLL
0 = disabled 0 = disabled
1 = enabled 1 = enabled
Format 5 Disable All Formats
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJALFHAEIK
AKCBPJCJGIIJCMCEHMLKKMMJNK
AEFBJLBGMHPKMPEADEFGPJJEGK
AAPHBAJJCHDEJECECCCMJGDPDK
AFKFAKJMOPIMOEGBBIDKMGGLKK
DLDLLDLDDDLLLLLDDDDDDLDLLL
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFDHFIK
AKCBPJCJGIIJCMCEGJPLMHLNLK
AEFBJLBGMHPLNLHJKNAEGNNFGK
AAPHBAJJCHAKALFAFKLIOHOPDK
AGLFALOCNHNOENHNIKJCMEAJLK
DLLLLDLDDDLLLLLDDDLDDLDLDL
0 = disabled
1 = enabled
CONFIGURATION USING CODE SYMBOLS
115
5.3.4 Mismatch Result
The result of each format may be set in case the match conditions previously
selected are not satisfied.
Once the desired formats have been enabled and a code has been read, the results
corresponding to each format will be concatenated together and transmitted in the
output message. For this reason, it is strongly advised to set the mismatch result for
each format.
Example
Decoded Code: <DATALOGICproduct>
Format definition:
Format Enable/Disable Match Condition Function Mismatch Result
Format 1 Enabled Code having a length
of 16 characters
Select field from
position1 to
position3
No string
Format 2 Disabled / / /
Format 3 Enabled Code having a length
of 25 characters
Substitute string
"ab" with string
"12"
Unformatted read
code
Format 4 Enabled Code having the
substring "AT" in
position 2
Insert string
"789" in position
7
Unformatted read
code
Format 5 Enabled Code belonging to the
PDF417 symbology
Delete string
"DA" and "pr"
Unformatted read
code
Output message: <DATDATALOGICproductDATALO789GICproductDATALOGICproduct>
Format 1 Format 3 Format 4 Format 5
Define Mismatch Result
Mismatch Result
AOCLFLHODNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFGEIK
AKCBPJCJGIIJCMCFHPJPBJONNK
AEFBJLBGMHPKMJGONHLFIIIHGK
AAPHBAJJCDBDNKDEDGEINLGHBK
AFLFAMLJPMLKOLLPNDLGCBAIIK
DLDLLDLDDLLLLLLDDDLDDLDLDL
Read the above code and:
1. read a number in the range 1-5 corresponding to the
desired format number;
2. 0 = empty string as output
1 = unformatted read code as output.
GRYPHON™ D432/D432E
116
6 REFERENCES
6.1 RS232 – USB COM
6.1.1 ACK/NACK Protocol
The transmission protocol takes place between reader and Host. Once the reader
has read a code, it emits a good read beep and passes its data to the Host.
When ACK/NACK is disabled, there is no control from reader to Host transmission.
When ACK/NACK is enabled, the Host sends an ACK character (06 HEX) in the case
of good reception or the NACK character (15 HEX) requesting re-transmission, in the
case of bad reception.
If the reader does receive an ACK, no signal will be emitted; whereas, if it does not
receive an ACK or NACK, it will emit a wrong reception tone after a few seconds.
NOTE
Gryphon™ D432/D432E reader cannot read barcodes while waiting for
the Host response.
6.1.2 RX Timeout
This parameter can be used to automatically end data reception from the Host after
the specific period of time.
If no character is received from Host, after the timeout expires, any incomplete string
(any string not terminated by <CR>) is flushed from the device buffer.
REFERENCES
117
6.2 USB KEYBOARD
6.2.1 Keyboard Speed
This parameter manages the transmission speed of characters to the Host. A fast
Keyboard Speed allows rapid transmission of a great amount of characters (for
example 2D codes), but it might not be compatible with slower systems.
6.3 CODE SELECTION
6.3.1 Issue Identical Codes
This parameter manages the code transmission when more than one code
containing the same information is detected in a single scan.
All identical codes are transmitted to the Host when the parameter is enabled; if
disabled, only one of the identical codes is sent.
6.4 READING PARAMETERS
6.4.1 Safety Time
Safety time prevents the device from immediately decoding the same code more
than once. A timeout can be set up to 9.9 seconds before the decoder will accept the
same code. Reading is immediate if the code changes.
The safety time parameter is not applicable when all codes per scan is enabled or
when setting one read per cycle in normal (hardware) trigger operating mode.
GRYPHON™ D432/D432E
118
6.5 CONFIGURATION EDITING COMMANDS
The following commands carry out their specific function and do not require reading
the Enter or Exit and Save Configuration codes.
Command Description
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
Restore Gryphon™ D432/D432E reader default
configuration:
AMHKGPBOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECBEIK
AKCBPJCJGIIJCMCEGNOKAKPHJK
AEFBJLBGMHPKMKEPKAKIOABEGK
AAPHBAJICFGFIBIPPOECDKIJBK
AFKFBMIKBFKGOMKNNGLKGNNIKK
DLLDLDLLDDLLLLLDDLDDDLDLLL
Transmit the Gryphon™ D432/D432E reader
Software release.
AMHOGPBOFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJAKEACHIK
AKCBPJCJGIIJCMCEGNLFCLIPJK
AEFBJLBGMHPKMKFLEFBNBOKHGK
AAPHBAJIDGHLDGOMCOHJGAAFDK
AGKFALIMCNPOKGIEIBDIOGHIKK
DLLLLLLLDDDLLLLDLLLDDLDLDL
Transmit the Gryphon™ D432/D432E current
configuration in ASCII format to Host.
AMHOHMEMHNGNENEIEPANHOGOCK
AHPBIBAMDKEOFMHMLJALFHGFJK
AKCBPJCJGIIJCMCEHJIPFPFLNK
AEFBJLBGMHPLNOBPKFGHKGAGGK
AAPHBAJIDBEDNCGFJDBLCCBHFK
AELFAJJEFKLIMPLCLLEIOMIJLK
DDDLLLLDLDLLLLLDDDLDDLDLDL
Transmit the Gryphon™ D432/D432E current
data format configuration in ASCII format to Host.
TEST CODE SYMBOLS
119
7 TEST CODE SYMBOLS
Use these 1D and 2D test symbols to check that the reader is imaging and decoding
properly, according to your configuration.
UPC-A
1 52637 48509 2
EAN-13
1 234567 000992
Code 39 (Standard)
17162
Code 128
test
GRYPHON™ D432/D432E
120
QR
PDF417
DataMatrix (Normal)
DataMatrix (Inverse)
MAINTENANCE
121
8 MAINTENANCE
You do not need to perform regular preventative maintenance on the Gryphon™
D432/D432E reader.
Do not try to open the case, because you might damage the interior electronic
components and such action voids the warranty.
You can keep your reader in good operating condition by:
• periodically cleaning the reading window using water or a mild detergent solution
and a soft cloth or tissue.
• watching for any damage to the housing.
CAUTION
Do not use abrasive cleaning agents on the reader's window to
avoid scratches. Do not use solvents on the housing or window to
avoid damage. Do not submerge the reader in water. It is not
waterproof.
GRYPHON™ D432/D432E
122
9 TECHNICAL FEATURES
GRYPHON™ D432/D432E Common Features
Electrical Features
Operating Voltage 4.75 to 5.25 V
Power Consumption
@ 5V (Stand-by) 120 mA
@ 5V (Typical) 245 mA
@ 4.75V (Peak current) 330 mA
Communications Features
Standard Interfaces RS232, Keyboard emulation AT IBM, USB COM emulation, USB
Keyboard emulation
Proprietary Interfaces USB Bulk, USB Generic HID
Environmental Features
Operating Temperature 0° to+ 50 °C (+32° to +122 °F)
Storage Temperature -20° to +70 °C (-4° to +158 °F)
Humidity 0 to 95% NC
Drop Resistance IEC 68-2-32 Test ED – 1.5 m.
Mechanical Features
Dimensions 179 x 81 x 98 mm (7.04 x 3.18 x 3.85 inches)
Weight 198 g (6.9 oz.) without cable
Decoding Capability
1D Interleaved 2 of 5, Code 39, Code 32, Code 128, EAN 128,
Code 93, UPC/EAN/JAN, Codabar, RSS
2D PDF417, Micro PDF417, Macro PDF417, Maxicode, DataMatrix
(ECC200), QR, Composite Codes
Postal Codes POSTNET, PLANET, Japan Post, Australia Post, KIX Code,
Royal Mail Code (RM4SCC)
Imaging Option
Image 640 x 480 pixel format (VGA)
320 x 240 pixel format (CIF);
Graphic Format JPEG, 256 gray levels
BMP, 2, 16, 256 gray levels
TIFF, 2, 16, 256 gray levels
Optical Features
Sensor 640 x 480 pixel element, 2D CMOS Array
Illuminator LED array
Wavelength In the range 630 ~ 670 nm
Max. LED Output Power 0.33 mW
LED Safety Class Class 1 to EN 60825-1
Aiming System Visible Laser Diode
Wavelength 650 nm
Laser Safety Class Class 2 - EN 60825-1; Class II CDRH
Ambient light 0 - 100000 lux (artificial)
TECHNICAL FEATURES
123
GRYPHON™ D432
Optical Features
Focus distance 115 mm
Field of view 21.8° (H) x 16.7° (V)
Horizontal field of view at
distance (d) in mm
0.4d + 12
Vertical field of view at
distance (d) in mm
0.3d + 9
Max Resolution Linear codes - mm (mils) DataMatrix – mm (mils)
0.10 (4) 0.17 (6.6)
Depth of field*
1D (linear): X-dimension
mm (mils)
Symbol size
cm (in)
DOF
cm (in)
Code39 0.13 (5) 1.2 (0.47) 7.0 to 13.5
(2.75 to 5.31)
0.5 (20) 3.2 (1.26) 6.5 to 31.0
(2.55 to 12.20)
EAN13 0.33 (13) 3.1 (1.22) 6.5 to 24.5
(2.55 to 9.64)
2D: X-dimension
mm (mils)
Symbol size
cm (in)
DOF
cm (in)
POSTNET 0.5 (20) 4.0 x 0.4
(1.57 x 0.16)
11.5 to 30.0
(4.53 to 11.81)
PDF417 0.13 (5) 1.1 x 0.9
(0.43 x 0.35)
8.0 to 14.0
(3.14 to 5.51)
0.17 (6.6) 1.4 x 1.2
(0.55 x 0.47)
5.5 to 17.5
(2.16 to 6.88)
0.25 (10) 2.2 x 1.8
(0.86 x 0.71)
3.5 to 22.5
(1.37 to 8.85)
QR 0.25 (10) 0.7 x 0.7
(0.27 x 0.27)
6.0 to 14.3
(3.50 to 20.0)
0.38 (15) 1.1 x 1.1
(0.43 x 0.43)
4.0 to 20.5
(1.57 to 8.07)
DataMatrix 0.19 (7.5) 0.8 x 0.8
(0.31 x0.31)
8.2 to 11.2
(3.22 to 4.40)
0.25 (10) 0.8 x 0.8
(0.31 x 0.31)
5.5 to 15.0
(2.16 to 5.90)
0.38 (15) 1.0 x 1.0
(0.39 x 0.39)
5.5 to 20.5
(2.16 to 8.07)
Skew ±40°
Pitch ±35°
Rotation 360°
Print Contrast (Min.) 23%
* Reading distances are measured from the nose of the reader.
GRYPHON™ D432/D432E
124
GRYPHON™ D432E
Optical Features
Focus distance 65 mm
Field of view 20° (H) x 15° (V)
Horizontal field of view at
distance (d) in mm 0.32d + 8.67
Vertical field of view at
distance (d) in mm 0.24d + 6.50
Max Resolution Linear codes - mm (mils) DataMatrix – mm (mils)
0.05 (2) 0.10 (4)
Depth of field*
1D (linear): X-dimension
mm (mils)
Symbol size
cm (in)
DOF
cm (in)
Code39 0.076 (3) 1.2 x 4.0
(0.47 x 1.57)
4.9 to 7.2
(1.92 to 2.83)
0.13 (5) 1.2 x 4.0
(0.47 x 1.57)
4.0 to 8.7
(1.57 to 3.42)
2D: X-dimension
mm (mils)
Symbol size
cm (in)
DOF
cm (in)
PDF417 0.76 (3) 0.65 x 0.55
(0.26 x 0.22)
4.5 to 7.2
(1.77 to 2.83)
0.25 (10) 2.2 x 1.8
(0.86 x 0.71)
3.5 to 12.0
(1.37 to 4.72)
QR 0.13 (5) 0.6 x 0.6
(0.23 x 0.23)
5.0 to 7.2
(1.96 to 2.83)
DataMatrix 0.13 (5) 0.5 x 0.5
(0.20 x 0.20)
5.2 to 7.2
(2.04 to 2.83)
0.25 (10) 0.8 x 0.8
(0.31 x 0.31)
3.5 to 9.5
(1.37 to 3.74)
Skew ±40°
Pitch ±35°
Rotation 360°
Print Contrast (Min.) 27%
* Reading distances are measured from the nose of the reader.
TECHNICAL FEATURES
125
9.1 INDICATORS
9.1.1 Gryphon™ D432/D432E LED Indicators
The Gryphon™ D432/D432E has one green LED indicator signaling the following
reader functions:
STATUS BEHAVIOR
Power ON The LED lights up for 2 seconds to signal the
power supply is present.
Power ON with USB (without
external power supply)
The LED blinks until the Host accepts the device.
Normal Function The LED lights up after a good decoding and will
switch off only at the next trigger press.
9.1.2 Beeper
The Gryphon™ D432/D432E basic software provides beeper signals for good/wrong
reading and for indicating errors. Its tone, volume and duration can be directly
configured by using the codes given on page 65.
The application program can also manage the beeper (User Defined Beeper) when
the reader is controlled by a Host PC. It is possible to activate the beeper by sending
a command from the Host to the reader via the current communication interface.
NOTE
The configuration of the User Defined Beeper does not influence or
change the functioning of the beeper managed by the
Gryphon™ D432/D432E basic software.
9.1.3 Good Read Spot
It is possible to enable a green good-read spot, which will be projected in the field of
view when the reading is successful.
GRYPHON™ D432/D432E
126
A HOST CONFIGURATION STRINGS
In this section we provide a description of how to modify the device configuration
using serial strings sent from the Host.
This method requires the RS232, USB-Com, USB Bulk or USB Generic HID
interface.
The device configuration can be changed by receiving commands from the Host
through the current interface. When this method is used, the programming sequence
format is the following:
Command
Character sequence in following tables
CR$-$+
Carriage return character (0D Hex.)
Enter configuration environment
Exit and Save configuration
Example:
Beeper tone 1
Beeper low intensity
GBB1 $- CR
Carriage return character (0D Hex.)
Exit and save new configuration
GBA1
$+
Enter configuration environment
Each configuration parameter setting removes the condition previously active for that
parameter.
NOTE
Configuring some configuration commands, such as those of
advanced formatting, through strings may result very complex. For this
reason they are not provided in the following tables but can be
configured by using VisualSetup configuration program or referring to
the related section in chapter 5 of this manual.
HOST CONFIGURATION STRINGS
127
SERIAL CONFIGURATION STRINGS
ENTER/EXIT CONFIGURATION COMMANDS
DESCRIPTION STRING
Enter Configuration $+
Exit and Save Configuration $-
Restore Default $+$*
Transmit Software Release $+$!
Transmit Device Configuration in ASCII $?$&
These commands do not require $-
INTERFACE SELECTION
DESCRIPTION STRING
RS232 Standard CPA0
WEDGE for IBM AT CPA1
USB USB COM CPA3
USB-KBD CPA4
USB Bulk CPA2
USB Generic HID CPA5
RS232
DESCRIPTION STRING
Baud rate 1200 DAA00
2400 DAA01
4800 DAA02
9600 DAA03
14400 DAA04
19200 DAA05
38400 DAA06
57600 DAA07
115200 DAA08
Parity none DBA0
even DBA2
odd DBA1
Data bits 7 DCA0
8 DCA1
Stop bits 1 DCB0
2 DCB1
Handshake none DDA0
RTS/CTS DDA2
XON/XOFF DDA1
ACK/NACK Protocol disabled DDB0
enabled DDB1
GRYPHON™ D432/D432E
128
RS232
DESCRIPTION STRING
FIFO disabled DDC0
enabled DDC1
RX Timeout DEB00 - DEB99
Intercharacter Delay DEA00 - DEA99
Intercode Delay DEC00 - DEC99
USB
DESCRIPTION STRING
USB-COM
Handshake none UDA0
RTS/CTS UDA2
XON/XOFF UDA1
ACK/NACK Protocol disabled UDB0
enabled UDB1
FIFO disabled UDC0
enabled UDC1
RX Timeout DEB00 - DEB99
Intercharacter Delay UEA00 - UEA99
Intercode Delay UEC00 - UEC99
HOST CONFIGURATION STRINGS
129
DATA FORMAT
DESCRIPTION STRING
Data Format Restore Default EZ0
SYMBOLOGY INDEPENDENT PARAMETERS
Code Identifier disabled EAA0
AIM standard Code ID EAA2
Code Length disabled ECA0
enabled ECA1
Set Headers no header EDA00
one character EDA01
x
two characters EDA02
xx
three characters EDA03
xxx
four characters EDA04
xxxx
five characters EDA05
xxxxx
six characters EDA06
xxxxxx
seven characters EDA07
xxxxxxx
eight characters EDA08
xxxxxxxx
nine characters EDA09
xxxxxxxxx
ten characters EDA10
xxxxxxxxxx
Headers disabled EDB0
enabled EDB1
Set Terminators no terminator EEA00
one character EEA01
x
two characters EEA02
xx
three characters EEA03
xxx
four characters EEA04
xxxx
five characters EEA05
xxxxx
six characters EEA06
xxxxxx
seven characters EEA07
xxxxxxx
eight characters EEA08
xxxxxxxx
nine characters EEA09
xxxxxxxxx
ten characters EEA10
xxxxxxxxxx
Terminators disabled EEB0
enabled EEB1
x, a
= HEX values representing an ASCII character.
x
= Hex value from 00 to 7F
CAMERA CONTROL
DESCRIPTION STRING
Exposure Mode fixed FFA0
automatic (entire image) FFA1
automatic (central part of image) FFA2
automatic for highly reflective surfaces FFA3
GRYPHON™ D432/D432E
130
CODE SELECTION
DESCRIPTION STRING
Disable All Symbologies AZA0
Disable All Linear Symbologies AXA0
Disable All 2D Symbologies AYA0
Issue Identical Codes disabled AWB0
enabled AWB1
LINEAR SYMBOLOGIES
UPC/EAN/JAN disabled AEA0
enabled AEA1
Add-on disabled AEB0
enabled AEB1
UPCE extension enabled AEC0
disabled AEC1
Code 39 Standard disabled ABA0
no ckeck digit control ABA1
ckeck digit control without transmission ABA2
ckeck digit control and transmission ABA3
Full ASCII disabled ABB0
enabled ABB1
Code Len Check disabled ABC0
enabled ABC1
Minimum Code Length ABD
d
Maximum Code Length ABE
d
Start/Stop Char TX enabled ABF0
disabled ABF1
Code 32 disabled ABL0
enabled ABL1
Interleaved 2/5 disabled ACA0
enabled – no check digit control ACA1
enabled – check digit control and without transmission ACA2
enabled – check digit control and transmission ACA3
Code Len Check disabled ACB0
enabled ACB1
Minimum Code Length ACC
d
Maximum Code Length ACD
d
Codabar disabled ADA0
enabled – no check digit control ADA1
enabled – check digit control and without transmission ADA2
enabled – check digit control and transmission ADA3
Code Len Check disabled ADB0
enabled ADB1
Minimum Code Length ADC
d
Maximum Code Length ADD
d
d
= a number from the HEX/Numeric Table (in the range 001-255)
HOST CONFIGURATION STRINGS
131
CODE SELECTION
DESCRIPTION STRING
LINEAR SYMBOLOGIES
Code 128 disabled AAA0
enabled AAA1
Code Len Check disabled AAB0
enabled AAB1
Minimum Code Length AAC
d
Maximum Code Length AAD
d
EAN 128 disabled AOA0
enabled AOA1
Code Len Check disabled AOB0
enabled AOB1
Minimum Code Length AOC
d
Maximum Code Length AOD
d
Code 93 disabled AFA0
enabled AFA1
Code Len Check disabled AFB0
enabled AFB1
Minimum Code Length AFC
d
Maximum Code Length AFD
d
RSS Family RSS Expanded disabled AMA0
enabled AMA1
RSS Limited disabled AMB0
enabled AMB1
RSS 14 disabled AMC0
enabled AMC1
RSS Expanded disabled AMD0
Stacked enabled AMD1
RSS 14 Stacked disabled AME0
enabled AME1
d
= a number from the HEX/Numeric Table (in the range 001-255)
GRYPHON™ D432/D432E
132
CODE SELECTION
DESCRIPTION STRING
2D SYMBOLOGIES
PDF417 disabled AGA0
enabled AGA1
Macro PDF417 unbuffered mode AVB0
buffered mode AVB1
Micro PDF417 disabled AGB0
enabled AGB1
DataMatrix disabled AHA0
enabled AHA1
Minimum Code Length AHC
e
Maximum Code Length AHD
e
Rectangular Style disabled AHE0
enabled AHE1
QR Family disabled AIA0
enabled AIA1
Postal Codes all disabled ALA0
Australian Post - enabled ALA1
Japan Post - enabled ALA2
PLANET - enabled ALA3
POSTNET - enabled ALA4
POSTNET with B and B’ - enabled ALA5
POSTNET and PLANET - enabled ALA6
POSTNET with B and B’ and PLANET - enabled ALA7
KIX Code - enabled ALA8
Royal Mail Code (RM4SCC) - enabled ALA9
Maxicode Mode 0 disabled AJL0
enabled AJL1
Mode 1 disabled AJM0
enabled AJM1
Mode 2 disabled AJN0
enabled AJN1
Mode 3 disabled AJO0
enabled AJO1
Mode 4 disabled AJP0
enabled AJP1
Mode 5 disabled AJQ0
enabled AJQ1
Mode 6 disabled AJR0
enabled AJR1
Composite Code disabled ANA0
enabled ANA1
Discard Linear disabled ANB0
Part enabled ANB1
e
= a number from the HEX/Numeric Table (in the range 0001-3600)
HOST CONFIGURATION STRINGS
133
READING PARAMETERS
DESCRIPTION STRING
Trigger Mode trigger level BAA0
trigger pulse BAA1
Trigger Type normal trigger BAB0
software trigger BAB1
Flash On Duration BF0
f
Flash Off Duration BF1
f
Beeper Tone tone 1 GBA1
tone 2 GBA2
tone 3 GBA3
tone 4 GBA4
Beeper Volume off GBB0
low GBB1
medium GBB2
high GBB3
Beeper Duration GBC
f
Reads per Cycle one read per cycle BCA0
multiple reads per cycle BCA1
Scan Timeout BEA
f
User Defined Beeper Tone tone 1 GBD1
tone 2 GBD2
tone 3 GBD3
tone 4 GBD4
User Defined Beeper Volume off GBE0
low GBE1
medium GBE2
high GBE3
User Defined Beeper Duration GBF
f
Perform User Defined Beep∗∗ $?GGG
CODE ORDERING AND SELECTION
Code per Scan one code per scan BCB0
all codes per scan BCB1
Central Code Transmission disabled OAA0
enabled OAA1
Order by Code Length disabled OAB0
enabled - increasing order OAB1
enabled - decreasing order OAB2
f
= a number from the HEX/Numeric Table (in the range 01-99)
∗∗ this command carries out its specific function and does not need $+ and $-.
GRYPHON™ D432/D432E
134
READING PARAMETERS
DESCRIPTION STRING
AUTOSCAN
Autoscan Mode disabled BBA0
enabled in normal mode BBA1
enabled in pattern mode BBA2
Autoscan Aiming System disabled BBB0
enabled BBB1
Autoscan Hardware Trigger disabled BBC0
enabled BBC1
Autoscan Illumination System disabled BBD0
enabled BBD1
Safety Time disabled BGA0
enabled BGA1
Safety Time Duration BGB
f
Stand Autoscan Mode disabled BBE0
normal BBE1
pattern BBE2
Aiming System Delay disabled BLA00
enable short BLA03
enable medium BLA06
enable long BLA10
Good Read Spot disabled BIA0
enable short BIA1
enable medium BIA2
enable long BIA3
f
= a number from the HEX/Numeric Table (in the range 01-99)
ADVANCED IMAGE CAPTURE
DESCRIPTION STRING
IMAGE PRESET 1
Basic Configuration
Image Format Bitmap format IAA0
JPEG format IAA1
TIFF format IAA2
Resolution full resolution (640x480) IAB0
quarter resolution (320x240) IAB1
JPEG Quality Factor IAC
g
g
= a number from the HEX/Numeric Table (in the range 000-100)
HOST CONFIGURATION STRINGS
135
ADVANCED IMAGE CAPTURE
DESCRIPTION STRING
IMAGE PRESET 1
Advanced Configuration
Window Dimensions origin along X axis IAI
h
origin along Y axis IAL
h
width IAM
h
height IAN
h
Brightness increase IAO0IAF
i
decrease IAO1IAF1i
Contrast increase IAP0IAE
i
decrease IAP1IAE
i
Zoom 20% IAH0
40% IAH1
60% IAH2
80% IAH3
100% IAH4
120% IAH5
140% IAH6
160% IAH7
180% IAH8
200% IAH9
Color Depth 2 gray levels IAG0
16 gray levels IAG1
256 gray levels IAG2
h, i
= a number from the HEX/Numeric Table
h
= for X axis a number in the range 0-630
for Y axis a number in the range 0-470
for width a number in the range 10-640
for height a number in the range 10-480
i
= a number in the range 0-100
GRYPHON™ D432/D432E
136
ADVANCED IMAGE CAPTURE
DESCRIPTION STRING
IMAGE PRESET 2
Basic Configuration
Image Format Bitmap format IBA0
JPEG format IBA1
TIFF format IBA2
Resolution full resolution (640x480) IBB0
quarter resolution (320x240) IBB1
JPEG Quality Factor IBC
g
Advanced Configuration
Window Dimensions origin along X axis IBI
h
origin along Y axis IBL
h
width IBM
h
height IBN
h
Brightness increase IBO0IBF
i
decrease IBO1IBF1
i
Contrast increase IBP0IBE
i
decrease IBP1IBE
i
Zoom 20% IBH0
40% IBH1
60% IBH2
80% IBH3
100% IBH4
120% IBH5
140% IBH6
160% IBH7
180% IBH8
200% IBH9
Color Depth 2 gray levels IBG0
16 gray levels IBG1
256 gray levels IBG2
g, h, i
= a number from the HEX/Numeric Table
g
= a number in the range 000-100
h
= for X axis a number in the range 0-630
for Y axis a number in the range 0-470
for width a number in the range 10-640
for height a number in the range 10-480
i
= a number in the range 0-100
HOST CONFIGURATION STRINGS
137
ADVANCED IMAGE CAPTURE
DESCRIPTION STRING
IMAGE PRESET 3
Basic Configuration
Image Format Bitmap format ICA0
JPEG format ICA1
TIFF format ICA2
Resolution full resolution (640x480) ICB0
quarter resolution (320x240) ICB1
JPEG Quality Factor ICC
g
Advanced Configuration
Window Dimensions origin along X axis ICI
h
origin along Y axis ICL
h
width ICM
h
height ICN
h
Brightness increase ICO0ICF
i
decrease ICO1ICF1
i
Contrast increase ICP0ICE
i
decrease ICP1ICE
i
Zoom 20% ICH0
40% ICH1
60% ICH2
80% ICH3
100% ICH4
120% ICH5
140% ICH6
160% ICH7
180% ICH8
200% ICH9
Color Depth 2 gray levels ICG0
16 gray levels ICG1
256 gray levels ICG2
g, h, i
= a number from the HEX/Numeric Table
g
= a number in the range 000-100
h
= for X axis a number in the range 0-630
for Y axis a number in the range 0-470
for width a number in the range 10-640
for height a number in the range 10-480
i
= a number in the range 0-100
GRYPHON™ D432/D432E
138
ADVANCED IMAGE CAPTURE
DESCRIPTION STRING
IMAGE PRESET 4
Basic Configuration
Image Format Bitmap format IDA0
JPEG format IDA1
TIFF format IDA2
Resolution full resolution (640x480) IDB0
quarter resolution (320x240) IDB1
JPEG Quality Factor IDC
g
Advanced Configuration
Window Dimensions origin along X axis IDI
h
origin along Y axis IDL
h
width IDM
h
height IDN
h
Brightness increase IDO0IDF
i
decrease IDO1IDF1
i
Contrast increase IDP0IDE
i
decrease IDP1IDE
i
Zoom 20% IDH0
40% IDH1
60% IDH2
80% IDH3
100% IDH4
120% IDH5
140% IDH6
160% IDH7
180% IDH8
200% IDH9
Color Depth 2 gray levels IDG0
16 gray levels IDG1
256 gray levels IDG2
g, h, i
= a number from the HEX/Numeric Table
g
= a number in the range 000-100
h
= for X axis a number in the range 0-630
for Y axis a number in the range 0-470
for width a number in the range 10-640
for height a number in the range 10-480
i
= a number in the range 0-100
PROGRAMMING FOR EXPERT USERS
139
B PROGRAMMING FOR EXPERT USERS
This document is addressed to expert users who are familiar with software
programming languages and want to define a personalized code formatting. The
provided programming language allows creating either simple or complex formatting
expressions by means of the basic functions connected together through the
following operators: (, ), -, +.
The syntax to be used to transmit the expressions to the Gryphon™ D432/D432E is
the following:
$+ELB<n>formatting expression<ETX>$-
where:
− <n> is a number in the range 1-5 corresponding to the format to be defined;
− <ETX> is the conventional character used as terminator of the command;
− the formatting expression uses ASCII characters when containing text strings.
For this reason, the string must be inserted between two quotation marks. The
following example shows the ASCII conversion of the "ABC" string:
$+ELB1S414243T+#DS^C$-.
FUNCTION DESCRIPTION
All the functions and conventions to be used within the formatting expressions are
listed below:
FUNCTION NAME DESCRIPTION
FSTR Searches for a defined substring by its starting and ending
string.
FLSTR Searches for a defined substring by its starting string and its
length.
SSTR Extracts a defined substring from the original string.
FPOS Searches for a position of a defined substring within the
original string.
LSTR Returns a string length.
ISTR Insert a substring in the original string.
RSTR Substitutes a defined substring contained in the original
string with a new one.
GRYPHON™ D432/D432E
140
CONVENTIONS DESCRIPTION
+ Concatenates two strings or fields.
- Deletes a substring or a field from the original string.
#DS Returns the string which has been decoded by the library.
#F<n> Returns the result of a format which has been previously
defined. The <n> value is in the range 1-4.
FindStringByStarting&EndingChar (FSTR)
This function has the following syntax:
FSTR<source_string, string_start, string_stop, mode>Östring
This function searches for a substring having a defined starting character
("string_start") and a defined ending character ("string_stop") within the
"source_string". It returns the string you searched for, or an empty one in case of
failure.
If searching for a substring having characters already known, the "string_start" and
"string_stop" arguments must share the same value.
The "mode" argument allows managing the starting character ("string_start") and the
ending character ("string_stop"):
0 = include both starting and ending character
1 = include only starting character
2 = include only ending character
3 = discard both starting and ending character
FindStringByStartingChar&Len (FLSTR)
This function has the following syntax:
FLSTR<source_string, string_start, len, mode>Östring
This function searches for a substring having a defined starting character
("string_start") and a defined length ("len") within the "source_string". It returns the
string you searched for, or an empty one in case of failure.
If searching for a substring having a length already known, the "string_start" and
"string_stop" arguments must share the same number.
The "mode" argument allows managing the starting character ("string_start"):
0 = include starting character
1 = discard starting character
PROGRAMMING FOR EXPERT USERS
141
SelectString (SSTR)
This function has the following syntax:
SSTR<source_string, pos_start, pos_end>Östring
It extracts a substring whose characters are between "pos_start" and "pos_end" from
the "source_string".
If "pos_end" is longer than the "source_string" length, no error will be generated
since the exceeding characters are ignored.
The first character of every string is in position 1.
FindPosition (FPOS)
This function has the following syntax:
FPOS<source_string, search_string>Öposition
This function searches for a defined substring within the "source_string" and returns
its position. If the substring is not found, the returned value is 1.
StringLength (LSTR)
This function has the following syntax:
LSTR<string>Ölength
This function returns the length of the defined string.
StringConcatenation
This function has the following syntax:
string1 + string2Östring
This function allows concatenating two different strings in order to get a single string
as result.
GRYPHON™ D432/D432E
142
StringDiscard
This function has the following syntax:
string1 - string2Östring
This function discards all the strings having the same value as "string2" which can be
found in "string1". If no "string2" is found within "string1", the result returns "string1".
InsertString (ISTR)
This function has the following syntax:
ISTR<source_string, string1, position>Östring
This function inserts a new string ("string1") within the "source_string" and places it in
the defined "position".
If the value of the "position" argument is longer than "source_string" length, "string1"
will be placed after the last character of the source string.
ReplaceString (RSTR)
This function has the following syntax:
RSTR<source_string, string1, string2>Östring
This function searches for "string1" within the "source_string". All the strings having
the same value as "string1" within the "source_string" will be replaced by "string2".
If no "string1" is found in the "source_string", the result returns the "source_string".
PROGRAMMING FOR EXPERT USERS
143
Examples
The string transmitted is S12345abcdef3790T and corresponds to the #DS function,
as defined in the programming language.
1) expression Ö SSTR<#DS,1,5> + SSTR<#DS,11,15> + SSTR<#DS,6,9>
result Ö S12345f3790abcdT
2) expression Ö FSTR<#DS, S616263T, S616263T, 0> + SSTR<#DS,LSTR<#DS>
-3, LSTR<#DS>
result Ö Sabc3790T
3) expression Ö FSTR<#DS, S616272T, S616261T, 0>
result Ö ST null string
4) expression Ö #DS - FSTR<#DS, S616263T, S6566T, 0>
result Ö S123453790T
During the format definition the decoded string represented by #DS does not change.
Using Format Output in Format Definition
The input used by the above functions to define the code formatting usually
corresponds to the decoded code (#DS). Actually, the formatting expression of each
function can also format the result (output) produced by a preceding code formatting.
The format output is represented as follow:
#F<n>, where:
<n> = format number in the range 1-4
#F = format output
Being Format 5 not included in other format expression, the format number is in the
range 1-4. Furthermore, since a format expression operates upon the output of the
preceding formats, the expression defining Format 1 will never contain the result of
another format.
Example
The following expression is used to define Format 3:
#DS + FSTR<#F2, S6173T, S6263T, 0>
The expression input consists of the decoded code and the result produced by
Format 2 (#F2).
The FSTR function searches for a defined substring within the #F2 result; then, it
concatenates this substring and the decoded code. The result corresponds to #F3
output.
GRYPHON™ D432/D432E
144
C CODE IDENTIFIER TABLE
EAN/UPC CODABAR
APCPCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEGBHIK
AKCBPJCJGIIJCMCEGOMAPFDLJK
AEFBJLBGMHPLMNBJDBAMFHOEGK
AAPHBAJJCCDBJLHEJOHAEJBBFK
AEKFAMIOGAHEOFFNJLAMEFIJKK
DLDLLLDLDLDLLLLDLDDDDLDLDL
APCPCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEEHFIK
AKCBPJCJGIIJCMCFGJKHILNJLK
AEFBJLBGMHPLMNGOJAGECBEFGK
AAPHBAJICHELJEAHOIHPKBLLFK
AFLFAIKFBDOOEJMDCFEIOGNIJK
DLLLLLDLLLLLLLLDDLDDDLDLLL
CODE 128 EAN 128
APCLGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFFDEIK
AKCBPJCJGIIJCMCEGPKEHAMLLK
AEFBJLBGMHPKNKGMHMAGPDIFGK
AAPHBAJICHAPGJKOACPJFHKLBK
AHLFAOIHKPPIGNIKBLPOMOHKJK
DLLLLLDLLLDLLLLDDLDDDLDLDL
APCPGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFHEGIK
AKCBPJCJGIIJCMCEGJKOCJLBJK
AEFBJLBGMHPLMODJKELEOGJGGK
AAPHBAJIDHCOFOGHOJOKLEHPDK
AEKFAONHFDEIAADCBCKGGBAILK
DDDLLDDLLLDLLLLDLLDDDLDLLL
CODE 93 CODE 32
APCLGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFHFGIK
AKCBPJCJGIIJCMCFGIMDAOCJJK
AEFBJLBGMHPKNKBLNNGOIFCEGK
AAPHBAJJCCHFGGNNHEPGLPABBK
AGKFAKKMNMGCMBBEKFLKGNCLKK
DLDLLLDLDLLLLLLDLDDDDLDLLL
APCPCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFBCGIK
AKCBPJCJGIIJCMCEGMNHNPOLLK
AEFBJLBGMHPLNJANKACLDPEFGK
AAPHBAJICDAPKPFIDKBFCMLPBK
AHKFAPOMHMIKOKBFOEOMOENKLK
DLLLLDDLDDLLLLLDLLLDDLDLDL
CODE 39 INTERLEAVED 2 OF 5
APCLCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFDFEIK
AKCBPJCJGIIJCMCEGKNNIGJBJK
AEFBJLBGMHPKMNFIHIJJCKFGGK
AAPHBAJIDDCOJIJBNBAGMPGLDK
AELFAPLMIADKIHKNONLEELKIJK
DDDLLLDLDDLLLLLDDLLDDLDLLL
APCLCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFBDGIK
AKCBPJCJGIIJCMCFGNLKPIHDLK
AEFBJLBGMHPKMNCPNJPBFMPHGK
AAPHBAJJDGFEJHOCKHAJCHMBDK
AFKFALJHPDKACLDDFDPAOIPJKK
DDLLLLDLLDDLLLLDLDLDDLDLDL
PDF417 MICRO PDF417
AODOCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEBAEIK
AKCBPJCJGIIJCMCFGIPGNMEDNK
AEFBJLBGMHPKNOGALBGPKNLGGK
AAPHBAJICEHBNDJJHFEKLMPFDK
AGKFAMMJMJLMMIAKCJJKCCGLIK
DDDLLLDLLLLLLLLDLDDDDLDLLL
AODOGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEFFHIK
AKCBPJCJGIIJCMCEGLJEOBIBLK
AEFBJLBGMHPLNLCIAOOOEIFEGK
AAPHBAJJDGAIHHAHIFKBIIBLDK
AGLFAPLHFKGMKJHGIDOOKBFKIK
DDDLDLDLDLLLLLLDDDDDDLDLLL
CODE IDENTIFIER TABLE
145
DATAMATRIX MAXICODE
AODKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCCHIK
AKCBPJCJGIIJCMCFGJJCFJLDPK
AEFBJLBGMHPLMJBFPMGFAJNHGK
AAPHBAJJCBEPCBEDOJMDKCEPHK
AFLFAOMAAGDAEANNKJGIKJJILK
DDLLLLDLDLLLLLLDDLDDDLDLLL
AODOCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEDGGIK
AKCBPJCJGIIJCMCEGPJBKCKBPK
AEFBJLBGMHPKNOBHBAAHNLBHGK
AAPHBAJJCBALNMOKADEFFEFPDK
AHLFAIOCLKCGGEJEJHNOIBDKLK
DDLLLLDLDLDLLLLDDLDDDLDLDL
QR AUSTRALIA POST
AODKGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFAEFIK
AKCBPJCJGIIJCMCEGOPFCHFBNK
AEFBJLBGMHPLMJGCFNANHPHGGK
AAPHBAJICEDFCODAJPMMEKOFHK
AEKFAKOLHFKKOMEDBHCMAKMJIK
DDDLLLDLLLDLLLLDLDDDDLDLDL
AODKCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFGCFIK
AKCBPJCJGIIJCMCEGLIMNBALPK
AEFBJLBGMHPLNOFGFJJCKGKFGK
AAPHBAJIDABENPAPEMDDNCCFFK
AHKFALNAFKGIAGGEOBGGIPBLIK
DLLLLLDLDDLLLLLDLDLDDLDLLL
JAPAN POST POSTNET
AODOGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFAFFIK
AKCBPJCJGIIJCMCFGPJIAAMJNK
AEFBJLBGMHPKNNEACENHBMMEGK
AAPHBAJJDBGOBGIKACNAEBJLFK
AGKFAOJAPKIACNGFKADAAGOKJK
DLDLLDDLDLLLLLLDLLDDDLDLDL
AODOCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFGDFIK
AKCBPJCJGIIJCMCFGKOBPGJDPK
AEFBJLBGMHPKMKHECAEIMFBHGK
AAPHBAJJCFEPOHLFNBCPNJFLHK
AFKFAPKLNFECMHECFGHKIDDIJK
DDLLLDDLLDDLLLLDLLLDDLDLLL
PLANET RSS
AODOGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDHIK
AKCBPJCJGIIJCMCEGIPPHOCLPK
AEFBJLBGMHPKNNDHIFLPGKGFGK
AAPHBAJIDEBEBJPJHENPKJDBFK
AHLFAKLLIJBKIBPLBOHEKFLLKK
DLLLLDDLLLDLLLLDDDDDDLDLLL
AODOCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFEFHIK
AKCBPJCJGIIJCMCEGNIGIIHBNK
AEFBJLBGMHPKMKADIBCALDLGGK
AAPHBAJICADFOIMGKHCADBPBHK
AELFALIAKGNIGLNMOIDOCAGJKK
DDDLLDDLDDLLLLLDDDLDDLDLDL
KIX CODE RM4SCC
AODKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEFBGIK
AKCBPJCJGIIJCMCFGLIFHDGDNK
AEFBJLBGMHPLNNABGNECGBHGGK
AAPHBAJICAHBBFGPENKGMHOBDK
AGLFANKCBKMOEPJFNGIIAIMLKK
DDDLLDDLDDDLLLLDDDLDDLDLLL
AODKGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEHHEIK
AKCBPJCJGIIJCMCEGMOCANIBPK
AEFBJLBGMHPLNNHGMMCKBHNHGK
AAPHBAJJCFALBKBMDLKJCPELDK
AHKFAJIJGJFEODALGIMMKLJKJK
DDLLLDDLLDLLLLLDLLLDDLDLDL
GRYPHON™ D432/D432E
146
D HEX AND NUMERIC TABLE
CHARACTER TO HEX CONVERSION TABLE
char decimal hex char decimal hex char decimal hex
NUL 000 00 * 042 2A U 085 55
SOH 001 01 + 043 2B V 086 56
STX 002 02 , 044 2C W 087 57
ETX 003 03 - 045 2D X 088 58
EOT 004 04 . 046 2E Y 089 59
ENQ 005 05 / 047 2F Z 090 5A
ACK 006 06 0 048 30 [ 091 5B
BEL 007 07 1 049 31 \ 092 5C
BS 008 08 2 050 32 ] 093 5D
HT 009 09 3 051 33 ^ 094 5E
LF 010 0A 4 052 34 _ 095 5F
VT 011 0B 5 053 35 ` 096 60
FF 012 0C 6 054 36 a 097 61
CR 013 0D 7 055 37 b 098 62
SO 014 0E 8 056 38 c 099 63
SI 015 0F 9 057 39 d 100 64
DLE 016 10 : 058 3A e 101 65
DC1 017 11 ; 059 3B f 102 66
DC2 018 12 < 060 3C g 103 67
DC3 019 13 = 061 3D h 104 68
DC4 020 14 > 062 3E i 105 69
NAK 021 15 ? 063 3F j 106 6A
SYN 022 16 @ 064 40 k 107 6B
ETB 023 17 A 065 41 l 108 6C
CAN 024 18 B 066 42 m 109 6D
EM 025 19 C 067 43 n 110 6E
SUB 026 1A D 068 44 o 111 6F
ESC 027 1B E 069 45 p 112 70
FS 028 1C F 070 46 q 113 71
GS 029 1D G 071 47 r 114 72
RS 030 1E H 072 48 s 115 73
US 031 1F I 073 49 t 116 74
SPACE 032 20 J 074 4A u 117 75
! 033 21 K 075 4B v 118 76
" 034 22 L 076 4C w 119 77
# 035 23 M 077 4D x 120 78
$ 036 24 N 078 4E y 121 79
% 037 25 O 079 4F z 122 7A
& 038 26 P 080 50 { 123 7B
' 039 27 Q 081 51 | 124 7C
( 040 28 R 082 52 } 125 7D
) 041 29 S 083 53 ~ 126 7E
T 084 54 DEL 127 7F
HEX AND NUMERIC TABLE
147
0 1
ANFOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFHBHIK
AKCBPJCJGIIJCMCFGPOFMJLDJK
AEFBJLBGMHPKNIFGJCGBBDNHGK
AAPHBAJJDEBJCDJAGBDLGHNFHK
AFKEBJJPCPKMAJNAMBKKKCFJKK
DLDLLLDDDLLLLLLDLLDDDLDLLL
ANEPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEHEEIK
AKCBPJCJGIIJCMCEHPLFIKNHNK
AEFBJLBGMHPKMKGPIEMNLKLEGK
AAPHBAJIDGFBMBLDDDNIEPNNFK
AEKEBJMNMOKOIOPNEFCOIJJLJK
DLDLLLDDLDDLLLLDDDLDDLDLLL
2
ANEOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEFGHIK
AKCBPJCJGIIJCMCEGMILJPPDNK
AEFBJLBGMHPKMKEKGKAMOGNEGK
AAPHBAJJDEFNLJHLIGJCCKKLDK
AELEBMKKGLEGCCHPLDIKICJLLK
DDLLLLDDDLDLLLLDLLLDDLDLLL
3 4
AMFPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKECHEIK
AKCBPJCJGIIJCMCFGKLNLGILJK
AEFBJLBGMHPLNJDDOKGPBMIGGK
AAPHBAJIDCBNPBJGGNKINPEPFK
AGLEBMONMCIOAPCIABBMOFHJJK
DLLLLLDDLLLLLLLDLLLDDLDLDL
AMFOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEAFHIK
AKCBPJCJGIIJCMCFHJIDKDKPJK
AEFBJLBGMHPLNJBGAEKOEAOGGK
AAPHBAJJDABBIJFONIOCLKDJDK
AGKEBJIKGHGGKDKKPHLIOOHJLK
DDDLLLDDDDLLLLLDDDLDDLDLDL
GRYPHON™ D432/D432E
148
5 6
AMEPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFAAEIK
AKCBPJCJGIIJCMCEGJNDOAMLNK
AEFBJLBGMHPLMLCPBCACOJIFGK
AAPHBAJIDCFJGLHNIKABJCDBBK
AHKEBJNIIGGECEIHHDDMMFLLIK
DDDLLLDDLLDLLLLDLLDDDLDLDL
AMEOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCCHIK
AKCBPJCJGIIJCMCEHKONPFOPNK
AEFBJLBGMHPLMLAKPMMDLFOFGK
AAPHBAJJDAFFBDLFDPELPHEHHK
AHLEBMLPCDIMIIAFIFJIMOLLKK
DLLLLLDDDDDLLLLDDDDDDLDLDL
7
ANFNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCHFIK
AKCBPJCJGIIJCMCEHJLAGJEHJK
AEFBJLBGMHPKMMHJBODNLMGFGK
AAPHBAJIDFBCOHNDCJGDNMAPDK
AHKEBNOMACIOMCLCEECKCIFKLK
DDLLLLDDDDLLLLLDDLLDDLDLDL
8 9
ANFMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFAFGIK
AKCBPJCJGIIJCMCEGKIOHMGDJK
AEFBJLBGMHPKMMFMPAPMOAAFGK
AAPHBAJJDHBOJPBLJMCJLJHJFK
AHLEBIILKHGGGODALCIOCDFKJK
DLDLLLDDLLLLLLLDLDLDDLDLDL
ANENGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEAAFIK
AKCBPJCJGIIJCMCFHKNODPAHNK
AEFBJLBGMHPKNOGFOGFAEJGGGK
AAPHBAJIDFFGHNDIMOMKJBHBHK
AGLEBINJEGGEOJBNDGAKAIJIKK
DLDLLLDDDDDLLLLDDLDDDLDLDL
HEX AND NUMERIC TABLE
149
A B
APCPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFABHIK
AKCBPJCJGIIJCMCEHLIFKKKFJK
AEFBJLBGMHPKNMFGFGAOPLOGGK
AAPHBAJJDAECFFJNDGOFJPBHFK
AFKEBKMFNHHIOOPEFNLCMAMLLK
DLLLLLDDLDDLLLLDDLDDDLDLLL
APCOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCDEIK
AKCBPJCJGIIJCMCEGILLLPIBJK
AEFBJLBGMHPKNMHDLIMPKHIGGK
AAPHBAJIDCEOCNFFIDKPPKGBDK
AFLEBPKCHCJAECHGKLBGMLMLJK
DDDLLLDDDLDLLLLDLDDDDLDLLL
C D
AODPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFFCHIK
AKCBPJCJGIIJCMCFGOINJGPJNK
AEFBJLBGMHPLMPAKDIKMFNNEGK
AAPHBAJJDEAOGFLIGIJFAPIFFK
AHLEBPOFNLFIGPCBBJIAKMCJLK
DLDLLLDDLLLLLLLDLDDDDLDLDL
AODOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFHAEIK
AKCBPJCJGIIJCMCFHNLDIDNNNK
AEFBJLBGMHPLMPCPNGGNABLEGK
AAPHBAJIDGACBNHANNNPGKPDDK
AHKEBKICHOLAMDKDOPCEKHCJJK
DDLLLLDDDDLLLLLDDLDDDLDLDL
E F
AOCPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEHFHIK
AKCBPJCJGIIJCMCEGNODMALJJK
AEFBJLBGMHPLNNBGMAMBKINHGK
AAPHBAJJDEEKPPFDIPDMECPLBK
AGKEBKNAJPLCEEIOGLKAIMOLKK
DDLLLLDDLLDLLLLDLDLDDLDLDL
AOCOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEFHEIK
AKCBPJCJGIIJCMCEHONNNFJNJK
AEFBJLBGMHPLNNDDCOAAPELHGK
AAPHBAJIDGEGIHJLDKHGCHINHK
AGLEBPLHDKFKOIAMJNAEIHOLIK
DLDLLLDDDDDLLLLDDLLDDLDLDL
GRYPHON™ D432/D432E
150
AUTOSCAN PATTERN CODE
ÌÄÄsÎ
Datalogic Scanning, Inc.
959 Terry Street
Eugene, OR 97402
07
dichiara che
declares that the
déclare que le
bescheinigt, daß das Gerät
declare que el
Gryphon™ D432
Gryphon™ D432E
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
89/336/EEC EMC Directive e 92/31/EEC, 93/68/EEC emendamenti successivi
and further amendments
et ses successifs amendements
und späteren Abänderungen
y succesivas enmiendas
Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and product safety.
Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und Produktsicherheit
entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y las Medidas
de seguridad relativas al producto.
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
EN 55022 (CLASS B ITE),: AUGUST 1994:
AMENDMENT A1 (CLASS B ITE), OCTOBER 2000:
LIMITS AND METHODS OF MEASUREMENTS OF RADIO
DISTURBANCE CHARACTERISTICS OF INFORMATION
TECHNOLOGY EQUIPMENTS
EN 55024, SEPTEMBER 1998: INFORMATION TECHNOLOGY EQUIPMENT
IMMUNITY CHARACTERISTICS
LIMITS AND METHODS OF MEASUREMENT
March 1st, 2007
Reference Manual
Australia
Datalogic Scanning Pty Ltd
North Ryde, Australia
Telephone: [61] (2) 9870 3200
Fax: [61] (2) 9878 8688
France and Benelux
Datalogic Scanning Sarl
LES ULIS Cedex, France
Telephone: [33].01.64.86.71.00
Fax: [33].01.64 46.72.44
Germany
Datalogic Scanning GmbH
Darmstadt, Germany
Telephone: 49 (0) 61 51/93 58-0
Fax: 49 (0) 61 51/93 58 58
Italy
Datalogic Scanning SpA
Vimercate (MI), Italy
Telephone: [39] (0) 39/62903.1
Fax: [39] (0) 39/6859496
Japan
Datalogic Scanning KK
Shinagawa, Tokyo, Japan
Telephone: 81 (0)3 3491 6761
Fax: 81 (0)3 3491 6656
Latin America
Datalogic Scanning, Inc
Miami, Florida, USA
Telephone: (305) 591-3222
Fax: (305) 591-3007
Spain and Portugal
Datalogic Scanning Sarl
Sucursal en España
Madrid, Spain
Telephone: 34 91 746 28 60
Fax: 34 91 742 35 33
United Kingdom
Datalogic Scanning LTD
Watford, England
Telephone: 44 (0) 1923 809500
Fax: 44 (0) 1923 809 505
www.scanning.datalogic.com
Datalogic Scanning, Inc.
959 Terry Street
Eugene, OR 97402
Telephone: (541) 683-5700
Fax: (541) 345-7140
©2007 Datalogic Scanning, Inc. 820001980 (Rev. A) 10/07
Gryphon™ D432/D432E
