Datel Design and Development DUS0163M0006 PS3 compatible wireless controller User Manual

Datel Design & Development, Inc. PS3 compatible wireless controller

user manual

TurboFire® Wireless Controller for PS3® - User Guide Congratulations on your purchase of Datel’s state-of-the-art TurboFire Wireless Controller for PS3. TurboFire is the only 3rd party PS3 controller to offer 100% compatible communication with the PS3 console using genuine Bluetooth protocol. It faithfully recreates all of the functionality of the PS3’s SIXAXIS controller including vibration feedback, motion sensing and full analogue input. In addition, the TurboFire Wireless Controller enhances your gaming with a programmable Rapid Fire function and new more ergonomic design. The TurboFire Wireless Controller uses two standard AA batteries for power.  If rechargeable AA batteries are used, they cannot be charged using the USB connection on the controller. Instead they should be charged using a suitable standalone charger.  Do not use damaged or leaking batteries.  Do not mix standard and rechargeable batteries.  Do not expose the controller to temperatures in excess of 40oC or below -10oC. The TurboFire Wireless Controller has been designed to be as ergonomic as possible but as with any gaming peripheral you are advised to take regular breaks during your gaming session especially if any discomfort occurs. Please read the safety instructions (opposite) regarding battery safety. 1. Press the ‘Battery compartment button’ and remove the battery compartment from the back of the controller. 2. Insert either 2x standard AA batteries or 2x rechargeable AA batteries into the battery compartment, ensuring that you orientate them as shown on the inside of the moulding. 3. Re-attach the battery compartment to the controller, ensuring that it latches correctly. Battery Compartment ButtonL2 ButtonL1 ButtonTurbo ButtonDirection ButtonsSelectPlayer Indicater NumberPS ButtonLeft Analogue StickUSB ConnectorR1 ButtonR2 ButtonButtonButtonButtonButtonRight Analogue StickStartSTART ButtonTurbo Indicator Lights The L3 and R3 buttons are activated by pressing the analogue sticks in. 4. Controller Button Layout 3. Insert Batteries 2. Safety Information 1. Introduction
Before you can use the TurboFire Wireless Controller for the first time you need to register or ‘pair’ the controller with your PS3. You only need to pair the controller with your system once. Switch the console on and then connect the controller to it using the supplied USB cable. Press the ‘PS’ button to pair the two devices. Switch the PS3 on(the power light will be solid green) After pairing or resetting the console you need to activate the controller so that it is assigned a player number. To do this, wait for the console to boot and then press the PS button once. The player number indicator lights will flash briefly and then settle on a number. The LED that stays illuminated is that controller’s player number. The TurboFire Wireless Controller is equipped with a unique programmable Turbo Rapid Fire function that can boost your firepower in any PS3 game. The Turbo Rapid Fire function has 3 speed settings and can be assigned to a wide range of buttons. By default, Turbo Rapid Fire is assigned to the R2 button but different games will use different buttons for actions like jump, shoot, block etc. In order for you to get the most out of the rapid fire function you can choose exactly which button or buttons it is assigned to. To program which buttons will use rapid fire, press and hold the TURBO button and then any one of the buttons shown in the illustration below. When you have made your selection, release the TURBO button. Turbo Rapid Fire can be enabled on the following 8 buttons: L2 ButtonL1 ButtonPress one or more of these buttonsPress andHold TurboR2 ButtonR1 ButtonButtonButtonButtonButton12 The TurboFire Wireless Controller will remember this configuration until the batteries become flat or are removed or the process is repeated to configure a different set of buttons.Step 1: Choose Rapid Fire Buttons 6. Using the Turbo Rapid Fire Function Step 2: Activate the controller Step 1: Pair the Controller 5. Using the Controller
After assigning Turbo Rapid Fire to one or more buttons (see previous section) you will see the Turbo Indicator Light on the handles of the pad flash very quickly. This indicates that Turbo Rapid Fire is running at its fastest speed. To reduce the speed, tap the TURBO button one or more times (see illustration below). To change the speed at any time, tap the TURBO button to vary the rapid fire speed or disable it again (see below). Turbo Indicator LightsTap the Turbo button to change the turbo speed:Turbo Indicator ResultTap Turbo Fastest Rapid FireTap Turbo Medium Rapid FireTap Turbo Slow Rapid FireTap Turbo Rapid Fire Off Before contacting Datel’s customer service department, please ensure that you have read through and understood the information in this manual. Please ensure that you have information on when and where you purchased this product to hand. ATTN: Customer Services, Datel Design & Development Inc 33 North Garden Avenue, Suite 900, Clearwater, FL 33755 UNITED STATES Email: support@dateldesign.com Knowledgebase: http://www.datelcustomerservice.com Web: http://us.codejunkies.com Datel Customer Services USA 7. Technical Support and Customer Service Step 2: Enable Rapid Fire and Set Speed
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:  This device may not cause harmful interference.  This device must accept any interference received, including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Responsible Party: Datel Design & Inc, 33 North Garden Avenue, Suite 900, Clearwater, FL 33755 United States of America Tel. 727-431-0650 RF warning statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction." © 2010 Datel Design & Development Ltd. TurboFire is a registered trademark of Datel Design and Development Inc. TurboFire Wireless Controller for PS3 is a 100% unofficial product and is NOT sponsored, endorsed or approved by SONY, nor any games developer or publisher. PLAYSTATION and PS3 are a registered trademarks or trademarks of SONY in the United States and/or other countries. The Bluetooth word mark, figure mark, and combination mark are all trademarks of the Bluetooth SIG. TouchSense® Technology Licensed from Immersion Corporation. Protected by one or more of the following patents. U.S. Patents: 4823634, 4896554, 5184319, 5185561, 5220260, 5235868, 5389865, 5414337, 5459382, B1 5459382, 5482056, 5513100, 5559412, 5576727, 5589854, 5592401, 5623582, 5629594, 5631861, 5676157, 5691898, 5701140, 5721566, 5724264, 5731804, 5734373, 5739811, 5767839, 5769640, 5790108, 5805140, 5821920, 5825308, 5828197, 5831408, 5844392, 5872438, 5880714, 5889670, 5889672, 5907487, 5929607, 5930741, 5929846, 5956484, 5959613, 5999168, 6015473 ,6020875, 6020876, 6020967, 6024576, 6028593, 6037927, 6042555, 6046727, 6050718, 6050962, 6057828, 6059506, 6061004, 6067077, 6078308, 6078876, D427635, 6088017, 6088019, 6100874, 6101530, 6104158, 6104379, 6104382, 6106301, 6110130, 6125337, 6125385, 6128006, 6131097, 6134506, 6147674, 6148280, 6154198, 6154201, 6161126, 6162190, 6166723, 6169540, 6184868, 6191774, 6195592, 6201533, 6211861, 6215470, 6219032, 6219033, 6232891, 6243078, 6246390, 6252579, 6252583, 6256011, 6259382, 6271828, 6271833, 6275213, B1 6278439, 6281651, 6285351, 6288705, 6292170, 5754023, *RE37374, 6292174, 6300936, 6300937, 6300938, 6304091, 6310605, 6317116, 6323837, 6342880, 6343349, 6348911, 6353850, 6353427, 6366272, 6366273, 6374255, 6380925, 6396232, 6400352, 6411276, 6413229, 6424333, 6424356, 6429846, 6428490, 6433771, 6437771, 6448977, 6469692, 6470302, 6486872, 6497672, 6563487, 6564168, 6580417, 6636161, 6636197, 6639581, 6654000, 6661403, 6680729, 6683437, 6686901, 6686911, 6693622, 6693626, 6697043, 6697044, 6697048, 6697748, 6697086, 6703550, 6704001, 6704002, 6704683, 6705871, 6707443, 6715045, 6750877, 6762745, 6781569 FCC Rules, Part 15.

Navigation menu