Datel Design and Development DUS0163M0006 PS3 compatible wireless controller User Manual

Datel Design & Development, Inc. PS3 compatible wireless controller

user manual

TurboFire® Wireless Controller
for PS3® - User Guide
Congratulations on your purchase of Datel’s state-of-the-art TurboFire Wireless
Controller for PS3. TurboFire is the only 3rd party PS3 controller to offer 100%
compatible communication with the PS3 console using genuine Bluetooth
protocol.
It faithfully recreates all of the functionality of the PS3’s SIXAXIS controller
including vibration feedback, motion sensing and full analogue input. In addition,
the TurboFire Wireless Controller enhances your gaming with a programmable
Rapid Fire function and new more ergonomic design.
The TurboFire Wireless Controller uses two standard AA batteries for power.
If rechargeable AA batteries are used, they cannot be charged using the
USB connection on the controller. Instead they should be charged using
a suitable standalone charger.
Do not use damaged or leaking batteries.
Do not mix standard and rechargeable batteries.
Do not expose the controller to temperatures in excess of 40oC or below
-10oC.
The TurboFire Wireless Controller has been designed to be as ergonomic as
possible but as with any gaming peripheral you are advised to take regular
breaks during your gaming session especially if any discomfort occurs.
Please read the safety instructions (opposite) regarding battery safety.
1. Press the ‘Battery compartment button’ and remove the battery
compartment from the back of the controller.
2. Insert either 2x standard AA batteries or 2x rechargeable AA batteries into
the battery compartment, ensuring that you orientate them as shown on
the inside of the moulding.
3. Re-attach the battery compartment to the controller, ensuring that it
latches correctly.
Battery Compartment Button
L2 Button
L1 Button
Turbo Button
Direction Buttons
Select
Player Indicater Number
PS Button
Left Analogue Stick
USB Connector
R1 Button
R2 Button
Button
Button
Button
Button
Right Analogue Stick
Start
START Button
Turbo Indicator Lights
The L3 and R3 buttons are activated by pressing the analogue sticks in.
4. Controller Button Layout
3. Insert Batteries
2. Safety Information
1. Introduction
Before you can use the TurboFire Wireless Controller for the first time you need to
register or ‘pair’ the controller with your PS3.
You only need to pair the controller with your system once.
Switch the console on and then connect the controller to it using the supplied
USB cable. Press the ‘PS’ button to pair the two devices.
Switch the PS3 on
(the power light will be solid green)
After pairing or resetting the console you need to activate the controller so that it
is assigned a player number. To do this, wait for the console to boot and then
press the PS button once.
The player number indicator lights will flash briefly and then settle on a number.
The LED that stays illuminated is that controller’s player number.
The TurboFire Wireless Controller is equipped with a unique programmable
Turbo Rapid Fire function that can boost your firepower in any PS3 game. The
Turbo Rapid Fire function has 3 speed settings and can be assigned to a wide
range of buttons.
By default, Turbo Rapid Fire is assigned to the R2 button but different games will
use different buttons for actions like jump, shoot, block etc. In order for you to
get the most out of the rapid fire function you can choose exactly which button or
buttons it is assigned to.
To program which buttons will use rapid fire, press and hold the TURBO button
and then any one of the buttons shown in the illustration below. When you have
made your selection, release the TURBO button. Turbo Rapid Fire can be
enabled on the following 8 buttons:
L2 Button
L1 Button
Press one or more of these buttons
Press and
Hold Turbo
R2 Button
R1 Button
Button
Button
Button
Button
1
2
The TurboFire Wireless Controller will remember this configuration until the
batteries become flat or are removed or the process is repeated to configure a
different set of buttons.
Step 1: Choose Rapid Fire Buttons
6. Using the Turbo Rapid Fire Function
Step 2: Activate the controller
Step 1: Pair the Controller
5. Using the Controller
After assigning Turbo Rapid Fire to one or more buttons (see previous section)
you will see the Turbo Indicator Light on the handles of the pad flash very quickly.
This indicates that Turbo Rapid Fire is running at its fastest speed. To reduce the
speed, tap the TURBO button one or more times (see illustration below).
To change the speed at any time, tap the TURBO button to vary the rapid fire
speed or disable it again (see below).
Turbo Indicator Lights
Tap the Turbo button to change the turbo speed:
Turbo Indicator Result
Tap Turbo Fastest Rapid Fire
Tap Turbo Medium Rapid Fire
Tap Turbo Slow Rapid Fire
Tap Turbo Rapid Fire Off
Before contacting Datel’s customer service department, please ensure that you
have read through and understood the information in this manual.
Please ensure that you have information on when and where you purchased this
product to hand.
ATTN: Customer Services, Datel Design & Development Inc
33 North Garden Avenue, Suite 900, Clearwater, FL 33755
UNITED STATES
Email: support@dateldesign.com
Knowledgebase: http://www.datelcustomerservice.com
Web: http://us.codejunkies.com
7. Technical Support and Customer Service
Step 2: Enable Rapid Fire and Set Speed
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Responsible Party:
Datel Design & Inc,
33 North Garden Avenue,
Suite 900,
Clearwater,
FL 33755
United States of America
Tel. 727-431-0650
RF warning statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction."
© 2010 Datel Design & Development Ltd. TurboFire is a registered trademark of
Datel Design and Development Inc.
TurboFire Wireless Controller for PS3 is a 100% unofficial product and is NOT sponsored,
endorsed or approved by SONY, nor any games developer or publisher. PLAYSTATION and
PS3 are a registered trademarks or trademarks of SONY in the United States and/or other
countries.
The Bluetooth word mark, figure mark, and combination mark are all trademarks of the
Bluetooth SIG.
TouchSense® Technology Licensed from Immersion Corporation. Protected by one or more of
the following patents.
U.S. Patents: 4823634, 4896554, 5184319, 5185561, 5220260, 5235868, 5389865, 5414337, 5459382, B1 5459382, 5482056, 5513100,
5559412, 5576727, 5589854, 5592401, 5623582, 5629594, 5631861, 5676157, 5691898, 5701140, 5721566, 5724264, 5731804, 5734373,
5739811, 5767839, 5769640, 5790108, 5805140, 5821920, 5825308, 5828197, 5831408, 5844392, 5872438, 5880714, 5889670, 5889672,
5907487, 5929607, 5930741, 5929846, 5956484, 5959613, 5999168, 6015473 ,6020875, 6020876, 6020967, 6024576, 6028593, 6037927,
6042555, 6046727, 6050718, 6050962, 6057828, 6059506, 6061004, 6067077, 6078308, 6078876, D427635, 6088017, 6088019, 6100874,
6101530, 6104158, 6104379, 6104382, 6106301, 6110130, 6125337, 6125385, 6128006, 6131097, 6134506, 6147674, 6148280, 6154198,
6154201, 6161126, 6162190, 6166723, 6169540, 6184868, 6191774, 6195592, 6201533, 6211861, 6215470, 6219032, 6219033, 6232891,
6243078, 6246390, 6252579, 6252583, 6256011, 6259382, 6271828, 6271833, 6275213, B1 6278439, 6281651, 6285351, 6288705, 6292170,
5754023, *RE37374, 6292174, 6300936, 6300937, 6300938, 6304091, 6310605, 6317116, 6323837, 6342880, 6343349, 6348911, 6353850,
6353427, 6366272, 6366273, 6374255, 6380925, 6396232, 6400352, 6411276, 6413229, 6424333, 6424356, 6429846, 6428490, 6433771,
6437771, 6448977, 6469692, 6470302, 6486872, 6497672, 6563487, 6564168, 6580417, 6636161, 6636197, 6639581, 6654000, 6661403,
6680729, 6683437, 6686901, 6686911, 6693622, 6693626, 6697043, 6697044, 6697048, 6697748, 6697086, 6703550, 6704001, 6704002,
6704683, 6705871, 6707443, 6715045, 6750877, 6762745, 6781569
FCC Rules, Part 15.

Navigation menu