| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1561084 |
| Application ID | 15ejFeH5nMeiwWqf4P649g== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 87.14kB (1089261 bits) |
| Date Submitted | 2011-10-17 00:00:00 |
| Date Available | 2011-10-17 00:00:00 |
| Creation Date | 2011-10-07 14:00:14 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2011-10-11 15:44:11 |
| Document Title | user manual |
| Document Creator | Microsoft® Office Word 2007 |
| Document Author: | daniel.leese |
Index
TurboFire® EVO™
For Xbox 360
1. Thank you for Choosing TurboFire EVO
2. Carton Contents
3. Important Information
4. Controller Overview
5. Combat Command LCD Display Overview
6. Inserting Batteries
7. Attaching a Rechargeable Battery Pack
7.1. Recharging a Rechargeable Battery Pack
8. Syncing the Controller
9. Adjusting the Level of Brightness
10. Entering and Exiting the TurboFire EVO Menu
11. Activating Features
12. Pre-installed Features
12.1. Sniper
12.1.1. Configuring Sniper
12.2. Remap
12.2.1. Configuring Remap
12.3. Rapid Fire
12.3.1. Choosing Which Buttons are Assigned Rapid Fire
12.3.2. Setting Rapid Fire Speed
12.4. Low Recoil
12.4.1. Configuring Low Recoil
13. EVO Customizer PC software
14. Compatibility Warranty
15. FCC Rules, Part 15
16. Customers in Canada
17. Technical Support and Customer Service
User Guide
V1.0
1. Thank you for Choosing TurboFire EVO™
3. Important Information
TurboFire® EVO™ further builds on the already impressive spec of the best-selling third party
wireless controllers TurboFire® and TurboFire® 2. The TurboFire® EVO™ includes a 1.7”
Combat Command LCD Display, enabling you to select from and configure a range of in built
enhancement features.
Please ensure that you carefully read the following important information before continuing:
Advanced features are available with just a few button presses, these features include Combo
Sequences, Sniper Mode, Rapid Fire, Low Recoil, Button Remapping, Y-Axis Reverse, Analogue
Sensitivity, Left Handed Mode and Auto Fire.
The TurboFire® EVO™ is capable of storing four features at one time. Connecting the
TurboFire® EVO™ to a USB port on any internet enabled PC allows you update and change the
pre-installed features. Once you have made your selections, you can choose to either configure
the features via your computer or using the Combat Command LCD Display.
In addition to its unique programmability, TurboFire® EVO™ features an integrated headset
port for Xbox® Live™ play. Its precision engineered design is built to withstand aggressive fast paced game play! The design team have even thought to reposition the feature buttons to the
back of the controller, a more comfortable position minimising finger fatigue in extended
gameplay. Datel has also listened to requests from users of the original TurboFire® controllers
and TurboFire® EVO™ provides the option to use a rechargeable battery pack.
2. Carton Contents
Please verify that your carton contains the following:
1 x TurboFire EVO
1 x USB Cable
Safety Information
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such
as sunshine, fire or the like.
• Never try to dismantle the product yourself, or push objects of any kind into the products,
as this may cause short circuits which could result in a fire or electric shock.
• None of the components can be replaced or repaired by users.
• Avoid exposing your product to rain, moisture or other liquids to protect against damage
to the product or injury to you.
• Keep all products, cords, and cables away from operating machinery.
• Dispose of the product according to local standards and regulations.
• Do not expose the product to temperatures in excess of 40oC or below -10oC.
Taking Regular Breaks
The TurboFire EVO controller has been designed to be as ergonomic as possible but as with
any gaming peripheral you are advised to take regular breaks during your gaming session
especially if any discomfort occurs.
Important Battery Precautions
Please ensure that you follow these recommendations to avoid causing damage to batteries
or the product:
• Do not mix standard and rechargeable batteries.
• Never mix new and used batteries with different charge levels.
• Ensure that batteries are fitted in accordance to the guide shown on the inside of the
battery moulding.
• Do not leave flat batteries in the product.
• Avoid mixing batteries of different types or brands.
• Ensure that batteries are removed from the product for long periods of non-use.
• Do not use batteries which appear to be damaged.
• When disposing of batteries follow appropriate local guidelines and regulations.
4. Controller Overview
5. Combat Command LCD Display Overview
RB Button
Combat Command
LCD Display
LB Button
Left Analogue
Stick
Y Button
B Button
X Button
A Button
Start Button
Home Button
Back Button
Right Analogue
Stick
Direction
Buttons
Feature
Indicator
Lights
F2 Button
Feature Slot 2
Feature Slot 3
Player Number
Indicator
Notification
Indicator
Battery Status
Indicator
Feature Slot 4
Headset Connection
6. Inserting Batteries
USB Connection
RT Button
Battery Compartment
Button
Feature Slot 1
LT Button
F1 Button
Sync
Button
Before inserting batteries, please refer to the ‘Important Battery Precautions’ information
beneath section ‘3’.The TurboFire EVO can be powered using regular cell AA batteries or using
a rechargeable battery pack as described in the next section. In order to insert regular cell AA
batteries in to the battery compartment, please follow these steps:
Step 1:
Whilst pressing and holding the Battery Compartment Button remove the battery
compartment from the rear of the controller.
Step 2:
Insert 2 x regular cell AA batteries, ensuring that you orientate them as shown on the inside of
battery moulding.
Step 3:
Re-attach the battery compartment to the controller ensuring that it latches correctly.
Important Information
The TurboFire EVO does not support the usage of rechargeable AA batteries. For advice on the
usage of a rechargeable battery pack, please refer to the next section.
7. Attaching a Rechargeable Battery Pack
The TurboFire EVO supports the usage of a rechargeable battery pack (not supplied). A
rechargeable battery pack is used in place of the battery compartment and is usually a sealed
unit. Rechargeable battery packs are manufactured by a number of first and third party
manufacturers. In order to attach a rechargeable battery pack, please follow these steps:
Step 1:
Whilst pressing and holding the Battery Compartment Button remove the battery
compartment from the rear of the controller.
Other Charging Information
The TurboFire EVO does not support the usage or charging of rechargeable AA batteries. Please
refer to the information provided with your rechargeable battery pack for approximate
charging times.
8. Syncing the Controller
Before you can use the TurboFire EVO for the first time you need to sync it with your Xbox 360.
To do this, please follow these steps:
Step 2:
Attach the rechargeable battery pack ensuring that it latches correctly.
7.1. Recharging a Rechargeable Battery Pack
The TurboFire EVO allows the recharging of a rechargeable battery pack using the USB
connection on the TurboFire EVO and the USB cable (supplied). In order to recharge a
rechargeable battery pack, please follow these steps:
Step 1:
Ensuring the Xbox 360 is powered on. Press and hold the Home button or Start button to
power the controller so you are shown four connected circles on the Combat Command LCD
Display indicating that the controller is not synced with a console.
Step 1:
Connect the larger end of the USB Cable (supplied) into any free USB port on your Xbox 360.
Step 2:
Connect the mini USB end of the USB Cable to the USB Connection located on the top of the
TurboFire EVO.
Step 2:
Press the Sync button on your Xbox 360. The actual position of the sync button may differ from
the illustration.
Step 3:
Press and hold the Sync button on the TurboFire EVO for a number of seconds. After a few
seconds the TurboFire EVO and the Xbox 360 will automatically be synchronized. A player
number will be assigned to the TurboFire EVO and displayed by Player Number Indicator on the
Combat Command LCD Display.
9. Adjusting the Level of Brightness
11. Activating Features
The Combat Command LCD Display can be set to the preferred level of brightness. In order to
adjust the level of brightness, please follow these steps:
It is possible to set each of the features to activate in one of five ways. You can choose to
activate and deactivate a feature by pressing the F1 or F2 button. You can choose to activate a
feature when you are pressing and holding the F1 or F2 button. Alternatively you can choose to
have a feature set to always on, meaning that you do not need to press any button to activate
the feature. When activating features you can use multiple instances of some features such as
Rapid Fire and Sniper.
When you have entered the TurboFire EVO menu as detailed in the previous section, using the
Left Analog Stick or the Direction buttons enables you can scroll between the four features.
With the feature which you wish to activate highlighted, using the X button on the TurboFire
EVO you can toggle the highlighted feature between the five different activation modes. Each
of the activation modes is indicated by an icon being added to the highlighted feature as
follows:
Step 1:
Press and hold the F1 and F2 Buttons
Step 2:
Whilst continuing to press and hold the F1 and F2 buttons increase and decrease the level of
brightness by moving the direction buttons up and down as shown.
Tap X
Activate and deactivate by pressing the F1 butt on
Tap X
Activate and deactivate by pressing the F2 butt on
Tap X
Always on
Tap X
Activate when you are pressing and holding the F1 butt on
Tap X
Activate when you are pressing and holding the F2 butt on
10. Entering and Exiting the TurboFire EVO Menu
OR
12. Pre-installed Features
Step 1:
Each time you wish to access the TurboFire EVO Menu you need to short tap the Home button
on the TurboFire EVO controller. Access the usual Xbox guides when pressing and holding the
Home button for over a second.
Step 2:
Whilst you are within the TurboFire EVO menu the TurboFire EVO buttons and controls will
only allow you to control the TurboFire EVO menu. In order to exit the TurboFire EVO Menu
and regain control of your console, you need to tap the Home button, Back button or B button.
The TurboFire EVO is preinstalled with the features Sniper, Remap, Rapid Fire and Low recoil.
Each of the pre-installed features is easily identifiable by the following feature images:
Sniper Mode
Remap
A
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.5
Linearized : No
Language : en-GB
Tagged PDF : Yes
XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format : application/pdf
Creator : daniel.leese
Create Date : 2011:10:07 14:00:14Z
Creator Tool : Microsoft® Office Word 2007
Modify Date : 2011:10:11 15:44:11+07:00
Metadata Date : 2011:10:11 15:44:11+07:00
Producer : Microsoft® Office Word 2007
Document ID : uuid:02bf61ac-3deb-44c8-935f-69a315e75432
Instance ID : uuid:b3f4ffac-02aa-45f1-98c7-664642e7e322
Page Count : 10
Author : daniel.leese
EXIF Metadata provided by EXIF.tools