Datel Design and Development XB1188 Game Talk Pro-2™ Wireless Audio Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1549586
Application ID	bYfhx1BK/4kN4eA9BuWuEg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	90.45kB (1130676 bits)
Date Submitted	2011-09-27 00:00:00
Date Available	2011-09-27 00:00:00
Creation Date	2011-09-26 16:09:38
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2011-09-26 16:27:27
Document Title	Microsoft Word - PS3_Game_Talk_Pro-2_Wireless User manual.rtf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Vincent

Thank you for choosing Game Talk Pro‐2™ Wireless
Game Talk Pro‐2™ Wireless are TRULY WIRELESS GAMING HEADPHONES for PS3® gamers who
want immersive game sound and crystal clear communication ‐ totally wireless for both chat and
game sound!
Featuring a powerful noise cancelling codec that greatly reduces distracting ambient noises
these headphones will ensure that your instructions are received loud and clear.
Large, deep‐cushioned ear cups and rugged, lightweight design, ensure you’ll enjoy your game
audio and talkback in comfort during extended game‐play. Add to that an adjustable boom, and
touch button volume controls and you’ll see why we’re calling these the ultimate gaming
headphones for PS3®.
Before First Time Usage:
Please ensure that you carefully read each of the sections in this user guide. Failure to do so
may result in damage or the incorrect usage of the Game Talk Pro‐2 Wireless.
If you experience problems in operating the Game Talk Pro‐2 Wireless, please refer to the
‘Troubleshooting’ section.
Check Carton Contents
Please verify that your package contains the following:
Game Talk Pro‐2™ Wireless
For PS3
User Guide
A. Game Talk Pro‐2 Wireless
B. Audio Transmitter
V1.0
C. USB Charging Cable
Important Information
Safety Information:
•Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as
sunshine, fire or the like.
• Excessive sound pressure from earphones and
headphones can cause hearing loss.
• Use of a headset will impair your ability to hear
other sounds. Use caution while using your headset
when you are engaging in any activity that requires
your full attention.
• Never try to dismantle the product yourself, or
push objects of any kind into the products, as this
may cause short circuits which could result in a fire
or electric shock.
• None of the components can be replaced or
repaired by users.
• Avoid exposing your product to rain, moisture or
other liquids to protect against damage to the
product or injury to you.
• Keep all products, cords, and cables away from
operating machinery.
• Dispose of the product according to local
standards and regulations.
Built‐In Battery Care:
• The headset is powered by a rechargeable battery. •
The full performance of a new battery is achieved only
after two or three complete charge and
discharge cycles.
• The battery can be charged and discharged
hundreds of times, but will eventually wear out. • If
left unused, a fully charged battery will lose its
charge over time.
• Leaving the product in hot or cold places will
reduce the capacity and lifetime of the battery.
• Always try to keep the battery between 15°C and
25°C (59°F and 77°F). A product with a hot or cold
battery may not work temporarily, even when the
battery is fully charged. Battery performance is
particularly limited in temperatures well below
freezing.
Battery Precautions:
• ”Caution” ‐ The battery used in this headset may
present a risk of fire or chemical burn if mistreated. •
Do not attempt to open the product or replace the
battery. It is built‐in and not changeable. Use of
other batteries may present a risk of fire or
explosion and the warranty will be terminated.
• Only recharge your battery with the provided
cable designated for this product.
• Dispose of batteries according to local regulations.
Please recycle when possible. Do not dispose as
household waste or in a fire as they may explode. •
Batteries may explode if damaged.
Product Overview
Hearing Loss:
Permanent hearing loss may result from long‐term
exposure to sound at high volumes. Use as low a
volume as possible.
Headsets are capable of delivering sounds at loud
volumes and high pitched tones. Under certain
circumstances, exposure to such sounds can result
in permanent hearing loss damage. Avoid prolonged
use of the headset at excessive sound pressure
levels. Please read the Safety Guidelines below prior
to using this headset.
Game Talk Pro‐2 Wireless
A. Sync Button
B. Power/Mute
Button
C. FX Button
You Can Reduce the Risk of Hearing Damage by
Following These Safety Guidelines:
D. Status Indicator
Lights
1. Prior to using this product follow these steps •
Before putting on the headset, turn the Game Chat
and Game Volume controls to the lowest level; • Put
the headset on; and then
• Slowly adjust the volume controls to a
comfortable level.
E. Game Chat
Volume Control
2. During the use of this product
• Keep the volume at the lowest level possible and
avoid using the headset in noisy environments
where you may be inclined to turn up the volume; •
If increased volume is necessary, adjust the
volume controls slowly;
• Ringing in the ears may indicate that the sound
levels are too high;
• If you experience discomfort or ringing in your
ears, immediately discontinue using the headset
and consult a physician; and
• Stop using the headset if it causes great
discomfort.
G. Charging Jack
F. Game Volume
Control
H. Adjustable
Microphone Boom
Audio Transmitter
With continued use at high volume, your ears may
become accustomed to the sound level, which may
result in permanent damage to your hearing
without any noticeable discomfort.
A. Connect to PS3 A/V MULTI OUT Connector
B. Sync Light
C. Connect PS3 A/V Cable (Not required if you are using HDMI cable)
Charging the Headset
The Game Talk Pro-2 Wireless comes with a built-in Lithium Polymer battery that needs to be
charged before first use. To do this, please follow these steps:
Important Charging Precautions
For Safety reasons, and to prevent damage to the headset, please ensure that you follow these
recommendations:


Please recharge the headset at normal room temperature, do not recharge the headset in
temperatures in excess of 30oC.
Only use the USB charging cable supplied to charge the headset.
Connecting the Audio Transmitter to the PS3
The following steps explain how to connect the Audio Transmitter to the PS3 using the
standard A/V cable or a HDMI cable.
Step 1:
Connect the USB charging cable (supplied) into any free USB port on your PS3.
Step 2:
Connect the mini USB end of the charging cable to the Charging Jack, located on the Game Talk
Pro-2 Wireless.
Step 3:
Whilst charging, the Status Indictor Lights will repeatedly fill up in sequence.
Step 4:
When charging is complete all four Status Indicator Lights will remain static. Disconnect the
USB charging cable from your PS3 and the Charging Jack on the Game Talk Pro-2 Wireless.
Charging Time
Fully charging the built-in battery can take up to four hours. While charging, the headset will
not function and it’s perfectly normal for the headset to become slightly warm.
When to Recharge
When the battery begins to run low the headset will emit 2 audible beeps, these beeps will
repeat until the unit is plugged into the PS3 console to recharge – or when battery life totally
expires and power is lost. In order hear the 2 audible beeps you will need to ensure that the
Game Chat Volume control is set to a reasonable level.
Step 1:
Ensure that the console is powered off and disconnect the inserted PS3 A/V cable.
Step 2:
Connect the Audio Transmitter to the A/V MULTI OUT connection on the PS3.
Step 3:
Connect the A/V cable to the rear of the Audio Transmitter or connect the HDMI cable to the
HDMI connection on the PS3.
Configuring the PS3 Audio Output Setting
Registering the Game Talk Pro‐2 Wireless with the PS3
Before you can use the Game Talk Pro‐2 Wireless for the first time to hear game sound, you
need to ensure that the PS3 Audio Output Setting is correctly configured. This setting may
already be correctly configured, but we would recommend confirming how the setting is
configured before continuing. If this setting is not correctly configured you will not hear any
game sound. Some PS3 consoles which are using an early release of the PS3 System Software
(firmware) may not include the Audio Output Setting and are not affected.
Before you can use the Game Talk Pro‐2 Wireless for the first time to communicate with other
players, you need to register the Game Talk Pro‐2 Wireless with the PS3. When successfully
registered you also need to set the Game Talk Pro‐2 Wireless as the input and output audio
device.
Registering the Game Talk Pro‐2 Wireless
In order to register the Game Talk Pro‐2 Wireless with the PS3, please follow these steps:
In order to configure the PS3 Audio Output Setting, please follow these steps:
Step 1:
Turn on your PS3 and go to the PS3 Home Menu.
Step 2:
Scroll to ‘Settings’ and select ‘Sound Settings’.
Step 3:
Select ‘Audio Output Settings’.
Step 4:
When entering the Audio Output Settings screen the option ‘Audio Input Connector / SCART /
AV MULTI’ needs to be already highlighted indicating that the setting is correctly configured. If
this is the case, please proceed to the next section. If this is not the case please refer to ‘Step 5’
of this section.
Step 5:
Scroll down to and select the option ‘Audio Input Connector / SCART / AV MULTI’.
Step 6:
You will now need to save the settings to complete the change in configuration.
Step 1:
Turn on your PS3 and go to the PS3 Home Menu.
Step 2:
Scroll to ‘Settings’ and select ‘Accessory Settings’.
Step 3:
Select ‘Manage Bluetooth® Devices’.
Step 4:
Select ‘Yes’ to confirm that you want to register a device.
Step 5:
Turn on the Game Talk Pro‐2 Wireless by pressing and holding the Power/Mute Button for a
number of seconds, until the Status Indicator Lights begin to flash.
Step 6:
Press and hold the Sync Button on the Game Talk Pro‐2 Wireless, so that the Status Indicator
Lights flash in sequence.
Step 7:
Select ‘Start Scanning’.
Connect the Audio Transmitter with the Game Talk Pro‐2 Wireless
The Game Talk Pro‐2 Wireless will automatically detect the closest “Audio Transmitter” when
powered on. It will need to be synchronized with your PS3 as detailed in the next section to
communicate with other players during multi player sessions.
In order for the Game Talk Pro‐2 Wireless to automatically connect to the Audio Transmitter.
Firstly connect the Audio Transmitter to the PS3 as detailed in the previous section. Ensure the
PS3 is turned on and confirm the Sync Light on the Audio Transmitter is flashing. Turn on the
Game Talk Pro‐2 Wireless by pressing and holding the Power/Mute Button for a number of
seconds, until the Status Indicator Lights begin to flash. The Audio Transmitter will now
automatically sync with the Game Talk Pro‐2 Wireless. This is confirmed by the Sync Light on the
Audio Transmitter remaining static.
Step 8:
When found by the PS3 select ‘Game Talk Pro‐2’.
Step 9:
You will now need to enter a pass key, select the empty box to view the pass key entry screen.
Step 10:
Using the onscreen keypad enter the pass key ‘0000’ and select ‘Enter’ to confirm the entered
pass key.
Step 11:
To complete the registration select ‘OK’. After a few seconds the Game Talk Pro‐2 Wireless and
console will be synchronised. The first Status Indicator Light will remain static at this stage
indicating the headset is synchronised with the console.
Setting as the Input and Output Audio Device
After successfully registering the Game Talk Pro‐2 Wireless with your PS3 you will now need to
set the headset as the input and output audio device. To do this, please follow these steps:
Wearing the Headset
The microphone boom can be worn on either side of your head. Rotate the headset arm over
the top of the headset to change side as shown. Position the mouthpiece so that it is close to
your mouth without being directly in front of it. This will allow the mic to pick up your voice
clearly without picking up your breathing.
Step 1:
Return to the Accessory Settings screen and select ‘Audio Device Settings’.
Step 2:
Select ‘Input Device’, scroll up or down to and select ‘Game Talk Pro‐2’.
Step 3:
The Game Talk Pro‐2 Wireless should now be set as the Input and Output Audio Device.
Ensuring that the Game Chat Volume Control is set to a reasonable level, perform a
microphone test by talking in to the microphone. The onscreen sound meter will indicate the
microphone level. If required increase or decrease the microphone level to a preferred level
using the ‘Microphone Level’ setting.
Step 4:
Select ‘OK’ to save the settings and complete the registering process.
You are now ready to communicate with other players, please refer to the next section for
advice on wearing the headset.
Adjustments can be made on either side of the headset as shown by sliding it outwards to
achieve a comfortable fit.
Setting the Game Talk Pro‐2 Wireless On or Off
Troubleshooting
In order to set the Game Talk Pro‐2 Wireless to on. Press and hold the Power/Mute Button for a
number of seconds, until the Status Indicator Lights begin to flash. The headset will emit an
ascending beep when the headset is powered on.
Why am I unable to communicate with other players during multi player sessions?
If when adjusting the Game Chat Volume Control you are unable to communicate with other
players. You need to ensure that the Game Talk Pro‐2 Wireless is registered and set as the
Input and Output audio device. Please refer to the section ‘Registering the Game Talk Pro‐2
Wireless with the PS3’.
If the Game Talk Pro‐2 Wireless is synchronized with your console, the first Status Indicator
Light will remain static after a brief period indicating the headset is synchronised with the
console. If the Status Indicator Lights continue to flash after a brief period, please refer to the
section ‘Syncing the Game Talk Pro‐2 Wireless with the PS3’.
In order to set the Game Talk Pro‐2 Wireless to off. Press and hold the Power/Mute Button for a
number of seconds, until the Status Indicator Lights are no longer lit. The headset will emit a
descending beep when the headset is powered off.
Mute the Microphone
In order to mute the microphone, press the Power/Mute Button. Press the Power/Mute Button
again to disable microphone mute. The headset will emit a descending beep when microphone
mute is enabled and an ascending beep when microphone mute is disabled.
Reverse the Left and Right Speaker
You can reverse the left and right speaker to allow you to change which sounds you hear from
which speaker. In order to reverse the speakers press and hold the FX Button for several
seconds, to reverse the speakers at any time.
FX Features
The Game Talk Pro‐2 Wireless includes four FX features enabling you to enhance the sound
quality. The FX Features are Bass Boost, Extreme Bass Boost, 3D Effect and Treble Boost. Bass
Boost allows you to increase the level of bass and Extreme Bass Boost allows you to further
increase the level of bass. 3D Effect is achieved by widening the stereo image by modifying the
phase information. Treble Boost allows you to increase the level of audio treble.
You cycle though each of the FX features using the headsets FX Button. The Game Talk Pro‐2
Wireless emits a number of beeps each time the FX Button is pressed, indicating the set FX
feature, as detailed below:
One Beep =
Two Beeps =
Three Beeps =
Four Beeps =
Five Beeps =
No FX Feature
Bass Boost
Extreme Bass Boost
3D Effect
Treble Boost
Why are other players unable to hear me during multi player sessions?
If you are able to hear other players during multi player sessions but they are unable to hear
you. It may be the case that you have the microphone mute enabled. Please refer to the
section ‘Mute the Microphone’.
Why am I unable to hear game audio though the Game Talk Pro‐2 Wireless?
When adjusting the Game Volume Control if you are unable to hear game audio. You need to
ensure that the PS3 Audio Output Setting is correctly configured, please refer to the section
‘Configuring the PS3 Audio Output Setting’.
If you continue to experience the same problem, you need to ensure that the Audio
Transmitter is correctly connected to the PS3. Please refer to the section ‘Connecting the Audio
Transmitter to the PS3’. The Sync Light on the Audio Transmitter will flash when searching for
the Game Talk Pro‐2 Wireless, and remain static when connected with the Game Talk Pro‐2
Wireless. Please also refer to the section ‘Connect the Audio Transmitter with the Game Talk
Pro‐2 Wireless’.
Why does the Audio Transmitter Sync Light Fail to Illuminate?
Have you correctly connected the Audio Transmitter to the PS3? Please refer to the section
‘Connecting the Audio Transmitter to the PS3’.
If you continue to experience the same problem, try disconnecting and reconnecting the Audio
Transmitter to ensure that it’s seated correctly and always ensure that the PS3 is powered on.
Why Does the Game Talk Pro‐2 Wireless Fail to Power On?
If when you press and hold the Power/Mute Button for a number of seconds, the Status
Indicator lights fail to illuminate. Try recharging the headset as detailed under the section
‘Charging the Headset’. Also we would recommend trying to charge the Game Talk Pro‐2
Wireless whilst connected to a different USB connection.
Why does my headset no longer sound the same?
Enabling one of the FX features will enhance the quality of the sound. Please refer to the
section ‘FX Features’. If you would like to disable any enabled FX feature, press the FX Button
several times until the headset emits one beep. One beep indicates that no FX features are
enabled.
FCC Rules, Part 15
Customers in Canada
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
IC warning statement:
This Class B digital apparatus complies with Canadian ICES‐003.
This device complies with RSS 210 of Industry Canada (IC).
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
Operation of this device is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure conditions without restriction.
European Community Declaration of Conformity
Declared under our sole responsibility that the following product is intended to be used in all
EU and EFTA countries:
Game Talk Pro‐2™ Wireless
Model no: AS000188
Brand Name: Datel
This device must accept any interference received, including interference that may
cause undesired operation
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Responsible Party:
Datel Design & Development Inc,
33 North Garden Avenue,
Suite 900,
Clearwater,
FL 33755
United States of America
Tel. 727‐431‐0650
We hereby declare that this PS3™ accessory is in compliance with the essential requirements
and other relevant provision of the EMC Directive 2004/108/EC and Low Voltage Directive
2006/95/EC and R&TTE Directive 1999/5/EC
The following standards were applied:
EMC
EN 301 489‐1 V1.8.1
EN 61000‐3‐2: 2006+A1:2009+ A2:2009
EN 61000‐3‐3:2008
EN 301 489‐17 V2.11
LVD
EN 60950‐1: 2006 + A11: 2009 + A1: 2010
R&TTE
ETSI EN 300 328 V 1.7.1
EN50371: 2002
Technical Support and Customer Services
Before contacting Datel’s customer service
department, please ensure that you have
read
through and understood the information in
this user guide. Please ensure that you have
information on when and where you
purchased this product to hand.
Datel Customer Services Europe
Customers Services, Datel Ltd
Stafford Road, Stone,
STAFFS, ST15 0DG
UNITED KINGDOM
Email: support@datel.co.uk
Web: http://uk.codejunkies.com
Datel Customer Services USA
ATTN: Customer Services,
Datel Design & Development
Inc
33 North Garden Avenue,
Suite 900, Clearwater, FL
33755
UNITED STATES
Email: support@dateldesign.com
Knowledgebase:
http://www.datelcustomers
ervice.com
Web:
http://us.codejunkies.com
© 2011 Datel Ltd. Game Talk Pro‐2 Wireless is a trademark of Datel Ltd.
Game Talk Pro‐2 Wireless for PS3 is a 100% unofficial product and is
NOT sponsored, endorsed or approved by SONY, nor any games
developer or publisher. PLAYSTATION and PS3 are a registered
trademarks or trademarks of SONY in the United States and/or
other
countries. The Bluetooth word mark, figure mark, and combination
mark are all trademarks of the Bluetooth SIG.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Vincent
Create Date                     : 2011:09:26 16:09:38+08:00
Modify Date                     : 2011:09:26 16:27:27+07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2011:09:26 16:27:27+07:00
Format                          : application/pdf
Creator                         : Vincent
Title                           : Microsoft Word - PS3_Game_Talk_Pro-2_Wireless User manual.rtf
Document ID                     : uuid:76421d2f-7b36-4672-bbda-40412cb49263
Instance ID                     : uuid:06f55aa5-c311-4683-8b47-4f46d83408fd
Page Count                      : 8

EXIF Metadata provided by EXIF.tools