Datto MR1750 Wireless a/b/g/n/AC Access Point User Manual UM MR1750 140126

Open Mesh, Inc. Wireless a/b/g/n/AC Access Point UM MR1750 140126

User Manual.pdf

1  OPEN MESH    Wireless-N / AC Long Range Ceiling Mount Dual Concurrent                       MR1750      Wireless-N / AC Long Range Ceiling Mount Dual Concurrent Access Point     V1.0  Long Range Ceiling Mount Dual Concurrent Access PointLong Range Ceiling Mount Dual Concurrent Access Point oint
1  Table of Contents 1 Introduction ....................................................................................................................................................................... 5 1.1 Features and Benefits ..................................................................................................................................................................................... 6 1.2 Package Contents ............................................................................................................................................................................................ 7 1.3 System Requirements ..................................................................................................................................................................................... 7 1.4 Applications ....................................................................................................................................................................................................... 7 2 Before you Begin ............................................................................................................................................................... 9 2.1 Considerations for Wireless Installation .................................................................................................................................................. 9 2.2 Computer Settings (in Windows XP/Windows 7) .............................................................................................................................. 10 2.3 Computer Settings in Apple Mac OS X ................................................................................................................................................. 13 2.4 Hardware Installation ................................................................................................................................................................................... 14 3 Configuring Your Access Point ...................................................................................................................................... 19 3.1 Default Settings ............................................................................................................................................................................................. 19 3.2 Web Configuration ....................................................................................................................................................................................... 20 4 Building a Wireless Network .......................................................................................................................................... 22 4.1 Access Point Mode ....................................................................................................................................................................................... 22 4.2 WDS AP Mode ............................................................................................................................................................................................... 23 4.3 WDS Bridge Mode ........................................................................................................................................................................................ 24 4.4 Repeater mode .............................................................................................................................................................................................. 25 5 Status ................................................................................................................................................................................ 26 5.1 Save/Reload .................................................................................................................................................................................................... 26 5.2 Main ................................................................................................................................................................................................................... 27 5.3 2.4G/5G Wireless Client List ...................................................................................................................................................................... 30 5.4 2.4G/5G Connection Status ....................................................................................................................................................................... 31 5.5 2.4G/5G WDS Link List ................................................................................................................................................................................ 32
2  5.6 System Log ...................................................................................................................................................................................................... 33 6 System .............................................................................................................................................................................. 34 6.1 Operation Mode ............................................................................................................................................................................................ 34 6.2 IP Settings ........................................................................................................................................................................................................ 35 6.3 Spanning Tree Setting ................................................................................................................................................................................. 36 7 2.4G/5G Wireless ............................................................................................................................................................. 38 7.1 Wireless Network .......................................................................................................................................................................................... 38 7.2 Wireless Security ........................................................................................................................................................................................... 45 7.3 Site Survey ....................................................................................................................................................................................................... 49 7.4 Wireless MAC Filtering ................................................................................................................................................................................ 53 7.5 Wireless Advanced ....................................................................................................................................................................................... 55 7.6 WPS (Wi-Fi Protected Setup) .................................................................................................................................................................... 57 7.7 WDS Link Settings ......................................................................................................................................................................................... 60 8 Management .................................................................................................................................................................... 63 8.1 Administration ................................................................................................................................................................................................ 63 8.2 Management VLAN Settings .................................................................................................................................................................... 64 8.3 Wireless Traffic Shaping ............................................................................................................................................................................. 66 8.4 SNMP Settings ............................................................................................................................................................................................... 67 8.5 Backup/Restore .............................................................................................................................................................................................. 69 8.6 Auto Reboot Settings .................................................................................................................................................................................. 70 8.7 Firmware Upgrade ........................................................................................................................................................................................ 71 8.8 Time Setting .................................................................................................................................................................................................... 72 8.9 Log ...................................................................................................................................................................................................................... 73 8.10 Diagnostics ...................................................................................................................................................................................................... 74 8.11 LED Control ..................................................................................................................................................................................................... 75 8.12 Logout ............................................................................................................................................................................................................... 76 8.13 Reset .................................................................................................................................................................................................................. 77
3  Appendix A – FCC Interference Statement .......................................................................................................................... 78 Appendix B – IC Interference Statement ............................................................................................................................. 78 Appendix C – CE Interference Statement ............................................................................................................................. 79
4  Revision History Version Date Notes 1.0 2013/07/31 First Release
5  1 Introduction The MR1750 is  a  high-powered,  long-range  dual-band  concurrent  wireless  802.11a/b/g/n/ac  access  point  with  four major  functional  modes.  The  MR1750  is  designed  to  operate  in  numerous  environments  from  large  homes,  small  and medium-sized  businesses,  multiple-floor  offices,  hotels  and  other  venues  to  larger  enterprise  deployments.  Its  high-powered, long-range characteristics make it a cost-effective alternative to ordinary access points that don’t have the range and reach to connect to a growing number of wireless users who wish to connect to a large home or business network.  The MR1750 supports the 2.4GHz frequency band under 802.11 b/g/n mode while at the same time providing 5GHz band for communicating or transferring files in a less congested network frequency band.  The MR1750 delivers up to 6x faster wireless speeds and 7x extended coverage than legacy 802.11a/b/g wireless devices. Even though the MR1750 has been designed and engineered for traffic heavy and demanding business environments it is also quite at home in larger house scenarios because it efficiently extends the wireless range of an existing home router, especially in very architecturally-challenging structures to provide whole home connectivity.  To  protect  sensitive  data  during  wireless  transmissions,  the  MR1750  offers  different  encryption  settings  for  wireless transmissions including industry-standard WPA and WPA2 encryption. The MR1750 also includes MAC address filtering to allow  network  administrators  to  offer  network  access  only  to  known  computers  and other  devices  based  on  their  MAC addresses.
6  1.1 Features and Benefits Features  Benefits High Speed Data Rate Up to 300 Mbps for each band (2.4GHz / 5GHz) Capable of handling heavy data payloads such as HD multimedia streaming. 10/100/1000 Gigabit Ethernet  Support up to 1000Mbps wired networking speed. IEEE 802.11n Compliant and Backwards Compatible with 802.11 a/b/g devices Fully compatible with IEEE 802.11 a/b/g/n devices. Multi-Function  Allowing users to select any one of the following modes: Access Point, WDS AP, WDS Bridge, and Repeater depending on their specific networking deployment need. Support Multiple SSID in AP mode (up to 8 in each frequency band) Allow clients to access different networks through a single access point and assign different policies and functions for each SSID through the built in software. WPA/WPA2/IEEE 802.1x Support  Powerful data security. MAC Address Filtering in AP Mode  For more secure network connections with known users and devices. User Isolation Support (AP mode)  Offers an additional layer of protection within the network by isolating specific client users. Power-over-Ethernet (IEEE802.3at/af)  Allows installers to deploy the access point in locations via a PoE connection (Ethernet cable) where a power outlet may not be available. Save User Settings  Enables network administrators to save their device settings so firmware upgrades do not permanently delete previous device settings. SNMP Remote Configuration Management  Allows remote connection to configure or manage the MR1750 easily. QoS (WMM) support  Prioritizes bandwidth-intensive and sensitive data traffic.
7  1.2 Package Contents The MR1750 package contains the following items (all items must be in package to issue a refund):  MR1750 Access Point  Wall Mount Kit: Mounting Bracket, Wall/Ceiling Mounting Hardware Kit, T-Rail Mounting Hardware Kit  1.3 System Requirements The following are the Minimum System Requirements in order configure the device.  Computer with an Ethernet interface or wireless network capability  Windows OS (XP, Vista, 7), Mac OS, or Linux-based operating systems  Web-Browsing Application (i.e.: Internet Explorer, Firefox, Safari, or another similar browser application)  1.4 Applications Wireless  LAN  (WLAN)  products  are  easy  to  install  and  highly  efficient.  The  following  list  describes  some  of  the  many applications made possible through the power and flexibility of WLANs: a) Difficult-to-Wire Environments There are many situations where wires cannot be installed or deployed easily or cannot be hidden from view. Older buildings,  sites  with  multiple  buildings,  and/or  areas  make  the  installation  of  a  Ethernet-based  LAN  impossible, impractical or expensive. b) Temporary Workgroups Create  temporary  workgroups/networks  in  more  open  areas  within  a  building  –  auditoriums,  amphitheater classrooms,  ballrooms,  arenas,  exhibition  centers,  temporary  offices  where  one  wants  either  a  permanent  or temporary Wireless LAN established.
8  c) The Ability to Access Real-Time Information Doctors/Nurses, Point-of-Sale Employees, and/or Warehouse Workers can access real-time information while dealing with patients, serving customers, and/or processing information. d) Frequently Changing Environments Set up networks in environments that change frequently (i.e.: Show Rooms, Exhibits, etc.). e) Small Office and Home Office (SOHO) Networks SOHO users need a cost-effective, easy and quick installation of a small network. f) Wireless Extensions to Existing Ethernet-based Networks Devices like the MR1750 enable network administrators, installers and end-users to extend the range and reach of an existing Ethernet-based network. g) Training/Educational Facilities Training  sites  at  corporations  or  students  at  universities  use  wireless  connectivity  to  ease  access  to  information, information exchanges, and learning.
9  2 Before you Begin This  section  will  guide  you  through  the  installation  process.  Placement  of  the  OPEN  MESH  MR1750  is  essential  to maximize the access  point’s  performance.  Avoid placing the MR1750  in  an  enclosed space such as  a closet,  cabinet,  or stairwell.  2.1 Considerations for Wireless Installation The operating  distance of all wireless devices cannot  be pre-determined due to  a number of unknown obstacles in the environment that the device is deployed in. These could be the number, thickness, and location of walls, ceilings, or other objects that the MR1750’s wireless signals must pass through. Here are some key guidelines to allow the MR1750 to have optimal wireless range.   Keep the number of walls and/or ceilings between the MR1750 and other network devices to a minimum. Each wall and/or ceiling can reduce the signal strength, resulting in lower signal strength.   Building materials makes a difference. A solid metal door and/or aluminum stubs may have a significant negative effect on the signal strength of the MR1750. Locate your wireless devices carefully so the signal can pass through a drywall and/or open doorways. Materials such as glass, steel, metal, concrete, water (example: fish tanks), mirrors, file cabinets and/or brick can also diminish wireless signal strength.   Interference from your other electrical devices and/or appliances that generate RF noise can also diminish the MR1750’s signal strength.  The most common types of devices are microwaves or cordless phones.
10  2.2 Computer Settings (in Windows XP/Windows 7) In order to use the MR1750, you must first configure the TCP/IPv4 connection of your Windows OS computer system.   Click Start button and open Control Panel.                  Windows XP                                                          Windows 7
11   In Windows XP, click Network Connections     In Windows 7, click View Network Status and Tasks in the Network and Internet section, then select Change adapter settings           Right click on Local Area Connection and select Properties
12    Select “Internet Protocol Version 4 (TCP/IPv4)” and then   select Properties          Select Use the following IP address and enter an IP address that is different from the MR1750 and subnet mask then click OK. Note: Ensure that the IP address and subnet mask are on the same subnet as the device.   For example:  MR1750 IP address: 192.168.1.1 PC IP address: 192.168.1.2 – 192.168.1.255   PC subnet mask: 255.255.255.0
13  2.3 Computer Settings in Apple Mac OS X Go to System Preferences (can be opened in the  Select Network in the Internet & Network Highlight Ethernet  In Configure IPv4, select Manually  Enter an IP address that is different from the Note: Ensure that the IP address and subnet mask are on the same subnet as the device.  For example:  MR1750 IP address: 192.168.1.1PC IP address: 192.168.1.2 – 192.168.1.25  PC subnet mask: 255.255.255.0 Click Apply when done.  Computer Settings in Apple Mac OS X can be opened in the Applications folder or selecting it in the Apple Internet & Network section that is different from the MR1750 and subnet mask then press OK Ensure that the IP address and subnet mask are on the same subnet as the device.   IP address: 192.168.1.1 192.168.1.255 PC subnet mask: 255.255.255.0  or selecting it in the Apple Menu)
14  2.4 Hardware Installation 1. Ensure that the computer in use has an Ethernet Controller (RJ-45 Ethernet Port). For more information, verify with your computer’s user manual. 2. Connect one end of the Category 5e Ethernet cable into the RJ-45 port of the MR1750 and the other end to the RJ-45 port of the computer. Ensure that the cable is securely connected to both the MR1750 and the computer. 3. Connect the Power Adapter DC connector to the DC-IN port of the MR1750 and the Power Adapter to an available electrical outlet. Once both connections are secure, verify the following: a) Ensure that the POWER light is on (it will be orange). b) Ensure that the 2.4GHz/5GHz WLAN light is on (it will be green for 5G, blue for 2.4G). c) Ensure that the LAN (Computer/MR1750 Connection) light is on (it will be blue). d) Once all three lights are on, proceed to set up the access point using the computer.  This diagram depicts the hardware configuration.
15  Mounting the MR1750 Using the provided hardware, the MR1750 can be attached to a ceiling or wall.  To attach the MR1750 to a ceiling or wall using the mounting bracket: 1) Attach the mounting bracket to the wall or ceiling using the provided wall/ceiling mounting hardware kit. 2) Insert the provided short screws into the bottom cover of the MR1750.  Leave enough of the screws exposed to ensure that the unit can be attached to the mounting bracket. If extra space is required, use the provided spacers and long screws from the T-Rail mounting hardware kit to increase the space between the unit and the mounting bracket.
16  3) Mount the MR1750 on the mounting bracket by rotating the unit clockwise about 90 degrees to secure it in place.  To attach the MR1750 to a ceiling using the provided T-rail connectors: 1) Attach the T-rail connectors to the bottom cover of the MR1750 using the provided short screws. Two sizes of T-rail connectors are included in the mounting hardware kit: 15/16in (2.38cm) and 9/16in (1.43cm). If extra space is required to accommodate drop ceiling tiles, use the provided spacers and long screws.
17  2) Line up the connected T-rail connectors with an appropriately sized rail and press the unit onto the rail until it snaps into place.   Note: To protect your MR1750, use the Kensington security slot to attach a cable lock (cable lock is not included).
18                      Front Panel                                                                       Rear Panel Front Panel Reset Button One click for reset the device. Press over 10 seconds for reset to factory default. LED Lights LED lights for WPS, WLAN 5G, WLAN 2.4G, Ethernet port and Power. Rear Panel Power DC IN for Power. Ethernet Port Ethernet port for RJ-45 cable. Ceiling (Wall) Mount Hole Using the provided hardware, the MR1750 can be attached to a ceiling or wall. Kensington Security Slot To protect your MR1750, use the Kensington security slot to attach a cable lock.
19  3 Configuring Your Access Point This section will show you how to configure the device using the web-based configuration interface. 3.1 Default Settings Please use your Ethernet port or wireless network adapter to connect the Access Point.                                             Default Settings IP Address 192.168.1.1 Username / Password admin / admin Operation Mode AP / AP
20  3.2 Web Configuration  Open a web browser (Internet Explorer/Firefox/Safari) and enter the IP Address http://192.168.1.1 Note: If you have changed the default LAN IP Address of the Access Point, ensure you enter the correct IP Address.     The default username and password are admin. Once you have entered the correct username and password, click the Login button to open the web-base configuration page.
21   If successful, you will be logging in and see the MR1750 User Menu.
22  4 Building a Wireless Network The MR1750 has the ability to operate in various modes. This chapter describes the operating modes of the MR1750. 4.1 Access Point Mode In Access Point Mode, MR1750 behaves likes a central connection for stations or clients that support IEEE 802.11a/b/g/n/ac networks. The stations and clients must be configured to use the same SSID (Service Set Identifier) and security password to associate with the MR1750. The MR1750 supports up to eight SSIDs at the same time for secure access.
23  4.2 WDS AP Mode The MR1750 also supports WDS AP mode. This operating mode allows wireless connections to the MR1750 using WDS technology. In this mode, configure the MAC addresses in both Access Points to enlarge the wireless area by enabling WDS Link settings. WDS supports four AP MAC addresses.
24  4.3 WDS Bridge Mode In WDS Bridge Mode, the MR1750 can wirelessly connect different LANs by configuring the MAC address and security settings of each MR1750 device. Use this mode when two wired LANs located a small distance apart want to communicate with each other. The best solution is to use the MR1750 to wirelessly connect two wired LANs, as shown in the following figure.  WDS Bridge Mode can establish four WDS links, creating a star-like network.     Note: WDS Bridge Mode does not act as an Access Point. Access Points linked by WDS are using the same frequency channel. More Access Points connected together may lower throughput. This configuration can be susceptible to generate endless network loops in your network, so it is recommended to enable the Spanning Tree function to prevent this from happening.
25  4.4 Repeater mode The Repeater mode is used to regenerate or replicate signals from a wireless router or other access point/station that is unable to reach certain areas in a building. When this mode is activated in the MR1750, the MR1750 receives the wireless signal from an existing router or AP and relays it to other devices within its range so they can join the network.
26  5   Status The  Status  section  contains  the  following  options:  Main,  2.4G/5G  Wireless  Client  List,  2.4G/5G  Connection  Status, 2.4G/5G WDS Link List and System Log. The following sections describe these options. 5.1 Save/Reload This page lets you save and apply the settings shown under Unsaved  changes  list, or cancel the unsaved changes and revert them to the previous settings that were in effect.
27  5.2 Main Clicking the Main link under the Status menu or clicking Home at the top-right of the MR1750 Page shows the status information about the current operating mode.     - The System Information section shows general system information such as Device Name, MAC Address, Current Time, Firmware Version, and Management VLAN ID (Note: VLAN ID is only applicable in Access Point or WDS AP mode).
28  - The LAN  Settings section shows the Local Area Network settings such as the LAN IP Address, Subnet Mask, and DNS Address.     -  The Current 2.4G/5G  Wireless Settings section shows wireless information such as Operating Mode, Frequency, and Channel.  Since  the  MR1750  supports  multiple-SSIDs,  information  about  each  SSID,  the  ESSID  and  security  settings,  are displayed (Note: Profile Settings is only applicable in Access Point, WDS AP).
29
30  5.3 2.4G/5G Wireless Client List Clicking  the  2.4G/5G  Wireless  Client  List  link  under  the  Status  menu  displays  the  list  of  clients  associated  to  the MR1750’s 2.4GHz/5GHz, along with the MAC addresses and signal strength for each client. Clicking Refresh updates the client list. Note: Only applicable in Access Point, WDS AP, and Repeater mode.
31  5.4 2.4G/5G Connection Status Click on the 2.4G/5G Connection Status link under the Status menu. This page displays the current status of the Network, including Network Type, SSID, BSSID, Connection Status, Wireless Mode, Current Channel, Security, Data Rate, Noise Level, and Signal Strength.   Note: Only applicable in Repeater mode.
32  5.5 2.4G/5G WDS Link List Click on the 2.4G/5G WDS  Link  List link under the Status menu. This page displays the current status of the WDS link, including WDS Link ID, MAC Address, Link Status and RSSI. Note: Only applicable in WDS AP and WDS Bridge mode.
33  5.6 System Log The MR1750 automatically logs (records) events of possible interest in its internal memory. To view the logged information, click the System Log link under the Status menu. If there is not enough internal memory to log all events, older events are deleted from the log. When powered down or rebooted, the log will be cleared.  System Log Refresh Update the log. Clear Clear the log.
34  6 System 6.1 Operation Mode The MR1750 supports four operating modes: Access Point, WDS AP, WDS Bridge, and Repeater.    System Properties Device Name Enter a name for the device. The name you type appears in SNMP management. This name is not the SSID and is not broadcast to other devices. Operation Mode Use the radio button to select an operating mode. Save & Apply / Cancel Click Save & Apply to confirm the changes or Cancel to cancel and return previous settings.
35  6.2 IP Settings This page allows you to modify the device's IP settings.    IP Settings IP Network Setting Select whether the device IP address will use the static IP address specified in the IP Address field or be obtained automatically when the device connects to a DHCP server. IP Address The IP Address of this device. IP Subnet Mask The IP Subnet Mask of this device. Default Gateway The Default Gateway of this device. Leave it blank if you are unsure of this setting. Primary / Secondary DNS The primary / secondary DNS address for this device.
36  6.3 Spanning Tree Setting This page allows you to modify the Spanning Tree settings. Enabling Spanning Tree protocol will prevent network loops in your LAN network.    Spanning Tree Spanning Tree Status Enable or disable the Spanning Tree function. Bridge Hello Time Specify Bridge Hello Time, in seconds. This value determines how often the device sends handshake packets to communicate information about the topology throughout the entire Bridged Local Area Network. Bridge Max Age Specify Bridge Max Age, in seconds. If another bridge in the spanning tree does not send a hello packet for a long period of time, it is assumed to be dead. Bridge Forward Delay Specify Bridge Forward Delay, in seconds. Forwarding delay time is the time spent in each of the Listening and Learning states before the Forwarding state is entered. This delay is provided so that when a new bridge comes onto a busy network, it analyzes data traffic before
37  participating. Priority Specify the Priority Number. A smaller number has greater priority. Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings.
38  7 2.4G/5G Wireless 7.1 Wireless Network This page displays the current status of the Wireless settings of the MR1750. Access Point / WDS AP mode:
39    2.4G/5G Wireless Network (Access Point / WDS AP mode) Wireless Mode Wireless mode supports 802.11b/g/n mixed mode in 2.4G and 802.11a/n mixed mode in 5G. Channel HT Mode The default channel bandwidth is 20/40MHz. The larger the channel, the better the transmission quality and speed. Extension Channel Select upper or lower channel. Your selection may affect the Auto channel function. Channel / Frequency Select the channel and frequency appropriate for your country’s regulation.
40  Auto Check this option to enable auto-channel selection. AP Detection AP Detection can select the best channel to use by scanning nearby areas for Access Points. Current Profile Configure up to eight different SSIDs (four in WDS AP mode). If many client devices will be accessing the network, you can arrange the devices into SSID groups. Click Edit to configure the profile and check whether you want to enable extra SSID. Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings.
41  2.4G/5G SSID Profile
42  2.4G/5G SSID Profile SSID Specify the SSID for the current profile. Suppressed SSID Check this option to hide the SSID from clients. If checked, the SSID will not appear in the site survey. Station Separation Click the appropriate radio button to allow or prevent communication between client devices. Wireless Security See the Wireless Security section. Save / Cancel Click Save to accept the changes or Cancel to cancel and return previous settings.
43  Repeater mode:
44   2.4G/5G Wireless Network (Repeter mode) Wireless Mode Wireless mode supports 802.11b/g/n mixed mode in 2.4G and 802.11a/n mixed mode in 5G. SSID The SSID is a unique named shared amongst all the points of the wireless network. The SSID must be identical on all points of the wireless network and cannot exceed 32 characters. You may specify an SSID or select one from the Site Survey. Site Survey Click on Site Survey to search the existing Access Points. Preferred BSSID Specify the BSSID (Access Point’s MAC Address). Wireless Security The encryption is using. It must the same as Access Point’s encryption. Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings.
45  7.2 Wireless Security The Wireless Security section lets you configure the MR1750's security modes: WEP, WPA-PSK, WPA2-PSK, WPA-PSK Mixed, WPA, WPA2, and WPA Mixed. It is strongly recommend to use WPA2-PSK.  WEP Encryption:   WEP Encryption Auth Type Select Open System or Shared Key. Input type ASCII: Regular Text (recommended) HEX: Hexadecimal Numbers (For advanced users) Key Length Select the desired option and ensure the wireless clients use the same setting. Choices are 64, 128, 152-bit password lengths. Default Key Select the key you wish to be default. Transmitted data is ALWAYS encrypted using the Default Key; the other Keys are for decryption only.
46  You must enter a Key Value for the Default Key. Encryption Key # Enter the key value or values you wish to use. Only the Key selected as Default is required. The others are optional.   WPA-PSK (WPA Pre-Shared Key) Encryption:    WPA-PSK (WPA Pre-Shared Key) Encryption Encryption Select the WPA encryption type you would like. Please ensure that your wireless clients use the same settings. Passphrase Wireless clients must use the same key to associate the device. If using ASCII format, the Key must be from 8 to 63 characters in length. If using HEXformat, the Key must be 64 HEX characters in length. Group Key Update Interval Specify how often, in seconds, the group key changes.
47    WPA Encryption: Only in Access Point / WDS AP mode   WPA Encryption Encryption Select the WPA encryption type you would like. Please ensure that your wireless clients use the same settings. Radius Server Enter the IP address of the Radius server. Radius Port Enter the port number used for connections to the Radius server. Radius Secret Enter the secret required to connect to the Radius server. Group Key Update Interval Specify how often, in seconds, the group key changes.
48  Radius Accounting Enable or disable accounting feature. Radius Accounting Server Enter the IP address of the Radius accounting server. Radius Accounting Port Enter the port number used for connections to the Radius accounting server. Radius Accounting Secret Enter the secret required to connect to the Radius accounting server. Interim Accounting Interval Specify how often, in seconds, the accounting data sends.   Note:  802.11n does not allow WEP/WPA-PSK TKIP/WPA2-PSK TKIP security mode. The connection mode will automatically change from 802.11n to 802.11g.
49  7.3 Site Survey Use this feature to scan nearby Access Points. Note: Only applicable in Repeater mode.  1. Click Site Survey.
50  2. Scanning the nearby Access Points   3. The MR1750 will list the available access points after site survey.
51  Site Survey (Repeater mode) BSSID Access Point's wireless MAC address. SSID SSID that the Access Point is broadcasting. Channel Channel that the Access Point is using. Signal Level (dBm) Signal strength from the Access Point to your station. Type The band that the Access Point is using. Security Encryption method that the Access Point is using to secure data over the WLAN. Refresh Click Refresh to rescan nearby Access Point.  4. Select an Access Point and click that Access Point’s BSSID.
52  5. Enter the correct security setting.
53  7.4 Wireless MAC Filtering Wireless  MAC  Filtering  is  used  to  allow  or  deny  network  access  to  wireless  clients  (computers,  tablet  PCs,  NAS, smartphones, etc.) according to their MAC addresses. You can manually add a MAC address to restrict the permission to access MR1750. The default setting is Disable Wireless MAC Filter. Note: Only applicable in Access Point and WDS AP mode.
54  Wireless MAC Filter (Access Point / WDS AP mode) ACL Mode Determines whether network access is granted or denied to clients whose MAC addresses appear in the MAC Address table on this page. Choices are: Disabled, Deny MAC in the list, or Allow MAC in the list. MAC Address Enter the MAC address of the wireless client. Add Click Add to add the MAC address to the MAC Address table. Delete Delete the selected entries. Apply Click Apply to apply the changes.
55  7.5 Wireless Advanced This page allows you to configure wireless advance settings. It is recommended that the default settings are used unless the user has experience with more advanced networking features.
56    2.4G/5G Wireless Advanced Data Rate Select a data rate from the drop-down list. The data rate affects throughput of data in the MR1750. The lower the data rate, the throughput will be lower, but so will the transmission distance. Transmit Power Set the power output of the wireless signal. RTS/CTS Threshold Specify the threshold package size for RTC/CTS. A small number causes RTS/CTS packets to be sent more often and consumes more bandwidth. Distance Specify the distance between Access Points and clients. Longer distances may drop high-speed connections. Aggregation Merges data packets into one packet. This option reduces the number of packets, but increases packet sizes. Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings.
57  7.6 WPS (Wi-Fi Protected Setup) Wi-Fi Protected  Setup  (WPS)  feature complies  with  the  Wi-Fi  Alliance  WPS  standard  and  makes  it  easier  to quickly  add client devices to an established, security-enabled Wi-Fi network.  WPS  reduces  the  user  steps  required  to  configure  a  network  and  supports  two  methods  that  are  familiar  to  most consumers to configure a network and enable security. Note: Only applicable in Access Point and WDS AP mode.
58     WPS (Wi-Fi Protected Setup) WPS Select to Enable or Disable the WPS feature. WPS Current Status Shows whether the WPS function is Configured or unConfigured.  When it is Configured, the WPS has been used to authorize connection between the device and wireless clients. Self Pin Code The PIN code of this device. SSID The SSID (wireless network name) used when connecting using WPS. Authentication Mode Shows the encryption method used by the WPS process. Passphrase Key This is the passphrase key that is randomly generated during the WPS process. It is required if wireless clients that do not support WPS attempts to connect to the wireless network. WPS via Push Button Click this button to initialize WPS feature using the push button method.
59  WPS via PIN Enter the PIN code of the wireless device and click this button to initialize WPS feature using the PIN method.
60  7.7 WDS Link Settings Using  WDS  (Wireless  Distribution  System)  will  allow  a  network  administrator  or  installer  to  connect  to  Access  Points wirelessly.  Doing  so  will  extend  the  wired  infrastructure  to  locations  where  cabling  is  not  possible  or  inefficient  to implement. Note: Compatibility between different brands and models of access points is not guaranteed. It is recommended that the WDS network be created using the same models for maximum compatibility. Also note: All Access Points in the WDS network needs to use the same Channel and Security settings. To create a WDS network, please enter the MAC addresses of the Access Points that you want included in the WDS. There can be a maximum of four access points. Note: Only applicable in WDS AP and WDS Bridge mode.
61
62    2.4G/5G WDS Link Settings Security Select None or AES from drop-down list. AES Passphrase Enter the key values you wish to use.  Other AP(s) must use the same key to establish WDS link. MAC Address Enter the Access Point’s MAC address to which you want to extend the wireless area. Mode Select Disable or Enable from the drop-down list. Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings.
63  8 Management  8.1 Administration This page allows you to change the MR1750 username and password. By default, the username is admin and the password is: admin. The password can contain 0 to 12 alphanumeric characters and is case sensitive.    Login Setting New Name Enter a new username for logging in to the New Name entry box. Old Password Enter the old password for logging in to the Old Password entry box. New Password Enter the new password for logging in to the New Password entry box. Confirm Password Re-enter the new password in the Confirm Password entry box for confirmation. Save/Apply / Cancel Click Save/Apply to apply the changes or Cancel to return previous settings.
64  8.2 Management VLAN Settings This page allows you to assign a VLAN tag to the packets. A VLAN is a group of computers on a network whose software has been configured so that they behave as if they were on a separate Local Area Network (LAN). Computers on VLAN do not have to be physically located next to one another on the LAN. Note: Only applicable in Access Point and WDS AP mode.    Management VLAN (Only applicable in Access Point mode) Profile Isolation Restricted client to communicate with different VID by selecting the radio button. VLAN ID Specify the VLAN tag for each profile. Management VLAN ID If your network includes VLANs, you can specify a VLAN ID for packets pass through the Access Point with a tag. Otherwise, select No VLAN tag.
65  Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings.  Note:  1. If you reconfigure the Management VLAN ID, you may lose your connection to the MR1750. Verify that the DHCP server supports the reconfigured VLAN ID and then reconnect to the MR1750 using the new IP address.  2. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 5.1).
66  8.3 Wireless Traffic Shaping Traffic shaping regulates the flow of packets leaving an interface to deliver improved Quality of Service.    Wireless Traffic Shaping Enable Traffic Shaping Check this option to enable wireless traffic shaping. Incoming Traffic Limit Specify the wireless transmission speed used for downloading. Outgoing Traffic Limit Specify the wireless transmission speed used for uploading. Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings.
67  8.4 SNMP Settings This page allows you to assign the Contact Details, Location, Community Name, and Trap Settings for Simple Network Management Protocol (SNMP). This is a networking management protocol used to monitor network attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of the network. Upon receiving these messages, SNMP compatible devices (called agents) return the data stored in their Management Information Bases.
68  SNMP SNMP Enable/Disable Enable or Disable SNMP feature. Contact Specify the contact details of the device Location Specify the location of the device. Community Name (Read Only) Specify the password for the SNMP community for read only access. Community Name (Read/Write) Specify the password for the SNMP community with read/write access. Trap Trap Destination Address Specify the IP address of the computer that will receive the SNMP traps. Trap Destination Community Name Specify the password for the SNMP trap community. SNMPv3 SNMPv3 Enable/Disable Enable or Disable SNMPv3 feature. User Name Specify the username for SNMPv3. Auth Protocol Select the authentication protocol type: MDS or SHA. Auth Key Specify the authentication key for authentication. Priv Protocol Select the privacy protocol type: DES. Priv Key Specify the privacy key for privacy. Engine ID Specify the engine ID for SNMPv3. Save/Apply / Cancel Click Save/Apply to apply the changes or Cancel to return previous settings.
69  8.5 Backup/Restore This page allows you to save the current device configurations. When you save the configurations, you also can reload the saved configurations into the device through the Restore Saved Settings from A File section. If extreme problems occur, or if you have set the MR1750 wrongly, you can use the Factory Default button in the Revert to Factory Default Settings section to restore all the configurations of the MR1750 to the original default settings.    Backup/Restore Save A Copy of Current Settings Click Backup to save the current configured settings. Restore Saved Settings from A File To restore settings that have been previously backed up, click Browse, select the file, and click Restore. Revert to Factory Default Settings Click Factory Default button to restore the MR1750 to its factory default settings.
70  8.6 Auto Reboot Settings You can specify how long to reboot the MR1750 periodically.    Auto Reboot Settings Auto Reboot Setting Enable or disable the auto reboot function. Frequency of Auto Reboot To specify the time to reboot the MR1750 by Min, Hour, Day or Week. Save/Apply / Cancel Click Save/Apply to apply the changes or Cancel to return previous settings.
71  8.7 Firmware Upgrade This page allows you to upgrade the firmware of the MR1750.    To perform the Firmware Upgrade: 1. Click the Browse button and navigate the OS File System to the location of the upgrade file. 2. Select the upgrade file. The name of the file will appear in the Upgrade File field. 3. Click the Upload button to commence the firmware upgrade.  Note: The device is unavailable during the upgrade process and must restart when the upgrade is completed. Any connections to or through the device will be lost.
72  8.8 Time Setting This page allows you to set the internal clock of the MR1750.    Time Manually Set Date and Time Manually specify the date and time. Automatically Get Date and Time Select a time zone from the drop-down list and check whether you want to enter the IP address of an NTP server or use the default NTP server to get have the internal clock set automatically. Enable Daylight Saving Check whether daylight savings applies to your area.
73  8.9 Log This page allows you to setup Syslog and local log functions of the MR1750.    Log Syslog  Enable or disable the syslog function. Log Server IP Address Enter the IP address of the log server. Local Log Enable or disable the local log service. Save/Apply / Cancel Click Save/Apply to apply the changes or Cancel to return previous settings.
74  8.10 Diagnostics This page allows you to analyze the connection quality of the MR1750 and trace the routing table to a target in the network.   Diagnosis Target IP Enter the IP address you would like to search. Ping Packet Size Enter the packet size of each ping. Number of Pings Enter the number of times you want to ping. Start Ping Click Start Ping to begin pinging target device (via IP). Traceroute Target Enter an IP address or domain name you want to trace. Start Traceroute Click Start Traceroute to begin the trace route operation.
75  8.11 LED Control This page allows you to control LED on/off for Power, LAN interface, 2.4G/5G WLAN interface and WPS.
76  8.12 Logout Click [Logout] in Management menu to logout.
77  8.13 Reset In some circumstances, it may be required to force the device to reboot. Click on Reboot the Device to reboot the MR1750.
78  Appendix A – FCC Interference Statement  Federal Communication Commission Interference Statement  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -  Reorient or relocate the receiving antenna. -  Increase the separation between the equipment and receiver. -  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -  Consult the dealer or an experienced radio/TV technician for help.  FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.  IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 30cm between the radiator & your body.
79   Appendix B – IC Interference Statement  Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.  Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement: (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 30cm between the radiator & your body.
80   Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 30cm de distance entre la source de rayonnement et votre corps.   Appendix C – CE Interference Statement 1.1.  Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: -  EN60950-1 -  Safety of Information Technology Equipment -   -  EN50385 -  Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) -   -  EN 300 328 -  Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive  EN 301 893  Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive  EN 301 489-1  Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements  -  EN 301 489-17 -  Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment  This device is a 5GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services.
81  This device may not be used for setting up outdoor radio links in France and in some areas the RF output pthe frequency range of 2454 – 2483.5 MHz. For detailed information the end0560 Česky [Czech] [Jméno výrobce] tímto prohlašuje, že tento dalšími příslušnými ustanoveními smDansk [Danish] Undertegnede [fabrikantens navn]typebetegnelse] overholder de væsentlige krav og øvrige relevante kraDeutsch [German] Hiermit erklärt [Name des Herstellers]den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.Eesti [Estonian] Käesolevaga kinnitab equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.English  Hereby, [name of manessential requirements and other relevant provisions of Directive 1999/5/EC.Español [Spanish] Por medio de la presente los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣFrançais [French] Par la présente [nom du fabricant]exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CItaliano [Italian] Con la presente [nome del costruttore]requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.Latviski [Latvian] Ar šo [name of manufactureriekārtas tips] atbilst Direktnoteikumiem. Lietuvių [Lithuanian]  Šiuo [manufacturer name]kitas 1999/5/EB Direktyvos nuostatas.Nederlands [Dutch] Hierbij verklaart [naam van de fabrikant]met de essentiële eisen en de andere relevantMalti Hawnhekk, [isem talThis device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a íslušnými ustanoveními směrnice 1999/5/ES. [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.[Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. ΠΑΡΟΥΣΑ [name of manufacturer] ∆ΗΛΩΝΕΙ ΟΤΙ [type of equipment] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕΚ. [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. [name of manufacturer  / izgatavotāja nosaukums] deklarē, ka [type of equipment / atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. sem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġower may be limited to 10 mW EIRP in user should contact the national spectrum authority in France.  se základními požadavky a v i direktiv 1999/5/EF. in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie [seadme tüüp = type of vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele is in compliance with the cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la est conforme aux  è conforme ai  [type of equipment / ītajiem atitinka esminius reikalavimus ir in overeenstemming is ħtiġijiet
82  [Maltese] essenzjali u ma provvedimenti oMagyar [Hungarian] Alulírott, [gyártó nevekövetelményeknek és az 1999/5/EC irányelv egyéb elõírásainakPolski [Polish] Niniejszym [nazwa producenta]wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.Português [Portuguese] [Nome do fabricante]essenciais e outras disposições da DiSlovensko [Slovenian] [Ime proizvajalca] izjavlja, da je ta relevantnimi določili direktive 1999/5/ES.Slovensky [Slovak] [Meno výrobcu] týmto vyhlasuje, že príslušné ustanovenia Smernice 1999/5/ES.Suomi [Finnish] [Valmistaja = manufacturer]tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten jmuiden ehtojen mukainen.Svenska [Swedish] Härmed intygar [företag]egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.  essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. [Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi čili direktive 1999/5/ES. týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä]tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. jest zgodny z zasadniczymi está conforme com os requisitos v skladu z bistvenimi zahtevami in ostalimi a základné požiadavky a všetky [type of equipment = laitteen tyyppimerkintä] a sitä koskevien direktiivin står I överensstämmelse med de väsentliga

Navigation menu