DawnSun Electronic Technology ZhongShan TX001-R1 Remote Control-Transmitter User Manual TX001 R1 R8 TX004 R1 R8 TX00

Download:
Mirror Download [FCC.gov]
Document ID	3156138
Application ID	Ng322yqjGRFFdqkAOeUIIQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.67kB (133332 bits)
Date Submitted	2016-10-05 00:00:00
Date Available	2016-10-08 00:00:00
Creation Date	2016-09-03 19:16:49
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2016-09-29 14:37:11
Document Title	TX001-R1 ~R8、TX004-R1~R8、TX00...
Document Creator	PScript5.dll Version 5.2.2
Document Author:	en08

OPERATION INSTRUCTION
TX001-R1~TX001-R8:
(Optional)
(Optional)
(Optional)
Front
Back
Remote Control Functions:
1.Fan speed control button : To control the ceiling fan speed HIGH , MEDIUM,LOW.
2.FAN/OFF button: ◎Turn off the fan;
◎Press and hold for 5 seconds to enter Light Delay Off mode.
3.LIGHT ON/OFF/DIMMER button : To control light on,off and dimming .
4. Extended Function Switch: 1/0 (Optional).
5. Extended Function Switch: D/CFL (Optional).
6. Extended Function Switch: Learn (Optional).
Note: Install the 12-volt battery to the remote control.
OPERATION INSTRUCTION
TX004-R1~TX004-R8:
(Optional)
(Optional)
(Optional)
Front
Back
Remote Control Functions:
1.Fan speed control button : To control the ceiling fan speed HIGH , MEDIUM,LOW.
2.FAN/OFF button: ◎Turn off the fan;
◎Press and hold for 5 seconds to enter Light Delay Off mode.
3.LIGHT ON/OFF/DIMMER button : To control light on,off and dimming .
4. Extended Function Switch: 1/0 (Optional).
5. Extended Function Switch: D/CFL (Optional).
6. Extended Function Switch: Learn (Optional).
Note: Install the 12-volt battery to the remote control.
OPERATION INSTRUCTION
TX005-R1~TX005-R8:
(Optional)
(Optional)
(Optional)
Front
Back
Remote Control Functions:
1.Fan speed control button : To control the ceiling fan speed HIGH , MEDIUM,LOW.
2.FAN/OFF button: ◎Turn off the fan;
◎Press and hold for 5 seconds to enter Light Delay Off mode.
3.LIGHT ON/OFF/DIMMER button : To control light on,off and dimming .
4. Extended Function Switch: 1/0 (Optional).
5. Extended Function Switch: D/CFL (Optional).
6. Extended Function Switch: Learn (Optional).
Note: Install the 12-volt battery to the remote control.
OPERATION INSTRUCTION
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1)This device may not cause harmful interference .
(2) This device must accept any interference received , including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and use in accordance with
the instructions, may cause harmful interference to radio communications.
However , there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1.Reorient or relocate the receiving antenna.
2.Increase the separation between the equipment and receiver.
3.Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4.Consult the dealer or an experienced radio/TV technician for help.
IC STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre
le fonctionnement.
●Products shall be subject to any changes without additional notices due
to DawnSun will keep innovation and optimization on the products.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : en08
Create Date                     : 2016:09:03 19:16:49+08:00
Modify Date                     : 2016:09:29 14:37:11+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:09:29 14:37:11+08:00
Format                          : application/pdf
Title                           : TX001-R1 ~R8、TX004-R1~R8、TX00...
Creator                         : en08
Document ID                     : uuid:cd1d00f3-b3be-42cd-a7f1-8d28081585f9
Instance ID                     : uuid:be95fb86-4044-4e23-9d63-a7f360e98afc
Page Count                      : 4

EXIF Metadata provided by EXIF.tools