DawnSun Electronic Technology ZhongShan TX003E Fan Remote Controller User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1597573
Application ID	NdDhGpnn0JcmKRPmRb/KSQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.73kB (196677 bits)
Date Submitted	2011-12-07 00:00:00
Date Available	2011-12-07 00:00:00
Creation Date	2011-11-22 17:27:08
Producing Software	Acrobat Distiller 9.4.6 (Windows)
Document Lastmod	2011-11-22 17:27:08
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	lei

OPERATION INSTRUCTION
MODEL:TX003
TX003-R
TX003-E
TX003-ER
Front
TX003-R
TX003
Back
Remote control functions:
1.Fan speed control button : To control the ceiling
fan speed 1 - 6
2.Fan off button：To turn the fan off .
3.Reverse function button : To control fan direction .
4.Light control button : To control light on and off.
5.CODE setting button : With fan power off , arrange
code switch to desired code setting.Turn fan power on.
TX003-E
Back
Remote control functions:
1.Fan speed control button : To control the ceiling
fan speed 1 - 6.
2.Fan off button：To turn the fan off .
3.Reverse function button : To control fan direction .
4.Light control button : To control light on and off.
●Learning Code Pairing: Within 30 seconds after
power on, press and hold Button 2 & 5 at the same
time for 5 seconds. The light will signify pairing is
done . Light will on when it was off, vice versa.
Back
Remote control functions:
1.Fan speed control button : To control the ceiling
fan speed 1 - 6
2.Fan off button：To turn the fan off .
3.Reverse function button : To control fan direction .
4.Light control button : To control light on and off.
5.CODE setting button : With fan power off , arrange
code switch to desired code setting.Turn fan power on.
6.Extended Function Button.
TX003-ER
Back
Remote control functions:
1.Fan speed control button : To control the ceiling
fan speed 1 - 6.
2.Fan off button：To turn the fan off .
3.Reverse function button : To control fan direction .
4.Light control button : To control light on and off.
5.Extended Function Button.
●Learning Code Pairing: Within 30 seconds after
power on, press and hold Button 2 & 5 at the same
time for 5 seconds. The light will signify pairing is
done . Light will on when it was off, vice versa.
Note:Install the 12-volt battery(not included) to the remote control.
OPERATION INSTRUCTION
Note: The receiver(inside the motor)provides the function of multiplicative protection.
1.Lock position: The DC motor has a built-in safety feature against obstruction during
operation. If this occurs, the motor will discontinue operation within 3 seconds of
interruption. To reset, simply disable power supply to the fan motor and re-start.
2.Over 80W protection: When the receiver detects power consumption is greater the 80W,
the receiver power will immediately discontinue. To reset, simply disable power supply
to the fan motor and re-start.
3.Blade setup of motor is arrange according to loading condition; please only install
approved blades from a certified dealer or this may avoid the factory warranty.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1)This device may not cause harmful interference .
(2) This device must accept any interference received , including interference that may
cause undesired operation.
Caution:
2. Changes
Changes
or modifications
or modifications
not expressly
not expressly
approved
approved
by the party
by theresponsible
party responsible
for compliance
for compliance
could void the user's authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and use in accordance with
the instructions, may cause harmful interference to radio communications.
However , there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1.Reorient or relocate the receiving antenna.
2.Increase the separation between the equipment and receiver.
3.Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4.Consult the dealer or an experienced radio/TV technician for help. .
●Products shall be subject to any changes without additional notices due
to DawnSun will keep innovation and optimization on the products.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : lei
Create Date                     : 2011:11:22 17:27:08+08:00
Modify Date                     : 2011:11:22 17:27:08+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 9.4.6 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : <4643432D494432B7A2C9E4C6F7CBB5C3F7CAE92E636472>
Creator                         : lei
Document ID                     : uuid:8dfc98ae-d243-41da-b35b-43e284bea3e3
Instance ID                     : uuid:fcfa99e8-197b-426f-92c6-2402433a5437
Page Count                      : 2

EXIF Metadata provided by EXIF.tools