DawnSun Electronic Technology ZhongShan TX029 Remote Control-Transmitter User Manual

DawnSun Electronic Technology.Co.,Ltd.ZhongShan Remote Control-Transmitter Users Manual

User Manual

1. FAN& LIGHT/OFF Button:Press and release to turn the fan & light on or offPress and hold for 3 seconds to enter theWalk away time delay .2. FAN Speed Button:Turns the the fan on High Medium Low speed and OFF3. LIGHT ON/OFF/DIMMING Button:To control light on, off and dimming.Comfort Breeze Button6. Extended Function Switch L.7. Extended Function Switch R.◎.◎“”// ..4.5. Sleep Timer Button.1. FAN& LIGHT/OFF Button:Press and release to turn the fan & light on or offPress and hold for 3 seconds to enter theWalk away time delay .2. FAN Speed Button:Turns the the fan on High Medium Low speed and OFF3. LIGHT ON/OFF/DIMMING Button:To control light on, off and dimming.4. Comfort Breeze Button5. Sleep Timer Button.6. Extended Function Switch R.7. Extended Function Switch S.◎◎.“”// ..
OPERATION INSTRUCTION●Products shall be subject to any changes without additional notices dueto DawnSun will keep innovation and optimization on the products.FCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1)This device may not cause harmful interferenceThis device must accept any interference received including interference that maycause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment..,(2)NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and use in accordance withthe instructions, may cause harmful interference to radio communications.However there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:1.Reorient or relocate the receiving antenna.2.Increase the separation between the equipment and receiver.3.Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.4.Consult the dealer or an experienced radio/TV technician for help.,This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not causeinterference, and (2) this device must accept any interference, including interferencethat may cause undesired operation of the device.IC STATEMENTLe présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareilsradio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit acceptertout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettrele fonctionnement.

Navigation menu