DawnSun Electronic Technology ZhongShan TX029 Remote Control-Transmitter User Manual
DawnSun Electronic Technology.Co.,Ltd.ZhongShan Remote Control-Transmitter Users Manual
User Manual
1. FAN& LIGHT/OFF Button:
Press and release to turn the fan & light on or off
Press and hold for 3 seconds to enter the
Walk away time delay .
2. FAN Speed Button:
Turns the the fan on High Medium Low speed and OFF
3. LIGHT ON/OFF/DIMMING Button:
To control light on, off and dimming.
Comfort Breeze Button
6. Extended Function Switch L.
7. Extended Function Switch R.
◎.
◎
“”
// .
.4.
5. Sleep Timer Button.
1. FAN& LIGHT/OFF Button:
Press and release to turn the fan & light on or off
Press and hold for 3 seconds to enter the
Walk away time delay .
2. FAN Speed Button:
Turns the the fan on High Medium Low speed and OFF
3. LIGHT ON/OFF/DIMMING Button:
To control light on, off and dimming.
4. Comfort Breeze Button
5. Sleep Timer Button.
6. Extended Function Switch R.
7. Extended Function Switch S.
◎
◎
.
“”
// .
.
OPERATION INSTRUCTION
●Products shall be subject to any changes without additional notices due
to DawnSun will keep innovation and optimization on the products.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1)This device may not cause harmful interference
This device must accept any interference received including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
.
,(2)
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and use in accordance with
the instructions, may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1.Reorient or relocate the receiving antenna.
2.Increase the separation between the equipment and receiver.
3.Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4.Consult the dealer or an experienced radio/TV technician for help.
,
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
IC STATEMENT
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre
le fonctionnement.