Dayton BKM5AB Bike Speed/Cadence Sensor with ANT+/BLE User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2971685
Application ID	pA6d8ShICwDNnussEh9lyg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.57kB (269622 bits)
Date Submitted	2016-04-27 00:00:00
Date Available	2016-04-27 00:00:00
Creation Date	2016-03-28 14:17:10
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2016-03-28 14:17:10
Document Title	Microsoft Word - Standalone speed or cadence transmitter MANUAL.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	lfwong

INSTRUCTION MANUAL
PAIRING AND SENSOR ACTIVATION
Pairing: Consult your Ant + or Bluetooth Smart device’s instructions for pairing. Sensor will
need to be activated directly before pairing process.
Sensor Activation: To verify proper position install as below, spin wheel or turn crank more
than two revolutions. Initial sensor activation will be indicated by the LEDs flashing up to 10
times.
Please Note: The sensor will stay active for at least 20 minutes although the LEDs no longer
flash.
Bluetooth Smart Connection: Install and activate sensor. Turn on your phone’s (or other
compatible device) Bluetooth Smart capability. Open the desired cycling app and follow
instructions for Bluetooth Smart sensor connection.
Please note, Bluetooth Smart devices do not always appear in your phone’s listing, even
when connected.
All apps collect, share, and display speed and cadence information differently.
INSTALLATION
INSTALLATION FOR SPEED SENSOR
INSTALLATION FOR CADENCE SENSOR
SPECIFICATION
Electrical:
1.1 Supply power:
1.2 Battery Life:
1.3 Communication protocol:
Mechanical:
2.1 Water resistance:
2.2 Dimension:
Environmental:
3.1 Operating temperature:
3.2 Storage temperature:
Function:
4.1 Range:
4.2 Indication light:
4.3 Accuracy:
4.4 Transmission range:
4.5 Auto power down:
3.0Vdc (CR2032)
1 years
ANT+ / Bluetooth Smart
IPX7
42mm x 36mm x 16.5mm (main body)
0℃ ~ +60℃
-20℃ ~ +70℃
0.1km/h ~ 99.9km/h(SPEED), 30rpm ~ 240rpm (CADENCE)
White (SPEED), Green (CADENCE)
+/-0.1Km/h or 1% whichever is larger
3 meter (min.)
20 minutes
FCC ID: O4GBKM5AB
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.
The grantee is not responsible for any changes or modifications not expressly approved by the
party responsible for compliance. Such modifications could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
The RF Exposure Compliance distance is 20mm.
IC:7666A-BKM5AB
IC Statement
This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation
of the device.
CAN ICES-3(B)/NMB-3(B)
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) il ne doit pas produire de brouillage et
(2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même
si ce brouillage est susceptible de compromettre le fomctionnement du dispositif.
CAN ICES-3(B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de
RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information
canadienne sur l'exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter. This equipment should be installed and operated with a minimum distance of 20
millimeters between the radiator and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre
antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance
minimum de 20 milliimètres entre le radiateur et votre corps.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 3
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2016:03:28 14:17:10
Modify Date                     : 2016:03:28 14:17:10
Title                           : Microsoft Word - Standalone speed or cadence transmitter MANUAL.doc
Creator                         : PScript5.dll Version 5.2.2
Author                          : lfwong

EXIF Metadata provided by EXIF.tools