Dayton BSCBLE BSCBLE is Bluetooth Low Energy Combo Sensor User Manual

Dayton Industrial Co., Ltd. BSCBLE is Bluetooth Low Energy Combo Sensor

Contents

User Manual

COPYRIGHT 2012 KINETIC BY KURTALL RIGHTS RESERVEDQuick Start GuideKINETIC inRIDE WATT METER AND HEART RATE MONITOR
GROMMETMAGNETHEART RATE STRAPSENSORPress in rubber grommet until seated against lip2Insert rubber grommet into roller hole12Thank you for purchasing the Kinetic inRide Watt Meter and Heart Rate Monitor. If you have any questions, please email us: inride@kurt.comThank You!Scan QR for App conguration and installation instructions and heart rate monitor usage directions or go online to: www.kurtkinetic.com/inride/instructionsAPP USE INSTRUCTIONSWorks with: iPhone 4S & 5, iPad3 & iPad miniINSTALL THE GROMMETWHAT’S IN THE BOX?iPhone and iPad are registered trademarks of Apple, Inc
INSTALL THE MAGNET3Snap magnet to standard screwdriver to rmly hold3Using screwdriver, press magnet into grommet4Magnet should be ush with top of grommet6Press magnet ush with grommet using screwdriver5
SENSOR INSTALLATION GUIDELINESRoller magnet must pass over notch in sensorTRAINER YOKE BRACKETSensor edges must align to edges indicated with red arrows4
INSTALL THE SENSORCarefully position and place sensor on trainer yoke bracket and press into place. NOTE: alignment is critical. Edges of sensor must match edges of trainer yoke bracket.9Clean plastic surface with isopropyl alcoholPeal backing from adhesive patch on sensor785

Navigation menu