Dayton HRMHW1G Fabric Heart rate monitor User Manual en man heart2feel2

Download:
Mirror Download [FCC.gov]
Document ID	1252291
Application ID	9POd3eZR+5vVFh8CnQ2/bg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.17kB (177146 bits)
Date Submitted	2010-03-15 00:00:00
Date Available	2010-09-10 00:00:00
Creation Date	2009-12-10 12:51:27
Producing Software	Adobe PDF library 9.00
Document Lastmod	2010-03-15 16:44:48
Document Title	en-man-heart2feel2
Document Creator	Adobe Illustrator CS4

USING THE
HEART2feel free/X SOFT BELT
The Heart2feel free sensor is using an
analog RF communication, so no need
for any pairing. You can use it like described in the manual of the matching
product (MIXfree & MACRO free)
The Heart2feel X sensor has to be paired like described in the manual for
MIXpro & MACRO X – settings - pairing
1_ Connect the soft belt with the sensor
on one side. Push one bottom of the
heart rate sensor on the strap.
2_ Wet both sensors on the back (rubber area) of the heart rate monitor to
create a strong connection between
your chest and the transmitter
(for extremely dry skin use some
special gel)
3_ Wrap the strap around your chest
and attach it to the other side of the
heart rate monitor.
NOTE: The o-synce logo should be
right-side up.
4_ Bring the o-synce product you want
to use within range (3 m) of the
heart rate monitor.
5_ follow the instruction in user guide to
connect and pair!
NOTE: If or heart rate data does not
appear or if you have erratic heart rate
data, you may have to tighten the strap
on your chest or warm up for 5–10 minutes. If the problem persists, you may
have to pair the sensors.
Reapply moisture to the sensors. Use
water, saliva, or electrode gel. Clean the
sensors. Dirt and sweat residue on the
sensor can interfere with heart rate signals.
Synthetic fabrics that rub or flap against
the heart rate monitor can create static
electricity that interferes with heart rate
signals.
NOTE: In cold conditions, wear appropriate clothing to keep the heart rate
monitor near your body temperature.
Accuracy may be degraded by poor
sensor contact, electrical interference
and receiver distance from transmitter.
Strong electromagnetic fields and some
2.4 GHz wireless sensors can interfere
with your heart rate monitor. Sources of
interference may include very high voltage power lines, electric motors, microwave ovens, 2.4 GHz cordless phones,
and wireless LAN access points. After
you move away from the source of interference, your heart rate data should return to normal.
NOTE: Stay 10 m away from other
ANT sensors while pairing. Bring the
o-synce product within range (3 m) of
the heart rate monitor while pairing. If
the problem persists, replace the battery.
TO REPLACE THE BATTERY
1_ Locate the circular battery cover on
the back of the sensor.
2_ Use a coin to twist the cover couner-clockwise until it is loose enough
to remove.
PE
HEART2feel free/X SOFT BELT
The chest strap must be positioned
around your chest. when correctly
placed, it sends heart rate information to the watch. Located on the
wrist, the watch displays the heart
rate and provides various extra information (target zone, intensity of exercises) to manage and optimize your
fitness and training. The soft belt will
be connected with to clips at the
sensor case. The rubber areas have
to be placed on the skin (see photo
below)
HEART2feel
3_ Remove the cover and replace the
battery with the positive side facing
up.
NOTE: Be careful not to damage or lose
the o-ring gasket on the cover.
4_ Use a coin to twist the coverback
into place.
SWITCHING OFF THE SENSOR
After 3 minutes of inactivity, all sensors
automatically power off to conserve the
battery.
For more information about optional
accessories, go to www.o-synce.com. You
can also contact your o-synce dealer to
purchase accessories.
TECHNICAL FEATURES
Physical size: 65 x 38 x 11 mm
Weight: 25 g
Water Resistance: 10 m
Transmission range:
Approximately 3 m (9.8 ft)
Battery:
User-replaceable CR2032 (3 volts)
Battery Life:
Approximately 3 years (1 hour per day)
CR2032
3V
FCC ID: O4GHRM1G
IC: 7666A-HRM1G
MADE IN CHINA
This device complies with part 15 of the FCC Rules.
Operation is subject to the following conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including
interference
that
may
cause
undesired
operation.
NOTES:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS
COULD
VOID
THE
USER
AUTHORITY
TO
OPERATE
THE
EQUIPMENT.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
corrected.
-- Consult the dealer or experienced radio / TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Adobe PDF library 9.00
Create Date                     : 2009:12:10 12:51:27+02:00
Modify Date                     : 2010:03:15 16:44:48+08:00
Creator Tool                    : Adobe Illustrator CS4
Metadata Date                   : 2010:03:15 16:44:48+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 31273 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : en-man-heart2feel2
Document ID                     : xmp.did:47599FFC80E5DE119B08BA5F047E5609
Instance ID                     : uuid:3ff7299e-2843-42c1-99fe-f1b0ad15a0f0
Original Document ID            : uuid:fbbd06c7-6c0d-11de-b157-003065f91c6e
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:3563983f-5866-4b17-a9f4-66f9b726d8f3
Derived From Document ID        : xmp.did:44599FFC80E5DE119B08BA5F047E5609
Derived From Original Document ID: uuid:fbbd06c7-6c0d-11de-b157-003065f91c6e
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:44599FFC80E5DE119B08BA5F047E5609, xmp.iid:47599FFC80E5DE119B08BA5F047E5609
History When                    : 2009:12:10 12:41:59+01:00, 2009:12:10 12:51:21+01:00
History Software Agent          : Adobe Illustrator CS4, Adobe Illustrator CS4
History Changed                 : /, /
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 180.000038
Max Page Size H                 : 179.999866
Max Page Size Unit              : Millimeters
Font Name                       : Helvetica-Bold, Helvetica
Font Family                     : Helvetica, Helvetica
Font Face                       : Bold, Regular
Font Type                       : TrueType, TrueType
Font Version                    : 3.5a3, 3.5a3
Font Composite                  : False, False
Font File Name                  : Helvetica Bold.ttf, Helvetica.ttf
Plate Names                     : Magenta, Yellow, Black
Swatch Group Name               : Standard-Farbfeldgruppe
Swatch Group Type               : 0
Page Count                      : 2
Creator                         : Adobe Illustrator CS4

EXIF Metadata provided by EXIF.tools