Dayton MW3 BLE Watch User Manual

Dayton Industrial Co., Ltd. BLE Watch

User Manual

EN!
WATCHZ
Product Guide
About WatchZ
Warning
What’s in the box?
Product overview
Compatibility
How does it work?
Install the app
Register online to iMaze Cloud
Set profile from the app
Activate Bluetooth® on phone
Activate Bluetooth® on watch
Watch main features (mode, time, alarm, view, buzzer, light…)
Record a session
Delete all sessions
Record Laps during a session
Sync the watch with the phone
View sessions history in the app
View sessions history and stats online
How to wear the HR strap ?
Connect the HR strap
How to attach the Foot pod ?
Connect the Foot pod
Set heart rate target zone
Watch Speed mode
Watch Stats mode
Watch Lap-Data mode
Phone alert notifications
Evaluate your fitness level
How to replace the battery?
Technical specifications and support
Precautions and safety instructions
Standards and compliance
Warranty limitation
TABLE OF CONTENTS
01
02
03
04
07
09
10
11
12
13
14
15
20
22
23
24
26
27
28
29
31
32
34
36
38
39
40
42
44
45
46
47
49
Thank you for purchasing this iMaze product. When used with the
iMaze Fitness app, WatchZ is a powerful speed and distance multi-
sport watch that syncs with the app to record and analyze your
training history and fitness stats on any smartphone, tablet and
personal computer. Visit us on www.iMazecorp.com and join the
fitness revolution!
Be sure to download our iMaze Fitness app for all smart devices.
ABOUT WATCHZ
01
Read all instructions thoroughly before use.
This product is incompatible with Bluetooth® 2.0 enabled devices (or
previous) such as iPhone® 3/3S/4 and iPad® 1st and 2nd generations.
iPhone®, iPad®, or other Bluetooth® 4.0 enabled smart device is not
included in the box.
This product must be synced to your phone using the free iMaze Fitness
app.
The use of Bluetooth® phone notifications over prolonged periods will
shorten the life of the watch battery.
Before beginning or modifying any exercise program, please consult your
physician and a nutritionist to establish a safe regimen. If you have a
pacemaker or other implanted electronic device, consult your physician
before using a heart rate monitor. The HR strap is intended for recreational
use only and is not intended for medical purposes. Heart rate and other
readings could be influenced by interference from external sources.
The HR strap is not a medical device and can only be used as a health
indicator.
WARNING
02
WHAT’S IN THE BOX?
HR & HRV sensor
Sport watch
User manual
Soft fabric chest strap
Foot pod
03
PRODUCT OVERVIEW
SET/LIGHT (S5)
VIEW (S4) LAP (S3)
START/STOP (S1)
MODE (S2)
Sport watch
1.Battery cover
1
04
3 Lines Display
HR strap
2
1
5
4
5
3
1.Snap buttons/F
2.Battery cover
3.Snap buttons/M
4.Adjustable strap
5.Conductive pads
05
Foot pod
06
1.Battery cover
2.Foot pod clip
3.Light indicator
1
2
3
COMPATIBILITY
Devices
Apps
iMaze Fitness Zenn
On App Store and Google play
!"#
Sensors (optional)
ANT+ bike speed and cadence sensor
ANT+ GPS sensor
!$#
HOW DOES IT WORK?
Sync with phone to set the
time and date then connect
HR stap & foot pod to the
watch. Begin your run
1!
2!
3!
Install iMaze Fitess app,
activate Bluetooth®, and
set personal data from
within the app
Start the chrono feature to
to begin recording. Press
the lap button as needed.
Stop then save the
session.
4!Sync the watch after your
run to upload your session
then review your stats
online
!%#
IMSTALL THE IMAZE APP
Update your phone to the latest software iOS8 or Android 4.3 or
above version.
Download the iMaze Fitness app from iTunes® or App Store®. You
can also find it on our website www.iMazecorp.com.
&!#
REGISTER TO IMAZE CLOUD
Create your new account directly from within the app. Click on
"Register” (1), type your email and password, confirm password,
then validate (2).
Now activate your account by clicking on the link in the confirmation
email. You must use a valid email. Check your inbox.
You can also register directly using your Facebook® account (3).
&&#
1!
2!
3!
SET PROFILE FROM THE APP
Enter your personal data directly from within the app: Name, Age,
Gender, Height, Weight... Then validate (1). Your profile displays
automatically after registration. You can access your personal data
anytime from the app dashboard “My collection” (2). You do not
need to set a profile in the watch.
Welcome to the iMaze community!
All of your sessions and settings will now be recorded in the cloud
and accessible anytime online using the app or a computer. Login
to access your personal dashboard and begin your fitness journey!
&'#
2!
1!
ACTIVATE BLUETOOTH! ON PHONE
()*+,-+#./0-#12/3)#4&56#
70-3#/3#890)+//+2:#;3#<2/3)#=)>3?*@#4'56#
*Do$not$a(empt$to$connect$your$iMaze$watch$on$this$page.!
&A#
890)+//+2# ,BCD,C/3# E,.# F/-G# H;I)-)3+9.# J/-# H;I)-)3+# 12/3)*6# <9),*)#
B/3*09+# ./0-# 12/3)# E,30J,B+0-)-K*# *011/-+# -)*/0-B)*# J/-# H)+,;9)H#
;3*+-0BC/3*#/3#;3*+,99,C/3#,3H#0*)6##
ACTIVATE BLUETOOTH! ON WATCH
Put the watch in TIME mode (1) by pressing on MODE (S2).
Press VIEW (S4) until Bluetooth icon displays (2).
Press and hold VIEW for 2 secs to enable/disable Bluetooth (3).
Bluetooth ON: a “” displays next to Bluetooth
Bluetooth OFF: a “” displays next to Bluetooth
Activate Bluetooth on the watch before you connect to the phone for
training sessions downloading or for phone notifications. Be aware
that excessive use of phone notifications will reduce the battery life.
The Bluetooth switches off automatically after 8 hrs.
&L#
TIME
1!2!3!
MNOP#
<-)**#MNOP#4='5#B/3*)B0CD)9.#+/#B2,3?)#+2)#E/H)6#
Q3#7QMPR#=<PPO#,3H#=P77QST#E/H)*R#<-)**#UV<#4=A5#+/#B2,3?)#*0WXE/H)*6##
WATCH MAIN FEATURES
15
TIME
TRAINING
SPEED
STATS
LAP-DATA
SETTING
TIME
ALARM
SEARCH
USER
LIMITS
UNITS
AUTOLAP
WHEELSIZE
NEWDEV
BLUETOOTH
16
=P7#7QMP#
Q3#7QMP#E/H)R#<-)**#,3H#2/9H#=7V(7Y=7N<#4=&5#J/-#L#*)B*#4&56#72)#*B-))3#
H;*19,.*##=P7#7QMP#03C9#)3+)-;3?#;3+/#CE)#*)>3?#E/H)6#
=)9)B+# 'L# Z-# /-# &'# Z-# E/H)# W.# 1-)**;3?# =P7YUQTZ7# 4=[5# /-# =7V(7Y=7N<#
4=&56#<-)**#UV<#4=A5#+/#D,9;H,+)#4'56#
=)+# Z/0-# 01# /-# H/F3# W.# 1-)**;3?# =7V(7Y=7N<# 4=&5# /-# =P7YUQTZ7# 4=[56#
<-)**#UV<#4=A5#+/#D,9;H,+)#4A56##
=)+#M;30+)R#\),-R#M/3+2R#O,.#0*;3?#+2)#*,E)#E)+2/H6#
TIME
1!2!3!
24HR 18:39
HOUR
SET
TIME
0:00
17
=P7#VUV(M#
Q3#7QMP#E/H)R#<-)**#UV<#4=A5#+/#H;*19,.#V9,-E#E/H)#4&56##
Q3# VUV(M# E/H)R# <-)**# ,3H# 2/9H# =7V(7Y=7N<# 4=&5# J/-# [# *)B*#4'56#72)#
*B-))3#H;*19,.*##=P7#VUV(M#03C9#)3+)-;3?#;3+/#V9,-E#*)>3?#E/H)6#
=F;+B2#NSYN]]#+2)#V9,-E#W.#1-)**;3?#=P7YUQTZ7#4=[5#/-#=7V(7Y=7N<#4=&56#
<-)**#UV<#4=A5#+/#D,9;H,+)#4A56#
=)+#2/0-#01#/-#H/F3#W.#1-)**;3?#=7V(7Y=7N<#4&5#/-#=P7YUQTZ7#4=[56#<-)**#
UV<#4=A5#+/#D,9;H,+)#4L56#=)+#M;30+)R#0*;3?#+2)#*,E)#E)+2/H6#
ALARM
1!3!
4!
0n
07:00
HOUR
ALARM
ALARM
2!
SET
18
^QP_#
Q3#7QMP#Y#7(VQSQST#Y#=<PPO#E/H)*R#<-)**#^QP_#4=L5#+/#B.B9)#H,+,#/3#+2)#
A-H#H;*19,.#9;3)6##
19:10:35
SAT 25.10
O,+)#
VD)-,?)#Z),-+#(,+)#4W1E5#
7/+,9#7-,;3;3?#CE)#4!!`!!5#
a0--)3+#U,1#CE)#4!!`!!5##
a0--)3+#=1))H#4bEY2#cE;Y2d#/-#E;3Y
GE#cE;3YE;d5#
a0--)3+#W;G)#B,H)3B)#4(<M5#;J#
1,;-)H#F;+2#8;G)#=ea#*)3*/-#
/-##
a0--)3+#<,B)#4=<M5#;J#1,;-)H#F;+2#
J//+#1/H#
VD)-,?)#=1))H#4bEY2#cE;Y2d#/-#
E;3YGE#cE;3YE;d5#
O;*+,3B)#4bE#/-#E;5#
890)+//+2#*+,+0*#4NSYN]]5#
19
8fggP(#
Q3#,3.#E/H)R#<-)**#,3H#2/9H#=P7YUQTZ7#4=[5#J/-#A#*)B*#+/#)3,W9)#Y#H;*,W9)#
+2)#W0hh)-6#
Buzzer ON: 2 beeps sound
Buzzer OFF: 1 long beep sound
LIGHT
Q3# ,3.# E/H)# 4)iB)1+# ;3# =)>3?# E/H)5R# 1-)**# =P7YUQTZ7# 4=[5# +/# +0-3# NS#
+2)#*B-))3#W,BG9;?2+6#Q+#9,*+*#J/-#[#*)B*6#
RECORD A SESSION
Put the watch in TRAINING mode (1) by pressing on MODE (S2).
Press START/STOP (S1) to start/stop recording of the session (2). The
stopwatch starts. It displays the training time in real time and indicates the
stopwatch status on the 3rd display line :
Start - Ready to start the session.
Run - The stopwatch is running. The watch is recording
Lap – Recording a Lap.
Stop - The stopwatch has stopped
During a session, put the watch in STATS mode to review your training
statistics. See page 37. Note that once the session has been saved, that
session’s STATS are no longer viewable on the watch.
After training (stopwatch stopped), press and hold START/STOP (S1) for
4 secs to save the recorded session (3).
20
TRAINING
1!2!
00:00:00
Start
3!
Hold
SAVE
21
In TRAINING mode, the main information displayed are stopwatch (4) and
heart rate (5), if the HR strap is connected.
If the Foot pod is connected, pace and distance will be also displayed on
the 3rd display line (6). Press VIEW (S4), to cycle other information. See
section page 18.
4!
00:12:35
5!
68
6!
PACE 86
DELETE ALL SESSIONS
22
1!
dEL
MEMORY
In TRAINING mode, press and hold LAP (S3) for 4 secs to delete the
watch memory and erase all saved sessions (1).#
RECORD LAPS DURING A SESSION
During a session in TRAINING mode when the stopwatch is running,
press LAP (S3) to record laps (3). You can record up to 50 laps.
23
TRAINING
1!2!3!
00:00:00 00:10:51
LAP 1
PRESS LAP 1
START PRESS LAP 2 STOP 3
When recording a lap, the lap duration (RUN 1 RUN 50) and lap
number (LAP 1 LAP 49) are displayed for 5 secs, then the display
returns to total time duration since the stopwatch started.
RUN RUN 2 RUN 3
RUN 2
RUN
SYNC THE WATCH WITH THE PHONE
Enable Bluetooth on both Phone and Watch. See pages 13-14.
Tap on WatchZ (1) in Add on’s to install WatchZ features to the app.
In My collection, tap on WatchZ (2) to launch the watch dashboard.
Make sure the watch is within the proximity range and tap on Start
(3).
The phone looks for a nearby Watchz. When found, a pop-up
displays the session details. Select the activity (4) then confirm (5).
If several sessions have been recorded in the watch, a new pop-up
will appear for each session. Repeat the method.
When all the sessions are downloaded, the watch memory is
erased. The sessions are automatically synced and saved with the
iMaze Cloud.
Tap Home to quit then History to access the sessions (6). See pages
25-26.
24
25
4!
5!
3!
6!
1!
2!
VIEW SESSIONS HISTORY IN THE APP
In My collection, the home page of the app, tap on History (1).
All your sessions are displayed by Week or Month (2). Tap on
desired list.
Tap on a session to see all detailed information (3). Each session
report contains 5 sections: Summary, Graphs, Map, Weather and
Comments.
1!2!
3!
26
VIEW SESSIONS HISTORY AND STATS ONLINE
You must register and connect to the iMaze cloud to review all your
sessions and stats online.
LOGIN at community.imazecorp.com with your email and password
to access your personal dashboard.
If you didn’t create your iMaze account yet, Click on CREATE then
follow the 4 quick steps online.
27
HOW TO WEAR THE HR STRAP ?
Attach the HR strap to your chest as following:
(1) Snap the Dual HR sensor into one end of the fabric strap.
(2) Adjust the fabric strap length to fit your chest.
(3) Wrap it around your back, keeping the Dual HR sensor facing up on
your chest and the conductive pads in contact with your skin.
(4) Snap the other end of the strap into place.
Before wearing, moisten both conductive pads of the strap with
water. Make sure that the strap is comfortably but snugly attached around
your chest.
28
CONNECT THE HR STRAP
When the 2 conductive pads are properly moistened and positioned on
your chest, the HR strap automatically detects, measures, and wirelessly
transmits your heart rate (beats per minute) in real time to the watch.
Before using, the HR strap must be paired with the watch. This is only
necessary when you connect the HR strap for the first time.
<VQ(QST#7ZP#Z(#=7(V<#
In SETTING mode, Press LAP (S3) to display PAIR NEWDEV (1). Then
press START/STOP (S1) to search for devices nearby. The Heart icon
appears and is flashing during search.
When the Dual HR strap is detected, the screen displays PR SPD DEV
(3). Confirm pairing by pressing START/STOP (S1). It displays SPD OK
when the foot pod is paired. Press MODE (S2) to exit.
1!2!
PAIR
NEWDEV
PR
SEARCH…
3!
HR-BELT
PR
HR OK
29
aNSSPa7#7ZP#Z(#=7(V<#
Once paired, the HR strap is automatically connected to the watch when
entering into TRAINING or SPEED modes (1). The Heart icon blinks then
displays when the device is connected.
If the HR strap doesn’t connect:
1) Make sure to moisture the conductive pads before wearing the strap
snugly around your chest.
2) Keep the HR strap in within the proximity range.
3) Launch device searching manually by pressing LAP (S3). The Heart
icon will flash during search (2).
TRAINING
1!
SPEED
2!
30
Attach the foot pod to the laces of your running shoes as follows:
(1) Remove the fitt pod from the clip
(2) Attach the clip by sliding it under the laces
(3) Tighten the laces
(4) Attach the foot pod to the clip
To ensure accurate measurement, make sure the device is well aligned
with the shoe and tightly secured (can not move around).
HOW TO ATTACH THE FOOT POD ?
31
CONNECT THE FOOT POD
The Foot pod automatically detects, measures, and wirelessly transmits
your speed and distance in real time to the watch. The foot pod reacts to
motion. To turn it on, shake it several times until the red light blinks 3
times. Turn it on before connecting / pairing.
Before using, the Foot pod must be paired with the watch. This is only
necessary when you connect the foot pod for the first time.
<VQ(QST#7ZP#]NN7#<NO#
In SETTING mode, Press LAP (S3) to display PAIR NEWDEV (1). Then
press START/STOP (S1) to search for devices around. The foot pod icon
appears and is flashing during search.
When the Foot pod is detected, the screen displays PR SPD DEV (3).
Confirm pairing by pressing START/STOP (S1). It displays SPD OK when
the foot pod is paired. Press MODE (S2) to exit.
1!2!
PAIR
NEWDEV
PR
SEARCH…
3!
SPD DEV
PR
SPD OK
32
aNSSPa7#7ZP#]NN7#<NO#
Once paired, the foot pod is automatically connected to the watch when
entering in TRAINING or SPEED modes (1). The foot pod icon blinks then
displays when the device is connected.
If the foot pod doesn’t connect:
1) Make sure that you turned it on. The Light indicator must flash 3 times.
2) Keep the foot pod within the proximity range.
3) Launch device searching manually by pressing LAP (S3). The foot pod
icon will flash during search (2).
TRAINING
1!
SPEED
2!
33
SET HEART RATE TARGET ZONE
Set the training HR zone directly from within the app.
Make sure that your profile is correctly set. See section page 12.
In My collection, the home page of the app, tap on Settings (1). Access
Heart Rate Target Zone by taping on Heart Rate Alarm (2). You can also
access Heart Rate setting from the activity dashboard menu.
Set your maximum heart rate HRMax (3). It’s set at 220 bpm minus your
age as default. Example: I set my age as 39 in Personal data, my HRMax
is 181 bpm (220 – 39)
Select your training zone (4): Health, Fitness, Aerobic, Anaerobic,
Maximum. The maximum and minimum thresholds HR Zone Max and HR
Zone Min adjust automatically according to the zone (5)
Tap Home to quit (6)
The next time that you sync the watch, the app will automatically set the
parameters of the watch.
34
1!
2!
3!
4!
6!
5!
7!8!
LIMITS
126
Lo LIMIT
9!
HI LIMIT
144
In the watch, go to SETTING mode then press LAP (S3) to display LIMITS
(7). Press START/STOP (S1) to display HR Zone Min [LO LIMIT] (8).
Press LAP (S3) to HR Zone Max [HI LIMIT] (9).
35
WATCH SPEED MODE
36
Put the watch in SPEED mode (1) by pressing on MODE (S2).
The SPEED mode displays data without recording. It displays Speed and
Heart rate (2). Cycle other information by pressing VIEW (S4) - see page
18.
Connect paired sensors by pressing LAP (S3). The display indicated
SEARCH… and icons of paired devices flashes (3). Once the sensors
links, the related icon fix on and the display comes back to SPEED mode
(2).
1!2!
68
3!
PACE 106
9.5
Km/h
SEARCH…
SPEED
37
Push and hold LAP (S3) for 4 secs to SET SPEED mode (1).
Press START/STOP (S1) to switch speed unit from km/h cE;Y2d#to min/km
cE;3YE;d#and vise versa (2).
Press LAP (S3) to return SPEED mode (3).
1!2!
Km/h
SPEED
SET
SPEED
3!
68
PACE 96
6.6
min/km
STATS
WATCH STATS MODE
Put the watch in STATS mode (1) by pressing on MODE (S2).
<-)**#UV<#4=A5#+/#B.B9)#H;I)-)3+#*+,+*#/J#+2)#9,+)*+#-)B/-H)H#/-#B0--)3+#*)**;/36##
38
VD)-,?)#Z),-+#(,+)#4W1E5#
Z),-+#(,+)#M,i#4W1E5#
7;E)#;3#g/3)#4E;35#
7;E)#;3#9/F)-#h/3)#4E;35#
7;E)#;3#2;?2)-#h/3)#4E;35#
7/+,9#a,9/-;)*#W0-3)H#4bB,95#
7/+,9#],+#W0-3)H#4?5#
890)+//+2#*+,+0*#4NSYN]]5#
WATCH LAP-DATA MODE
39
LAP-DATA
Put the watch in LAP-DATA mode (1) by pressing on MODE (S2).
<-)**# UV<# 4=A5# +/# B.B9)# 9,1# H,+,# /J# +2)# 9,+)*+# -)B/-H)H# /-# B0--)3+# *)**;/36# ]/-#
),B2#U,1R#+2)#F,+B2#H;*19,.*`#9,1#CE)R#,D)-,?)#2),-+#-,+)#+2)3#,D)-,?)#*1))H6#
"#$%&'()
U,1#7;E)##U&#
VD)-,?)#Z),-+#(,+)#U&#4W1E5#
VD)-,?)#=1))H#U&#4bEY2#cE;Y2d#/-#
E;3YGE#cE;3YE;d5#
"#$)*)+,-.)*/)
U,1#7;E)##U&#
VD)-,?)#Z),-+#(,+)#U&#
VD)-,?)#=1))H#U'#
"#$)0)+,-.)0/)
U,1#7;E)##US#
VD)-,?)#Z),-+#(,+)#US#
VD)-,?)#=1))H#US#
PHONE ALERT NOTIFICATIONS
Enable Bluetooth on both Phone and Watch. See pages 13-14.
Make sure the watch is within the proximity range. In My collection, tap on
WatchZ (1) to launch the watch dashboard.
Confirm notification access for WatchZ (2).
In phone notification access, select iMaze Fitness (3) and enable iMaze
Fitness to access phone notifications (4).
Tap on Menu to display Alert notifications (5).
Enable / Disable the phone notifications: Calls, sms, messages (6).
You must synch the watch with the phone at least one time. Tap on Start
(7). See page 24-25. You have now both phone and watch associated for
alert notifications.
40
41
5!
1!
6!
2!
3!
4!
7!
EVALUATE YOUR FITNESS LEVEL
The Dual HR strap features our new health wellness monitor giving you
an indication of your daily level of stress and fatigue base on Heart Rate
Variability*. With a simple one minute assessment each morning during
rest, the Zenn in-app feature will track your daily Zenn score scaled from
0-100. The higher your Zenn is the better you are! Looking at your daily
and weekly Zenn index evolutions, you can then adjust your training load
to optimize results. To measure your Zenn index:
Put on the HR strap. See section page 27.
Enable Bluetooth on both Phone and Watch. See pages 13-14.
Tap on Zenn in Add on’s to install Zenn features to the app (1).
In My collection, tap on Zenn (2) to launch the app.
Sit down in a resting position then tap on Play to start assessment (3).
The app looks for nearby HR strap and connects (4). The 1 min timer
starts counting down.
Once the measurement is done, it displays your Zenn index as well as
your Average Heart rate (5). Tap on History (6) to see trends.
Tap Home to quit (7).
*It's not a medical device and can only be used as overall indicator of health. Accurate and proven method of rMSSD
42
43
2!
1!
3!
4!
5!
6!
7!
HOW TO REPLACE THE BATTERY ?
Use a coin to unscrew the battery cover counterclockwise to open the
battery compartment at the back of the watch.
Remove and replace the old battery with a CR2032 type e-cell by
inserting as indicated by the polarity markings (+/-).
Put the battery cover back in place and turn clockwise till the cover is
secured. Make sure the 0-ring is in the correct position.
Watch
Sensors
Use the same method but only ¼ turning the battery cover is necessary.
We advise you to contact an authorized facility to change the battery. By
changing the battery yourself, you risk damaging the 0-ring and
compromising the water resistance of the product thereby voiding the
product warranty.
44
TECHNICAL SPECIFICATIONS AND SUPPORT
Certified Bluetooth® 4.0 and ANT+TM
5 to 8 Hrs of workout recording
Heart Rate range from 30 to 240 bpm
Heart Rate Variability (R-R intervals)
Speed from 3.6 km/h to 19.8 km/h (3 ft/s to 16.5 ft/s)
Sync with iMaze Fitness app
Transmission range up to 3m (~10 feet) in open areas
Firmware Upgrade Over The Air
Replaceable battery - CR2032 lithium battery
Battery life during normal use: > 1 year
Water resistance: 30 m / 100 ft.
Operating temperature: 0°C ~ 50°C
Storage temperature: 20°C ~ 60°C
Weight: total ~129g (~4.55oz): ~ 64g (unit) + ~65g (sensors)
If you have any questions, please contact us at: support.imazecorp.com
You can also consult troubleshooting and FAQ guides on our website.
Specifications
Support
45
PRECAUTIONS AND SAFETY INSTRUCTIONS
Do not dismantle the product or attempt maintenance yourself.
This product contains an e-cell battery; do not dispose of the product into
household trash. Instead, store it separately and contact your local dealer
for disposal.
Do not throw the product into fire.
This product is not intended for use by young children or infirm persons
without supervision.
46
STANDARDS AND COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class
C digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the
instructions may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Please Note: Any change or modification, which has not been expressly
authorized by iMaze is liable to invalidate the authorization granted to the user
for the use of the equipment.
FCC regulation
47
Product name: WatchZ
Is herewith confirmed to comply with the requirements set out in the
Council (European parliament) Directive on the Approximation of the Laws
of the Member States relating to Electromagnetic Compatibility of Radio
and Telecom device (1999/5/EC). For the evaluation regarding this
Directive, the following standards were applied:
EN 300 440-1 V1.6.1:2010
EN 300 440-2 V1.4.1:2010
EN 301 489-1 V1.8.1:2008
EN 301 489-3 V1.4.1:2002
EN 62479:2010
EN 60950-1/A12:2011
EN 300 328 V 1.8.1:2012
EN 301 489-17 V 2.2.1:2012
CE declaration of conformity
48
iMaze guarantees the initial purchaser that this product is free from
defects of materials or manufacture for a period of two years from the date
of purchase. Please keep your receipt as proof of purchase.
This warranty does not cover damage resulting from misuse, from a
failure to respect the precautions for use, from accidents, from improper
maintenance, from commercial use or from use of non-approved software
applications.
This warranty does not cover loss (device and data) resulting from
malfunction or misuse of the product.
This warranty does not cover damage resulting from repairs carried out by
persons not authorized by iMaze.
The warranty does not cover batteries or cracked or broken casings
where signs of a blow are evident.
All photos and pictures representing our products on packaging are not
contractual.
WARRANTY LIMITATION
49
© 2014 iMaze. All rights reserved. All trade and brand names are
registered trademarks of their respective manufacturers registered in the
U.Ss and in other countries. The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc.
ref. product: ZSPWATCH-DUAL/001
ref. pack: imaze30-PGSI001-EN
www.imazecorp.com

Navigation menu