Deere and ISG Electronic Systems JDSTG-PSA01 AccuSpeed Doppler Effect Speed Sensor User Manual Accuspeed Installation Instructions

Download:
Mirror Download [FCC.gov]
Document ID	136617
Application ID	/07aLjds01qQV+pLMjvNAg==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	61.8kB (772550 bits)
Date Submitted	2001-02-15 00:00:00
Date Available	2001-02-15 00:00:00
Creation Date	2001-02-13 11:46:38
Producing Software	Acrobat PDFWriter 4.0 for Windows
Document Lastmod	2001-02-13 11:16:39
Document Title	Accuspeed Installation Instructions
Document Creator	Microsoft Word - Accuspeed Installation Instructions.doc

Accuspeed Installation Instructions:
FCC Warning:
Changes or modifications not expressly approved by Phoenix International could void the user's authority to operate the equipment.
Installation:
The Accuspeed ground speed sensor is designed as an OEM ground speed sensor, and is to be mounted from 45 cm to 90 cm vertical
height above the ground and at 35 degrees from horizontal. The sensor is designed to face the rear of the vehicle.
When designing a mounting bracket, avoid having metal extend beyond the mounting feet of the sensor anywhere around the
circumference of the radome, which is the integrated antenna for this device.
The sensor can be mounted directly onto the tractor without need for rubber mounting feet.
Avoid having any moving parts (i.e. tires, treads, 3-point hitch, etc) in the line of sight of the sensor.
AccuSpeed
Doppler Effect Speed Sensor
PHOENIX
INTERNATIONAL
While this signal is useful for driver
information displays, it also enables closedloop control systems, such as variable rate
application techniques, and intelligent vehicle
driveline management. A reliable true ground
speed signal will also support emerging
autonomous vehicle concepts.
AccuSpeed Doppler Effect Speed Sensor
The Phoenix International AccuSpeed Doppler
Effect Speed Sensor uses a concentrated
millimeterwave radar signal and the proven
Doppler shift principle to accurately measure
true ground speed of vehicles that operate in
adverse environmental conditions.
The AccuSpeed sensor combines in its
ruggedized plastic enclosure and a unique
radar front end design with highly integrated
digital signal processing (DSP) electronics.
Output signal and installation details are
backward-compatible with older speed sensor
products. With its small size and low cost,
AccuSpeed meets the requirements of OEM
customers and retrofit markets.
AccuSpeed’s industry-standard output
provides a continuous and robust true ground
speed signal whenever the vehicle is moving.
The sensor is typically installed at a height of
0.6 m but can be installed up to 1.2 m above
the ground or above the top of the crop. The
sensor should be mounted facing rearward
and positioned so that it has a clear view of
the ground.
The AccuSpeed sensor has passed the full
spectrum of tests specified in the ASAE EP455 Standard for electronics on mobile
equipment including temperature, vibration,
moisture, dust, electrical, and the
electromagnetic compatibility (EMC) tests.
The unit also meets the requirements of the
R&TTE Directive and is CE compliant.
AccuSpeed Speed Sensor Product Specifications
Velocity Range
0.19 to 39.8 mph
Accuracy
< ± 3% 0.19-1.9 mph
< ± 1% 1.9-39.8 mph
Mounting Angle
35° depressed below horizontal,
rearward-facing (preferred) or
forward-facing
Step Response ≤ 200 milliseconds delay
Mounting Height
0.3 to 1.2 m above the ground or
above the top of the crop, typical
mounting height 0.6 m
Microwave
Frequency
Mounting
Fasteners
To Be Determined
Overall Dimen.
10.2 cm x 10.2 cm x 9.1 cm
Weight
0.45 kg
Connector
CPC: DELPH*12015024
Pin 1 Ground
Pin 2 Speed Signal Output
Pin 3 +12V DC (nominal 12V
vehicle supply) 15 inches or 0.37
meter cable length
Electrical
Protection
Start/Stop Delay ≤ 25 cm
Microwave
Power
100 mW (EIRP)
Environmental
• ASAE EP-455: includes
standards for reverse
polarity, electrical transients
(such as load dump,
inductive load switching),
chemical corrosion, dust, salt
spray, rain, wash,
mechanical shock, and
vibration
150 mA @ 12 V DC
+9 to 16V DC input voltage range
Electro-Magnetic
Compatibility
• CE
• CSA
• FCC
Output Frequency 57.42 Hz/mph (128 pulses/meter)
@ 45° mounting angle
Other frequencies are available by
custom order.
Square Wave
Output
24.125 GHz (standard)
24.300 GHz (UK)
Tolerance ± 25 MHz
Regulatory
Compliance
(European version pictured above with an
AMP*206429-1 connector and a cable
length of 57.1”inches or 1.45 meters)
Electrical Supply
Signal to ground & signal to
power supply protection
Electrical transient protection per
ASAE EP-455 Standard
Z OH ≈ 1000 ohms
Z OL ≤ 100 ohms
V OH ≈ +V (battery)-1.0V
V OL ≤ 1.0 V at 15 mA
I out (max.) = 22 mA
Storage
Temperature
-40C to +85C
Specifications and design subject to change without notice.
PHOENIX INTERNATIONAL CORPORATION
Fargo, ND u Springfield, IL
Phone: 701-282-9364 u Fax: 701-282-9365 u www.phoeintl.com
100005GU
Printed in USA

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : Microsoft Word - Accuspeed Installation Instructions.doc
Create Date                     : 2001:02:13 11:46:38
Title                           : Accuspeed Installation Instructions
Producer                        : Acrobat PDFWriter 4.0 for Windows
Modify Date                     : 2001:02:13 11:16:39-08:00
Page Count                      : 4

EXIF Metadata provided by EXIF.tools