Dell Chassis Management Controller Version 2 1 Users Manual 2.1 User's Guide
2014-11-13
: Dell Dell-Chassis-Management-Controller-Version-2-1-Users-Manual-118081 dell-chassis-management-controller-version-2-1-users-manual-118081 dell pdf
Open the PDF directly: View PDF
Page Count: 378 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Dell™ Chassis Management Controller Firmware Version 2.10 User Guide
- Overview
- Installing and Setting Up the CMC
- Before You Begin
- Installing the CMC Hardware
- Installing Remote Access Software on a Management Station
- Configuring a Web Browser
- Setting Up Initial Access to the CMC
- Accessing the CMC Through a Network
- Installing or Updating the CMC Firmware
- Configuring CMC Properties
- Understanding the Redundant CMC Environment
- Configuring CMC to Use Command Line Consoles
- Using the RACADM Command Line Interface
- Using a Serial, Telnet, or SSH Console
- Using RACADM
- Using RACADM to Configure the CMC
- Configuring CMC IPv4 Network Properties
- Using RACADM to Configure Users
- Using RACADM to Configure Public Key Authentication over SSH
- Configuring SNMP and E-mail Alerting
- Configuring Multiple CMCs in Multiple Chassis
- Using RACADM to Configure Properties on iDRAC
- Troubleshooting
- Using the CMC Web Interface
- Accessing the CMC Web Interface
- Configuring Basic CMC Settings
- Monitoring System Health Status
- Viewing Chassis and Component Summaries
- Viewing Chassis Graphics and Component Health Status
- Viewing Power Budget Status
- Viewing Server Model Name and Service Tag
- Viewing the Health Status of All Servers
- Editing Slot Names
- Setting the First Boot Device for Servers
- Viewing the Health Status of an Individual Server
- Viewing the Health Status of IOMs
- Viewing the Health Status of the Fans
- Viewing the iKVM Status
- Viewing the Health Status of the PSUs
- Viewing Status of the Temperature Sensors
- Viewing World Wide Name/Media Access Control (WWN/MAC) IDs
- Configuring CMC Network Properties
- Configuring VLAN
- Adding and Configuring CMC Users
- Configuring and Managing Microsoft Active Directory Certificates
- Securing CMC Communications Using SSL and Digital Certificates
- Managing Sessions
- Configuring Services
- Configuring Power Budgeting
- Managing Firmware Updates
- Managing iDRAC
- FlexAddress
- Remote File Sharing
- Frequently Asked Questions
- Troubleshooting the CMC
- Using FlexAddress
- Using the CMC With Microsoft Active Directory
- Active Directory Schema Extensions
- Extended Schema Overview
- Active Directory Schema Extensions
- Overview of the RAC Schema Extensions
- Active Directory Object Overview
- Configuring Extended Schema Active Directory to Access Your CMC
- Extending the Active Directory Schema
- Installing the Dell Extension to the Active Directory Users and Computers Snap-In
- Adding CMC Users and Privileges to Active Directory
- Configuring the CMC With Extended Schema Active Directory and the Web Interface
- Configuring the CMC With Extended Schema Active Directory and RACADM
- Standard Schema Active Directory Overview
- Frequently Asked Questions
- Configuring Single Sign-On
- System Requirements
- Configuring Settings
- Configuring Smart Card Two-Factor Authentication
- Power Management
- Overview
- Redundancy Policies
- Configuring and Managing Power
- Viewing the Health Status of the PSUs
- Viewing Power Consumption Status
- Viewing Power Budget Status
- Configuring Power Budget and Redundancy
- Assigning Priority Levels to Servers
- Setting the Power Budget
- Server Power Reduction to Maintain Power Budget
- Executing Power Control Operations on the Chassis
- Executing Power Control Operations on an IOM
- Executing Power Control Operations on a Server
- Troubleshooting
- Using the iKVM Module
- I/O Fabric Management
- Troubleshooting and Recovery
- Overview
- Chassis Monitoring Tools
- First Steps to Troubleshooting a Remote System
- Monitoring Power and Executing Power Control Commands on the Chassis
- Power Supply Troubleshooting
- Viewing Chassis Summaries
- Viewing Chassis and Component Health Status
- Viewing the Event Logs
- Using the Diagnostic Console
- Resetting Components
- Troubleshooting Network Time Protocol (NTP) Errors
- Interpreting LED Colors and Blinking Patterns
- Troubleshooting a Non-responsive CMC
- Troubleshooting Network Problems
- Disabling a Forgotten Password
- Troubleshooting Alerting
- Glossary
- Index