Dell Powered Usb Hub Setup Diagram

: Dell Dell-Powered-Usb-Hub-Setup-Diagram-111484 dell-powered-usb-hub-setup-diagram-111484 dell pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Setting Up Your Powered USB Hub
CAUTION:

Before you set up and operate your Dell hub, see the
safety instructions in the Product Information Guide
TM

This placemat is only intended for quick reference.
Consult your Product Information Guide for complete details
(a)
1

2

3

4

(b)

1 Unpack your Powered USB Hub

1

2

If Integrator is used, remove cover from Integrator (a)
and slide tray out (b)

4

Connect AC power cord to hub and power outlet

1. Port LEDs (6)
2. Status LED
3. Host LED
4. Service Tag Label
1

2

(a)
4
5

3

(b)
6

1. USB Peripheral Ports (+12 V) (5)
2. USB Peripheral Port (+24 V)
3. USB Host Port
4. Power Switch
5. AC Power Port
6. AC Pass-Through Power Ports (2)

*0TF663A00*
0TF663A00

www.dell.com

3

If Integrator is used, install retainers (a) and hub (b)
NOTE: If Integrator is not used, place hub in secured
position

| support.dell.com

1 - Dell Host PC and Integrator sold separately

Continued

5

Connect one AC pass-through power cord to hub and
Host PC. Connect other AC pass-through power cord
to hub and monitor.
NOTE: Do not connect AC pass-through connectors
to other devices without checking the Product
Information Guide

6

Connect USB cable to hub and Host PC

7

2

Connect peripheral cables to peripherals and then
hub when hot-plugging. NOTE: This order must be
observed or damage may result to peripherals
and/or hub

(b)

(Windows XP)

(a)
(Windows 2000)

8

Turn power switch on. Ensure green "Status" LED
is illuminated

9

Allow Windows to install drivers for devices. Ensure
green "Host" and green "Port" LEDs are illuminated.
Amber "Port" LEDs indicate over-current

Information in this document is subject to change without notice.
© 2006 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell is strictly forbidden.
Dell and the DELL logo are trademarks of Dell Inc. Dell disclaims proprietary interest in the marks and names of others.
February 2006

2 - Cables not included. Peripherals sold separately.

10

If Integrator is used, slide Integrator tray in (a) and
replace cover (b)

Waste Electrical and Electronic Equipment (WEEE) Directive
In the European Union, this label indicates that this product should
not be disposed of with household waste. It should be deposited at an
appropriate facility to enable recovery and recycling.
For information on how to recycle this product responsibly in your
country, please visit: www.euro.dell.com/recycling.

Printed in China