Dell Compellent Fs8600 FluidFS 5.0 Appliance CLI Reference Guide User Manual Fluid FS En Us

User Manual: Dell dell-compellent-fs8600 - Dell FluidFS 5.0 FS8600 Appliance CLI Reference Guide

Open the PDF directly: View PDF .
Page Count: 304

Download
Open PDF In Browser	View PDF

Dell FluidFS 5.0 FS8600 Appliance
CLI Reference Guide

Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you
how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Copyright © 2016 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and
intellectual property laws. Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or other
jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies.
2016 - 07
Rev. C

Contents
About This Guide....................................................................................................15
Revision History................................................................................................................................... 15
Audience.............................................................................................................................................. 15
Related Documentation...................................................................................................................... 15

1 About the CLI....................................................................................................... 17
CLI Menus............................................................................................................................................ 17
CLI Command Syntax......................................................................................................................... 20
Navigating the CLI...............................................................................................................................20
Entering Commands in the CLI ......................................................................................................... 20
Enter a Command by Navigating One Menu at a Time .............................................................. 21
Enter a Single Line Command ......................................................................................................21
CLI Output .......................................................................................................................................... 21
Getting Help on the CLI ..................................................................................................................... 22
Accessing the CLI ...............................................................................................................................22
Connect to the FluidFS Cluster CLI Using a VGA Console .........................................................22
Connect to the FluidFS Cluster CLI Through SSH Using a Password ........................................ 22
Connect to the FluidFS Cluster CLI Through SSH Without Using a Password .......................... 23

2 CLI Commands....................................................................................................24
access-control active-directory join..................................................................................................24
access-control active-directory leave............................................................................................... 25
access-control active-directory modify-settings..............................................................................25
access-control active-directory status.............................................................................................. 25
access-control available-backups list................................................................................................26
access-control computers-list...........................................................................................................26
access-control domains-list............................................................................................................... 27
access-control groups-list................................................................................................................. 28
access-control local-groups add.......................................................................................................29
access-control local-groups add-external-computer..................................................................... 30
access-control local-groups add-external-group............................................................................30
access-control local-groups add-external-user............................................................................... 31
access-control local-groups add-local-user.................................................................................... 32
access-control local-groups delete...................................................................................................32
access-control local-groups delete-external-computer................................................................. 32
access-control local-groups delete-external-group........................................................................33
access-control local-groups delete-external-user...........................................................................34
access-control local-groups delete-local-user................................................................................ 34
access-control local-groups list.........................................................................................................35
3

access-control local-groups restore................................................................................................. 36
access-control local-groups view..................................................................................................... 36
access-control local-users add.......................................................................................................... 37
access-control local-users change-password..................................................................................38
access-control local-users delete......................................................................................................39
access-control local-users edit..........................................................................................................39
access-control local-users list........................................................................................................... 40
access-control local-users restore.................................................................................................... 41
access-control local-users view.........................................................................................................41
access-control local-users view-groups...........................................................................................42
access-control local-users without-password-complexity-checks add-user................................42
access-control local-users without-password-complexity-checks change-password.................43
access-control mapping manual add................................................................................................ 44
access-control mapping manual delete............................................................................................44
access-control mapping manual edit................................................................................................ 45
access-control mapping manual list..................................................................................................46
access-control mapping manual restore.......................................................................................... 46
access-control mapping manual view............................................................................................... 47
access-control mapping policy edit.................................................................................................. 48
access-control mapping policy view................................................................................................. 48
access-control users-database edit...................................................................................................48
access-control users-database view................................................................................................. 49
access-control users-list.................................................................................................................... 50
events auditing view............................................................................................................................ 51
events auditing list............................................................................................................................... 51
events auditing summary-list............................................................................................................. 53
events system list................................................................................................................................ 53
events system summary-list............................................................................................................... 54
events system view..............................................................................................................................55
hardware destroy-cluster destroy-and-change-model................................................................... 56
hardware fabrics add...........................................................................................................................56
hardware fabrics fc list........................................................................................................................ 57
hardware fabrics fc view..................................................................................................................... 57
hardware fabrics iSCSI add................................................................................................................. 58
hardware fabrics iSCSI delete............................................................................................................. 59
hardware fabrics iSCSI edit................................................................................................................. 59
hardware fabrics iSCSI list.................................................................................................................. 60
hardware fabrics iSCSI-portals add-IPv4...........................................................................................60
hardware fabrics iSCSI-portals delete-IPv4....................................................................................... 61
hardware fabrics iSCSI-portals disable-authentication..................................................................... 61
hardware fabrics iSCSI-portals enable-authentication..................................................................... 62
hardware fabrics iSCSI-portals rediscover-all................................................................................... 62
4

hardware fabrics iSCSI-portals view...................................................................................................62
hardware fabrics iSCSI view................................................................................................................63
hardware fabrics status-list.................................................................................................................64
hardware NAS-appliances add-appliance......................................................................................... 65
hardware NAS-appliances attach-controller.....................................................................................65
hardware NAS-appliances blink-appliance........................................................................................66
hardware NAS-appliances create-cluster..........................................................................................66
hardware NAS-appliances delete....................................................................................................... 67
hardware NAS-appliances detach-controller.................................................................................... 67
hardware NAS-appliances discovery list............................................................................................68
hardware NAS-appliances discovery view.........................................................................................68
hardware NAS-appliances join-appliance......................................................................................... 69
hardware NAS-appliances list.............................................................................................................69
hardware NAS-appliances reboot-controller.................................................................................... 70
hardware restore-configuration-from-storage list-lost-volumes....................................................70
hardware restore-configuration-from-storage restore-configuration............................................ 71
hardware restore-configuration-from-storage restore-lost-volumes............................................. 71
hardware restore-configuration-from-storage restore-NAS-volumes............................................72
hardware restore-configuration-from-storage restore-NAS-volumes............................................72
hardware storage-identifiers list......................................................................................................... 72
hardware storage-identifiers view...................................................................................................... 73
hardware storage-subsystem create-NAS-pool................................................................................73
hardware storage-subsystem expand-NAS-pool..............................................................................74
hardware storage-subsystem file-system-configuration edit.......................................................... 74
hardware storage-subsystem file-system-configuration view......................................................... 74
hardware storage-subsystem rescan................................................................................................. 75
hardware storage-subsystem view.....................................................................................................75
NAS-volumes add................................................................................................................................75
NAS-volumes view.............................................................................................................................. 78
NAS-volumes auditing-policy add..................................................................................................... 79
NAS-volumes auditing-policy delete................................................................................................. 79
NAS-volumes auditing-policy edit.....................................................................................................80
NAS-volumes auditing-policy list....................................................................................................... 81
NAS-volumes configuration-backups list-available.......................................................................... 81
NAS-volumes configuration-backups view-available....................................................................... 82
NAS-volumes configuration-backups restore-configuration...........................................................83
NAS-volumes clone file...................................................................................................................... 83
NAS-volumes clone volume...............................................................................................................84
NAS-volumes delete........................................................................................................................... 84
NAS-volumes edit advanced-settings................................................................................................85
NAS-volumes edit data-reduction..................................................................................................... 86
NAS-volumes edit interoperability-policy..........................................................................................87
5

NAS-volumes edit name..................................................................................................................... 87
NAS-volumes edit owner................................................................................................................... 88
NAS-volumes edit space.................................................................................................................... 88
NAS-volumes edit subnet-restrictions add-allowed-subnets..........................................................90
NAS-volumes edit subnet-restrictions delete-allowed-subnets......................................................90
NAS-volumes edit subnet-restrictions limit-to-subnets................................................................... 91
NAS-volumes list capacity-over-time last-day.................................................................................. 91
NAS-volumes list capacity-over-time last-month............................................................................ 92
NAS-volumes list capacity-over-time last-week...............................................................................93
NAS-volumes list capacity-over-time last-year................................................................................ 94
NAS-volumes list capacity-over-time now....................................................................................... 95
NAS-volumes list clones.....................................................................................................................96
NAS-volumes list data-reduction....................................................................................................... 97
NAS-volumes list snapshots............................................................................................................... 98
NAS-volumes list space...................................................................................................................... 98
NAS-volumes Namespace-Aggregation add.................................................................................... 99
NAS-volumes Namespace-Aggregation create-folder.................................................................. 100
NAS-volumes Namespace-Aggregation delete...............................................................................101
NAS-volumes Namespace-Aggregation edit................................................................................... 101
NAS-volumes Namespace-Aggregation edit-by-dsid.................................................................... 102
NAS-volumes Namespace-Aggregation list.................................................................................... 102
NAS-volumes Namespace-Aggregation view................................................................................. 103
NAS-volumes Namespace-Aggregation view-by-dsid................................................................... 103
NAS-volumes NAS-pool capacity-overtime last-day..................................................................... 104
NAS-volumes Namespace-Aggregation view-by-dsid...................................................................104
NAS-volumes NAS-pool capacity-overtime last-month................................................................ 105
NAS-volumes NAS-pool capacity-overtime last-week...................................................................106
NAS-volumes NAS-pool capacity-overtime last-year.................................................................... 106
NAS-volumes NAS-pool configuration edit.....................................................................................107
NAS-volumes NAS-pool configuration view................................................................................... 108
NAS-volumes NAS-pool view.......................................................................................................... 108
NAS-volumes nfs-export select access create................................................................................109
NAS-volumes NFS-exports add....................................................................................................... 109
NAS-Volumes nfs-export select access show..................................................................................111
NAS-volumes NFS-exports add-acl for-all-clients.......................................................................... 111
NAS-volumes NFS-exports add-acl for-clients-in-netgroup......................................................... 112
NAS-volumes NFS-exports add-acl for-clients-in-subnet..............................................................112
NAS-volumes NFS-exports add-acl for-single-client......................................................................113
NAS-volumes NFS-exports create-folder........................................................................................ 114
NAS-volumes NFS-exports delete.................................................................................................... 114
NAS-volumes NFS-exports delete-acl for-all-clients......................................................................115
NAS-volumes NFS-exports delete-acl for-clients-in-netgroup..................................................... 115
6

NAS-volumes NFS-exports delete-acl for-clients-in-subnet......................................................... 116
NAS-volumes NFS-exports delete-acl for-single-client..................................................................117
NAS-volumes NFS-exports edit........................................................................................................ 117
NAS-volumes NFS-exports list..........................................................................................................119
NAS-volumes NFS-exports view.......................................................................................................119
NAS-volumes quota directory add...................................................................................................120
NAS-volumes quota directory create-folder....................................................................................121
NAS-volumes quota directory delete............................................................................................... 121
NAS-volumes quota directory edit................................................................................................... 122
NAS-volumes quota directory list.....................................................................................................122
NAS-volumes quota directory view..................................................................................................123
NAS-volumes quota rules groups add............................................................................................. 124
NAS-volumes quota rules groups default edit................................................................................. 125
NAS-volumes quota rules groups default view................................................................................125
NAS-volumes quota rules groups delete......................................................................................... 126
NAS-volumes quota rules groups delete-by-group-ID.................................................................. 127
NAS-volumes quota rules groups edit..............................................................................................127
NAS-volumes quota rules groups list...............................................................................................128
NAS-volumes quota rules groups view............................................................................................129
NAS-volumes quota usage groups list............................................................................................. 130
NAS-volumes quota usage group view............................................................................................130
NAS-volumes quota usage group view-by-id..................................................................................131
NAS-volumes quota usage group view-effective-rules.................................................................. 132
NAS-volumes quota usage users list................................................................................................ 132
NAS-volumes quota usage users view............................................................................................. 133
NAS-volumes quota usage users view-by-id.................................................................................. 134
NAS-volumes quota usage users view-effective-rules................................................................... 134
NAS-volumes quota rules users add................................................................................................ 135
NAS-volumes quota rules users default edit....................................................................................136
NAS-volumes quota rules users default view...................................................................................137
NAS-volumes quota rules users delete............................................................................................ 137
NAS-volumes quota rules users delete-by-user-ID........................................................................ 138
NAS-volumes quota rules users edit................................................................................................ 138
NAS-volumes quota rules users-in-groups add.............................................................................. 139
NAS-volumes quota rules users-in-groups delete..........................................................................140
NAS-volumes quota rules users-in-groups delete-by-group-ID................................................... 141
NAS-volumes quota rules users-in-groups edit.............................................................................. 141
NAS-volumes quota rules users-in-groups list................................................................................142
NAS-volumes quota rules users-in-groups view.............................................................................143
NAS-volumes quota rules users list..................................................................................................144
NAS-volumes quota rules users view...............................................................................................144
NAS-volumes replication connect................................................................................................... 145
7

NAS-volumes replication create-volume-on-destination..............................................................146
NAS-volumes replication demote.................................................................................................... 146
NAS-volumes replication disable......................................................................................................147
NAS-volumes replication disconnect.............................................................................................. 148
NAS-volumes replication enable......................................................................................................148
NAS-volumes replication list-destination........................................................................................ 149
NAS-volumes replication list-source............................................................................................... 150
NAS-volumes replication modify-snapshot-retention....................................................................150
NAS-volumes replication promote................................................................................................... 151
NAS-volumes replication schedules add..........................................................................................151
NAS-volumes replication schedules delete..................................................................................... 153
NAS-volumes replication schedules edit......................................................................................... 153
NAS-volumes replication schedules list...........................................................................................154
NAS-volumes replication schedules view........................................................................................ 155
NAS-volumes replication set-QOS.................................................................................................. 156
NAS-volumes replication start.......................................................................................................... 157
NAS-volumes replication view..........................................................................................................157
NAS-volumes SMB-shares add.........................................................................................................158
NAS-volumes SMB-shares add-exclude-group..............................................................................160
NAS volumes SMB-shares add-share-level-permission................................................................. 160
NAS-volumes SMB-shares create-folder......................................................................................... 161
NAS-volumes SMB-shares delete..................................................................................................... 161
NAS-volumes SMB-shares delete-exclude-group.......................................................................... 162
NAS-volumes SMB-shares delete-share-level-permission............................................................ 162
NAS-volumes SMB-shares delete-share-level-permission-by-sid................................................ 163
NAS-volumes SMB-shares edit.........................................................................................................163
NAS-volumes SMB-shares general-settings view........................................................................... 165
NAS-volumes SMB-shares home-share disable..............................................................................165
NAS-volumes SMB-shares home-share edit................................................................................... 165
NAS-volumes SMB-shares home-share enable.............................................................................. 167
NAS-volumes SMB-shares home-share view.................................................................................. 167
NAS-volumes SMB-shares list.......................................................................................................... 168
NAS-volumes SMB-shares view....................................................................................................... 168
NAS-volumes snapshots add............................................................................................................169
NAS-volumes snapshots delete........................................................................................................170
NAS-volumes snapshots disable-expiry...........................................................................................170
NAS-volumes snapshots list.............................................................................................................. 171
NAS-volumes snapshots rename...................................................................................................... 171
NAS-volumes snapshots restore.......................................................................................................172
NAS-volumes snapshots schedules add.......................................................................................... 172
NAS-volumes snapshots schedules delete...................................................................................... 173
NAS-volumes snapshots schedules edit.......................................................................................... 174
8

NAS-volumes snapshots schedules list............................................................................................ 175
NAS-volumes snapshots schedules view......................................................................................... 176
NAS-volumes snapshots set-expiry..................................................................................................176
NAS-volumes snapshots view...........................................................................................................177
networking client-load-balancing list-sessions-of-connection.....................................................177
networking active-ndmp-sessions list............................................................................................. 178
networking active-ndmp-sessions logoff........................................................................................ 179
networking active-ndmp-sessions view.......................................................................................... 179
networking active-view-NFS-sessions............................................................................................ 180
networking active-sessions list-idle-sessions..................................................................................181
networking active-sessions list-sessions-with-many-open-files...................................................181
networking active-sessions logoff-NFS-sessions........................................................................... 182
networking active-sessions logoff-NFS-session-by-ID..................................................................183
networking active-sessions logoff-SMB-sessions...........................................................................183
networking active-sessions logoff-SMB-session-by-ID................................................................. 184
networking active-sessions list.........................................................................................................184
networking active-sessions view-SMB-session...............................................................................185
networking client-load-balancing list..............................................................................................186
networking client-load-balancing list-sessions-of-connection.................................................... 187
networking client-load-balancing mass-failback............................................................................187
networking client-load-balancing mass-rebalance........................................................................188
networking client-load-balancing move......................................................................................... 188
networking client-load-balancing pin............................................................................................. 188
networking client-load-balancing unpin......................................................................................... 189
networking client-load-balancing view...........................................................................................190
networking client-network-interface edit....................................................................................... 190
networking client-network-interface view...................................................................................... 191
networking default-gateway add......................................................................................................191
networking default-gateway delete................................................................................................. 192
networking default-gateway edit..................................................................................................... 192
networking default-gateway view....................................................................................................192
networking DNS edit......................................................................................................................... 193
networking DNS view........................................................................................................................193
networking monitor external-servers-states list............................................................................. 194
networking monitor external-servers-states view.......................................................................... 194
networking monitor performance-per-node last-day....................................................................195
networking monitor performance-per-node last-month.............................................................. 196
networking monitor performance-per-node last-week................................................................. 197
networking monitor performance-per-node last-year.................................................................. 198
networking monitor performance-per-node now..........................................................................199
networking monitor performance-summary IOPS last-day.......................................................... 200
networking monitor performance-summary IOPS last-month..................................................... 200
9

networking monitor performance-summary IOPS last-week........................................................ 201
networking monitor performance-summary IOPS last-year......................................................... 202
networking monitor performance-summary IOPS now................................................................ 203
networking monitor performance-summary read last-day........................................................... 203
networking monitor performance-summary read last-month......................................................204
networking monitor performance-per-node last-week................................................................ 205
networking monitor performance-summary read last-year.......................................................... 206
networking monitor performance-per-node last-day................................................................... 207
networking monitor performance-summary write last-day.......................................................... 208
networking monitor performance-summary write last-month.....................................................208
networking monitor performance-summary write last-week....................................................... 209
networking monitor performance-summary write last-year..........................................................210
networking monitor performance-summary write now................................................................. 211
networking open-files close............................................................................................................. 212
networking open-files close-file-by-path....................................................................................... 212
networking open-files close close-file-by-user..............................................................................213
networking open-files list................................................................................................................. 213
networking open-files view.............................................................................................................. 214
networking static-routes add........................................................................................................... 215
networking static-routes delete....................................................................................................... 215
networking static-routes edit........................................................................................................... 216
networking static-routes list.............................................................................................................216
networking static-routes view.......................................................................................................... 217
networking subnets add................................................................................................................... 218
networking subnets delete............................................................................................................... 218
networking subnets edit................................................................................................................... 219
networking subnets list.....................................................................................................................220
networking subnets view..................................................................................................................220
system administrators add................................................................................................................ 221
system administrators delete............................................................................................................222
system administrators edit................................................................................................................223
system administrators list................................................................................................................. 224
system administrators view.............................................................................................................. 225
system administrators passwordless-access add-ssh-keys........................................................... 225
system administrators passwordless-access del-ssh-key.............................................................. 226
system administrators passwordless-access modify-ssh-key........................................................226
system background-operations recent........................................................................................... 227
system background-operations running......................................................................................... 228
system background-operations view-running-operations-status.................................................229
system background-operations wait-to-finish............................................................................... 229
system data-protection antivirus-scanners add............................................................................. 230
system data-protection antivirus-scanners delete.......................................................................... 231
10

system data-protection antivirus-scanners view.............................................................................231
system data-protection cluster-partnerships add........................................................................... 231
system data-protection cluster-partnerships delete...................................................................... 232
system data-protection cluster-partnerships delete-local-partnership-by-ID.............................233
system data-protection cluster-partnerships edit...........................................................................233
system data-protection cluster-partnerships list............................................................................ 234
system data-protection cluster-partnerships update-protocol-version....................................... 234
system data-protection file-system resiliency disable....................................................................235
system data-protection file-system resiliency enable.................................................................... 235
system data-protection file-system resiliency view........................................................................235
system data-protection NDMP-configuration edit......................................................................... 236
system data-protection NDMP-configuration update-user...........................................................236
system data-protection NDMP-configuration view........................................................................237
system data-protection QOS add.................................................................................................... 237
system data-protection QOS delete................................................................................................238
system data-protection QOS list..................................................................................................... 238
system data-protection QOS modify.............................................................................................. 239
system data-protection QOS modify-schedule..............................................................................239
system data-protection QOS view.................................................................................................. 240
system data-protection tape-devices add...................................................................................... 240
system data-protection tape-devices delete...................................................................................241
system data-protection tape-devices edit.......................................................................................241
system data-protection tape-devices list........................................................................................ 242
system data-protection tape-devices view..................................................................................... 242
system EM recipients add.................................................................................................................243
system EM recipients delete.............................................................................................................243
system EM recipients edit.................................................................................................................244
system EM recipients view............................................................................................................... 244
system event-filter update-filter...................................................................................................... 245
system event-filter view................................................................................................................... 246
system file-access-notifications disable..........................................................................................246
system file-access-notifications enable.......................................................................................... 246
system file-access-notifications view..............................................................................................247
system file-access-notifications subscribers add............................................................................247
system file-access-notifications subscribers delete....................................................................... 248
system file-access-notifications subscribers edit........................................................................... 248
system file-access-notifications subscribers list.............................................................................249
system-internal BMC-network disable............................................................................................249
system-internal BMC-network edit................................................................................................. 249
system-internal BMC-network enable............................................................................................ 250
system-internal BMC-network view................................................................................................ 250
system internal cluster-name set.....................................................................................................250
11

system internal cluster-name view...................................................................................................251
system internal diagnostics list......................................................................................................... 251
system internal diagnostics run-client-connectivity-diagnostic....................................................252
system internal diagnostics run-file-system-diagnostic.................................................................253
system internal diagnostics run-general-diagnostic.......................................................................254
system internal diagnostics run-network-diagnostic..................................................................... 255
system internal diagnostics run-nfs-file-accessibility-diagnostic..................................................256
system internal diagnostics run-performance-diagnostic..............................................................257
system internal diagnostics run-smb-and-nfsdiagnostic...............................................................259
system internal diagnostics run-SMB-file-accessibility-diagnostic............................................... 259
system internal diagnostics view..................................................................................................... 260
system internal file-system background-processes configuration data-reduction set................ 261
system internal file-system background-processes configuration data-reduction view..............261
system internal file-system background-processes configuration health-scan set..................... 262
system internal file-system background-processes configuration health-scan view...................263
system internal file-system background-processes list..................................................................263
system internal file-system background-processes view...............................................................264
system internal file-system domains list..........................................................................................264
system internal file-system domains view.......................................................................................265
system internal file-system internal-storage-reservation view...................................................... 266
system internal file-system service-mode set.................................................................................266
system internal file-system service-mode view.............................................................................. 267
system internal internal-network edit..............................................................................................267
system internal language set............................................................................................................268
system internal language view......................................................................................................... 268
system-internal protocols-settings NFS-settings edit.................................................................... 268
system internal protocols-settings NFS-settings view....................................................................269
system-internal protocols-settings SMB-settings edit................................................................... 269
system-internal protocols-settings SMB-settings view...................................................................271
system internal security FTP configuration disable..........................................................................271
system internal security FTP configuration enable.......................................................................... 271
system internal security FTP configuration view............................................................................. 272
system internal security management-access management-subnet add.....................................272
system internal security management-access management-subnet delete.................................273
system internal security management-access management-subnet edit.....................................273
system internal security management-access management-subnet view................................... 274
system internal security management-access restrict....................................................................274
system internal security management-access restriction-status................................................... 275
system internal security management-access unrestrict............................................................... 275
system internal security support-access change-password...........................................................275
system internal security support-access disable.............................................................................276
system internal security support-access enable............................................................................. 276
12

system internal security support-access secure-console-access disable.....................................276
system internal security support-access secure-console-access disable-proxyauthentication................................................................................................................................... 277
system internal security support-access secure-console-access enable......................................277
system internal security support-access secure-console-access enable-proxy-authentication.277
system internal security support-access secure-console-access view.........................................278
system internal security support-access view.................................................................................278
system internal security support-assist disable............................................................................... 278
system internal security support-assist enable................................................................................279
system internal security support-assist view................................................................................... 279
system internal security ui-configuration edit.................................................................................279
system internal security ui-configuration view............................................................................... 280
system internal security ui-configuration wui-settings disable..................................................... 280
system internal security ui-configuration wui-settings enable...................................................... 280
system internal security ui-configuration wui-settings view.......................................................... 281
system internal system-configuration-state hardware-replacement-finished..............................281
system internal system-configuration-state hardware-replacement-start................................... 281
system internal system-configuration-state installation-finished..................................................282
system internal system-configuration-state view...........................................................................282
system licenses delete......................................................................................................................282
system licenses list............................................................................................................................283
system licenses load......................................................................................................................... 283
system licenses view.........................................................................................................................284
system mail-configuration disable-authentication.........................................................................285
system mail-configuration enable-authentication......................................................................... 285
system mail-configuration set......................................................................................................... 285
system mail-configuration view.......................................................................................................286
system SNMP set...............................................................................................................................287
system SNMP update-filter...............................................................................................................287
system SNMP view............................................................................................................................288
system software-updates list........................................................................................................... 289
system software-updates view........................................................................................................ 289
system software-updates approve-eula..........................................................................................290
system software-updates current-version......................................................................................290
system software-updates flash-standby-controller........................................................................291
system software-updates upgrade...................................................................................................291
system software-updates validate................................................................................................... 292
system software-updates view-available........................................................................................ 292
system time available-timezones.....................................................................................................293
system time edit................................................................................................................................294
system time view.............................................................................................................................. 294
system time set-current-time.......................................................................................................... 295
13

system time view-current-time....................................................................................................... 295
system vmware compute-resources list......................................................................................... 296
system vmware compute-resources view...................................................................................... 296
system vmware virtual-machines clone.......................................................................................... 297
system vmware virtual-machines clone-single.............................................................................. 298
system vmware virtual-machines list...............................................................................................299
system vmware virtual- machines view...........................................................................................299
system vmware vmware-servers delete..........................................................................................300
system vmware vmware-servers edit.............................................................................................. 300
system vmware vmware-servers list................................................................................................ 301
system vmware vmware-servers view............................................................................................. 301

3 CLI Procedures..................................................................................................303
Adding a NAS Appliance to a FluidFS Cluster Using the CLI .......................................................... 303

14

Preface

About This Guide
This guide provide information about using the FS8600 command-line interface (CLI) and how it can be
used to manage FluidFS clusters.

Revision History
Document number: 680-114-001
Revision

Date

Description

A

January 2016

Initial release of FluidFS v5

B

March 2016

Removed a command that is no longer valid

C

July 2016

Removed a command that is no longer valid

Audience
The intended audience for this document are storage or network administrators.

Related Documentation
The following documents comprise the core Dell FluidFS for FS8600 appliance documentation set.

Documents Intended for Dell Customers
•

Dell FluidFS Version 5.0 FS8600 Appliance Administrator’s Guide – Provides information about using
the Dell Storage Manager software to manage FS8600 appliances, and provides information about
FS8600 appliance monitoring and troubleshooting.

•

Dell FluidFS Version 5.0 FS8600 Appliance Firmware Update Guide – Provides information about
upgrading the FluidFS software from version 4.0 to 5.0.

•

Dell FluidFS Version 5.0 Release Notes – Provide information about FluidFS releases, including new
features and enhancements, open issues, and resolved issues.

•

Dell Storage Manager Installation Guide – Provides information about installing and configuring the
Dell Storage Manager Data Collector and Dell Storage Manager Client.

•

Dell Storage Manager Administrator’s Guide – Describes how to use the Dell Storage Manager
software to manage Storage Center and FS8600 appliances.

•

Dell Storage Manager Release Notes – Provides information about Dell Storage Manager releases,
including new features and enhancements, open issues, and resolved issues.

Documents Intended for Dell Installers and Certified Business Partners
•

Dell FluidFS Version 5.0 FS8600 Appliance Pre-Deployment Requirements – Provides a checklist that
assists in preparing to deploy an FS8600 appliance prior to a Dell installer or certified business partner
arriving onsite to perform an FS8600 appliance installation.

15

•

Dell FluidFS Version 5.0 FS8600 Appliance Deployment Guide – Provides information about the
deploying an FS8600, including cabling the appliance to the Storage Center and network, and
deploying the appliance using the Dell Storage Manager software.

•

Dell FS8600 Appliance Service Guide – Provides information about FS8600 appliance hardware,
system component replacement, and system troubleshooting.

•

Dell NAS Appliance SFP+ Replacement Procedure – Provides information about replacing SFP+
transceivers on an inactive system.

•

Dell FluidFS FS8600 Appliance 1Gb to 10Gb Upgrade Procedure – Provides information about
upgrading a Fibre Channel FS8600 appliance from 1Gb Ethernet client connectivity to 10Gb Ethernet
client connectivity.

16

1

About the CLI

The command line interface (CLI) provides a comprehensive set of commands for managing the FluidFS
cluster. The CLI allows you to perform the same management operations as the FluidFS NAS Manager
WebUI, as well as operations that can be performed only from the CLI.

CLI Menus
CLI commands are organized using menus and submenus. Menus group related CLI commands. The
following table lists the CLI menus that are available.
Menu

Submenus

Description

access-control

•
•

active-directory
local-users

•
•
•
•

– without-passwordcomplexity-checks
local-groups
users-database
mapping
available-backups

Use this menu to manage local
users and user groups, external
user repositories, and user
mapping policies.

events

•
•

system
auditing

Use this menu to monitor FluidFS
cluster events and SACL auditing
events.

hardware

•

NAS appliances

•

– discovery
fabrics

Use this menu to manage fabrics,
NAS appliances, the NAS pool,
and the storage subsystem;
create and destroy a FluidFS
cluster; and restore a
configuration from storage.

•

– iscsi-portals
– iscsi
– fc
storage-subsystem
storage-identifiers
restore-configuration-fromstorage
destroy-cluster

•
•
•
•

subnets
client-network-interface
default-gateway
static-routes

•
•
•

networking

About the CLI

Use this menu to manage client
subnets, the default gateway,
static routes, DNS, and client
load balancing; view SMB and

17

Menu

Submenus

Description

•
•
•
•
•
•

NDMP sessions; and monitor
performance and external
servers.

DNS, NFS
client-load-balancing
active sessions
active-ndmp-sessions
open files
monitor
– external-servers-states
– performance-per-node
– performance-summary
*
*
*

system

read
write
IOPS

•
•

time
data-protection

•
•
•
•
•
•
•

– antivirus-scanners
– NDMP-configuration
– cluster-partnerships
mail-configuration
file-system-resiliency
administrators
SNMP
licenses
software-updates
internal

Use this menu to manage the
system time, data protection,
administrators, SNMP, licensing,
software updates, the file system,
the support account, secured
management, FTP, and the
FluidFS cluster name; run
diagnostics; and monitor
background operations.

– file-system
*
*
*

service-mode
domains
background-processes
•

•

configuration

– data-reduction
– health-scan
* internal-storagereservation
security
– support-access
– management-access
* management-subnet
– FTP

•

18

* configuration
– ui-configuration
internal-network

About the CLI

Menu

Submenus
•
•
•
•
•
•

Description

cluster-name
language
diagnostics
system-configuration-state
background-operations
EM
– recipients

NAS-volumes

•

list

•

– capacity-over-time
– edit
– clone
NAS-pool

•

– configuration
– capacity-overtime
NFS-exports

•

– add-acl
– delete-acl
– general-settings
SMB-shares

•

– home-share
– general-settings
quota

Use this menu to manage NAS
volumes, clone volumes, NFS
exports,SMB shares, quota rules,
snapshots, replication, and
configuration backups; and
monitor quota usage.

– rules
*

users

*
*

• default
users-in-groups
groups

• default
– usage

About the CLI

•

* users
* groups
snapshots

•

– schedules
replication

•
•

– schedules
namespace aggregation
configuration-backups

19

CLI Command Syntax
CLI commands have the following structure:
CLI>     -
where:
•

CLI> – Command prompt where you type the command

•

 – Name of the main menu

•

 – Names of one or more submenus (separated with spaces). Certain menus have
multiple levels of submenus.

•

 – Name of the command that you want to execute

•

 – Arguments (separated with spaces) that you must enter with the command to
execute the command successfully. You might have none or multiple arguments depending on the
command that you want to execute. You must enter the arguments for a command in the correct
order.

•

 – Options (separated with a space) that are available for a command. You might have
none or multiple options depending on the command that you want to execute and you might need
to enter at least one of the available options for the command to execute successfully. Each option
for a command must start with a hyphen (-).

Navigating the CLI
When navigating the CLI, the following commands are available throughout the system:
•

back — Moves back one level in the menu hierarchy

•

main — Returns to the main menu

•

help — Lists information about currently available menus, commands, arguments, and options

•

history — Lists previously executed commands

•

exit or quit — Exits the CLI

•

find — Lists menus and commands containing the text you supply

Entering Commands in the CLI
There are two ways to enter commands in the CLI:
•

Enter a command by navigating one menu at a time

•

Enter a single line command

Tab completion is available in the CLI. You can press the Tab key to automatically complete a menu,
submenu, command, or option name after entering a unique portion of the name. This can be useful in
completing long commands. For example, entering net and then pressing Tab is the same as entering
networking. If there are several items that begin with those characters, the CLI displays the possibilities.
For example, entering NAS-volumes n and then pressing Tab displays NAS-pool and NFS-exports.
Press Tab again to see the available submenus, commands, and options under the given string. For
example, entering events and then pressing Tab twice displays the available events commands: list
and view.

20

About the CLI

The CLI also lets you abbreviate a command if the abbreviation uniquely identifies the command. For
example, the following commands are identical: events list and events li.

Enter a Command by Navigating One Menu at a Time
Enter a command by navigating through the CLI one menu at a time.
1.

Type the  and press the Enter key.
The available submenus and commands under the menu are displayed.

2.

If needed, type the  and press the Enter key.
The available submenus and commands under the submenu are displayed.

3.

Repeat Step 2 until you reach the submenu level containing the command that you want to execute.

4.

Type   - and press the Enter key.
The command is executed.

Example:
1.

Type access-control and press the Enter key.

2.

Type mapping and press the Enter key.

3.

Type manual and press the Enter key.

4.

Type add NAS jsmith johns -EnableWindowsToUNIXMapping Yes and press the Enter key.

Enter a Single Line Command
To enter a single line CLI command:
Type:     - and press
the Enter key.
The command is executed.
Example:
Type: access-control mapping manual add NAS jsmith johns
EnableWindowsToUNIXMapping Yes and press the Enter key.

CLI Output
Depending on the command, all available output might be displayed, or just the beginning of the output
might be displayed along with the following message describing the options available for navigating the
output.
 % Press Enter for next line Space for next page or ESC to
stop paging.
For some commands with lengthy output, the following options are available:
•

% — Displays the percentage of output displayed

•

Enter — Pressing Enter displays the next line of output

•

Space — Pressing Space displays the next page of output

About the CLI

21

•

ESC — Pressing Esc returns you to a command prompt

Getting Help on the CLI
The CLI provides online help for menus, commands, arguments, and options. At any time while using the
CLI, you can type help to see more information about the available menus, commands, arguments, and
options.

Example 1
CLI/access-control/mapping/manual> help
Available commands:
list
view
add
delete
restore

Example 2
CLI/access-control/mapping/manual> help view
view - Modify the mapping rule between a Windows and UNIX user

Accessing the CLI
Log on to the CLI using either a VGA console or a secure shell (SSH) session.

Connect to the FluidFS Cluster CLI Using a VGA Console
Log on to the CLI using a VGA console to manage the FluidFS cluster.
NOTE: Connect a monitor to the NAS controller’s VGA port and connect a keyboard to one of the
NAS controller’s USB ports.
1.

From the command line, type the following command at the login as prompt:
cli

2.

Type the FluidFS cluster administrator user name at the login as prompt.
The default user name is Administrator.

3.

Type the FluidFS cluster administrator password at the ’s password prompt.
The default password is Stor@ge!. You are logged on to the CLI and a Welcome window is displayed,
listing the installed FluidFS version and the available commands in the main menu.

Connect to the FluidFS Cluster CLI Through SSH Using a Password
Log on to the CLI through SSH to manage the FluidFS cluster.
1.

Use either of the following options:
•

22

Using an SSH client, connect to a client VIP. From the command line, type the following
command at the login as prompt:
cli

About the CLI

•

Using a UNIX/Linux workstation, type the following command from a prompt:
ssh cli@

2.

Type the FluidFS cluster administrator user name at the login as prompt. The default user name is
Administrator.

3.

Type the FluidFS cluster administrator password at the ’s password prompt. The default
password is Stor@ge!. You are logged on to the CLI and a Welcome window is displayed, listing the
installed FluidFS version and the available commands in the main menu.

Connect to the FluidFS Cluster CLI Through SSH Without Using a Password
You can use SSH keys to bypass the SSH login prompt to manage the FluidFS cluster.
1.

Log on to a UNIX/Linux workstation for which you want to bypass the SSH login prompt.

2.

From the command line, type the following command:
ssh-keygen -t rsa

3.

Press Enter at the Enter file in which to save the key (/home//.ssh/id_rsa) prompt.

4.

Press Enter at the Enter passphrase (empty for no passphrase) prompt and again at the Enter same
passphrase again prompt. An SSH key is generated at /home//.ssh/id_rsa.pub.

5.

Copy the SSH key.

6.

Log on to the CLI using a password.

7.

Type the following command:
system administrators passwordless-access add-ssh-keys Administrator
 “”
Now you can use the following command to log on to the FluidFS cluster from the workstation
without needing a password:
ssh @
You can also use the following format to run commands from the workstation without needing a
password:
ssh @ 

About the CLI

23

2

CLI Commands
This section describes the available FluidFS cluster CLI commands.

access-control active-directory join
Join the FluidFS cluster to Active Directory.

Format
access-control active-directory join  {options}

Arguments
Argument

Description

Format



Active Directory domain

Existing Active Directory domain
name

Option

Description

Format

-Username 

Active Directory administrator
name

Existing Active Directory
administrator user name. The
user should preferably be a
domain administrator, or at least
have the ability to add a
computer object to the domain.

-Password 

Active Directory administrator
password

Existing Active Directory
administrator password. If this
option is not given, it will be
prompted for, and the text will
not appear on the screen.

Options

Example
Join the FluidFS cluster to the Active Directory domain nas.test using the Active Directory administrator
username Administrator and password password:
CLI> access-control active-directory join nas.test -Username Administrator
-Password password

24

CLI Commands

access-control active-directory leave
Description
Disconnect the FluidFS cluster from the Active Directory domain.

Format
access-control active-directory leave

Example
Disconnect the FluidFS cluster from the Active Directory domain:
CLI> access-control active-directory leave

access-control active-directory modify-settings
The system selects which controllers to use automatically, based on the sites defined in Active Directory.
You can override this automatic selection and specify a list of preferred domain controllers.

Format
access-control active-directory modify-settings 

Example
To specify a list of preferred domain controllers:
CLI> access-control active-directory modify-settings 10.56.1.3,10.56.1,4

access-control active-directory status
Display the Active Directory status.

Format
access-control active-directory status

Example
Display the current Active Directory status:
CLI> access-control active-directory status

Output
Configured
= Yes
Status
= Optimal (all domain info is received successfully)
Domain
= QA.DELL-IDC.COM
DomainControllers =
.-----------------.-----------------------.------------.--------.--------.

CLI Commands

25

| Domain
| DC Name
| DC IP
| Trust | Online |
|-----------------|-----------------------|------------|--------|--------|
| Dell-IDC.com
| DC3.Dell-IDC.com
|172.22.144.2| Two-way| Yes
|
|-----------------|-----------------------|------------|--------|--------|
| QA.Dell-IDC.com | CHID2.QA.DEll-IDC.com | 10.48.28.34| Primary| Yes
|
|-----------------|-----------------------|------------|--------|--------|
| QA2.Dell-IDC.com|
|
| Two-way| Yes
|
'-----------------'-----------------------'------------'--------.--------.
Preferred Domain Controllers = .-----------.-------------.
| DC Name
| DC IP
|
|-----------|-------------|
|
|
|
.-----------.-------------.

access-control available-backups list
Display a list of available backups for global configuration.

Format
access-control available-backups list

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the current list of available backups for global configuration:
CLI> access-control available-backups list

Output
.--------------.--------------------.
| Cluster Name | Backup Time
|
|--------------|--------------------|
| idffs2
| 05-Aug-14 09:19:02 |
'--------------'--------------------'

access-control computers-list
Display a list of machine accounts (computers) in Active Directory.

Format
access-control computers-list  

26

CLI Commands

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

-Domain

Account domain, the available
domains are displayed by
“domains-list” command

AccountNamePrefix

Prefix of computer name to be
displayed by the command

Example
Display a list of machine accounts (computers) in Active Directory.
CLI> access-control computers-list

Output
.-----------------.-----------------.----------------------| Domain
| Type
| Computer Name
|
|-----------------|-----------------|-----------------------|
|  | UNIX
|win2k12d-m380.lab.town |
|-----------------|-----------------|-----------------------|
| BUILTIN
| Local
|win2k12d-m380.lab.town |
|-----------------|-----------------|-----------------------|
| idffs1
| Local
|win2k12d-m380.lab.town |
|-----------------|-----------------|-----------------------|
| NAS
| ActiveDirectory |win2k12d-m380.lab.town |
'-----------------'-----------------'-----------------------|

access-control domains-list
Display a list of user and group domains.

Format
access-control domains-list

Example
Display a list of the current user and group domains:
CLI> access-control domains-list

CLI Commands

27

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

-Remarks Remarks>

Group description

Text description of the group

Output
.-----------------.-----------------.
| Domain
| Type
|
|-----------------|-----------------|
|  | UNIX
|
|-----------------|-----------------|
| BUILTIN
| Local
|
|-----------------|-----------------|
| idffs1
| Local
|
|-----------------|-----------------|
| NAS
| Active Directory|
'-----------------'-----------------'

access-control groups-list
Display a list of groups.

Format
access-control groups-list  

Arguments
Argument

Description

Format

-Domain 

Group domain

Existing group domain

-GroupNameStartWith


Prefix of group name

Prefix of an existing group name

Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

-Remarks 

Group description

Options

28

CLI Commands

Example
Display a list of groups in the NAS domain whose group name starts with d:
CLI> access-control groups-list NAS d

Output
.--------.----------------------.----------------------.---------.----------.
| Domain | Name
| Id
| Type
| Source
|
|--------|----------------------|----------------------|---------|----------|
| NAS
| DHCP Administrators | S-1-5-21-1100376456-3| Windows | EXTERNAL |
|
|
| 253980028-2903806399-|
|
|
|
|
| 1104
|
|
|
|--------|----------------------|----------------------|---------|----------|
| NAS
| DnsAdmins
| S-1-5-21-1100376456-3| Windows | EXTERNAL |
|
|
| 253980028-2903806399-|
|
|
|
|
| 1101
|
|
|
|--------|----------------------|----------------------|---------|----------|
| NAS
| Domain Admins
| S-1-5-21-1100376456-3| Windows | EXTERNAL |
|
|
| 253980028-2903806399-|
|
|
|
|
| 512
|
|
|
|--------|----------------------|----------------------|---------|----------|
| NAS
| Domain Computers
| S-1-5-21-1100376456-3| Windows | EXTERNAL |
|
|
| 253980028-2903806399-|
|
|
|
|
| 515
|
|
|
|--------|----------------------|----------------------|---------|----------|
| NAS
| Domain Controllers
| S-1-5-21-1100376456-3| Windows | EXTERNAL |
|
|
| 253980028-2903806399-|
|
|
|
|
| 516
|
|
|
|--------|----------------------|----------------------|---------|----------|
| NAS
| Domain Guests
| S-1-5-21-1100376456-3| Windows | EXTERNAL |
|
|
| 253980028-2903806399-|
|
|
|
|
| 514
|
|
|
|--------|----------------------|----------------------|---------|----------|
| NAS
| Domain Users
| S-1-5-21-1100376456-3| Windows | EXTERNAL |
|
|
| 253980028-2903806399-|
|
|
|
|
| 513
|
|
|
'--------'----------------------'----------------------'---------'----------'

access-control local-groups add
Add a local group.

Format
access-control local-groups add 

Arguments
Argument

Description

Format



Local group name

Contains only the following
characters: letters, numbers,
underscores, hyphens, spaces,
and periods. A period cannot be

CLI Commands

29

Argument

Description

Format
used as the last character of the
account name.

Options
Options

Description

Format

-Remarks 

Group description

Text description of the group

Example
Add a local group named groupA:
CLI> access-control local-groups add groupA

access-control local-groups add-external-computer
Add an external computer to a local group.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
access-control local-groups add-external-computer 
 

Arguments
Argument

Description

Format



External computer domain

Existing external computer
domain name



External computer name

Existing external computer name



Local group name

Existing local group name

Example
Add an external computer named MyComputer in the NAS domain to a local group named groupA:
CLI> access-control local-groups add-external-computer NAS MyComputer groupA

access-control local-groups add-external-group
Add an external group to a local group.
NOTE: To view a list of existing domains, use the command access-control domains-list.

30

CLI Commands

Format
access-control local-groups add-external-group  


Arguments
Argument

Description

Format



External user domain

Existing external user domain
name



External group name

Existing external group name



Local group name

Existing local group name

Example
Add an external group named groupABC in the NAS domain to a local group named groupA:
CLI> access-control local-groups add-external-group NAS groupABC groupA

access-control local-groups add-external-user
Add an external user to a local group.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
access-control local-groups add-external-user  


Arguments
Argument

Description

Format



External user domain

Existing external user domain
name



External user name

Existing external user name



Local group name

Existing local group name

Example
Add an external user named jsmith in the NAS domain to a local group named groupA:
CLI> access-control local-groups add-external-user NAS jsmith groupA

CLI Commands

31

access-control local-groups add-local-user
Add a local user to a local group.

Format
access-control local-groups add-local-user 


Arguments
Argument

Description

Format



Local user name

Existing local user name



Local group name

Existing local group name

Example
Add a local user named user1 to a local group named groupA:
CLI> access-control local-groups add-local-user user1 groupA

access-control local-groups delete
Delete a local group.
NOTE: A group must be empty before it can be deleted.

Format
access-control local-groups delete 

Arguments
Argument

Description

Format



Local group name

Existing local group name

Example
Delete a local group named groupB:
CLI> access-control local-groups delete groupB

access-control local-groups delete-external-computer
Delete an external computer from a local group.
NOTE: To view a list of existing domains, use the command access-control domains-list.

32

CLI Commands

Format
access-control local-groups delete-external-computer 
 

Arguments
Argument

Description

Format



External computer domain

Existing external computer
domain name



External computer name

Existing externalcomputer name



Local group name

Existing local group name

Example
Delete an external computer named MyComputer from the NAS domain to a local group named groupA:
CLI> access-control local-groups delete-external-computer NAS MyComputer NAS
jsmith groupA

access-control local-groups delete-external-group
Delete an external group from a local group.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
access-control local-groups delete-external-group  


Arguments
Argument

Description

Format



External group domain

Existing external group domain
name



External group name

Existing external group name



Local group name

Existing local group name

Example
Delete an external group named groupABC in the NAS domain from a local group named groupA:
CLI> access-control local-groups delete-external-group NAS groupABC groupA

CLI Commands

33

access-control local-groups delete-external-user
Delete an external user from a local group.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
access-control local-groups delete-external-user  


Arguments
Argument

Description

Format



External user domain

Existing external user domain
name



External user name

Existing external user name



Local group name

Existing local group name

Example
Delete an external user named jsmith in the NAS domain from a local group named groupA:
CLI> access-control local-groups delete-external-user NAS jsmith groupA

access-control local-groups delete-local-user
Delete a local user from a local group.

Format
access-control local-groups delete-local-user  

Arguments
Argument

Description

Format



Local user name

Existing local user name



Local group name

Existing local group name

Example
Delete a local user named user1 from a local group named groupA:
CLI> access-control local-groups delete-local-user user1 groupA

34

CLI Commands

access-control local-groups list
Display a list of the local groups.

Format
access-control local-groups list

Example
Display the current list of local groups:
CLI> access-control local-groups list

Output
.------------------.--------------------.--------------.--------------------.
| Group Name
| LocalUsers
| DomainUsers | DomainGroups
|
|------------------|--------------------|-------------|--------------------|
| Administrators
| .---.--------.
| .---.---. | .--------.---.
|
|
| | U | User
|
| | U | U | | | Group | G |
|
|
| | s | Name
|
| | s | s | | | Domain | r |
|
|
| | e |
|
| | e | e | | |
| o |
|
|
| | r |
|
| | r | r | | |
| u |
|
|
| | D |
|
| | D | N | | |
| p |
|
|
| | o |
|
| | o | a | | |
| N |
|
|
| | m |
|
| | m | m | | |
| a |
|
|
| | a |
|
| | a | e | | |
| m |
|
|
| | i |
|
| | i |
| | |
| e |
|
|
| | n |
|
| | n |
| | |--------|---|
|
|
| |---|--------|
| |---|---| | '--------'---'
|
|
| | i | Admini |
| '---'---' |
|
|
| | d | strato |
|
|
|
|
| | f | r
|
|
|
|
|
| | f |
|
|
|
|
|
| | s |
|
|
|
|
|
| | 1 |
|
|
|
|
|
| '---'--------'
|
|
|
|------------------|--------------------|-------------|--------------------|
| Backup Operators | .---.--------.
| .---.---. | .--------.---.
|
|
| | U | User
|
| | U | U | | | Group | G |
|
|
| | s | Name
|
| | s | s | | | Domain | r |
|
|
| | e |
|
| | e | e | | |
| o |
|
|
| | r |
|
| | r | r | | |
| u |
|
|
| | D |
|
| | D | N | | |
| p |
|
|
| | o |
|
| | o | a | | |
| N |
|
|
| | m |
|
| | m | m | | |
| a |
|
|
| | a |
|
| | a | e | | |
| m |
|
|
| | i |
|
| | i |
| | |
| e |
|
|
| | n |
|
| | n |
| | |--------|---|
|
|
| |---|--------|
| |---|---| | '--------'---'
|
|
| '---'--------'
| '---'---' |
|
|------------------|--------------------|-------------|--------------------|
| groupA
| .---.--------.
| .---.---. | .--------.---.
|
|
| | U | User
|
| | U | U | | | Group | G |
|
|
| | s | Name
|
| | s | s | | | Domain | r |
|
|
| | e |
|
| | e | e | | |
| o |
|
|
| | r |
|
| | r | r | | |
| u |
|
|
| | D |
|
| | D | N | | |
| p |
|

CLI Commands

35

|
| | o |
|
| | o | a | | |
| N |
|
|
| | m |
|
| | m | m | | |
| a |
|
|
| | a |
|
| | a | e | | |
| m |
|
|
| | i |
|
| | i |
| | |
| e |
|
|
| | n |
|
| | n |
| | |--------|---|
|
|
| |---|--------|
| |---|---| | '--------'---'
|
|
| '---'--------'
| '---'---' |
|
|------------------|--------------------|-------------|--------------------|
| groupB
| .---.--------.
| .---.---. | .--------.---.
|
|
| | U | User
|
| | U | U | | | Group | G |
|
|
| | s | Name
|
| | s | s | | | Domain | r |
|
|
| | e |
|
| | e | e | | |
| o |
|
|
| | r |
|
| | r | r | | |
| u |
|
|
| | D |
|
| | D | N | | |
| p |
|
|
| | o |
|
| | o | a | | |
| N |
|
|
| | m |
|
| | m | m | | |
| a |
|
|
| | a |
|
| | a | e | | |
| m |
|
|
| | i |
|
| | i |
| | |
| e |
|
|
| | n |
|
| | n |
| | |--------|---|
|
|
| |---|--------|
| |---|---| | '--------'---'
|
|
| '---'--------'
| '---'---' |
|
|------------------|--------------------|-------------|--------------------|
...[snip]...

access-control local-groups restore
Restore local groups from another FluidFS cluster.

Format
access-control local-groups restore 

Arguments
Argument

Description

Format



FluidFS cluster name from where
the local groups should be
restored

Existing FluidFS cluster name

Example
Restore local groups from a FluidFS cluster named idffs1:
CLI> access-control local-groups restore idffs1

access-control local-groups view
Display the settings for a local group.

Format
access-control local-groups view 

36

CLI Commands

Arguments
Argument

Description

Format



Local group name

Existing local group name

Option

Description

Format

-Remarks 

Group description

Text description of the group

Options

Example
Display the settings for a local group named groupA:
CLI> access-control local-groups view groupA

Output
Group Name
LocalUsers

= groupA
= .-------------.-----------.
| User Domain | User Name |
|-------------|-----------|
| idffs1
| user1
|
'-------------'-----------'

DomainUsers

=

DomainGroups =

.-------------.-----------.
| User Domain | User Name |
|-------------|-----------|
'-------------'-----------'
.--------------.------------.
| Group Domain | Group Name |
|--------------|------------|
'--------------'------------'

access-control local-users add
Add a local user to users and groups so that you can grant that user access to SMB shares and NFS
exports.

Format
access-control local-users add   {options}

Arguments
Argument

Description

Format



Local user name

Contains only the following
characters: letters, numbers,
underscores, hyphens, spaces,
and periods. A period cannot be

CLI Commands

37

Argument

Description

Format
used as the last character of the
account name.



Primary group of the local user
(must be a local group)

Existing local group name

Option

Description

Format

-Password 

Local user password

Includes at least seven characters
and should contain at least three
of the following character types:
lowercase character, uppercase
character, digit, special
characters (for example, +, ?, and
*)

-RealName 

Full user name

Existing user’s full name

-Remarks 

User description

Description of the user

Options

Example
Add a local user named user1 with the password Pass123 to the group groupA:
CLI> access-control local-users add user1 groupA -Password Pass123

access-control local-users change-password
Change a local user password.

Format
access-control local-users change-password  {options}

Arguments
Argument

Description

Format



Local user name

Existing local user name

Option

Description

Format

-Password 

Local user password

Includes at least seven characters
and should contain at least three
of the following character types:
lowercase character, uppercase
character, digit, special

Options

38

CLI Commands

Option

Description

Format
characters (for example, +, ?, and
*)

Example
Change the password for a local user named user1 to Password123:
CLI> access-control local-users change-password user1 -Password Password123

access-control local-users delete
Delete a local user.

Format
access-control local-users delete 

Arguments
Argument

Description

Format



Local user name

Existing local user name

Example
Delete a local user named user1:
CLI> access-control local-users delete user1

access-control local-users edit
Modify local user settings.

Format
access-control local-users edit  {options}

Arguments
Argument

Description

Format



Local user name

Existing local user name

CLI Commands

39

Options
Option

Description

Format

-PrimaryGroupName


Primary group of the local user
(must be a local group)

Existing local group name

-Enabled 

Indicate whether the local user is Possible values are Yes, No
enabled

-PasswordNeverExpires


Indicate whether the local user
password will never expire

Possible values are Yes, No

-RealName 

Full user name

Full name of existing user

-Remarks 

User description

Text description of user

Example
Move a local user named user1 to the group groupB:
CLI> access-control local-users edit user1 -PrimaryGroupName groupB

access-control local-users list
Display a list of the local users.

Format
access-control local-users list

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display a list of the current local users:
CLI> access-control local-users list

Output
.---------------.---------------.---------.-----------------------------.
| User Name
| Primary Group | Enabled | Password Is About To Expire |
|---------------|---------------|---------|-----------------------------|
| Administrator | Local Users
| Yes
| No
|
|---------------|---------------|---------|-----------------------------|
| nobody
| nobody_group | No
| No
|
|---------------|---------------|---------|-----------------------------|

40

CLI Commands

| user1
| groupA
| Yes
| No
|
'---------------'---------------'---------'-----------------------------'

access-control local-users restore
Restore local users from another FluidFS cluster.

Format
access-control local-users restore 

Arguments
Argument

Description

Format



FluidFS cluster name
from where the local
users should be
restored

Existing FluidFS cluster
name

Example
Restore local users from a FluidFS cluster named idffs1:
CLI> access-control local-users restore idffs1

access-control local-users view
Display the settings for a local user.

Format
access-control local-users view 

Arguments
Argument

Description

Format



Local user name

Existing local user name

Option

Description

Format

-RealName 

Full user name

Full name of user

-Remarks 

User description

Text description of user

Options

Example
Display the settings for a local user named user1:
CLI> access-control local-users view user1

CLI Commands

41

Output
User Name
Primary Group
Enabled
Password Is About To Expire
Password Never Expires

=
=
=
=
=

user1
groupA
Yes
No
Yes

access-control local-users view-groups
Display the groups to which a local user belongs.

Format
access-control local-users view-groups 

Arguments
Argument

Description

Format



Local user name

Existing local user name

Example
Display the groups to which a local user named user1 belongs:
CLI> access-control local-users view-groups user1

Output
User Nam = user1
MemberOf = groupA

access-control local-users without-passwordcomplexity-checks add-user
Add a local user without password-complexity checks.
NOTE: Before adding a local user without password-complexity checks, password‑complexity
enforcement must be disabled using the command system internal protocols-settings
SMB-settings edit.

Format
access-control local-users without-password-complexity-checks add-user
  {options}

Arguments
Argument

Description

Format



Local user name

Contains only the following
characters: letters, numbers,

42

CLI Commands

Argument

Description

Format
underscores, hyphens, spaces,
and periods. A period can not be
used as the last character of the
account name.



Primary group of the local user
(must be a local group)

Existing local group name

Option

Description

Format

-Password 

Local user password

Any string

Options

Example
Add a local user named user1 without password-complexity checks to the group groupA:
CLI> access-control local-users without-password-complexity-checks add-user
user1 groupA -Password Pass

access-control local-users without-passwordcomplexity-checks change-password
Change a local user password without password-complexity checks.

Format
access-control local-users without-password-complexity-checks change-password
 {options}

Arguments
Argument

Description

Format



Local user name

Existing local user name

Option

Description

Format

-Password 

Local user password

Any string

Options

Example
Change the password for a local user (without password-complexity checks) named user1 to Pswd:
CLI> access-control local-users without-password-complexity-checks changepassword user1 -Password Pswd

CLI Commands

43

access-control mapping manual add
Add a user mapping rule between a Windows and UNIX user.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
access-control mapping manual add  
 {options}

Arguments
Argument

Description

Format



Domain of the Windows user

Existing Windows domain



Name of the Windows user

Existing Windows user



Name of the UNIX user

Existing UNIX user

Options
Option

Description

Format

-EnableWindowsToUNIXMapping


Indicate whether the
Windows to UNIX mapping
is enabled

Possible values are Yes, No.
Default is Yes.

-EnableUNIXToWindowsMapping


Indicate whether the UNIX
to Windows mapping is
enabled

Possible values are Yes, No.
Default is Yes.

Example
Add a Windows to UNIX user mapping rule between a Windows user named jsmith in the NAS domain
and a UNIX user named johns:
CLI> access-control mapping manual add NAS jsmith johnsEnableWindowsToUNIXMapping Yes

access-control mapping manual delete
Delete a user mapping rule between a Windows and UNIX user.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
access-control mapping manual delete  


44

CLI Commands

Arguments
Argument

Description

Format



Domain of the Windows user

Existing Windows domain



Name of the Windows user

Existing Windows user



Name of the UNIX user

Existing UNIX user

Example
Delete the user mapping rule between a Windows user named jsmith in the NAS domain and a UNIX user
named johnf:
CLI> access-control mapping manual delete NAS jsmith johnf

access-control mapping manual edit
Modify a user mapping rule between a Windows and UNIX user.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
access-control mapping manual edit  
 {options}

Arguments
Argument

Description

Format



Domain of the Windows user

Existing Windows domain



Name of the Windows user

Existing Windows user



Name of the UNIX user

Existing UNIX user

Description

Format

Options
Option

-EnableWindowsToUNIXMapping Indicate whether the Windows to Possible values are Yes, No

-EnableUNIXToWindowsMapping Indicate whether the UNIX to


CLI Commands

Possible values are Yes, No

45

Example
Modify the user mapping rule between a Windows user named jsmith in the NAS domain and a UNIX user
named johns to use UNIX to Windows mapping:
CLI> access-control mapping manual edit NAS john jsmith EnableUNIXToWindowsMapping Yes

access-control mapping manual list
Display a list of the user mapping rules between Windows and UNIX users.

Format
access-control mapping manual list

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a current list of the user mapping rules between Windows and UNIX users:
CLI> access-control mapping manual list

Output
.--------------.--------------.--------------.---------------.---------------.
| Windows User | Windows User | Unix User
| Enable
| Enable Unix
|
| Domain
| Name
| Name
| Windows To
| To Windows
|
|
|
|
| Unix Mapping | Mapping
|
|--------------|--------------|--------------|---------------|---------------|
| NAS
| jsmith
| johns
| Yes
| Yes
|
'--------------'--------------'--------------'---------------'---------------'

access-control mapping manual restore
Restore manual user mappings from another FluidFS cluster.

Format
access-control mapping manual restore 

46

CLI Commands

Arguments
Argument

Description

Format



FluidFS cluster name from where
the manual mappings should be
restored

Existing FluidFS cluster name

Example
Restore manual user mappings from a FluidFS cluster named idffs1:
CLI> access-control mapping manual restore idffs1

access-control mapping manual view
Display a user mapping rule between a Windows and UNIX user.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
access-control mapping manual view  


Arguments
Argument

Description

Format



Domain of the Windows user

Existing Windows domain



Name of the Windows user

Existing Windows user



Name of the UNIX user

Existing UNIX user

Example
Display the user mapping rule between a Windows user named jsmith in the NAS domain and a UNIX user
named johnk:
CLI> access-control mapping manual view NAS jsmith johnk

Output
Windows User Domain
=
Windows User Name
=
Unix User Name
=
Enable Windows To Unix Mapping =
Enable Unix To Windows Mapping =

CLI Commands

NAS
jsmith
johns
Yes
Yes

47

access-control mapping policy edit
Modify user mapping policy settings.

Format
access-control mapping policy edit {options}

Options
Option

Description

Format

-AutomaticMapping


Indicate whether the automatic
mapping between Windows and
UNIX users is enabled

Possible values are Yes, No

Example
Enable automatic user mapping between Windows and UNIX users:
CLI> access-control mapping policy edit -AutomaticMapping Yes

access-control mapping policy view
Display user mapping policy settings.

Format
access-control mapping policy view

Example
Display the current user mapping policy settings:
CLI> access-control mapping policy view

Output
Automatic Mapping = No

access-control users-database edit
Modify the NIS/LDAP settings.
NOTE: You cannot switch between NIS and LDAP without first setting the DatabaseType to None.

Format
access-control users-database edit {options}

48

CLI Commands

Options
Option

Description

Format

-DatabaseType 

Indicate which repository the
FluidFS cluster is using

Possible values are LDAP, NIS,
None

-NISDomain 

NIS domain

Existing NIS domain

-NISServers 

List of NIS servers

Comma-separated list of existing
NIS servers

-LDAPBaseDN 

LDAP Base DN

Existing LDAP Base DN

-LDAPServers 

List of LDAP servers

Comma-separated list of existing
LDAP servers

-LDAPFilters

List of LDAP filters

Comma-separated list of existing
LDAP filters

-LDAPFiltersEnabled


Indicates whether the filters are
enabled

Possible values are Yes, No

-LDAPExtendedSchema


Indicate whether LDAP uses an
extended schema

Possible values are Yes, No

-LDAPUseTLS 

Indicate whether LDAP uses TLS

Possible values are Yes, No

-LDAPUseNotAnonymous


Indicate whether LDAP uses an
anonymous connection

Possible values are Yes, No

-LDAPBindDN 

LDAP bind DN

Existing LDAP bind DN

-LDAPBindPassword


LDAP bind password

Existing LDAP bind password

-LdapUseCertificate


Indicate whether LDAP uses a
certificate

Possible values are Yes, No

-LdapCertificate


LDAP certificate

Existing LDAP certificate in
Base64 format

Example
Add an LDAP server 172.22.144.4 using the Base DN dc=nas,dc=test:
CLI> access-control users-database edit -LDAPServers 172.22.144.4-DatabaseType
LDAP -LDAPBaseDN "dc=nas,dc=test"

access-control users-database view
Display NIS/LDAP settings.

Format
access-control users-database view

CLI Commands

49

Example
Display the current NIS/LDAP settings:
CLI> access-control users-database view

Output
Database Type
NisServers
LDAP Base DN
LdapServers
LDAP Extended Schema
LDAP Use Filters
LDAP Filters
LDAP Use TLS
LDAP Use Not Anonymous
LDAP Bind DN
LdapUseCertificate
LdapCertificate

=
=
=
=
=
=
=
=
=
=
=
=

LDAP
dc=nas,dc=test
172.22.144.4
No
No
No
No
cn=proxyuser,dc=example,dc=com
No

access-control users-list
Display a list of users.

Format
access-control users-list  

Arguments
Argument

Description

Format

-Domain 

User domain

Existing user domain

-UserNameStartWith


Prefix of user name

Prefix of an existing user name

Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Options

Example
Display a list of users in the NAS domain whose user name starts with ca:
CLI> access-control users-list NAS ca

50

CLI Commands

Output
.--------.--------.---------------------.---------------.---------.----------.
| Domain | Name
| Id
| Primary group | Type
| Source
|
|--------|--------|---------------------|---------------|---------|----------|
| NAS
| carl
| S-1-5-21-1100376456 | Domain Users | Windows | EXTERNAL |
|
|
| -3253980028-2903806 |
|
|
|
|
|
| 399-1165
|
|
|
|
|--------|--------|---------------------|---------------|---------|----------|
| NAS
| carla | S-1-5-21-1100376456 | Domain Users | Windows | EXTERNAL |
|
|
| -3253980028-2903806 |
|
|
|
|
|
| 399-1114
|
|
|
|
'--------'--------'---------------------'---------------'---------'----------'|

events auditing view
Display the details of a single event.

Format
events auditing view 

Arguments
Argument

Description

Format



Unique ID of the event

Existing event ID

Example
Display the details of event 1975784:
CLI> events audit view 5188

Output
Event ID
= 17000001
Event Time
= 08-Dec-14 12:35:41
Severity
= Info
Workspace
= System Audit
Headline
= Successful Write by CPLSUP3\Administrator on jvol1/secret.txt
Text
= Description: The User CPLSUP3\Administrator performed a
successful write operation
on file jvol1/secret.txt. The Desired access mask: WRITE_DATA/
ADD_FILE (0x2)
Action Items =
Internal Info =

events auditing list
Display a list of the security events.

Format
events auditing list

CLI Commands

51

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

--Severity 

Filter according to the severity of
the events

--Period 

Filter according to the period of
the events

--ConsolidatedEventID


Enter this option to get
occurrences of consolidated
events

--HeadlineSubText


Filter according to headline sub
text.

Example
Display a current list of the security events:
CLI> events auditing list

Output
.-------------.----------.------------.-----------.--------.-------------------.
| Consolidated| Event ID | Event First| Event Last|Severity| Headline
|
| Event ID
|
| Occurrence | Occurrence|
|
|
|-------------|----------|------------|-----------|--------|-------------------|
| 5188
| 117000001| 08-Dec-14 | 08-Dec-14 | Info
| Successful Write |
|
|
| 12:05:06
| 12:05:06 |
| by CPLSUP3\
|
|
|
|
|
|
| Administrator on |
|
|
|
|
|
| jvoli/secret.txt |
|-------------|----------|------------|-----------|--------|-------------------|
| 5189
| 117000004| 08-Dec-14 | 08-Dec-14 | Info
| Successful Read
|
|
|
| 12:35:41
| 12:35:41 |
| Attributes by
|
|
|
|
|
|
| CPLSUP3\
|
|
|
|
|
|
| Administrator on |
|
|
|
|
|
| jvoli/secret.txt |
|-------------|----------|------------|-----------|--------|-------------------|
| 5184
| 117000004| 08-Dec-14 | 08-Dec-14 | Info
| Successful Read
|
|
|
| 12:35:41
| 12:35:41 |
| by CPLSUP3\
|
|
|
|
|
|
| Administrator on |
|
|
|
|
|
| jvoli/secret.txt |
.-------------|----------|------------|-----------|--------|-------------------|
...[snip]...

52

CLI Commands

events auditing summary-list
Display a list of system-consolidated events.

Format
events auditing summary-list

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

-Severity 

Filter according to severity of
events

-Period 

Filter according to period of the
events

-HeadlineSubText


Filter according to headline sub
text

Example
Display a current list of the system-consolidated events:
CLI> events auditing summary-list

events system list
Display a list of the system (non-security) events.

Format
events list

Options
Option

Description

Format

--CSV

Displays the command output in a
comma-delimited format with a
header

Append --CSV to the
command

--Severity 

Filter according to the severity of the
events

--Period 

Filter according to the period of the
events

CLI Commands

53

Option

Description

--ConsolidatedEventID


Enter this option to get occurrences
of consolidated events

--HeadlineSubText


Filter according to headline sub text.

Format

Example
Display a current list of the events:
CLI> events system list

Output
.-----------.-----------.------------.----------.-------------.-------------.
| Unique ID | Event ID | Event Time | Severity | Workspace
| Headline
|
|-----------|-----------|------------|----------|-------------|-------------|
| 1975780
| 114000003 | 30-Jul-14 | Info
| System
| Fluid FS
|
|
|
| 12:05:06
|
|
| Health Scan |
|
|
|
|
|
| finished a |
|
|
|
|
|
| scanning
|
|
|
|
|
|
| cycle.
|
|-----------|-----------|------------|----------|-------------|-------------|
| 1975784
| 115000112 | 30-Jul-14 | Info
| System
| The user
|
|
|
| 12:35:41
|
|
| Administrat |
|
|
|
|
|
| or has
|
|
|
|
|
|
| successfull |
|
|
|
|
|
| y added new |
|
|
|
|
|
| Local User |
|
|
|
|
|
| 'user1' to |
|
|
|
|
|
| cluster
|
|
|
|
|
|
| repository |
|-----------|-----------|------------|----------|-------------|-------------|
...[snip]...

events system summary-list
Display a list of system-consolidated events.

Format
events system summary-list

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

-Severity 

Filter according to severity of
events

54

CLI Commands

Option

Description

-Period 

Filter according to period of the
events

-HeadlineSubText


Filter according to headline sub
text

Format

Example
Display a current list of the system— consolidated events:
CLI> events system summary-list

Output
.----------.----------.-----------.---------.-----------.-------------------.
| Unique ID| Event ID | Event Time| Severity| Workspace | Headline
|
|----------|----------|-----------|---------|-----------|-------------------|
| 5188
| 117000001| 08-Dec-14 | Info
| SACL Audit| Successful Write |
|
|
| 12:05:06 |
|
| by CPLSUP3\
|
|
|
|
|
|
| Administrator on |
|
|
|
|
|
| jvoli/secret.txt |
|----------|----------|-----------|---------|-----------|-------------------|
| 5189
| 117000004| 08-Dec-14 | Info
| SACL Audit| Successful Read
|
|
|
| 12:35:41 |
|
| Attributes by
|
|
|
|
|
|
| CPLSUP3\
|
|
|
|
|
|
| Administrator on |
|
|
|
|
|
| jvoli/secret.txt |
|----------|----------|-----------|---------|-----------|-------------------|
| 5184
| 117000004| 08-Dec-14 | Info
| SACL Audit| Successful Read
|
|
|
| 12:35:41 |
|
| by CPLSUP3\
|
|
|
|
|
|
| Administrator on |
|
|
|
|
|
| jvoli/secret.txt |
.----------|----------|-----------|---------|-----------|-------------------|
...[snip]...

events system view
Display the details of a single event.

Format
events system view 

Arguments
Argument

Description

Format



Unique ID of the event

Existing event ID

Example
Display the details of event 1975784:
CLI> events system view 1975784

CLI Commands

55

Output
Event ID
Event Time
Severity
Workspace
Headline
'user1' to
Text

= 115000112
= 30-Jul-14 12:35:41
= Info
= System
= The user Administrator has successfully added new Local User
cluster repository
=
Description:
The user Administrator has successfully added new Local
'user1' to cluster repository

User

hardware destroy-cluster destroy-and-change-model
Destroy the FluidFS cluster and change the model code.
CAUTION: This command should be used only by Dell Technical Support. Misuse of this
command can damage the FluidFS cluster and/or its data.
NOTE: Before destroying the cluster, change the FluidFS cluster operation mode to No Service
using the command system internal file-system service-mode set.

Format
hardware destroy-cluster destroy-and-change-model 

Arguments
Arguments

Description

Model

The model to be changed to

Format

Example
Destroy the FluidFS cluster and change model to fs8610:
CLI> hardware destroy-cluster destroy-and-change-model FS8610

hardware fabrics add
Add a fabric to the cluster.

Format
hardware fabrics add   {options}

Arguments
Argument

Description



Name of the new fabric



Netmask of the new fabric

56

Format

IP address in IPv6 or IPv4 format

CLI Commands

Options
Option

Description

-SanVIP 

San VIP which will be used to
communicate with the cluster

Format

Example
Add a fabric named FAB1 on the eth30 interface where the netmask is 255.255.255.0:
CLI> hardware fabrics add FAB1 eth30 255.255.0.0

hardware fabrics fc list
Display a list of the Fibre Channel fabrics.
NOTE: This command is available only on 10GbE iSCSI FS8600 appliances.

Format
hardware fabrics fc list

Example
Display a current list of the Fibre Channel fabrics:
CLI> hardware fabrics fc list

Output
.------.-----------.
| Name | Interface |
|------|-----------|
| SANa | hba0
|
|------|-----------|
| SANb | hba1
|
'------'-----------'

hardware fabrics fc view
Display details of a Fibre Channel fabric.
NOTE: This command is available only on Fibre Channel with 1GbE or 10GbE FS8600 appliances.

Format
hardware fabrics fc view 

CLI Commands

57

Arguments
Argument

Description

Format



Name of the Fibre Channel fabric Existing Fibre Channel fabric
name

Example
Display details of a Fibre Channel fabric named SANa:
CLI> hardware fabrics fc view SANa

Output
Name
= SANa
Interface = hba0

hardware fabrics iSCSI add
Add an iSCSI fabric.
NOTE: This command is available only on 10GbE iSCSI FS8600 appliances.

Format
hardware fabrics iSCSI add  
 {options}

Arguments
Argument

Description

Format



Interface of the new iSCSI fabric

Ethernet interface in the
following format: ethXX (for
example, eth30)



Netmask of the new iSCSI fabric

IP address in x.x.x.x format



NAS controller IP addresses

Comma-separated list of IP
addresses in x.x.x.x format

Option

Description

Format

-VLANTag 

VLAN ID of the fabric

Whole positive number (1 to
4094)

Options

58

CLI Commands

Example
Add an iSCSI fabric on the eth30 interface where the netmask is 255.255.255.0 and the NAS controller IP
addresses are 192.11.18.10 and 192.11.18.11:
CLI> hardware fabrics iSCSI add eth30 255.255.0.0 192.11.18.10,192.11.18.11

hardware fabrics iSCSI delete
Delete the iSCSI fabric.
NOTE: This command is available only on 10GbE iSCSI FS8600 appliances.

Format
hardware fabrics iSCSI delete 

Arguments
Argument

Description

Format



Name of the iSCSI fabric

Existing iSCSI fabric name

Example
Delete an iSCSI fabric named SANb:
CLI> hardware fabrics iSCSI delete SANb

hardware fabrics iSCSI edit
Modify settings of an iSCSI fabric.
NOTE: This command is available only on 10GbE iSCSI FS8600 appliances.

Format
hardware fabrics iSCSI edit  {options}

Arguments
Argument

Description

Format



Name of the iSCSI fabric

Existing iSCSI fabric name

CLI Commands

59

Options
Option

Description

Format

-VLANTag 

VLAN ID of the fabric

Whole positive number (1 to
4094)

-Netmask 

Netmask of the iSCSI fabric

IP address in x.x.x.x format

-ControllersIPs 

NAS controller IP addresses

Comma-separated list of IP
addresses in x.x.x.x format

Example
For an iSCSI fabric named SANb, change the NAS controller IP addresses to 192.11.18.14 and 192.11.18.15:
CLI> hardware fabrics iscsi edit SANb -ControllersIPs 192.11.18.14,192.11.18.15

hardware fabrics iSCSI list
Display a list of iSCSI fabrics.
NOTE: This command is available only on 10GbE iSCSI FS8600 appliances.

Format
hardware fabrics iSCSI list

Example
Display a current list of iSCSI fabrics:
CLI> hardware fabrics iSCSI list

Output
.------.-----------.----------.-----------------.----------------------------.
| Name | Interface | VLAN Tag | Netmask
| ControllersIps
|
|------|-----------|----------|-----------------|----------------------------|
| SAN | eth30
| 3436
| 255.255.255.192 | 172.22.153.160,
|
|
|
|
|
| 172.22.153.161
|
|------|-----------|----------|-----------------|----------------------------|
| SANb | eth31
| 3536
| 255.255.255.192 | 172.22.153.210,
|
|
|
|
|
| 172.22.153.211
|
'------'-----------'----------'-----------------'----------------------------'

hardware fabrics iSCSI-portals add-IPv4
Add an IPv4 address to storage iSCSI portals.
NOTE: This command is available only on 10GbE iSCSI FS8600 appliances.

60

CLI Commands

Format
hardware fabrics iSCSI-portals add-IPv4  

Arguments
Argument

Description

Format



IPv4 address of the iSCSI storage

IP address in IPv4 format



Description for the IPv4 address
of the iSCSI storage

Any string

Example
Add the IPv4 address 172.22.158.167 to storage iSCSI portals with PortIP_172.22.158.167 and a
description:
CLI> hardware fabrics iSCSI-portals add-IPv4 172.22.158.167 port_172.22.158.167

hardware fabrics iSCSI-portals delete-IPv4
Delete an IPv4 address from the storage iSCSI portals.
NOTE: This command is available only on 10GbE iSCSI FS8600 appliances.

Format
hardware fabrics iSCSI-portals delete-IPv4 

Arguments
Argument

Description

Format



IPv4 address of the iSCSI storage

Existing IPv4 address of the iSCSI
storage

Example
Delete the IPv4 address 172.22.158.167 from the storage iSCSI portals:
CLI> hardware fabrics iSCSI-portals delete-IPv4 172.22.158.167

hardware fabrics iSCSI-portals disable-authentication
Disable authentication to storage iSCSI portals.
NOTE: This command is available only on 10GbE iSCSI FS8600 appliances.

Format
hardware fabrics iSCSI-portals disable-authentication

CLI Commands

61

hardware fabrics iSCSI-portals enable-authentication
Enable authentication to storage iSCSI portals.
NOTE: This command is available only on 10GbE iSCSI FS8600 appliances.

Format
hardware fabrics iSCSI-portals enable-authentication  {options}

Arguments
Argument

Description

Format



User name that will be used for
the authentication with storage
iSCSI portals

Existing iSCSI user name

Option

Description

Format

-Password 

Password of the user name that
Existing iSCSI password
will be used for the
authentication with storage iSCSI
portals

Options

Example
Enable authentication to storage iSCSI portals using an account with the username user and the
password Password123:
CLI> hardware fabrics iSCSI-portals enable-authentication user -Password
Password123

hardware fabrics iSCSI-portals rediscover-all
Rediscover storage iSCSI portals.
NOTE: This command is available only on 10GbE iSCSI FS8600 appliances.

Format
hardware fabrics iSCSI-portals rediscover-all

hardware fabrics iSCSI-portals view
Display the settings of iSCSI portals.
NOTE: This command is available only on 10GbE iSCSI FS8600 appliances.

62

CLI Commands

Format
hardware fabrics iSCSI-portals view

Example
Display the current settings of iSCSI portals:
CLI> hardware fabrics iSCSI-portals view

Output
Use Authentication = No
Username
=
IscsiPortals
= .----------------.---------------------.
| IP
| Description
|
|----------------|---------------------|
| 172.22.158.167 | port_172.22.158.167 |
|----------------|---------------------|
| 172.22.158.166 | port_172.22.158.166 |
|----------------|---------------------|
| 172.22.158.178 | port_172.22.158.178 |
'----------------'---------------------'

hardware fabrics iSCSI view
Display settings of an iSCSI fabric.
NOTE: This command is available only on 10GbE iSCSI FS8600 appliances.

Format
hardware fabrics iSCSI view 

Arguments
Argument

Description

Format



Name of the iSCSI fabric

Existing iSCSI fabric name

Example
Display the settings of an iSCSI fabric named SANb:
CLI> hardware fabrics iSCSI view SANb

Output
Name
Interface
VLAN Tag
Netmask
ControllersIps

CLI Commands

=
=
=
=
=

SANb
eth31
3536
255.255.255.192
172.22.153.210,172.22.153.211

63

hardware fabrics status-list
Display a list of fabrics and their connectivity status to the storage.
NOTE: This command is available only on 10GbE iSCSI FS8600i appliances.

Format
hardware fabrics status-list

Example
Display a current list of fabrics and their connectivity status to the storage:
CLI> hardware fabrics status-list

Output
+--[SAN]
| |- Overall Connectivity Status = Accessible
| '- DetailedConnectivityStatus =
.-----------.----------.-----------.---------.
| | Controller| IP
| Descripti | Status |
| |
ID
|
| on
|
|
| |-----------|----------|-----------|---------|
| | 0
| 172.22.15| 69125.576 | Accessib|
| |
| 3.179
| 483958872 | le
|
| |
|
| 4868401.4 |
|
| |
|
| 6
|
|
| |-----------|----------|-----------|---------|
| | 1
| 172.22.15| 69125.576 | Accessib|
| |
| 3.179
| 483958872 | le
|
| |
|
| 4868401.4 |
|
| |
|
| 6
|
|
| '-----------'----------'-----------'---------'
'--[SANb]
|- Overall Connectivity Status = Accessible
'- DetailedConnectivityStatus =
.-----------.----------.-----------.---------.
| Controller| IP
| Descripti | Status |
|
ID
|
| on
|
|
|-----------|----------|-----------|---------|
| 0
| 172.22.15| 69125.576 | Accessib|
|
| 3.229
| 483958872 | le
|
|
|
| 4868414.6 |
|
|
|
| 0
|
|
|-----------|----------|-----------|---------|
| 1
| 172.22.15| 69125.576 | Accessib|
|
| 3.229
| 483958872 | le
|
|
|
| 4868414.6 |
|
|
|
| 0
|
|
'-----------'----------'-----------'---------'

64

CLI Commands

hardware NAS-appliances add-appliance
Add a NAS appliance.
NOTE: The NAS controllers in the new NAS appliance must be in standby mode and powered on. A
NAS controller is on and in standby mode if the power LED is flashing green at around 2 flashes per
second.

Format
hardware NAS-appliances add-appliance 

Arguments
Argument

Description

Format



Service tag of the NAS appliance

Existing service tag of additional
NAS appliance

Example
Add a NAS appliance with the service tag 17XZQQ2 to an existing FluidFS cluster:
CLI> hardware NAS-appliances add-appliance 17XZQQ2

hardware NAS-appliances attach-controller
Attach a NAS controller.
NOTE: The NAS controller must have a controller detached. NAS appliance IDs are numbered
starting from 1, whereas NAS controller IDs are numbered starting from 0.

Format
hardware NAS-appliances attach-controller 


Arguments
Argument

Description

Format



NAS appliance ID

Existing NAS appliance ID



NAS controller ID

NAS controller ID to attach

Example
Attach a NAS controller where the NAS appliance ID is 1 and the NAS controller ID is 0:
CLI> hardware NAS-appliances attach-controller 1 0

CLI Commands

65

hardware NAS-appliances blink-appliance
Update the blinking status of a NAS appliance.

Format
hardware NAS-appliances blink-appliance  


Arguments
Argument

Description

Format



ID of the NAS appliance

Existing NAS appliance ID



Indicate whether the first NAS
controller of the NAS appliance
should blink

Possible values are Yes, No



Indicate whether the second NAS Possible values are Yes, No
controller of the NAS appliance
should blink

Example
Make the first NAS controller blink in a NAS appliance with the ID 1:
CLI> hardware NAS-appliances blink-appliance 1 Yes No

hardware NAS-appliances create-cluster
Create a FluidFS cluster.
NOTE: The NAS controllers must be in standby mode and powered on. A NAS controller is on and in
standby mode if the power LED is flashing green at around 2 flashes per second.

Format
hardware NAS-appliances create-cluster {options}

Options
Option

Description

Format

-AdditionalNASAppliances


Service tags of additional NAS
appliances

Comma-separated list of existing
service tags for additional NAS
appliances

-CurrentApplianceServiceTag


Service tag of current NAS
appliance

Existing service tag of NAS
appliance

-SingleController


Create FluidFS cluster with a
single controller

66

CLI Commands

Example
Create a FluidFS cluster:
CLI> hardware NAS-appliances create-cluster SingleController

hardware NAS-appliances delete
Delete an unjoined NAS appliance.

Format
hardware NAS-appliances delete 

Arguments
Argument

Description

Format



NAS appliance ID

Existing NAS appliance ID

Example
Delete an unjoined NAS appliance with the ID 2:
CLI> hardware NAS-appliances delete 2

hardware NAS-appliances detach-controller
Detach a NAS controller.
NOTE: NAS appliance IDs are numbered starting from 1, whereas NAS controller IDs are numbered
starting from 0.

Format
hardware NAS-appliances detach-controller  

Arguments
Argument

Description

Format



NAS appliance ID

Existing NAS appliance ID



NAS controller ID

NAS controller ID

Example
Detach a NAS controller where the NAS appliance ID is 1 and the NAS controller ID is 0:
CLI> hardware NAS-appliances detach-controller 1 0

CLI Commands

67

hardware NAS-appliances discovery list
Display a list of discovered NAS appliances.

Format
hardware NAS-appliances discovery list

Example
Display a current list of discovered, undeployed NAS appliances:
CLI> hardware NAS-appliances discovery list

Output
.-----------------------.---------------------------------------------------.
| Appliance Service Tag | Controllers
|
|-----------------------|---------------------------------------------------|
| 7DSS3V1
| .--------.----------.--------------------------. |
|
| | Model | Version | Address
| |
|
| |--------|----------|--------------------------| |
|
| | FS8610i| 3.0.7440 | fe80::a236:9fff:fe03:134 | |
|
| |
|
| e
| |
|
| |--------|----------|--------------------------| |
|
| | FS8610i| 3.0.7440 | fe80::a236:9fff:fe03:149 | |
|
| |
|
| 2
| |
|
| '--------'----------'--------------------------' |
'-----------------------'---------------------------------------------------'

hardware NAS-appliances discovery view
Display details of a discovered NAS appliance.

Format
hardware NAS-appliances discovery view 

Arguments
Argument

Description

Format



NAS appliance service tag

Existing NAS appliance service
Ttag

Example
Display details of a discovered, undeployed NAS appliance with the service tag 7DSS3V1:
CLI> hardware NAS-appliances discovery view 7DSS3V1

68

CLI Commands

Output
Appliance S = 7DSS3V1
Controllers = +--+- Address
| |- Slot
| |- ServiceTag
| |- Version
| |- Model
| |- Controller ID
| |- Is Clean
| '- AllIPv6Addresses
|
'--+- Address
|- Slot
|- ServiceTag
|- Version
|- Model
|- Controller ID
|- Is Clean
'- AllIPv6Addresses

=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=

fe80::a236:9fff:fe03:134e
1
8DSS3V1
4.0.002838
FS8610i
7DSS3V1-1
Yes
fe80::a236:9fff:fe03:134e,
fe80::a236:9fff:fe03:134c
fe80::a236:9fff:fe03:1492
2
9DSS3V1
4.0.002838
FS8610i
7DSS3V1-2
Yes
fe80::a236:9fff:fe03:1492,
fe80::a236:9fff:fe03:1490

hardware NAS-appliances join-appliance
Join a NAS appliance.

Format
hardware NAS-appliances join-appliance 

Arguments
Argument

Description

Format



NAS appliance ID

Existing NAS appliance ID

Example
Join a NAS appliance with the ID 2:
CLI> hardware NAS-appliances join-appliance 2

hardware NAS-appliances list
Display a list of NAS appliances.

Format
hardware NAS-appliances list

Example
Display a current list of NAS appliances:
CLI> hardware NAS-appliances list

CLI Commands

69

Output
.--------------.-------------------.-------------------.--------------------.
| Appliance ID | Appliance Service | Is File System
| Controllers
|
|
| Tag
| Member
|
|
|--------------|-------------------|-------------------|--------------------|
| 1
| 17XZSW1
| Yes
| .------.-------. |
|
|
|
| | Cont | Clust | |
|
|
|
| | roll | er
| |
|
|
|
| | ers | Membe | |
|
|
|
| | ID
| r
| |
|
|
|
| |------|-------| |
|
|
|
| | 0
| Yes
| |
|
|
|
| |------|-------| |
|
|
|
| | 1
| Yes
| |
|
|
|
| '------'-------' |
'--------------'-------------------'------------------'--------------------'

hardware NAS-appliances reboot-controller
Reboot a single NAS controller.

Format
hardware NAS-appliances reboot-controller 

Arguments
Argument

Description

Format



NAS controller ID

Existing NAS controller ID

Example
Reboot a NAS controller with the ID 0:
CLI> hardware NAS-appliances reboot-controller 0

hardware restore-configuration-from-storage list-lostvolumes
Display a list of lost NAS volumes.
When restoring the configuration from storage, a gap between the state of the file system and the
configuration information could exist. This command can help find this situation.
CAUTION: This command should be used only by Dell Technical Support. This command is used
as part of a disaster recovery scenario.

Format
hardware restore-configuration-from-storage list-lost-volumes

70

CLI Commands

Options
Option

Description

Format

‐‐CSV

Displays the command output in Append ‐‐CSV to the command
a comma‐delimited format with a
header

Example
Display a list of lost NAS volumes:
CLI> hardware restore-configuration-from-storage list-lost-volumes

Output
.------.----------.
| Name | Size
|
|------|----------|
| vol1 | 80.00MB |
'------'----------'

hardware restore-configuration-from-storage restoreconfiguration
Restore the configuration from the storage.
CAUTION: This command should be used only by Dell Technical Support. This command is used
as part of a disaster recovery scenario.

Format
hardware restore-configuration-from-storage restore

hardware restore-configuration-from-storage restorelost-volumes
Restore lost NAS volumes.
When restoring the configuration from storage, a gap between the state of the file system and the
configuration information could exist. This command can help find and correct this situation.
CAUTION: This command should be used only by Dell Technical Support. This command is used
as part of a disaster recovery scenario.

Format
hardware restore-configuration-from-storage restore-lost-volumes

CLI Commands

71

Example
Restore lost NAS volumes:
CLI> hardware restore-configuration-from-storage restore-lost-volumes

hardware restore-configuration-from-storage restoreNAS-volumes
Restore NAS volumes from the storage.
CAUTION: This command should be used only by Dell Technical Support. This command is used
as part of a disaster recovery scenario.

Format
hardware restore-configuration-from-storage restore-NAS-volumes

hardware restore-configuration-from-storage restoreNAS-volumes
Restore NAS volumes from the storage.
CAUTION: This command should be used only by Dell Technical Support. This command is used
as part of a disaster recovery scenario.

Format
hardware restore-configuration-from-storage restore-NAS-volumes

Example
Restore NAS volumes from the storage:
CLI> hardware restore-configuration-from-storage restore-NAS-volumes

hardware storage-identifiers list
Display a list of the storage identifiers.

Format
hardware storage-identifiers list

Options
Option

Description

--CSV

Display the command output in a Append --CSV to the command
comma-delimited format with a
header

72

Format

CLI Commands

Example
Display a list of the current storage identifiers:
CLI> hardware storage-identifiers list

Output
.------------------.----------------------.
| Identifier
| Description
|
|------------------|----------------------|
| 21000024ff4f92e8 | Controller0 hba0 WWN |
|------------------|----------------------|
| 21000024ff4f92e9 | Controller0 hba1 WWN |
|------------------|----------------------|
| 21000024ff4f9318 | Controller1 hba0 WWN |
|------------------|----------------------|
| 21000024ff4f9319 | Controller1 hba1 WWN |
'------------------'----------------------'

hardware storage-identifiers view
Display information about a storage identifier.

Format
hardware storage-identifiers view 

Arguments
Argument

Description

Format



Storage identifier

Existing storage identifier

Example
Display information about the storage identifier 21000024ff4f92e8:
CLI> hardware storage-identifiers view 21000024ff4f92e8

Output
Identifier = 21000024ff4f92e8
Description = Controller0 hba0 WWN

hardware storage-subsystem create-NAS-pool
Create the NAS pool.

Format
hardware storage-subsystem create-NAS-pool

CLI Commands

73

hardware storage-subsystem expand-NAS-pool
Expand the NAS pool.

Format
hardware storage-subsystem expand-NAS-pool

hardware storage-subsystem file-system-configuration
edit
Modify the file system storage configuration.

Format
hardware storage-subsystem file-system-configuration edit

Arguments
Argument

Description

Format

-UnmapEnabled


When releasing space in NAS
volumes and NAS pool, make
that space available for block
volumes, using the SCSI TRIM
command.

Values are Yes or No

hardware storage-subsystem file-system-configuration
view
Display the file system storage configuration.

Format
hardware storage-subsystem file-system-configuration view

Example
Display the file system storage configuration.:
CLI> hardware storage-subsystem file-system-configuration view

Output
Unmap Enabled = No

74

CLI Commands

hardware storage-subsystem rescan
Trigger LUN discovery.

Format
hardware storage-subsystem rescan

hardware storage-subsystem view
Display the storage subsystem status.

Format
hardware storage-subsystem view

Example
Display the current storage subsystem status:
CLI> hardware storage-subsystem view

Output
'--+- Name
= Storage
|- Luns Accessibility = Optimal
'- Luns
= +--+- ID
| |- LUN Number
| |- Reserved Size
| |- Real Size
| |- Status
| |- Accessibility
| |- Array Type
| '- Controllers
|
|
|
|
|
|
...[snip]...

=
=
=
=
=
=
=
=

36000d31000fad80000000017
0
524288
524288
Formatted
Optimal
MD36XXI
.----.------------------.
| ID| LUN Accessibility |
|----|------------------|
| 0 | Optimal
|
|----|------------------|
| 1 | Optimal
|
'----'------------------'

NAS-volumes add
Add a NAS volume.

Format
NAS-volumes add   {options}

CLI Commands

75

Arguments
Argument

Description

Format



NAS volume name

Must have a maximum length of
230 characters, and may contain
letters, numbers, spaces, and
underscores. Control characters
and commas are not allowed.



NAS volume size

Floating point number with suffix
of units (MB, GB, or TB) (for
example, 100MB)

Option

Description

Format

-Administrator 

Administrator of the NAS volume

Existing administrator user name

-ReservedSpace


Reserved space from the NAS
volume

Floating point number

-EnableUsedSpaceThreshold


Indicate whether the used space
threshold is enabled

Possible values are Yes, No

-UsedSpaceThreshold


Used space threshold (percent
from the NAS volume size)

Zero-based, whole positive
number (0 to 100)

-EnableAvailableSpaceThreshold


Indicate whether the unused
space threshold is enabled

Possible values are Yes, No

-AvailableSpaceThreshold


Unused space threshold

Floating point number with suffix
of units (for example, 100MB)

-EnableDataReduction


Indicate whether data reduction
is enabled

Possible values are Yes, No

-DataReductionType


Data reduction type

Possible values are
De‑duplication,
De‑duplicationWithCompression

-RehydrateOnRead


Indicate whether the system
should save the rehydrate files
during the read when data
reduction is disabled

Possible values are Yes, No

Options

Threshold of access time
DataReductionFilesFilterAccessTi
me


Whole positive number (in days)
greater than or equal to 30

Threshold of modify time
DataReductionFilesFilterModificat

Whole positive number (in days)
greater than or equal to 30

76

CLI Commands

Option

Description

Format

-DataReductionFilesFilterType


Indicate whether the files should
pass to deduplication
immediately or according to
defined filters

Possible values are AllFiles,
AgeBased

-AccessTimeGranularity


Granularity of access time
updates

Possible values are Always, Daily,
Never, Every5Minutes, EveryHour

ionTime


Indicate whether the snapshot
EnableSnapshotSpaceConsumpti space consumption threshold is
onThreshold
enabled


Possible values are Yes, No

Snapshot space consumption
SnapshotSpaceConsumptionThre threshold (percent from the NAS
shold
volume size)


Zero-based, whole positive
number (0 to 100)

-SecurityStyle 

Interoperability policy

Possible values are Mixed, NTFS,
UNIX

-DefaultUNIXFilePermissions


Default UNIX file permissions for UNIX permission (rwxrwxrwx) in
files that will be created from
octal format
Windows on a NAS volume with a
UNIX interoperability policy

-DefaultUNIXFolderPermissions
Default UNIX file permissions for UNIX permission (rwxrwxrwx) in
 folders that will be created from octal format
Windows on a NAS volume with a
UNIX interoperability policy
-ReportZeroDiskUsage


Indicate whether the disk usage
Possible values are Yes, No
for files that do not have a valid
disk usage count will be reported
as zero

—SACLAuditPolicy


SACL auditing policy

Example
Add an NTFS NAS volume named vol3 with a size of 20 MB and enable an alert that is triggered when 95%
of the NAS volume space is used:
CLI> NAS-volumes add vol3 20MB -SecurityStyle NTFS -EnableUsedSpaceThreshold
Yes -UsedSpaceThreshold 95

CLI Commands

77

NAS-volumes view
Display NAS volume settings.

Format
NAS-volumes view 

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

Example
Display the current settings for a NAS volume named vol3:
CLI> NAS-volumes view vol3

Output
Name
Administrator
Size
Used Space
Is Used Space Threshold Enabled
Used Space Threshold
Unused Space
Is Unused Space Threshold Enabled
Unused Space Threshold
Over Committed Space
Space Provisioning
Unused Reserved Space
Reserved Space
Clone
Data Reduction Enabled
Data Reduction Type
Data Reduction Rehydrate On Read
Data Reduction Savings
Data Reduction Savings Percent
Data Reduction Files Filter Access Time
Data Reduction Files Filter Modification Time
Data Reduction Files Filter Type
Number Of Snapshots
Snapshot Used Space
Access Time Granularity
Enable Snapshot Space Consumption Threshold
Snapshot Space Consumption Threshold
Security Style
Default UNIX File Permissions
Default UNIX Folder Permissions
Number Of Nfs Exports
Number Of SMB Shares
Report Zero Disk Usage
SACL Audit Policy
Limit access to specified subnets
Access allowed only from subnets

78

=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=

vol3
20.00 MB
0.01 MB
Yes
95%
19.99 MB
No
20.00 MB
0.00 MB
Thin
0.00 MB
0.00 MB
No
No
De-duplication
No
0.00 MB
0%
30
30
AgeBased
0
0.00 MB
Daily
No
100
NTFS
0744
0755
0
0
No
None
No
.------------.

CLI Commands

| Network ID |
|------------|
'------------'
Inode Distribution
= No
Keep redundant copy of metadata for improved resiliency = Yes

NAS-volumes auditing-policy add
Add an auditing policy for a volume.

Format
NAS-volumes auditing-policy add   
 -Enable

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Name of the auditing policy

Existing policy name



ID for the auditing cluster

Existing cluster ID



List of one or more file-access
operations

Possible values are
CREATE_NEW, WRITE, READ,
RENAME, SET_OWNER,
SET_ATTRIBUTES, DELETE,
OPEN_FOLDER,
CHANGE_SECURITY, LINK

Option

Description

Format

-Enable

Indicate whether the auditing
policy is enabled or disabled for
the volume

Possible values are Yes, No.

Options

Example
Add an auditing policy for a NAS volume:
CLI> NAS-volumes auditing-policy add vol1 policy1 NASCluster1
WRITE,READ,SET_ATTRIBUTES,DELETE -Enable Yes

NAS-volumes auditing-policy delete
Delete an auditing policy for a volume.

Format
NAS-volumes auditing-policy delete   

CLI Commands

79

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Name of the auditing policy

Existing policy name



Cluster ID for the auditing server

Existing cluster ID

Example
Delete an auditing policy from a NAS volume:
CLI> NAS-volumes auditing-policy delete vol1 policy1 NASCluster1

NAS-volumes auditing-policy edit
Modify an auditing policy for a volume.
You can change subscriber ID and the file-access operations listed in the policy.

Format
NAS-volumes auditing-policy edit   
 -Enable

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Name of the auditing policy

Existing policy name



Cluster ID for the auditing server

New cluster ID



List of one or more file-access
operations to modify

Possible values are
CREATE_NEW, WRITE, READ,
RENAME, SET_OWNER,
SET_ATTRIBUTES, DELETE,
OPEN_FOLDER,
CHANGE_SECURITY, LINK

Option

Description

Format

-Enable

Indicate whether the auditing
policy is enabled or disabled for
the volume

Possible values are Yes, No.
[Default is Yes?]

Options

80

CLI Commands

Example
Modify an auditing policy for a NAS volume:
CLI> NAS-volumes auditing-policy edit vol1 policy1 NASCluster1
WRITE,READ,SET_ATTRIBUTES,RENAME -Enable Yes

NAS-volumes auditing-policy list
Display a list of existing auditing policies.

Format
NAS-volumes auditing-policy list

Example
Display a list of existing auditing policies:
CLI> NAS-volumes auditing-policy list

Output
SubscriberID
= Cluster ID of the auditing server
Enable
= Whether policy is enabled or disabled
OperationsList = List of one or more file-access operations for the policy

NAS-volumes configuration-backups list-available
Display a list of available NAS volume configuration backups.
Backups will be available only if they are from another NAS volume, which happens as a result of
replication (Tthe .clusterConfig directory is copied as part of replication data), an NDMP restore of
another NAS volume (the .clusterConfig directory is backed up from one NAS volume and restored to
another), or a manual copy of the .clusterConfig directory from another NAS volume.

Format
NAS-volumes configuration-backups list-available

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display a current list of NAS volume configuration backups:
CLI> NAS-volumes configuration-backups list-available

CLI Commands

81

Output
.-------------------.------------------.------------------.-----------------.
| Volume Name
| Source Cluster
| Source Volume
| Backup Time
|
|
| Name
| Name
|
|
|-------------------|------------------|------------------|-----------------|
| Vol1
| idffs2
| VolA
| 02-Aug-13
|
|
|
|
| 14:30:28
|
|-------------------|------------------|------------------|-----------------|
| Vol2
| idffs2
| VolB
| 31-Jul-13
|
|
|
|
| 16:21:38
|
'-------------------'------------------'------------------'-----------------'

NAS-volumes configuration-backups view-available
Description
Display available configuration backups for a NAS volume. Backups will be available only if they are from
another NAS volume, which happens as a result of replication (.clusterConfig directory is copied as part
of replication data), an NDMP restore of another NAS volume (.clusterConfig directory is backed up from
one NAS volume and restored to another), or a manual copy of the .clusterConfig directory from another
NAS volume.

Format
NAS-volumes configuration-backups view-available 

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

Example
Display the available configuration backups for a NAS volume named vol1:
CLI> NAS-volumes configuration-backups view-available
vol1

Output
Volume
Source
Source
Backup

82

Name
Cluster Name
Volume Name
Time

=
=
=
=

vol1
idffs2
VolA
31-Jul-13 16:21:38

CLI Commands

NAS-volumes configuration-backups restoreconfiguration
Restore NAS volume settings from another FluidFS cluster.

Format
NAS-volumes configuration-backups restore-configuration 


Arguments
Argument

Description

Format



Volume name

Existing NAS volume name



Configuration types that should
be restored

Comma-separated list of
configuration types. Possible
values are SMBshare, NfsExport,
QuotaRule, and
SnapshotSchedule.

Example
Restore snapshot schedule settings for a NAS volume named vol1:
CLI> NAS-volumes configuration-backups restore-configuration vol1
SnapshotSchedule

NAS-volumes clone file
Description
Create a clone of a file.
NOTE: The file must be at least 7 MB to be cloned.

Format
NAS-volumes clone file   


Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Source file path

Existing source file path



Destination directory path

Existing directory path

CLI Commands

83

Argument

Description

Format



Destination file name

Length must be less than 230
characters

Example
Clone a file on a NAS volume named vol1 from /folder/file.pdf to /folder/filecopy.pdf:
CLI> NAS-volumes clone file vol1 /folder/file.pdf /folder filecopy.pdf

NAS-volumes clone volume
Description
Clone a NAS volume.

Format
NAS-volumes clone volume   

Arguments
Argument

Description

Format



Cloned NAS volume name

Must have a maximum length of
230 characters, and may contain
letters, numbers, spaces, and
underscores. Control characters
and commas are not allowed.



Base NAS volume

Existing NAS volume name



Base snapshot

Existing snapshot name

Example
Create a clone NAS volume named clonevol3 from a NAS volume named vol3 and a snapshot named
vol3snap:
CLI> NAS-volumes clone volume clonevol3 vol3 vol3snap

NAS-volumes delete
Description
Delete a NAS volume.

Format
NAS-volumes delete 

84

CLI Commands

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

Example
Delete a NAS volume named vol3:
CLI> NAS-volumes delete vol3

Output
Confirmation: You are about to delete . All data stored on
the NAS volume will be lost.
Are you sure that you want to complete the operation? ( Yes / No ):

NAS-volumes edit advanced-settings
Modify the advanced settings of a NAS volume.

Format
NAS-volumes edit advanced-settings  {options}

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

Option

Description

Format



SACL auditing policy



Enable EagerInodeDistribution
will balance system for few
writers

-AccessTimeGranularity


Granularity of access time
updates

-ReportZeroDiskUsage


Indicate whether the disk usage
Possible values are Yes, No
for files that do not have a valid
disk usage count will be reported
as zero

-RestrictSnapshotsAccess


Enable/disable user’s access to
snapshots of a specific volume

Options

CLI Commands

Possible values are Always, Daily,
Never, Every5Minutes, EveryHour

Possible values are Yes, No

85

Example
Update access timestamps every hour for a NAS volume named vol1:
CLI> NAS-volumes edit advanced-settings vol1 -AccessTimeGranularity Everyhour

NAS-volumes edit data-reduction
Modify the data reduction settings of a NAS volume.

Format
NAS-volumes edit data-reduction  {options}

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

Option

Description

Format

-EnableDataReduction


Indicate whether data reduction
is enabled

Possible values are Yes, No

-DataReductionType


Data reduction type

Possible values are
De‑duplication,
De‑duplicationWithCompression

DataReductionFilesFilterAccessTi
me


Threshold of access time. If a file
was read in the last  days, it
will not be a candidate for data
reduction.

Whole positive number (in days)
greater than or equal to 5

DataReductionFilesFilterModificat
ionTime


Threshold of modify time. If a file Whole positive number (in days)
was modified or written in the
greater than or equal to 5
last  days, it will not be a
candidate for data reduction.

-DataReductionFilesFilterType


Indicate whether the files should
pass to deduplication
immediately or according to
defined filters

Possible values are AllFiles,
AgeBased

DataReductionRehydrateOnRead


Indicate whether the system
should save the rehydrate files
during the read when data
reduction is disabled

Possible values are Yes, No

Options

86

CLI Commands

Example
Enable data reduction on a NAS volume named vol1:
CLI> NAS-volumes edit data-reduction vol1 -EnableDataReduction Yes

NAS-volumes edit interoperability-policy
Modify the interoperability policy of a NAS volume.
If the interoperability policy is changed, it affects any new files or directories in the volume.

Format
NAS-volumes edit interoperability-policy  {options}

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

Option

Description

Format

-SecurityStyle 

Interoperability policy

Possible values are Mixed, NTFS,
UNIX

-DefaultUNIXFilePermissions


Default UNIX file permissions for UNIX permission (rwxrwxrwx) in
files that will be created from
octal format
Windows on a NAS volume with a
UNIX interoperability policy

Options

-DefaultUNIXFolderPermissions
Default UNIX file permissions for UNIX permission (rwxrwxrwx) in
 folders that will be created from octal format
Windows on a NAS volume with a
UNIX interoperability policy

Example
Change the security style of a NAS volume named vol1 to UNIX:
CLI> NAS-volumes edit interoperability-policy vol1 -SecurityStyle UNIX

NAS-volumes edit name
Description
Rename a NAS volume.

CLI Commands

87

Format
NAS-volumes edit name  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



New NAS volume name

Must have a maximum length of
230 characters, and may contain
letters, numbers, spaces, and
underscores. Control characters
and commas are not allowed.

Example
Rename a NAS volume from vol1 to vol2:
CLI> NAS-volumes edit name vol1 vol2

NAS-volumes edit owner
Modify the NAS volume owner.

Format
NAS-volumes edit owner  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Administrator of the NAS volume

Selected existing administrator
user name

Example
Change the owner of a NAS volume named vol1 to Administrator2:
CLI> NAS-volumes edit owner vol1 Administrator2

NAS-volumes edit space
Description
Modify the NAS volume space settings.

88

CLI Commands

Format
NAS-volumes edit space  {options}

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

Option

Description

Format

-Size 

NAS volume size

Floating point number with suffix
of units (MB, GB, or TB) (for
example, 100MB)

-SpaceProvisioning


Space provisioning type of the
NAS volume

Possible values are Thick, Thin

-ReservedSpace


Reserved space from the NAS
volume

Floating point number

-EnableUsedSpaceThreshold


Indicate whether the used space
threshold is enabled

Possible values are Yes, No

-UsedSpaceThreshold


Used space threshold (percent
from the NAS volume size)

Zero-based, whole positive
number (0 to 100)

-EnableAvailableSpaceThreshold


Indicate whether the unused
space threshold is enabled

Possible values are Yes, No

-AvailableSpaceThreshold


Unused space threshold

Floating point number with suffix
of units (for example, 100MB)

Options

Indicate whether the snapshot
EnableSnapshotSpaceConsumpti space consumption threshold is
onThreshold
enabled


Possible values are Yes, No

Snapshot space consumption
SnapshotSpaceConsumptionThre threshold (percent from the NAS
shold
volume size)


Zero-based, whole positive
number (0 to 100)

Example
Change the size of a NAS volume named vol1 to 50 MB:
CLI> NAS-volumes edit space vol1 -Size 50MB

CLI Commands

89

NAS-volumes edit subnet-restrictions add-allowedsubnets
Add allowed subnet to the NAS volume.

Format
NAS-volumes edit subnet-restrictions add-allowed-subnets  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Subnet network ID

Example
Add allowed subnet to NAS volume Vol2:
CLI> NAS-volumes edit subnet-restrictions add-allowed-subnets Vol2 192.168.0.0

NAS-volumes edit subnet-restrictions delete-allowedsubnets
Delete allowed subnet from the NAS volume.

Format
NAS-volumes edit subnet-restrictions delete-allowed-subnets  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Subnet network ID

Example
Delete allowed subnet from NAS volume Vol2:
CLI> NAS-volumes edit subnet-restrictions delete-allowed-subnets Vol2
192.168.0.0

90

CLI Commands

NAS-volumes edit subnet-restrictions limit-to-subnets
Enable or disable NAS volume access restriction for specified subnets.
NOTE: If home shares reside on the volume to be restricted, all users might lose access to their
home shares if they are not accessing it through this subnet.

Format
NAS-volumes edit edit subnet-restrictions limit-to-subnets 


Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Indicate if the limit to subnets
feature is enabled on the volume

Values are Yes and No

Example
Enable NAS volume access restriction for specified subnet:
CLI> NAS-volumes edit edit subnet-restrictions limit-to-subnets MyVolume Yes

NAS-volumes list capacity-over-time last-day
Display the last day’s NAS volumes statistics.

Format
NAS-volumes list capacity-over-time last-day 

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Options

CLI Commands

91

Example
Display the last day’s NAS volumes statistics for a NAS volume named vol3:
CLI> NAS-volumes list capacity-over-time last-day vol3

Output
.-------.----------.---------.--------.---------------.-----------------.--------------.
| Volume| Time
| Size
| Used
| Unused
| Unused Uneserved| Over
Committed|
| Name |
|
| Space | Reserved Space| Space
|
Space
|
|-------|----------|---------|--------|---------------|-----------------|--------------|
| vol3 | 09-Aug-14| 20.00 MB| 0.00 MB| 0.00 MB
| 19.00 MB
| 0.00
MB
|
|
| 13:23:02 |
|
|
|
|
|
|-------|----------|---------|--------|---------------|-----------------|--------------|
| vol3 | 09-Aug-14| 20.00 MB| 0.00 MB| 0.00 MB
| 19.00 MB
| 0.00
MB
|
|
| 12:00:00 |
|
|
|
|
|
|-------|----------|---------|--------|---------------|-----------------|--------------|
| vol3 | 09-Aug-14| 0.00 MB | 0.00 MB| 0.00 MB
| 0.00 MB
| 0.00
MB
|
|
|11:00:00 |
|
|
|
|
|
|-------|----------|---------|--------|---------------|-----------------|--------------|
...[snip]...

NAS-volumes list capacity-over-time last-month
Display the last month's NAS volumes statistics.

Format
NAS-volumes list capacity-over-time last-month 

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

92

CLI Commands

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the last month's NAS volumes statistics for a NAS volume named vol3:
CLI> NAS-volumes list capacity-over-time last-month vol3

Output
.-------.-----------.---------.----------.----------.-----------.--------------.
| Volume| Time
| Size
|Used Space| Unused
| Unused
| Over
Committed|
| Name |
|
|
| Reserved | Unreserved|
Space
|
|
|
|
|
| Space
| Space
|
|
|-------|-----------|---------|----------|----------|-----------|--------------|
| vol3 | 02-Aug-13 | 0.00 MB | 0.00 MB | 0.00 MB | 0.00 MB
| 0.00
Mb
|
|
| 00:00:00 |
|
|
|
|
|
|-------|-----------|---------|----------|----------|-----------|--------------|
| vol3 | 01-Aug-13 | 0.00 MB | 0.00 MB | 0.00 MB | 0.00 MB
| 0.00
MB
|
|
| 00:00:00 |
|
|
|
|
|
|-------|-----------|---------|----------|----------|-----------|--------------|
| vol3 | 31-Jul-13 | 0.00 MB | 0.00 MB | 0.00 MB | 0.00 MB
| 0.00
MB
|
|
| 00:00:00 |
|
|
|
|
|
|-------|-----------|---------|----------|----------|-----------|--------------|
...[snip]...

NAS-volumes list capacity-over-time last-week
Display the last week's NAS volumes statistics.

Format
NAS-volumes list capacity-over-time last-week 

CLI Commands

93

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Options

Example
Display the last week's NAS volumes statistics for a NAS volume named vol3:
CLI> NAS-volumes list capacity-over-time last-week vol3

Output
.------------.----------.--------.----------.---------.-----------.----------.
| Volume Name| Time
| Size
|Used Space| Unused | Unused
| Over
|
|
|
|
|
| Reserved| Unreserved| Committed|
|
|
|
|
| Space
| Space
| Space
|
|------------|----------|--------|----------|---------|-----------|----------|
| vol3
| 09-Aug-13| 0.00 MB| 0.00 MB | 0.00 MB | 0.00 MB
| 0.00 MB |
|
| 00:00:00 |
|
|
|
|
|
|------------|----------|--------|----------|---------|-----------|----------|
| vol3
| 08-Aug-13| 0.00 MB| 0.00 MB | 0.00 MB | 0.00 MB
| 0.00 MB |
|
| 18:00:00 |
|
|
|
|
|
|------------|----------|--------|----------|---------|-----------|----------|
| vol3
| 08-Aug-13| 0.00 MB| 0.00 MB | 0.00 MB | 0.00 MB
| 0.00 MB |
|
| 12:00:00 |
|
|
|
|
|
|------------|----------|--------|----------|---------|-----------|----------|
...[snip]...

NAS-volumes list capacity-over-time last-year
Display the last year’s NAS volumes statistics.

Format
NAS-volumes list capacity-over-time last-year 

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

94

CLI Commands

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the last year’s NAS volumes statistics for a NAS volume named vol3:
CLI> NAS-volumes list capacity-over-time last-year vol3

Output
.-----------.----------.---------.-----------.---------.----------.----------.
|Volume Name| Time
| Size
| Used Space| Unused | Unused
| Over
|
|
|
|
|
| Reserved| Uneserved| Committed|
|
|
|
|
| Space
| Space
| Space
|
|-----------|----------|---------|-----------|---------|----------|----------|
| vol3
| 09-Aug-14| 20.00 MB| 0.00 MB
| 0.00 MB | 19.00 MB | 0.00 MB |
|
| 13:31:27 |
|
|
|
|
|
|-----------|----------|---------|-----------|---------|----------|----------|
| vol3
| 26-Jul-14| 0.00 MB | 0.00 MB
| 0.00 MB | 0.00 MB | 0.00 MB |
|
| 00:00:00 |
|
|
|
|
|
|-----------|----------|---------|-----------|---------|----------|----------|
| vol3
| 12-Jul-14| 0.00 MB | 0.00 MB
| 0.00 MB | 0.00 MB | 0.00 MB |
|
| 00:00:00 |
|
|
|
|
|
|-----------|----------|---------|-----------|---------|----------|----------|
...[snip]...

NAS-volumes list capacity-over-time now
Display the current NAS volumes statistics.

Format
NAS-volumes list capacity-over-time now 

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Options

CLI Commands

95

Example
Display the current NAS volumes statistics for a NAS volume named vol3:
CLI> NAS-volumes list capacity-over-time now vol3

Output
.------------.----------.---------.---------.----------.----------.-------------.
| Volume Name| Time
| Size
|Used Space| Unused | Unused
|Over
Committed|
|
|
|
|
| Reserved| Uneserved|
Space
|
|
|
|
|
| Space | Space
|
|
|------------|----------|---------|----------|---------|----------|-------------|
| vol3
| 09-Aug-13| 20.00 MB| 0.00 MB | 0.00 MB | 19.00 MB | 0.00
MB
|
|
| 13:23:02 |
|
|
|
|
|
|------------|----------|---------|----------|---------|----------|-------------|
| vol3
| 09-Aug-13| 20.00 MB| 0.00 MB | 0.00 MB | 19.00 MB | 0.00
MB
|
|
| 12:00:00 |
|
|
|
|
|
|------------|----------|---------|----------|---------|----------|-------------|
| vol3
| 09-Aug-13| 0.00 MB | 0.00 MB | 0.00 MB | 0.00 MB | 0.00
MB
|
|
| 11:00:00 |
|
|
|
|
| |
|------------|----------|---------|----------|---------|----------|-------------|
...[snip]...

NAS-volumes list clones
Description
List cloned NAS volumes.

Format
NAS-volumes list clones

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

96

CLI Commands

Example
Display a list of cloned NAS volumes:
CLI> NAS-volumes list clones

Output
.--------------.-------------.--------------.-------------.
| Cloned Volume| Base Volume | Base Snapshot| Base Volume |
| Name
| Name
| Name
| Space Status|
|--------------|-------------|--------------|-------------|
| clonevol3
| vol3
| vol3snap
| Warning
|
'--------------'-------------'--------------'-------------'

NAS-volumes list data-reduction
List of NAS volumes with their data reduction information.

Format
NAS-volumes list data-reduction

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a list of the NAS volumes with their current data reduction information:
CLI> NAS-volumes list data-reduction

Output
.-------.---------------.-----------------.------------------.---------------.---------------.
| Name | Data Reduction| Data Reduction | Data Reduction
| Data Reduction|
Data Reduction |
|
| Enabled
| Type
| Rehydrate On Read| Savings
|
Savings Percent|
|-------|---------------|-----------------|------------------|---------------|---------------|
| smbvol| No
| De-duplication | No
| 0.00 MB
|
0%
|
|-------|---------------|-----------------|------------------|---------------|---------------|
| nfsvol| Yes
| De-duplication | No
| 0.00 MB
|
0%
|
|
|
| with compression|
|
|
|
|-------|---------------|-----------------|------------------|---------------|--

CLI Commands

97

--------------|
| svol3 | Yes
| De-duplication | No
| 0.00 MB
|
0%
|
|-------|---------------|-----------------|------------------|---------------|---------------|

NAS-volumes list snapshots
Description
List NAS volumes with their snapshot space consumption.

Format
NAS-volumes list snapshots

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a list of the NAS volumes with their current snapshot space consumption:
CLI> NAS-volumes list snapshots

Output
.------.---------------------.---------------------.
| Name | Number Of Snapshots | Snapshot Used Space |
|------|---------------------|---------------------|
| vol1 | 1
| 0.00 MB
|
|------|---------------------|---------------------|
| vol2 | 0
| 0.00 MB
|
'------'---------------------'---------------------'

NAS-volumes list space
List NAS volumes with their space information.

Format
NAS-volumes list space

98

CLI Commands

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display a list of the NAS volumes with their current space information:
CLI> NAS-volumes list space

Output
.-------.---------.----------.---------.--------------.-------------.---------------.------.
| Name | Size
|Used Space|Unused
| OverCommitted| Space
| Unused
Reserved| Clone|
|
|
|
| Space
| Space
| Provisioning|
Space
|
|
|-------|---------|----------|---------|--------------|-------------|---------------|------|
| smbvol| 20.00 MB| 0.39 MB | 19.61 MB| 0.00 MB
| Thin
| 0.00
MB
| No
|
|-------|---------|----------|---------|--------------|-------------|---------------|------|
| nfsvol| 20.00 MB| 0.36 MB | 19.64 MB| 0.00 MB
| Thin
| 0.00
MB
| No
|
|-------|---------|----------|---------|--------------|-------------|---------------|------|
| vol3 | 20.00 M | 0.27 MB | 19.73 MB| 0.00 MB
| Thin
| 0.00
MB
| No
|
'-------'---------'----------'---------'--------------'-------------'---------------'------'

NAS-volumes Namespace-Aggregation add
Convert a regular folder to a redirection folder to be used for namespace aggregation.

Format
NAS-volumes Namespace-Aggregation add   [options]

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Existing path to a directory

Redirection can be set on empty
directories only.

CLI Commands

99

Options
Option

Description

-EnableSmb
-RemoteSmbShare

Format
Yes or No

Name of the share for the remote Must not be empty when
SMB
corresponding flag is enabled

-EnableNFS

Yes or No

-RemoteNfsExport

Must not be empty when
corresponding flag is enabled

Example
Enable Namespace Aggregation on a a NAS volume named vol1:
CLI> NAS-volumes Namespace-Aggregation add vol1

NAS-volumes Namespace-Aggregation create-folder
Create a redirection folder on a volume.
A redirection folder points clients to other shares residing internally or externally to a FluidFS system.

Format
NAS-volumes Namespace-Aggregation create-folder  


Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Parent folder under the NAS
volume

Existing parent folder



Name of the new folder

Less than 255 characters and
cannot contain the following
characters: < > " \ | ? *. Also, the
path cannot include ., .., and so
on.

Example
Create /folder1 on a NAS volume named vol2:
CLI> NAS-volumes Namespace-Aggregation create-folder vol2 / folder1

100

CLI Commands

NAS-volumes Namespace-Aggregation delete
Delete a redirection folder from a volume.

Format
NAS-volumes Namespace-Aggregation delete  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Path to an existing volume

Example
Delete /folder1 on a NAS volume named vol2:
CLI> NAS-volumes Namespace-Aggregation delete vol2 /folder1

NAS-volumes Namespace-Aggregation edit
Edit namespace aggregation settings on a NAS volume.

Format
NAS-volumes Namespace-Aggregation edit   [options]

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Existing path to a directory

Options
Option
-EnableSmb
-RemoteSmbShare

Description

Format
Yes or No

Name of the share for the remote Must not be empty when
SMB
corresponding flag is enabled

-EnableNFS

Yes or No

-RemoteNfsExport

Must not be empty when
corresponding flag is enabled

CLI Commands

101

Example
Edit Namespace Aggregation settings on a a NAS volume named vol2:
CLI> NAS-volumes Namespace-Aggregation edit vol2

NAS-volumes Namespace-Aggregation edit-by-dsid
Edit namespace aggregation settings on a NAS volume by dataset identifier (DSID).

Format
NAS-volumes Namespace-Aggregation edit-by-dsid  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



An existing path to a directory

Options
Option

Description

Format

-RemoteHost
-EnableSmb
-RemoteSmbShare

Yes or No
Name of the share for the remote Must not be empty when
SMB
corresponding flag is enabled.

-EnableNFS

Yes or No

-RemoteNfsExport

Must not be empty when
corresponding flag is enabled.

Example
Edit namespace aggregation settings on a a NAS volume named vol2 by DSID:
CLI> NAS-volumes Namespace-Aggregation edit-by-dsid vol1 

NAS-volumes Namespace-Aggregation list
List the redirection folders that exist on a volume.

Format
NAS-volumes Namespace-Aggregation list 

102

CLI Commands

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

Example
List the redirection folders on a NAS volume named vol2:
CLI> NAS-volumes Namespace-Aggregation list vol2

NAS-volumes Namespace-Aggregation view
View the redirection folders that exist on a volume.

Format
NAS-volumes Namespace-Aggregation view  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Path to an existing volume

Example
View namespace aggregation settings on a NAS volume named vol2:
CLI> NAS-volumes Namespace-Aggregation view vol2

NAS-volumes Namespace-Aggregation view-by-dsid
View the redirection folders that exist on a volume by dataset ID.

Format
NAS-volumes Namespace-Aggregation view-by-dsid

 

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Dataset identification

Allows working with entries that
cannot be resolved to valid
directories (for example, due to
cache loss)

CLI Commands

103

Example
View namespace aggregation settings on a NAS volume named vol1 by DSID:
CLI> NAS-volumes Namespace-Aggregation view-by-dsid vol1

NAS-volumes NAS-pool capacity-overtime last-day
Display the last day's NAS pool statistics.

Format
NAS-volumes NAS-pool capacity-overtime last-day

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the last day's NAS pool statistics:
CLI> NAS-volumes NAS-pool capacity-overtime last-day

Output
.-------------------.---------.--------.---------------.------------------.
| Time
| Capacity| Used
|Unused Reserved| Unused Unreserved|
|-------------------|---------|--------|---------------|------------------|
| 16-May-13 13:52:20| 1.70 TB | 1.00 MB| 41.00 MB
| 1.70 TB
|
|-------------------|---------|--------|---------------|------------------|
| 16-May-13 12:00:00| 1.70 TB | 1.00 MB| 19.00 MB
| 1.70 TB
|
|-------------------|---------|--------|---------------|------------------|
| 16-May-13 11:00:00| 1.70 TB | 0.00 MB| 19.00 MB
| 1.70 TB
|
|-------------------|---------|--------|---------------|------------------|
...[snip]...

NAS-volumes Namespace-Aggregation view-by-dsid
View the redirection folders that exist on a volume by dataset ID.

Format
NAS-volumes Namespace-Aggregation view-by-dsid

104

 

CLI Commands

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Dataset identification

Allows working with entries that
cannot be resolved to valid
directories (for example, due to
cache loss)

Example
View namespace aggregation settings on a NAS volume named vol1 by DSID:
CLI> NAS-volumes Namespace-Aggregation view-by-dsid vol1

NAS-volumes NAS-pool capacity-overtime last-month
Display the last month's NAS pool statistics.

Format
NAS-volumes NAS-pool capacity-overtime last-month

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the last month's NAS pool statistics:
CLI> NAS-volumes NAS-pool capacity-overtime last-month

Output
.-------------------.---------.--------.----------------.------------------.
| Time
| Capacity| Used
| Unused Reserved| Unused Unreserved|
|-------------------|---------|--------|----------------|------------------|
| 16-May-13 13:53:28| 1.70 TB | 1.00 MB| 41.00 MB
| 1.70 TB
|
|-------------------|---------|--------|----------------|------------------|
| 15-May-13 00:00:00| 1.70 TB | 0.00 MB| 19.00 MB
| 1.70 TB
|
|-------------------|---------|--------|----------------|------------------|
| 14-May-13 00:00:00| 1.70 TB | 0.00 MB| 19.00 MB
| 1.70 TB
|
|-------------------|---------|--------|----------------|------------------|
...[snip]...

CLI Commands

105

NAS-volumes NAS-pool capacity-overtime last-week
Display the last week’s NAS pool statistics.

Format
NAS-volumes NAS-pool capacity-overtime last-week

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the last week’s NAS pool statistics:
CLI> NAS-volumes NAS-pool capacity-overtime last-week

Output
.-------------------.--------.---------.----------------.-----------------.
| Time
|Capacity| Used
|Unused Reserved |Unused Unreserved|
|-------------------|--------|---------|----------------|-----------------|
| 16-May-13 13:52:48| 1.70 TB| 1.00 MB | 41.00 MB
| 1.70 TB
|
|-------------------|--------|---------|----------------|-----------------|
| 16-May-13 06:00:00| 1.70 TB| 0.00 MB | 19.00 MB
| 1.70 TB
|
|-------------------|--------|---------|----------------|-----------------|
| 16-May-13 00:00:00| 1.70 TB| 0.00 MB | 19.00 MB
| 1.70 TB
|
|-------------------|--------|---------|----------------|-----------------|
...[snip]...

NAS-volumes NAS-pool capacity-overtime last-year
Display the last year’s NAS pool statistics.

Format
NAS-volumes NAS-pool capacity-overtime last-year

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

106

CLI Commands

Example
Display the last year's NAS pool statistics:
CLI> NAS-volumes NAS-pool capacity-overtime last-year

Output
.-------------------.---------.--------.----------------.------------------.
| Time
| Capacity| Used
| Unused Reserved| Unused Unreserved|
|-------------------|---------|--------|----------------|------------------|
| 16-May-13 13:54:02| 1.70 TB | 1.00 MB| 41.00 MB
| 1.70 TB
|
|-------------------|---------|--------|----------------|------------------|
| 02-May-13 00:00:00| 0.00 MB | 0.00 MB| 0.00 MB
| 0.00 MB
|
|-------------------|---------|--------|----------------|------------------|
| 18-Apr-13 00:00:00| 0.00 MB | 0.00 MB| 0.00 MB
| 0.00 MB
|
|-------------------|---------|--------|----------------|------------------|
...[snip]...

NAS-volumes NAS-pool configuration edit
Modify the NAS pool settings.

Format
NAS-volumes NAS-pool configuration edit {options}

Options
Option

Description

Format

EnableUsedSpaceAlertThreshold
Percent


Indicate whether the NAS pool
used space threshold is enabled

Possible values are Yes, No

NAS pool used space threshold
UsedSpaceAlertThresholdPercent (percent of the NAS pool)


Zero-based, whole positive
number (0 to 100)

Indicate whether the NAS pool
EnableAvailableSpaceAlertThresh unused space threshold is
old
enabled


Possible values are Yes, No

-AvailableSpaceAlertThreshold


Floating point number (for
example, 50MB)

CLI Commands

NAS pool unused space
threshold

107

Example
Change the NAS pool used space alert threshold percent to 90%:
CLI> NAS-volumes NAS-pool configuration edit -UsedSpaceAlertThresholdPercent 90

NAS-volumes NAS-pool configuration view
Description
Display NAS pool settings.

Format
NAS-volumes NAS-pool configuration view

Example
Display the current NAS pool settings:
CLI> NAS-volumes NAS-pool configuration view

Output
Enable Used Space Alert Threshold Percent
Used Space Alert Threshold Percent
Enable Available Space Alert Threshold
Available Space Alert Threshold

=
=
=
=

Yes
90%
Yes
10.00 GB

=
=
=
=
=
=

1.70 TB
42.00 MB
1.69 MB
1.70 TB
41.22 MB
1.70 TB

NAS-volumes NAS-pool view
Description
Display current NAS pool information.

Format
NAS-volumes NAS-pool view

Example
Display current NAS pool information:
CLI> NAS-volumes NAS-pool view

Output
Total
Total
Total
Total
Total
Total

108

Capacity
Reserved
Used
Unused
Unused Reserved
Unused Unreserved

CLI Commands

Total Over Committed
Total Optimization Saved Space
Total Optimization Saved Space Percent
Number Of NAS Volumes
Number Of NAS Volumes With Snapshots
Number Of NAS Volumes With Replication
Number Of NAS Volumes With Data Reduction
Number Of Cloned Volumes

=
=
=
=
=
=
=
=

0.00 MB
0.00 MB
0
5
2
0
0
1

NAS-volumes nfs-export select access create
Create the user access to the NFS export.

Formats
nfs-export select nfs_export_name access create netgroup netgroup_name trusteduser
nfs-export select nfs_export_name access create client-ip ip_netmask trusteduser

Arguments
Variable

Description

Format



NAS container name

Existing NAS container name



NFS export name

Existing NFS export name



Client’s netgroup to which this NFS
export should be available

Existing netgroup name



IP and netmask addresses for the client
Client IP
to provide NFS export access to. This
address ensures that only the client’s root
user can access the export.

Options
Parameter

Description

Format

trusted-user

Trusted users to which this NFS export is
available

Possible values are Nobody, All, and All
except root

NAS-volumes NFS-exports add
Add an NFS (Network File System) export to a NAS volume.

Format
NAS-volumes NFS-exports add    {options}

CLI Commands

109

Arguments
Argument

Description

Format



NFS export name

Maximum length of 255
characters, and can contain
letters, numbers, and
underscores. The name must
start with a letter.



NAS volume name

Existing NAS volume name



NFS export path in the NAS
volume

Existing NFS export path

Option

Description

Format

-EnableLimitReportedSize


Indicate whether it is required to
limit the reported size

Possible values are Yes, No

-LimitReportedSize


Limited reported size

Floating point number with suffix
of units (for example, 100MB)

-RequireSecurePort


Indicate whether it is required to
use a secure port

Possible values are Yes, No

-Comment 

Comment for the NFS export

Any string

-UnixStyle 

Indicate whether the NFS export
uses system default
authentication

Possible values are Yes, No

-Krb5 

Indicate whether the NFS export
can use Kerberos for
authentication

Possible values are Yes, No

-Krb5i 

Indicate whether the NFS export Possible values are Yes, No
can use Kerberos for
authentication, and includes a
hash with each transaction to
ensure integrity. Traffic can still
be intercepted and examined, but
modifications to the traffic will be
apparent.

-Krb5p 

Indicate whether the NFS export
can use Kerberos for
authentication, and encrypts all
traffic between the client and
server. This method is the most
secure, but also incurs the most
overhead.

Options

110

Possible values are Yes, No

CLI Commands

Option

Description

Format

-Report32bitInode


Indicate whether the NFS export Possible values are Yes, No
reports 32-bit inode to the clients

Example
Add an NFS export named export1 to a NAS volume named vol2 at the path /folder:
CLI> NAS-volumes NFS-exports add export1 vol2 /folder

NAS-Volumes nfs-export select access show
Display a list of all the ACLs on a particular NFS export.

Format
nfs-export select  access show

Arguments
Argument

Description

Format



NFS export name

Existing NFS export name

NAS-volumes NFS-exports add-acl for-all-clients
Add an ACL (access control list) for all clients accessing an NFS export.

Format
NAS-volumes NFS-exports add-acl for-all-clients  
 

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



NFS export name

Existing NFS export name



Type of users to which this NFS
export should be available

Possible values are Nobody,
EveryoneExceptRoot. Note that
"Everyone" is not permitted with
no restriction to a netgroup, a
subnet, or a client machine.



Indicate whether the NFS export
is read‑write

Possible values are Yes, No

CLI Commands

111

Example
Add an ACL for all clients accessing a read-write NFS export named export1 on a NAS volume named vol2
with a trust type of EveryoneExceptRoot:
CLI> NAS-volumes NFS-exports add-acl for-all-clients vol2 export1
EveryoneExceptRoot Yes

NAS-volumes NFS-exports add-acl for-clients-innetgroup
Add an ACL (access control list) for all clients in a netgroup accessing an NFS export.

Format
NAS-volumes NFS-exports add-acl for-clients-in-netgroup 
   

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



NFS export name

Existing NFS export name



Client’s netgroup to which this
NFS export should be available

Netgroup name



Type of users to which this NFS
export should be available

Possible values are Nobody,
Everyone, EveryoneExceptRoot



Indicate whether the NFS export
is read‑write

Possible values are Yes, No

Example
Add an ACL for all clients in a netgroup 172.22.69.0 /24 accessing a read-write NFS export named export1
on a NAS volume named vol2 with a trust type of Everyone:
CLI> NAS-volumes NFS-exports add-acl for-clients-in-netgroup vol2 export1
172.22.69.0 /24 Everyone Yes

NAS-volumes NFS-exports add-acl for-clients-in-subnet
Add an ACL (access control list) for all clients in a subnet accessing an NFS export.

Format
NAS-volumes NFS-exports add-acl for-clients-in-subnet  
   

112

CLI Commands

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



NFS export name

Existing NFS export name



Network ID of the clients to
which this NFS export should be
available

IP address in IPv6 or IPv4 format



Network prefix length of the
clients to which this NFS export
should be available

An integer (up to 30 for IPv4, up
to 126 for IPv6).



Type of users to which this NFS
export should be available

Possible values are Nobody,
Everyone, EveryoneExceptRoot



Indicate whether the NFS export
is read‑write

Possible values are Yes, No

Example
Add an ACL for all clients in a subnet 172.22.69.0 /24 accessing a read-write NFS export named export1
on a NAS volume named vol2 with a trust type of Everyone:
CLI> NAS-volumes NFS-exports add-acl for-clients-in-subnet vol2 export1
172.22.69.0 /24 Everyone Yes

NAS-volumes NFS-exports add-acl for-single-client
Add an ACL (access control list) for a single client accessing an NFS export.

Format
NAS-volumes NFS-exports add-acl for-single-client  
  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



NFS export name

Existing NFS export name



Client to which this NFS export
should be available

Existing host name or IP address
in IPv6 or IPv4 format



Type of users to which this NFS
export should be available

Possible values are Nobody,
Everyone, EveryoneExceptRoot



Indicate whether the NFS export
is read‑write

Possible values are Yes, No

CLI Commands

113

Example
Add an ACL for a single client with the IP address 172.22.69.18 accessing a read-write NFS export named
export1 on a NAS volume named vol2 with a trust type of Everyone:
CLI> NAS-volumes NFS-exports add-acl for-single-client vol2 export1
172.22.69.18 Everyone Yes

NAS-volumes NFS-exports create-folder
Description
Create a new folder for an NFS export.

Format
NAS-volumes NFS-exports create-folder  


Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Parent folder under the NAS
volume

Existing parent folder



Name of the new folder

Less than 255 characters and
may not contain the following
characters: < > " \ | ? *. Also, the
path may not include ., .., and so
on.

Example
Create an NFS export folder named folder1 with a parent folder / on a NAS volume named vol2:
CLI> NAS-volumes NFS-exports create-folder vol2 / folder1

NAS-volumes NFS-exports delete
Description
Delete an NFS export.

Format
NAS-volumes NFS-exports delete  

114

CLI Commands

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



NFS export name

Existing NFS export name

Example
Delete an NFS export named export1 from a NAS volume named vol2:
CLI> NAS-volumes NFS-exports delete vol2 export1

NAS-volumes NFS-exports delete-acl for-all-clients
Delete an ACL for all clients accessing an NFS export.

Format
NAS-volumes NFS-exports delete-acl for-all-clients  


Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



NFS export name

Existing NFS export name



Type of users for which this NFS
export was defined

Possible values are Nobody,
EveryoneExceptRoot

Example
Delete an ACL for all clients accessing an NFS export named export1 on a NAS volume named vol2 with a
trust type of EveryoneExceptRoot:
CLI> NAS-volumes NFS-exports delete-acl for-all-clients vol2 export1
EveryoneExceptRoot

NAS-volumes NFS-exports delete-acl for-clients-innetgroup
Delete an ACL for all clients in a netgroup accessing an NFS export.

Format
NAS-volumes NFS-exports delete-acl for-clients-in-netgroup 
  

CLI Commands

115

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



NFS export name

Existing NFS export name



Clients netgroup to which this
NFS export should be available

Existing netgroup name



Type of users to which this NFS
export should be available

Possible values are Nobody,
Everyone, EveryoneExceptRoot

Example
Delete an ACL for all clients in a netgroup named group1 accessing an NFS export named export1 on a
NAS volume named vol2 with a trust type of Everyone:
CLI> NAS-volumes NFS-exports delete-acl for-clients-in-netgroup vol2 export1
group1 Everyone

NAS-volumes NFS-exports delete-acl for-clients-insubnet
Delete an ACL for all clients in a subnet accessing an NFS export.

Format
NAS-volumes NFS-exports delete-acl for-clients-in-subnet 
   

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



NFS export name

Existing NFS export name



Clients network ID to which this
NFS export should be available

IP address in IPv6 or IPv4 format



Length of the prefix of the clients Integer (up to 30 for IPv4, up to
to which this NFS export should
126 for IPv6)
be available



Type of users to which this NFS
export should be available

116

Possible values are Nobody,
Everyone, EveryoneExceptRoot

CLI Commands

Example
Delete an ACL for all clients in the subnet 172.22.69.0 /24 accessing an NFS export named export1 on a
NAS volume named vol2 with a trust type of Everyone:
CLI> NAS-volumes NFS-exports delete-acl for-clients-in-subnet vol2 export1
172.22.69.0 24 Everyone

NAS-volumes NFS-exports delete-acl for-single-client
Delete an ACL for a single client accessing an NFS export.

Format
NAS-volumes NFS-exports delete-acl for-single-client  
 

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



NFS export name

Existing NFS export name



Client to which this NFS export
should be available

Existing host name or IP address
in the format: 'x.x.x.x'



Type of users to which this NFS
export should be available

Possible values are Nobody,
Everyone, EveryoneExceptRoot

Example
Delete an ACL for a single client 172.22.69.18 accessing an NFS export named export1 on a NAS volume
named vol2 with a trust type of Everyone:
CLI> NAS-volumes NFS-exports delete-acl for-single-client vol2 export1
172.22.69.18 Everyone

NAS-volumes NFS-exports edit
Modify the NFS export settings.

Format
NAS-volumes NFS-exports edit   {options}

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



NFS export name

Existing NFS export name

CLI Commands

117

Options
Option

Description

Format

-EnableLimitReportedSize


Indicate whether it is required to
limit the reported size

Possible values are Yes, No

-LimitReportedSize


Limited reported size

Floating point number with suffix
of units (for example, 100MB)

-RequireSecurePort


Indicate whether it is required to
use a secure port

Possible values are Yes, No

-Comment 

Comment for the NFS export

Any string

-UnixStyle 

Indicate whether the NFS export
uses system default
authentication

Possible values are Yes, No

-Krb5 

Indicate whether the NFS export
uses only Kerberos for
authentication

Possible values are Yes, No

-Krb5i 

Indicate whether the NFS export
uses Kerberos for authentication,
and includes a hash with each
transaction to ensure integrity.
Traffic can still be intercepted
and examined, but modifications
to the traffic will be apparent.

Possible values are Yes, No

-Krb5p 

Indicate whether the NFS export
uses Kerberos for authentication,
and encrypts all traffic between
the client and server. This
method is the most secure, but
also incurs the most overhead.

Possible values are Yes, No

-Report32bitInode


Indicate whether the NFS export Possible values are Yes, No
reports 32-bit inode to the clients

Example
Modify an NFS export named export1 on a NAS volume named vol2 to limit the reported size to 50 MB:
CLI> NAS-volumes NFS-exports edit vol2 export1 -EnableLimitReportedSize Yes LimitReportedSizeMB 50MB

118

CLI Commands

NAS-volumes NFS-exports list
Display a list of NFS exports.

Format
NAS-volumes NFS-exports list {options}

Options
Option

Description

Format

-VolumeName 

NAS volume name

Existing NAS volume name

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a current list of NFS exports:
CLI> NAS-volumes NFS-exports list

Output
.---------------------------.-------------.-------------------.---------.
| Export Name
| Volume Name | Path
| Comment |
|---------------------------|-------------|-------------------|---------|
| export1
| vol2
| /folder
|
|
'---------------------------'-------------'-------------------'---------'

NAS-volumes NFS-exports view
Display NFS export settings.

Format
NAS-volumes NFS-exports view  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



NFS export name

Existing NFS export name

Example
Display the current NFS export settings for an NFS export named export1 on a NAS volume named vol2:
CLI> NAS-volumes NFS-exports view vol2 export1

CLI Commands

119

Output
Export Name
= export1
Volume Name
= vol2
Path
= /folder
Enable Limit Reported Size = No
Limit Reported Size
= 0.00 MB
Require Secure Port
= Yes
Comment
=
Sys
= Yes
Krb5
= Yes
Krb5i
= Yes
Krb5p
= Yes
Report32bitInode
= Yes
AccessDetails
=
.--------------------.------------------.------------------.----------.--------------------.
| Export To
| Export To Clients| Export To Netmask| ReadWrite|
TrustUsers
|
|--------------------|------------------|------------------|----------|--------------------|
| All Client Machines|
| 0.0.0.0
| Yes
|
Everyone except root|
'--------------------'------------------'------------------'----------'--------------------'

NAS-volumes quota directory add
Add a quota rule for a directory.

Format
NAS-volumes quota directory add   [options]

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Existing path to an empty
directory

Options
Option

Description

Format

-IsRequiredAlert

Indicate whether alert event to
the administrator is enabled

Yes or No

-SoftLimit

Soft quota limit

Example: 50MB

-IsQuotaLimited

Indicate whether the hard quota
is enabled

Yes or No

-HardLimit

Hard quota limit

Example: 50MB

120

CLI Commands

Example
Change a directory into a quota directory on a NAS volume named vol1 and limit the quota to 2 GB:
CLI> NAS-volumes quota directory add vol1 /volume2 -isquotalimited yes hardlimit 2GB

NAS-volumes quota directory create-folder
Create a new folder on a NAS volume.
NOTE: Run the NAS-volumes quota directory add command on this folder before adding any
subdirectories or files in the newly created folder.

Format
NAS-volumes quota directory create-folder   

Options
Option

Description

Format



NAS volume name

Existing NAS volume name



Parent folder under the NAS
volume



Name of the new folder

Example
Create a new folder called /Name/NewFolder on a NAS volume named vol1:
CLI> NAS-volumes quota directory create-folder VolumeName vol1/Name/NewFolder

NAS-volumes quota directory delete
Change a quota directory back into a plain directory on a NAS volume.

Format
NAS-volumes quota directory delete  

Options
Option

Description

Format



NAS volume name

Existing NAS volume name



Path to the quota directory

CLI Commands

121

NAS-volumes quota directory edit
Modify a quota directory on a NAS volume.

Format
NAS-volumes quota directory edit   [options]

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Path to the quota directory

Options
Option

Description

Format

-IsRequiredAlert

Indicate whether the soft quota is Yes or No
enabled

-SoftLimit

Soft quota limit

Example: 50MB

-IsQuotaLimited

Indicate whether the hard quota
is enabled

Yes or No

-HardLimit

Hard quota limit

Example: 50MB

Example
Modify the soft limit of a directory quota on a NAS volume named vol1:
CLI> NAS-volumes quota directory edit vol1 -SoftLimit 100MB

NAS-volumes quota directory list
Display a list of quota directories on a NAS volume.

Format
NAS-volumes quota directory list  {options}

Options
Option

Description

Format



NAS volume name

Existing NAS volume name

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

122

CLI Commands

Example
Display a current list of quota directories on a NAS volume named jvol1:
CLI> NAS-volumes quota directory list jvol1

Output
CLI/NAS-volumes/quota/directory> list jvol1
.--------.-------.------------.-----------.---------.-----------.---------.
| Volume | Path | Is Required| Soft Limit| Is Quota| Hard Limit| Usage
|
| Name |
| Alert
|
| Limited |
|
|
|--------|-------|------------|-----------|---------|-----------|---------|
| jvol1 | /Qdir2| No
| 0.00 MB
| Yes
| 1.00 GB
| 0.00 MB |
'--------'-------'------------'-----------'---------'-----------'---------'

NAS-volumes quota directory view
View details of a quota directory on a NAS volume.

Format
NAS-volumes quota directory view  

Options
Option

Description

Format



NAS volume name

Existing NAS volume name



Path to the quota directory

Example
View details of a quota directory named /Qdir2 on a NAS volume named jvol1:
CLI> NAS-volumes quota directory view jvol1/Qdir2

Output
CLI/NAS-volumes/quota/directory> list jvol1
.------------.-------.------------------.-----------.-----------------.----------.--------.
| Volume Name| Path | Is Required Alert| Soft Limit| Is Quota Limited| Hard
Limit| Usage |
|------------|-------|------------------|-----------|-----------------|----------|--------|
| jvol1
| /Qdir | No
| 0.00 MB
| Yes
| 1.00
GB
| 0.00 MB|
'------------'-------'------------------'-----------'-----------------'----------'--------'
CLI/NAS-volumes/quota/directory> view jvol1 /Qdir2
Volume Name
= jvol1
Path
= /Qdir2
IsRequiredAlert = No
Soft Limit
= 0.00 MB

CLI Commands

123

IsQuotaLimited
Hard Limit
Usage

= Yes
= 1.00 GB
= 0.00 MB

NAS-volumes quota rules groups add
Add a group quota rule on a NAS volume.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota rules groups add   
{options}

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Group domain

Existing group domain



Group name

Existing group name

Option

Description

Format

-IsRequiredAlert


Indicate whether the soft quota is Possible values are Yes, No
enabled

-SoftLimit 

Soft quota limit

Floating point number with suffix
of units (for example, 100MB)

-IsQuotaLimited


Indicate whether the hard quota
is enabled

Possible values are Yes, No

-HardLimit 

Hard quota limit

Floating point number with suffix
of units (for example, 100MB)

Options

Example
Add a hard quota of 50 MB for a group named groupA in a domain named idffs2 on a NAS volume named
vol1:
CLI> NAS-volumes quota rules groups add vol1 idffs2 groupA -IsQuotaLimited Yes HardLimit 50MB

124

CLI Commands

NAS-volumes quota rules groups default edit
Modify the default rule for the group quota for a NAS volume.

Format
NAS-volumes quota rules groups default edit  {options}

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

Description

Format

Options
Option

-DefaultGroupQuotaIsRequiredAlert Indicate whether the soft quota Possible values are Yes, No
 is enabled
-DefaultGroupQuotaSoftLimit


Soft quota limit

Floating point number with
suffix of units (for example,
100MB)

-DefaultGroupQuotaIsQuotaLimited Indicate whether the hard
 quota is enabled

Possible values are Yes, No

-DefaultGroupQuotaHardLimit


Floating point number with
suffix of units (for example,
100MB)

Hard quota limit

Example
Add a hard quota of 50 MB for groups on a NAS volume named vol1:
CLI> NAS-volumes quota rules groups default edit vol1 DefaultGroupQuotaIsQuotaLimited Yes -DefaultGroupQuotaHardLimit 50MB

NAS-volumes quota rules groups default view
Description
Display default group quota settings for a NAS volume.

Format
NAS-volumes quota rules groups default view 

CLI Commands

125

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

Example
Display the current default group quota settings for a NAS volume named vol1:
CLI> NAS-volumes quota rules groups default view vol1

Output
Name
Default
Default
Default
Default

Group
Group
Group
Group

Quota
Quota
Quota
Quota

Is Required Alert
Soft Limit
Is Quota Limited
Hard Limit

=
=
=
=
=

vol1
No
0
Yes
50

NAS-volumes quota rules groups delete
Description
Delete a group quota rule from a NAS volume.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota rules groups delete   

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Group domain

Existing group domain



Group name

Existing group name

Example
Delete a group quota rule for a group named groupA in a domain named idffs2 on a NAS volume named
vol1:
CLI> NAS-volumes quota rules groups delete vol1 idffs2 groupA

126

CLI Commands

NAS-volumes quota rules groups delete-by-group-ID
Description
Delete a group quota rule from a NAS volume using the group ID.

Format
NAS-volumes quota rules groups delete-by-group-ID  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Group ID (GID or GSID)

Existing GID or GSID

Example
Delete a group quota rule for a group with the GSID
S-1-5-21-3013153020-774773256-2344179283-3003 on a NAS volume named vol1:
CLI> NAS-volumes quota rules groups delete-by-group-ID vol1
S-1-5-21-3013153020-774773256-2344179283-3003

NAS-volumes quota rules groups edit
Description
Modify a group quota rule on a NAS volume.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota rules groups edit   
{options}

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Group domain

Existing group domain



Group name

Existing group name

CLI Commands

127

Options
Option

Description

-IsRequiredAlert


Indicate whether the soft quota is Possible values are Yes, No
enabled

-SoftLimit 

Soft quota limit

Floating point number with suffix
of units (for example, 100MB)

-IsQuotaLimited


Indicate whether the hard quota
is enabled

Possible values are Yes, No

-HardLimit 

Hard quota limit

Floating point number with suffix
of units (for example, 100MB)

Example
Change the hard quota to 60 MB for a group named groupA in a domain named idffs2 on a NAS volume
named vol1:
CLI> NAS-volumes quota rules groups edit vol1 idffs2 groupA -IsQuotaLimited Yes
-HardLimit 60MB

NAS-volumes quota rules groups list
Description
Display a list of group quota rules on a NAS volume.

Format
NAS-volumes quota rules groups list  {options}

Options
Option

Description

Format

-


NAS volume name

Existing NAS volume name

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display a current list of group quota rules on a NAS volume named vol1:
CLI> NAS-volumes quota rules groups list -VolumeName
vol1

128

CLI Commands

Output
.----------.----------.----------.----------.----------.----------.----------.
| Volume
| Group
| Group
| Is
| Soft
| Is Quota | Hard
|
| Name
| Domain
| Name
| Required | Limit
| Limited | Limit
|
|
|
|
| Alert
|
|
|
|
|----------|----------|----------|----------|----------|----------|----------|
| vol1
| idffs2
| groupA
| No
| 0.00 MB | Yes
| 50.00 MB |
'----------'----------'----------'----------'----------'----------'----------'

NAS-volumes quota rules groups view
Description
Display the settings for a group quota rule on a NAS volume.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota rules groups view   

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Group domain

Existing group domain



Group name

Existing group name

Example
Display the current settings for a group quota rule for a group named groupA in a domain named idffs2
on a NAS volume named vol1:
CLI> NAS-volumes quota rules groups view vol1 idffs2 groupA

Output
Volume Name
Group Domain
Group Name
Is Required Alert
Soft Limit
Is Quota Limited
Hard Limit

CLI Commands

=
=
=
=
=
=
=

vol1
idffs2
groupA
No
0.00 MB
Yes
50.00 MB

129

NAS-volumes quota usage groups list
Description
Display a list of groups usage on a NAS volume.

Format
NAS-volumes quota usage groups list {options}

Options
Option

Description

Format

-VolumeName 

NAS volume name

Existing NAS volume name

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display a current list of groups usage on a NAS volume named vol1:
CLI> NAS-volumes quota usage groups list -VolumeName vol1

Output
.-------------.--------------.-------------.---------.
| Volume Name | Group Domain | Group Name | Usage
|
|-------------|--------------|-------------|---------|
| vol1
| idffs2
| Local Users |50.00 MB |
'-------------'--------------'-------------'---------'

NAS-volumes quota usage group view
Description
Display the usage of a group on a NAS volume.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota usage group view   

130

CLI Commands

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Group domain

Existing group domain



Group name

Existing group name

Example
Display the usage of a group named groupA in a domain named idffs2 on a NAS volume named vol1:
CLI> NAS-volumes quota usage group view vol1 idffs2 groupA

Output
Volume Name
Group Domain
Group Name
Usage

=
=
=
=

vol1
idffs2
groupA
50.00 MB

NAS-volumes quota usage group view-by-id
Display the usage of a group on a NAS volume using the group ID.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota usage group view-by-id  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Group ID (GID or SID)

Existing group ID

Example
Display the usage of a group ID on a NAS volume named vol21:
CLI> NAS-volumes quota usage group view-by-id
S-1-5-21-3013153020-774773256-2344179283-3003 vol2

Output
Volume Name = vol1
Group ID = S-1-5-21-3013153020-774773256-2344179283-3003
Usage
= 50.00 MB

CLI Commands

131

NAS-volumes quota usage group view-effective-rules
Description
Display the effective quota rules for a group on a NAS volume.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota usage group view-effective-rules  


Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Group domain

Existing group domain



Group name

Existing group name

Example
Display the effective quota rules for a group named groupA in a domain named idffs2 on a NAS volume
named vol1:
CLI> NAS-volumes quota usage group view-effective-rules vol1 idffs2 groupA

Output
Volume Name
= vol1
Group Domain
= idffs2
Group Name
= groupA
Is Group Soft Quota Enabled = No
Group Soft Quota
= 0.00 MB
Is Group Hard Quota Enabled = Yes
Group Hard Quota
= 50.00 MB

NAS-volumes quota usage users list
Description
Display a list of users usage.

Format
NAS-volumes quota usage users list {options}

132

CLI Commands

Options
Option

Description

Format

-VolumeName 

NAS volume name

Existing NAS volume name

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display a current list of users usage for a NAS volume named vol1:
CLI> NAS-volumes quota usage users list -VolumeName vol1

Output
.-------------.-------------.---------------.---------.
| Volume Name | User Domain | User Name
| Usage
|
|-------------|-------------|---------------|---------|
| vol1
| idffs2
| user1
| 5.00 MB |
'-------------'-------------'---------------'---------'
| vol1
| idffs2
| user2
|10.00 MB |
'-------------'-------------'---------------'---------'

NAS-volumes quota usage users view
Description
Display the usage of a user on a NAS volume.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota usage users view  


Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



User domain

Existing user domain



User name

Existing user name

Example
Display the usage of a user named user1 in a domain named idffs2 on a NAS volume named vol1:
CLI> NAS-volumes quota usage users view vol1 idffs2 user1

CLI Commands

133

Output
Volume Name
User Domain
User Name
Usage

=
=
=
=

vol1
idffs2
user1
5.00 MB

NAS-volumes quota usage users view-by-id
Display the usage of a user on a NAS volume by user ID.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota usage users view-by-id  


Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



User ID (UID or SID)

Existing user ID

Example
Display the usage of a user ID user1 in a domain named idffs2 on a NAS volume named vol1:
CLI> NAS-volumes quota usage users view-by-id vol1 idffs2 user1

Output
Volume Name
User Domain
User Name
Usage

=
=
=
=

vol1
idffs2
user1
5.00 MB

NAS-volumes quota usage users view-effective-rules
Display the effective quota rules for a user on a NAS volume.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota usage users view-effective-rules  


134

CLI Commands

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



User domain

Existing user domain



User name

Existing user name

Example
Display the effective quota rules for a user named user1 in a domain named idffs2 on a NAS volume
named vol1:
CLI> NAS-volumes quota usage users view-effective-rules vol1 idffs2 user1

Output
Volume Name
User Domain
User Name
Is User Soft Quota Enabled
User Soft Quota
Is User Hard Quota Enabled
User Hard Quota
Group Domain
Group Name
Is Group Soft Quota Enabled
Group Soft Quota
Is Group Hard Quota Enabled
Group Hard Quota

=
=
=
=
=
=
=
=
=
=
=
=
=

vol1
idffs2
user1
No
0.00 MB
Yes
50.00 MB
idffs2
groupA
No
0.00 MB
Yes
40.00 MB

NAS-volumes quota rules users add
Description
Add a user quota rule on a NAS volume.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota rules users add    {options}

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



User domain

Existing user domain



User name

Existing user name

CLI Commands

135

Options
Option

Description

Format

-IsRequiredAlert


Indicate whether the soft quota is Possible values are Yes, No
enabled

-SoftLimit 

Soft quota limit

Floating point number with suffix
of units (for example, 100MB)

-IsQuotaLimited


Indicate whether the hard quota
is enabled

Possible values are Yes, No

-HardLimit 

Hard quota limit

Floating point number with suffix
of units (for example, 100MB)

Example
Add a 50 MB hard quota user quota rule for a user named user1 in the idffs2 domain on a NAS volume
named vol1:
CLI> NAS-volumes quota rules users add vol1 idffs2 user1 -IsQuotaLimited Yes HardLimit 50MB

NAS-volumes quota rules users default edit
Modify the default rule for the user quota for a NAS volume.

Format
NAS-volumes quota rules users default edit  {options}

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

Options
Option

Description

-DefaultUserQuotaIsRequiredAlert


Indicate whether the soft
quota is enabled

Possible values are Yes, No

-DefaultUserQuotaSoftLimit


Soft quota limit

Floating point number with
suffix of units (for example,
100MB)

-DefaultUserQuotaIsQuotaLimited


Indicate whether the hard
quota is enabled

Possible values are Yes, No

136

CLI Commands

Option

Description

-DefaultUserQuotaHardLimit


Hard quota limit

Floating point number with
suffix of units (for example,
100MB)

Example
Add a hard quota of 10 MB for a NAS volume named vol1:
CLI> NAS-volumes quota rules users default edit vol1 DefaultUserQuotaIsQuotaLimited Yes -DefaultUserQuotaHardLimit 10MB

NAS-volumes quota rules users default view
Description
Display default user quota settings for a NAS volume.

Format
NAS-volumes quota rules users default view 

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

Example
Display the current default user quota settings for a NAS volume named vol1:
CLI> NAS-volumes quota rules users default view vol1

Output
Name
Default
Default
Default
Default

User
User
User
User

Quota
Quota
Quota
Quota

Is Required Alert
Soft Limit
Is Quota Limited
Hard Limit

=
=
=
=
=

vol1
No
0
Yes
100

NAS-volumes quota rules users delete
Description
Delete a user quota rule from a NAS volume.
NOTE: To view a list of existing domains, use the command access-control domains-list.

CLI Commands

137

Format
NAS-volumes quota rules users delete   

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



User domain

Existing user domain



User name

Existing user name

Example
Delete a user quota rule for a user named user1 in the idffs2 domain on a NAS volume named vol1:
CLI> NAS-volumes quota rules users delete vol1 idffs2 user1

NAS-volumes quota rules users delete-by-user-ID
Description
Delete a user quota rule from a NAS volume using the user ID.

Format
NAS-volumes quota rules users delete-by-user-ID  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



User ID (UID or SID)

Existing UID or SID

Example
Delete a user quota rule for a user with the SID S-1-5-21-3013153020-774773256-2344179283-3014 on
a NAS volume named vol1:
CLI> NAS-volumes quota rules users delete-by-user-ID vol1
S-1-5-21-3013153020-774773256-2344179283-3014

NAS-volumes quota rules users edit
Description
Modify a user quota rule on a NAS volume.

138

CLI Commands

NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota rules users edit   
{options}

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



User domain

Existing user domain



User name

Existing user name

Option

Description

Format

-IsRequiredAlert


Indicate whether the soft quota is Possible values are Yes, No
enabled

-SoftLimit 

Soft quota limit

Floating point number with suffix
of units (for example, 100MB)

-IsQuotaLimited


Indicate whether the hard quota
is enabled

Possible values are Yes, No

-HardLimit 

Hard quota limit

Floating point number with suffix
of units (for example, 100MB)

Options

Example
Modify a user quota rule for a user named user1 in the idffs2 domain on a NAS volume named vol1 to
have a hard quota of 40 MB:
CLI> NAS-volumes quota rules users edit vol1 idffs2 user1 -IsQuotaLimited Yes HardLimit 40MB

NAS-volumes quota rules users-in-groups add
Description
Add a quota rule for users in a group on a NAS volume.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota rules users-in-groups add  
 {options}

CLI Commands

139

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Group domain

Existing group domain



Group name

Existing group name

Option

Description

Format

-IsRequiredAlert


Indicate whether the soft quota is Possible values are Yes, No
enabled

-SoftLimit 

Soft quota limit

Floating point number with suffix
of units (for example, 100MB)

-IsQuotaLimited


Indicate whether the hard quota
is enabled

Possible values are Yes, No

-HardLimit 

Hard quota limit

Floating point number with suffix
of units (for example, 100MB)

Options

Example
Add a hard quota of 50 MB for any users in a group named groupA in a domain named idffs2 on a NAS
volume named vol1:
CLI> NAS-volumes quota rules users-in-groups add vol1 idffs2 groupA IsQuotaLimited Yes -HardLimit 50MB

NAS-volumes quota rules users-in-groups delete
Description
Delete a quota rule for users in a group from a NAS volume.

Format
NAS-volumes quota rules users-in-groups delete  


Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Group domain

Existing group domain



Group name

Existing group name

140

CLI Commands

Example
Delete a hard quota rule for any users in a group named groupA in a domain named idffs2 on a NAS
volume named vol1:
CLI> NAS-volumes quota rules users-in-groups delete vol1 idffs2 groupA

NAS-volumes quota rules users-in-groups delete-bygroup-ID
Description
Delete a quota rule for users in a group from a NAS volume using the group ID.

Format
NAS-volumes quota rules users-in-groups delete-by-group-ID 


Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Group ID (GID or GSID)

Existing GID or GSID

Example
Delete a hard quota rule for any users in a group with the GSID
S-1-5-21-3013153020-774773256-2344179283-3003 on a NAS volume named vol1:
CLI> NAS-volumes quota rules users-in-groups delete-by-group-ID vol1
S-1-5-21-3013153020-774773256-2344179283-3003

NAS-volumes quota rules users-in-groups edit
Description
Modify a quota rule for users in a group on a NAS volume.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota rules users-in-groups edit  
 {options}

CLI Commands

141

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Group domain

Existing group domain



Group name

Existing group name

Option

Description

Format

-IsRequiredAlert


Indicate whether the soft quota is Possible values are Yes, No
enabled

-SoftLimit 

Soft quota limit

Floating point number with suffix
of units (for example, 100MB)

-IsQuotaLimited


Indicate whether the hard quota
is enabled

Possible values are Yes, No

-HardLimit 

Hard quota limit

Floating point number with suffix
of units (for example, 100MB)

Options

Example
Change the hard quota to 60 MB for any users in a group named groupA in a domain named idffs2 on a
NAS volume named vol1:
CLI> NAS-volumes quota rules users-in-groups edit vol1 idffs2 groupA IsQuotaLimited Yes -HardLimit 60MB

NAS-volumes quota rules users-in-groups list
Description
Display a list of quota rules for any users in groups for a NAS volume.

Format
NAS-volumes quota rules users-in-groups list {options}

Options
Option

Description

Format

-VolumeName 

NAS volume name

Existing NAS volume name

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

142

CLI Commands

Example
Display a current list of quota rules for any users in groups for a NAS volume:
CLI> NAS-volumes quota rules users-in-groups list

Output
.----------.----------.----------.----------.----------.----------.----------.
| Volume
| Group
| Group
| Is
| Soft
| Is Quota | Hard
|
| Name
| Domain
| Name
| Required | Limit
| Limited | Limit
|
|
|
|
| Alert
|
|
|
|
|----------|----------|----------|----------|----------|----------|----------|
| vol1
| idffs2
| groupA
| No
| 0.00 MB | Yes
| 65.00 MB |
'----------'----------'----------'----------'----------'----------'----------'

NAS-volumes quota rules users-in-groups view
Description
Display the settings of a quota rule for any users in a group for a NAS volume.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota rules users-in-groups view  


Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Group domain

Existing group domain



Group name

Existing group name

Example
Display the current settings for a quota rule for any users in a group named groupA in a domain named
idffs2 on a NAS volume named vol1:
CLI> NAS-volumes quota rules users-in-groups view vol1 idffs2 groupA

Output
Volume Name
Group Domain
Group Name
Is Required Alert
Soft Limit
Is Quota Limited
Hard Limit

CLI Commands

=
=
=
=
=
=
=

vol1
idffs2
groupA
No
0.00 MB
Yes
60.00 MB

143

NAS-volumes quota rules users list
Description
Display a list of user quota rules.

Format
NAS-volumes quota rules users list {options}

Options
Option

Description

Format

-VolumeName 

NAS volume name

Existing NAS volume name

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display a current list of the user quota rules:
CLI> NAS-volumes quota rules users list

Output
.----------.----------.----------.----------.----------.----------.----------.
| Volume
| User
| User
| Is
| SoftLimi | Is Quota | Hard
|
| Name
| Domain
| Name
| Required | t
| Limited | Limit
|
|
|
|
| Alert
|
|
|
|
|----------|----------|----------|----------|----------|----------|----------|
| vol1
| idffs2
| user1
| No
| 0.00 MB | Yes
| 5.00 MB |
'----------'----------'----------'----------'----------'----------'----------'

NAS-volumes quota rules users view
Description
Display the user quota rule settings.
NOTE: To view a list of existing domains, use the command access-control domains-list.

Format
NAS-volumes quota rules users view   

144

CLI Commands

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



User domain

Existing user domain



User name

Existing user name

Example
Display the current settings for a user quota rule for a user named user1 in the idffs2 domain on a NAS
volume named vol1:
CLI> NAS-volumes quota rules users view vol1 idffs2 user1

Output
Volume Name
User Domain
User Name
Is Required Alert
SoftLimit
Is Quota Limited
Hard Limit

=
=
=
=
=
=
=

vol1
idffs2
user1
No
0.00 MB
Yes
5.00 MB

NAS-volumes replication connect
Connect the source NAS volume to the destination NAS volume.

Format
NAS-volumes replication connect  


Arguments
Argument

Description

Format



Source NAS volume name

Existing NAS volume name



Destination FluidFS cluster name

Existing FluidFS cluster name



Destination NAS volume name

Existing NAS volume name

Option

Description

Format

-SnapshotRetentionPolicy


Snapshot retention policy

Valid values are Archive,
Minimum and IdenticalToSource.
If Archive is chosen, then the

Options

CLI Commands

145

Option

Description

Format
retention period in days (integer)
is used.

-SnapshotRetentionPeriodInDays Snapshot retention period on

-Use QOS 

Select whether or not to use QoS Boolean: To use or not QOS

-QOS 

Select existing QoS

QOS entity name (existing)

Example
Connect a source NAS volume named volsource to a destination NAS volume named voldest where the
remote FluidFS cluster name is idffs2:
CLI> NAS-volumes replication connect volsource idffs2 voldest

NAS-volumes replication create-volume-on-destination
Create a NAS volume on remote FluidFS system.

Format
NAS-volumes replication create-volume-on-destination   

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



NAS volume size (for example:
100GB)

Valid units are MB, GB, or TB



Remote cluster

Example
NAS-volumes replication create-volume-on-destination vol1-replica 100GB DR-NAS

NAS-volumes replication demote
Demote the destination NAS volume.

Format
NAS-volumes replication demote  


146

CLI Commands

Arguments
Argument

Description

Format



Source NAS volume name

Existing NAS volume name



Destination FluidFS cluster name

Existing FluidFS cluster name



Destination NAS volume name

Existing NAS volume name

Example
Demote a destination NAS volume named voldest where the source NAS volume is named volsource and
the destination FluidFS cluster name is idffs2:
CLI> NAS-volumes replication demote volsource idffs2 voldest

Output
Confirmation: Changes on destination NAS volume since 13-Aug-13 14:52:06 will
be lost.
Are you sure that you want to complete the operation? ( Yes / No ):

NAS-volumes replication disable
Description
Disable the replication between source and destination NAS volumes.

Format
NAS-volumes replication disable  


Arguments
Argument

Description

Format



Source NAS volume name

Existing NAS volume name



Destination FluidFS cluster name

Existing FluidFS cluster name



Destination NAS volume name

Existing NAS volume name

Example
Disable the replication between a source NAS volume named volsource and a destination NAS volume
named voldest where the remote FluidFS cluster name is idffs2:
CLI> NAS-volumes replication disable volsource idffs2 voldest

CLI Commands

147

NAS-volumes replication disconnect
Description
Disconnect the source NAS volume from the destination NAS volume.
NOTE: Before you can disconnect a source NAS volume, the destination NAS volume must be
promoted using the command NAS-volumes replication promote.

Format
NAS-volumes replication disconnect  


Arguments
Argument

Description

Format



Source NAS volume name

Existing NAS volume name



Destination FluidFS cluster name

Existing FluidFS cluster name



Destination NAS volume name

Existing NAS volume name

Example
Disconnect a source NAS volume named volsource from a destination NAS volume named voldest where
the remote FluidFS cluster name is idffs2:
CLI> NAS-volumes replication disconnect volsource idffs2 voldest

NAS-volumes replication enable
Description
Enable the replication between source and destination NAS volumes.

Format
NAS-volumes replication enable  


Arguments
Argument

Description

Format



Source NAS volume name

Existing NAS volume name



Destination FluidFS cluster name

Existing FluidFS cluster name



Destination NAS volume name

Existing NAS volume name

148

CLI Commands

Example
Enable the replication between a source NAS volume named volsource and a destination NAS volume
named voldest where the remote FluidFS cluster name is idffs2:
CLI> NAS-volumes replication enable volsource idffs2 voldest

NAS-volumes replication list-destination
Display a list of replications for destination NAS volumes.

Format
NAS-volumes replication list-destination

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display a current list of replications for NAS volumes that are replication destinations on this cluster:
CLI> NAS-volumes replication list-destination

Output
.-------.-------.-------.--------.------.------.-------.--------.------.--------.---------.
| Volume| Source| Source| Achiev | Statu| Error| Next | Seconds| Trans|
Snapshot |Snapshot |
| Name | Cluste| Volume| ed
| s
|
| Recove| To Com | ferre|
Retention|Retention|
|
| r Name| Name | Recove |
|
| ry
| plete | d MB |
Policy
|in Days |
|
|
|
| ry
|
|
| Point |
|
|
|
|
|
|
|
| Point |
|
|
|
|
|
|
|
|-------|-------|-------|--------|------|------|-------|--------|------|--------|---------|
| volde | idffs1| volsou| 13-Aug | Idle | None |
|
|
|
Minimum | 42
|
| st
|
| rce
| -13
|
|
|
|
|
|
|
|
|
|
|
| 14:52: |
|
|
|
|
|
|
|
|
|
|
| 06
|
|
|
|
|
|
|
|
'-------'-------'-------'--------'------'------'-------'--------'------'--------|---------|

CLI Commands

149

NAS-volumes replication list-source
Display a list of replications for source NAS volumes.

Format
NAS-volumes replication list-source

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display a current list of replications for source NAS volumes:
CLI> NAS-volumes replication list-source

Output
.---------.-------------.------------.---------.------.------.---------.----------.---------.-------.---------.-------------.
| Volume | Destination | Destination| Achieved|Status| Error| Next
|
Seconds To| Transfer|Cluster|Snapshot |Snapshot
|
| Name
| Cluster Name| VolumeName | Recovery|
|
| Recovery|
Complete | red MB | Name |Retention|Retention Per|
|
| Name
|
| Point
|
|
| Point
|
|
|
|Policy
|iod in days) |
|---------|-------------|------------|---------|------|------|---------|----------|---------|-------|---------|-------------|
|volsource| idffs2
| voldest
|13-Aug-13| Idle | None |
|
|
|
|
|
|
|
|
|
| 14:52:06|
|
|
|
|
|
|
|
|
'---------'-------------'------------'---------'------'------'---------'----------'---------'-------.---------.-------------.

NAS-volumes replication modify-snapshot-retention
Modify the snapshot retention policy.

Format
NAS-volumes replication modify-snapshot-retention 
   {options}

150

CLI Commands

Arguments
Arguments

Description

Format



Source NAS volume name

Existing NAS



Destination FluidFS cluster name

Existing FluidFS cluster name



Destination NAS volume name

Existing NAS volume name



Snapshot retention policy

Options
Option

Description

Format


(default 30 days)

NAS-volumes replication promote
Description
Promote the destination NAS volume.

Format
NAS-volumes replication promote  


Arguments
Arguments

Description

Format



Source NAS volume name

Existing NAS



Destination FluidFS cluster name

Existing FluidFS cluster name



Destination NAS volume name

Existing NAS volume name

Example
Promote a destination NAS volume named voldest where the source NAS volume is named volsource
and the destination FluidFS cluster name is idffs2:
CLI> NAS-volumes replication promote volsource idffs2 voldest

NAS-volumes replication schedules add
Description
Add a schedule for replication.

CLI Commands

151

Format
NAS-volumes replication schedules add  
   {options}

Arguments
Argument

Description

Format



Source NAS volume name

Existing NAS volume name



Destination FluidFS cluster name

Existing FluidFS cluster name



Destination NAS volume name

Existing NAS volume name



Replication schedule name

Maximum of 230 characters, and
may contain letters, numbers,
and underscores



Replication schedule type

Possible values are Periodic,
SpecificTime

Option

Description

Format

-Period 

Interval between replications in
periodic policy. This option is
relevant only for ScheduleType
Periodic.

Whole positive number

-Days 

List of days in which the
Possible values are Sunday,
replication will start. This option
Monday, Tuesday, Wednesday,
is relevant only for ScheduleType Thursday, Friday, or Saturday
SpecificTime.

-Hours 

List of hours in which the
Zero-based, whole positive
replication will start. This option
number (0 to 23)
is relevant only for ScheduleType
SpecificTime.

-Minute 

Minute in which the replication
will start. This option is relevant
only for ScheduleType
SpecificTime.

Options

Zero-based, whole positive
number (0 to 59)

Example
Add a replication schedule named repsched to run on Sundays at 20:00 where the source NAS volume is
named volsource, the destination FluidFS cluster name is idffs2, and the destination NAS volume is named
voldest:
CLI> NAS-volumes replication schedules add volsource idffs2 voldest repsched
SpecificTime -Days Sunday -Hours 20

152

CLI Commands

NAS-volumes replication schedules delete
Description
Delete a replication schedule.

Format
NAS-volumes replication schedules delete  
 

Arguments
Argument

Description

Format



Source NAS volume name

Existing NAS volume name



Destination FluidFS cluster name

Existing FluidFS cluster name



Destination NAS volume name

Existing NAS volume name



Replication schedule name

Existing replication schedule
name

Example
Delete a replication schedule named resched where the source NAS volume is named volsource, the
destination FluidFS cluster name is idffs2, and the destination NAS volume is named voldest:
CLI> NAS-volumes replication schedules delete volsource idffs2 voldest repsched

NAS-volumes replication schedules edit
Description
Modify the settings for a replication schedule.

Format
NAS-volumes replication schedules edit  
  {options}

Arguments
Argument

Description

Format



Source NAS volume name

Existing NAS volume name



Destination FluidFS cluster name

Existing FluidFS cluster name



Destination NAS volume name

Existing NAS volume name



Replication schedule name

Existing replication schedule
name

CLI Commands

153

Options
Option

Description

Format

-ScheduleType 

Replication schedule type

Possible values are Periodic,
SpecificTime

-Period 

Interval between replications in
periodic policy. This option is
relevant only for ScheduleType
Periodic.

Whole positive number

-Days 

List of days in which the
Possible values are Sunday,
replication will start. This option
Monday, Tuesday, Wednesday,
is relevant only for ScheduleType Thursday, Friday, or Saturday
SpecificTime.

-Hours 

List of hours in which the
Zero-based, whole positive
replication will start. This option
number (0 to 23)
is relevant only for ScheduleType
SpecificTime.

-Minute 

Minute in which the replication
will start. This option is relevant
only for ScheduleType
SpecificTime.

Zero-based, whole positive
number (0 to 59)

Example
Modify a replication schedule named repsched to run on Sundays at 18:00 where the source NAS volume
is named volsource, the destination FluidFS cluster name is idffs2, and the destination NAS volume is
named voldest:
CLI> NAS-volumes replication schedules edit volsource idffs2 voldest repsched Days Sunday -Hours 18

NAS-volumes replication schedules list
Description
Display a list of replication schedules.

Format
NAS-volumes replication schedules list

Options
Option

Description

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

154

Format

CLI Commands

Example
Display a current list of replication schedules:
CLI> NAS-volumes replication schedules list

Output
.--------------.-------------.---------------.---------------.---------------.
| Schedule
| Volume Name | Remote
| Remote Volume | Frequency
|
| Name
|
| Cluster Name | Name
|
|
|--------------|-------------|---------------|---------------|---------------|
| repsched1
| volsource
| idffs2
| voldest
| Sunday at
|
|
|
|
|
| 20:00
|
|--------------|-------------|---------------|---------------|---------------|
| repsched2
| volsource
| idffs2
| voldest
| Every 1440
|
|
|
|
|
| minutes
|
'--------------'-------------'---------------'---------------'---------------'

NAS-volumes replication schedules view
Description
Display the settings of a replication schedule.

Format
NAS-volumes replication schedules view  
 

Arguments
Argument

Description

Format



Source NAS volume name

Existing NAS volume name



Destination FluidFS cluster name

Existing FluidFS cluster name



Destination NAS volume name

Existing NAS volume name



Replication schedule name

Existing replication schedule
name

Example
Display the settings for a replication schedule named resched1 where the source NAS volume is named
volsource, the destination FluidFS cluster name is idffs2, and the destination NAS volume is named
voldest:
CLI> NAS-volumes replication schedules view volsource
idffs2 voldest repsched1

CLI Commands

155

Output
Schedule Name
Volume Name
Remote Cluster Name
Remote Volume Name
Frequency

=
=
=
=
=

repsched1
volsource
idffs2
voldest
Sunday at 20:00

NAS-volumes replication set-QOS
Set QoS (quality of service) replication for a volume.

Format
NAS-volumes replication set-QOS  


Arguments
Argument

Description

Format



Source NAS volume name

Existing NAS volume name



Destination FluidFS cluster name

Existing FluidFS cluster name



Destination NAS volume name

Existing NAS volume name

Option

Description

Format

-SnapshotRetentionPolicy


Snapshot retention policy

Valid values are Archive,
Minimum and IdenticalToSource.
If Archive is chosen, then the
retention period in days (integer)
is used.

Options

-SnapshotRetentionPeriodInDays Snapshot retention period on

-Use QoS 

Select whether or not to use QoS Boolean: To use or not QoS

-QoS name 

Select existing QoS

QoS entity name (existing)

Example
Set QoS replication on a NAS volume named volsource:
CLI> NAS-volumes replication set-QOS volsource

156

CLI Commands

NAS-volumes replication start
Start the replication from source to destination NAS volumes.

Format
NAS-volumes replication start  


Arguments
Argument

Description

Format



Source NAS volume name

Existing NAS volume name



Destination FluidFS cluster name

Existing FluidFS cluster name



Destination NAS volume name

Existing NAS volume name

Example
Start the replication from a source NAS volume named volsource to a destination NAS volume named
voldest on a remote FluidFS cluster named idffs2:
CLI> NAS-volumes replication start volsource idffs2 voldest

NAS-volumes replication view
Display the status of replication.

Format
NAS-volumes replication view  
 

Arguments
Argument

Description

Format



Source NAS volume name

Existing NAS volume name



Destination FluidFS cluster name

Existing FluidFS cluster name



Destination NAS volume name

Existing NAS volume name



Name of existing QOS to be used Use QOS name or leave field
by replication
empty if unlimited

Example
Display the current replication status where the source NAS volume is named volsource, the destination
FluidFS cluster name is idffs2, and the destination NAS volume is named voldest:
CLI/NAS-volumes/replication> view jvol1 cplsup3 jvol1-replica

CLI Commands

157

Output
Role
= Source
Volume Name
= jvol1
Remote Cluster Name
= cplsup3
Remote Volume Name
= jvol1-replica
Achieved Recovery Point = 10-Dec-14 14:52:06
Target Recovery Point
= 10-Dec-14 14:52:06
Status
= Idle
Error
= None
Next Recovery Point
=
Seconds To Complete
=
Transferred MB
=
Snapshot Retention Policy= Archive
Snapshot Retention period in Days = 10
The amount of resources on source and destination = Same
CLI/NAS-volumes/replication>

NAS-volumes SMB-shares add
Add an SMB share to a NAS volume.

Format
NAS-volumes SMB-shares add    {options}

Arguments
Argument

Description

Format



SMB share name

Maximum length of 80
characters, and can contain
letters, numbers, and
underscores



NAS volume name

Existing NAS volume name



SMB share path in the NAS
volume

Existing path in the NAS volume

Options
Option

Description

Format

-Comment 

Comment for the SMB share

Any string

-AntiVirus 

Indicate whether the files that are
opened from this SMB share must
pass an antivirus check

Possible values are Yes, No

-EnableAvExtensionsFilters


Indicate whether to exclude
specified file extensions from
antivirus scanning

Possible values are Yes, No

-AvExtensions 

File extensions to exclude from
antivirus scanning

Any string

158

CLI Commands

Option

Description

Format

-EnableAvExcludeDirsFilters


Indicate whether to exclude
specified directories from antivirus
scanning

Possible values are Yes, No

-AvExcludeDirs 

Directories to exclude from
antivirus scanning

Any string

-AvMaxFileSizeForScanning


Maximum size of files that will be
sent for antivirus scanning

Floating point number with
suffix of units (for example,
100MB)

-AvDenyAccessLargeUnscannedFiles


Indicate whether access to files
larger than the defined size will be
denied

Possible values are Yes, No

-AccessBasedEnumeration


Defines whether access-based
share enumeration is active

Possible values are Yes, No

-RequireMessageEncryption


Defines whether traffic while
connected to this share is required
to be encrypted

-EnableExtensionsFilter


Enable file extension filtering

-ExtensionsFilter 

List of file extensions that are
prohibited for creation or renaming
on share

Enable file extension filter exclude
EnableExtensionsFilterExcludeGroups groups list

-EnableContinuousAvailability


Indicate if the continuous
availability feature is enabled on
the share. Continuous availability
features track file operations on a
highly available file share so that
clients can fail over to another
node of the cluster without
interruption.

Example
Add an SMB share named share to a NAS volume named vol1 at the path /folder1:
CLI> NAS-volumes SMB-shares add share vol1 /folder1

CLI Commands

159

NAS-volumes SMB-shares add-exclude-group
Add an exclude group for extensions filter of an SMB share.
Members of this group are not restricted in the types of files they can save on the SMB share.

Format
NAS volumes SMB-shares add-exclude-group   

Arguments
Argument

Description



SMB share name



Group domain. The available
domains are displayed by the
domains-list command.



Local group name

Format

Contains only the following
characters: letters, numbers,
underscores, hyphens, spaces,
and periods. A period cannot be
used as the last character of the
account name.

NAS volumes SMB-shares add-share-level-permission
Add share-level permission to an SMB share.

Format
NAS volumes SMB-shares add-share-level-permission  
  

Arguments
Argument

Description



SMB share name



Account domain. The available
domains are displayed by the
domains-list command.



Account name



Indicate whether this share-level
permission allows or denies
operation.

Possible values are Allow, Deny



Permission type

Possible values are Change,
FullControl, Read

160

Format

CLI Commands

NAS-volumes SMB-shares create-folder
Create a folder in a volume.
This folder can then be used for an SMB share.

Format
NAS-volumes SMB-shares create-folder  


Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Parent folder under the NAS
volume

Existing parent folder



Name of the new folder

Less than 255 characters and
cannot contain the following
characters: < > " \ | ? *. Also, the
path cannot include ., .., and so
on.

Example
Create /folder1 on a NAS volume named vol1:
CLI> NAS-volumes SMB-shares create-folder vol1 / folder1

NAS-volumes SMB-shares delete
Delete an SMB share.

Format
NAS-volumes SMB-shares delete 

Arguments
Argument

Description

Format



SMB share name

Existing SMB share name

Example
Delete an SMB share named share1:
CLI> NAS-volumes SMB-shares delete share1

CLI Commands

161

NAS-volumes SMB-shares delete-exclude-group
Delete exclude group for extensions filter of SMB share.
After executing this command, members of this group will have to conform to the restrictions on which
types of files can be written to the volume. Only new writes or renames by group members are affected.

Format
NAS volumes SMB-shares delete-exclude-group  


Arguments
Argument

Description



SMB share name



Group domain. The available
domains are displayed by
domains-list command.



Local group name

Format

Contains only the following
characters: letters, numbers,
underscores, hyphens, spaces,
and periods. A period cannot be
used as the last character of the
account name.

NAS-volumes SMB-shares delete-share-level-permission
Delete share-level permission from an SMB share.

Format
NAS volumes SMB-shares delete-share-level-permissions 
 

Arguments
Argument

Description



SMB share name



Account domain. The available
domains are displayed by the
domains-list command



Account name

162

Format

CLI Commands

NAS-volumes SMB-shares delete-share-level-permissionby-sid
Delete share-level permission from SMB share by SID.

Format
NAS volumes SMB-shares delete-share-level-permission-by-sid  

Arguments
Argument

Description



SMB share name



Share ID

Format

NAS-volumes SMB-shares edit
Modify SMB share settings.

Format
NAS-volumes SMB-shares edit  {options}

Arguments
Argument

Description

Format



SMB share name

Existing SMB share name

Option

Description

Format

-Comment 

Comment for the SMB share

Any string

-AntiVirus 

Indicate whether the files that are Possible values are Yes,
opened from this SMB share must No
pass an anti-virus check

-EnableAvExtensionsFilters


Indicate whether to exclude
specified file extensions from
antivirus scanning

Possible values are Yes,
No

-AvExtensions 

File extensions to exclude from
antivirus scanning

Any string

-EnableAvExcludeDirsFilters


Indicate whether to exclude
Possible values are Yes,
specified directories from antivirus No
scanning

Options

CLI Commands

163

Option

Description

Format

-AvExcludeDirs 

Directories to exclude from
antivirus scanning

Any string

-AvMaxFileSizeForScanning


Maximum size of files that will be
sent for antivirus scanning

Floating point number
with suffix of units (for
example, 100MB)

-AvDenyAccessLargeUnscannedFiles


Indicate whether access to files
Possible values are Yes,
larger than the defined size will be No
denied

-AccessBasedEnumeration


Defines whether access-based
share enumeration is active

-RequireMessageEncryption


Defines whether traffic is required
to be encrypted while connected
to this share

-EnableExtensionsFilter


Enable file extension filtering

-ExtensionsFilter 

List of file extensions that are
prohibited from creation or
renaming on a share

-EnableExtensionsFilterExcludeGroups


Enable file extensions filter
exclude group list

-EnableContinuousAvailability

Indicate if the continuous
availability feature is enabled on
the share. Continuous availability
features track file operations on a
highly available file share so that
clients can fail over to another
node of the cluster without
interruption.

-EnableBranchCache

Enables branch cache on a share

-BranchCacheExtensionsFilter

List of file name extensions

-BranchCacheExtensionsFilterType

Filter type

Possible values are Yes,
No

Possible values are
Exclude, None

Example
Enable antivirus scanning on an SMB share named share and exclude .docx files from antivirus scanning:
CLI> NAS-volumes SMB-shares edit share -AntiVirus Yes EnableAvExtensionsFilters Yes -AvExtensions docx

164

CLI Commands

NAS-volumes SMB-shares general-settings view
Display the general settings for the SMB protocol.

Format
NAS-volumes SMB-shares general-settings view

Example
Display the current general settings for the SMB protocol:
CLI> NAS-volumes SMB-shares general-settings view

Output
Local Accounts Password Never Expires
Local Accounts Max Password Age
Check Password Complexity
Is Required Message Signed
Is Required Message Encryption
Maximum SMB version Restriction
Force leases restriction (Yes = leases disabled)
Force oplocks restricion (Yes = oplocks disabled)

=
=
=
=
=
=
=
=

No
6 Weeks
Yes
No
No
SMB-v3
No
No

NAS-volumes SMB-shares home-share disable
Disable SMB home shares on a NAS volume.

Format
NAS-volumes SMB-shares home-share disable

NAS-volumes SMB-shares home-share edit
Modify the SMB home shares settings.

Format
NAS-volumes SMB-shares home-share edit {options}

Options
Option

Description

-AntiVirusCheck 

Indicate whether the files that are Possible values are
opened from this SMB share must Yes, No
pass an antivirus check

-EnableAvExtensionsFilters


Indicate whether to exclude
specified file extensions from
antivirus scanning

CLI Commands

Format

Possible values are
Yes, No

165

Option

Description

Format

-AvExtensions 

File extensions to exclude from
antivirus scanning

Any string

-EnableAvExcludeDirsFilters


Indicate whether to exclude
Possible values are
specified directories from antivirus Yes, No
scanning

-AvExcludeDirs 

Directories to exclude from
antivirus scanning

Any string

-AvMaxFileSizeForScanning


Maximum size of files that will be
sent for antivirus scanning

Floating point
number with suffix
of units (for
example, 100MB)

-AvDenyAccessLargeUnscannedFiles


Indicate whether access to files
Possible values are
larger than the defined size will be Yes, No
denied

-AccessBasedEnumeration


Defines whether access-based
share enumeration is active

-RequireMessageEncryption


Defines whether SMB3 traffic is
required to be encrypted while
connected to home shares

-EnableExtensionsFilter


Enable the extension filter

-ExtensionsFilter 

List of file extensions that are
prohibited for creation or
renaming of a file on the share

-EnableExtensionsFilterExcludeGroups


Enable file extension filter exclude
group list

-EnableHomeShareAutoCreation


Home folder can be created
automatically, if it does not exist
already, during the first login of
the user

-EnableContinuousAvailability


Indicate if the continuous
availability feature is enabled on
the share. Continuous availability
features track the operations on a
highly available file share so that
clients can fail over to another
node of the cluster without
disconnection.

Possible values are
Yes, No

Example
Disable antivirus scanning on SMB home shares:
CLI> NAS-volumes SMB-shares home-share edit -AntiVirusCheck No

166

CLI Commands

NAS-volumes SMB-shares home-share enable
Enable SMB home shares on a NAS volume.

Format
NAS-volumes SMB-shares home-share enable  


Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

-PathPrefix 

Prefix of the SMB home shares

Existing path

-PathTemplate 

Template of the SMB home
shares

Possible values are path-prefix/
domain/user-name, path-prefix/
user-name

Example
Enable SMB home shares on a NAS volume named vol1 at the path /users/:
CLI> NAS-volumes SMB-shares home-share enable vol1 /users path-prefix/user-name

NAS-volumes SMB-shares home-share view
Display SMB home shares settings.

Format
NAS-volumes SMB-shares home-share view

Example
Display SMB home shares settings:
CLI> NAS-volumes/SMB-shares/home-share> view

Output
Volume Name
Path Prefix
Path Template
Enabled
Antivirus Check
Enable Antivirus Extensions Filters
Antivirus Extensions Filters
Enable Antivirus Exclude Dirs Filters
Antivirus Exclude Dirs Filters
Antivirus Max File Size for Scanning
Antivirus Deny Access Large Unscanned
Access Based Enumeration

CLI Commands

=homes
= /
= path-prefix/user-name
= Yes
= No
= No
=
= No
=
= 1.46GB
Files = Yes
= No

167

Is Required Message Encryption
= No
Enable file extension filter
= No
Deny creation of files with these extensions =
Enable excluding groups from file extension filter = No
Allow creation of any file to
= .--------------.-------------.
|Group Domain | Group Name |
.--------------.-------------.
|
|
|
.--------------.-------------.
Enable automatic home folder creation = Yes
Contionuous availability for file handles = No

NAS-volumes SMB-shares list
Display a list of SMB shares.

Format
NAS-volumes SMB-shares list {options}

Options
Option

Description

Format

-VolumeName 

NAS volume name

Existing NAS volume name

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display a current list of the SMB shares on a NAS volume named vol1:
CLI> NAS-volumes SMB-shares list -VolumeName vol1

Output
.------------.-------------.----------.-----------.
| Share Name | Volume Name | Path
| Antivirus |
|------------|-------------|----------|-----------|
| share
| vol2
| /folder1 | No
|
'------------'-------------'----------'-----------'

NAS-volumes SMB-shares view
Display SMB share settings.

Format
NAS-volumes SMB-shares view 

168

CLI Commands

Arguments
Argument

Description

Format



SMB share name

Existing SMB share name

Example
Display the current settings for an SMB share named share:
CLI> NAS-volumes SMB-shares view share

Output
Volume Name
= vol2
Share Name
= jshare1
Path
= /folder1
Comment
=
Antivirus
= No
Enable Antivirus Extensions Filters
= No
AvExtensions
=
Enable Antivirus Exclude Dirs Filters
= No
AvExcludeDirs
=
Antivirus Max File Size For Scanning
= 1.46 GB
Antivirus Deny Access Large Unscanned Files = Yes
Access Based Enumeration
= No
Require Message Encryption
= No
Share Level Permissions
Deny creation of files with these extensions =
Enable excluding groups from file extension filter = No
Allow creation of any file to
= .--------------.-------------.
|Group Domain | Group Name |
.--------------.-------------.
|
|
|
.--------------.-------------.
Enable automatic home folder creation = Yes
Contionuous availability for file handles = No

NAS-volumes snapshots add
Add a snapshot for a NAS volume.

Format
NAS-volumes snapshots add  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Snapshot name

Maximum length of 230
characters, and can contain
letters, numbers, spaces, and
underscores. Control characters,

CLI Commands

169

Argument

Description

Format
commas, and so on are not
allowed.

Example
Add a snapshot named snap1 for a NAS volume named vol1:
CLI> NAS-volumes snapshots add vol1 snap1

NAS-volumes snapshots delete
Delete a snapshot from a NAS volume.

Format
NAS-volumes snapshots delete  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Snapshot name

Existing snapshot name

Example
Delete a snapshot named snap1 from a NAS volume named vol1:
CLI> NAS-volumes snapshots delete vol1 snap1

NAS-volumes snapshots disable-expiry
Disable a snapshot expiration date.

Format
NAS-volumes snapshots disable-expiry  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Snapshot name

Existing snapshot name

Example
Disable a snapshot expiration date for a snapshot named snap1on a NAS volume named vol1:
CLI> NAS-volumes snapshots disable-expiry vol1 snap1

170

CLI Commands

NAS-volumes snapshots list
Display a list of snapshots.

Format
NAS-volumes snapshots list 

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display a list of the current snapshots on a NAS volume named vol1:
CLI> NAS-volumes snapshots list vol1

Output
.-------------.---------------.--------------------.
| Volume Name | Snapshot Name | Created At
|
|-------------|---------------|--------------------|
| vol1
| snap1
| 13-Aug-13 10:03:18 |
|-------------|---------------|--------------------|
| vol1
| snap2
| 13-Aug-13 10:03:30 |
'-------------'---------------'--------------------'

NAS-volumes snapshots rename
Rename a snapshot on a NAS volume.

Format
NAS-volumes snapshots rename   

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Existing snapshot name

Existing snapshot name



New snapshot name

Maximum length of 230
characters, and can contain
letters, numbers, spaces, and
underscores. Control characters,

CLI Commands

171

Argument

Description

Format
commas, and so on are not
allowed.

Example
Rename a snapshot named snap1 to snapa on a NAS volume named vol1:
CLI> NAS-volumes snapshots rename vol1 snap1 snapa

NAS-volumes snapshots restore
Restore a NAS volume to a snapshot.
NOTE: All data written to the volume after the snapshot was taken will be deleted from the volume.

Format
NAS-volumes snapshots restore  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Snapshot name

Existing snapshot name

Example
Restore a NAS volume named vol1 to a snapshot named snap1:
CLI> NAS-volumes snapshots restore vol1 snap1

NAS-volumes snapshots schedules add
Add a snapshot schedule to a NAS volume.

Format
NAS-volumes snapshots schedules add    {options}

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Snapshot schedule name

Length must be less than 230
characters



Snapshot schedule type

Possible values are Periodic,
SpecificTime

172

CLI Commands

Options
Option

Description

Format

-EnableRetention


Indicate whether the retention
policy is enabled

Possible values are Yes, No

-RetentionPeriod


Retention period of snapshots
created by this policy

An integer number with suffix of
units H/D/W (hours, days, or
weeks) (for example, 10H)

-Period 

Interval between snapshots in
periodic policy. This option is
relevant only for ScheduleType
Periodic.

Whole positive number (in
minutes)

-Days 

List of days on which the
snapshots should be taken. This
option is relevant only for
ScheduleType SpecificTime.

Comma-separated list of days.
Possible values are Sunday,
Monday, Tuesday, Wednesday,
Thursday, Friday, or Saturday

-Hours 

List of hours at which the
snapshots should be taken. This
option is relevant only for
ScheduleType SpecificTime.

Comma-separated list of hours.
Zero-based, whole positive
number (0 to 23).

-Minute 

Minute at which the snapshots
should be taken. This option is
relevant only for ScheduleType
SpecificTime.

Zero-based, whole positive
number (0 to 59)

Example
Add a snapshot schedule named snapsched1 on a NAS volume named vol1 to take snapshots once a day
and retain them for 7 days:
CLI> NAS-volumes snapshots schedules add vol1 snapsched1 Periodic -Period 1440 EnableRetention Yes -RetentionPeriod 7D

NAS-volumes snapshots schedules delete
Delete a snapshot schedule from a NAS volume.

Format
NAS-volumes snapshots schedules delete  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Snapshot schedule name

Existing snapshot schedule name

CLI Commands

173

Example
Delete a snapshot schedule named snapsched1 from a NAS volume named vol1:
CLI> NAS-volumes snapshots schedules delete vol1 snapsched1

NAS-volumes snapshots schedules edit
Modify a snapshot schedule.

Format
NAS-volumes snapshots schedules edit   {options}

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Snapshot schedule name

Existing snapshot schedule name

Option

Description

Format

-EnableRetention


Indicate whether the retention
policy is enabled

Possible values are Yes, No

-RetentionPeriod


Retention period of snapshots
created by this policy

An integer number with suffix of
units H/D/W (hours, days, or
weeks) (for example, 10H)

-Period 

Interval between snapshots in
periodic policy. This option is
relevant only for ScheduleType
Periodic.

Whole positive number (in
minutes)

-ScheduleType 

List of days on which the
snapshots should be taken. This
option is relevant only for
ScheduleType SpecificTime.

Possible values are Periodic,
SpecificTime

-Days 

List of hours at which the
snapshots should be taken. This
option is relevant only for
ScheduleType SpecificTime.

Comma-separated list of days.
Possible values are Sunday,
Monday, Tuesday, Wednesday,
Thursday, Friday, or Saturday

-Hours 

Minute at which the snapshots
should be taken. This option is
relevant only for ScheduleType
SpecificTime.

Comma-separated list of hours.
Zero-based, whole positive
number (0 to 23).

Options

174

CLI Commands

Option

Description

Format

-Minute 

Interval between snapshots in
periodic policy. This option is
relevant only for ScheduleType
Periodic.

Zero-based, whole positive
number (0 to 59)

Example
Modify a snapshot schedule named snapsched1 on a NAS volume named vol1 to retain snapshots for 12
hours:
CLI> NAS-volumes snapshots schedules edit vol1 snapsched1 -EnableRetention Yes RetentionPeriod 12H

NAS-volumes snapshots schedules list
Display a list of snapshot schedules.

Format
NAS-volumes snapshots schedules list [options]

Options
Option

Description

Format

-CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

-VolumeName 

NAS volume name

Example
Display a current list of snapshot schedules on a NAS volume named vol1:
CLI> NAS-volumes snapshots schedules list -VolumeName vol1

Output
.--------------.-------------.---------------.---------------.---------------.
| Schedule
| Volume Name | Enable
| Retention
| Frequency
|
| Name
|
| Retention
| Period
|
|
|--------------|-------------|---------------|---------------|---------------|
| snapsched1
| vol1
| Yes
| 1 Weeks
| Every 1440
|
|
|
|
|
| minutes
|
|--------------|-------------|---------------|---------------|---------------|
| snapsched2
| vol1
| Yes
| 1 Weeks
| Sunday at
|
|
|
|
|
| 20:00
|
'--------------'-------------'---------------'---------------'---------------'

CLI Commands

175

NAS-volumes snapshots schedules view
Display snapshot schedule settings.

Format
NAS-volumes snapshots schedules view  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Snapshot schedule name

Existing snapshot schedule name

Example
Display the current settings for a snapshot schedule named snapsched1 on a NAS volume named vol1:
CLI> NAS-volumes snapshots schedules view vol1 snapsched1

Output
Schedule Name
Volume Name
Enable Retention
Retention Period
Frequency

=
=
=
=
=

snapsched1
vol1
Yes
1 Weeks
Every 1440 minutes

NAS-volumes snapshots set-expiry
Set a snapshot expiration date.

Format
NAS-volumes snapshots set-expiry   

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Snapshot name

Existing snapshot name



Snapshot expiration date

"DD-MMM-YY HH:MI:SS" (double
quotation marks are required)

176

CLI Commands

Example
Set a snapshot expiration date of 25-Aug-13 23:09:34 for a snapshot named snap1 on a NAS volume
named vol1:
CLI> NAS-volumes snapshots set-expiry vol1 snap1 "25-Aug-13 23:09:34"

NAS-volumes snapshots view
Display snapshot information.

Format
NAS-volumes snapshots view  

Arguments
Argument

Description

Format



NAS volume name

Existing NAS volume name



Snapshot name

Existing snapshot name

Example
Display current information for a snapshot named snap1 on a NAS volume named vol1:
CLI> NAS-volumes snapshots view vol1 snap1

Output
Volume Name
Snapshot Name
Created At
Has Expiry
Expiry

=
=
=
=
=

vol1
snap1
13-Aug-13 10:03:18
No

networking client-load-balancing list-sessions-ofconnection
Display sessions of connection.

Format
networking client-load-balancing list-sessions-of-connection 


CLI Commands

177

Arguments
Argument

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header



Client or router IP address

Existing client or router IP
address in IPv6 or IPv4 format



Client VIP to which the client or
router was accessed

Existing client VIP IP address in
IPv6 or IPv4 format

Example
Display sessions of connection with the IP address 172.22.69.18 using client VIP 172.22.69.32:
CLI> networking client-load-balancing list-sessions-of-connection 172.22.69.18
172.22.69.32 1

Output
.-------.-------.------------.--------.-------.------.-------.-------.------.
| Protoc| Contro| NFS Session|User
| Comput| #
|Connec | Idle | Guest|
| ol
| ller | Id
|
| er
| Open |ted
| Time |
|
|
| Id
|
|
|
| Files|Time
|
|
|
|-------|-------|------------|--------|-------|------|-------|-------|------|
|SMB 3.0| 0
| N/A
|IDC\jona| 10.48 |
2 |21:14: | 19:00:| No
|
|
|
|
|thans
| 29.76|
| 16
|12
|
|
|-------|-------|------------|--------|-------|------|-------|--- ---|------|

networking active-ndmp-sessions list
Display a list of active NDMP sessions (jobs).

Format
networking active-ndmp-sessions list

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display the current list of active NDMP sessions (jobs):
CLI> networking active-ndmp-sessions list

178

CLI Commands

Output
.-----------.---------.----------.--------------.----------.-------------------.
| Controller| Session | Session | DMA IP
| Session | Session Start Time|
| Id
| Id
| Type
|
| Path
|
|
|-----------|---------|----------|--------------|----------|-------------------|
| 1
| 151691 | Restore | 172.41.200.70| /volume2 | 03-Jun-13 11:25:14|
'-----------'---------'----------'--------------'----------'-------------------'

networking active-ndmp-sessions logoff
Abort an active NDMP session.

Format
networking active-ndmp-sessions logoff  

Arguments
Argument

Description

Format



ID of the NAS controller to which Existing NAS controller ID
the DMA session is connected



NDMP session (job) ID

Existing NDMP session (job) ID

Example
Abort an active NDMP session (job) with the job ID 151691 running on NAS controller 1:
CLI> networking active-ndmp-sessions logoff 1 151691

networking active-ndmp-sessions view
Display information about an active NDMP session (job).

Format
networking active-ndmp-sessions view  

Arguments
Argument

Description



ID of the NAS controller to which Existing NAS controller ID
the DMA session is connected



NDMP session (job) ID

CLI Commands

Format

Existing NDMP session (job) ID

179

Example
Display information about an active NDMP session (job) on NAS controller 1 with the job ID 150471:
CLI> networking active-ndmp-sessions view 1 150471

Output
Controller ID
Session ID
Session Type
DMA IP
Session Path
Session Start Time

=
=
=
=
=
=

1
150471
Backup
172.41.200.70
/volume2
03-Jun-13 11:17:25

networking active-view-NFS-sessions
Display information about an active NFS session.

Format
networking active-sessions view-NFS-session 

Arguments
Argument

Description



ID of the NFS session

Format

Example
Display information about an active NFS session for the user idffs2\user1 on the computer win2k8dm380.lab.town using NAS controller 1:
CLI> networking active-sessions view-NFS-session
1-5-27907-2049-4-172.1234-172.41.2.225

Output
Protocol
Controller ID
NFS Session ID
Computer
Number Open Files
Connected Time
Idle Time
Guest

180

=
=
=
=
=
=
=
=

NFS 4
1
1-5-27907-2049-4-172.1234-172.41.2.225
172.41.200.123
0
32:42:58
00:00:00
No

CLI Commands

networking active-sessions list-idle-sessions
Display a list of active SMB and NFS sessions.

Format
networking active-sessions list-idle-sessions {options}

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

-FilterByIdleTimeMin


Displays only the sessions idle for Integer, in minutes (2880 or
longer than the specified number larger)
of minutes

Example
Display a list of the current active sessions:
CLI> networking active-sessions list-idle-session 2880

Output
.--------.--------.--------------.--------.--------.--------.--------.-------.
| Protoc | Contro | User
| Comput | Number |Connec | Idle
| Guest |
| ol
| ller
|
| er
| Open
|ted
| Time
|
|
|
| Id
|
|
| Files |Time
|
|
|
|--------|--------|--------------|--------|--------|--------|--------|-------|
|SMB
| 0
| idffs1\user1 | ::ffff | 1
|00:14: | 00:14: | No
|
|
|
|
| :172.2 |
|16
| 16
|
|
|
|
|
| 2.69.1 |
|
|
|
|
|
|
|
| 8
|
|
|
|
|
'--------'--------'--------------'--------'--------'--------'--------'-------'

networking active-sessions list-sessions-with-manyopen-files
Display a list of SMB and NFS sessions with many open files.

Format
networking active-sessions list-sessions-with-many-open-files


CLI Commands

181

Arguments
Argument

Description

Format

-FilterByOpenFIles


Displays sessions with a number Integer (50 or larger)
of open files larger than specified
value

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display a list of sessions with many open files:
CLI> networking active-sessions list-sessions-with-many-open-files

Output
.----------.--------.--------------.--------.--------.-------.--------.-------.
| Protoc
| Contro | User
| Comput | Number |Connec | Idle
| Guest |
| ol
| ller
|
| er
| Open
|ted
| Time
|
|
|
| Id
|
|
| Files |Time
|
|
|
|----------|--------|--------------|--------|--------|-------|--------|-------|
|SMB
| 0
| idffs1\user1 | ::ffff | 52
|00:14: | 00:00: | No
|
|
|
|
| :172.2 |
|16
| 00
|
|
|
|
|
| 2.69.18|
|
|
|
|
'----------'--------'--------------'--------'--------'-------'--------'-------'

networking active-sessions logoff-NFS-sessions
Disconnect an active NFS session.

Format
networking active-sessions logoff-NFS-session {options}

Options
Option

Description

-ControllerID 

ID of the NAS controller to which Existing NAS controller ID
the session is connected

-ClientComputerName


Computer name from where the
session was established

182

Format

Existing computer name or IP
address in IPv6 or IPv4 format

CLI Commands

Example
Disconnect an active NFS session for session 150471 on the computer win2k8d-m380.lab.town using
NAS controller 1:
CLI> networking active-sessions logoff-NFS-sessions logoff -ClientComputerName
1 win2k8d-m380.lab.town

networking active-sessions logoff-NFS-session-by-ID
Disconnect an active NFS session by session ID.

Format
networking active-sessions logoff-NFS-session 

Arguments
Argument

Description

Format



ID of the connected NFS session

Existing session ID

Example
Disconnect an active NFS session with an ID of 150471:
CLI> networking active-sessions logoff-NFS-session 150471

networking active-sessions logoff-SMB-sessions
Disconnect an active SMB session.

Format
networking active-sessions logoff-SMB-sessions {options}

Options
Option

Description

-ControllerID 

ID of the NAS controller to which Existing NAS controller ID
the session is connected

-ClientComputerName


Computer name from where the
session was established

Existing computer name or IP
address in IPv4 or IPv6 format

-UserName 

User name that established the
session

Existing user name

CLI Commands

Format

183

Example
Disconnect an active SMB session for the user idffs2\user1 on the computer win2k8d-m380.lab.town
using NAS controller 1:
CLI> networking active-sessions logoff-SMB-sessions -ClientComputerName 1
win2k8d-m380.lab.town -UserName idffs2\user1

networking active-sessions logoff-SMB-session-by-ID
Disconnect an active SMB session by session ID.

Format
networking active-sessions logoff-SMB-session 

Arguments
Argument

Description

Format



ID of the connected SMB session Existing session ID

Example
Disconnect an active SMB session with an ID of 150471:
CLI> networking active-sessions logoff-SMB-session 150471

networking active-sessions list
Display a list of active sessions.

Format
networking active-sessions list {options}

Options
Option

Description

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

-list

Displays a list of active SMB and
NFS sessions

-FilterByUserName


Displays only the sessions
matching specified user name

184

Format

CLI Commands

Example
Display a list of the current active sessions:
CLI> networking active-sessions list

Output
.--------.-------.-------------.----------.------.-----.-------.--------.-----.
|Protoc | Contro| NFS Session |User
| Comput| #
|Connec| Idle
|Guest|
|ol
| ller | Id
|
| er
| Open |ted
| Time
|
|
|
| Id
|
|
|
| Files|Time |
|
|
|-------|-------|-------------|----------|-------|------|------|--- ----|-----|
|SMB 3.0| 0
| N/A
| IDC\jona | 10.48.|
1 |21:14:| 19:00: | No |
|
|
|
| thans
| 29.76|
| 16 |12
|
|
|-------|-------|-------------|----------|-------|------|------|--- ----|-----|
|NFS 4 | 1
| 1-5-27907-20|cplsup3\AB|172.41.|
0 |95.23.|00.00.05| No |
|-------|-------|-------------|----------|-------|------|------|--- ----|-----|

networking active-sessions view-SMB-session
Display information about an active SMB session.

Format
networking active-sessions view-SMB-session   

Arguments
Argument

Description

Format



ID of the NAS controller to which Existing NAS controller ID
the session is connected



User name that established the
session

Existing user name



Computer name from where the
session was established

Existing computer name or IP
address in IPv6 or IPv4 format

Example
Display information about an active SMB session for the user idffs2\user1 on the computer win2k8dm380.lab.town using NAS controller 1:
CLI> networking active-SMB-sessions view 1 idffs2\user1 win2k8d-m380.lab.town

Output
Protocol
Controller ID
User
Computer
# Open Files = 0
Connected Time

CLI Commands

=
=
=
=

SMB
1
idffs2\user1
::ffff:172.22.69.18

= 32:42:58

185

Idle Time
Guest

= 00:00:00
= No

networking client-load-balancing list
Display a list of clients on the same subnet as the FluidFS cluster (in other words, clients in a flat network)
and routers.
Clients that access the FluidFS cluster through a router cannot be listed. From the perspective of the
FluidFS cluster, it appears that the communication is directly with the router.

Format
networking client-load-balancing list

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display the current clients and routers:
CLI> networking client-load-balancing list

Output
.-------.-------.--------.--------.--------.--------.-------.-------.--------.
| Clien | Acces | Curren | Curren | Assign | Pinned| Pinne | Proto | Manual |
| t IP | s IP | t
| t
| ed
| Contro| d
| col
| Failba |
|
|
| Contro | Interf | Contro | ller | Inter |
| ck Is |
|
|
| ller
| ace
| ller
| ID
| face |
| Requir |
|
|
| ID
|
| ID
|
|
|
| ed
|
|-------|-------|--------|--------|--------|-------|-------|-------|--------|
| 172.2 | 172.2 | 0
| eth1
| 0
|
|
| Other | No
|
| 2.69. | 2.69. |
|
|
|
|
|
|
|
| 1
| 40
|
|
|
|
|
|
|
|
|-------|-------|--------|--------|--------|-------|-------|-------|--------|
| 172.2 | 172.2 | 0
| eth0
| 0
|
|
| SMB
| No
|
| 2.69. | 2.69. |
|
|
|
|
|
|
|
| 18
| 40
|
|
|
|
|
|
|
|
'-------'-------'--------'--------'--------'-------'-------'-------'--------'

186

CLI Commands

networking client-load-balancing list-sessions-ofconnection
Display sessions of connection.

Format
networking client-load-balancing list-sessions-of-connection 


Arguments
Argument

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header



Client or router IP address

Existing client or router IP
address in IPv6 or IPv4 format



Client VIP to which the client or
router was accessed

Existing client VIP IP address in
IPv6 or IPv4 format

Example
Display sessions of connection with the IP address 172.22.69.18 using client VIP 172.22.69.32:
CLI> networking client-load-balancing list-sessions-of-connection 172.22.69.18
172.22.69.32 1

Output
.-------.-------.------------.--------.-------.------.-------.-------.------.
| Protoc| Contro| NFS Session|User
| Comput| #
|Connec | Idle | Guest|
| ol
| ller | Id
|
| er
| Open |ted
| Time |
|
|
| Id
|
|
|
| Files|Time
|
|
|
|-------|-------|------------|--------|-------|------|-------|-------|------|
|SMB 3.0| 0
| N/A
|IDC\jona| 10.48 |
2 |21:14: | 19:00:| No
|
|
|
|
|thans
| 29.76|
| 16
|12
|
|
|-------|-------|------------|--------|-------|------|-------|--- ---|------|

networking client-load-balancing mass-failback
Move all clients back to their preferred NAS controller.
NOTE: Clients that are moved between controllers will experience a brief disconnection.

Format
networking client-load-balancing mass-failback

CLI Commands

187

networking client-load-balancing mass-rebalance
Rebalance all the clients between the NAS controllers.
NOTE: Clients that are moved between controllers will experience a brief disconnection.

Format
networking client-load-balancing mass-rebalance

networking client-load-balancing move
Move a client or router to a required NAS controller.

Format
networking client-load-balancing move   

Arguments
Argument

Description

Format



Client or router IP address

Existing client or router IP
address in IPv6 or IPv4 format



Client VIP to which the client or
router was accessed

Existing client VIP IP address in
IPv6 or IPv4 format



ID of the NAS controller to which Existing NAS controller ID
to move the client

Example
Move a client with the IP address 172.22.69.18 using client VIP 172.22.69.32 to controller 1:
CLI> networking client-load-balancing move 172.22.69.18 172.22.69.32 1

networking client-load-balancing pin
Pin a client or router to an assigned NAS controller.

Format
networking client-load-balancing pin   
{options}

188

CLI Commands

Arguments
Argument

Description

Format



Client or router IP address

Existing client or router IP
address in the format: x.x.x.x



Client VIP to which the client or
router was accessed

Existing client VIP IP address in
the format: x.x.x.x



ID of the NAS controller to which Existing NAS controller ID
to pin the client

Options
Option

Description

Format

-NetworkInterface


Network interface to which to pin Existing Ethernet interface in the
the client
format: ethXX (for example,
eth30) or bond1

Example
Pin a client with the IP address 172.22.69.18 using client VIP 172.22.69.32 to NAS controller 1:
CLI> networking client-load-balancing pin 172.22.69.18 172.22.69.32 1

networking client-load-balancing unpin
Unpin a client or router from the assigned NAS controller.

Format
networking client-load-balancing unpin  

Arguments
Argument

Description

Format



Client or router IP address

Existing client or router IPv6 or
IPv4 address



Client VIP to which the client or
router was accessed

Existing client VIP IPv6 or IPv4
address

Example
Unpin a client with the IP address 172.22.69.18 using client VIP 172.22.69.32 from the assigned NAS
controller:
CLI> networking client-load-balancing unpin 172.22.69.18 172.22.69.32

CLI Commands

189

networking client-load-balancing view
Display information about a client on the same subnet as the FluidFS cluster (in other words, a client in a
flat network) or a router.
Clients that access the FluidFS cluster through a router cannot be viewed. From the perspective of the
FluidFS cluster, it appears that the communication is directly with the router.

Format
networking client-load-balancing view  

Arguments
Argument

Description

Format



Client or router IP address

Existing client or router IP
address in IPv6 or IPv4 format



Client VIP to which the client or
router was accessed

Existing client VIP IP address in
IPv6 or IPv4 format

Example
Display information for a client with the IP address 172.22.69.18 using the client VIP 172.22.69.40:
CLI> networking client-load-balancing view 172.22.69.18 172.22.69.40

Output
Client IP
Access IP
Current Controller ID
Current Interface
Assigned Controller ID
Pinned Controller ID
Pinned Interface
Protocol
Is Required Manual Failback

=
=
=
=
=
=
=
=
=

172.22.69.18
172.22.69.40
0
eth0
0
SMB
No

networking client-network-interface edit
Modify the settings of the client network interface.

Format
networking client-network-interface edit {options}

190

CLI Commands

Options
Option

Description

Format

-Mode 

Bonding module type of the
client network interface

Possible values are ALB, LACP

-MTU 

MTU of the client network
interface

Whole positive number (1 to
9000)

Example
Change the mode of the client network interface to LACP:
CLI> networking client-network-interface edit -Mode LACP

networking client-network-interface view
Display the settings of the client network interface.

Format
networking client-network-interface view

Example
View the current settings of the client network interface:
CLI> networking client-network-interface view

Output
Mode = ALB
MTU = 1500

networking default-gateway add
Add a default gateway. Only one default gateway can be defined.

Format
networking default-gateway add 

Arguments
Argument

Description

Format



Default gateway IP address

IP address in IPv6 or IPv4 format

CLI Commands

191

Example
Add a default gateway with the IP address 172.22.69.1:
CLI> networking default-gateway add 172.22.69.1

networking default-gateway delete
Delete the default gateway.

Format
networking default-gateway delete

Example
Delete the current default gateway:
CLI> networking default-gateway delete

networking default-gateway edit
Modify the default gateway.

Format
networking default-gateway edit 

Arguments
Argument

Description

Format



Default gateway IP address

IP address in IPv6 or IPv4 format

Example
Change the default gateway to IP address 172.22.69.2:
CLI> networking default-gateway edit 172.22.69.2

networking default-gateway view
Display default gateway settings.

Format
networking default-gateway view

192

CLI Commands

Example
View the current default gateway:
CLI> networking default-gateway view

Output
Gateway IP = 172.22.69.1

networking DNS edit
Modify DNS settings.

Format
networking DNS edit {options}

Options
Option

Description

Format

-DNSServers 

Comma-separated list of DNS
servers

IP addresses in IPv6 or IPv4
format

-DNSSuffixes 

Comma-separated list of DNS
suffixes

A DNS suffix must be a fully
qualified domain name (FQDN).

Example
Change the DNS server to 172.20.65.20 and the suffix to nas.test:
CLI> networking DNS edit -DNSServers 172.20.65.20 -DNSSuffixes nas.test

networking DNS view
Display DNS settings.

Format
networking DNS view

Example
Display the current DNS settings:
CLI> networking DNS view

Output
DnsServers
DNSSuffixes

CLI Commands

= 10.48.28.33,10.48.28.34
= dell.com

193

networking monitor external-servers-states list
Display a list of external servers and their accessibility status.

Format
networking monitor external-servers-states list

Options
Option

Description

Format

--CSV

Display the command output in a Append --CSV to the command
comma‑delimited format with a
header

Example
Display a current list of external servers and their accessibility status:
CLI> networking monitor external-servers-states list

Output
.--------------------.---------.-------------.
| Host
| Type
| State
|
|--------------------|---------|-------------|
| 172.20.65.20
| DNS
| AVAILABLE
|
|--------------------|---------|-------------|
| 172.22.69.1
| GATEWAY | UNAVAILABLE |
|--------------------|---------|-------------|
| time.lab.town
| NTP
| AVAILABLE
|
'--------------------'---------'-------------'

networking monitor external-servers-states view
Display the accessibility status of a single external server.

Format
networking monitor external-servers-states view  

Arguments
Argument

Description

Format



External server host

Existing server host name or IP
address in IPv6 or IPv4 format. A
host name must contain one or
more sub names, each separated
by a dot. Each sub name can
contain letters, numbers, or

194

CLI Commands

Argument

Description

Format
hyphens, but cannot start or end
in a hyphen.



Type of external server

Possible values are GATEWAY,
STATIC_ROUTE, DNS,
ANTIVIRUS, MAIL_RELAY, NIS,
LDAP, DMA_SERVER,
TRAP_RECIPIENTS, NTP,
ISCSI_PORTAL

Example
Display the accessibility status of an NTP server named time.lab.town:
CLI> networking monitor external-servers-states view time.lab.town NTP

Output
Host = time.lab.town
Type = NTP
State = AVAILABLE

networking monitor performance-per-node last-day
Display the last day’s traffic statistics per NAS controller.

Format
networking monitor performance-per-node last-day

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display the last day’s traffic statistics per NAS controller:
CLI> networking monitor performance-per-node last-day

Output
.----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.
| Co | Tim | NFS | NFS | NDM | NDM | SMB |SMB |Rep |Rep | Net | Net | Tot |
| nt | e
| Rea | Wri | P
| P
|
|
| lic| lic | wor | wor | al |
| ro |
| d
| te | Rea | Wri | Rea | Wri | ati| ati | k
| kOv | Tra |
| ll |
| (pe | (pe | d
| te | d
| te | on | on | Ove | erh | ffi |
| er |
| r
| r
| (pe | (pe | (pe | (pe | Rea| Wri | rhe | ead | c
|
| ID |
| sec | sec | r
| r
| r
| r
| d | te | ad | Wri | (pe |

CLI Commands

195

|
|
| )
| )
| sec | sec | sec | sec | (pe| (pe | Rea | teM | r
|
|
|
|
|
| )
| )
| )
| )
| r | r
| d
| BsP | sec |
|
|
|
|
|
|
|
|
| sec| sec | (pe | erS | )
|
|
|
|
|
|
|
|
|
| ) | )
| r
| ec |
|
|
|
|
|
|
|
|
|
|
|
| sec |
|
|
|
|
|
|
|
|
|
|
|
|
| )
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|----|-----|-----|-----|-----|
| 0 | 05- | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0| 0.0 | 0.0 | 0.0 | 0.0 |
|
| Aug | 0
| 0
| 0
| 0
| 0
| 0
| 0 | 0
| 0
| 0
| 0
|
|
| -14| MB
| MB | MB | MB | MB | MB | MB | MB | MB | MB | MB |
|
| 11: |
|
|
|
|
|
|
|
|
|
|
|
|
| 28: |
|
|
|
|
|
|
|
|
|
|
|
|
| 33 |
|
|
|
|
|
|
|
|
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|----|-----|-----|-----|-----|
| 1 | 05- | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0| 0.0 | 0.0 | 0.0 | 0.0 |
|
| Aug | 0
| 0
| 0
| 0
| 0
| 0
| 0 | 0
| 0
| 0
| 0
|
|
| -14| MB | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB |
|
| 11: |
|
|
|
|
|
|
|
|
|
|
|
|
| 28: |
|
|
|
|
|
|
|
|
|
|
|
|
| 33 |
|
|
|
|
|
|
|
|
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|----|-----|-----|-----|-----|
...[snip]...

networking monitor performance-per-node last-month
Display the last month's traffic statistics per NAS controller.

Format
networking monitor performance-per-node last-month

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the last month's traffic statistics per NAS controller:
CLI> networking monitor performance-per-node last-month

Output
.----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.
| Co | Tim | NFS | NFS | NDM | NDM | SMB | SMB | Rep| Rep | Net | Net | Tot |
| nt | e
| Rea | Wri | P
| P
|
|
| lic| lic | wor | wor | al |
| ro |
| d
| te | Rea | Wri | Rea | Wri | ati| ati | k
| kOv | Tra |
| ll |
| (pe | (pe | d
| te | d
| te | on | on | Ove | erh | ffi |
| er |
| r
| r
| (pe | (pe | (pe | (pe | Rea| Wri | rhe | ead | c
|
| ID |
| sec | sec | r
| r
| r
| r
| d | te | ad | Wri | (pe |
|
|
| )
| )
| sec | sec | sec | sec | (pe| (pe | Rea | teM | r
|
|
|
|
|
| )
| )
| )
| )
| r | r
| d
| BsP | sec |
|
|
|
|
|
|
|
|
| sec| sec | (pe | erS | )
|
|
|
|
|
|
|
|
|
| ) | )
| r
| ec |
|

196

CLI Commands

|
|
|
|
|
|
|
|
|
|
| sec |
|
|
|
|
|
|
|
|
|
|
|
|
| )
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|----|-----|-----|-----|-----|
| 0 | 05- | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0| 0.0 | 0.0 | 0.0 | 0.0 |
|
| Aug | 0
| 0
| 0
| 0
| 0
| 0
| 0 | 0
| 0
| 0
| 0
|
|
| -14 | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB |
|
| 11: |
|
|
|
|
|
|
|
|
|
|
|
|
| 33: |
|
|
|
|
|
|
|
|
|
|
|
|
| 05 |
|
|
|
|
|
|
|
|
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|----|-----|-----|-----|-----|
| 1 | 05- | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0| 0.0 | 0.0 | 0.0 | 0.0 |
|
| Aug | 0
| 0
| 0
| 0
| 0
| 0
| 0 | 0
| 0
| 0
| 0
|
|
| -14 | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB |
|
| 11: |
|
|
|
|
|
|
|
|
|
|
|
|
| 33: |
|
|
|
|
|
|
|
|
|
|
|
|
| 05 |
|
|
|
|
|
|
|
|
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|----|-----|-----|-----|-----|
...[snip]...

networking monitor performance-per-node last-week
Display the last week’s traffic statistics per NAS controller.

Format
networking monitor performance-per-node last-week

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display the last week’s traffic statistics per NAS controller:
CLI> networking monitor performance-per-node last-week

Output
.----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.
| Co | Tim | NFS | NFS | NDM | NDM | SMB | SMB | Rep| Rep | Net | Net | Tot |
| nt | e
| Rea | Wri | P
| P
|
|
| lic| lic | wor | wor | al |
| ro |
| d
| te | Rea | Wri | Rea | Wri | ati| ati | k
| kOv | Tra |
| ll |
| (pe | (pe | d
| te | d
| te | on | on | Ove | erh | ffi |
| er |
| r
| r
| (pe | (pe | (pe | (pe | Rea| Wri | rhe | ead | c
|
| ID |
| sec | sec | r
| r
| r
| r
| d | te | ad | Wri | (pe |
|
|
| )
| )
| sec | sec | sec | sec | (pe| (pe | Rea | teM | r
|
|
|
|
|
| )
| )
| )
| )
| r | r
| d
| BsP | sec |
|
|
|
|
|
|
|
|
| sec| sec | (pe | erS | )
|
|
|
|
|
|
|
|
|
| ) | )
| r
| ec |
|
|
|
|
|
|
|
|
|
|
|
| sec |
|
|
|
|
|
|
|
|
|
|
|
|
| )
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|----|-----|-----|-----|-----|
| 0 | 05- | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0| 0.0 | 0.0 | 0.0 | 0.0 |

CLI Commands

197

|
| Aug | 0
| 0
| 0
| 0
| 0
| 0
| 0 | 0
| 0
| 0
| 0
|
|
| -14 | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB |
|
| 11: |
|
|
|
|
|
|
|
|
|
|
|
|
| 30: |
|
|
|
|
|
|
|
|
|
|
|
|
| 23 |
|
|
|
|
|
|
|
|
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|----|-----|-----|-----|-----|
| 1 | 05- | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0| 0.0 | 0.0 | 0.0 | 0.0 |
|
| Aug | 0
| 0
| 0
| 0
| 0
| 0
| 0 | 0
| 0
| 0
| 0
|
|
| -14 | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB |
|
| 11: |
|
|
|
|
|
|
|
|
|
|
|
|
| 30: |
|
|
|
|
|
|
|
|
|
|
|
|
| 23 |
|
|
|
|
|
|
|
|
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|----|-----|-----|-----|-----|
...[snip]...

networking monitor performance-per-node last-year
Display the last year's traffic statistics per NAS controller.

Format
networking monitor performance-per-node last-year

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the last year's traffic statistics per NAS controller:
CLI> networking monitor performance-per-node last-year

Output
.----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.
| Co | Tim | NFS | NFS | NDM | NDM | SMB | SMB | Rep| Rep | Net | Net | Tot |
| nt | e
| Rea | Wri | P
| P
|
|
| lic| lic | wor | wor | al |
| ro |
| d
| te | Rea | Wri | Rea | Wri | ati| ati | k
| kOv | Tra |
| ll |
| (pe | (pe | d
| te | d
| te | on | on | Ove | erh | ffi |
| er |
| r
| r
| (pe | (pe | (pe | (pe | Rea| Wri | rhe | ead | c
|
| ID |
| sec | sec | r
| r
| r
| r
| d | te | ad | Wri | (pe |
|
|
| )
| )
| sec | sec | sec | sec | (pe| (pe | Rea | teM | r
|
|
|
|
|
| )
| )
| )
| )
| r | r
| d
| BsP | sec |
|
|
|
|
|
|
|
|
| sec| sec | (pe | erS | )
|
|
|
|
|
|
|
|
|
| ) | )
| r
| ec |
|
|
|
|
|
|
|
|
|
|
|
| sec |
|
|
|
|
|
|
|
|
|
|
|
|
| )
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
| 0 | 10- | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0| 0.0 | 0.0 | 0.0 | 0.0 |
|
| Dec | 0
| 0
| 0
| 0
| 0
| 0
| 0 | 0
| 0
| 0
| 0
|
|
| -14 | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB |
|
| 11: |
|
|
|
|
|
|
|
|
|
|
|
|
| 33: |
|
|
|
|
|
|
|
|
|
|
|

198

CLI Commands

|
| 50 |
|
|
|
|
|
|
|
|
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
| 1 | 10- | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0| 0.0 | 0.0 | 0.0 | 0.0 |
|
| Dec | 0
| 0
| 0
| 0
| 0
| 0
| 0 | 0
| 0
| 0
| 0
|
|
| -14 | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB |
|
| 11: |
|
|
|
|
|
|
|
|
|
|
|
|
| 33: |
|
|
|
|
|
|
|
|
|
|
|
|
| 50 |
|
|
|
|
|
|
|
|
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
...[snip]...

networking monitor performance-per-node now
Display the current traffic statistics per NAS controller.

Format
networking monitor performance-per-node now

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display the current traffic statistics per NAS controller:
CLI> networking monitor performance-per-node now

Output
.----.-----.-----.-----.-----.-----.-----.-----.----.-----.-----.-----.-----.
| Co | Tim | NFS | NFS | NDM | NDM | SMB | SMB | Rep| Rep | Net | Net | Tot |
| nt | e
| Rea | Wri | P
| P
|
|
| lic| lic | wor | wor | al |
| ro |
| d
| te | Rea | Wri | Rea | Wri | ati| ati | k
| kOv | Tra |
| ll |
| (pe | (pe | d
| te | d
| te | on | on | Ove | erh | ffi |
| er |
| r
| r
| (pe | (pe | (pe | (pe | Rea| Wri | rhe | ead | c
|
| ID |
| sec | sec | r
| r
| r
| r
| d | te | ad | Wri | (pe |
|
|
| )
| )
| sec | sec | sec | sec | (pe| (pe | Rea | teM | r
|
|
|
|
|
| )
| )
| )
| )
| r | r
| d
| BsP | sec |
|
|
|
|
|
|
|
|
| sec| sec | (pe | erS | )
|
|
|
|
|
|
|
|
|
| ) | )
| r
| ec |
|
|
|
|
|
|
|
|
|
|
|
| sec |
|
|
|
|
|
|
|
|
|
|
|
|
| )
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|----|-----|-----|-----|-----|
| 0 | 05- | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0| 0.0 | 0.0 | 0.0 | 0.0 |
|
| Aug | 0
| 0
| 0
| 0
| 0
| 0
| 0 | 0
| 0
| 0
| 0
|
|
| -14 | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB |
|
| 11: |
|
|
|
|
|
|
|
|
|
|
|
|
| 28: |
|
|
|
|
|
|
|
|
|
|
|
|
| 33 |
|
|
|
|
|
|
|
|
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|----|-----|-----|-----|-----|
| 1 | 05- | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0| 0.0 | 0.0 | 0.0 | 0.0 |
|
| Aug | 0
| 0
| 0
| 0
| 0
| 0
| 0 | 0
| 0
| 0
| 0
|

CLI Commands

199

|
| -14 | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB |
|
| 11: |
|
|
|
|
|
|
|
|
|
|
|
|
| 28: |
|
|
|
|
|
|
|
|
|
|
|
|
| 33 |
|
|
|
|
|
|
|
|
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|----|-----|-----|-----|-----|
...[snip]...

networking monitor performance-summary IOPS lastday
Display the last day's IOPS traffic statistics.

Format
networking monitor performance-summary IOPS last-day

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the last day's IOPS traffic statistics:
CLI> networking monitor performance-summary IOPS last-day

Output
.--------------.--------.--------.--------.--------.--------.--------------.
| Time
| NFS
| NFS
| NFS
| SMB
|SMB
| SMB IOPS
|
|
| IOPS
| IOPS
| IOPS
| IOPS
|IOPS
| Other
|
|
| Read
| Write | Other | Read
|Write |
|
|--------------|--------|--------|--------|--------|-------|--------------|
| 10-May-14
| 0
| 0
| 0
| 0
|0
| 0
|
| 14:42:19
|
|
|
|
|
|
|
|--------------|--------|--------|--------|--------|-------|--------------|
| 10-May-14
| 0
| 0
| 9
| 0
|0
| 0
|
| 13:00:00
|
|
|
|
|
|
|
|--------------|--------|--------|--------|--------|-------|--------------|
...[snip]...

networking monitor performance-summary IOPS lastmonth
Display the last month’s IOPS traffic statistics.

Format
networking monitor performance-summary IOPS last-month

200

CLI Commands

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the last month’s IOPS traffic statistics:
CLI> networking monitor performance-summary IOPS last-month

Output
.--------------.--------.--------.--------.--------.--------.-------------.
| Time
| NFS
| NFS
| NFS
| SMB
|SMB
| SMB IOPS
|
|
| IOPS
| IOPS
| IOPS
| IOPS
|IOPS
| Other
|
|
| Read
| Write | Other | Read
|Write |
|
|--------------|--------|--------|--------|--------|-------|--------------|
| 10-May-14
| 0
| 0
| 0
| 0
|0
| 0
|
| 14:42:44
|
|
|
|
|
|
|
|--------------|--------|--------|--------|--------|-------|--------------|
| 10-May-14
| 0
| 0
| 8
| 0
|0
| 0
|
| 06:00:00
|
|
|
|
|
|
|
|--------------|--------|--------|--------|--------|-------|--------------|
...[snip]...

networking monitor performance-summary IOPS lastweek
Display the last week’s IOPS traffic statistics.

Format
networking monitor performance-summary IOPS last-week

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the last week’s IOPS traffic statistics:
CLI> networking monitor performance-summary IOPS last-week

CLI Commands

201

Output
.--------------.--------.--------.--------.--------.--------.--------------.
| Time
| NFS
| NFS
| NFS
| SMB
|SMB
| SMB IOPS
|
|
| IOPS
| IOPS
| IOPS
| IOPS
|IOPS
| Other
|
|
| Read
| Write | Other | Read
|Write |
|
|--------------|--------|--------|--------|--------|-------|--------------|
| 10-May-14
| 0
| 0
| 0
| 0
|0
| 0
|
| 14:43:33
|
|
|
|
|
|
|
|--------------|--------|--------|--------|--------|-------|--------------|
| 10-May-14
| 0
| 0
| 8
| 0
|0
| 0
|
| 06:00:00
|
|
|
|
|
|
|
|--------------|--------|--------|--------|--------|-------|--------------|
...[snip]...

networking monitor performance-summary IOPS lastyear
Display the last year's IOPS traffic statistics.

Format
networking monitor performance-summary IOPS last-year

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the last year's IOPS traffic statistics:
CLI> networking monitor performance-summary IOPS last-year

Output
.--------------.--------.--------.--------.--------.--------.--------------.
| Time
| NFS
| NFS
| NFS
| SMB
|SMB
| SMB IOPS
|
|
| IOPS
| IOPS
| IOPS
| IOPS
|IOPS
| Other
|
|
| Read
| Write | Other | Read
|Write |
|
|--------------|--------|--------|--------|--------|-------|--------------|
| 10-May-14
| 0
| 0
| 0
| 0
|0
| 0
|
| 14:43:02
|
|
|
|
|
|
|
|--------------|--------|--------|--------|--------|-------|--------------|
| 26-Apr-14
| 0
| 0
| 8
| 0
|0
| 0
|
| 00:00:00
|
|
|
|
|
|
|
|--------------|--------|--------|--------|--------|-------|--------------|
...[snip]...

202

CLI Commands

networking monitor performance-summary IOPS now
Display the current IOPS traffic statistics.

Format
networking monitor performance-summary IOPS now

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the current IOPS traffic statistics:
CLI> networking monitor performance-summary IOPS now

Output
.--------------.--------.--------.--------.--------.--------.--------------.
| Time
| NFS
| NFS
| NFS
| SMB
|SMB
| SMB IOPS
|
|
| IOPS
| IOPS
| IOPS
| IOPS
|IOPS
| Other
|
|
| Read
| Write | Other | Read
|Write |
|
|--------------|--------|--------|--------|--------|-------|--------------|
| 10-May-13
| 0
| 0
| 0
| 0
|0
| 0
|
| 14:42:19
|
|
|
|
|
|
|
|--------------|--------|--------|--------|--------|-------|--------------|
| 10-May-13
| 0
| 0
| 9
| 0
|0
| 0
|
| 13:00:00
|
|
|
|
|
|
|
|--------------|--------|--------|--------|--------|-------|--------------|
...[snip]...

networking monitor performance-summary read last-day
Display the last day's read traffic statistics.

Format
networking monitor performance-summary read last-day

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

CLI Commands

203

Example
Display the last day's read traffic statistics:
CLI> networking monitor performance-summary read last-day

Output
.--------.--------.--------.--------------.-------------.--------------.
| Time
| NFS
| NDMP
| SMB Read
| Replication | Network
|
|
| Read
| Read
| (per sec)
| Read (per
| Overhead
|
|
| (per
| (per
|
| sec)
| Read (per
|
|
| sec)
| sec)
|
|
| sec)
|
|--------|--------|--------|--------------|-------------|--------------|
| 10-May | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 14:19: |
|
|
|
|
|
| 20
|
|
|
|
|
|
|--------|--------|--------|--------------|-------------|--------------|
| 10-May | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 13:00: |
|
|
|
|
|
| 00
|
|
|
|
|
|
|--------|--------|--------|--------------|-------------|--------------|
...[snip]...

networking monitor performance-summary read lastmonth
Display the last month’s read traffic statistics.

Format
networking monitor performance-summary read last-month

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header'

Append --CSV to the command

Example
Display the last month’s read traffic statistics:
CLI> networking monitor performance-summary read last-month

Output
.--------.--------.--------.--------------.-------------.--------------.
| Time
| NFS
| NDMP
| SMB Read
| Replication | Network
|
|
| Read
| Read
| (per sec)
| Read (per
| Overhead
|
|
| (per
| (per
|
| sec)
| Read (per
|

204

CLI Commands

|
| sec)
| sec)
|
|
| sec)
|
|--------|--------|--------|--------------|-------------|--------------|
| 10-May | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 14:20: |
|
|
|
|
|
| 47
|
|
|
|
|
|
|--------|--------|--------|--------------|-------------|--------------|
| 09-May | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 00:00: |
|
|
|
|
|
| 00
|
|
|
|
|
|
|--------|--------|--------|--------------|-------------|--------------|
...[snip]...

networking monitor performance-per-node last-week
Display the last week’s traffic statistics per NAS controller.

Format
networking monitor performance-per-node last-week

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display the last week’s traffic statistics per NAS controller:
CLI> networking monitor performance-per-node last-week

Output
.----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.
| Co | Tim | NFS | NFS | NDM | NDM | SMB | SMB | Rep| Rep | Net | Net | Tot |
| nt | e
| Rea | Wri | P
| P
|
|
| lic| lic | wor | wor | al |
| ro |
| d
| te | Rea | Wri | Rea | Wri | ati| ati | k
| kOv | Tra |
| ll |
| (pe | (pe | d
| te | d
| te | on | on | Ove | erh | ffi |
| er |
| r
| r
| (pe | (pe | (pe | (pe | Rea| Wri | rhe | ead | c
|
| ID |
| sec | sec | r
| r
| r
| r
| d | te | ad | Wri | (pe |
|
|
| )
| )
| sec | sec | sec | sec | (pe| (pe | Rea | teM | r
|
|
|
|
|
| )
| )
| )
| )
| r | r
| d
| BsP | sec |
|
|
|
|
|
|
|
|
| sec| sec | (pe | erS | )
|
|
|
|
|
|
|
|
|
| ) | )
| r
| ec |
|
|
|
|
|
|
|
|
|
|
|
| sec |
|
|
|
|
|
|
|
|
|
|
|
|
| )
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
| 0 | 05- | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0| 0.0 | 0.0 | 0.0 | 0.0 |
|
| Aug | 0
| 0
| 0
| 0
| 0
| 0
| 0 | 0
| 0
| 0
| 0
|
|
| -13 | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB |
|
| 11: |
|
|
|
|
|
|
|
|
|
|
|
|
| 30: |
|
|
|
|
|
|
|
|
|
|
|
|
| 23 |
|
|
|
|
|
|
|
|
|
|
|

CLI Commands

205

|----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
| 1 | 05- | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0| 0.0 | 0.0 | 0.0 | 0.0 |
|
| Aug | 0
| 0
| 0
| 0
| 0
| 0
| 0 | 0
| 0
| 0
| 0
|
|
| -13 | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB |
|
| 11: |
|
|
|
|
|
|
|
|
|
|
|
|
| 30: |
|
|
|
|
|
|
|
|
|
|
|
|
| 23 |
|
|
|
|
|
|
|
|
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
...[snip]...

networking monitor performance-summary read lastyear
Display the last year's read traffic statistics.

Format
networking monitor performance-summary read last-year

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the last year's read traffic statistics:
CLI> networking monitor performance-summary read last-year

Output
.--------.--------.--------.--------------.-------------.--------------.
| Time
| NFS
| NDMP
| SMB Read
| Replication | Network
|
|
| Read
| Read
| (per sec)
| Read (per
| Overhead
|
|
| (per
| (per
|
| sec)
| Read (per
|
|
| sec)
| sec)
|
|
| sec)
|
|--------|--------|--------|--------------|-------------|--------------|
| 10-May | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 14:21: |
|
|
|
|
|
| 14
|
|
|
|
|
|
|--------|--------|--------|--------------|-------------|--------------|
| 26-Apr | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 00:00: |
|
|
|
|
|
| 00
|
|
|
|
|
|
|--------|--------|--------|--------------|-------------|--------------|
...[snip]...

206

CLI Commands

networking monitor performance-per-node last-day
Display the last day’s traffic statistics per NAS controller.

Format
networking monitor performance-per-node last-day

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display the last day’s traffic statistics per NAS controller:
CLI> networking monitor performance-per-node last-day

Output
.----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.-----.
| Co | Tim | NFS | NFS | NDM | NDM | CIF | CIF | Rep| Rep | Net | Net | Tot |
| nt | e
| Rea | Wri | P
| P
| S
| S
| lic| lic | wor | wor | al |
| ro |
| d
| te | Rea | Wri | Rea | Wri | ati| ati | k
| kOv | Tra |
| ll |
| (pe | (pe | d
| te | d
| te | on | on | Ove | erh | ffi |
| er |
| r
| r
| (pe | (pe | (pe | (pe | Rea| Wri | rhe | ead | c
|
| ID |
| sec | sec | r
| r
| r
| r
| d | te | ad | Wri | (pe |
|
|
| )
| )
| sec | sec | sec | sec | (pe| (pe | Rea | teM | r
|
|
|
|
|
| )
| )
| )
| )
| r | r
| d
| BsP | sec |
|
|
|
|
|
|
|
|
| sec| sec | (pe | erS | )
|
|
|
|
|
|
|
|
|
| ) | )
| r
| ec |
|
|
|
|
|
|
|
|
|
|
|
| sec |
|
|
|
|
|
|
|
|
|
|
|
|
| )
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|----|-----|-----|-----|-----|
| 0 | 05- | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0| 0.0 | 0.0 | 0.0 | 0.0 |
|
| Aug | 0
| 0
| 0
| 0
| 0
| 0
| 0 | 0
| 0
| 0
| 0
|
|
| -13 | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB |
|
| 11: |
|
|
|
|
|
|
|
|
|
|
|
|
| 28: |
|
|
|
|
|
|
|
|
|
|
|
|
| 33 |
|
|
|
|
|
|
|
|
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|----|-----|-----|-----|-----|
| 1 | 05- | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0| 0.0 | 0.0 | 0.0 | 0.0 |
|
| Aug | 0
| 0
| 0
| 0
| 0
| 0
| 0 | 0
| 0
| 0
| 0
|
|
| -13 | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB | MB |
|
| 11: |
|
|
|
|
|
|
|
|
|
|
|
|
| 28: |
|
|
|
|
|
|
|
|
|
|
|
|
| 33 |
|
|
|
|
|
|
|
|
|
|
|
|----|-----|-----|-----|-----|-----|-----|-----|----|-----|-----|-----|-----|
...[snip]...

CLI Commands

207

networking monitor performance-summary write lastday
Display the last day’s write traffic statistics.

Format
networking monitor performance-summary write last-day

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the last day’s write traffic statistics:
CLI> networking monitor performance-summary write last-day

Output
.--------.--------.--------.--------------.--------------.--------------.
| Time
| NFS
| NDMP
| SMB Write
| Replication | Network
|
|
| Write | Write | (per sec)
| Write (per
| Overhead
|
|
| (per
| (per
|
| sec)
| Write (per
|
|
| sec)
| sec)
|
|
| sec)
|
|--------|--------|--------|--------------|--------------|--------------|
| 10-May | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 14:21: |
|
|
|
|
|
| 55
|
|
|
|
|
|
|--------|--------|--------|--------------|--------------|--------------|
| 10-May | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 13:00: |
|
|
|
|
|
| 00
|
|
|
|
|
|
|--------|--------|--------|--------------|--------------|--------------|
...[snip]...

networking monitor performance-summary write lastmonth
Display the last month’s write traffic statistics.

Format
networking monitor performance-summary write last-month

208

CLI Commands

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the last month’s write traffic statistics:
CLI> networking monitor performance-summary write last-month

Output
.--------.--------.--------.--------------.--------------.--------------.
| Time
| NFS
| NDMP
| SMB Write
| Replication | Network
|
|
| Write | Write | (per sec)
| Write (per | Overhead
|
|
| (per
| (per
|
| sec)
| Write (per
|
|
| sec)
| sec)
|
|
| sec)
|
|--------|--------|--------|--------------|-------------|--------------|
| 10-May | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 14:23: |
|
|
|
|
|
| 07
|
|
|
|
|
|
|--------|--------|--------|--------------|-------------|--------------|
| 26-Apr | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 00:00: |
|
|
|
|
|
| 00
|
|
|
|
|
|
|--------|--------|--------|--------------|-------------|--------------|
...[snip]...

networking monitor performance-summary write lastweek
Display the last week’s write traffic statistics.

Format
networking monitor performance-summary write last-week

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

CLI Commands

209

Example
Display the last week’s write traffic statistics:
CLI> networking monitor performance-summary write last-week

Output
.--------.--------.--------.--------------.-------------.--------------.
| Time
| NFS
| NDMP
| SMB Write
| Replication | Network
|
|
| Write | Write | (per sec)
| Write (per | Overhead
|
|
| (per
| (per
|
| sec)
| Write (per
|
|
| sec)
| sec)
|
|
| sec)
|
|--------|--------|--------|--------------|-------------|--------------|
| 10-May | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 14:23: |
|
|
|
|
|
| 07
|
|
|
|
|
|
|--------|--------|--------|--------------|-------------|--------------|
| 26-Apr | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 00:00: |
|
|
|
|
|
| 00
|
|
|
|
|
|
|--------|--------|--------|--------------|-------------|--------------|
...[snip]...

networking monitor performance-summary write lastyear
Display the last year's write traffic statistics.

Format
networking monitor performance-summary write last-year

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the last year's write traffic statistics:
CLI> networking monitor performance-summary write last-year

Output
.--------.--------.--------.--------------.-------------.--------------.
| Time
| NFS
| NDMP
| SMB Write
| Replication | Network
|
|
| Write | Write | (per sec)
| Write (per | Overhead
|
|
| (per
| (per
|
| sec)
| Write (per
|

210

CLI Commands

|
| sec)
| sec)
|
|
| sec)
|
|--------|--------|--------|--------------|-------------|--------------|
| 10-May | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 14:23: |
|
|
|
|
|
| 07
|
|
|
|
|
|
|--------|--------|--------|--------------|-------------|--------------|
| 26-Apr | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 00:00: |
|
|
|
|
|
| 00
|
|
|
|
|
|
|--------|--------|--------|--------------|-------------|--------------|
...[snip]...

networking monitor performance-summary write now
Display the current write traffic statistics.

Format
networking monitor performance-summary write now

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display the current write traffic statistics:
CLI> networking monitor performance-summary write write

Output
.--------.--------.--------.--------------.-------------.--------------.
| Time
| NFS
| NDMP
| SMB Write
| Replication | Network
|
|
| Write | Write | (per sec)
| Write (per | Overhead
|
|
| (per
| (per
|
| sec)
| Write (per
|
|
| sec)
| sec)
|
|
| sec)
|
|--------|--------|--------|--------------|-------------|--------------|
| 10-May | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 14:21: |
|
|
|
|
|
| 55
|
|
|
|
|
|
|--------|--------|--------|--------------|-------------|--------------|
| 10-May | 0.00
| 0.00
| 0.00 MB
| 0.00 MB
| 0.00 MB
|
| -13
| MB
| MB
|
|
|
|
| 13:00: |
|
|
|
|
|
| 00
|
|
|
|
|
|
|--------|--------|--------|--------------|-------------|--------------|
...[snip]...

CLI Commands

211

networking open-files close
Close open files by file handle, protocol, or controllerID.

Format
networking open-files close

Options
Option

Description

FileHandle 

File handle

Protocol 

Protocol through which the file
was opened

ControllerID 

ID of the controller through
which the file was opened

Format

Possible values are
((enums.ClientProtocol))

Example
Close an open file:
CLI> networking open-files close 35625 SMB 0

Output
.--------.--------.--------------.--------.--------.--------.--------.-------.
| Protoc
| Contro | User
| Comput | Number |Connec | Idle
| Guest |
| ol
| ller
|
| er
| Open
|ted
| Time
|
|
|
| Id
|
|
| Files |Time
|
|
|
|----------|--------|--------------|--------|-------|--------|--------|-------|
|SMB
| 0
| idffs1\user1 | ::ffff | 1
|00:14: | 00:00: | No
|
|
|
|
| :172.2 |
|16
| 00
|
|
|
|
|
| 2.69.1 |
|
|
|
|
|
|
|
| 8
|
|
|
|
|
'----------'--------'--------------'--------'--------'-------'--------'-------'

networking open-files close-file-by-path
Close all files with the specified path.

Format
networking open-files close-file-by-path /vol1/dir1/file1

Options
Option

Description

FilePath 

File path

212

Format

CLI Commands

Example
Close an open file by path:
CLI> networking open-files close 

Output
.----------.--------.--------------.--------.--------.-------.--------.-------.
| Protoc
| Contro | User
| Comput | Number |Connec | Idle
| Guest |
| ol
| ller
|
| er
| Open
|ted
| Time
|
|
|
| Id
|
|
| Files |Time
|
|
|
|----------|--------|--------------|--------|-------|--------|--------|-------|
|SMB
| 0
| idffs1\user1 | ::ffff | 1
|00:14: | 00:00: | No
|
|
|
|
| :172.2 |
|16
| 00
|
|
|
|
|
| 2.69.1 |
|
|
|
|
|
|
|
| 8
|
|
|
|
|
'----------'--------'--------------'--------'--------'-------'--------'-------'

networking open-files close close-file-by-user
Close open files by user.

Format
networking open-files close close-file-by-user 

Options
Option

Description

AccessedBy 

User who opened the file

Format

Example
Close an open file by user:
CLI> networking open-files close close-file-by-user idffs1\Jonathans2

Output
Confirmation: You are about to close opened file(s). Are you sure? All unsaved
changes done by client(s) will be lost. Filter details:
clientUserName='idffs1\Jonathans2'
Are you sure that you want to complete the operation? ( Yes / No ):Yes

networking open-files list
Display a list of SMB and NFS open files.

Format
networking open-files list

CLI Commands

213

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

—FilterByName 

Displays only the files matching
the specified name

Example
Display a list of open files:
CLI> networking open-files list

Output
.-------.---------------.--------------.---------.-----.----------.-----------.
| File | User
| Controller ID| Protocol|Locks| Open Mode|File handle|
|-------|---------------|--------------|---------|-----|----------|-----------|
| \jvol1| DELL\jonathans| 0
| SMB
| 0
| Read Only| 35625
|
|-------|---------------|--------------|---------|-----|----------|-----------|
| \jvol2| cplsup3\Admin | 1
| SMB
| 0
| Special | 108
|
|-------|---------------|--------------|---------|-----|----------|-----------|
| \jvol2| cplsup3\Admin | 1
| SMB
| 0
| Read Only| 117
|
'-------'---------------'--------------'---------'-----'----------'-----------'

networking open-files view
Display information about SMB and NFS open files.

Format
networking open-files view   

Options
Option

Description

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

FileHandle 

File handle

Protocol 

Protocol through which the file
was opened. Possible values are
((enums.ClientProtocol))

ControllerID 

ID of the controller through
which the file was opened

214

Format

CLI Commands

Example
Display information about open files:
CLI> networking open-files list 35625 SMB0

Output
Path
Accessed By
Protocol
Number Of Locks
Mode
File handle

=
=
=
=
=
=

jvol1
Dell\Jonathans
SMB
0
Read ONly
35625

networking static-routes add
Add a static route for a destination subnet.

Format
networking static-routes add  


Arguments
Argument

Description

Format



Network ID of the destination
subnet

IP address in IPv4 or IPv6 format



Prefix of the destination subnet

Integer (up to 126)



Gateway for the destination
subnet

IP address in IPv4 or IPv6 format

Example
Add a static route to a subnet with the address 172.51.0.0 16 172.41.0.50:
CLI> networking/static-routes> add 172.51.0.0 16 172.41.0.50

networking static-routes delete
Delete the static route for a destination subnet.

Format
networking static-routes delete  

CLI Commands

215

Arguments
Argument

Description

Format



Network ID of the destination
subnet

Existing network ID



Prefix of the destination subnet

Existing network prefix

Example
Delete the static route to a subnet with the address 10.1.100.0 and prefix 24:
CLI> networking static-routes delete 10.1.100.0 24

networking static-routes edit
Modify the gateway for a destination subnet.

Format
networking static-routes edit  


Arguments
Argument

Description

Format



Network ID of the destination
subnet

Existing network ID



Prefix of the destination subnet

Existing network prefix



Gateway for the destination
subnet

IP address in IPv6 format

Example
Modify a static route to a subnet with the ID 172.51.0.0 and prefix 16 to use the gateway172.41.0.55:
CLI> networking/static-routes> edit 172.51.0.0 16 172.41.0.55

networking static-routes list
Display a list of the static routes.

Format
networking static-routes list

216

CLI Commands

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display the current static routes:
CLI> networking static-routes list

Output
.------------------------.---------------------------.------------.
| Destination Network ID | Destination Prefix Length | Gateway IP |
|------------------------|---------------------------|------------|
| 172.51.00
| 16
|172.41.2.65 |
.------------------------.---------------------------.------------.

networking static-routes view
Display static route settings for a destination subnet.

Format
networking static-routes view  

Arguments
Argument

Description

Format



Network ID of the destination
subnet

Existing network ID



Prefix of the destination subnet

Existing network prefix (integer)

Example
Display static route settings for a subnet with ID 172.51.0.0 and prefix 16:
CLI> networking static-routes view 172.51.0.0 16

Output
Destination Network ID = 172.51.0.0
Destination Prefix
= 16
Gateway IP
= 172.41.2.65
CLI/networking/static-routes>

CLI Commands

217

networking subnets add
Add a subnet on the client network.

Format
networking subnets add  [options]

Arguments
Argument

Description

Format

< Prefix length>

Prefix length of the subnet

Routing prefix size in CIDR
notation, equivalent to the
number of leading 1 bits in the
routing subnet mask

Option

Description

Format

-VLANTag 

VLAN ID of the subnet

Whole positive number (1 to
4094)

-PrivateIPs 

NAS controller IP addresses

Comma-separated list of private
IP addresses in IPv6 or IPv4
format according to the number
of controllers

-PublicIPs 

Client VIPs

Comma-separated list of VIPs;
must specify at least one

Options

Example
Add a client subnet with prefix length 16 and the client VIPs 192.168.0.14 and 192.168.0.15 with NAS
controller IP addresses 192.168.0.16 and 192.168.0.17:
CLI> networking subnets add 16 255.255.128.0 -PublicIPs
192.168.0.14,192.168.0.15 -PrivateIPs 192.168.0.16,192.168.0.17

networking subnets delete
Delete a subnet from the client network.

Format
networking subnets delete  

218

CLI Commands

Arguments
Argument

Description

Format



Network ID of the subnet

Existing network ID

< PrefixLength>

Prefix length of the subnet

Existing prefix length (integer)

Example
Delete a client subnet with the ID 192.168.0.0 and prefix 16:
CLI> networking subnets delete 192.168.0.0 16

networking subnets edit
Modify client network subnet settings.

Format
networking subnets edit   {options}

Arguments
Argument

Description

Format



Current network ID of the subnet Existing network ID

< PrefixLength>

Current prefix length of the
subnet

Routing prefix size in CIDR
notation, equivalent to the
number of leading 1 bits in the
routing subnet mask

Option

Description

Format

-NewPrefixLength


New prefix length of the subnet

Integer

-VLANTag 

VLAN ID of the subnet

Whole positive number (1 to
4094)

-PrivateIPs 

NAS controller IP addresses

Comma-separated list of private
IP addresses in IPv6 or IPv4
format

-PublicIPs 

Client VIPs

Comma-separated list of VIPs

Options

Example
Edit a client subnet with the ID 192.168.0.0 to change the prefix from 18 to 19:
CLI> networking subnets edit 192.168.0.0 18 -NewPrefix 19

CLI Commands

219

networking subnets list
Display a list of the client network subnets.

Format
networking subnets list

Options
Option

Description

Format

--CSV

Displays the command output in Append --CSV to the command
a comma‑delimited format with a
header

Example
Display a list of the current client network subnets:
CLI> networking subnets list

Output
.-------------.----------------.----------.----------------.-----------------.
| Network Id | Prefix length | VLAN Tag | PrivateIPs
| PublicIPs
|
|-------------|----------------|----------|----------------|-----------------|
| 172.22.69.0 | 24
| 0
| 172.22.69.42, | 172.22.69.40,
|
|
|
|
| 172.22.69.43
| 172.22.69.41
|
'-------------'----------------'----------'----------------'-----------------'

networking subnets view
Display client network subnet settings.

Format
networking subnets view  

Arguments
Argument

Description

Format



Network ID of the subnet

Existing network ID



Prefix length of the subnet

Routing prefix size in CIDR
notation, equivalent to the
number of leading 1 bits in the
routing subnet mask

220

CLI Commands

Example
Display the settings for a client network with the ID 172.22.69.0 and the prefix length 24:
CLI> networking subnets view 172.22.69.0 24

Output
Network Id = 172.22.69.0
Prefix
= 24
VLAN Tag
= 0
PrivateIPs = 172.22.69.42,172.22.69.43
PublicIPs = 172.22.69.40,172.22.69.41

system administrators add
Add administrator privileges to a user.

Format
system administrators add  {options}

Arguments
Argument

Description

Format



Name of the user that will
become administrator

Length must be less than 97
characters

Option

Description

Format

-Email 

Email address of the
administrator

Email address in the following
format: 'xxx@xxx.xxx'

-Scope 

Administrator scope

Possible values are
NASClusterAdministrator,
NASVolumeAdministrator

-EnableNASVolumesSeverity


Indicate whether events from the Possible values are Yes, No
NAS volumes workspace should
be sent by email to the
administrator

-NASVolumesSeverity


Severity of the events from the
Possible values are All, Major
NAS volumes workspace that will
be sent by email to the
administrator

-EnableAccessControlSeverity


Indicate whether events from the Possible values are Yes, No
access control workspace should
be sent by email to the
administrator

Options

CLI Commands

221

Option

Description

Format

-AccessControlSeverity


Severity of the events from the
access control workspace that
will be sent by email to the
administrator

Possible values are All, Major

-EnableNetworkingSeverity


Indicate whether events from the Possible values are Yes, No
performance and connectivity
workspace should be sent by
email to the administrator

-NetworkingSeverity


Severity of the events from the
performance and connectivity
workspace that will be sent by
email to the administrator

-EnableHardwareSeverity


Indicate whether events from the Possible values are Yes, No
hardware workspace should be
sent by email to the administrator

-HardwareSeverity


Severity of the events from the
Possible values are All, Major
hardware workspace that will be
sent by email to the administrator

-EnableSystemSeverity


Indicate whether events from the Possible values are Yes, No
system workspace should be sent
by email to the administrator

-SystemSeverity


Severity of the events from the
Possible values are All, Major
system workspace that will be
sent by email to the administrator

Possible values are All, Major

Example
Add a cluster administrator named Administrator2 with the email address admin@domain.com and
enable email for all hardware events:
CLI> system administrators add Administrator2 -Email admin@domain.com -Scope
NASClusterAdministrator -EnableHardwareSeverity Yes -HardwareSeverity All

system administrators delete
Delete the administrator privileges from the user.

Format
system administrators delete 

Arguments
Argument

Description

Format



Name of the administrator

Existing administrator user name

222

CLI Commands

Example
Delete the administrator privileges from an administrator named Administrator2:
CLI> system administrators delete Administrator2

system administrators edit
Modify administrator settings.

Format
system administrators edit  {options}

Arguments
Argument

Description

Format



Name of the administrator

Existing administrator user name

Option

Description

Format

-Email 

Email address of the
administrator

Email address in the following
format: 'xxx@xxx.xxx'

-Scope 

Administrator scope

Possible values are
NASClusterAdministrator,
NASVolumeAdministrator

-EnableNASVolumesSeverity


Indicate whether events from the Possible values are Yes, No
NAS volumes workspace should
be sent by email to the
administrator

-NASVolumesSeverity


Severity of the events from the
Possible values are All, Major
NAS volumes workspace that will
be sent by email to the
administrator

-EnableAccessControlSeverity


Indicate whether events from the Possible values are Yes, No
access control workspace should
be sent by email to the
administrator

-AccessControlSeverity


Severity of the events from the
access control workspace that
will be sent by email to the
administrator

-EnableNetworkingSeverity


Indicate whether events from the Possible values are Yes, No
performance and connectivity

Options

CLI Commands

Possible values are All, Major

223

Option

Description

Format

workspace should be sent by
email to the administrator
-NetworkingSeverity


Severity of the events from the
performance and connectivity
workspace that will be sent by
email to the administrator

Possible values are All, Major

-EnableHardwareSeverity


Indicate whether events from the Possible values are Yes, No
hardware workspace should be
sent by email to the administrator

-HardwareSeverity


Severity of the events from the
Possible values are All, Major
hardware workspace that will be
sent by email to the administrator

-EnableSystemSeverity


Indicate whether events from the Possible values are Yes, No
system workspace should be sent
by email to the administrator

-SystemSeverity


Severity of the events from the
Possible values are All, Major
system workspace that will be
sent by email to the administrator

Example
Change the email address of an administrator named Administrator2 to storage@domain.com and enable
email for all hardware events:
CLI> system administrators edit Administrator2 -Email storage@domain.com EnableHardwareSeverity Yes -HardwareSeverity All

system administrators list
Display a list of the administrators.

Format
system administrators list

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a list of the current administrators:
CLI> system administrators list

224

CLI Commands

Output
.----------------.---------------------.--------.---------------------------.
| User Name
| Email
| SSHKey | Scope
|
|----------------|---------------------|--------|---------------------------|
| Administrator | user@jonathan-linux2|ssh-rsa | NAS cluster administrator |
|----------------|---------------------|--------|---------------------------|
| Administrator2 | storage@domain.com |
| NAS cluster administrator |
'----------------'---------------------'--------'---------------------------'

system administrators view
Display administrator settings.

Format
system administrators view 

Arguments
Argument

Description

Format



Name of the administrator

Existing administrator user name

Example
Display the current settings for an administrator named Administrator2:
CLI> system administrators view Administrator2

Output
User Name
Email
MachineName
SSHKey
Scope
Enable NAS Volumes Severity
NAS Volumes Severity
Enable Access Control Severity
Access Control Severity
Enable Networking Severity
Networking Severity
Enable Hardware Severity
Hardware Severity
Enable System Severity
System Severity

=
=
=
=
=
=
=
=
=
=
=
=
=
=
=

Administrator2
storage@domain.com
172.41.200.145
ssh-rsa
NAS cluster administrator
Yes
Major
Yes
Major
Yes
Major
Yes
All
Yes
Major

system administrators passwordless-access add-ssh-keys
Add a secure shell handling (SSH) key.
This command allows the Administrator to use a private self-generated SSH key for authenticating against
FluidFS CLI.

CLI Commands

225

Format
system administrators passwordless-access add-ssh-keys  


Arguments
Argument

Description

Format



Name of the user that will
become administrator

Length must be less than 97
characters



Name of machine



Public SSH key for a specified
machine that will allow the
administrator to enter the CLI
without a user name and
password

Existing SSH key

system administrators passwordless-access del-ssh-key
Delete a secure shell handling (SSH) key.

Format
system administrators passwordless-access del-ssh-key  


Arguments
Argument

Description

Format



Name of the user that will
become administrator

Length must be less than 97
characters



Name of machine



Public SSH key for a specified
machine that will allow the
administrator to enter the CLI
without a user name and
password

Existing SSH key

system administrators passwordless-access modify-sshkey
Modify a secure shell handling (SSH) key.

Format
system administrators passwordless-access modify-ssh-key 
 

226

CLI Commands

Arguments
Argument

Description

Format



Name of the user that will
become administrator

Length must be less than 97
characters



Name of machine



Public SSH key for a specified
machine that will allow the
administrator to enter the CLI
without a user name and
password

Existing SSH key

system background-operations recent
Display a list of recent background operations.

Format
system background-operations recent

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a list of recent background operations:
CLI> system background-operations recent

Output
.------------.------------------.---------.----------.----------.-----------------------.------------.-----------.---------.---------.
| Background | SessionId
|RequestId|RequestTag| Operation|
ObjectTyp
| StartTime | EndTime
| Rollback| Status |
| OperationID|
|
|
|
|
|
|
|
|
|
|------------|------------------|---------|----------|----------|-----------------------|------------|-----------|---------|---------|
| 5
| 51FFC00B63B05F297| 196
| Default | Action
|
RunSMBFileAccessibility| 05-Aug-14 | 05-Aug-13 | No
| Finished|
|
| E89465B0AC6FE3D |
|
|
|
Diagnostic
| 14:03:48
| 14:44:04 |
|
|
|------------|------------------|---------|----------|----------|-----------------------|------------|-----------|---------|---------|
| 4
| 51FFC00B63B05F29 | 190
| Default | Action
|
RunClientConnectivity | 05-Aug-14 | 05-Aug-13 | No
| Finished|

CLI Commands

227

|
| 7E9465B0AC6FE3D |
|
|
|
Diagn
| 13:33:59
| 14:14:20 |
|
|
|------------|------------------|---------|----------|----------|-----------------------|------------|-----------|---------|---------|
| 3
| 51DFC15C08EA1A7E9| 56275
| Default | Action
|
ServicePac
| 12-Jul-14 | 12-Jul-13 | No
| Finished|
|
| BAF0B871DB85E6A |
|
|
|
| 14:15:51
| 14:20:52 |
|
|
'------------'------------------'---------'----------'----------'-----------------------'------------'-----------'---------'---------'

system background-operations running
Display a list of running background operations.

Format
system background-operations running

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a list of the current running background operations:

Output
CLI> system background-operations running
Backgro
und
Operati
onID

Session
ID

Request
ID

Request
Tag

Operati
on

ObjectT
ype

StartTi
me

Rollbac
k

Progres
s

12

52010B0
C63B050
A55A954
5CB374A
0FB9

4

Default

Action

RunSMBF
ileAcce
ssibili
tyDiagn
ostic

06–
Aug-13
9:43:27

No

7

228

CLI Commands

system background-operations view-runningoperations-status
Display the status of running background operations according to a specific ID.

Format
system background-operations view-running-operations-status


Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command



ID of the background operation

Example
Display a list of running background operations:
CLI> system background-operations view-running-operations-status
BackgroundOperationID 14

Output
.------------.------------------.----------.-----------.----------.-----------.----------.----------.---------.---------.
| Backgroun | SessionId
| RequestId| RequestTag| Operation| ObjectType|
StartTime | EndTime | Rollback| Status |
| OperationI |
|
|
|
|
|
|
|
|
|
|------------|------------------|----------|-----------|----------|-----------|----------|----------|---------|---------|
| 14
| 51FFC00B63B05F297|122366
| Default
| Action
| Service
|
10-Dec-14 | 05-Aug-13| No
| Finished|
|
| E89465B0AC6FE3D |
|
|
| PackRun
|
14:03:48 | 14:44:04 |
|
|
|------------'------------------'----------'-----------'----------'-----------'----------'----------'---------'---------'

system background-operations wait-to-finish
Block the command prompt until the current background process completes or the specified timeout is
reached, whichever occurs first.

Format
system background-operations wait-to-finish 

CLI Commands

229

Arguments
Argument

Description

Format



Amount of time to block the
Whole positive number (in
command prompt waiting for the seconds)
background operation to finish

Example
Block the command prompt for 20 seconds or until the current background process completes,
whichever occurs first:
CLI> system background-operations wait-to-finish 20

system data-protection antivirus-scanners add
Add an antivirus server.

Format
system data-protection antivirus-scanners add  

Arguments
Argument

Description

Format



Antivirus server

Existing antivirus server host
name or IP address. An IP address
must be in IPv6 or IPv4 format. A
host name must contain one or
more sub names, each separated
by a dot. Each sub name can
contain letters, numbers, or
hyphens, but cannot start or end
in a hyphen.



Antivirus server port

Whole positive number

Example
Add an antivirus server with the host name av1.domain.com that the FluidFS cluster should connect to on
port 80:
CLI> system data-protection antivirus-scanners add av1.domain.com 80

230

CLI Commands

system data-protection antivirus-scanners delete
Delete an antivirus server.

Format
system data-protection antivirus-scanners delete  

Arguments
Argument

Description

Format



Antivirus server

Existing antivirus server host
name or IP address



Antivirus server port

Existing antivirus server port

Example
Delete an antivirus server with the host name av1.domain.com that the FluidFS cluster connects to on
port 80:
CLI> system data-protection antivirus-scanners delete av1.domain.com 80

system data-protection antivirus-scanners view
Display a list of antivirus servers.

Format
system data-protection antivirus-scanners view

Example
Display a current list of antivirus servers added to the FluidFS cluster:
CLI> system data-protection antivirus-scanners view

Output
Hosts =

.----------------.------.
| Name
| Port |
|----------------|------|
| 74.125.225.113 | 80
|
'----------------'------'

system data-protection cluster-partnerships add
Create a partnership between two FluidFS clusters.
NOTE: If two FluidFS clusters have a firewall between two them, TCP ports 10550, 10551, and 10561
–10576 should be open for the client VIPs and all NAS controller IP addresses.

CLI Commands

231

Format
system data-protection cluster-partnerships add  {options}

Arguments
Argument

Description

Format



IP address of the remote system

IP address in IPv6 or IPv4 format

Option

Description

Format

-UserName 

Administrator of the remote
system

Administrator user name of the
remote system

-Password 

Password of the remote system
administrator

Password of the remote system

Options

Example
Create a partnership with a FluidFS cluster that has the IP address 172.22.69.40 and has an administrator
named Administrator with the password Stor@ge!:
CLI> system data-protection cluster-partnerships add 172.22.69.40 -UserName
Administrator -Password Stor@ge!

system data-protection cluster-partnerships delete
Delete a partnership between two FluidFS clusters.

Format
system data-protection cluster-partnerships delete 

Arguments
Argument

Description

Format



Name of the remote system

Existing remote system name

Example
Delete a partnership with a FluidFS cluster named idffs2:
CLI> system data-protection cluster-partnerships delete idffs2

232

CLI Commands

system data-protection cluster-partnerships deletelocal-partnership-by-ID
Delete a cluster partnership by ID.
This command only deletes the partnerhip locally.

Format
system data-protection cluster-partnerships delete-local-partnership-by-ID


Arguments
Argument

Description

Format



Cluster ID

Existing cluster ID

Example
Delete a partnership with a FluidFS cluster ID of 12345:
CLI> system data-protection cluster-partnerships delete-local-partnership-by-ID
12345

system data-protection cluster-partnerships edit
Modify the partnership settings.

Format
system data-protection cluster-partnerships edit  {options}

Arguments
Argument

Description

Format



Name of the remote system

Existing remote system name

Option

Description

Format

-ClusterIP 

IP address of the remote system

IP address in IPv6 or IPv4 format

Options

Example
Modify the partnership with a FluidFS cluster named idffs1 to change the cluster IP address to
172.22.69.33:
CLI> system data-protection cluster-partnerships edit idffs1 -ClusterIP
172.22.69.33

CLI Commands

233

system data-protection cluster-partnerships list
Display a list of the FluidFS cluster’s partnerships.

Format
system data-protection cluster-partnerships list

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a current list of the FluidFS cluster’s partnerships:
CLI> system data-protection cluster-partnerships list

Output
.-------------------------.-------------------.-----------------.----------.
| Partner Id
| Remote System Name| Remote System Ip| Status
|
|-------------------------|-------------------|-----------------|----------|
| 497fd4e8-3855-46dc-af9a-|
|
|
|
|
1f9d8c723f13 | Sup2-6CC5J5J
| 172.41.2.95
| Available|
'-------------------------'-------------------'-----------------'----------'

system data-protection cluster-partnerships updateprotocol-version
Upgrade the communication type for a remote FluidFS cluster.

Format
system data-protection cluster-partnerships update-protocol-version
 {options}

Arguments
Argument

Description

Format



Name of the remote system

Existing remote system name

234

CLI Commands

Options
Option

Description

Format

-UserName 

Administrator of the remote
system

Administrator user name of the
remote system

-Password 

Password of the remote system
administrator

Password of the remote system

Example
Update the communication type for a remote FluidFS cluster named idffs2 that has an administrator
named Administrator with the password Stor@ge!:
CLI> system data-protection cluster-partnerships update-protocol-version idffs2
-UserName Administrator -Password Stor@ge!

system data-protection file-system resiliency disable
Disable file system metadata resiliency on new volumes.
This attribute applies to when the volume is created and the value is set to No.
NOTE: When a new volume is created, its resilience attributes for its lifetime are decided according
to the current value of this parameter.

Format
system data-protection file-system resiliency disable

system data-protection file-system resiliency enable
Enable file system metadata resiliency on volumes created when the value is set to Yes.
The attribute is applied to a volume when it is created, and is never changed for that volume.

Format
system data-protection file-system resiliency enable

system data-protection file-system resiliency view
Display file system resiliency configuration.
The configuration applies to volumes when they are created.

Format
system data-protection file-system resiliency view

CLI Commands

235

system data-protection NDMP-configuration edit
Modify NDMP settings.
NOTE: To delete DMA servers, you must provide an empty list in the form of ” ”.

Format
system data-protection NDMP-configuration edit {options}

Options
Option

Description

Format

-DMAServers 

DMA servers

Comma-separated list of IP
addresses in IPv4 or IPv6 format

-ClientPort 

Client port number

Whole positive number

Example
Add an NDMP server with the IP address 74.125.225.113 that uses the client port number 10000:
CLI> system data-protection NDMP-configuration edit -DMAServers 74.125.225.113 ClientPort 10000

system data-protection NDMP-configuration updateuser
Modify NDMP user settings (name and password).

Format
system data-protection NDMP-configuration update-user  {options}

Arguments
Argument

Description

Format



NDMP user name

Maximum length of 64
characters, and can contain
letters, numbers, and
underscores

Option

Description

Format

-Password 

NDMP user password

Must include at least seven
characters and should contain at
least three of the following

Options

236

CLI Commands

Option

Description

Format
character types: lowercase
character, uppercase character,
digit, special characters (for
example, +, ?, and *)

Example
Change the NDMP username to backupuser and password to Password123:
CLI> system data-protection NDMP-configuration update-user backupuser -Password
Password123

system data-protection NDMP-configuration view
Display NDMP settings.

Format
system data-protection NDMP-configuration view

Example
Display the current NDMP settings:
CLI> system data-protection NDMP-configuration view

Output
DMAServers = 74.125.225.113
User Name
= backup_user
Client Port = 10000

system data-protection QOS add
Create a new QoS entity with name and bandwidth allocations.

Format
system data-protection QOS add  {speed}

Arguments
Argument

Description



QOS entity name

Format

Options
Option

Description

-Limitation_speed 

Bandwidth allocation as KBps

CLI Commands

Format

237

Example
Create a new QoS entity with name Entity1 and bandwidth speed 100 KBps:
CLI> system data-protection QOS add Entity1 -Name -100KBps speed

system data-protection QOS delete
Delete a QoS entity.

Format
system data-protection QOS delete  {speed}

Arguments
Argument

Description



QOS entity name

Format

Example
Delete a QoS entity with name Entity1:
CLI> system data-protection QOS delete Entity1 -Name

system data-protection QOS list
List all the QoS entries.

Format
system data-protection QOS list

Arguments
Argument

Description



QOS entity name

Format

Options
Option

Description

-Limitation_speed 

Bandwidth allocation as KBps

Format

Example
List all the QoS entities:
CLI> system data-protection QOS list

238

CLI Commands

system data-protection QOS modify
Modify a QoS entity.

Format
system data-protection QOS modify  {speed} {new name}

Arguments
Argument

Description



QoS entity name

Format

Options
Option

Description

-Limitation_speed 

Bandwidth allocation as KBps

-new name 

New QoS name

Format

Example
Change the name of a QoS entity to NewName:
CLI> system data-protection QOS modify Entity1 -Name

NewName -new name

system data-protection QOS modify-schedule
Modify a limited timespan (hour) for some or all days in a QoS (quality of service) schedule.

Format
system data-protection QOS modify-schedule   [Monday] [Tuesday]
[Wednesday] [Thursday] [Friday] [Saturday] [Sunday]

Arguments
Argument

Description



QoS entity name



Hour in a day

CLI Commands

Format

0–23

239

Options
Option

Description

Format

-Monday, -Tuesday, Bandwidth allocation percentage 10–100%
Wednesday, -Thursday, -Friday, Saturday, -Sunday
-new name 

New QoS name

Example
Change the limited hour on Mondays:
CLI> system data-protection QOS modify-schedule Entity1 -name

Monday -hour

system data-protection QOS view
View details of a QoS entity.

Format
system data-protection QOS view 

Arguments
Argument

Description



QOS entity name

Format

Example
View details of Entity1:
CLI> system data-protection QOS view Entity1

system data-protection tape-devices add
Add a new Fibre Channel tape device.
The device should be configured to use a dynamic block size.

Format
system data-protection tape-devices add  

Arguments
Argument

Description

Format



Name of the tape device

The name is the physical ID of
the device, and needs to include

240

CLI Commands

Argument

Description

Format
the device type, model, SCSI ID,
and the destination port of the
tape drive.



Type of tape device

Possible values are Tape (actual
tape), Library (media library)

Example
Add a new tape device:
CLI> system data-protection tape-devices add tape:IBM:ULT3580-HH4 tape

system data-protection tape-devices delete
Delete a Fibre Channel tape device.

Format
system data-protection tape-devices delete 

Argument
Argument

Description

Format



Name of the tape device

Existing tape device name

Example
Delete a tape device:
CLI> system data-protection tape-devices delete tape:IBM:ULT3580-HH4

system data-protection tape-devices edit
Modify the settings for a Fibre Channel tape device.

Format
system data-protection tape-devices modify  -DeviceType

Argument
Argument

Description

Format



Name of the tape device

Existing tape device name

CLI Commands

241

Option
Option

Description

Format

-DeviceType 

Type of tape device

Possible values are Tape (actual
tape), Library (media library)

Example
Modify a tape device:
CLI> system data-protection tape-devices modify tape:IBM:ULT3580-HH4 DeviceType tape

system data-protection tape-devices list
List all Fibre Channel tape devices.

Format
system data-protection tape-devices list

Example
Display a list of all tape devices:
CLI> system data-protection tape-devices list

Output
Name
Device type
Status summary
Controller status

=
=
=
=

Name of tape device
Type of tape device
Accessibility status (Optimal, Partial, Fail)
Status of each controller (Connected, Not connected, N/A)

system data-protection tape-devices view
View a new Fibre Channel tape device.

Format
system data-protection tape-devices view 

Arguments
Argument

Description

Format



Name of the tape device

Existing name of tape device

242

CLI Commands

Example
View information about a new tape device:
CLI> system data-protection tape-devices view tape:IBM:ULT3580-HH4

Output
Name
Device type
Status summary
Controller status

=
=
=
=

Name of tape device
Type of tape device
Accessibility status (Optimal, Partial, Fail)
Status of each controller (Connected, Not connected, N/A)

system EM recipients add
Add an EM recipient.
CAUTION: This command should be used only by Dell Technical Support.

Format
system EM recipients add    

Arguments
Argument

Description

Format



URL or IP address of the EM data
collector

Comma‐separated list of
recipients. Must be less than 255
characters.



Indicates for EM if this Data
Collector is actively managed by
this cluster



Indicates if this Data Collector
expects to receive events from
the cluster



GUID of data collector or empty
string

Example
Add an EM recipient https://172.22.69.18:3033/dsfsevent:
CLI> system EM recipients add https://172.22.69.18:3033/dsfseventYes Yes

system EM recipients delete
Delete EM recipients.
CAUTION: This command should be used only by Dell Technical Support.

CLI Commands

243

Format
system EM recipients delete 

Arguments
Argument

Description

Format



URL or IP address of the EM data
collector

Comma‐separated list of
recipients. Must be less than 255
characters.

Example
Delete an EM recipient https://172.22.69.18:3033/dsfsevent:
CLI> system EM recipients delete https://172.22.69.18:3033

system EM recipients edit
Modify the EM recipients.
CAUTION: This command should be used only by Dell Technical Support.

Format
system EM recipients edit 

Arguments
Argument

Description

Format



EM recipients

Comma‐separated list of
recipients. Must be less than 255
characters.

Example
Add an EM recipient https://172.22.69.18:3033/dsfsevent:
CLI> system EM recipients edit https://172.22.69.18:3033/dsfsevent

system EM recipients view
Display the EM recipients configuration.

Format
system EM recipients view

244

CLI Commands

Example
Display the current EM recipients configuration:
CLI> system EM recipients view

Output
.-------------------------.----------------------------.----------.-------------------.
| URL
| Data Collector ID
| Is Active| Is Events Receiver|
|-------------------------|----------------------------|----------|-------------------|
| https://10.48.29.1:3033/| 782703d4-4b17-4b3f-9539-45e| Yes
| Yes
|
| /dsfsevent
|3ad5a084
| Yes
| Yes
|
|-------------------------|----------------------------|----------|-------------------|
| https://172.41.200.16: | cedbc17f-f5e5-437e-bef8-7b | No
| Yes
|
| 3033/dsfsevent
| 30648602ad
| Yes
| Yes
|
|-------------------------|----------------------------|----------|-------------------|
| https://10.48.29.1:3033 | 782703d4-4b17-4b3f-9539-45 | Yes
| Yes
|
| /dsfsevent
| ef3ad5a084
| Yes
| Yes
|
'-------------------------'----------------------------'----------'-------------------'

system event-filter update-filter
Modify the event filter settings.

Format
system event-filter update-filter  {options}

Arguments
Argument

Description

Format



Workspace to which the events
belong

Possible values are
((enums.EventWorkspace))

Option

Description

Format

-Enabled 

Indicate whether SNMP traps
should be sent for the events
from this workspace. The
optional values are Yes or No.

-Severity

Severity of the events that will be
sent as SNMP traps from this
workspace. Possible values are
((enums.FilterLevel)).

Options

CLI Commands

245

system event-filter view
Display the event filter settings.

Format
system event-filter view

Output
.----------------------------.---------.----------.
| Workspace
| Enabled | Severity |
|----------------------------|---------|----------|
| NasVolumes
| Yes
| All
|
|----------------------------|---------|----------|
| AccessControl
| Yes
| All
|
|----------------------------|---------|----------|
| Performance & Connectivity | Yes
| All
|
|----------------------------|---------|----------|
| Hardware
| Yes
| All
|
|----------------------------|---------|----------|
| System
| Yes
| All
|
|----------------------------|---------|----------|
| SACL Audit
| Yes
| All
|
'----------------------------'---------'----------'

system file-access-notifications disable
Disable file access notifications.

Format
system file-access-notifications disable

Example
Disable external auditing of the system:
CLI> system file-access-notifications disable

system file-access-notifications enable
Enables external auditing.

Format
system file-access-notifications enable

Example
Enable external auditing of the system:
CLI> system file-access-notifications enable

246

CLI Commands

system file-access-notifications view
View external auditing status.

Format
system file-access-notifications view

Example
View external auditing status:
CLI> system file-access-notifications view

Output
Allow external servers auditing = Yes/No

system file-access-notifications subscribers add
Add an external auditing subscriber to file access notifications.

Format
system file-access-notifications subscribers add

Arguments
Argument

Description



Auditing servers cluster unique
name



Auditing server port used for
FluidFS Notify interface



Enable or disable RPC encryption

 (optional)

Security blob used for RPC
encryption



List of IP addresses or host
names of the auditing servers

Format

Comma-separated list of IPs

Example
Add a subscriber to file access notifications:
CLI> system file-access-notifications  add

CLI Commands

247

system file-access-notifications subscribers delete
Delete an external auditing subscriber from the file access notifications list.

Format
system file-access-notifications subscribers delete

Example
Delete an external auditing status:
CLI> system file-access-notifications  delete

Arguments
Argument

Description



Auditing servers cluster unique
name

Format

system file-access-notifications subscribers edit
Edit external auditing subscriber settings such as IP or port.

Format
system file-access-notifications subscribers edit

Example
View the external auditing status:
CLI> system file-access-notifications  edit 

Arguments
Argument

Description



Auditing servers cluster unique
name



Auditing server port used for
FluidFS Notify interface



Enable or disable RPC encryption

 (optional)

Security blob used for RPC
encryption



List of IP addresses or host
names of the auditing servers

248

Format

Comma-separated list of IPs

CLI Commands

system file-access-notifications subscribers list
List all the auditing subscribers configured to receive file-access notifications.

Format
system file-access-notifications subscribers list

Example
View the external auditing status:
CLI> system file-access-notifications subscribers list

system-internal BMC-network disable
Disable BMC network settings.

Format
system-internal BMC-network disable   

Arguments
Argument

Description

Format



Comma-separated list of IP
addresses (IP address for each
NAS controller)

Existing network IP address in
IPv6 or IPv4 format



Netmask (IPv4) or Prefix (IPv6) of
the BMC network

Existing network netmask or
prefix



Gateway for the BMC network

IP address in IPv6 or IPv4 format

system-internal BMC-network edit
Edit the BMC network settings.

Format
system-internal BMC-network edit [options]

Arguments
Argument

Description

Format



Comma-separated list of IP
addresses (IP address for each
NAS controller)

Existing network IP address



Netmask of the BMC network

Existing network netmask

CLI Commands

249

Argument

Description

Format



Gateway for the BMC network

IP address in IPv4 format

system-internal BMC-network enable
Enable BMC network settings.

Format
system-internal BMC-network enable [Options]

Arguments
Argument

Description

Format



Comma-separated list of IP
addresses (IP address for each
NAS controller)

Existing network IP address in
IPv4 format



Netmask of the BMC network

Existing network netmask



Gateway for the BMC network

IP address in IPv4 format

system-internal BMC-network view
Display the BMC network settings.

Format
system-internal BMC-network view

Output
Enabled
IPs
Netmask
Gateway

= No
=
= 255.255.255.0
= 0.0.0.0

system internal cluster-name set
Modify the FluidFS cluster name.

Format
system internal cluster-name set 

Arguments
Argument

Description

Format



New FluidFS cluster name

Starts with a letter, and can
contain letters, digits,

250

CLI Commands

Argument

Description

Format
underscores and hyphens, but
cannot end in a hyphen. It can be
up to 15 characters long.

Example
Change the FluidFS cluster name to idffs1:
CLI> system internal cluster-name set idffs1

system internal cluster-name view
Display the FluidFS cluster name.

Format
system internal cluster-name view

Example
Display the current FluidFS cluster name:
CLI> system internal cluster-name view

Output
Cluster Name = idffs2

system internal diagnostics list
Display the list of diagnostics.

Format
system internal diagnostics list

Option
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a list of available diagnostics:
CLI> system internal diagnostics list

CLI Commands

251

Output
-------------------.-------.----------.-----------------------------.--------------------------------.
| Diagnostics Name | Status| Last
| File name of main Diagnostics| File name of Logs Diagnostics|
|------------------|-------|-----------|------------------------------|------------------------------|
| General
| Idle | 29-O
| Summary.3859981732.29_10_20 | Logs.3859981732.29_10_2014- |
|
|
| 12:46
| 14-12_46_39.tar.gz
| 12_46_39.tar.gz
|
|------------------|-------|-----------|------------------------------|------------------------------|
| File system core | Idle | 25-Nov-14 | Summary.3690686228.25_11_
| Logs.3690686228.25_11_2014- |
| General
|
| 14:14:20 | 14-14_14_20.tar.gz
| 14_14_20.tar.gz
|
|------------------|-------|-----------|------------------------------|------------------------------|
| Network
| Idle |
|
|
|
|------------------|-------|-----------|------------------------------|------------------------------|
| Performance
| Idle |
|
|
|
|------------------|-------|-----------|------------------------------|------------------------------|
|Client connectivity |Idle |
|
|
|
|------------------|-------|-----------|------------------------------|------------------------------|
|File accessibility | Idle |
|
|
|
|------------------|-------|-----------|------------------------------|------------------------------|
| SMB and NFS
| Idle |
|
|
|
'------------------'-------'-----------'------------------------------'------------------------------'

system internal diagnostics run-client-connectivitydiagnostic
Run the client connectivity diagnostic for an SMB or NFS client.
In case of a client connectivity problem, ask the client to try connecting after the diagnostic is run. The
diagnostic files should be downloaded by FTP from the following directory:
ftp://@:44421/diagnostic/archive/
ClientConnectivityDiagnostic/
NOTE: FTP is enabled by default on the FluidFS cluster. However, if FTP has been disabled, see
system internal security FTP configuration enable to re-enable FTP before using this command.

Format
system internal diagnostics run-client-connectivity-diagnostic 


Arguments
Argument

Description

Format



IP address of the client

Existing client IP address in IPv6
or IPv4 format



Client protocol

Possible values are SMB, NFS

-RepositoryType


Type of repository on which to
run diagnostics

RepositoryType can be
NAS_VOLUME or FTP. If it is
NAS_VOLUME, then the values of
RepositoryVolume and
RepositoryPath determine where
the files will be stored. The files
can then be accessed by a share
or export to the volume.

-RepositoryVolume


Volume on the repository on
which to run diagnostics

252

CLI Commands

Argument

Description

Format

-RepositoryPath


Path of the repository on which
to run diagnostics

If it is FTP, the diagnostics should
be transferred from the cluster
via ftp under ftp://
(UserName)@(ClusterVIP):44421/
diagnostics/archive/.

Example
Run the client connectivity diagnostic for an SMB client with the IP address 172.22.69.18:
CLI> system internal diagnostics run-client-connectivity-diagnostic
172.22.69.18 SMB

system internal diagnostics run-file-system-diagnostic
Run the core file-system diagnostic.
If the problem occurs only while certain activity is running against the FluidFS cluster, retry after the
diagnostic is run. The diagnostic files should be downloaded by FTP from the following directory:
ftp://@:44421/diagnostic/archive/
FileSystemDiagnostic/
NOTE: FTP is enabled by default on the FluidFS cluster. However, if FTP has been disabled, see
system internal security FTP configuration enable to reenable FTP before using this
command.

Format
system internal diagnostics run-file-system-diagnostic

Arguments
Argument

Description

Format



IP address of the client

Existing client IP address in IPv6
or IPv4 format



Client protocol

Possible values are SMB,, NFS

-RepositoryType


Type of repository on which to
run diagnostics

RepositoryType can be
NAS_VOLUME or FTP. If it is
NAS_VOLUME, then the values of
RepositoryVolume and
RepositoryPath determine where
the files will be stored. The files
can then be accessed by a share
or export to the volume.

-RepositoryVolume


Volume on the repository on
which to run diagnostics

CLI Commands

253

Argument

Description

Format

-RepositoryPath


Path of the repository on which
to run diagnostics

If it is FTP, the diagnostics should
be transferred from the cluster
via ftp under ftp://
(UserName)@(ClusterVIP):44421/
diagnostics/archive/.

Example
Run the core file-system diagnostic:
CLI> system internal diagnostics run-file-system-diagnostic -RepositoryType
TypeA

system internal diagnostics run-general-diagnostic
Run the general diagnostic.
The diagnostic files should be downloaded by FTP from the following directory:
ftp://@:44421/diagnostic/archive/
GeneralSystemDiagnostic/
NOTE: FTP is enabled by default on the FluidFS cluster. However, if FTP has been disabled, see
system internal security FTP configuration enable to reenable FTP before using this
command.

Format
CLI> system internal diagnostics run-general-diagnostic

Arguments
Argument

Description

Format



IP address of the client

Existing client IP address in IPv6
or IPv4 format



Client protocol

Possible values are SMB, NFS

-RepositoryType


Type of repository on which to
run diagnostics

RepositoryType can be
NAS_VOLUME or FTP. If it is
NAS_VOLUME, then the values of
RepositoryVolume and
RepositoryPath determine where
the files will be stored. The files
can then be accessed by a share
or export to the volume.

-RepositoryVolume


Volume on the repository on
which to run diagnostics

254

CLI Commands

Argument

Description

Format

-RepositoryPath


Path of the repository on which
to run diagnostics

If it is FTP, the diagnostics should
be transferred from the cluster
via ftp under ftp://
(UserName)@(ClusterVIP):44421/
diagnostics/archive/.

Example
Run the general diagnostic:
system internal diagnostics run-general-diagnostic

system internal diagnostics run-network-diagnostic
Run the networking diagnostic.
In case of a client connectivity problem, ask the client to repeat their attempt to connect to the FluidFS
cluster after the diagnostic is run. The diagnostic files should be downloaded by FTP from the following
directory:
ftp://@:44421/diagnostic/archive/
NetworkDiagnostic/
NOTE: FTP is enabled by default on the FluidFS cluster. However, if FTP has been disabled, see
system internal security FTP configuration enable to reenable FTP before using this
command.

Format
system internal diagnostics run-network-diagnostic [options]

Arguments


IP address of
the client

Existing client
IP address in
IPv6 or IPv4
foromat

Argument

Description

Format



Client protocol

Possible values
are SMB,, NFS



IP address of
the client

Existing client
IP address in
IPv6 or IPv4
format

RepositoryType


Type of
repository on
which to run
diagnostics

RepositoryType 
repository on
NAS_VOLUME
which to run
or FTP. If it is
network
NAS_VOLUME,
diagnostic
then the values
of
RepositoryVolu

CLI Commands

255



IP address of
the client

Existing client
IP address in
IPv6 or IPv4
foromat

Argument

Description



Volume of
repository on
which to run
network
diagnostic

If it is FTP, the

should be
transferred
from the cluster
via ftp under
ftp://
(UserName)@(C
lusterVIP):
44421/
diagnostics/
archive/.

Path of
repository on
which to run
network
diagnostic

Format

me and
RepositoryPath
determine
where the files
will be stored.
The files can
then be
accessed by a
share or export
to the volume.
RepositoryVolu
me


Volume on the
repository on
which to run
diagnostics

RepositoryPath


Path of the
repository on
which to run
diagnostics

Example
Run the networking diagnostic for a client with the IP address 172.22.69.18 on repository volume A:
CLI> system internal diagnostics run-network-diagnostic 172.22.69.18 RepositoryType NAS_VOLUME -RepositoryVolume jvol1 -RepositoryPath /mydiags

system internal diagnostics run-nfs-file-accessibilitydiagnostic
Run the file-accessibility diagnostic for an NFS client.
In case of a file accessibility problem, ask the client to try accessing the file once the diagnostic is run.
The diagnostic files should be downloaded by FTP from the following directory:
ftp://@:44421/diagnostic/archive/
FileAccessibilityDiagnostic/

256

CLI Commands

NOTE: FTP is enabled by default on the FluidFS cluster. However, if FTP has been disabled, see
system internal security FTP configuration enable to reenable FTP before using this
command.

Format
system internal diagnostics run-nfs-file-accessibility-diagnostic 
  

Arguments
Argument

Description

Format



IP address of the client

Existing client IP address in the
format: x.x.x.x



NFS export path

Existing NFS export path



NAS volume name

Existing NAS volume name



File path (relative to NFS export
path)

Existing file path



Type of repository on which to
run file accessibility diagnostics



Volume of repository on which to
run file accessibility diagnostics



Path of repository on which to
run file accessibility diagnostics

Example
Run the file-accessibility diagnostic for an NFS client with the IP address 172.22.69.18 to an NFS export at
the path /folder on a NAS volume named vol1 with the relative file path subfolder:
CLI> system internal diagnostics run-nfs-file-accessibility-diagnostic
172.22.69.18 /folder vol1 subfolder

system internal diagnostics run-performance-diagnostic
Run the performance diagnostic on a NAS volume.
If possible, run the diagnostic when the activity on the FluidFS cluster is minimal. The diagnostic files
should be downloaded by FTP from the following directory:
ftp://@:44421/diagnostic/archive/
PerformanceDiagnostic/
NOTE: FTP is enabled by default on the FluidFS cluster. However, if FTP has been disabled, see
system internal security FTP configuration enable to re-enable FTP before using this command.

CLI Commands

257

Format
system internal diagnostics run-performance-diagnostic 

Arguments


IP address of
the client

Existing client
IP address in
IPv6 or IPv4
foromat

Argument

Description

Format



Client protocol

Possible values
are SMB,, NFS



NAS volume
name

Existing NAS
volume name

RepositoryType


Type of
repository on
which to run
diagnostics

RepositoryType 
repository on
NAS_VOLUME
which to run
or FTP. If it is
performance
NAS_VOLUME,
diagnostic
then the values
of
RepositoryVolu
me and
RepositoryPath
determine
where the files
will be stored.
The files can
then be
accessed by a
share or export
to the volume.

RepositoryVolu
me


Volume on the
repository on
which to run
diagnostics

RepositoryPath


Path of the
repository on
which to run
diagnostics

258



Volume of
repository on
which to run
performance
diagnostic

If it is FTP, the

should be
transferred
from the cluster
via ftp under
ftp://
(UserName)@(C
lusterVIP):
44421/
diagnostics/
archive/.

Path of
repository on
which to run
performance
diagnostic

CLI Commands

Example
Run the performance diagnostic on a NAS volume named vol1:
CLI> system internal diagnostics run-performance-diagnostic vol1

system internal diagnostics run-smb-and-nfsdiagnostic
Run the general SMB and NFS diagnostic.
If the problem happens only while certain activity is running against the cluster, repeat it after the activity
has finished. For NAS Volume repository, use SMB-Share or NFS-Export. The diagnostic files can be
downloaded by FTP from the following directory:
ftp://@:44421/diagnostic/archive/
ProtocolsLogsDiagnostic/
NOTE: FTP is enabled by default on the FluidFS cluster. However, if FTP has been disabled, see
system internal security FTP configuration enable to reenable FTP before using this
command.

Format
CLI> system internal diagnostics run-smb-and-nfs-diagnostic

system internal diagnostics run-SMB-file-accessibilitydiagnostic
Run the file-accessibility diagnostic for an SMB client.
In case of a file-accessibility problem, ask the client to try accessing the file after the diagnostic is run.
The diagnostic files should be downloaded by FTP from the following directory:
ftp://@:44421/diagnostic/archive/
FileAccessibilityDiagnostic/
NOTE: FTP is enabled by default on the FluidFS cluster. However, if FTP has been disabled, see
system internal security FTP configuration enable to reenable FTP before using this command.

Format
system internal diagnostics run-SMB-file-accessibility-diagnostic 
 

Arguments
Argument

Description

Format



IP address of the client

Existing client IP address in IPv6
or IPv4 format



SMB share name

Existing SMB share name

CLI Commands

259

Argument

Description

Format



Client protocol

Possible values are SMB,, NFS

-RepositoryType


Type of repository on which to
run diagnostics

RepositoryType can be
NAS_VOLUME or FTP. If it is
NAS_VOLUME, then the values of
RepositoryVolume and
RepositoryPath determine where
the files will be stored. The files
can then be accessed by a share
or export to the volume.

-RepositoryVolume


Volume on the repository on
which to run diagnostics

-RepositoryPath


Path of the repository on which
to run diagnostics

If it is FTP, the diagnostics should
be transferred from the cluster
via ftp under ftp://
(UserName)@(ClusterVIP):44421/
diagnostics/archive/.

Example
Run the file-accessibility diagnostic for an SMB client with the IP address 172.22.69.18 to a file on an SMB
share named share1 at the relative file path subfolder:
CLI> system internal diagnostics run-smb-file-accessibility-diagnostic
172.22.69.18 share1 subfolder

system internal diagnostics view
View details about a single diagnostic.

Format
system internal diagnostics view 

Arguments
Argument

Description

Format



Name of the diagnostic

Possible values are
ClientConnectivity,
FileAccessibility, FileSystemCore,
General, Network, Performance,
SMB-andNFS

Example
View details about the Network diagnostic:
CLI> system internal diagnostics view Network

260

CLI Commands

Output
Diagnostic Name
Status
Last Run
File Name General Diagnostic

=
=
=
=

Network
DiagIdle
11-May-13 12:33:33
Summary.90fb2eb6-d44d-4440-abd8-adba59cb1101.
11_05_2013-12_33_06.tar.gz
File Name Logs Diagnostic
= Logs.90fb2eb6-d44d-4440-abd8-adba59cb1101.11_
05_2013-12_26_57.tar.gz
File size of general diagnostic = 19
File size of logs diagnostic
= 98
Is Advanced Diagnostic Package Full = Yes

system internal file-system background-processes
configuration data-reduction set
Modify the data reduction settings.

Format
system internal file-system background-processes configuration data-reduction
set [options]

Options
Option

Description

Format

-EnableDataReduction


Indicate whether data reduction
is enabled

Possible values are Yes, No

-StartingHour 

Starting time of the data
reduction background process

Zero-based, whole positive
number (0 to 23)

-Duration 

Number of hours that the data
reduction background process
will run

Whole positive number (1 to 24)

Example
Enable data reduction to start at 23:00:00 and run for 6 hours:
CLI> system internal file-system background-processes configuration datareduction set -EnableDataReduction Yes -StartingHour 23 -Duration

system internal file-system background-processes
configuration data-reduction view
Display the data reduction settings.

Format
system internal file-system background-processes configuration data-reduction
view

CLI Commands

261

Example
Display the current data reduction settings:
CLI> system internal file-system background-processes configuration datareduction view

Output
Enable Data Reduction = Yes
Starting Hour
= 23
Duration in Hours
= 6

system internal file-system background-processes
configuration health-scan set
Modify the health scan settings.
CAUTION: Dell recommends keeping the health scan throttling mode set to Normal unless
specifically directed otherwise by Dell Technical Support.

Format
system internal file-system background-processes configuration health-scan set
{options}

Options
Option

Description

Format

‐Throttling 

Throttling of the health scan that
runs as a background process

Possible values are
MaintenanceMode, NormalMode,
Off

‐Crossref 

Indicate whether the health scan
will check cross reference file
mappings

Possible values are Yes, No

Example
Enable the health scan to run in normal mode:
CLI> system internal file-system background-processes configuration healthscan
set -Throttling NormalMode

262

CLI Commands

system internal file-system background-processes
configuration health-scan view
Display the health scan settings.

Format
system internal file-system background-processes configuration health-scan view

Example
Display the current health scan settings:
CLI> system internal file-system background-processes
configuration health-scan view

Output
Throttling = Normal mode
Crossref
= Yes

system internal file-system background-processes list
Display a list of background processes with their status.

Format
system internal file-system background-processes list

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a list of the current background processes with their status:
CLI> system internal file-system background-processes list

Output
.--------------------.--------.
| Background Process | Status |
|--------------------|--------|
| Data Reduction
| Idle
|
|--------------------|--------|
| Health Scan
| Idle
|
'--------------------'--------'

CLI Commands

263

system internal file-system background-processes view
Display the status of a background process.

Format
system internal file-system background-processes view 

Arguments
Argument

Description

Format



Name of the background process Possible values are
DataReduction, HealthScan

Example
Display the status of a background process named DataReduction:
CLI> system internal file-system background-processes view DataReduction

Output
Backgr = Data Reduction
Status = Idle

system internal file-system domains list
Display a list of NAS appliances and their cache status.

Format
system internal file-system domains list

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a current list of NAS appliances and their cache status:
CLI> system internal file-system domains list

Output
.---------------.----------------.----------------.---------.----------------.
| NAS Appliance | Write Through | Write Cache
|Status | DomainsInfo
|

264

CLI Commands

| ID
| Mode
| Usage
|
|
|
|---------------|----------------|----------------|--------|----------------|
| 1
| Mirroring
| 0
|Running | .---.---.-... |
|
|
|
|
| | D | R | ... |
|
|
|
|
| | o | u | ... |
|
|
|
|
| | m | n | ... |
|
|
|
|
| | a | n | ... |
|
|
|
|
| | i | i | ... |
|
|
|
|
| | n | n | ... |
|
|
|
|
| | I | g | ... |
|
|
|
|
| | D | N | ... |
|
|
|
|
| |
| o | ... |
|
|
|
|
| |
| d | ... |
|
|
|
|
| |
| e | ... |
|
|
|
|
| |
|
| ... |
|
|
|
|
| |
|
| ... |
|
|
|
|
| |
|
| ... |
|
|
|
|
| |
|
| ... |
|
|
|
|
| |
|
| ... |
|
|
|
|
| |---|---|-... |
|
|
|
|
| | 0 | 0 | ... |
|
|
|
|
| |
|
| ... |
|
|
|
|
| |
|
| ... |
|
|
|
|
| |
|
| ... |
|
|
|
|
| |
|
| ... |
|
|
|
|
| |
|
| ... |
|
|
|
|
| |
|
| ... |
|
|
|
|
| |
|
| ... |
|
|
|
|
| |
|
| ... |
|
|
|
|
| |---|---|-... |
|
|
|
|
| | 1 | 1 | ... |
...[snip]...

system internal file-system domains view
Display information about a cache of a single NAS appliance.

Format
system internal file-system domains view 

Arguments
Argument

Description

Format



NAS appliance ID

Existing NAS appliance ID

Example
Display information about a cache of a NAS appliance with the ID 1:
CLI> system internal file-system domains view 1

Output
NAS Appliance ID
Write Through Mode
Write Cache Usage
Status

CLI Commands

=
=
=
=

1
Mirroring
0
Running

265

DomainsInfo

...[snip]...

=

.--------.--------.--------.--------.---------.--------.
| Domain | Runnin | Preffe | Write | Write
| Status |
| ID
| g Node | red
| Through| Cache
|
|
|
|
| Node
| Mode
| Usage
|
|
|--------|--------|--------|--------|---------|--------|
| 0
| 0
| 0
| Mirrori| 0
| Runnin |
|
|
|
| ng
|
| g
|
|--------|--------|--------|--------|---------|--------|
| 1
| 1
| 1
| Mirrori| 0
| Runnin |
|
|
|
| ng
|
| g
|
|--------|--------|--------|--------|---------|--------|
| 2
| 0
| 0
| Mirrori| 0
| Runnin |
|
|
|
| ng
|
| g
|
|--------|--------|--------|--------|---------|--------|
| 3
| 1
| 1
| Mirrori| 0
| Runnin |
|
|
|
| ng
|
| g
|
|--------|--------|--------|--------|---------|--------|

system internal file-system internal-storage-reservation
view
Display internal storage reservation information.

Format
system internal file-system internal-storage-reservation view

Example
Display current internal storage reservation information:
CLI> system internal file-system internal-storage-reservation view

Output
File System Domains Reservation
Storage Management Reservation
File System Health Scan Reservation
Data Reduction Reservation
Total Reservation
Total Percentage Reservation

=
=
=
=
=
=

251.89 GB
36.00 GB
10.24 GB
10.00 GB
308.13 GB
15

system internal file-system service-mode set
Modify the system serviceability mode.

Format
system internal file-system service-mode set 

266

CLI Commands

Arguments
Argument

Description

Format



Indicate in which mode the
FluidFS cluster should work

Possible values are NoService,
Normal, Write‑throughOn

Example
Change the system serviceability mode to Normal:
CLI> system internal file-system service-mode set Normal

system internal file-system service-mode view
Display the system serviceability mode settings.

Format
system internal file-system service-mode view

Example
Display the current system serviceability mode settings:
CLI> system internal file-system service-mode view

Output
State = Normal

system internal internal-network edit
Modify the internal network settings (class C subnet).

Format
system internal internal-network edit 

Arguments
Argument

Description

Format



Internal network ID

IP address in the format: x.x.x.x

Example
Change the internal network to 10.255.254.0:
CLI> system internal internal-network edit 10.255.254.0

CLI Commands

267

system internal language set
Modify the language of the FluidFS cluster.

Format
system internal language set 

Arguments
Argument

Description

Format



Language of the FluidFS cluster

Possible value is English

Example
Modify the language of the FluidFS cluster to English:
CLI> system internal language set English

system internal language view
Display the language of the FluidFS cluster.

Format
system internal language view

Example
Display the current language of the FluidFS cluster:
CLI> system internal language view

Output
Language = English

system-internal protocols-settings NFS-settings edit
Modify the general settings of the NFS protocol.

Format
system-internal protocols-settings NFS-settings edit {options}

268

CLI Commands

Options
Option

Description

Format

-MaxNFSVersionSupported


Maximum version of NFS
supported by system
(configuration restrictions)

Possible values are NFSv3, NFSv4,
and NFSv4.1

Example
Set the maximum NFS version supported on a cluster:
CLI> system-internal protocols-settings NFS-settings edit MaxNfsVersionSupported

system internal protocols-settings NFS-settings view
Display the general settings of the NFS protocol.

Format
System internal protocols-settings NFS-settings view

Example
Display the current general settings of the NFS protocol:
CLI> system internal protocols-settings NFS-settings view

Output
Local Accounts Password Never Expires = No
Local Accounts Max Password Age
= 6 Weeks
Check Password Complexity
= Yes

system-internal protocols-settings SMB-settings edit
Modify the general settings of the SMB protocol.

Format
system-internal protocols-settings SMB-settings edit {options}

Options
Option

Description

Indicate whether the local
LocalAccountsPasswordNeverE accounts password never expires
xpires

CLI Commands

Format
Possible values are Yes, No

269

Option

Description

Format


Local accounts maximum
LocalAccountsMaxPasswordAg password age
e


Integer number with suffix of units
H/D/W (hours, days, or weeks) (for
example, 10H)

-CheckPasswordComplexity


Indicate whether the
password‑complexity checks
should be enforced

Possible values are Yes, No

-RequireMessageSigning


Defines whether SMB3 traffic
connected to any share is required
to be signed

-RequireMessageEncryption


Defines whether SMB3 traffic
connected to any share is required
to be encrypted

-MaxSmbVersinoSupported


Maximum version of SMB
supported by system
(configuration restrictions)

Possible values are
((enums.SmbVersion))

-ForceLeaseRestriction


Restricts leases

Enable or Disable

-ForceOplocksRestriction


Restricts opportunistic locks

Enable or Disable

-DisconnectIdleSessions


Disconnects idle sessions

Possible values are Yes, No

-IdleSessionTimeout


SMB idle session will be
automatically disconnected after
the timeout is reached.

Whole positive number (in
seconds)

-IdleSessionsScanInterval


SMB sessions scan for idle
sessions interval.

Whole positive number

Example
Enforce password-complexity checks for FluidFS users:
CLI> system-internal protocols-settings SMB-settings edit CheckPasswordComplexity Yes

270

CLI Commands

system-internal protocols-settings SMB-settings view
Display the general settings for the SMB protocol.

Format
system internal protocols-settings SMB-settings view

Example
Display the current general settings for theSMB protocol:
CLI> system internal protocols-settings SMB-settings view

Output
Local Accounts Password Never Expires = No
Local Accounts Max Password Age
= 6 Weeks
Check Password Complexity
= Yes

system internal security FTP configuration disable
Disable FTP on the FluidFS cluster.

Format
system internal security FTP configuration disable

Example
Disable FTP on the FluidFS cluster:
CLI> system internal security FTP configuration disable

system internal security FTP configuration enable
Enable FTP on the FluidFS cluster.

Format
system internal security FTP configuration enable

Example
Enable FTP on the FluidFS cluster:
CLI> system internal security FTP configuration enable

CLI Commands

271

system internal security FTP configuration view
Display the FTP settings on the FluidFS cluster.

Format
system internal security FTP configuration view

Example
Display the current FTP settings on the FluidFS cluster:
CLI> system internal security FTP configuration view

Output
Enabled = Yes

system internal security management-access
management-subnet add
Add a management subnet.

Format
system internal security management-access management-subnet add  {options}

Arguments
Argument

Description

Format



Netmask or prefix of the subnet

IP address in IPv6 or IPv4 format

Option

Description

Format

-Interface 

Interface on which to define the
subnet

Possible values are Client or
Admin

-VLANTag 

VLAN ID of the subnet

Whole positive number (1 to
4094)

-PrivateIPs 

NAS controller IP addresses

Comma-separated list of IP
addresses in IPv6 or IPv4 format

-PublicIP 

Client VIP that the administrator
will use for management access

IP address in IPv6 or IPv4 format

Options

272

CLI Commands

Example
Add a management subnet on the client interface with the client VIP 10.10.10.44 and NAS controller IP
addresses 10.10.10.42 and 10.10.10.43:
CLI> system internal security management-access management-subnet add
255.255.255.0 -Interface Client -PrivateIPs 10.10.10.42,10.10.10.43 -PublicIP
10.10.10.44

system internal security management-access
management-subnet delete
Delete a management subnet.

Format
system internal security management-access management-subnet delete

Example
Delete a management subnet:
CLI> system internal security management-access management-subnet delete

system internal security management-access
management-subnet edit
Modify management subnet settings.

Format
system internal security management-access management-subnet edit {options}

Options
Option

Description

Format

-Interface 

Interface on which to define the
subnet

Possible values are Client or
Admin



Netmask or prefixof the subnet

IP address in IPv6 or IPv4 format

-VLANTag 

VLAN ID of the subnet

Whole positive number (1 to
4094)

-PrivateIPs 

NAS controller IP addresses

Comma-separated list of IP
addresses in IPv6 or IPv4 format

-PublicIP 

Client VIP that the administrator
will use for management access

IP address in IPv6 or IPv4 format

CLI Commands

273

Example
Change the client VIP of a management subnet to 10.10.10.44:
CLI> system internal security management-access management-subnet edit PublicIP 10.10.10.44

system internal security management-access
management-subnet view
Display management subnet settings.

Format
system internal security management-access management-subnet view

Example
Display the current management subnet settings:
CLI> system internal security management-access management-subnet view

Output
Interface
Network Id
Netmask
VLAN Tag
PrivateIPs
PublicIPs

=
=
=
=
=
=

Client
10.10.10.0
255.255.255.0
0
10.10.10.42,10.10.10.43
10.10.10.44

system internal security management-access restrict
Restrict management access to a dedicated subnet.

Format
system internal security management-access restrict

Example
Restrict management access to a dedicated subnet:
CLI> system internal security management-access restrict

274

CLI Commands

system internal security management-access restrictionstatus
Display the status of management access restriction.

Format
system internal security management-access restriction-status

Example
Display the current status of management access restriction:
CLI> system internal security management-access restriction-status

Output
Restriction Status = Unrestricted

system internal security management-access unrestrict
Unrestrict management access so that administrators will be able to access the system from any subnet.

Format
system internal security management-access unrestrict

Example
Unrestrict management access so that administrators will be able to access the system from any subnet:
CLI> system internal security management-access unrestrict

system internal security support-access changepassword
Change the password of the support user.

Format
system internal security support-access change-password {options}

Options
Option

Description

Format

-Password 

Password of the support user

Must include at least eight
characters, and should contain at
least three of the following
character types: lowercase

CLI Commands

275

Option

Description

Format
character, uppercase character,
digit, special characters (for
example, +, ?, and *)

Example
Change the password of the support user to Password123:
CLI> system internal security support-access change-password -Password
Password123

system internal security support-access disable
Disable support access to the system.

Format
system internal security support-access disable

Example
Disable support access to the system:
CLI> system internal security support-access disable

system internal security support-access enable
Enable support access to the system.

Format
system internal security support-access enable

Example
Enable support access to the system:
CLI> system internal security support-access enable

system internal security support-access secure-consoleaccess disable
Disable remote access to support secure console.

Format
CLI> system internal security support-access secure-console-access disable

276

CLI Commands

system internal security support-access secure-consoleaccess disable-proxy-authentication
Disable proxy-authentication.

Format
CLI> system internal security support-access secure-console-access disableproxy-authentication

system internal security support-access secure-consoleaccess enable
Enable remote access to support secure console.

Format
system internal security support-access secure-console-access enable {options}
Option

Description

ReservationServerUrl


Reservation Server URL

SessionTtl

Session time to live

EnableProxy 

Enable proxy

ProxyAddress 

Proxy address

ProxyPort 

Proxy port

ProxyType

Proxy type

Format

Specify the date in the following
format: “DD-MMM-YY
HH24:MI:ss” (double quotation
marks are required); for example:
“19-Mar-14 23:09:34”

system internal security support-access secure-consoleaccess enable-proxy-authentication
Enable proxy-authentication.

Format
system internal security support-access secure-console-access enable-proxyauthentication {options}

CLI Commands

277

Options
Option

Description

ProxyUsername


Proxy user name

Format

ProxyPassword  Proxy password

system internal security support-access secure-consoleaccess view
Supports secure shell status view.

Format
CLI> system internal security secure-console-access view

system internal security support-access view
Display settings for support access to the system.

Format
system internal security support-access view

Example
Display the current settings for support access to the system:
CLI> system internal security support-access view

Output
Enabled = Yes

system internal security support-assist disable
Disable SupportAssist.

Format
system internal security support-assist disable

Example
Disable SupportAssist:
CLI> system internal security support-assist disable

278

CLI Commands

system internal security support-assist enable
Enable SupportAssist.

Format
system internal security support-assist enable

Example
Enable SupportAssist:
CLI> system internal security support-assist enable

system internal security support-assist view
Display settings for SupportAssist.

Format
system internal security support-assist view

Example
Display the current settings for SupportAssist to the system:
CLI> system internal security support-assist view

system internal security ui-configuration edit
Modify the UI settings.

Format
system internal security ui-configuration edit {options}

Options
Option

Description

Format

-SessionExpirationPeriod


UI expiration period

Whole positive number (in
seconds)

-LoginBanner 

The sign-on banner page that
displays when you log in to Dell
Storage Manager

CLI Commands

279

Example
Change the UI session expiation period to 1800 seconds:
CLI> system internal security ui-configuration edit -SessionExpirationPeriod
1800

system internal security ui-configuration view
Display the UI settings.

Format
system internal security ui-configuration view

Example
Display the current UI session expiation period settings:
CLI> system internal security ui-configuration view

Output
Session Expiration Period (in seconds) = 1800

system internal security ui-configuration wui-settings
disable
Disable the WUI (web user interface) settings.

Format
system internal security ui-configuration wui-settings disable

system internal security ui-configuration wui-settings
enable
Enable the WUI (web user interface) settings.

Format
CLI> system internal security ui-configuration wui-settings enable

280

CLI Commands

system internal security ui-configuration wui-settings
view
Display the WUI (web user interface) settings.

Format
CLI> system internal security ui-configuration wui-settings view

system internal system-configuration-state hardwarereplacement-finished
Indicate that the hardware replacement is finished.
CAUTION: This command should be used only by Dell Technical Support. This command is used
during a FluidFS cluster deployment.

Format
system internal system-configuration-state hardware-replacement-finished

Example
After performing a hardware replacement, indicate that the hardware replacement is finished:
system internal system-configuration-state hardware-replacement-finished

system internal system-configuration-state hardwarereplacement-start
Indicate that the hardware replacement is starting.
CAUTION: This command should be used only by Dell Technical Support. This command is used
during a FluidFS cluster deployment.

Format
system internal system-configuration-state hardware-replacement-start

Example
Before performing a hardware replacement, indicate that the hardware replacement is starting:
CLI> system internal system-configuration-state hardware-replacement-start

CLI Commands

281

system internal system-configuration-state installationfinished
Indicate that the installation is finished.
CAUTION: This command should be used only by Dell Technical Support. This command is used
during a FluidFS cluster deployment.

Format
system internal system-configuration-state installation-finished

Example
After completing a FluidFS cluster installation, indicate that the installation is finished:
CLI> system internal system-configuration-state installation-finished

system internal system-configuration-state view
Display the current state of the configuration.

Format
system internal system-configuration-state view

Example
Display the current state of the configuration:
CLI> system internal system-configuration-state view

Output
Installed
= Yes
In middle of hardware replacement = No

system licenses delete
Delete the license of a feature.

Format
system licenses delete 

Arguments
Argument

Description

Format



Name of the feature

Possible values are
AdvancedDeduplication,

282

CLI Commands

Argument

Description

Format
Replication, Deduplication,
Snapshots

Example
Delete the license for the Snapshots feature:
CLI> system licenses delete Snapshots

system licenses list
Display a list of installed licenses.

Format
system licenses list

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a list of the current installed licenses:
CLI> system licenses list

Output
.---------------.----------------.-----------.------------.--------------.
| Feature
| Entitlement Id | State
| Expiration| Is Violation |
|---------------|----------------|-----------|-----------|--------------|
| Snapshots
|
| Perpetual |
| No
|
|---------------|----------------|-----------|-----------|--------------|
| Replication
|
| Perpetual |
| No
|
|---------------|----------------|-----------|-----------|--------------|
| Deduplication |
| Perpetual |
| No
|
'---------------'----------------'-----------'-----------'--------------'

system licenses load
Load a new license file.
NOTE: FTP is enabled by default on the FluidFS cluster. However, if FTP has been disabled, see
system internal security FTP configuration enable to reenable FTP before using this
command.

CLI Commands

283

Format
system licenses load 

Arguments
Argument

Description

Format



File name of the new license file

Existing file name of license file
uploaded to ftp://
@:
44421/licensing/

Example
Load a new license file named license:
CLI> system licenses load license

system licenses view
Display details about an installed license.

Format
system licenses view 

Arguments
Argument

Description

Format



Name of the feature

Possible values are
AdvancedDeduplication,
Replication, Deduplication,
Snapshots

Example
Display details about the Snapshots license feature:
CLI> system licenses view Snapshots

Output
Feature
Entitlement Id
State
Expiration
Is Violation

284

= Snapshots
=
= Perpetual
=
= No

CLI Commands

system mail-configuration disable-authentication
Disable mail relays authentication.

Format
system mail-configuration disable-authentication

Example
Disable mail relays authentication:
CLI> system mail-configuration disable-authentication

system mail-configuration enable-authentication
Enable mail relays authentication.

Format
system mail-configuration enable-authentication  {options}

Arguments
Argument

Description

Format



Mail relays user name

Existing mail relay user name

Option

Description

Format

-MailRelayPassword


Mail relays password

Existing mail relay password

Options

Example
Enable mail relays authentication where the mail relay user name is admin and the password is
Password123:
CLI> system mail-configuration enable-authentication admin -MailRelayPassword
Password123

system mail-configuration set
Modify mail settings.

Format
system mail-configuration set {options}

CLI Commands

285

Options
Option

Description

Format

-MailRelays 

Mail relays

Comma-separated list of IP
addresses in IPv6 or IPv4 format

-ClusterMailAddress


Mail address from which the
FluidFS cluster will send the
emails

Email address in the following
format: xxx@xxx.xxx

-MaximumMailSize


Maximum single email size

Whole positive number (in MB)

-MaximumMailFrequency


Maximum frequency in which the Possible values are
FluidFS cluster will send emails
Onceevery10minutes,
Onceeveryhour,
Onceevery30minutes

Example
Add a mail relay with the IP address 172.22.69.1, set the mail address to cluster1@dell.com, and set the
maximum email size to 50 MB:
CLI> system mail-configuration set -MailRelays 172.22.69.1 -ClusterMailAddress
cluster1@dell.com -MaximumMailSize 50

system mail-configuration view
Display mail settings.

Format
system mail-configuration view

Example
Display the current mail settings:
CLI> system mail-configuration view

Output
Mail Relay Use Authentication
Mail Relay User Name
MailRelays
Cluster Mail Address
Maximum Mail Size
Maximum Mail Frequency

286

=
=
=
=
=
=

Yes
admin
172.22.69.1
cluster1@dell.com
50.00 MB
Once every 10 minutes

CLI Commands

system SNMP set
Modify SNMP settings.

Format
system SNMP set {options}

Options
Option

Description

Format

-Location 

Location of the FluidFS cluster as
it will appear in the SNMP traps
that will be sent from the FluidFS
cluster

Any string

-Contact 

Contact details of the FluidFS
Any string
cluster as they will appear in the
SNMP traps that will be sent from
the FluidFS cluster

-ReadOnlyCommunity


SNMP read community

Length must be less than 30
characters

-TrapRecipients


SNMP trap recipients

Comma-separated list of host
names. Host names must contain
one or more sub names, each
separated by a dot. Each sub
name can contain letters,
number,s or hyphens, but cannot
start or end in a hyphen.

Example
Set the SNMP location to US, the FluidFS cluster contact details to idffs1, and trap recipient to
mgmtstation.nas.test:
CLI> system SNMP set -Location US -Contact idffs1 -TrapRecipients
mgmtstation.nas.test

system SNMP update-filter
Modify the SNMP filter settings.

Format
system SNMP update-filter  {options}

CLI Commands

287

Arguments
Argument

Description

Format



Workspace to which the events
belong

Possible values are
AccessControl, Hardware,
NasVolumes,
Performance&Connectivity,
System

Option

Description

Format

-Enabled 

Indicate whether SNMP traps
should be sent for the events
from this workspace

Possible values are Yes, No

-Severity 

Severity of the events that will be
sent as SNMP traps from this
workspace

Possible values are All, Major

Options

Example
Enable SNMP traps for all events from the Hardware workspace:
CLI> system SNMP update-filter Hardware -Enabled Yes -Severity Major

system SNMP view
Display SNMP settings.

Format
system SNMP view

Example
Display the current SNMP settings:
CLI> system SNMP view

Output
Location
Contact
Read Only Community
TrapRecipients
Filters

288

=
=
=
=
=

US
idffs1
public
mgmtstation.nas.test
.----------------------------.---------.----------.
| Workspace
|Enabled | Severity |
|----------------------------|--------|----------|
| NasVolumes
|Yes
| Major
|
|----------------------------|--------|----------|
| AccessControl
|Yes
| Major
|

CLI Commands

|----------------------------|--------|----------|
| Performance & Connectivity| Yes
| Major
|
|----------------------------|--------|----------|
| Hardware
|Yes
| Major
|
|----------------------------|--------|----------|
| System
|Yes
| Major
|
'----------------------------'---------'----------'

system software-updates list
Display a list of the software updates.

Format
system software-updates list

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a list of the current software updates:
CLI> system software-updates list

Output
.----------.---------------.--------------------.----------------------------.
| Release | Status
| Installation Date | FileName
|
|----------|---------------|--------------------|----------------------------|
| 3.0.8331 | Not installed |
| DellFluidFS-3.0.8331-SP.sh |
|----------|---------------|--------------------|----------------------------|
| 3.0.8290 | Installed
| 29-Jul-13 10:14:41 |
|
'----------'---------------'--------------------'----------------------------'

system software-updates view
Display the software update details.

Format
system software-updates view 

Arguments
Argument

Description

Format



Software update version

Existing release name

CLI Commands

289

Example
Display the software update details for release 3.0.8142:
CLI> system software-updates view 3.0.8142

Output
Release
= 3.0.8142
Status
= Installed
Installation Date = 12-Jul-13 13:19:36
File Name
=

system software-updates approve-eula
Approve that the administrator read the end-user license agreement.

Format
system software-updates approve-eula

Arguments
Argument

Description



Name of the person approving
the EULA



Title of the person approving the
EULA

Format

Example
Bob Smith approves that the administrator read the EULA:
CLI> system software-updates approve-eula -ApproverName 

system software-updates current-version
Display the current version of the software.

Format
system software-updates current-version

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

290

CLI Commands

Example
Display the current version of the software:
CLI> system software-updates current-version

Output
Release 3.0.8331

system software-updates flash-standby-controller
Write the service pack image to the internal USB drive of the node.

Format
flash-standby-controller 

Arguments
Argument

Description



File name of the software update

Format

system software-updates upgrade
Install a service pack.
NOTE: FTP is enabled by default on the FluidFS cluster. However, if FTP has been disabled, see
system internal security FTP configuration enable to reenable FTP before using this
command.

Format
system software-updates upgrade 

Arguments
Argument

Description

Format



File name of the software update

Existing file name of software
update file uploaded to ftp://
@:
44421/servicepack/

Example
Install a service pack named DellFS-3.0.7640-SP.sh:
CLI> system software-updates upgrade DellFS-3.0.7640-SP.sh

CLI Commands

291

Output
Confirmation: System upgrade is a lengthy operation.
It is recommended to upgrade during a maintenance window as users
will experience disconnections. Are you sure you want to perform
the upgrade now?
Are you sure that you want to complete the operation?
( Yes / No ):

system software-updates validate
Validate a service pack.
NOTE: FTP is enabled by default on the FluidFS cluster. However, if FTP has been disabled, see
system internal security FTP configuration enable to re-enable FTP before using this command.

Format
system software-updates validate 

Arguments
Argument

Description

Format



File name of the software update

Existing file name of software
update file uploaded to ftp://
@:
44421/servicepack/

Example
Validate a service pack named DellFS-3.0.7640-SP.sh:
CLI> system software-updates validate DellFS-3.0.7640-SP.sh

Output
Release = 3.0.7640
Status = Valid

system software-updates view-available
Display the available software update details.

Format
system software-updates view-available 

292

CLI Commands

Arguments
Argument

Description

Format



Software update version

Existing release name

Example
Display the software update details for release 3.0.8142:
CLI> system software-updates view 3.0.8142

Output
Release
= 3.0.8142
Status
= Installed
Installation Date = 12-Jul-13 13:19:36
File Name
=

system time available-timezones
Display a list of available time zones.

Format
system time available-timezones

Example
View available time zones:
CLI> system time available-timezones

Output
.----------------------------------.
| Time Zone
|
|----------------------------------|
| Africa/Abidjan
|
|----------------------------------|
| Africa/Accra
|
|----------------------------------|
| Africa/Addis_Ababa
|
|----------------------------------|
| Africa/Algiers
|
|----------------------------------|
| Africa/Asmara
|
|----------------------------------|
| Africa/Asmera
|
|----------------------------------|
| Africa/Bamako
|
|----------------------------------|
| Africa/Bangui
|
|----------------------------------|
| Africa/Banjul
|
|----------------------------------|

CLI Commands

293

| Africa/Bissau
|
|----------------------------------|
| Africa/Blantyre
|
|----------------------------------|
| Africa/Brazzaville
|
|----------------------------------|
...[snip]...

system time edit
Modify the time zone and NTP settings.

Format
system time edit {options}

Options
Option

Description

Format

- TimeZone 

Time zone of the FluidFS cluster

For a list of valid time zones, see
system time available-timezones.

-UseNTP 

Indicate whether NTP servers
should be used

Possible values are Yes, No

-NTPServers 

NTP servers

Comma-separated list of host
names or IP addresses. An IP
address must be in the format
x.x.x.x. A host name must contain
one or more sub names, each
separated by a dot. Each sub
name can contain letters,
numbers, or hyphens, but cannot
start or end in a hyphen.

Example
Set the current time zone to US/Central and specify the NTP server time.lab.town:
CLI> system time edit -TimeZone US/Central -UseNTP Yes -NTPServers time.lab.town

system time view
Display the time zone and NTP settings.

Format
system time view

294

CLI Commands

Example
Display the current time zone and NTP settings:
CLI> system time view

Output
Time Zone = US/Central
Use NTP
= Yes
NTPServers = time.lab.town

system time set-current-time
Modify the current FluidFS cluster time.

Format
system time set-current-time 

Arguments
Argument

Description

Format



Current time

"DD-MMM-YY HH:MI:SS" (double
quotation marks are required)

Example
Modify the current FluidFS cluster time to 05-Aug-13 11:24:15:
CLI> system time set-current-time "05-Aug-13 11:24:15"

system time view-current-time
Display the current time on the FluidFS cluster.

Format
system time view-current-time

Example
Display the current time on the cluster:
CLI> system time view-current-time

Output
Current Time = 05-Aug-13 11:42:01

CLI Commands

295

system vmware compute-resources list
Display a list of all ESXi hosts and clusters mounting this FluidFS system.

Format
system vmware compute-resourcees list

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a list of current VMware servers:
CLI> system vmware vmware-servers list

system vmware compute-resources view
Display details of compute resources.

Format
system vmware compute-resources view

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a list of current VMware servers:
CLI> system vmware vmware-servers list

296

CLI Commands

system vmware virtual-machines clone
Clone a virtual machine using FluidFS file cloning.

Format
system vmware virtual-machines clone  
  [options]

Arguments
Argument

Description



Unique name of the VMware
server



Host name to register cloned
virtual machines



Prefix for names of cloned virtual
machines. The machines will be
named {CloneNamePrefix}1,
{CloneNamePrefix}2, and so on.

Format

Options
Option

Description

SourceVMPath 

Full path of source virtual
machine in VMware server
inventory

SourceVMName

Source virtual machine name for
cloning

NumberOfClones


Number of cloned virtual
machines to create

Format

PowerOnClones
machines after creation
ApplyCustomizationSpecOnClon Apply existing customization
es
specification on resulting cloned

CustomizationSpecName


Name of the customized
specification to apply on
resulting cloned virtual machines

UserName 

VMware server user name; this
field is required if VMware server
credentials were not saved

CLI Commands

297

Option

Description

Password 

VMware server password; this
field is required if VMware server
credentials were not saved

Format

Example
Clone a virtual machine with a server named MyMachine:
CLI>system vmware virtual-machines -clone MyMachine 192.168.0.14 
[options]

system vmware virtual-machines clone-single
Create a single cloned virtual machine using FluidFS file cloning.

Format
system vmware virtual-machines clone-single  
   [options]

Arguments
Argument

Description

VMwareServerName

Unique name of the VMware
server

SourceVMPath

Full path of source virtual
machine in VMware server
inventory

SourceVMName

Souce virtual machine name for
cloning

DestinationHost


Host name to register cloned
virtual machines

CloneName 

Name of cloned virtual machines.
The machines will be named
{CloneNamePrefix}1,
{CloneNamePrefix}2, and so on.

Format

Options
Option

Description

PowerOnClones


Power on cloned virtual
machines after creation

Format

ApplyCustomizationSpecOnClon Apply existing customization
es
specification on resulting cloned


298

CLI Commands

Option

Description

CustomizationSpecName


Name of the customized
specification to apply on
resulting cloned virtual machines

UserName 

VMware server user name; this
field is required if VMware server
credentials were not saved

Password

VMware server password; this
field is requuired if VMware server
credentials were not saved

Format

Example
Create a single cloned virtual machine with a server named MyMachine:
CLI>system vmware virtual-machines -clone-single MyMachine 192.168.0.14
 [options]

system vmware virtual-machines list
Display a list of the virtual machines located on the FluidFS system.

Format
system vmware virtual-machines list [options]

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

-FilterByName 

Filter virtual machines by name

Example
Display a list of current virtual machines:
CLI> system vmware virtual-machines list

system vmware virtual- machines view
Display details of the virtual machines located on the FluidFS system.

Format
system vmware virtual-machines view  


CLI Commands

299

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

-VMwareServerName


VMware server containing the
virtual machine

-Path 

Virtual machine full path in
VMWare server inventory

-VirtualMachineName


Virtual machine name

Example
Display details about a virtual machine:
CLI> system vmware virtual-machines view MyVM

system vmware vmware-servers delete
Delete one or more VMware servers.

Format
system vmware vmware-servers delete [option]

Option
Option

Description

-VMwareServerName


Unique name of the server

Format

Example
Delete a VMware server:
CLI> system vmware vmware-servers delete MYServer

system vmware vmware-servers edit
Modify the VMware server.
The server can be either a vCenter server or a standalone ESXi host.

Format
system vmware vmware-servers edit  

300

CLI Commands

Arguments
Argument

Description



Unique name of the VMware
server



Address of the VMware server

Format

Can be a host name or IP address

Example
Modify a VMware server:
CLI>system vmware vmware-servers edit MYVMware 192.168.0.14

system vmware vmware-servers list
Display a list of the VMware servers.

Format
system vmware vmware-servers list [option]

Option
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

Example
Display a list the current VMware servers:
CLI> system vmware vmware-servers list

system vmware vmware-servers view
Display details about the VMware servers.

Format
system vmware vmware-servers view [options]

CLI Commands

301

Options
Option

Description

Format

--CSV

Displays the command output in
a comma-delimited format with
a header

Append --CSV to the command

--VMwareServerName


Name of the server as it was
defined during the add
command.

Example
Display details about a VMware server:
CLI> system vmware vmware-servers view Server1

302

CLI Commands

CLI Procedures

3

Adding a NAS Appliance to a FluidFS Cluster Using the CLI
Use this procedure to add a NAS appliance to a FluidFS cluster using the CLI. The recommended way to
add a NAS appliance is to use the FluidFS NAS Manager WebUI. This procedure should be performed only
by Dell Technical Support Services.
1.

Log on to the CLI of the existing FluidFS cluster (do not log on to the new NAS appliance) as
described on Accessing the CLI.

2.

Determine the network ID of the existing client subnets for use in Step 3.
networking subnets list

3.

Configure the client VIPs (PrivateIPs) and an IP address for each NAS controller that you are adding
(PublicIPs). Dell recommends adding at least one client VIP per NAS controller.
networking subnets edit   -PrivateIPs 
PublicIPs 
For example:
networking subnets edit 192.10.0.0 255.255.0.0 -PrivateIPs
192.10.18.38,192.10.18.39,192.10.18.40,192.10.18.41 -PublicIPs
192.10.18.42,192.10.18.43

4.

Repeat Step 3 for additional client subnets.
For example:
networking subnets edit 10.10.76.0 255.255.252.0 -PrivateIPs
10.10.78.121,10.10.78.122,10.10.78.123,10.10.78.124 -PublicIPs
10.10.78.125,10.10.78.126

5.

(iSCSI only) Configure additional IP addresses for the iSCSI SAN subnets.
hardware fabrics iscsi edit  -ControllersIPs 
For example:
hardware fabrics iscsi edit SANb -ControllersIPs
192.11.18.14,192.11.18.15,192.11.18.16,192.11.18.17
hardware fabrics iscsi edit SAN -ControllersIps
192.11.18.10,192.11.18.11,192.11.18.12,192.11.18.13

6.

Add the NAS appliance.
hardware nas-appliances add-appliance 
For example:
hardware nas-appliances add-appliance L846185

7.

For iSCSI, the IQNs will have FluidFS NasControllerX in the name.

8.

In the output of the following command, make sure Luns Accessibility shows Optimal from all NAS
controllers to all NAS volumes.
hardware storage-subsystem view

CLI Procedures

303

9.

Perform an incremental format and join the new NAS appliance to the FluidFS cluster.
hardware nas-appliances join-appliance 
For example:
hardware nas-appliances join-appliance 2

10. After the previous command completes, confirm that the NAS appliance Status is Optimal in the
output of the following command.
hardware nas-appliances status-list

304

CLI Procedures

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Count                      : 304
Page Mode                       : UseOutlines
Tagged PDF                      : Yes
Language                        : EN
Title                           : Dell FluidFS 5.0 FS8600 Appliance  CLI Reference Guide
Author                          : Dell Inc.
Keywords                        : Servers, Storage, & Networking#Compellent#dell compellent fs8600#dell-compellent-fs8600#Reference Guide#manual# guide# documentation
Creator                         : AH XSL Formatter V6.1 MR6 for Windows (x64) : 6.1.11.18624 (2014/10/01 14:58JST)
Producer                        : Antenna House PDF Output Library 6.1.610 (Windows (x64)); modified using iTextSharp 5.1.3 (c) 1T3XT BVBA
Create Date                     : 2016:07:27 08:30:13-08:00
Modify Date                     : 2016:08:04 00:02:54-05:00
Trapped                         : False
Subject                         : Reference Guide
Productcode                     : dell-compellent-fs8600
Typecode                        : rg
Typedescription                 : Reference Guide
Languagecodes                   : en-us
Sectioncode                     : swd
Sectiondescription              : Software Documents
Publishdate                     : 2016-08-04 00:00:00
Expirydate                      : 9999-09-09 00:00:00
Manualurl                       : http://downloads.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_compellent/dell-compellent-fs8600_Reference%20Guide_en-us.pdf
Readytocopy                     : false
Isdeleted                       : False
Businesskeywords                : manual# guide# documentation
Futureproductindication         : No
Categorypathforfutureproducts   : 
Filesize                        : 4578
Isrestricted                    : False
Productpath                     : esuprt_compellent
Creationdate                    : D:20160727083013-08'00'
Moddate                         : D:20160803094932-05'00'

EXIF Metadata provided by EXIF.tools

Dell Compellent Fs8600 FluidFS 5.0 Appliance CLI Reference Guide User Manual Fluid FS En Us

Navigation menu

Versions of this User Manual:

Views

Navigation