Dell Compellent Fs8600 FluidFS Version 6.0 Appliance Deployment Guide User Manual Fluid FS Guide2 En Us

• Dell FluidFS Version 6.0 FS8600 Appliance Deployment Guide
• About This Guide
  • Revision History
  • Audience
  • Related Publications
    • Documents Intended for Dell Customers
    • Documents Intended for Dell Installers and Certified Business Partners
• Introduction
  • FS8600 Appliance Overview
    • Internal Storage
    • Internal Cache
  • FluidFS Architecture Overview
    • Storage Center
    • Internal Backup Power Supply
    • SAN Network
    • LAN/Client Network
• Deployment Prerequisites
  • Rack and Infrastructure
  • Materials
  • Network Credentials
  • SAN and Internal Network for Fibre Channel Appliances
    • Fibre Channel SAN Fabric
    • Internal Network for Multi-Appliance Clusters
  • SAN and Internal Networks for iSCSI Appliances
  • Client Network
  • IP Addresses and Network Infrastructure
  • Network Ports
  • SAN Configuration
• Install and Connect the FS8600 Hardware
  • Install the FS8600 Hardware
  • Configure Network Connections for FC Appliances (1GbE)
    • Connect FC Appliances (1GbE)
    • Example of Single-Appliance FC 1GbE Cluster Configuration
    • Example of Multi-Appliance FC 1GbE Cluster Configuration
  • Configure Network Connections for FC Appliances (10GbE)
    • Connect FC FS8600 Appliances (10GbE)
    • Example of Single-Appliance FC 10GbE Cluster Configuration
    • Example of Multi-Appliance FC 10GbE Cluster Configuration
  • Configure Network Connections for 10GbE iSCSI Appliances
    • Connect 10GbE FS8600 iSCSI Appliances
    • Example of 10GbE iSCSI Cluster Configuration
• Configure the FluidFS Cluster
  • Configure FluidFS Cluster Network Settings
    • Connect to the FluidFS Cluster CLI
    • Configure Cluster IP Addresses and the Default Gateway
    • Use Dell Storage Manager to Configure the FluidFS Cluster
  • Remove a FluidFS Cluster From Dell Storage Manager
• Perform Post-Setup Tasks
  • Add DNS Records for the FluidFS Cluster
  • Enabling Secured Management
    • Add a Secured Management Subnet
    • Enable or Disable Secured Management
  • Verify That Dell Storage Manager Is Receiving FluidFS Events
  • Next Steps
• Upgrade an Appliance to the Latest FluidFS 6.0 Version
  • Upgrade Prerequisites
  • Upgrade Standby Controllers to the Latest Version of FluidFS v6.0
• iSCSI Switch Configuration Examples
  • Dell PowerConnect iSCSI Switch Configuration
  • Dell Force10 S5000 iSCSI Switch Configuration