Dell Storage Sc460 Expansion Enclosure Owner's Manual User En Us

• Dell SC460 Expansion Enclosure Owner's Manual
• About this Guide
  • Revision History
  • Audience
  • Contacting Dell
  • Related Publications
• About the SC460 Expansion Enclosure
  • SC460 Expansion Enclosure Overview
  • SC460 Expansion Enclosure Front-Panel Features and Indicators
  • SC460 Expansion Enclosure Back Panel Features and Indicators
  • SC460 Expansion Enclosure Drives
  • SC460 Expansion Enclosure Drive Numbering
• SC460 Expansion Enclosure Installation
  • Safety Precautions
    • Installation Safety Precautions
    • Electrical Safety Precautions
    • Electrostatic Discharge Precautions
    • General Safety Precautions
  • Unpacking Storage Center Equipment
  • Determine the Mounting Location
  • Install the Cable Management Tray
  • Modify the Rail Lengths
  • Install the Expansion Enclosure
  • Install the Cable Management Arms
  • Installing the Expansion Enclosure in a Non-Standard Rack
    • Install the Rails in a Nonstandard Rack
    • Secure the Expansion Enclosure Chassis and Top Cover in a Nonstandard Rack
  • Connect the Power Cables
  • Install the Front Bezel
• Replacing SC460 Expansion Enclosure Components
  • Safety Precautions
    • Installation Safety Precautions
  • Bezel
    • Remove the Front Bezel
    • Install the Front Bezel
  • Pre-Replacement Procedures
    • Send Diagnostic Data Using Dell SupportAssist
    • Change the Operation Mode of the Storage Center to Maintenance
    • Shut Down the Storage System and Expansion Enclosures
  • Hard Drives
    • Identifying the Failed Hard Drive
    • Remove a Hard Drive
    • Install a Hard Drive
  • Cooling Fan Modules
    • Identifying the Failed Cooling Fan Module
    • Remove a Cooling Fan Module
    • Install a Cooling Fan Module
  • Enclosure Management Module
    • Identifying the Failed Enclosure Management Module
    • Remove an Enclosure Management Module
    • Install an Enclosure Management Module
  • Power Supply Units
    • Identifying the Failed PSU
    • Remove a PSU
    • Install a PSU
  • 1U Cable Management Tray
    • Remove the Cable Management Tray
    • Install the Cable Management Tray
  • Cable Management Arms
    • Remove the Cable Management Arms
    • Install the Cable Management Arms
  • Expansion Enclosure Rack Rails
    • Remove the Expansion Enclosure Rails
    • Install the Expansion Enclosure Rails
  • Post-Replacement Procedures
    • Start Up the Storage System and Expansion Enclosure
    • Send Diagnostic Data Using Dell SupportAssist
    • Change the Operation Mode of the Storage Center to Normal
• SC460 Expansion Enclosure Technical Specifications
  • Technical Specifications