User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3247127 |
| Application ID | 6DKsItAk4U+P8VUzv2bcPQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 18.32kB (228992 bits) |
| Date Submitted | 2017-01-04 00:00:00 |
| Date Available | 2017-01-04 00:00:00 |
| Creation Date | 2016-12-27 14:32:04 |
| Producing Software | Acrobat Distiller 11.0 (Windows) |
| Document Lastmod | 2016-12-27 14:32:04 |
| Document Title | Microsoft Word - BTR-001_ä¸è‹±æ–‡è¯´æ˜Žä¹¦..doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Administrator |
R1 User Manual Please read below content carefully before using Thanks for purchasing R1, may you will enjoy it. Please read the “Safety Instructions” before using the product for your safety and correct use. Caution Do not immerse in water to avoid damaging the product as well as shortening its lifetime. DO NOT drop or apply shock to the product. Such act may cause irreparable damage to the product. DO NOT expose the product to open flame or under the direct sunlight for a prolonged period of the time. Such environment may cause malfunction or fire. Please do not change the setting or talk on the cell phone while driving. It may cause an accident. Please note: in no event our product shall be liable for any special, indirect, punitive, incidental, exemplary or consequential damages, or any damages whatsoever resulting from the usage of this product. Conversation on the cell phone when driving is extremely dangerous. Please go out of the road for doing the telephone call. If anything unusual such as smoke, heat or bad smell is detected, please disconnect immediately the power and stop the usage. Continuing the use may cause electric shock or fire. DO NOT lick, bite or put the product into the mouth. Such act may result in serious injuries/accidents. Take utmost caution around children. DO NOT change the mic when it gets wet. With water exposure, it may cause fire, electrification or failure. Temperature range of use: ‐15℃‐50℃ Please use only qualified accessories which have been authenticated by us, in order to guarantee the product correct functioning. Note on battery charge For battery charge, use USB terminal or USB adaptor at normal temperature. Use regulation USB terminal only. Otherwise it may cause smoke generation or fire. When charging the battery, if any strange odor or high heat should broken out, please immediately pull the plug from the body. It may cause smoke generation or fire. Do not leave the product in a state of charge long after the charging is completed. Such condition may cause smoking/ignition. Charge battery at least once every six months even if the product is not use for an extended period of time. Over discharge may require battery replacement. Product description: Function: ‐PTT function Operation Power on In power off state, press PTT button and hold it for about 3 seconds, release the button, blue indicator will flash slowly to indicate power on successfully. Power off There are two methods for power off operation. 1. The remote controller will automatically power off after mobile phone 5mins Bluetooth disconnect later. 2. Use the USB charging cable connect with power, charging the R1 power will off. Pairing with mobile phone ① Place the R1 and the mobile phone in a visible area within 1 meter range. ② Make sure the Bluetooth remote controller is in power off state. ③ Press and hold PTT Button for about 8 seconds, when the Blue LED and the Red LED flashing alternately, release the button then the R1 is in pairing state. ④ Follow the user manual of your mobile phone, turn on the Bluetooth function, and searching the PTT R1 devices ⑤ From the found devices in your mobile phone, select the device named “R1” and then try to pair with it, when it prompts to enter password, enter pin code <0000>. Once paired successful, LED Indicator will change from Blue/Red alternately to Blue flashing, to note that the Bluetooth remote controller has connected with your mobile phone. Now you can use the remote controller to push to talk or answer you phone call. Note: 1. Password code may be not necessary for some mobile phones. 2. The pairing will be remembered after the first pair, so when you second or next time use the device, do not need to pair again. Push To Talk Function For Poc App ①After connected to your cell phone Poc(Ptt Over Cellphone) app, just push the PTT button to remote control the PTT function. Some Poc app may need some setting change to Bluetooth before use. Details please refer to the user guide of Poc App. Note: Poc means PTT Over Cell Phone. Technical Specification: Bluetooth remote control Specifications Bluetooth Chip: BC4_08 Bluetooth Version: Bluetooth 2.1 Supported Bluetooth Profiles: SPP Bluetooth RF Spec: Class 2 RF Power: 1.47 dBm RF Sensitivity: -75db RF Frequecy: 2.402GHZ-2.480GHZ Operation Range With DellKing Dongle: 5 Meters Battery Capacity:200mA Charging Time:3 Hours Working Time:60H Stand by Time:80H Appearance Colour: Black Operating temperature: -15℃ ~50 ℃ Storage Temperature: -25℃ ~60℃ About Led Indicatoer and Charging LED indicator flash mode LED indicator flashes blue every 6s LED indicator flashes red/blue alternately and quickly LED indicator flashes red twice every 1 min LED indicator flashes red every 1s LED indicator keeps red Press PTT button with blue Press PTT button with red State of indication Working/Standby mode Pairing mode Battery low Charging Charging completed Connect with phone, PTT function normal Connect with phone, PTT function normal, power low FAQ : 1,Can not power on It might low battery, please try again after charging for 3 hours, then power on again. 2,No sound Please check if the speaker mic have connected to the device or the volume too low? 3,Disconnect with mobile phone, Bt Adapter/dongle, or GPS Make sure if it is low battery, if not, the distance between the speaker mic and mobile phone within 10m? Or between them exist obstacles that absorb frequency signals like metals or water? 4,Fail to re‐connect or automatically re‐connect with mobile phone First make sure your Bluetooth function in in your mobile phone have been turned on, then remove all the paired Bluetooth device in you cell phone. Then turn off your mobile phone, restart mobile phone and pair with Bluetooth speaker‐mic and set the R1 read as “default/trust/test/permit automatically connection/always visible/allow to be found” device, and further ensure that the phone prompt tone is not vibrating mode (because the vibrating impulse wave would interfere with Bluetooth frequency signal sometimes), then repair and connect with your mobile phone. For android system, please make sure in the Bluetooth device option list, you have “Phone” options selected. 5,System halted Use USB cable to charge the remote controller once then the remote controller will reset itself.. 6,Abnormal instruction of Charging indicator 1）When the remote controller haven’t been used for long time or overused, it need to be pre‐charge for an hour, then pull out and in the charger, it will indicate normal charging. Please don’t count the pre‐charging time into normal charging time. 2）Try another charging cable or charger. 7,Crackle sound Put Q0 R1 nearer (less than 10 meter range) to your cell phone. Put Q0 and cellphone in a least obstacle blocking range. 8, Please send back your R1 set to our after‐sales service department for help if above 1 to 7 suggestions fail to solve your problem. FCC Part 15.19 Warning Statement THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC Part 15.21 Warning Statement NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. FCC Part 15.105 Warning Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Administrator Create Date : 2016:12:27 14:32:04+08:00 Modify Date : 2016:12:27 14:32:04+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 11.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - BTR-001_中英文说明书..doc Creator : Administrator Document ID : uuid:77112fb7-f1e5-453e-a85d-07def69abc58 Instance ID : uuid:faaa7ebf-4faf-4ae9-ae08-f87fe4bc0a57 Page Count : 6EXIF Metadata provided by EXIF.tools