Delta Electronics orporated DFBM-CE321 Bluetooth Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	694446
Application ID	+LTEXHAnJjUNs1DZbyErMQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.12kB (151441 bits)
Date Submitted	2006-08-16 00:00:00
Date Available	2006-08-16 00:00:00
Creation Date	2005-04-13 17:25:24
Producing Software	pdfFactory 2.25 (Windows 2000 Chinese)
Document Lastmod	2006-08-15 10:41:39
Document Title	Quick installation Guide_Bluetooth USB Dongle_BD210_V.050
Document Creator	pdfFactory www.pdffactory.com
Document Author:	IRENE.01.CHENG

Bluetooth Module
Quick Installation Guide
FCC Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter. Notice: Any changes or modification not expressly
approved by the party responsible could void the user’s authority to operate the device.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Product Introduction
The Bluetooth Module allows a computer with a USB port to communicate with other
Bluetooth-enabled devices. When used with the Bluetooth application software, it can
perform wireless network applications such as information exchange, file transfer, network
access, dial-up networking, headset, audio gateway, printer application, and so on.
Package Contents
- Installation CD ROM
- Bluetooth Module interface USB
- Quick Installation Guide
System Requirements
- IBM compatible PC with Pentium, Celeron™ processor or equivalent CPU or higher.
- RAM 64M or above
- Screen: 800*600 or above
- Display: adapter True Color 16bits or above.
- Microsoft® Windows® 98SE/ME/2000/XP
Installation Steps
Step 1: Uninstall previous version of BlueSoleil, IVT BSS or MiniBluelet. If a previous
version of BlueSoleil, IVT BSS or MiniBluelet has been ins talled, it is
recommended to uninstall it first and restart the computer before installation. You
c a n use unins ta ll tools unins t a ll .e x e ” in t he ins ta lla tion pa ck a ge .
PDF created with pdfFactory trial version www.pdffactory.com
U-TEL v. 050401
Step 2: Insert the Installation software CD into the CD-ROM of your machine.
Step 3: Launch the Setup.exe program in the installation CD ROM. In normal cases, you can
follow the instructions to finish the software installation.
Step 4: Restart the Computer. After the BlueSoleil software package is installed, you will
need to restart the computer. This is to make sure that the installed Bluetooth
Device takes effect.
Step 5: After you reboot your desktop or laptop, you can find that the BlueSoleil shortcut
icon.
is displayed on your Windows desktop.
PDF created with pdfFactory trial version www.pdffactory.com
U-TEL v. 050401
Note:
1. For Windows 98 and Windows ME, the Dial-up Adapter and Windows’s component direct
cable connection and NETBEUI protocol needs to be installed to run the Dial-up Networking
profile and LAN access profile.
2. You need configure Bluetooth Network Adapter IP to run PAN profile.
3. More details on how to use IVT BlueSoleil, please refer to Online Help, User Manual and
any other support document.
4. If some system exceptions occur during the installation, please use uninstall.exe in the
installation package to remove the remains of BlueSoleil before installing again.
Notice On Windows 98SE/ME
Expected Outcome
1. Installed Files & Directories (by default):
- \IVT Corporation\BlueSoleil
BlueSoleil execution and support files.
- \My Documents\Bluetooth
Support directory. This is the directory for Object Push and Synchronization.
Received cards and other objects will be put here.
2. Installed Devices:
- 6 Bluelet virtual COM ports
- 3 Bluelet virtual Modem
- BT Network Adapter
- HID device
Notice On Windows 2000/XP
Expected Outcome:
1. Installed Files & Directories (by default):
- \IVT Corporation\BlueSoleil
BlueSoleil execution and support files.
- \My Documents\Bluetooth
Support directory. This is the directory for Object Push and Synchronization.
Received cards and other objects will be put here.
2. Installed Devices:
- 11 Bluelet virtual COM ports
- 1 Vcomm Manager
- 3 Bluelet virtual Modem
- 1 BT Network Adapter
- 1 Bluetooth HID Enum Device
- 1 HID Device Manager
PDF created with pdfFactory trial version www.pdffactory.com
U-TEL v. 050401
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy. If not installed and used in accordance with the instructions, it may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by tuning the equipment off and on, the user is
encouraged to try and correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
TO OEM installer:
1. FCC ID label on the final system must be labeled with "Contains FCC ID:
H79DFBM-CE321" or "Contains transmitter module FCC ID:H79DFBM-CE321".
2. In the user manual, final system integrator must be ensure that there is no
instruction provided in the user manual to install or remove the transmitter
module.
3. Transmitter module must be installed and used in strict accordance with the
manufacturer's instructions as described in the user documentation that comes
with the product. This device complies with the following radio frequency and
safety standards.
The user manual of the final host system must contain the following statements:
USA-Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy. If not installed and used in accordance with the instructions, it may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by tuning the equipment off and on, the user is
encouraged to try and correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user¡¦s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Caution: Exposure to Radio Frequency Radiation.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2005:04:13 17:25:24Z
Modify Date                     : 2006:08:15 10:41:39-07:00
Producer                        : pdfFactory 2.25 (Windows 2000 Chinese)
Creation Date                   : 2005:04:13 17:25:24Z
Mod Date                        : 2006:08:15 10:41:39-07:00
Author                          : IRENE.01.CHENG
Creator Tool                    : pdfFactory www.pdffactory.com
Metadata Date                   : 2006:08:15 10:41:39-07:00
Document ID                     : uuid:cf845667-3e31-42f6-b449-5a325ef80fc3
Instance ID                     : uuid:ba574979-ce54-4b23-b714-807e475eb2e3
Format                          : application/pdf
Creator                         : IRENE.01.CHENG
Title                           : Quick installation Guide_Bluetooth USB Dongle_BD210_V.050
Page Count                      : 6

EXIF Metadata provided by EXIF.tools