Delta Electronics E804WAG Dual-Band Wireless A+G Router User Manual P74743 F6D3230 4 AG man 12 04 indd

Download:
Mirror Download [FCC.gov]
Document ID	501621
Application ID	cq4hHoL6i03xPPI/8jLeIw==
Document Description	Users manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	242.66kB (3033261 bits)
Date Submitted	2004-12-28 00:00:00
Date Available	2004-12-28 00:00:00
Creation Date	2004-12-28 15:50:36
Producing Software	Adobe PDF Library 6.0
Document Lastmod	2004-12-28 15:51:09
Document Title	P74743_F6D3230-4_AG_man_12-04.indd
Document Creator	Adobe InDesign CS (3.0.1)

Connecting and Configuring the Router
3.5 When the Internet connection
Begin surfing!
Congratulations! You have finished
installing your new Belkin Router.
To test your Internet connection,
open your browser and visit any
website, such as www.belkin.com.
Upon connecting to the Internet
through your new Router for the
first time, a reminder screen for
our included Parental Control
Web Content Filter will appear. It
will reappear every six hours until
you click one of the choices (see
image below). Please refer to your
“Parental Control Web Content
Filter” User Manual for detailed
information.
19
section
is complete, the Wizard will tell
you that you are finished. The
“Connected” LED on the front of
the Router will be solid GREEN,
indicating that the Router is now
connected to the Internet.
Connecting and Configuring the Router
Alternate Setup Method
The following section describes how to set up the Router through an
Internet browser. The setup method requires that your PC directly
connected to your DSL or cable modem Internet connection is active
and working at the time of installation.
Modem Requirements
Your cable or DSL modem must be equipped with an RJ45 Ethernet
port. Many modems have both an RJ45 Ethernet port and a USB
connection. If you have a modem with both Ethernet and USB, and
are using the USB connection at this time, you will be instructed to
use the RJ45 Ethernet port during the installation procedure. If your
modem has only a USB port, you can request a different type of
modem from your ISP, or you can, in some cases, purchase a modem
that has an RJ45 Ethernet port on it.
Ethernet
USB
20
Connecting and Configuring the Router
Step 1
Connect your Router
1.1 Turn off the power to your modem by unplugging the power
1.2 Locate the network cable that is connected between your
modem and your computer and unplug it from your computer,
leaving the other end connected to your modem.
1.3 Plug the loose end of the cable you just unplugged into the port
on the back of the Router labeled “Internet/WAN”.
1.4 Connect the included network cable from the back of the
computer to one of the ports labeled “1–4”.
Note: It does not matter which numbered port you choose.
1.5
Turn your cable or DSL modem on by reconnecting the power
supply to the modem.
1.6 Before plugging the power cord into the Router, plug the cord
Mac or PC computer that
was originally connected to
the cable or DSL modem
To
Power adapter
Supplied blue Ethernet
cable (to the computer)
Existing network cable
(that came with modem)
Cable or
DSL modem
21
section
supply from the modem.
Connecting and Configuring the Router
into the wall, then plug the cord into the Router’s power jack.
1.7 Verify that your modem is connected to the Router by checking
the lights on the TOP of the Router. The green light labeled
“WAN” should be ON if your modem is connected correctly to
the Router. If it is not, recheck your connections.
1.8 Verify that your computer is connected properly to the Router
by checking the lights labeled “LAN 1,2,3,4”. The light that
corresponds to the numbered port connected to your computer
should be ON, if your computer is connected properly. If it is
not, recheck your connections.
Step 2
Set your computer’s network settings to work with a
DHCP server
See the section in this User Manual called “Manually Configuring
Network Settings” for directions.
Step 3
Configure the Router using the Web-Based Advanced
User Interface
Using your Internet browser, you can access the Router’s Web-Based
Advanced User Interface. In your browser, type “192.168.2.1” (do
not type in anything else such as “http://” or “www”). Then press the
“Enter” key.
22
Connecting and Configuring the Router
Logging into the Router
Logging out of the Router
One computer at a time can log into the Router for the purposes
of making changes to the settings of the Router. Once a user has
logged in to make changes, there are two ways that the computer
can be logged out. Clicking the “Logout” button will log the computer
out. The second method is automatic. The login will time out after
a specified period of time. The default login timeout is 10 minutes.
This can be set for any number of minutes from one to 99. For more
information, see the section in this manual titled “Changing the Login
Timeout Setting” on page 69.
23
section
You will see the Router’s home page in your browser window. The
home page is visible to any user who wants to see it. To make any
changes to the Router’s settings, you have to log in. Clicking the
“Login” button or clicking on any one of the links on the home page
will take you to the login screen. The Router ships with no password
entered. In the login screen, leave the password blank and click the
“Submit” button to log in.
Connecting and Configuring the Router
Understanding the Web-Based Advanced User Interface
The home page is the first page you will see when you access the
Advanced User Interface (UI). The home page shows you a quick view
of the Router’s status and settings. All advanced setup pages can be
reached from this page.
(10)
(2)
(5)
(4)
(3)
(6)
(1)
(7)
(8)
(9)
1.
Quick-Navigation Links
You can go directly to any of the Router’s advanced UI pages by
clicking directly on these links. The links are divided into logical
categories and grouped by tabs to make finding a particular
setting easier to find. Clicking on the purple header of each tab
will show you a short description of the tab’s function.
2.
Home Button
The home button is available in every page of the UI. Pressing
this button will take you back to the home page.
3.
Internet Status Indicator
This indicator is visible in all pages of the Router, indicating
the connection status of the Router. When the indicator says
“connection OK” in GREEN, the Router is connected to the
Internet. When the Router is not connected to the Internet, the
indicator will read “no connection” in RED. The indicator is
automatically updated when you make changes to the settings of
the Router.
24
Connecting and Configuring the Router
4.
Login/Logout Button
5.
6.
LAN Settings
Features
Internet Settings
Shows the settings of the Internet/WAN side of the Router that
connects to the Internet. Changes to any of these settings can
be made by clicking on the links or by clicking on the “Internet/
WAN” quick-navigation link on the left side of the screen.
9.
The “Help” button gives you access to the Router’s help pages.
Help is also available on many pages by clicking “more info” next
to certain sections of each page.
Shows the status of the Router’s NAT, firewall, and wireless
features. Changes can be made to the settings by clicking on any
one of the links or by clicking the quick-navigation links on the
left side of the screen.
8.
Help Button
Shows you the settings of the Local Area Network (LAN) side of
the Router. Changes can be made to the settings by clicking on
any one of the links (IP Address, Subnet Mask, DHCP Server) or
by clicking the “LAN” quick-navigation link on the left side of
the screen.
7.
Version Info
Shows the firmware version, boot-code version, hardware
version, and serial number of the Router.
10. Page Name
The page you are on can be identified by this name. This manual
will sometimes refer to pages by name. For instance “LAN > LAN
Settings” refers to the “LAN Settings” page.
25
section
This button enables you to log in and out of the Router with the
press of one button. When you are logged into the Router, this
button will change to read “Logout”. Logging into the Router will
take you to a separate login page where you will need to enter a
password. When you are logged in to the Router, you can make
changes to the settings. When you are finished making changes,
you can log out of the Router by clicking the “Logout” button.
For more information about logging into the Router, see the
section called “Logging into the Router”.
Connecting and Configuring the Router
Step 4 Configuring your Router for Connection to your Internet
Service Provider (ISP)
The “Internet/WAN” tab is where you will set up your Router to
connect to your Internet Service Provider (ISP). The Router is capable
of connecting to virtually any ISP’s system provided you have
correctly configured the Router’s settings for your ISP’s connection
type. Your ISP connection settings are provided to you by your ISP.
To configure the Router with the settings that your ISP gave you,
click “Connection Type” (1) on the left side of the screen. Select
the connection type you use. If your ISP gave you DNS settings,
clicking “DNS” (2) allows you to enter DNS address entries for ISPs
that require specific settings. Clicking “MAC address” (3) will let you
clone your computer’s MAC address or type in a specific WAN MAC
address, if required by your ISP. When you have finished making
settings, the “Internet Status” indicator will read “connection OK” if
your Router is set up properly.
(1)
(2)
(3)
26
Connecting and Configuring the Router
Setting your Connection Type
From the connection type page, you can select the type of connection you
use. Select the type of connection you use by clicking the button (1) next
to your connection type and then clicking “Next” (2).
(1)
(2)
27
section
Connecting and Configuring the Router
Setting your Internet Service Provider (ISP) Connection Type
to Dynamic IP
A dynamic connection type is the most common connection type
found with cable modems. Setting the connection type to “dynamic”
in many cases is enough to complete the connection to your ISP.
Some dynamic connection types may require a host name. You can
enter your host name in the space provided if you were assigned one.
Your host name is assigned by your ISP. Some dynamic connections
may require that you clone the MAC address of the PC that was
originally connected to the modem.
(1)
(2)
(3)
1.
Host Name
This space is provided to enter a host name that needs to be
visible to your ISP. Enter your host name here and click “Apply
Changes” (3). If your ISP did not assign you a host name, or you
are not sure, leave this blank.
2.
Change WAN MAC Address
If your ISP requires a specific MAC address to connect to the
service, you can enter a specific MAC address or clone the
current computer’s MAC address through this link.
28

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2004:12:28 15:51:09+08:00
Create Date                     : 2004:12:28 15:50:36+08:00
Title                           : P74743_F6D3230-4_AG_man_12-04.indd
Creator                         : Adobe InDesign CS (3.0.1)
Producer                        : Adobe PDF Library 6.0
Page Count                      : 10
Mod Date                        : 2004:12:28 15:51:09+08:00
Creation Date                   : 2004:12:28 15:50:36+08:00
Metadata Date                   : 2004:12:28 15:51:09+08:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools