Delta Electronics LMWP200A WLAN PCMCIA Card Module User Manual 10 100Mbps Ethernet Switch

Delta Networks, Inc. WLAN PCMCIA Card Module 10 100Mbps Ethernet Switch

Contents

Finalized Manual

Download: Delta Electronics LMWP200A WLAN PCMCIA Card Module User Manual 10 100Mbps Ethernet Switch
Mirror Download [FCC.gov]Delta Electronics LMWP200A WLAN PCMCIA Card Module User Manual 10 100Mbps Ethernet Switch
Document ID319914
Application IDJuyelCS0hEFAnXR3ENBdoA==
Document DescriptionFinalized Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize2.14kB (26704 bits)
Date Submitted2003-04-22 00:00:00
Date Available2002-08-07 00:00:00
Creation Date2003-04-22 19:01:27
Producing SoftwareAcrobat Distiller 4.05 for Windows
Document Lastmod2003-04-22 19:01:46
Document Title10/100Mbps Ethernet Switch
Document CreatorMicrosoft Word 9.0
Document Author: jack.chang

Delta Networks, Inc.
WLAN PCMCIA Card
LM-WP200
MA401 rev. B
Delta Networks, Inc.
DNI
252, Shang Ying Road, Kuei Shan
Taoyuan Shien, Taiwan, R.O.C.
Tel: +886 2 8797 2088
Fax: +886 2 2659 1462
Delta Networks, Inc.
Installation Guide for the RF Module
This module has been authorized under FCC ID: PD5LMWP200A under mobile module
approval category. The integrator of this module has to be aware that this module can
only be used in mobile host equipment such as Access Point or Router.
The host equipment should provide an internal mini-pci interface for the main board of
this module. Also the housing of the host equipment should provide an antenna socket
for the installation of the filed antenna.
The folded part of these antennas has to be fixed with the housing of the host equipment,
which makes the end users impossible to remove the antenna unless destroy the housing.
The photo of this antenna is shown below, also the folded part of each antenna type has
been indicated.
Folded Part
Delta Networks, Inc.
Warning Statement
Since this module is authorized under module approval category. So, the end product
integrator should be aware that the antenna of the end product has to be kept at least
20cm away from the human being under normal use condition.
Also the end product integrator has to label the end product to insure that the end user is
aware of a wireless module has been installed. The statement could be “ This product
contains an FCC certified wireless module with FCC ID: PD5LMWP200A” or similar
wording.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Producer                        : Acrobat Distiller 4.05 for Windows
Creator                         : Microsoft Word 9.0
Modify Date                     : 2003:04:22 19:01:46+08:00
Author                          : jack.chang
Title                           : 10/100Mbps Ethernet Switch
Create Date                     : 2003:04:22 19:01:27
Page Count                      : 4
Page Mode                       : UseNone
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PD5LMWP200A

Navigation menu