Delux Industry G07UF01 Wireless Dongle User Manual

Shenzhen Delux Industry Co., Ltd. Wireless Dongle

user manual

10M Effective DistanceBattery installation1. Open the battery coverWorking EnvironmentDebugging tips ■■Features2.4G Wireless MouseTO CREATE VALUE FOR OUR CUSTOMERSUser Manual■■ Tips: Please take out the batteries if you do not use the wireless mouse for long time, and keep them in a cool and dry place. Please do not use the battery if leaking, discoloration, distortion or other abnormity happens.■■2. Put battery in correct direction3. Cover the battery cover In order to achieve the best economical effect, the intelligent power saving technology is adopted. When your mouse stops moving, it will switch to the power-saving mode automatically,and as the time pass, it will use less and less power.Tips:1.Keep the ON/ OFF switch on OFF mode if you do not use the mouse for a long time.2. It will save more power to use the mouse on light color media than the dark one.Connection of the receiverConnecting the receiver to the PC by the USB port, for desktop, USB extending port or front-set USB port is better.When the receiver is plugged into USB port, computer will detect the device automatically. Mouse could works normally with ON modeIf the mouse can't work normally, you should build up connections between the mouse and receiver Pull out the receiver from the USB port, press the left, right and middle buttons then press the power ON/OFF switch to ON. One second later, release the key and connect the receiver to the USB port. The distance between mouse and receiver is about 20 cm. If the mouse can work, the connection is successfully built. If not, repeat the above steps. Building up connection betweenthe mouse and receiverThe radio signal can penetrate lignin, glass and otherthe non-metallic objects, realizing 360 degree free transmit, however, it can not penetrate the metal materials.So please not put the mouse, keyboard and the receiver onto the metallic tabletop. The ideal distance is above 20 CM.Please be sure there is no big metal between the mouse and receiver, otherwise the connection will be affected; for desktop, USB extending portor front-set USB port is better.The receiver should be far away from the monitor, outside disc driver or other electronic products.20 CM distance is suggested in order to prevent the radio disturbance produced by other electronic products. Optical mouse is suitable for operating media wooden,paper or cloth, but not for the lens cover, such as glass and smooth rubber. A mouse pad is needed in such environment. The standardized receiving distance we offered is under certain radio disturbance environment,the normal environment are better, the actual receiving distance is higher than standardized, but if mix-machine, motor, electric drill and other strong electronic equipments operating nearby, which may lead to slowly receiving or other abnormity.Reduce the distance of the receiver and the mouse Put the “on-off” button to “On”Make sure the battery is correctly installed.2.4G wireless technology, 16 channel intelligent frequencyAdvanced and precise optical positioning technology, fast and flexible cursorWith ON/OFF switch, OFF mode would save power if the mouse doesn't work for a long time Intelligent power-saving mode, able to prolong the battery using timeRe-establish the mouse and the receiver communication channel.Check whether the battery capacity is enough Check the receiver again, and make sure it is connected to the USB port. M102GX+G07UFFCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

Navigation menu