Delux Industry G07UF01 Wireless Dongle User Manual
Shenzhen Delux Industry Co., Ltd. Wireless Dongle
user manual
Debugging tips 2.4G Wireless Mouse Check the receiver again, and make sure it is connected to the USB port. Make sure the battery is correctly installed. Put the “on-off” button to “On” M102GX+G07UF Check whether the battery capacity is enough Reduce the distance of the receiver and the mouse User Manual Re-establish the mouse and the receiver communication channel. TO CREATE VALUE FOR OUR CUSTOMERS 10M Effective Distance Features ■ ■ ■ ■ 2.4G wireless technology, 16 channel intelligent frequency Advanced and precise optical positioning technology, fast and flexible cursor With ON/OFF switch, OFF mode would save power if the mouse doesn't work for a long time Intelligent power-saving mode, able to prolong the battery using time Tips: ■ ■ Please take out the batteries if you do not use the wireless mouse for long time, and keep them in a cool and dry place. Please do not use the battery if leaking, discoloration, distortion or other abnormity happens. Battery installation 1. Open the battery cover 2. Put battery in correct direction 3. Cover the battery cover In order to achieve the best economical effect, the intelligent power saving technology is adopted. When your mouse stops moving, it will switch to the powersaving mode automatically,and as the time pass, it will use less and less power. Tips: 1.Keep the ON/ OFF switch on OFF mode if you do not use the mouse for a long time. 2. It will save more power to use the mouse on light color media than the dark one. The radio signal can penetrate lignin, glass and other the non-metallic objects, realizing 360 degree free transmit, however, it can not penetrate the metal materials.So please not put the mouse, keyboard and the receiver onto the metallic tabletop. The ideal distance is above 20 CM. Connection of the receiver Connecting the receiver to the PC by the USB port, for desktop, USB extending port or front-set USB port is better. When the receiver is plugged into USB port, computer will detect the device automatically. Mouse could works normally with ON mode If the mouse can't work normally, you should build up connections between the mouse and receiver Building up connection between the mouse and receiver Pull out the receiver from the USB port, press the left, right and middle buttons then press the power ON/OFF switch to ON. One second later, release the key and connect the receiver to the USB port. The distance between mouse and receiver is about 20 cm. If the mouse can work, the connection is successfully built. If not, repeat the above steps. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Working Environment This device must not be co-located or operating in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. Please be sure there is no big metal between the mouse and receiver, otherwise the connection will be affected; for desktop, USB extending port or front-set USB port is better. The receiver should be far away from the monitor, outside disc driver or other electronic products. 20 CM distance is suggested in order to prevent the radio disturbance produced by other electronic products. Optical mouse is suitable for operating media wooden,paper or cloth, but not for the lens cover, such as glass and smooth rubber. A mouse pad is needed in such environment. The standardized receiving distance we offered is under certain radio disturbance environment, the normal environment are better, the actual receiving distance is higher than standardized, but if mix-machine, motor, electric drill and other strong electronic equipments operating nearby, which may lead to slowly receiving or other abnormity.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 1 Create Date : 2012:09:18 16:55:32+08:00 Modify Date : 2012:09:18 16:55:32+08:00 Producer : Corel PDF Engine Version 15.2.0.686 Author : 黄光磊 Creator : CorelDRAW X5 Title : M120+G00UF 无线GX鼠标通用中性英文说明书.cdrEXIF Metadata provided by EXIF.tools