Denon Rcd N7 Users Manual 1.RCDN7E3_ENG_008

RCD-N7 to the manual 18b00707-0572-4272-8d34-24882516a474

: Denon Denon-Rcd-N7-Users-Manual-221251 denon-rcd-n7-users-manual-221251 denon pdf

Open the PDF directly: View PDF .
Page Count: 58

Download
Open PDF In Browser	View PDF

NETWORK CD RECEIVER

RCD-N7
Owner’s Manual
Manuel de l’Utilisateur
Manual del usuario

1.RCDN7E3_ENG_008.indd F1

2010/09/03 11:11:34

1.RCDN7E3_ENG_008.indd F2

2010/09/03 11:11:35

ESPAÑOL FRANCAIS ENGLISH

n SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended
to alert the user to the presence of
uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

IMPORTANT SAFETY
INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.

8.

9.

10.

WARNING:

11.

TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.

12.

CAUTION:
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
THIS PRODUCT SHOULD NOT BE ADJUSTED
OR REPAIRED BY ANYONE EXCEPT
PROPERLY QUALIFIED SERVICE PERSONNEL.

13.
14.

n Laser Class (IEC 60825-1:2001)




$-"44



-"4&3 130%6$5

15.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer's
instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand,
tripod, bracket, or table specified by
the manufacturer, or sold with the
apparatus.
When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from tipover.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Batteries shall not be exposed to excessive heat such
as sunshine, fire or the like.

FCC Information (For US customers)

IC Information (For Canadian customers)

1. COMPLIANCE INFORMATION
Product Name: Network CD Receiver
Model Number: RCD-N7
This product contains FCC ID: PPQ-CR8702G.
This product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this product may not cause harmful interference,
and (2) this product must accept any interference
received, including interference that may cause
undesired operation.
Denon Electronics (USA), LLC
(a D & M Holdings Company)
100 Corporate Drive
Mahwah, NJ 07430-2041
Tel. (800) 497-8921

1. PRODUCT
This product contains IC 4491A-CR8702G.
This product complies with RSS-210 of Industry
Canada. Operation is subject to the following two
conditions: (1) this product may not cause harmful
interference, and (2) this product must accept any
interference received, including interference that
may cause undesired operation.
This Class B digital apparatus complies with
Canadian ICES-003.

2. IMPORTANT NOTICE: DO NOT MODIFY THIS
PRODUCT
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modification not expressly approved
by DENON may void your authority, granted by the
FCC, to use the product.
3. CAUTION
• To comply with FCC RF exposure compliance
requirement, separation distance of at least 20 cm
must be maintained between the antenna of this
product and all persons.
• This product and its antenna must not be
co-located or operating in conjunction with any
other antenna or transmitter.
4. NOTE
This product has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This product generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this product does cause
harmful interference to radio or television reception,
which can be determined by turning the product
OFF and ON, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the product into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the local retailer authorized to distribute
this type of product or an experienced radio/TV
technician for help.

APPAREIL
Cet appareil contiens IC 4491A-CR8702G.
Cet appareil est conforme à la norme CNR-210 du
Canada. L’utilisation de ce dispositif est autorisée
seulement aux deux conditions suivantes : (1) il ne
doit pas produire de brouillage, et (2) l’utilisateur du
dispositif doit être prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage est
susceptible de compromettre le fonctionnement du
dispositif.
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
2. CAUTION
To reduce potential radio interference to other
users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that permitted for
successful communication.
ATTENTION
Afin de réduire le risque d’interférence aux autres
utilisateurs, il faut choisir le type d’antenne et
son gain de façon à ce que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne soit pas
supérieure au niveau requis pour l’obtention d’une
communication satisfaisante.

For Canadian customers:
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.

I

1.RCDN7E3_ENG_008.indd F3

2010/09/03 11:11:35

ENGLISH FRANCAIS ESPAÑOL
CAUTION:
To completely disconnect this product from the mains,
disconnect the plug from the wall socket outlet.
The mains plug is used to completely interrupt the power
supply to the unit and must be within easy access by
the user.

VORSICHT:
Um dieses Gerät vollständig von der Stromversorgung
abzutrennen, ziehen Sie bitte den Stecker aus der
Wandsteckdose.
Der Netzstecker wird verwendet, um die Stromversorgung
zum Gerät völlig zu unterbrechen; er muss für den
Benutzer gut und einfach zu erreichen sein.

PRECAUTION:
Pour déconnecter complètement ce produit du courant
secteur, débranchez la prise de la prise murale.
La prise secteur est utilisée pour couper complètement
l’alimentation de l’appareil et l’utilisateur doit pouvoir y
accéder facilement.

ATTENZIONE:
Per scollegare completamente questo prodotto dalla rete
di alimentazione elettrica, scollegare la spina dalla relativa
presa a muro.
La spina di rete viene utilizzata per interrompere
completamente l’alimentazione all’unità e deve essere
facilmente accessibile all’utente.

PRECAUCIÓN:
Para desconectar completamente este producto de
la alimentación eléctrica, desconecte el enchufe del
enchufe de la pared.
El enchufe de la alimentación eléctrica se utiliza para
interrumpir por completo el suministro de alimentación
eléctrica a la unidad y debe de encontrarse en un lugar al
que el usuario tenga fácil acceso.

WAARSCHUWING:
Om de voeding van dit product volledig te onderbreken
moet de stekker uit het stopcontact worden getrokken.
De netstekker wordt gebruikt om de stroomtoevoer naar
het toestel volledig te onderbreken en moet voor de
gebruiker gemakkelijk bereikbaar zijn.

FÖRSIKTIHETSMÅTT:
Koppla loss stickproppen från eluttaget för att helt skilja
produkten från nätet.
Stickproppen används för att helt bryta strömförsörjningen
till apparaten, och den måste vara lättillgänglig för
användaren.

n NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / n CAUTIONS ON INSTALLATION
NOTAS SOBRE EL USO
WARNINGS

AVERTISSEMENTS

ADVERTENCIAS

• Avoid high temperatures.
Allow for sufficient heat
dispersion when installed in a
rack.
• Handle the power cord carefully.
Hold the plug when unplugging
the cord.
• Keep the unit free from
moisture, water, and dust.
• Unplug the power cord when
not using the unit for long
periods of time.
• Do not obstruct the ventilation
holes.
• Do not let foreign objects into
the unit.
• Do not let insecticides,
benzene, and thinner come in
contact with the unit.
• Never disassemble or modify
the unit in any way.
• Ventilation should not be
impeded by covering the
ventilation openings with
items, such as newspapers,
tablecloths or curtains.
• Naked flame sources such as
lighted candles should not be
placed on the unit.
• Observe and follow local
regulations regarding battery
disposal.
• Do not expose the unit to
dripping or splashing fluids.
• Do not place objects filled with
liquids, such as vases, on the
unit.
• Do not handle the mains cord
with wet hands.
• When the switch is in the OFF
position, the equipment is not
completely switched off from
MAINS.
• The equipment shall be
installed near the power supply
so that the power supply is
easily accessible.

• Eviter des températures
élevées.
Tenir compte d’une dispersion
de chaleur suffisante lors de
l’installation sur une étagère.
• Manipuler le cordon
d’alimentation avec précaution.
Tenir la prise lors du
débranchement du cordon.
• Protéger l’appareil contre
l’humidité, l’eau et la poussière.
• Débrancher le cordon
d’alimentation lorsque l’appareil
n’est pas utilisé pendant de
longues périodes.
• Ne pas obstruer les trous
d’aération.
• Ne pas laisser des objets
étrangers dans l’appareil.
• Ne pas mettre en contact des
insecticides, du benzène et un
diluant avec l’appareil.
• Ne jamais démonter ou
modifier l’appareil d’une
manière ou d’une autre.
• Ne pas recouvrir les orifi ces
de ventilation avec des objets
tels que des journaux, nappes
ou rideaux. Cela entraverait la
ventilation.
• Ne jamais placer de flamme
nue sur l'appareil, notamment
des bougies allumées.
• Veillez à respecter les lois en
vigueur lorsque vous jetez les
piles usagées.
• L’appareil ne doit pas être
exposé à l’eau ou à l’humidité.
• Ne pas poser d’objet contenant
du liquide, par exemple un
vase, sur l’appareil.
• Ne pas manipuler le cordon
d’alimentation avec les mains
mouillées.
• Lorsque l’interrupteur est sur
la position OFF, l’appareil n’est
pas complètement déconnecté
du SECTEUR (MAINS).
• L’appareil sera installé près de
la source d’alimentation, de
sorte que cette dernière soit
facilement accessible.

• Evite altas temperaturas.
Permite la suficiente dispersión
del calor cuando está instalado
en la consola.
• Maneje el cordón de energía
con cuidado.
Sostenga el enchufe cuando
desconecte el cordón de
energía.
• Mantenga el equipo libre de
humedad, agua y polvo.
• Desconecte el cordón de
energía cuando no utilice el
equipo por mucho tiempo.
• No obstruya los orificios de
ventilación.
• No deje objetos extraños
dentro del equipo.
• No permita el contacto
de insecticidas, gasolina y
diluyentes con el equipo.
• Nunca desarme o modifique el
equipo de ninguna manera.
• La ventilación no debe quedar
obstruida por haberse cubierto
las aperturas con objetos
como periódicos, manteles o
cortinas.
• No deberán colocarse sobre
el aparato fuentes inflamables
sin protección, como velas
encendidas.
• A la hora de deshacerse de las
pilas, respete la normativa para
el cuidado del medio ambiente.
• No exponer el aparato al goteo
o salpicaduras cuando se
utilice.
• No colocar sobre el aparato
objetos llenos de líquido, como
jarros.
• No maneje el cable de
alimentación con las manos
mojadas.
• Cuando el interruptor está en la
posición OFF, el equipo no está
completamente desconectado
de la alimentación MAINS.
• El equipo se instalará cerca
de la fuente de alimentación
de manera que resulte fácil
acceder a ella.

PRÉCAUTIONS D’INSTALLATION
EMPLAZAMIENTO DE LA INSTALACIÓN
z
z

z
/&5803,
$%
3&$&*7&3

3$%/

z

Wall
Paroi
Pared

z For proper heat dispersal, do not install this unit in a
confined space, such as a bookcase or similar enclosure.
• More than 0.3 m (12 in.) is recommended.
• Do not place any other equipment on this unit.
z Pour permettre la dissipation de chaleur requise,
n’installez pas cette unité dans un espace confiné tel
qu’une bibliothèque ou un endroit similaire.
• Une distance de plus de 0,3 m (12 po.) est recommandée.
• Ne placez aucun matériel sur cet appareil.
z Para la dispersión del calor adecuadamente, no instale
este equipo en un lugar confinado tal como una librería
o unidad similar.
• Se recomienda dejar más de 0,3 m (12 pulg.) alrededor.
• No coloque ningún otro equipo sobre la unidad.

II

1.RCDN7E3_ENG_008.indd F4

2010/09/03 11:11:36

ENGLISH

Getting started ·······································································2

Specifications ········································································51

Index

Advanced operations·························································27

Specifications

Index ··························································································52

Troubleshooting

Troubleshooting···································································47

Explanation terms

Preparations ················································································11
Turning the power on ·································································11
Turning the power off ·································································11
Setting the current time (Auto Adjust) (12-Hour Display) ···········11
Operations possible during playback ········································12
Input source switching ·······························································12
Adjusting the master volume······················································12
Muting the sound ·······································································12
Adjusting the tone ······································································12
Setting the sleep timer ·······························································13

Explanation terms ·······························································46

Information

Basic operations···································································11

Part names and functions···························································38
Front panel ··················································································38
Top panel ····················································································39
Rear panel ···················································································39
Remote control ···········································································40
MP3 and WMA ·············································································43
MP3 and WMA formats······························································43
iPod® ····························································································43
USB memory device ···································································44
Important information ·································································44
Network audio ·············································································45
Important information ·································································45

Advanced Operations

Speaker connections ····································································5
Connecting the speaker cables·····················································5
Connecting recording components ·············································6
CD recorder / MD recorder ···························································6
Connecting a TV ············································································6
Connecting an antenna ································································7
FM/AM··························································································7
Connecting to a home network (LAN) ········································8
Wired LAN ····················································································8
Wireless LAN ················································································8
Required system···········································································8
Connecting an iPod ······································································9
iPod Dock······················································································9
USB port ·······················································································9
Connecting a USB memory device ··············································9
Connecting a portable player ·····················································10
Connecting the power cord························································10

Information ·············································································38

Basic Operations

Connections ·············································································5

Setting the network [Network] ·················································30
Connecting Wired LAN ·······························································30
Connecting Wireless LAN···························································31
Party Mode Function ··································································33
Other Network ············································································34
Setting the others [Other] ··························································35
Auto Standby ··············································································35
Screen Saver···············································································35
Using an optimizing filter ····························································35
Firmware Update ········································································35
Other functions ···········································································36
Inputting characters ····································································36
Auto power on ············································································37
Last function memory·································································37
Resetting the microprocessor ····················································37

Connections

Accessories ····················································································2
Main features ·················································································2
Cautions on handling ····································································2
About this manual ········································································2
Discs ·······························································································3
Discs playable on this unit ····························································3
Holding discs ················································································3
Loading discs ················································································3
Cautions on loading discs ·····························································3
Cautions on handling ····································································3
Cautions on storing discs······························································3
Cleaning discs ···············································································3
About the remote control·····························································4
Inserting the batteries···································································4
Operating range of the remote control ········································4

Switching the display’s brightness ·············································13
Listening with headphones·························································13
CD playback ·················································································13
Before playing a disc···································································13
Playing CDs·················································································13
Switching the display ··································································13
Playing repeatedly (Repeat playback) ········································14
Playing random order (Random playback) ··································14
Playing tracks in the desired order (Program playback) ··············14
MP3 and WMA files playback·····················································15
Playing files ·················································································15
Tuner playback ············································································16
Tuning in Broadcast Stations ······················································16
Automatically presetting FM stations (Auto preset) ···················16
Presetting FM/AM stations manually ·········································17
Listening to preset stations ························································17
Calling stations registered in Preset List ····································17
Deleting stations registered in Preset List··································17
iPod® playback············································································17
Before playing an iPod ································································17
Playing an iPod············································································17
Disconnecting the iPod ·······························································18
USB memory device playback ···················································18
Before playing a USB memory device or an iPod ·······················18
Playing files stored on USB memory devices ·····························18
Network audio playback ····························································19
Listening to internet radio ···························································19
Playing files stored on a music server ········································20
Listening to Napster ···································································21
Listening to Pandora ···································································22
Listening to Rhapsody ································································24
Portable audio player playback ·················································25
Playing portable audio player ······················································25
Listening to AUX ·········································································25
Favorite function ········································································26
Registering Internet radio stations, music servers and
tuners in Favorite List ·································································26
Calling Internet radio stations, files registered or t
uners in Favorite List ··································································26
Deleting Internet radio stations, files registered or
tuners in Favorite List ·································································26

Getting Started

Contents

Menu map ····················································································27
Setting the timer [Timer] ···························································28
Setting the everyday timer and once timer ································28
Adjusting the clock automatically [Clock] ································29
Setting the Time Zone ································································29
Setting the Summer Time ··························································29
Auto Adjust ·················································································29
Setting the current time (Manual Adjust) (12-Hour Display) ·······29

1

1.RCDN7E3_ENG_008.indd 1

2010/09/03 11:11:36

ENGLISH

Getting started
Thank you for purchasing this DENON product. To ensure proper
operation, please read these owner’s manual carefully before using
the product.
After reading them, be sure to keep them for future reference.

Main features
High quality & high power digital amplifier

Accessories
Check that the following parts are supplied with the product.

q Remote control........................................................................ 1
w R03/AAA batteries ................................................................... 2
e AC Power cord (Cord length: Approx. 6 ft/2 m) ....................... 1
r AM loop antenna ..................................................................... 1
t FM indoor antenna .................................................................. 1
y Rod antenna for wireless LAN ................................................ 1
u Owner’s manual (with Quick setup sheet) .............................. 1
i Service station list ................................................................... 1
o Warranty (for North America model only) ................................ 1
q

e

r

DLNA ver. 1.5 supported for Audio Network
Internet radio by vTuner
Equipped with a dock connector that directly
connects an iPod or iPhone to this unit
Equipped with Wi-Fi capabilities including Wi-Fi
Protected Setup (WPS)
Equipped with a filter for optimizing the response
of the speakers (sold separately)

t

y

3Lines OELD
(Organic Electroluminescence Display)

Cautions on handling
• Before turning the power switch on
Check once again that all connections are correct and that there are
no problems with the connection cables.
• Power is supplied to some of the circuitry even when the unit is
set to the standby mode. When going on vacation or leaving home
for long periods of time, be sure to unplug the power cord from the
power outlet.
• Proper ventilation
If the unit is left in a room full of smoke from cigarettes, etc., for
long periods of time, the surface of the optical pickup may get dirty,
preventing it from receiving signals properly.
• About condensation
If there is a major difference in temperature between the inside of
the unit and its surroundings, condensation may form on parts inside
the unit, causing it to fail to operate properly.
If this happens, let the unit sit for an hour or two with the power
turned off and wait until there is little difference in temperature
before using the unit.
• Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If that
occurs, move the mobile phone away from the unit when it is in use.
• Moving the unit
Turn off the power and unplug the power cord from the power outlet.
Next, disconnect the cables connected to other system units before
moving the unit.

About this manual
Stylish & compact cabinet

n Operation buttons
The operations described in this manual are based mainly on
remote control operation.

n Symbols
v

This symbol indicates a reference page on which
related information is described.
This symbol indicates a supplementary information
and tips for operations.

NOTE

This symbol indicates points to remember operations
or function limitations.

n Illustrations
Note that the illustrations in these instructions may differ from the
actual unit for explanation purposes.

2

1.RCDN7E3_ENG_008.indd 2

2010/09/03 11:11:36

ENGLISH

Discs playable on this unit
Discs marked with the logo below can be played in this unit.

• Do not get fingerprints, oil or dirt on discs.
• Take special care not to scratch discs when removing them from
their cases.
• Do not bend or heat discs.
• Do not enlarge the hole in the center.
• Do not write on the labeled (printed) surface with ball-point pens,
pencils, etc., or stick new labels on discs.
• Water droplets may form on discs if they are moved suddenly from
a cold place (outdoors for example) to a warm place, but do not try to
dry them off using a hairdryer, etc.

Figure 1

Figure 2

Outer tray guide

NOTE

12 cm disc

8 cm disc

Cautions on storing discs

• Place 8 cm discs in the inner tray guide without using an adapter.

Do not touch the signal surface.

NOTE
Do not push the disc tray in by hand when the power is turned off.
Doing so could damage the set.

Cleaning discs

Cautions on loading discs

Specifications

• Only load one disc at a time. Loading two or more discs can damage
the unit or scratch the discs.
• Do not use cracked or warped discs or discs that have been repaired
with adhesive, etc.
• Do not use discs on which the sticky part of cellophane tape or labels
is exposed or on which there are traces of where labels have been
removed. Such discs can get caught inside the player and damage it.

Troubleshooting

• If there are fingerprints or dirt on a disc, wipe them off before using
the disc. Fingerprints and dirt can impair sound quality and cause
interruptions in playback.
• Use a commercially available disc cleaning set or a soft cloth to clean
discs.

Explanation terms

• “Unsupported” is displayed if a disc that cannot be played is loaded.
• “No Disc” is displayed if the disc is loaded upside-down or if no disc
is loaded.

• Be sure to remove discs after using them.
• Be sure to store discs in their cases to protect them from dust,
scratches, warping, etc.
• Do not store discs in the following places:
1. Places exposed to direct sunlight for long periods of time
2. Dusty or humid places
3. Places exposed to heat from heaters, etc.

Information

Holding discs

Inner tray guide

Advanced Operations

• Discs in special shapes (heart-shaped discs, octagonal discs, etc.)
cannot be played. Do not attempt to play them, as doing so can
damage the unit.
• Some discs and some recording
formats cannot be played.
• Non-finalized discs cannot be
played.
• What is finalization?
Finalization is the process that
makes recorded CD-R/CD-RW discs playable on compatible players.

Basic Operations

w CD-R/CD-RW

Cautions on handling

• Place the disc in the tray, label side up.
• Make sure the disc tray is fully open when inserting the disc.
• Place the discs flat, 12 cm discs in the outer tray guide (Figure 1), 8
cm discs in the inner tray guide (Figure 2).

Connections

q Music CDs

Loading discs

Getting Started

Discs

Do not wipe in a circular motion.

Index

Gently wipe the disc from the
inside towards the outside.

NOTE
Do not use record spray, antistatic agents, benzene, thinner or other
solvents.

3

1.RCDN7E3_ENG_008.indd 3

2010/09/03 11:11:37

ENGLISH

About the remote control
Inserting the batteries

Operating range of the remote control

q Remove the rear cover of the w Set two R03/AAA batteries in
remote control.
the battery compartment in the
indicated direction.

Operate the remote control while pointing it at the remote sensor.

Approx. 23 feet/ 7 m
30°
30°

e Put the rear cover back on.

NOTE
• Insert the specified batteries in the remote control unit.
• Replace the batteries with new ones if the set does not operate
even when the remote control unit is operated close to the unit. (The
supplied batteries are only for verifying operation.)
• When inserting the batteries, be sure to do so in the proper direction,
following the q and w marks in the battery compartment.
• To prevent damage or leakage of battery fluid:
• Do not use a new battery together with an old one.
• Do not use two different types of batteries.
• Do not attempt to charge dry batteries.
• Do not short-circuit, disassemble, heat or dispose of batteries in
flames.
• Do not keep the battery in a place exposed to direct sunlight or in
places with extremely high temperatures, such as near a heater.
• If the battery fluid should leak, carefully wipe the fluid off the inside
of the battery compartment and insert new batteries.
• Remove the batteries from the remote control unit if it will not be in
use for long periods.
• Used batteries should be disposed of in accordance with the local
regulations regarding battery disposal.

NOTE
The set may function improperly or the remote control may not
operate if the remote control sensor is exposed in direct sunlight or
strong artificial light such as a fluorescent or infrared light.

4

1.RCDN7E3_ENG_008.indd 4

2010/09/03 11:11:37

ENGLISH

Speaker connections
Pin-plug cable

Carefully check the left (L) and right (R) channels and + (red) and –
(black) polarities on the speakers being connected to the unit, and be
sure to connect the channels and polarities correctly.

(Black)

Speaker cable

off about 10 mm of sheathing
1 Peel
from the tip of the speaker cable, then

WLAN ANTENNA

COAX.
75ǡ

NETWORK
ETHERNET

Advanced Operations

either twist the core wire tightly or
apply solder to it.

RCD-N7W

the speaker terminal
2 Turn
counterclockwise to loosen it.

FM
AM
R

SPEAKERS

SUBWOOFER
PREOUT

L

AUX OUT
L

SPEAKERS INPEDANCE 4-16 ǡ

AUX IN 2

AUX IN 3
(OPTICAL)
LOOP
ANT.
TUNER
ANTENNA

the speaker cable’s core wire to
3 Insert
all the way into the speaker terminal.

Information

R

AUX IN 1

Input terminals
w

w

Speaker SC-N7

Subwoofer with
built-in amp

NOTE

Index

Be sure to lower the audio volume before making speaker settings.

Specifications

L

NOTE
• Use speakers with an impedance of 4 to 16 Ω. The protection circuit
may be activated if speakers with an impedance other than specified
are used.
• Connect the speaker cables so they do not stick out of the speaker
terminals. The protection circuit may be activated if the wires
touch the rear panel or if the + and – sides touch each other
(vpage 6 “Protection circuit”).
• Never touch the speaker terminals while the power supply is
connected. Doing so could result in electric shock.
• When you connect optional speakers (SC-N7) to this unit, you can
perform the filter setting for optimal sound quality output (vpage 35
“Using an optimizing filter”).

Troubleshooting

R

q

Explanation terms

the speaker terminal clockwise
4 Turn
to tighten it.

q

Basic Operations

• Do not plug in the power cord until all connections have been
completed.
• When making connections, also refer to the owner’s manual of the
other components.
• Be sure to connect the left and right channels properly (left with left,
right with right).
• Do not bundle power supply cords together with connection cables.
Doing so can result in humming or noise.

Connecting the speaker cables

Audio cable (sold separately)

NOTE

Connections

This section explains how to connect speakers, recording
equipment, antennas and network.
For other connections, see the sections below.

Getting Started

Connections

5

1.RCDN7E3_ENG_008.indd 5

2010/09/03 11:11:37

ENGLISH
Speaker connections

Protection circuit
The protection circuit is be activated in the following situations:
• If the speaker cable wire touches the rear panel or screws or if the
speaker cable wire touches the speaker cable’s + and – sides are
touching
• If the surrounding temperature is extremely high
• If the inside of the amplifier gets hot to extended use at a high
output
If this happens, unplug the power cord, then check the connections
of the speaker cables and input cables. If the unit becomes very hot,
wait for it to cool off and improve the ventilation around it. After doing
this, plug the power cord back in.
If the protection circuit is activated even though there are no problems
with the ventilation around the unit or in connections, the unit may
be damaged. Turn off the power and then contact a DENON service
center.

Connecting recording components

Connecting a TV
• Select the connector to use and connect the device.
• To listen to TV audio through this device, use the optical digital
connection.

CD recorder / MD recorder
Cables used for connections

Cables used for connections

Audio cable (sold separately)
Stereo
pin-plug cable

Audio cable (sold separately)

(White)

L

L

(Red)

R

R

CD recorder /
MD recorder /
Tape deck

Stereo
pin-plug cable

(White)

L

L

(Red)

R

R

Optical cable
TV
"6%*0

"6%*0
"6%*0

*/
-

L

L

3

R

L

R

"6%*0
065
3

065
3

L

015*$"065

R

L

R

L

R

R

RCD-N7W

COAX.
75ǡ
A

COAX.
75ǡ

NETWORK

FM
AM

ETHERNET

AUX IN 2
FM
AM

SUBWOOFER
PREOUT

AUX OUT
L

R

AUX IN 1

AUX IN 2

AUX IN 3
(OPTICAL)
LOOP
ANT.

AUX IN 3
(OPTICAL)
LOOP
ANT.

TUNER
ANTENNA

TUNER
ANTENNA

NOTE
Other digital audio signals than 2 channel linear PCM cannot be input
through AUX IN 3 (OPTICAL) terminal of this unit.
When you try to input digital audio signals other than 2 channel linear
PCM to this unit, set the digital audio output setting of the TV to 2
channel PCM.
For details, see the operating instructions of the TV.

6

1.RCDN7E3_ENG_008.indd 6

2010/09/03 11:11:38

ENGLISH
Getting Started

Connecting an antenna
n AM loop antenna assembly

FM/AM

FM indoor antenna
(Supplied)

Loop
antenna

Projecting
part

the projecting part
2 Insert
into the square hole in
the stand.

Advanced Operations

Black

the loop antenna from
the rear and bend it
forward.

Stand
Square
hole

Basic Operations

AM loop antenna
(Supplied)

the stand section
1 Put
through the bottom of

Connections

• Connect the FM antenna or AM loop antenna supplied with the unit
to enjoy listening to radio broadcasts.
• After connecting the antenna and receiving a broadcast signal
(vpage 16 “Tuning in Broadcast Stations”), fix the antenna with
tape in a position where the noise level becomes minimal.

White

RCD-N7W

Information

COAX.
75ǡ

NETWORK

n Using the AM loop antenna
Suspending on a wall
Suspend directly on a wall without assembling.

ETHERNET

FER
T

AUX OUT

AUX IN 1

AUX IN 2

Nail, tack, etc.

AUX IN 3
(OPTICAL)

L

LOOP
ANT.

R

Explanation terms

FM
AM

Standing alone
Use the procedure shown upper to assemble.

w

Troubleshooting

TUNER
ANTENNA

q

e

Specifications

NOTE

Index

• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM
loop antenna.
• Make sure the AM loop antenna lead terminals do not touch metal
parts of the panel.
• If the signal has noise interference, connect the ground terminal
(GND) to reduce noise.
• If you are unable to receive a good broadcast signal, we recommend
installing an outdoor antenna. For details, inquire at the retail store
where you purchased the unit.

7

1.RCDN7E3_ENG_008.indd 7

2010/09/03 11:11:38

ENGLISH

Connecting to a home network (LAN)
• This unit lets you play via your home network (LAN) music files
stored on a computer and music content such as that from Internet
radio.
• You can update by downloading the latest firmware from the
DENON website.
• See “Setting the network [Network]” (vpage 30) on the menu for
more information on network setting.

n Ethernet cable (CAT-5 or greater recommended)

Wireless LAN
Modem
Computer
Internet

Wired LAN
Router with
access point

Cables used for connections
To WAN side

Cable (sold separately)

Turn
clockwise.

Ethernet
cable
Rod antenna
(supplied)

Computer
Modem

RCD-N7W

Internet

WLAN ANTENNA

ETHERNET
FM
AM
R

SPEAKERS

L

SUBWOOFER
PREOUT

AUX OUT

AUX IN 1

L

To WAN side

R
SPEAKERS INPEDANCE 4-16 ǡ

AUX IN 2

AUX IN 3
(OPTICAL)
LOOP
ANT.
TUNER
ANTENNA

To LAN port
LAN port/
Ethernet
connector

To LAN port

Required system
n Broadband internet connection
n Modem
Device that connects to the broadband circuit and conducts
communications on the Internet.
A type that is integrated with a router is also available.

RCD-N7W

• If you have an Internet provider contract for a line on which network
settings are made manually, make the settings at “Network
connecting (DHCP=Off)” (vpage 30).
• With this unit, it is possible to use the DHCP and Auto IP functions
to make the network settings automatically.
• When using this unit with the broadband router’s DHCP function
enabled, this unit automatically performs the IP address setting and
other settings.
When using this unit connected to a network with no DHCP function,
make the settings for the IP address, etc., at “Network connecting
(DHCP=Off)” (vpage 30).
• When setting manually, check the setting contents with the network
administrator.

COAX.
75ǡ

NETWORK

AC IN

Router

• Use only shielded STP or ScTP LAN cable which is available at
retailer.
• Some flat type Ethernet cables are easily affected by noise.
We recommend using a normal type cable.

NOTE
• A contract with an ISP is required to connect to the Internet.
No additional contract is needed if you already have a broadband
connection to the Internet.
• The types of routers that can be used depend on the ISP. Contact an
ISP or a computer shop for details.
• DENON assumes no responsibility whatsoever for any
communication errors or troubles resulting from customer’s network
environment or connected devices.
• This unit is not compatible with PPPoE. A PPPoE-compatible router
is required if you have a contract for a type of line set by PPPoE.
• Do not connect an ETHERNET connector directly to the LAN port/
Ethernet connector on your computer.

n Router

WLAN ANTENNA

COAX.
75ǡ

NETWORK
ETHERNET

FM
AM
SUBWOOFER

AUX OUT

AUX IN 1

AUX IN 2

AUX IN 3

For connections to the Internet, contact an ISP (Internet
Service Provider) or a computer shop.

When using this unit, we recommend you use a router equipped
with the following functions:
• Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
• Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching
hub with a speed of 100 Mbps or greater.
• When using with a wireless LAN, prepare a broadband router
with built-in access point.

8

1.RCDN7E3_ENG_008.indd 8

2010/09/03 11:11:38

ENGLISH

Connecting a USB memory device

iPod Dock

USB
memory
device

• Keep the dock for iPod’s lid closed when your iPod is not connected
to prevent any foreign objects from getting inside.
• You can use this unit to perform playback via an iPod (5th generation
or later), iPhone (3GS or earlier), iPod touch, iPod classic, or iPod
nano. For details, check the Web (www.denon.com).

Connections

Open the lid and mount the adapter suited for your iPod onto the dock
adapter included with your iPod.

Getting Started

Connecting an iPod

Basic Operations

iPod

USB port
Adapter

Cables used for connections

iPod cable

Dock connector

Information

iPod

NOTE
• A computer can not be connected to and operate the unit via its
USB port.
• Do not use an extension cable when connecting a USB memory
device.
• For details about USB memory devices, see “USB memory device”
(vpage 44).

Explanation terms

NOTE

To connect an iPod to this unit, use the iPod cable supplied with the
iPod.

Specifications

Loading

Troubleshooting

• Please make sure to fit adaptor to connector part for use with your
iPod.
• When plugging in or unplugging the iPod, please proceed carefully,
adjusting the inclination of the connector so as not to place a burden
upon the connector.

Dismantling
iPod

Index

Connector

Advanced Operations

Audio cable (sold separately)

Adapter

9

1.RCDN7E3_ENG_008.indd 9

2010/09/03 11:11:39

ENGLISH

Connecting a portable player

Connecting the power cord

Cables used for connections
Audio cable (sold separately)
Stereo
mini-plug
cable

Power cord
(Supplied)
AC IN

To household power outlet
(AC 120 V, 60 Hz)

/&5803,
$%
3&$&*7&3

3$%/

NOTE

Portable
Audio

• Only use the supplied power cord.
• Be sure the power cord is unplugged from the power outlet before
connecting or disconnecting it to the AC IN.

)&"%1)0/&

Connect this unit and portable audio player using a separately sold
mini-stereo audio cable.

NOTE
After you connect a portable audio player, the input source
automatically switches to “Portable In”.

10

1.RCDN7E3_ENG_008.indd 10

2010/09/03 11:11:39

ENGLISH

Symbols used to indicate buttons in this manual

Button only on the main unit
Button only on the remote control

n Setting the timer [Timer] (vpage 28)
n Setting the others [Other] (vpage 35)

Press ON/STANDBY.
The power indicator turns off, and so does the power.

NOTE

Basic Operations

BUTTON

[BUTTON]

Turning the power off

Connections

Button located on both the main unit and the remote control

This section provides information on basic operations such as
settings and playback procedures.
For other operations, see the sections below.

Getting Started

Basic operations

Be sure to stop playback before turning the power off.

Preparations
Turning the power on

/&5803,
$%
3&$&*7&3

3$%/

NOTE

Explanation terms

ON/STANDBY

Troubleshooting

• When you turn on the power of this unit for the first time after
purchasing it, the Network First Setup menu starts up.
• If you cancelled “Network First Setup” or changed the network
environment, perform “Menu” − “Network” − “Network First
Setup”.
• Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time, either press ON/STANDBY to turn off the power, or
unplug the power cord from the power outlet.
• Be sure to stop playback before turning the power off.

• When the unit is connected to the Internet, the current time is set
automatically.
• The default Time Zone setting of this unit is the Eastern Standard
Time zone.
To change the Time Zone and Summer Time, see “Adjusting the
clock automatically [Clock]” (vpage 29).
• When the unit is not connected to the Internet, set the current time
manually. See “Setting the current time (Manual Adjust) (12-Hour
Display)” (vpage 29).

Information

ON/STANDBY

• The power turns on. Press again to set the power to standby.
• Power indicator
Standby ...................................Off
Power on.................................Green
When the timer is set .............Orange

Advanced Operations

Press ON/STANDBY.

Setting the current time (Auto Adjust)
(12-Hour Display)

n Completely turning off the power

Specifications

Unplug the power cord from the wall outlet.
• Note that the time setting is cleared when the power cord is
unplugged from the outlet.
• The settings made for the various functions may be cleared if the
power cord is left unplugged from a power outlet for an extended
period of time.

Index

11

1.RCDN7E3_ENG_008.indd 11

2010/09/03 11:11:39

ENGLISH

Operations possible during playback

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control

BUTTON

[BUTTON]

Button only on the main unit
Button only on the remote control

ON/STANDBY <5>

<1/3 ENTER>
o ui
p

/&5803,
$%
3&$&*7&3

3$%/

Input source switching

Adjusting the tone

Press  and ui to select the input source,
then press [ENTER], <1/3 ENTER> or p.

[SDB TONE] to select the tone parameter to be
1 Use
adjusted.
SDB

Favorite

iPod

AUX1

Internet Radio

USB

AUX2

Music Server

FM

AUX3(OPT)

Napster

AM

Menu

Pandora

CD

Rhapsody

Portable Inz

S.Direct

VOLUME df

[SLEEP]
[Input source select]
[8]
[6]
[2]
[MUTE]
[SDB TONE]
[ENTER]
o

<

[DIMMER]
ON/STANDBY
[CD]
[1/3]
[9]
[7]

>

z“Portable In” appears only when the portable audio player is
connected to portable in jack.

Press [Input source select] ([FAVORITE], [INTERNET
RADIO], [MUSIC SERVER], [ONLINE MUSIC], [iPod],
[USB], [TUNER], [CD] or [AUX]).

Press VOLUME df.
The volume level is displayed.

VOLUME df
u
p

[Adjustable range]
VOLUME 0 - 60

Default is “3”.

Muting the sound

Balance

• To make other tone adjustments at this time, press [SDB
TONE].
• If no operation is performed for 5 seconds, the adjustment is
retained and the normal display reappears.

SDB

Emphasize the bass sound. (Super Dynamic Bass)
[Selectable modes]

–

OFF

–10dB

–

+10dB

–

+10dB

Adjusts the treble sound.
[Variable range]

BALANCE

ON

Adjusts the bass sound.
[Variable range]

TREBLE

–10dB

Adjusts the left/right volume balance.
[Variable range]

S.DIRECT

Adjusting the master volume

Treble

2 Adjust the volume with o p.

BASS



Bass

L6

–

CENTER

–

R6

The tone is not adjusted.
This can also be set using (SOURCE DIRECT).

Settings made upon purchase:
• SDB .......................................OFF
• BASS ..................................... 0dB
• TREBLE ................................. 0dB
• BALANCE.......................CENTER

SDB, BASS and TREBLE can be set simultaneously.

Press [MUTE].

i

“MUTING” is displayed.

[NUMBER]

[DISPLAY]

To cancel, press [MUTE] again.
(The mute mode is also canceled when VOLUME df is pressed.)

12

1.RCDN7E3_ENG_008.indd 12

2010/09/03 11:11:40

ENGLISH

CD playback
This section explains how to playback CDs.

Use this function to automatically switch the power to the standby
mode after a specific amount of time (minutes).
The sleep timer can be set to up to 90 minutes, in steps of 10 minutes.

Before playing a disc

• Press the button to select the setting time.
• After about 5 seconds, the setting is entered and the display
returns to as it was before.

Either press [SLEEP] to select “Sleep1OFF” or press ON/
STANDBY.

n To check the time remaining until the sleep
timer is activated
Press [SLEEP].

3 Insert a disc (vpage 3).

• Press <5> to open/close the disc tray.
• The disc tray also closes when <1/3 ENTER> or [1/3] is
pressed.

NOTE

Press <1/3 ENTER> or [1/3].
3 is displayed.
• To resume playback, press <1/3 ENTER> or [1/3].

n Fast-forwarding and fast-reversing (searching)
During playback, press and hold in [6, 7].

n Moving to the beginning of tracks (skipping)
During playback, press [8, 9] or .
• The disc skips as many tracks as times the button is pressed.
• When you press reverse once, playback returns to the beginning
of the current track.

n To play the desired track (remote control only)
Press [NUMBER] (0 – 9, +10) to select the track.
GExampleH Track 4
: [4]
GExampleH Track 12 : [+10], [2]
GExampleH Track 20 : [+10], [+10], [0]

Switching the display’s brightness

Playing CDs

Switching the display

Press [DIMMER].

Press <1/3 ENTER> or [1/3].

Press [DISPLAY].

100%
25%

Elapsed time of
current track

Remaining time
of current track

Information

Off

The “1” indicator lights and playback begins.

75%

Advanced Operations

• Do not place any foreign objects in the disc tray. Doing so could
damage it.
• Do not push the disc tray in by hand when the power is turned off.
Doing so could damage the set.

n Stopping playback temporarily

50%

• The display’s brightness switches each time the button is pressed.

Remaining time for
all remaining tracks
• The display switches each time the button is pressed.

Explanation terms

If you operate the buttons when the display’s brightness is set to
“Off”, the display temporarily lights at 25% brightness level.

• If the input source is set to something other than “ ”, press [CD]
to switch the input source to “ ”.
• The input source can also be switched to “ ” using 
(vpage 12).

Troubleshooting

Listening with headphones
Plug the headphones (sold separately) into <

Advanced Connections

n Canceling the sleep timer

If no disc is loaded “No Disc” is displayed.

Press [2].

Basic Operations

Press [SLEEP] during playback and select the setting
time.

1 Press ON/STANDBY.
Press  and ui to select to “ ”, then
2 press
[ENTER], <1/3 ENTER> or p, or press [CD].

n Stopping playback

Connections

Setting the sleep timer

Getting Started

Operations possible during playback

>.

• The sound from the speakers is automatically cut off.

Specifications

NOTE
To prevent hearing loss, do not raise the volume level excessively
when using headphones.

Index

13

1.RCDN7E3_ENG_008.indd 13

2010/09/03 11:11:41

ENGLISH
CD playback
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control

BUTTON

[BUTTON]

Button only on the main unit
Button only on the remote control

<1/3 ENTER> o u

pi

Press [REPEAT].

Playing tracks in the desired order
(Program playback)

Playback in the respective repeat mode starts.

Up to 25 tracks can be programmed.

Playing repeatedly (Repeat playback)

Single-track repeat

All-track repeat

Repeat off
(indicator turns off)

1 In the stop mode, press [PROGRAM].
2 Use [NUMBER] (0 – 9, +10) to select the tracks.
“Program” is displayed.

GExampleH To program tracks 3, 12, 7 to play in that order:
Press [PROGRAM], [3], [+10], [2], [7].

[Selectable items]
1 (Single-track repeat)

Only 1 track plays repeatedly.

ALL (All-track repeat)

All tracks play repeatedly.

3 Press <1/3 ENTER> or [1/3].

Playback starts in the programmed order.

Repeat off (indicator turns off) Normal playback resumes.
/&5803,
$%
3&$&*7&3

3$%/

Playing random order (Random playback)
In the stop mode, press [RANDOM].

1
2 Press <1/3 ENTER> or [1/3].
The “

” is displayed.

The tracks start playing in random order.

[8]

[1/3]
[9]

If [REPEAT] is pressed during random playback, after the current
session of random playback is finished, another session in a different
order of tracks starts.

NOTE

[MODE]
u
o

[ENTER]
p

Random play cannot be set or canceled during playback.

n Canceling random playback
While stopped, press [RANDOM].
The “ ” turns off.

n Checking the order of the programmed tracks
In the stop mode, press [9].
The track numbers are displayed in the programmed order each
time the button is pressed.

n To clear the last track programmed
In the stop mode, press [CLEAR].
The last track programmed is cleared each time the button is pressed.

n To clear one programmed track at a time
In the stop mode, press [9] to select the track to be cleared,
then press [CLEAR].

n Clearing the all programmed track
In the stop mode, press [PROGRAM].

• If [REPEAT] is pressed during program playback, the tracks are
played repeatedly in the programmed order.
• If [RANDOM] is pressed during program playback, the programmed
tracks are played in random order.
• The program is cleared when the disc tray is opened or the power
is turned off.

i

[NUMBER]

[PROGRAM]
[RANDOM]

[CLEAR]
[DISPLAY]
[REPEAT]

14

1.RCDN7E3_ENG_008.indd 14

2010/09/03 11:11:42

ENGLISH

“Windows Media” and “Windows” are registered trademarks or
trademarks in the United States and other countries of Microsoft
Corporation of the United States.

1

Use o p to select the file, then press [ENTER] or <1/3 ENTER>.
Also use [8, 9] to select the file, or use [NUMBER] (0 – 9, +10)
to select the file number.
• The folder and file numbers are set automatically when the disc is
loaded.
• Copyright-protected files cannot be played.
• Depending on the application software used for writing, it may not
be possible to write the data properly.
• Depending on the disc’s recording conditions, it may not be possible
to play some discs properly.

n Switching the display

Load a CD-R or CD-RW disc containing music
files in the MP3 or WMA format into the disc tray
(vpage 3).

During playback, press [DISPLAY].
Artist name

Disc

All the files in the selected folder are played.
After the selected folder and files are played, all
the files in all the folders are played.

Single-track repeat

All-track repeat
Repeat off
(turns off)

[Selectable items]
When “Folder” is selected:
Only the selected track is played repeatedly.

Folder playback resumes.
When “Disc” is selected:
“Playing repeatedly (Repeat playback)” (vpage 14)

n Setting random playback
“Playing random order (Random playback)” (vpage 14)

Troubleshooting

Programmed playback is not possible with MP3/WMA discs.

Specifications

3 Use ui to select the folder to be played.
[8, 9] or o p to select the file to be
4 Use
played.
5 Press [1/3], [ENTER] or <1/3 ENTER>.

When “Disc” is selected:

Explanation terms

Folder

Album name
” is displayed.
” turns off.

Repeat off

Information

Disc

GAbout the displayH
When “Folder” is selected ..............“
When “Disc” is selected .................“

Repeat of all the tracks
in the folder

All the files in the selected folder are played repeatedly.

2 Press [MODE] and select “Folder” or “Disc”.
Folder

Single-track repeat

Advanced Operations

Playing files

File

Advanced Connections

There are many music distribution sites on the Internet allowing you
to download music files in MP3 or WMA (Windows Media® Audio)
format. The music (files) downloaded from such sites can be stored
on CD-R or CD-RW discs and played on this unit.

Use ui to select the folder, then press [ENTER] or <1/3 ENTER>.

Press [REPEAT].
Playback starts in the respective repeat mode.
• The selectable repeat modes differ in the “Folder” and the
“Disc”.
When “Folder” is selected:

Basic Operations

Portable audio player playback (vpage 25)
USB memory device playback (vpage 18)
iPod® playback (vpage 17)
MP3 and WMA formats (vpage 43)

Folder

n To play repeatedly

Connections

n
n
n
n

n To switch the folder or file during playback

Getting Started

MP3 and WMA files playback
This section explains how to playback MP3 and WMA files
that are recorded onto a CD-R or CD-RW. For details on how to
playback files recorded onto media other than CD-R or CD-RW,
see the following sections.

Index

15

1.RCDN7E3_ENG_008.indd 15

2010/09/03 11:11:42

ENGLISH

Tuner playback

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control

BUTTON

[BUTTON]

Button only on the main unit
Button only on the remote control

<1/3 ENTER> o u



pi

Tuning in Broadcast Stations
Connect the antenna beforehand (vpage 7).

1

Press [TUNER] to select the reception band.
AM

FM

2 Tune in the desired broadcast station. (FM/AM only)
When a station is received, the “

/&5803,
$%
3&$&*7&3

3$%/

” will light.

q To tune in automatically (Auto tuning)
Press [MODE] to light the “AUTO” indicator on the display, then
use [TU d, TU f] to select the station you want to hear.
w To tune in manually (Manual tuning)
Press [MODE] to turn off the display’s “AUTO” indicator, then use
[TU d, TU f] to select the station you want to hear.

Automatically presetting FM stations
(Auto preset)
This unit can be preset with a total of 99, FM and AM broadcast
stations.

NOTE
Auto preset is not possible with AM broadcast stations.

n Auto presetting with the remote control
Perform this operation when tuned to an FM broadcast station.

1 Press [SEARCH].
ui to select “Auto Preset” – “Start”, then
2 Use
press [ENTER], <1/3 ENTER> or p.
“Search” menu appears.

After “Searching“ is displayed, “Complete“ is displayed.

ON/STANDBY
ON/STANDBY

[TUNER]
[TUf]

[TUd]
[2]

[CHANNEL +-]
[MODE]
u
o
i
[SEARCH]

[ENTER]
p

• If the input source is set to something other than “TUNER”, press
[TUNER] to switch the input source to “TUNER”.
• The input source can also be switched to “FM” or “AM” using
 (vpage 12).
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold [TU d, TU f] to
change frequencies continuously.
• A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far
from the TV as possible.

n To stop auto tuning
Press [TU d, TU f].

Canceling auto presetting
Press [2].

Broadcast stations whose antenna signal are weak cannot be preset
automatically. If you wish to preset such stations, tune them in
manually.

NOTE
When the auto presetting operation is performed, the new presettings
overwrite the previous presettings.

n Giving station names to preset channels
Names of up to 8 characters can be input.

1 Tune in the preset channel you want to name.
2 Press and hold [ENTER] or <1/3 ENTER>.
3 Input the station name.
4 Press [ENTER] or <1/3 ENTER>.

The display switches to the station name input display.

[NUMBER]

“Inputting characters” (vpage 36)

The characters you have input are entered.
• To give names to other stations, repeat steps 1 to 4.

16

1.RCDN7E3_ENG_008.indd 16

2010/09/03 11:11:43

ENGLISH

Presetting FM/AM stations manually

Press [ENTER/] or <1/3 ENTER>.

1
ui to select “Call Preset”, then press [ENTER],
2 Use
<1/3 ENTER> or p.
“Preset” menu appears.

With this unit, you can listen to music on an iPod. It is also possible to
operate the iPod from the main unit or remote control.
For the supported iPod models, see “Connecting an iPod” (vpage 9).

n iPod® (vpage 43)

The Preset list appears.

“Preset” menu appears.

The reception frequency and reception mode are preset and the
display switches to the station name input display.

“Preset” menu appears.

NOTE

This function is activated around 1 or 2 minutes after the power is
turned on.

The characters you have input are entered.
• To give names to other stations, repeat steps 1 to 5.

Listening to preset stations

the prompt “Delete?” appears, press [ENTER]
4 When
or <1/3 ENTER>.
• To cancel the operation, press o.

1 Press [MODE] to select the display mode.

The mode switches each time the button is pressed.

• There are two modes for displaying the contents recorded on the
iPod.
Browse mode Display iPod information on the display of this unit.
Remote mode Display iPod information on the iPod screen.
• “Remote iPod” is displayed on the display of this unit.
Display mode
Display location
Audio file
Video file

Active
buttons

Remote control
and main unit
iPod®

Remote mode

Main unit display

iPod display

3

3
3

3

3

Troubleshooting

Playable
files

Browse mode

Explanation terms

Use [NUMBER] (0 – 9, +10) or [CHANNEL + –] to select
the preset number.

3

Use ui to select Preset List, then press [ENTER],
<1/3 ENTER> or p.

Information

6 Press [ENTER] or <1/3 ENTER>.

The Preset list appears.

Advanced Operations

“Inputting characters” (vpage 36)
• If you do not want to input a station name, press [ENTER] or
<1/3 ENTER> without inputting anything else.
• If you make a mistake when inputting, perform the procedure
again. Whatever was previously input is overwritten.

Advanced Connections

When the iPod is loaded to the iPod dock on this unit, the
input source automatically switches to “iPod” and file playback
begins.

Basic Operations

1 Tune in the station you want to preset.
Before playing an iPod
Press [ENTER] or <1/3 ENTER>.
Press ON/STANDBY.
2
1
Use ui to select Preset List, then press [ENTER],
ui to select “Add to Preset”, then press
3 <1/3 ENTER> or p.
3 Use
[ENTER], <1/3 ENTER> or p.
2 Load the iPod onto the iPod dock of this unit.
ui to select the number to be preset, then press Deleting stations registered in Preset List
4 Use
[ENTER] or <1/3 ENTER>.
1 Press [ENTER] or <1/3 ENTER>.
ui to select “Delete Preset”, then press
5 Input the station name.
2 Use
[ENTER], <1/3 ENTER> or p.
Playing an iPod

Connections

This unit can be preset with a total of 99 FM and AM broadcast
stations.

Calling stations registered in Preset List

iPod® playback

Getting Started

Tuner playback

3

• The default display mode setting is “Browse mode”.

Index

Playback starts.

Specifications

ui to select the item, then press [ENTER] or
2 Use
<1/3 ENTER> to select the music file to be played.
3 Press [1/3] or <1/3 ENTER>.

17

1.RCDN7E3_ENG_008.indd 17

2010/09/03 11:11:43

ENGLISH
iPod® playback

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control

BUTTON

[BUTTON]

Button only on the main unit
Button only on the remote control



<1/3 ENTER> o u

pi

/&5803,
$%
3&$&*7&3

3$%/

ON/STANDBY
ON/STANDBY

[8]
[6]

[INTERNET RADIO]
[USB]
[1/3]
[9]
[7]
[2]

NOTE

USB memory device playback
Playing back music or files recorded on a USB memory device or an
iPod.

• iPod nano 1G and iPod video do not have remote mode support.
• DENON will accept no responsibility whatsoever for any loss of iPod
data.
• Depending on the type of iPod and the software version, some
functions may not operate.

n USB memory device (vpage 44)
n Playing an iPod (vpage 17)

n Remote control and iPod button relations

Before playing a USB memory device or an
iPod

Remote control
buttons

iPod buttons

1/3

13

8, 9

8, 9

Play the track from the beginning/Play the
next track.

6, 7
Press and hold

8, 9
Press and hold

Fast-reverse the track/Fast-forward the
track.

u, i
ENTER or p

Click Wheel

MODE

–

REPEAT
RANDOM

–

o

MENU

2
HOME

–

Stop the track.

–

Return to top menu (in Browse mode)

Operation on this unit
Play the track / Pause the track.

Select

Select an item.

1 Press ON/STANDBY.
USB memory device or iPod connection
2 Connect
cable.
 and ui to select to “ ” , then
3 Press
press [ENTER], <1/3 ENTER> or p, or press [USB].

Enter the selection or plays the track.
Switch between the browse mode and
the remote mode.
Switch the repeat function

–

Switch the shuffle function
Display the menu or return to the previous
menu.

n To switch the display
During playback, press [DISPLAY].
The display switches each time the button is pressed.

NOTE
This function is activated around 1 or 2 minutes after the power is
turned on.

Playing files stored on USB memory
devices
Press ui to select the search item or folder, then
1 press
[ENTER], <1/3 ENTER> or p.
ui to select the file, then press [ENTER],
2 Press
<1/3 ENTER>, p or [1/3].
Playback starts.

[MODE]
u
o
i
[SEARCH]

[ENTER]
p

Artist name

Album name

[HOME]

Disconnecting the iPod

[RANDOM]

[DISPLAY]
[REPEAT]

• If the USB memory device is divided into multiple partitions, only the
top partition can be selected.
• This unit is compatible with MP3 files conforming to “MPEG-1 Audio
Layer-3” standards.

1 Press ON/STANDBY to set the standby mode.
2 Remove the iPod from the iPod dock of this unit.

18

1.RCDN7E3_ENG_008.indd 18

2010/09/03 11:11:44

ENGLISH

NOTE

Play the track from the beginning/Play the next track.
Select an item.
Enter the selection or plays the track.
Switch the repeat function
Display the menu or return to the previous menu.
Stop the track.
Character searchz
Return to top menu

• Playing repeatedly (Repeat playback) (vpage 14)

n To switch the display
During playback, press [DISPLAY].

File type/Bitrate

The station list is displayed.

• For character input, see page 36.

Playback starts once buffering reaches “100%”.

• There are many Internet radio stations on the Internet, and the
quality of the programs they broadcast as well as the bit rate of the
tracks varies widely.
Generally, the higher the bit rate, the higher the sound quality, but
depending on the communication lines and server traffic, the music
or audio signals being streamed may be interrupted. Inversely, lower
bit rates mean a lower sound quality but less tendency for the sound
to be interrupted.
• “Server Full” or “Connection Down” is displayed if the station is
busy or not broadcasting.
• On this unit, folder and file names can be displayed as titles. Any
characters that cannot be displayed are replaced with “.” (period).
• When [DISPLAY] is pressed, the display can be switched between
the file type/bitrate and radio station name.

n Registering internet radio stations as your
favorites
You can register your favorite broadcast stations in Favorite List.
(vpage 26)

Specifications

Album name

2 Press [INTERNET RADIO].
n Searching stations by keyword
Press ui to select the item you want to play, then
(Alphabetic strings)
3 press [ENTER], <1/3 ENTER> or p.
Press ui to select “Search by Keyword”, then press
Repeat step 3 until the station list is displayed.
1
<1/3 ENTER> or p.
4
ui to select the station, then press [ENTER],
the characters, then press [ENTER] or <1/3
5 Press
<1/3 ENTER> or p.
2 Input
ENTER>.

Troubleshooting

Artist name

ui to select “Recently Played”, then press
1 Press
[ENTER], <1/3 ENTER> or p.
ui to select the item you want to play, then
2 Press
press [ENTER], <1/3 ENTER> or p.

Explanation terms

If the list is not in alphabetical order, you may not be able to
perform a character search.

q Check the network environment, then turn on this unit’s
power (vpage 11 “Turning the power on”).
w If settings are required, make the “Setting the network
[Network]” (vpage 30).

Recently played internet radio stations can be selected from
“Recently Played”.
Up to 20 stations stored in “Recently Played”.

Information

z Press [SEARCH], then press o p to select the first letter you want
to search mode.

1 Prepare for playback.

n Recently played internet radio stations

Advanced Operations

1/3
8, 9
u, i
ENTER or p
REPEAT
o
2
SEARCH
HOME

Operation on this unit
Play the track / Pause the track.

Listening to internet radio

1 Press [DISPLAY] during Internet radio reception.
broadcast station information and signal format
2 The
bit rate are displayed.

Advanced Connections

Operation buttons

About the internet radio function (vpage 45)
Music server (vpage 45)
About Napster (vpage 45)
About Pandora (vpage 45)
About Rhapsody (vpage 45)

Basic Operations

n USB operation

n
n
n
n
n

n Switching the display

Connections

• Note that DENON will accept no responsibility whatsoever for any
problems arising with the data on a USB memory device when using
this unit in conjunction with the USB memory device.
• USB memory devices will not work via a USB hub.
• DENON does not guarantee that all USB memory devices will
operate or be supplied power. When using a USB portable hard disk
that can draw power from an AC adapter, we recommend using the
AC adapter.
• It is not possible to connect and use a computer via the USB port of
this unit using a USB cable.

Network audio playback
Follow this procedure to play Internet radio stations or music files
stored on a computer.

Getting Started

USB memory device playback

Index

19

1.RCDN7E3_ENG_008.indd 19

2010/09/03 11:11:45

ENGLISH
Playing a network audio

n Internet radio operation

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control

BUTTON

[BUTTON]

Button only on the main unit
Button only on the remote control

<1/3 ENTER>

ou

pi

Operation buttons
MENU
uio p
ENTER
SEARCH
HOME
2
FAVORITE

Function
Menu
Cursor operation
Enter
Character searchz
Return to top page
Stop
Register or call your favorite broadcast station in
Favorite List, and delete the station from the list.

z Press [SEARCH], then press o p to select the first letter you want
to search mode.

If the list is not in alphabetical order, you may not be able to perform
a character search.
/&5803,
$%
3&$&*7&3

3$%/

Playing files stored on a music server
Use this procedure to play music files or playlists.

[FAVORITE]
[ONLINE MUSIC]
[8]

[MUSIC SERVER]
[1/3]
[9]

[2]

[MENU]
u
o
i
[SEARCH]

[ENTER]
p
[HOME]

1 Prepare for playback.

q Check the network environment, then turn on this unit’s
power (vpage 11 “Turning the power on”).
w If settings are required, make the “Setting the network
[Network]” (vpage 30).
e Prepare the computer (vpage 45 “Music server”).

2 Press [MUSIC SERVER].
ui to select the server including the file to
3 Press
be played, then press [ENTER], <1/3 ENTER> or p.
Press ui to select the search item or folder, then
4 press
[ENTER], <1/3 ENTER> or p.
5 Repeat step 4 until the file is displayed.
ui to select the file, then press [ENTER],
6 Press
<1/3 ENTER> or p.

• Connections to the required system and specific settings must be
made in order to play music files (vpage 8).
• Before starting, you must launch the computer’s server software
and set the files as server contents. For details, see the operating
instructions of your server software.
• The order in which the tracks/files are displayed depends on
the server specifications. If the tracks/ files are not displayed in
alphabetical order due to the server specifications, searching by the
first letter may not work properly.
• WMA Lossless files can be played when using a server supporting
transcoding, such as Windows Media Player Ver. 11.
• Use [DISPLAY] to switch between displaying the artist name, file
type/bitrate or album name.

n Playing files that have been registered in your
favorites
Files can be preset, registered in your favorites and played using
the same operations as for Internet radio stations (vpage 26).

NOTE
• When the operations described below is performed, the music
server’s database is updated and it may no longer be possible to
play preset or favorite music files.
• When you quit the music server and then restart it.
• When music files are deleted or added on the music server.
• When using an ESCIENT server, place “ESCIENT” before the server
name.
• You cannot perform the preset registration.

Playback starts once buffering reaches “100%”.

[DISPLAY]

20

1.RCDN7E3_ENG_008.indd 20

2010/09/03 11:11:45

ENGLISH

n Music server operation

Register or call your favorite file in Favorite List, and
delete file from the list.

• Playing repeatedly (Repeat playback) (vpage 14)
• Playing random order (Random playback) (vpage 14)
z Press [SEARCH], then press o p to select the first letter you want
to search mode.

1

Prepare for playback.
q Check the network environment, then turn on this unit’s
power (vpage 11 “Turning the power on”).
w If settings are required, make the “Setting the network
[Network]” (vpage 30).

The search display appears.
• For character input, see page 36.

the characters, then press [ENTER] or <1/3
3 Input
ENTER>.

n Registering tracks in my Napster library
2 Press [ONLINE MUSIC] and select “Napster”.
Press p while the track you wish to register is playing.
Use ui p to input “Username” and “Password”.
1
3
Press [ENTER], <1/3 ENTER> or p.
2
inputting the “Username” and “Password”,
4 After
select “login”, then press [ENTER] or <1/3 ENTER>.
“Add to my library?” appears.

• For character input, see page 36.

The track is entered in the Library.
When you press o, the registration is cancelled and the display
returns to the previous page.

If the “Username” and “Password” match, the top menu for
Napster is displayed.

NOTE
• The password should be no longer than 99 characters.
• Press [HOME] to cancel the input.

• You can search by artist name, album name or track name in menu
list.
• You cannot perform search on the playback screen.

Operation buttons
MENU
uio p
ENTER
SEARCH
HOME
1/3
8 9
2

Function
Menu
Cursor operation / Auto search (cue, ui)
Enter
Search menu
Return to top page
Playback
Auto search (cue)
Stop

Specifications

1 Press [SEARCH].

n Napster operation

Troubleshooting

n Entering a character search for the track you
want to listen to

Use [DISPLAY] to switch between displaying the artist name, file
type/bitrate or album name.

Explanation terms

ui to select search item or folder, then press
1 Use
[ENTER], <1/3 ENTER> or p.
2 Repeat step 1 until the track is displayed.
ui to select the track item, then press [ENTER],
3 Use
<1/3 ENTER> or p.

ui to select “My Napster Library”, then press
1 Use
[ENTER], <1/3 ENTER> or p.
Use ui to select the information or track, then
2 press
[ENTER], <1/3 ENTER>.

Information

n Searching from Napster menu

Listening to tracks registered in my Napster library

Advanced Operations

If the list is not in alphabetical order, you may not be able to
perform a character search.

Napster is not available in all countries.

ui to select the search item, then press
2 Use
[ENTER], <1/3 ENTER>.

Advanced Connections

FAVORITE

Listening to Napster

Basic Operations

Function
Menu
Cursor operation / Auto search (cue, ui)
Enter
Character searchz
Return to top page
Playback / Pause
Auto search (cue)
Stop

Connections

Operation buttons
MENU
uio p
ENTER
SEARCH
HOME
1/3
8 9
2

Getting Started

Playing a network audio

Index

• Playing repeatedly (Repeat playback) (vpage 14)
• Playing random order (Random playback) (vpage 14)

21

1.RCDN7E3_ENG_008.indd 21

2010/09/03 11:11:46

ENGLISH
Playing a network audio

Listening to Pandora

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
Button only on the main unit
Button only on the remote control

BUTTON

[BUTTON]

<1/3 ENTER> o u

1

Prepare for playback.

2

Press [ONLINE MUSIC], then select “Pandora”.

q Check the network environment, then turn on this unit’s
power (vpage 11 “Turning the power on”).
w If settings are required, make the “Setting the network
[Network]” (vpage 30).

• If you do not have a Pandora account, press i to select “I am new
to Pandora”, then press [ENTER], <1/3 ENTER> or p.
The URL needed to activate Pandora and the activation code will
be displayed.
Browse to the Pandora activation URL from your PC and follow the
on-screen instructions for creating a new account.

have a Pandora account, press ui to select
3 If“I you
have a Pandora account”, then press [ENTER],

<1/3 ENTER> or p.

4 Input “Email address” and “Password”.
• For character input, see page 36.

[ONLINE MUSIC]
[1/3]
[9]
[2]

You can create up to 100 personalized radio stations.

Pandora is not available in all countries.

pi

/&5803,
$%
3&$&*7&3

3$%/

n Creating a Personalized radio station

5

After inputting the “Email address” and “Password”,
select “login”, then press [ENTER], <1/3 ENTER> or
p.

ui to select “New Station”, then press [ENTER],
1 Use
<1/3 ENTER> or p.
a “Track Name” or “Artist Name”, then press
2 Input
[ENTER], <1/3 ENTER> or p.
• For character input, see page 36.

Use ui to select “Search by artist” or “Search by
3 track”,
then press [ENTER], <1/3 ENTER> or p.
You can search and display a list by track or artist.

ui, select a file (e.g. D&M2) from the list,
4 Press
and press [ENTER], <1/3 ENTER> or p.
Selected file is played back.
“Radio” is added to the end of a filename, and your original
radio station is created (e.g. D&M2 Radio)

n Listening to a personalized radio station
Listening to a personalized radio station (e.g. D&M2
Radio)
By specifying your favorite track or artist name, Pandora will create a
radio station that plays similar music to your favorite.
• Use [DISPLAY] to switch between displaying the artist name, album
name, station name or file type/bitrate.

If the “Email address” and “Password” match, the top menu for
Pandora is displayed.

NOTE

[MENU]
u
o
i

[ENTER]
p

• Press [HOME] to cancel the input.

[HOME]

[DISPLAY]

22

1.RCDN7E3_ENG_008.indd 22

2010/09/03 11:11:46

ENGLISH

Listening to created radio stations at random

Getting Started

Playing a network audio

n Sign out
Disassociate this unit from your Pandora account.

2

Use to select “Quick Mix”, then press [ENTER],
<1/3 ENTER> or p.

n Providing feedback on tracks within radio
stations
You can provide feedback on track tracks by opening the Pandora
menu screen while a track is playing.

n Pandora operation
Operation buttons
MENU
uio p
ENTER
HOME
13
9
2

Function
System menu
Auto search (cue,i)
Enter
Return to Pandora’s root
Play / Pause
Auto search (cue)
Stop

Advanced Connections

Created radio stations are selected at random, and tracks are
streamed.

Basic Operations

In Pandora, you can search for the track name or artist name
using “D&M2” as a keyword.
When the search is complete, tracks that have a similar rhythm
or sound are streamed.

1 While the Pandora top menu is displayed, press o.
the popup menu appears, press ui to select
2 When
“Yes”.

Connections

1

Press ui and select the radio station (“D&M2
Radio”) that you want to listen to, and press
[ENTER], <1/3 ENTER> or p.

Advanced Operations

Press p while a track is playing.
The Pandora menu is displayed.
I like this track

Bookmark this
track

Troubleshooting

Delete this
station

Explanation terms

Create station

Information

I don’t like this
track

• Press when you like the track that is being played.
(Thumbs
• It will return to the Play Screen. And
up) icon is displayed.
• Press when you don’t like the track that is being
played.
(Thumbs
• It will return to the Play Screen,
down icon) is displayed and Pandora will skip to
the next track.
• Creates a Station for the Track or Artist being
played.
• Bookmarks the track currently being played.
• You can check view your bookmarks at Pandora.
com.
• For details, see the Pandora FAQ at http://blog.
pandora.com/faq/.
• Press when you want to delete the station that is
being played.

Specifications

NOTE
• You can Skip up to 6 Tracks that are being played back within 1 hour.
• You can create up to 100 New Stations (radio stations).

Index

23

1.RCDN7E3_ENG_008.indd 23

2010/09/03 11:11:47

ENGLISH
Playing a network audio

Listening to Rhapsody

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
Button only on the main unit
Button only on the remote control

BUTTON

[BUTTON]

<1/3 ENTER> o u

pi

Rhapsody is not available in all countries.

1 Prepare for playback.

q Check the network environment, then turn on this unit’s
power (vpage 11 “Turning the power on”).
w If settings are required, make the “Setting the network
[Network]” (vpage 30).

Press [ONLINE MUSIC], then select “Rhapsody”.

w Enter a character search for the track you want
to listen to
ui to select “Search”, then press [ENTER],
1 Use
<1/3 ENTER> or p.
ui to select the search item, then press [ENTER],
2 Use
<1/3 ENTER> or p.
The search display appears.

2
the characters, then press [ENTER] or <1/3
ui to select “Sign in to your account”, then
3 Enter
ENTER>.
3 Use
press [ENTER], <1/3 ENTER> or p.
e Search from the Rhapsody internet radio station
4 Input Username and Password.
Use ui to select “Rhapsody Channels”, then press
1
[ENTER], <1/3 ENTER> or p.
After inputting the “Username” and “Password”,
5 select “OK”, then press [ENTER] or <1/3 ENTER>.
2 Repeat step 1 until the radio station is displayed.
ui to select radio station, then press [ENTER],
3 Use
<1/3 ENTER> or p.

• You can search by artist name, album name, track name or keyword.

• For character input, see page 36.
NETWORK CD RECEIVER

<

>

RCD-N7

If the “Username” and “Password” match, the top menu for
Rhapsody is displayed.

NOTE

[ONLINE MUSIC]
[8]

[AUX]
[1/3]
[9]

[2]

[MENU]
u
o
i
[SEARCH]

• The password should be no longer than 99 characters.
• Press [HOME] to cancel the input.

n Select the search mode
q Search from Rhapsody latest information

[ENTER]
p
[HOME]

[DISPLAY]

ui to select “Rhapsody Music Guide”, then
1 Use
press [ENTER], <1/3 ENTER> or p.
ui to select the information for track
2 Press
selection, then press [ENTER], <1/3 ENTER> or p.
• For character input, see page 36.

The search display appears.

r Listening to tracks registered in my library
ui to select “My Library”, then press [ENTER],
1 Use
<1/3 ENTER> or p.
2 Repeat step 1 until the track is displayed.
ui to select the information or track, then
3 Use
press [ENTER], <1/3 ENTER> or p.
After selecting, the information is displayed

3 Repeat step 2 until the track is displayed.
ui to select the track, then press [ENTER],
4 Use
<1/3 ENTER> or p.

24

1.RCDN7E3_ENG_008.indd 24

2010/09/03 11:11:47

ENGLISH

n Track menu

n Rhapsody operation

q Search from the similar music

w Registering tracks in my library

• Playing repeatedly (Repeat playback) (vpage 14)
• Playing random order (Random playback) (vpage 14)

The track is entered in the library.

z

e Rating function

> (vpage 10

The input source automatically switches to “Portable In”.

2 Play the portable audio player.

The player’s audio is output.
• Also read the portable audio player’s operating instructions.

NOTE
When using the portable player’s headphone jack, set the volume on
the portable player to an appropriate level.

Listening to AUX

1 Prepare for playback.
[AUX] to select
2 Press
“AUX2” or “AUX3”.

Check the connection, then turn on this units.

“Portable In”, “AUX1”,

AUX1

AUX2

Portable IN

AUX3 (OPT)

Information

• Use [DISPLAY] to switch between displaying the artist name, file
type/bitrate or album name.

If the list is not in alphabetical order, you may not be able to
perform a character search.

the portable audio player to <
1 Connect
“Connecting a portable player”).

Advanced Operations

ui to select “Rating”, then press [ENTER],
1 Use
<1/3 ENTER> or p.
o p to select the rating, then press [ENTER] or
2 Use
<1/3 ENTER>.

Press [SEARCH], then press o p to select the first letter you
want to search mode.
• If it is not possible to search the list, “unsorted list.” is displayed.
To cancel, press ui or [SEARCH].

Playing portable audio player

Advanced Connections

Use ui to select “Add Track to my library”, then press
[ENTER], <1/3 ENTER> or p.

Your portable audio player can be connected to this unit’s portable jack
to play tracks on the portable audio player.

Basic Operations

Use ui to select the search item, then press [ENTER],
<1/3 ENTER> or p.

Function
Menu
Cursor operation / Auto search (cue, ui)
Enter
Character searchz
Return to top page
Playback / Pause
Auto search (cue)
Stop

Connections

Operation buttons
MENU
uio p
ENTER
SEARCH
HOME
1/3
8 9
2

Press p during playback to display the track menu.

Portable audio player playback

Getting Started

Playing a network audio

Troubleshooting

3 Play the component connected to this unit.

Explanation terms

• When there is no portable audio player connected to the
portable in jack, “Portable In” is not displayed when you press
[AUX].

Specifications
Index

25

1.RCDN7E3_ENG_008.indd 25

2010/09/03 11:11:47

ENGLISH

Favorite function

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
Button only on the main unit
Button only on the remote control

BUTTON

[BUTTON]

<1/3 ENTER> o u

NETWORK CD RECEIVER

pi

RCD-N7

This section provides information on the Favorite function.
• The Favorite function allows you to register your favorite broadcast
stations and files in Favorite List in advance so that you can call and
listen to the stations or files right away, whenever you want.
• The contents that you can register and call are Internet radio station,
music server, and tuner.
• You can register up to 50 items in Favorite List.
• When you attempt to register the 51st station in Favorite List, the
last station (station that is accessed least frequently) is automatically
deleted.
• When you select a station from Favorite List, the top of the list is
displayed.

Registering Internet radio stations, music
servers and tuners in Favorite List
[FAVORITE] while the Internet radio station,
1 Press
tuners or file to register is played back.

Deleting Internet radio stations, files
registered or tuners in Favorite List

1 Press [FAVORITE].
ui to select “Delete Favorite”, then press
2 Use
[ENTER], <1/3 ENTER> or p.
“Favorite” menu appears.

The Favorite list appears.

ui to select Favorite List, then press [ENTER],
3 Use
<1/3 ENTER> or p.
the prompt “Delete?” appears, press [ENTER]
4 orWhen
<1/3 ENTER>.
• To cancel the operation, press o.

“Favorite” menu appears.

[FAVORITE]

ui to select “Add to Favorite”, then press
2 Use
[ENTER], <1/3 ENTER> or p.
When the station, server, or tuner is registered, “Add to
Favorite” appears.

Calling Internet radio stations, files
registered or tuners in Favorite List
u
o
i

[ENTER]
p

1 Press [FAVORITE].
ui to select “Call Favorite”, then press
2 Use
[ENTER], <1/3 ENTER> or p.
“Favorite” menu appears.

The Favorite list appears.

ui to select Favorite List, then press [ENTER],
3 Use
<1/3 ENTER> or p.
The respective function starts up and playback starts.

26

1.RCDN7E3_ENG_008.indd 26

2010/09/03 11:11:48

ENGLISH
Getting Started

Advanced operations
Menu map
[Timer]

1/3




Everyday

Clock
[Clock]

1/3

Manual Adjust

Network
[Network]

1/9

Network First Setup

Other

Auto Standby
Screen Saver

1/5

Network Info.
Auto Standby
Screen Saver
Speaker Optimize
Firmware Update

Index

[Other]

Network Standby
PC Language
Friendly Name Edit
Network Status

Specifications

Other
Network

Party Mode Function
Party Start Level

Troubleshooting

Party Mode

Explanation terms

DHCP
IP Address
Subnet Mask
Gateway
Wired
Primary DNS
Connection
Secondary DNS
Proxy
Connection
Search Access Point
Wireless WPS
Manual Setting
Napster Account
Pandora Account
Rhapsody Account

Information

Connection

Auto Adjust Time Zone
Summer Time
Adjust Now
Manual Adjust
Network First Setup

Page
28
28
28
28
28
28
11
29
29
29
29
–
30
30
30
30
30
30
30
31
30
31
31
32
21
22
24
33
33
33
–
34
34
34
34
–
35
35
35

Advanced Operations

Auto Adjust

Description
Performs the time setting of Once Timer that is activated at a specified time.
Performs the playback Source (input source) setting of Once Timer to be activated at a specified time.
Performs the playback Volume setting of Once Timer to be activated at a specified time.
Performs the time setting of Everyday Timer that is activated everyday.
Performs the playback Source (input source) setting of Everyday Timer to be activated everyday.
Performs the playback Volume setting of Everyday Timer to be activated everyday.
Automatically performs the clock setting from the time information on the Internet.
Sets your local time zone (for Auto Adjust).
Sets the Summer Time information (for Auto Adjust).
Obtains the current time.
Adjusts the clock manually.
Performs the network settings using a Wizard style window.
Performs the wired connection settings.
Performs the DHCP setting.
Performs the IP address setting.
Performs the subnet mask setting.
Performs the gateway setting.
Performs the primary DNS setting.
Performs the secondary DNS setting.
Performs the proxy setting.
Performs the connection test.
Selects and sets the wireless connections from the access point list.
Sets the wireless connection using WPS.
Sets the wireless connection manually.
Performs the Napster account setting again.
Performs the Pandora account setting again.
Performs the Rhapsody account setting again.
Starts or stops the party mode.
Enable/disable the party mode.
Sets the volume used for the party mode.
Performs other network settings.
Sets the network function on during standby.
Selects the language to be used for displaying the Internet sites.
Edits a name displayed on the Internet.
Displays the statuses of up to 10 DENON products connected to the same network.
Displays various setting values of the network.
Sets the Auto Standby mode to automatically enter standby when no operation is performed.
Activates the screen saver.
Performs the filter setting for optimizing the response of optional speakers if they are connected.
Starts the firmware update.

Basic Operations

Once
Everyday

Once

Detailed items
Set Time (hh:mm)
Source (xxx)
Volume (xx)
Set Time (hh:mm)
Source (xxx)
Volume (xx)

Connections

Setting items
Timer

35

27

1.RCDN7E3_ENG_008.indd 27

2010/09/03 11:11:49

ENGLISH

Setting the timer [Timer]

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control

BUTTON

[BUTTON]

Button only on the main unit
Button only on the remote control

<1/3 ENTER>

ou

pi

This device can playback using the timer playback (everyday timer,
once timer).
• This unit's timer does not support exit time settings for timer
playback.

• Automatically starts playback at the earlier timer start time set for
either of the timers.

ON/STANDBY

[CLOCK]

If the current time is not set, enter timer setting mode to get time
setting mode.

Setting the everyday timer and once timer
ON/STANDBY

• Everyday timer (“Everyday”)
Playback starts at the set times each day.
• Once timer (“Once”)
Playback starts once only at the set times.

1 Press [MENU].

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

[MENU]
u
o
i

[ENTER]
p

Favorite

n Timer operation when the time settings for
timers overlap
When the once timer and everyday timer are both
set (sleep timer is not set)

/&5803,
$%
3&$&*7&3

3$%/

ui to select the input source, then press
7 Use
[ENTER], <1/3 ENTER> or p.

ui to select “Timer”, then press [ENTER],
2 Use
<1/3 ENTER> or p.
Use ui to select the timer mode, and use o p to
3 select
“On” or “Off” then press [ENTER], or <1/3
ENTER>.
Use ui to select “Set Time”, then press [ENTER],
<1/3 ENTER> or p.

4
ui to select “hours” – “minutes” for the timer
5 Use
start time, then press [ENTER], <1/3 ENTER> or
p.

Preset
USB

CD

iPod

ui to select the “Volume”, then press
8 Use
[ENTER], <1/3 ENTER> or p.
ui to select the volume “0 – 60”, then press
9 Use
[ENTER], <1/3 ENTER> or p.
10 Press ON/STANDBY to set the power to standby.
Timer standby mode is set, and the power indicator lights
orange.

NOTE
• If the unit or remote control is not operated for 90 minutes or more
when the timer is set to on, the standby mode is activated.
• When using timer playback on an iPod Touch or iPhone, set the iPod
Touch or iPhone to “Sleep” mode. If the power is switched off using
the power off operation, timer playback cannot be used.
For details on the “Sleep” mode of the iPod Touch or iPhone, see
the instruction manuals of the products or related web pages.

n Setting the timer to on or off
Perform the operations at “Setting the timer [Timer]” (vpage 28).
• When set to “OFF”, time operation is disabled, but the timer
settings remain unchanged.

n To check the timer settings
Perform the operations at “Setting the timer [Timer]” (vpage 28).

n To change the timer settings
Perform the operations at “Setting the timer [Timer]” (vpage 28).

n To change the setting while setting the timer

Press o.
The setting returns to the previous step. Display the setting you
want to change, then make the desired setting.

ui to select “Source”, then press [ENTER],
6 Use
<1/3 ENTER> or p.

28

1.RCDN7E3_ENG_008.indd 28

2010/09/03 11:11:49

ENGLISH

You can automatically adjust the clock of this unit using the Internet.

Auto Adjust
Use the following procedure to automatically adjust the clock.

Setting the Time Zone

1

Press [MENU].

Use ui to select “Clock” – “Auto Adjust” – “Time
2 Zone”,
then press [ENTER], <1/3 ENTER> or p.
“Time Zone” menu appears.

The setting is entered.

Use the following procedure to set Summer time if the Summer time
system is used in your country.

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

ENTER> or p.

“Summer Time” menu appears.

1 Press [MENU].

Turns on the Menu settings mode and the Menu appears on the
display. (vpage 27 “Menu map”)

ui to select “Clock” – “Manual Adjust”, then
2 Use
press [ENTER], <1/3 ENTER> or p.
3 Use ui to set the “hours”.
4 Press [ENTER], <1/3 ENTER> or p.
5 Use ui to set the “minutes”.
6 Press [ENTER], <1/3 ENTER> or p.

Index

Use ui to select “Off (0H)” or “On (+1H)”, then
3 press
[ENTER], <1/3 ENTER> or p.

Setting the current time (Manual Adjust)
(12-Hour Display)

Specifications

Use ui to select “Clock” – “Auto Adjust” –
2 “Summer
Time”, then press [ENTER], <1/3

• The current time is displayed for several seconds when it is received
successfully.
• If the current time is not received successfully, “Connection Failed”
appears.

Troubleshooting

1 Press [MENU].

NOTE
The time cannot be set when in the standby mode. Turn on the power
first.

Explanation terms

Setting the Summer Time

The operation to receive the current time starts.

Press [CLOCK].
The current time is displayed for 30 seconds.

Information

ui to select your time zone, then press
3 Use
[ENTER], <1/3 ENTER> or p.

2

Use ui to select “Clock” – “Auto Adjust” –
“Adjust Now”, then press [ENTER], <1/3 ENTER>
or p.

n Checking the current time when the power is
set to standby

Advanced Operations

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

Basic Operations

Use the following procedure to select your local standard time (time
zone).

1 Press [MENU].

Press [CLOCK].
Press once more and the display returns to its original condition.

Connections

To use this function, the unit must be connected to the Internet.

n Checking the current time when the power is on

Getting Started

Adjusting the clock automatically [Clock]

The current time is set.

The setting is entered.

29

1.RCDN7E3_ENG_008.indd 29

2010/09/03 11:11:50

ENGLISH

Setting the network [Network]

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control

BUTTON

[BUTTON]

Button only on the main unit
Button only on the remote control

<1/3 ENTER>

ou

pi

Connecting Wired LAN
When using this unit with the broadband router’s DHCP function
enabled, this unit automatically performs the IP address setting and
other settings.
When using this unit connected to a network with no DHCP function,
make the settings for the IP address, etc., at “Network connecting
(DHCP=Off)” (vpage 30).

NOTE
When setting manually, check the setting contents with the network
administrator.

n Network connecting

1 Connect the LAN cable.
2 Turn on this unit.
3 Press [MENU].

(vpage 8 “Connecting to a home network (LAN)”)

/&5803,
$%
3&$&*7&3

3$%/

(vpage 11 “Turning the power on”)

n Network connecting (DHCP=Off)
steps 1 to 4 of the “Network connecting”
1 Perform
procedure and select “Off” in step 5.
“Connection” menu appears.

ui to select “IP Address”, then press [ENTER],
2 Use
<1/3 ENTER> or p.
“IP Address” input menu appears.

uip or [NUMBER] (0 – 9) to input the address
3 Use
and press [ENTER] or <1/3 ENTER>.
uip or [NUMBER] (0 – 9) to input the
4 Use
address for Subnet Mask, Gateway, Primary DNS,
and Secondary DNS.
you input all required addresses, perform
5 After
step 6 of “Network connecting” to connect to the
Internet.

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

ui to select “Network” – “Connection” –
4 Use
“DHCP (Off)”, then press [ENTER], <1/3 ENTER>
or p.

“DHCP” menu appears.
• When the network connection is set to “DHCP (On)”, go to step 6.

[MENU]
u
o
i

ui to select “On”, then press [ENTER], <1/3
5 Use
ENTER> or p.
[ENTER]
p

“Connection” menu appears.

ui to select “Connection”, then press [ENTER],
6 Use
<1/3 ENTER> or p.
The connection starts.

[NUMBER]

• When the connection is made successfully, “Succeeded” appears.
If the connection fails, “Failed” appears.

NOTE
You may need to set the network connection manually, depending on
the provider you use. To set the connection manually, use the setting
procedure of “Network connecting (DHCP=Off)”.

30

1.RCDN7E3_ENG_008.indd 30

2010/09/03 11:11:50

ENGLISH

n Proxy Settings
Make this setting when connecting to the Internet wia to proxy
server.
Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

“Proxy” setting menu appears.

ENTER>, or p.

1 Fitting a rod antenna.
2 Turn on this unit.
3 Press [MENU].

If a LAN cable is connected, remove it.

(vpage 11 “Turning the power on”)

Turns on the menu settings mode and the menu appears on
the display. (vpage 27 “Menu map”)

“Proxy” (On/Off) setting menu appears.

4

Use ui to select “On”, then press [ENTER], <1/3
ENTER> or p.
“Proxy” setting menu appears.

“Select Type” setting menu appears.

Use ui to select “Address” or “Name”, then
6 press
[ENTER], <1/3 ENTER> or p.

7

Use ui to select “Address” or “Name”, then press
[ENTER], <1/3 ENTER> or p.
“Address” or “Name” input menu appears.

uip or [NUMBER] (0 – 9) to input the address
8 orUsename,
then press [ENTER] or <1/3 ENTER>.
“Proxy” setting menu appears.

“Port” input menu appears.

Use ui p or [NUMBER] (0 – 9) to input the port,
10 then
press [ENTER] or <1/3 ENTER>.
The Proxy settings are completed.

used for the access point. (If there is no encryption
setting, proceed to step 7.)

Use uio p to input the “Key” (encryption key) and press
[ENTER], <1/3 ENTER> or p. Enter the same encryption key
as used for the access point.
• The types of characters that can be input are as shown below.
GUpper case charactersH
ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH
abcdefghijklmnopqrstuvwxyz
GSymbolsH ! “ # $ % & ‘ ( ) z + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | }
˜
GNumbersH 0123456789 (Space)
• When no security settings have been used in the Internet connection
settings, this step is not necessary.

ENTER> or p.

ui to select “Enter”, then press [ENTER],
3 Use
<1/3 ENTER> or p.
Please push the WPS button of the router, and push the Enter
button of the machine.

connection is established with access point,
4 When
“Succeeded” is displayed.

n WPS Settings (PIN code method)

1 Press [MENU].

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

ui to select “Network” – “Connection” –
2 Use
“WPS” – “PIN code”, then press [ENTER], <1/3
ENTER> or p.

The access point you have set is displayed.

ui to select the access point, then press
3 Use
[ENTER], <1/3 ENTER>, or p.

Index

ui to select “Port”, then press [ENTER], <1/3
9 Use
ENTER> or p.

is an encryption setting for the access point
6 Ifyouthere
selected in step 5, enter same encryption key as

ui to select “Network” – “Connection” –
2 Use
“WPS” – “Push Button”, then press [ENTER], <1/3

Specifications

• Input a server address or domain name.

If the access point is not detected automatically, use the
“Manual Settings” (vpage 32) procedure.

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

Troubleshooting

“Proxy” setting menu appears.

ui to select the access point, and then press
5 Use
[ENTER], <1/3 ENTER> or p.

1 Press [MENU].

Explanation terms

• Seleccione si Proxy es una dirección de servidor o un nombre de
dominio.

The access point you have set is displayed.

n WPS Settings (Push-button method)

Information

5

Use ui to select “Proxy (Address)” or “Proxy
(Name)”, then press [ENTER], <1/3 ENTER> or p.

4

Use ui to select “Network” – “Connection” –
“Search Access Point”, then press [ENTER], <1/3
ENTER> or p.

Network connection starts.
• This unit performs automatic network setup due to the DHCP
function.
• When connecting to a network that has no DHCP function, perform
the setting in Network conntecting (DHCP=Off) (vpage 30).

Advanced Operations

appears, go to step 5.
3 IfIf “Proxy(On)”
“Proxy(Off)” appears, press [ENTER], <1/3

n Search Access Point (Wireless LAN)

i to select “Connection”, then press [ENTER],
7 Use
<1/3 ENTER> or p.

Basic Operations

Use ui to select “Network” – “Connection” –
2 “Proxy”,
then press [ENTER], <1/3 ENTER> or p.

If you cancelled “Network First Setup” or changed the network
environment, perform “Menu” − “Network” − “Network First Setup”.

Connections

1

Press [MENU].

Connecting Wireless LAN

Getting Started

Setting the network [Network]

PIN code number is displayed.

4 Set this PIN code to the register.
When connection is established
“Succeeded” is displayed.

with

access

point,

31

1.RCDN7E3_ENG_008.indd 31

2010/09/03 11:11:51

ENGLISH
Setting the network [Network]

n Manual Settings

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control

BUTTON

[BUTTON]

Button only on the main unit
Button only on the remote control

<1/3 ENTER>

ou

pi

1

Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

ui to select “Network” – “Connection”
2 Use
– “Manual setting”, then press [ENTER], <1/3
ENTER> or p.

ui to select “SSID”, then press [ENTER],
3 Use
<1/3 ENTER> or p.
uio p to input the name of the wireless
4 Use
network (SSID), then press [ENTER] or <1/3

ui to input the “Key” (encryption key), then
7 Use
press [ENTER] or <1/3 ENTER>.
Enter the same encryption key as used for the access point.
• When no security settings have been used in the Internet
connection settings, this step is not necessary.
• When connecting to a “WEP” encrypted network, set the access
point “Default Key” to “1”.

i to select “Connection” and press [ENTER],
8 Use
<1/3 ENTER> or p.
Network connection starts.
• This unit performs automatic network setup due to the DHCP
function.

ENTER>.

• The types of characters that can be input are as shown below.
/&5803,
$%
3&$&*7&3

3$%/

GUpper case charactersH
ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH
abcdefghijklmnopqrstuvwxyz
GSymbolsH ! “ # $ % & ‘ ( ) z + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | }
˜
GNumbersH 0123456789 (Space)

ui to select “Security”, then press [ENTER],
5 Use
<1/3 ENTER> or p.
ui to select following items, then press
6 Use
[ENTER], <1/3 ENTER> or p.
[MENU]
u
o
i

[ENTER]
p

• None : Select if not encrypted. Can also be used even without
encryption, through we recommend encryption for improved
security.
• WEP / WPA(TKIP) / WPA(AES) / WPA2(TKIP) / WPA2(AES) :
Select the encryption method according to the encryption setting
of the access point you are using.

32

1.RCDN7E3_ENG_008.indd 32

2010/09/03 11:11:51

ENGLISH

Canceling the party mode

The same network audio (Internet radio, music server or iPod DIRECT)
can be played on multiple DENON products equipped with the Party
Mode function and connected in a network.
The party mode consists of one organizer and up to four attendees.
When one unit starts the party mode as the organizer, up to four
devices on which the party mode function is activated automatically
participate in the party as attendees. “Party Mode Function” must be
set to “ON” ahead of time in order to use the party mode function.

1 Press [MENU].

1 Press [MENU].

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

ui to select “Network” – “Party Mode” –
ui to select “Network” – “Party Mode” –
2 Use
2 Use
“Stop Party”, then press [ENTER], <1/3 ENTER>
“Stop Party”, then press [ENTER], <1/3 ENTER>

n Setting the Party Mode Function

2

Use ui to select “Network” – “Party Mode” –
“Party Mode Function”, then press [ENTER], <1/3
ENTER> or p.

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

On

: Enable party mode function.

Off

: Disable party mode function.

1 Press [MENU].

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

3 Play the desired station.

ui to select “Yes” or “No”, then press
4 Use
[ENTER], <1/3 ENTER> or p.

In this case, the other devices remain in the party mode.

Yes

: The power of the attendees is turned off and the party
mode is canceled.

“Napster”, “Pandora”, “Rhapsody” and “USB” are not available in
the Party Mode.
There can only be one organizer in the network. To form a new party
mode, first cancel the current party mode.

No

: The party mode is canceled without turning off the power
of the attendees.

n Setting the Party Start Level
Make settings for volume level when the party mode is started.

n Participating in the party mode as an attendee
• When the organizer starts the party mode, up to four attendees
are selected automatically. No operation is required.
• When a device becomes an attendee, Party Mode Attendee appears
on the display. The input source automatically switches to
“Internet Radio” and the same network audio as on the organizer
is played.
• If there are fewer than four attendees, a device can join the
party mode after it has started. To participate in the party mode,
perform the operation described below.

1 Press [MENU].

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

ui to select “Network” – “Party Mode” –
2 Use
“Start Party”, then press [ENTER], <1/3 ENTER>

1 Press [MENU].

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

ui to select “Network” – “Party Mode” –
2 Use
“Party Start Level”, then press [ENTER], <1/3
ENTER> or p.

• Last : The same volume as set before the party mode was started.
• 00 : Always use the muting on condition when the party mode is
started.
• 01 – 60dB : Start party mode with your preferred volume.

This can be set when “Party Mode Function“ is set to “ON“.

Index

• An error message is displayed when you are not connected to a
network.
• The input source automatically switches to “Internet Radio” and
the attendees are automatically selected.

“Attendee P.Off?” is displayed.

Specifications

2

Use ui to select “Network” – “Party Mode” –
“Start Party”, then press [ENTER], <1/3 ENTER>
or p.

ui to select “Yes”, then press [ENTER], <1/3
ui to select “Yes”, then press [ENTER], <1/3
3 Use
3 Use
ENTER> or p
ENTER> or p

Troubleshooting

n Starting the party mode as the organizer

“Exit Party Mode?” is displayed on the menu screen.

Explanation terms

3

Use ui to select “On” or “Off” , then press
[ENTER], <1/3 ENTER> or p.

or p.

“Exit Party Mode?” is displayed on the menu screen.

Information

“P-Mode Function” menu appears.

or p.

Advanced Operations

1

Press [MENU].

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

Basic Operations

Canceling the party mode

Connections

Party Mode Function

Getting Started

Setting the network [Network]

or p.

• An error message is displayed when you are not connected to a
network.

33

1.RCDN7E3_ENG_008.indd 33

2010/09/03 11:11:52

ENGLISH
Setting the network [Network]

Other Network

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control

BUTTON

[BUTTON]

Button only on the main unit
Button only on the remote control

<1/3 ENTER>

u

pi

n Network Standby
Set the network function On/Off during standby.

1

Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

ui to select “Network” – “Other Network”
2 Use
– “Network Standby”, then press [ENTER], <1/3
ENTER> or p.

“Network Standby” menu appears.

ui to “On”, then press [ENTER], <1/3
3 Use
ENTER> or p.
On
/&5803,
$%
3&$&*7&3

3$%/

Off

: Shortens the time before the network connection is
completed.
• Power consumption during the standby mode will be
higher. (Power consumption: 3 W)
• Network standby mode is set and the power indicator
lights red.
: Power consumption during the standby mode will be
minimized. (Power consumption: 0.3 W)
• It will take slightly longer till the network connection is
completed.
• This is the default setting.

n PC Language
Select computer environment language.

1 Press [MENU].

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

ui to select “Network” – “Other Network” –
2 Use
“PC Language”, then press [ENTER], <1/3 ENTER>
or p.

“PC Language” setting menu appears.

Use ui to select your computer environment
3 language,
then press [ENTER], <1/3 ENTER> or p.

n Friendly Name Edit
The Friendly Name is the name of this unit displayed on the
network.

1 Press [MENU].

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

ui to select “Network” – “Other Network” –
2 Use
“Friendly Name Edit”, then press [ENTER], <1/3
ENTER> or p.

“Friendly Name Edit” menu appears.

3 Edit a friendly name.

For the character input method, see “Inputting characters”
(vpage 36)

[MENU]
u
i

[ENTER]
p

n Network Status
Displays up to a maximum of 10 DENON products connected on
the same network.
• Friendly Name / Party Mode Status / Model Name /
Power ON / Standby / Select Source / Volume Level

34

1.RCDN7E3_ENG_008.indd 34

2010/09/03 11:11:52

ENGLISH
Getting Started

Setting the others [Other]
Screen Saver

Firmware Update

With the Auto standby ON, this unit will automatically enter the
standby mode after about 30 continuous minutes of stop mode with
no operation.
• The default setting is “OFF”.

Use the following procedure to set the screen saver.

• In order to use these functions, you must have the correct system
requirements and settings for a broadband Internet connection
(vpage 8).
• Perform the firmware update operation after at least 2 minutes has
elapsed since turning this unit’s power ON.

Turns on the Menu settings mode and the Menu appears on the
display. (vpage 27 “Menu map”)

2
ui to select “On”, then press [ENTER], <1/3
3 Use
ENTER> or p.
The setting is entered.

NOTE

“Screen Saver” menu appears.

Using an optimizing filter
An optimizing filter suited for the properties of the speakers (SC-N7,
sold separately) can be used.

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

ui to select “Other” – “Speaker Optimize”,
2 Use
then press [ENTER], <1/3 ENTER> or p.
“Speaker Optimize” menu appears.

: The response is optimized for the speakers (SC-N7, sold
separately).

OFF

: The response is flat.

Start

: Execute the update process.

• If updating fails, the set automatically retries, but if updating is still
not possible, one of the messages shown below is displayed. If
the display reads as shown below, check the settings and network
environment, then update again.
Display
Updating fail
Login failed
Server is busy
Connection fail
Download fail

Description
Updating failed.
Failure to log into server.
Server is busy. Wait a while then try again.
Failure in connecting to server.
Downloading of the firmware has failed.

[Notes concerning use of “Firmware Update”]

Index

• Do not turn off the power until updating is completed.
• Even with a broadband connection to the Internet, approximately
20 minutes is required for the updating procedure to be completed.
• Once updating starts, normal operations on this unit cannot be
performed until updating is completed.
• Furthermore, updating the firmware may reset the backup data for
the parameters, etc. set for this unit.
• If the update fails, remove and re-insert the power cord. “Update
retry” appears on the display and update restarts from the point at
which update failed. If the error continues despite this, check the
network environment.

Specifications

ON

Check for Update : Check for firmware updates. You can also check
approximately how long it will take to complete
an update.

Troubleshooting

ui to select “ON”, then press [ENTER], <1/3
3 Use
ENTER> or p.

[Selectable items]

Explanation terms

1

Press [MENU].

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

Information

In the following situations, the Auto standby function does not operate.
• During CD playback or pause.
• When an iPod or USB memory device is connected to the USB port
on the unit. When an iPod is connected to the iPod dock on the unit.
• When the input source is “TUNER”, “AUX1”, “AUX2” or “AUX3”.
• When the input source is “Portable In” and a devices connected to
the Portable In jack.
• When the input source is “AUX3” and a signal is input.
• When the input source is “INTERNET RADIO”, “MUSIC SERVER” or
“ONLINE MUSIC”, and a ethernet cable is connected to NETWORK
connector.

Use ui to select “Other” – “Screen Saver”, then
2 press
[ENTER], <1/3 ENTER> or p.
1 Press [MENU].
ui to select “ON”, then press [ENTER], <1/3
ui to select “Other” – “Firmware Update”,
3 Use
ENTER> or p.
2 Use
then press [ENTER], <1/3 ENTER> or p.

Advanced Operations

Use ui to select “Other” – “Auto Standby”, then
press [ENTER], <1/3 ENTER> or p.

Turns on the Menu settings mode and the Menu appears on
the display. (vpage 27 “Menu map”)

Basic Operations

1 Press [MENU].

1

Press [MENU].

Connections

Auto Standby

35

1.RCDN7E3_ENG_008.indd 35

2010/09/03 11:11:52

ENGLISH

Other functions

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control

BUTTON

[BUTTON]

Button only on the main unit
Button only on the remote control

<5>

<1/3 ENTER>

ou

pi

Inputting characters

Using the number buttons

You can change the names as desired using the “Preset Name”
(vpage 16), “Napster Account” (vpage 21), “Pandora account”
(vpage 22), “Rhapsody account” (vpage 24), and character input for
the network functions.
For inputting characters, there are two methods, as shown below.

1 Display the screen for inputting characters.
the cursor at the character to be changed with
2 Place
o p and press [NUMBER] (0 – 9) until the desired

Method

Using the number
buttons

Using the cursor
buttons
/&5803,
$%
3&$&*7&3

3$%/

ON/STANDBY



Operations
• Operating with the remote control unit.
• Multiple characters are assigned to
a button, and each time the button is
pressed, a character is switched.
• Operating with the remote control unit
or the main unit.
• Use uio p and [ENTER] or <1/3
ENTER> to input characters.

n Display of an input screen
GPreset nameH

ON/STANDBY
[iPod]
[TUNER]
[8]

[USB]
[CD]
[1/3]
[9]

P03
Cursor

select
GAccount inputH

u
o
i

1.@-_/:

˜

mnoMNO6

abcABC2

pqrsPQRS7

defDEF3

tuvTUV8

ghiGHI4

wxyzWXYZ9

jklJKL5

0 (Space) ! “ # $ % & ‘ ( ) z + ,
;<=>?[\]^`{|}

• The input character type can be switched by pressing [MODE]
while the display name is being changed.
• For entering the characters assigned to one number button
continuously, press p to move the cursor to the right after entering
a character then enter the next character.
• For entering characters assigned to separate buttons, press the
number button continuously. The cursor automatically moves to
the next position, and the entered character is registered.

step 2 to change the name then press [ENTER]
3 Repeat
or <1/3 ENTER> to register it.

[Username]
select

[MODE]
[ENTER]
p

move

character is displayed.

• The types of characters that can be input are as shown below.

: enter

Example: For changing characters from “POPS” to “ROCK”
q Place the cursor at “P”.

POPS

w Press
seven times.
“P” changes to “R”.

ROPS

e Press p twice.
“R” is automatically registered, and the cursor
placed “P”.

[NUMBER]

r Press
six times.
“P” changes to “C”.
t Press p.
“C” is registered and the cursor placed “S”.

ROPS

ROCS
ROCS

five times.
y Press
ROCK
“S” changes to “K”.
u Press [ENTER] or <1/3 ENTER> to register the input name.

36

1.RCDN7E3_ENG_008.indd 36

2010/09/03 11:11:52

ENGLISH

Using the cursor buttons
Display the screen for inputting characters.

GUpper case charactersH

1 Unplug the power cord.
the power cord into a power outlet while pressing
2 Plug
 and  simultaneously.
“Initialized” is displayed.

If “Initialized” does not display in step 2, start over from step 1.

Explanation terms

n Other buttons
• Press [8] to delete the character.
• Press [9] to insert a space.

Perform this procedure if the display is abnormal or if operations
cannot be performed.
When the microprocessor is reset, all the settings are reset to their
default values.

Information

• The input character type can be switched by pressing [MODE]
while the display name is being changed.

Resetting the microprocessor

Advanced Operations

ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH
abcdefghijklmnopqrstuvwxyz
GSymbolsH ! “ # $ % & ‘ ( ) z + , - . / : ; <
=>?@[\]^_`{|}
GNumbersH 0123456789 (Space) ˜

This stores the settings as they were immediately before going into
the standby mode.
When the power is turned back on, the settings are restored to as
they were immediately before going into the standby mode.

Basic Operations

• The types of characters that can be input are as shown below.

Last function memory

Connections

1
o p to set the cursor to the character you want
2 Use
to change.
3 Use ui to change the character.

Getting Started

Other functions

steps 2 and 3 to change the name then press
4 Repeat
[ENTER] or <1/3 ENTER> to register it.

Troubleshooting

Auto power on

Specifications

When the power is in standby, the power turns on when any of
the buttons below other than ON/STANDBY is operated, and the
respective operation is performed.
• <5> ............... The disc tray opens.
• [1/3] ............ Playback of the “CD”, “iPod” or “USB” starts.
• [TUNER] ........ Playback of the tuner starts.
• [CD] ............... The input source switches to “CD” and the disc starts
playing.
• [iPod] ............ The input source switches to “iPod” and the iPod
starts playing.
• [USB]............. The input source switches to “USB” and the USB
starts playing.

Index

37

1.RCDN7E3_ENG_008.indd 37

2010/09/03 11:11:55

ENGLISH

Information
Part names and functions
For buttons not explained here, see the page indicated in parentheses ( ).

Front panel
Q3

Q2

Q1

Q0

o

i

u

y

y
t
/&5803,
$%
3&$&*7&3

3$%/

q

w

q SOURCE button ······································································· (12)
Selects the input source.

w USB port····················································································· (9)
Used to connect iPod or USB memory devices.

e Portable in jack (

) ·································································· (25)
Used to connect portable audio devices.

r Headphones jack (

) ····························································· (13)
Used to connect headphones.

t Volume up/down button (VOLUME df) ······························ (12)
Adjusts the audio volume.

e

r

u Play/Pause/ENTER button (1/3/ENTER) ····························· (13)
i Disc tray ····················································································· (3)
Tray used to insert a compact disc.

o Display
Displays play status, settings, etc.

Q0 Remote control sensor ····························································· (4)
Q1 Disc tray open/close button (5)············································· (13)
Used to open/close the disc tray.

Q2 Power indicator ······································································· (11)
Q3 Power operation button (ON/STANDBY) ····························· (11)

y Cursor button (uiop) ·························································· (12)

38

1.RCDN7E3_ENG_008.indd 38

2010/09/03 11:11:55

ENGLISH

Top panel

Rear panel
o

i

u

Connections

PUSH OPEN

RCD-N7W

COAX.
75ǡ

NETWORK

y

ETHERNET
FM
AM

AC IN
R

SPEAKERS

L

SUBWOOFER
PREOUT

AUX OUT

AUX IN 1

AUX IN 2

L

R

TUNER
ANTENNA

Connect to the speakers.

q Dock for iPod ················································ (9)
w Dock connector············································· (9)

w

r

t AM antenna terminal ··································· (7)
Connect to the supplied AM antenna.

y FM antenna terminal···································· (7)

Connect to the input terminal of a powered
subwoofer.

Connect the supplied FM antenna. Connect to
an external antenna if reception is poor.

e AUX OUT terminals ····································· (6)

u ETHERNET connector ·································· (8)
i WLAN ANTENNA terminal ·························· (8)
o AC inlet (AC IN)··········································· (10)

Connect to an external pre-main amplifier.

r AUX IN terminals ········································· (6)
Connect to analog/digital audio.

Connect the supplied AC power cord.

Troubleshooting

w SUBWOOFER PRE OUT terminal ················ (5)

Explanation terms

q

e

Information

q Speaker output terminals···························· (5)

w

Advanced Operations

LOOP
ANT.

SPEAKERS INPEDANCE 4-16 ǡ

q

t

AUX IN 3
(OPTICAL)

Basic Operations

WLAN ANTENNA

GWhen the door is openedH

Getting Started

Part names and functions

Specifications
Index

39

1.RCDN7E3_ENG_008.indd 39

2010/09/03 11:11:55

ENGLISH
Part names and functions

Remote control
This section explains the buttons used to playback each input source.

n Buttons that work with all input sources
(CD, TUNER, iPod, USB and NETWORK)
q w

e

n Buttons that work with CDs
The buttons listed at “Buttons that work with all input sources” can also be used.

r

t

q SLEEP button ·············································· (13)
w CLOCK button ············································· (29)
e DIMMER button ·········································· (13)
r ON/STANDBY button ································ (11)
t Input source select button ························ (12)
y MUTE button ·············································· (12)
u Master volume control buttons
(VOLUME) ··················································· (12)

i SDB/TONE button ······································ (12)
o MENU button······································ (28 – 35)

q Play/Pause button (1/3)··························· (13)
w Reverse-skip/Forward-skip buttons
(8, 9) ·················································· (13)

e Fast-reverse/Fast-forward buttons
(6, 7) ··················································· (13)

q
w
e

y

w
e
r

u
i

r Stop button (2) ·········································· (13)
t MODE button ·············································· (15)
y ENTER button ············································· (13)
u Cursor buttons (uio p) ·························· (13)
i Number buttons ········································· (13)
o CLEAR button ············································· (14)
Q0 PROGRAM button ······································ (14)
Q1 RANDOM button ········································ (14)
Q2 DISPLAY button·········································· (13)
Q3 REPEAT button ··········································· (14)

t
y

o
u

i
o
Q0
Q1

Q2
Q3

40

1.RCDN7E3_ENG_008.indd 40

2010/09/03 11:11:56

ENGLISH

n Buttons that work with the tuner

n Buttons that work with iPods or USBs

The buttons listed at “Buttons that work with all input sources” can also be used.

w
e

(6, 7) ···················································· (18)

q
e

w
q
e
r

t
y

y

u

y

i

o

Q0

Q1
Q2

Troubleshooting

i

t
u

Explanation terms

y

Information

r

r Stop button (2) ·········································· (18)
t MODE button ·············································· (17)
y ENTER button ············································· (17)
u Cursor buttons (uio p) ·························· (17)
i SEARCH button ·········································· (19)
o HOME button ·············································· (18)
Q0 RANDOM button ········································ (18)
Q1 DISPLAY button·········································· (18)
Q2 REPEAT button ··········································· (18)

Advanced Operations

w

(8, 9) ·················································· (18)

w Play/Pause button (1/3)··························· (17)
e Fast-reverse/Fast-forward buttons

Basic Operations

q

q Reverse-skip/Forward-skip buttons

Connections

q TUNER button ············································ (16)
w TUNING buttons (TU d, TU f) ·················· (16)
e Stop button (2) ·········································· (16)
r Channel buttons (+, –) ································ (17)
t MODE button ·············································· (16)
y Cursor buttons (ui p) ····························· (16)
u ENTER button ············································· (16)
i SEARCH button ·········································· (16)
o Number buttons ········································· (17)

The buttons listed at “Buttons that work with all input sources” can also be used.

Getting Started

Part names and functions

Specifications

o

Index

41

1.RCDN7E3_ENG_008.indd 41

2010/09/03 11:11:56

ENGLISH
Part names and functions

n Buttons that work with Network
The buttons listed at “Buttons that work with all input sources” can also be used.

q Reverse-skip/Forward-skip buttons
(8, 9) ·················································· (21)

q

w
q

w Play/Pause button (1/3)··························· (21)
e Stop button (2) ·········································· (20)
r ENTER button ············································· (19)
t Cursor buttons (uio p) ·························· (19)
y SEARCH button ·········································· (20)
u HOME button ·············································· (20)
i RANDOM button ········································ (21)
o REPEAT button ··········································· (21)
Q0 DISPLAY button·········································· (19)

e

r
t
y

u

i

Q0
o

42

1.RCDN7E3_ENG_008.indd 42

2010/09/03 11:11:56

ENGLISH
Getting Started

iPod®

MP3 and WMA
MP3 and WMA formats
n Writing software format

n Maximum number of playable files and folders
Total number of folders and files : 512
Number of folders : 256
MPEG-1 Audio Layer-3
WMA (Windows Media Audio)

n Tag data

NOTE

Playable MP3/WMA file
Bit rate

Extension

MP3

32, 44.1, 48 kHz 32 ~ 320 kbps

.mp3

WMA

32, 44.1, 48 kHz 64 ~ 192 kbps

.wma

• DENON will accept no responsibility whatsoever for any loss of iPod
data.
• Depending on the type of iPod and the software version, some
functions may not operate.
• When connecting an iPhone to the USB port of this unit, keep the
iPhone at least 20cm away from this unit. If the iPhone is kept closer
to this unit and a telephone call is received by the iPhone, noise may
be output from this device.

Explanation terms

File format

Sampling
frequency

Information

ID3-Tag (Ver. 1.x and 2.x )
META-Tag
(Compatible with title, artist and album names)

Advanced Operations

n File format

“Made for iPod” and “Made for iPhone” mean that an electronic
accessory has been designed to connect specifically to iPod, or
iPhone, respectively, and has been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod or iPhone may
affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
• Individual users are permitted to use iPhone, iPod, iPod classic, iPod
nano, iPod shuffle, and iPod touch for private copy and playback of
non-copyrighted contents and contents whose copy and playback is
permitted by law. Copyright infringement is prohibited by law.

Basic Operations

ISO9660 level 1
When written in other formats, it may not be possible to play the
disc properly.

Connections

CD-R and CD-RW discs created in the format described below can
be played.

Troubleshooting
Specifications

• Be sure to give files the extension “.MP3” or “.WMA”. Files with
any other extensions or with no extensions cannot be played.
• Mac OS X files assigned with filenames that begin with “._” are not
music data and cannot be played back.
• In accordance with copyright laws, recordings you have made should
only be used for your personal enjoyment and may not be used in
other ways without permission of the copyright holder.

Index

43

1.RCDN7E3_ENG_008.indd 43

2010/09/03 11:11:56

ENGLISH

USB memory device
GCompatible formatsH

Important information
A USB memory device can be connected to the USB port of this unit
to play music files stored on the USB memory device.
Also, files stored on an iPod can be played when the iPod is connected
directly to the USB port of this unit. See “Connecting an iPod”
(vpage 9).
• Only USB memory devices conforming to mass storage class and
MTP (Media Transfer Protocol) standards can be played on this unit.
• This unit is compatible with USB memory devices in “FAT16” or
“FAT32” format.

If the number of files stored in a USB memory device exceeds 1,000,
the access speed may become slower.

USB memory devices z1
WMA (Windows Media Audio)

3z2

MP3 (MPEG-1 Audio Layer-3)

3

WAV

3

MPEG-4 AAC

3z3

FLAC (Free Lossless Audio Codec)

3

z1 USB
• This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.
• This unit is compatible with WMA META tags.
• WAV format Quantization bit rate: 16 bits.
z2 Copyright-protected files can be played on certain portable
players compatible with MTP.
z3 Only files that are not protected by copyright can be played on
this unit.
Content downloaded from pay sites on the Internet are copyright
protected. Also, files encoded in WMA format when ripped from a
CD, etc. on a computer may be copyright protected, depending on the
computer’s settings.
GCompatible formatsH
Sampling
frequency

Bit rate

Extension

WMA (Windows
Media Audio)

32/44.1/48 kHz

48 – 192 kbps

.wma

MP3 (MPEG-1
Audio Layer-3)

32/44.1/48 kHz

32 – 320 kbps

.mp3

WAV

32/44.1/48 kHz

–

.wav

MPEG-4 AAC

32/44.1/48 kHz

16 – 320 kbps

.aac/
.m4a/
.mp4

FLAC (Free
Lossless Audio
Codec)

32/44.1/48/96
kHz

–

.flac

44

1.RCDN7E3_ENG_008.indd 44

2010/09/03 11:11:56

ENGLISH

Important information

Music server z1

WMA (Windows
Media Audio)

3

3

MP3 (MPEG-1 Audio
Layer-3)

3

3

WAV

3

MPEG-4 AAC

3z2

FLAC (Free Lossless
Audio Codec)

3

Pandora is a free, personalized radio service. Simply enter in
the name of your favorite song, artist or classical composer and
Pandora will create a radio station that plays music you love.
Before you first listen to Pandora on your DENON device, you
will either need to associate your device with an existing Pandora
account or create a new Pandora account for use on the device.
Please launch the Pandora service on your DENON device for more
information about how to complete the device association process.
For more general information about Pandora please visit the
Pandora FAQ at http://blog.pandora.com/faq/

n About Rhapsody

Troubleshooting

GCompatible formatsH
Extension

WMA (Windows
Media Audio)

32/44.1/48 kHz

48 – 192 kbps

.wma

MP3 (MPEG-1
Audio Layer-3)

32/44.1/48 kHz

32 – 320 kbps

.mp3

WAV

32/44.1/48 kHz

–

.wav

MPEG-4 AAC

32/44.1/48 kHz

16 – 320 kbps

.aac/
.m4a/
.mp4

FLAC (Free
Lossless Audio
Codec)

32/44.1/48/96
kHz

–

.flac

Index

Bit rate

Specifications

Sampling
frequency

Explanation terms

Rhapsody is a paid music broadcast service of RealNetworks.
When you first listen to Rhapsody, it is necessary to subscribe to
a Rhapsody account at the Rhapsody homepage by your PC and
register this machine. See the Rhapsody homepage for details.
http://www.rhapsody.com/denon

Information

A server or server software compatible with distribution in the
corresponding formats is required to play music files via a network.
z1 Music server
• This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.
• This unit is compatible with WMA META tags.
• WAV format Quantization bit rate: 16 bits.
z2 Only files that are not protected by copyright can be played on
this unit.
Content downloaded from pay sites on the Internet are copyright
protected. Also, files encoded in WMA format when ripped from a
CD, etc. on a computer may be copyright protected, depending on the
computer’s settings.

n About Pandora

Advanced Operations

Internet radio

Napster is a monthly subscription music distribution service
provided by Napster LLC. This service allows users to download
and play pieces of music they want to hear on this unit. Before
you can use Napster, you will need to visit the Napster website on
your PC to create an account and register as a member. For details,
access the following site:
http://www.napster.com/choose/index_default.html

Basic Operations

• Internet radio refers to radio broadcasts distributed over the
Internet.
Internet radio stations from around the world can be received.
• This unit is equipped with the following Internet radio functions:
• Stations can be selected by genre and region.
• Up to 56 Internet radio stations can be preset.
• Internet radio stations in MP3 and WMA (Windows Media
Audio) format can be listened to.
• Your favorite radio stations can be registered by accessing an
exclusive DENON Internet radio URL from a Web browser on
a computer.
• The function is managed for individual users, so you must provide
your MAC or e-mail address.
Exclusive URL: http://www.radiodenon.com
• The radio station database service may be suspended without
notice.
• This unit’s Internet radio station list is created using a radio
station database service (vTuner). This database service provides
a list edited and created for this unit.

n About Napster

This function lets you play music files and playlists (m3u, wpl)
stored on a computer (music server) connected to this unit via a
network.
With this unit’s network audio playback function, connection to the
server is possible using one of the technologies below.
• Windows Media Player Network Sharing Service
• Windows Media DRM10
GCompatible formatsH

Connections

n About the internet radio function

n Music server

Getting Started

Network audio

45

1.RCDN7E3_ENG_008.indd 45

2010/09/03 11:11:56

ENGLISH

Explanation terms
A
AES (Advanced Encryption Standard)
This is a next generation standard encryption
method replacing the current DES and 3DES, and
because of its high security it is expected to be
applied widely to wireless LANs in the future. It
uses the “Rijndael” algorithm developed by two
Belgian cryptographers to divide the data into
blocks of fixed lengths and encrypt each block.
It supports data lengths of 128, 192 and 256 bits
and key lengths of 128, 192 and 256 bits as well,
offering extremely high encryption security.
B
Bit rate
This expresses the read amount per 1 second of
video/audio data recorded in a disc.
D
DLNA
DLNA and DLNA CERTIFIED are trademarks and/
or service marks of Digital Living Network Alliance.
Some contents may not be compatible with other
DLNA CERTIFIED™ products.
F
Finalize
This is processing that enables playing back of disc
of CD, which was recorded using a recorder, by
other players.
I
IEEE 802.11b
This is one wireless LAN standard set by the 802
working group that establishes LAN technology
standards at the IEEE (Institute of Electrical and
Electronics Engineers) of the United States. It
uses the 2.4 GHz band usable freely without
a radio frequency license (ISM band), enabling
communications at a maximum speed of 11 Mbps.
• The value indicated above is the maximum
theoretical value for the wireless LAN standard,
and does not indicate the actual data transfer rate.

IEEE 802.11g
This is another wireless LAN standard set by the
802 working group that establishes LAN technology
standards at the IEEE (Institute of Electrical and
Electronics Engineers) of the United States, and
is compatible with IEEE 802.11b. It also uses the
2.4 GHz band, but enables communications at a
maximum speed of 54 Mbps.
• The value indicated above is the maximum
theoretical value for the wireless LAN standard,
and does not indicate the actual data transfer rate.
M
MP3 (MPEG Audio Layer-3)
This is an internationally standardized audio data
compression scheme, using the “MPEG-1” video
compression standard. It compresses the data
volume to about one eleventh its original size while
maintaining sound quality equivalent to a music CD.
MPEG (Moving Picture Experts Group), MPEG-2,
MPEG-4
These are the names for digital compression format
standards used for the encoding of video and audio.
Video standards include “MPEG-1 Video”, “MPEG2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio
standards include “MPEG-1 Audio”, “MPEG-2
Audio”, “MPEG-4 AAC”.
N
Network Names
(SSID: Security Set Identifier)
When forming wireless LAN networks, groups are
formed to prevent interference, data theft, etc.
This grouping is done by “SSID” or “Security Set
Identifiers”. For further security, a WEP key is set
and signal transfer is not possible unless the SSID
and WEP key match.
P
Protection circuit
This is a function to prevent damage to components
within the power supply when an abnormality
such as an overload, excess voltage occurs or
temperature for any reason.
In this unit, the power turns off suddenly.

S
Sampling frequency
Sampling involves taking a reading of a sound wave
(analog signal) at regular intervals and expressing
the height of the wave at each reading in digitized
format (producing a digital signal).
The number of readings taken in one second is
called the “sampling frequency”. The larger the
value, the closer the reproduced sound is to the
original.
Speaker impedance
This is an AC resistance value, indicated in Ω
(ohms). Greater power can be obtained with this
value smaller.
T
TKIP (Temporal Key Integrity Protocol)
This is a network key used for WPA. The encryption
algorithm is RC4, the same as for WEP, but the
security level is increased by changing the network
key used for encryption for each packet.
V
vTuner
This is a free online content server for Internet
radio. Note that usage fees are included in upgrade
costs.
For inquiries about this service, visit the vTuner site
below.
vTuner website: http://www.radiodenon.com
This product is protected by certain intellectual
property rights of Nothing Else Matters Software
and BridgeCo. Use or distribution of such technology
outside of this product is prohibited without a
license from Nothing Else Matters Software and
BridgeCo or an authorized subsidiary.
W
WEP Key (Network Key)
This is key information used for encrypting data
when conducting data transfer. On this unit, the
same WEP key is used for data encryption and
decryption, so the same WEP key must be set on
both devices in order for communications to be
established between them.

Wi-Fi®
Wi-Fi Certification assures tested and proven
interoperability by the Wi-Fi Alliance, a group
certifying interoperability among wireless LAN
devices.
Windows Media DRM
This is a copyright protection technology developed
by Microsoft.
Content providers are using the digital rights
management technology for Windows Media
contained in this device (WM-DRM) to protect
the integrity of their content (Secure Content) so
that their intellectual property, including copyright,
in such content is not misappropriated. This
device uses WM-DRM software to play Secure
Content (WM-DRM Software). If the security of
the WM-DRM Software in this device has been
compromised, owners of Secure Content (Secure
Content Owners) may request that Microsoft
revoke the WM-DRM Software’s right to acquire
new licenses to copy, display and/or play Secure
Content. Revocation does not alter the WM-DRM
Software’s ability to play unprotected content.
A list of revoked WM-DRM Software is sent to
your device whenever you download a license for
Secure Content from the Internet or from a PC.
Microsoft may, in conjunction with such license,
also download revocation list onto your device on
behalf of Secure Content Owners.
Windows Media Player Ver. 11
This is a media player distributed free of charge by
Microsoft Corporation.
It can be used to play playlists created with
Windows Media Player Ver. 11 as well as files in
such formats as WMA, DRM WMA, MP3 and WAV.
WMA (Windows Media Audio)
This is audio compression technology developed by
Microsoft Corporation.
WMA data can be encoded using Windows Media®
Player Ver.7, 7.1, Windows Media®Player
for Windows® XP and Windows Media® Player 9
Series.
To encode WMA files, only use applications
authorized by Microsoft Corporation. If you use
an unauthorized application, the file may not work
properly.

46

1.RCDN7E3_ENG_008.indd 46

2010/09/03 11:11:56

ENGLISH

GGeneralH
Countermeasure

Page

• Reset the microprocessor.

37

• Check the connections on
the set's rear panel and the
connection of the power plug to
the power outlet.

10

• Select the appropriate input
source.
• Volume control set to minimum. • Turn volume up to suitable level.
• MUTING is on.
• Switch off MUTING.

12

Display is off.

• The Dimmer setting is set to
“OFF”.

• Set to something other than
“OFF”.

13

Power turns off
suddenly and
POWER indicator
flashes red.
(Flashes at 0.5
second intervals)

• Core wires of two speakers
are touching each other or a
core wire is sticking out of
the terminal and touching the
set’s rear panel, activating the
protection circuit.

• First unplug the power cord,
then twist the core wires tightly
or terminate the speaker cables,
then reconnect.

5

Power turns off
suddenly and
POWER indicator
flashes red.
(Flashes at 0.25
second intervals)

• Set is damaged.

• Turn off the power and contact
a DENON service center.

–

Power turns off
suddenly and
POWER indicator
flashes red.
(Flashes at 2
second intervals)

• Protection circuit activated due
to a rise in internal temperature.

• Turn off the power, wait for the
set to fully cool down, then turn
the power back on.
• Place the set in a well-ventilated
location.

6

• Wrong input source selected.

Information

Cause
• External noise or interference is
causing the set to malfunction.
• Power cord not plugged in
securely.

Advanced Operations

Symptom
Set does not
operate properly.
Display not lit
and sound not
produced when
power switched
to on.
Display lit but
sound not
produced.

Basic Operations

If a problem occurs first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other components operating properly?
If this unit does not operate properly, check the items listed in the table below. If the problem persists,
there may be a malfunction.
In this case, disconnect the power immediately and contact your retail outlet.

Connections

There are two methods: push-button and PIN (Personal
Identification Number) code.

Troubleshooting

Getting Started

WPA (Wi-Fi Protected Access)
This is a security standard established by the Wi-Fi
Alliance. In addition to the conventional SSID
(network name) and WEP key (network key), it also
uses a user identification function and encrypting
protocol for stronger security.
WPA2 (Wi-Fi Protected Access 2)
This is a new version of the WPA established by the
Wi-Fi Alliance, compatible with more secure AES
encryption.
WPA-PSK/WPA2-PSK (Pre-shared Key)
This is a simple authentication system for mutual
authentication when a preset character string
matches on the wireless LAN access point and
client.
WPS (Wi-Fi Protected Setup)
This is a standard drawn up by the Wi-Fi Alliance
to ease the task of setting up wireless LAN
connections and configuring security.

12
12

Explanation terms
Troubleshooting
Specifications
Index

II

47

1.RCDN7E3_ENG_008.indd 47

2010/09/03 11:11:56

ENGLISH
Symptom
The TV sound is
not output.

“No Network
Connection” is
displayed.

Cause

Countermeasure

• Other digital audio signals than • When you try to input digital
2 channel linear PCM cannot audio signals other than 2
be input through AUX IN 3 channel linear PCM to this unit,
(OPTICAL) terminal of this unit.
set the digital audio output
setting of the TV to 2 channel
PCM.
For details, see the operating
instructions of the TV.
• The network is not properly set • Perform “Network First Setup.”
up.
• Select a source other than the
network function.

Page
–

27
12

GRemote controlH
Symptom
Set does not
work properly
when remote
control operated.

Cause
• Batteries are worn.
• You are operating outside of the
specified range.
• Obstacle between main unit and
remote control.
• The batteries are not inserted
in the proper direction, as
indicated by the polarity marks
in the battery compartment.
• The set’s remote control sensor
is exposed to strong light (direct
sunlight, fluorescent light, etc.).

Countermeasure
• Replace with new batteries.
• Operate within the specified
range.
• Remove the obstacle.
• Insert the batteries in the
proper direction, following the
polarity marks in the battery
compartment.
• Move the set to a place in which
the remote control sensor will
not be exposed to strong light.

Page
4
4
–
4

GCDH
Symptom
Cause
“Unsupported”
• The disc is not properly loaded.
is shown on the
display even
though a CD is
loaded.
Disc does not
• The disc is dirty or scratched.
play when 1/3
button is pressed.

Countermeasure
• Reload the disc.

Page
3

• Wipe the disc clean or replace
the disc.

3

• Wipe the disc clean or replace
the disc.

3

A CD-R or CD-RW • The disc has not been finalized. • Finalize the disc then play it.
disc cannot be
• The recording conditions are bad • Use a properly recorded disc.
played.
or the quality of the disc itself
it poor.
MP3 and WMA
• The file formats, extensions or
• Create discs with file formats,
files cannot be
settings made when the disc
extensions or settings
played.
was created are not compatible
compatible with this unit.
with this unit.

3
–

A specific part
of a disc is not
played.

• The disc is dirty or scratched.

43

GTunerH
4

Symptom
Continuous noise
is heard when
receiving FM
programs.
Hissing or
continuous noise
is heard when
receiving AM
programs.

Cause
• Antenna cable is not properly
connected.

• This may be noise from a TV or
interference from a broadcast
station.

Countermeasure
• Connect the antenna cable
properly.
• Connect an outdoor antenna.
• Turn off the TV.
• Change the position and
direction of the AM loop
antenna.

Page
7
–
–
7

48

1.RCDN7E3_ENG_008.indd 48

2010/09/03 11:11:56

ENGLISH
Page
9
–

–

–
17

–

Cannot connect
to preset or
favorite radio
stations.
For some
radio stations,
“Server Full”
or “Connection
Down” is
displayed and
station cannot be
connected to.
Sound is broken
during playback.

Sound quality is
poor or played
sound is noisy.

Page
–

• Launch the server.
• Check the set’s IP address.
• Wait a while before trying again.
• It is not possible to connect to
radio stations that are no longer
in service.
• Wait a while before trying again.

–
27
–

• Network’s signal transfer speed • This is not a malfunction. When
is slow or communications lines playing broadcast data with a
or radio station is congested.
high bit rate, the sound may
be broken, depending on the
communications conditions.
• File being played has a low bit • This is not a malfunction.
rate.

–

–

–

–

Explanation terms

44

Countermeasure
• Check the computer’s or router’s
firewall settings.
• Turn on the power.

Information

44

Cause
• The computer’s or router’s
firewall is activated.
• Computer’s power is not turned
on.
• Server is not running.
• Set’s IP address is wrong.
• Radio station is not currently
broadcasting.
• Radio station is not currently in
service.
• Station is congested or not
currently broadcasting.

Advanced Operations

9
–

Symptom
Server is not
found, or it is
not possible to
connect to the
server.

Basic Operations

8

45

Troubleshooting

–
19

Specifications

27
45
45

Index

Cause
Countermeasure
• The set cannot recognize a USB • Check the connection.
memory device.
• A USB memory device not
• Connect a USB memory device
conforming to mass storage class conforming to mass storage
or MTP standards is connected.
class or MTP standards.
• A USB memory device that
• This is not a malfunction.
the set cannot recognize is
DENON does not guarantee that
connected.
all USB memory devices will
operate or receive power.
• USB memory device is
• Connect the USB memory
connected via USB hub.
device directly to the USB port.
iPod cannot be
• Input source other than “iPod” • Switch the INPUT to “iPod” or
played.
or “USB” is selected.
“USB”.
• Cable is not properly connected. • Reconnect.
Files on a USB
• USB memory device is in a
• Set the format to FAT16 or
memory device
format other than FAT16 or
FAT32. For details, refer to the
cannot be played.
FAT32.
USB memory device’s operating
instructions.
• USB memory device is divided
• When divided into multiple
into multiple partitions.
partitions, only files stored in the
top partition can be played.
• Files are stored in a non• Record the files in a compatible
compatible format.
format.
• You are attempting to play a file • Files that are copyright
that is copyright protected.
protected cannot be played on
this set.
Internet radio
• Ethernet cable is not properly
• Check the connection status.
cannot be played.
connected or network is
disconnected.
• Program is being broadcast in
• Only Internet radio programs in
non-compatible format.
MP3 and WMA can be played
on this set.
• The computer’s or router’s
• Check the computer’s or
firewall is activated.
router’s firewall settings.
• Radio station is not currently
• Choose a radio station that is
broadcasting.
currently broadcasting.
• IP address is wrong.
• Check the set’s IP address.
Files stored on a • Files are stored in a non• Record in a compatible format.
computer cannot
compatible format.
be played.
• You are attempting to play a file • Files that are copyright protected
that is copyright protected.
cannot be played on this set.
• Set and computer are connected • The set’s USB port cannot
by USB cable.
be used for connection to a
computer.

Connections

Symptom
When a USB
memory device
is connected,
“USB” is not
displayed.

Getting Started

GInternet radio/Music server/iPod/USB/memory deviceH

–

49

1.RCDN7E3_ENG_008.indd 49

2010/09/03 11:11:56

ENGLISH
GPandoraH

GNapsterH

Symptom
Cannot login to
Pandora. (“Email
address” or
“Password” is
displayed.)
"Account is no
longer active" is
displayed.

Cause
• Login information is incorrect.

"Pandora is only
available for use
in United States"
is displayed.
"Incorrect Email
or Password" is
displayed.
"No skips
remaining" is
displayed.

• You are trying to access from a
country where Pandora is not
available.

• Your account is expired.

• You entered an incorrect
account or password for the
login authentication.
• You repeatedly performed the
forward skip operation for tracks
within the same station. No
more forward skip operation is
available.
"100 Station Limit" • You have already registered 100
is displayed.
stations. You can not register a
new station.
"Please Try
• Pandora is performing system
Again Later" is
maintenance.
displayed.

Countermeasure
• Check if the “Email address”
for Pandora has been properly
entered. Re-enter the
“Password”. (Password is not
displayed.)
• Obtain a new account.
• Contact Pandora Listener
Support at pandora-support@
pandora.com.
• Pandora is not available in all
countries. Please check http://
blog.pandora.com/faq/
• Enter them again.

Page
22

–

–

22

• Unfortunately,
our
music
licenses force us to limit the
amount of tracks you can skip in
an hour.

–

• Reduce the number of stations
to less than 100.

–

• Please try again later.

–

Symptom
Cannot login
to Napster.
(“Subscription
required” is
displayed.)
Cannot login
to Napster.
(“Incorrect
Username or
Password” is
displayed.)

Cause
• Login information is incorrect.

Countermeasure
• Check if the Username for
Rhapsody has been properly
entered. Re-enter the Password.
(Password is not displayed.)
www.rhapsody.com/denon

Page
–

• Incorrect username or password • Enter the correct username and
entered for login authentication.
password and retry login.
• Check if the Username for
Napster has been properly
entered. Re-enter the Password.
(Password is not displayed.)
http://www.napster.com/
choose/index_default.html

–

–

GWireless LANH
Symptom
Cannot connect
to network.

GRhapsodyH
Symptom
Cannot login to
Rhapsody.
(“Incorrect
Username or
Password” is
displayed.)

Cause
Countermeasure
• Login authentication error.
• Enter the correct username and
• If a nonsubscriber user accesses password and retry login.
it. Or when the listening
limitation exceeds it.

Page
24
Played sound is
interrupted or
sound cannot be
played.

Cause
• The settings of the SSID
and network key (WEP) are
incorrect.
• The reception is poor and the
signals cannot be received.

Countermeasure
• Match the network settings
with this unit settings.
• Shorten the distance from the
wireless LAN’s access point,
remove any obstacles and
otherwise improve visibility,
then try reconnecting. Also
install away from microwave
ovens and the access points of
other networks.
• There are multiple networks and • Set the access point’s channel
the usable channels overlap.
settings away from the channels
used for other networks.
Alternatively, connect using a
network cable.
• The router power is off.
• Turn on the router power.
• There are multiple networks and • Set the access point’s channel
the usable channels overlap.
settings away from the channels
used for other networks.
Alternatively, connect using a
network cable.

Page
31, 32
–

–

–
–

50

1.RCDN7E3_ENG_008.indd 50

2010/09/03 11:11:56

ENGLISH

n CD player

n Wireless LAN
Network type (wireless LAN standards)
100 dB
100 dB
0.01 %

n Audio AMP

200 mV/32 kΩ
110 mV/24 kΩ

Used frequency range
No. of channels

5 Hz to 20 kHz (±3 dB)
0.05 %
86 dB

n Tuner

n Power supply
Power supply voltage/frequency
Power consumption
Power consumption in standby mode

AC 120 V, 60 Hz
65 W
0.3 W

n Miscellaneous

530 to 1710 kHz
40 dB
55 dBμV/m

External dimensions
Weight

280 (W) x 112 (H)x 299 (D) mm
(11-1/32” x 4-13/32” x 11-49/64”)
4.3 kg (9 lbs 7.7 oz)

z Wi-Fi® conformity indicates tested and proven interoperability by the “Wi-Fi Alliance”, a group
certifying interoperability among wireless LAN devices.
• For purposes of improvement, specifications and design are subject to change without notice.

n Clock

Troubleshooting

Clock method

Explanation terms

87.5 to 107.9 MHz
65 dB
9 dBμV (IHF)

Information

• FM tuner
Range of receivable frequencies
S/N ratio (mono)
Sensitivity (S/N 30 dB)
• AM tuner
Range of receivable frequencies
S/N ratio
Sensitivity (S/N 20 dB)

Security

Advanced Operations

Dynamic power
High frequency distortion
Input sensitivity/impedance
AUX1, AUX2
Portable in
Frequency response (5 W, 8 Ω)
AUX input
Total harmonic distortion (1 kHz, 5 W, 8 Ω)
AUX input
S/N ratio (10 W, 8 Ω, IHF-A)
AUX input

2-channel driving
65 W + 65 W (4 Ω/ohms, 1 kHz, T.H.D. 0.7 %)
80 W + 80 W (4 Ω/ohms)
0.1 % (Rated output: –3 dB), 4 Ω/ohms, 1 kHz

Basic Operations

Rated output

Transfer rate

Conforming to IEEE 802.11b
Conforming to IEEE 802.11g
(Conforming to Wi-Fi®)z
DS-SS: 11 / 5.5 / 2 / 1 Mbps (Automatic switching)
OFDM: 54 / 48 / 36 / 24 / 18 / 12 / 9 / 6 Mbps (Automatic
switching)
SSID (Network name)
WEP key (network key) (64/128 bits)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
2,412 MHz – 2,462 MHz
Conforming to IEEE 802.11b : 11ch (DS-SS) (Of which 1
channel used)
Conforming to IEEE 802.11g : 11ch (OFDM) (Of which 1
channel used)

Connections

• Audio performance
S/N ratio (1 kHz)
Dynamic range (1 kHz)
Total harmonic distortion (1 kHz)

Getting Started

Specifications

Within 1 – 2 minutes per month

Specifications
Index

51

1.RCDN7E3_ENG_008.indd 51

2010/09/03 11:11:56

ENGLISH

Index
vA
Accessories ·························································· 2
AES ······························································ 32, 46
AM loop antenna ·················································· 7
Auto preset ························································ 16
Auto Standby ······················································ 35

vB
BASS ·································································· 12
Bit rate ·············································· 43, 44, 45, 46
Browse mode ····················································· 17

vC
Cable
Audio cable ·········································· 5, 6, 9, 10
Ethernet cable···················································· 8
Optical cable ······················································ 6
Pin-plug cable····················································· 5
Speaker cable ···················································· 5
Stereo pin-plug cable ········································· 6
Characters ········································ 31, 32, 36, 37
Connection
Antenna ····························································· 7
iPod ···································································· 9
Network ····························································· 8
Portable audio player········································ 10
Power cord ······················································· 10
Recording components······································ 6
Speaker ······························································ 5
TV······································································· 6
USB memory device ·········································· 9
Current time ················································· 11, 29

vD
Display’s brightness ··········································· 13
DLNA ·································································· 46

vF
Favorite list ························································· 26
Finalize ··························································· 3, 46
Firmware update ················································ 35
FM indoor antenna ··············································· 7
Friendly Name Edit ············································· 34
Front panel ························································· 38

vH
Headphones ······················································· 13

vI
IEEE 802.11b ······················································ 46
IEEE 802.11g ······················································ 46
Input source ······················································· 12
Inputting characters ··········································· 36
Internet radio ······················································ 19

vM
Menu map ·························································· 27
MP3 ·················································· 15, 44, 45, 46
MPEG ································································· 46
MPEG-4 AAC ······················································ 44
Music server ······················································ 20
Mute ··································································· 12

vN
Napster ······························································· 21
Network Names (SSID) ······································ 46
Network Standby ··············································· 34

vP
Pandora ······························································ 22
Party mode ························································· 33
PC Language ······················································ 34
Playback
AUX ·································································· 25
CD ···································································· 13
Files ································································· 15
FM/AM broadcasts ·········································· 16
Internet radio ··················································· 19
iPod ·································································· 17
Napster ···························································· 21
Network audio ··········································· 19, 45
Portable audio player········································ 25
Program ··························································· 14
Random ··························································· 14
Repeat ····························································· 14
USB memory device ·································· 18, 44
Protection circuit ············································ 6, 46

vR
Rear panel ·························································· 39
Remote control ·································· 4, 40, 41, 42
Batteries····························································· 4
Remote mode ···················································· 17
Resetting the microprocessor ···························· 37
Rhapsody ····················································· 24, 45

vS
Sampling frequency ························· 43, 44, 45, 46
Screen saver ······················································ 35
SDB ···································································· 12
Setting
Clock ································································ 29
Network ··············································· 30, 31, 32
Other································································ 35
Timer································································ 28
Sleep timer ························································· 13
Speaker impedance ········································ 5, 46
Speaker optimize ················································ 35
Subwoofer ···························································· 5

vT
Timer ·································································· 28
TKIP ···································································· 46
Tone ··································································· 12
Top panel ···························································· 39
TREBLE ······························································ 12

vV
Volume ······························································· 12
vTuner ·························································· 45, 46

vW
WEP Key ······················································ 32, 46
Wi-Fi ··································································· 46
Windows Media DRM ·································· 45, 46
Windows Media Player Ver. 11 ···················· 20, 46
WMA ················································ 15, 44, 45, 46
WPA ····························································· 32, 47
WPA2 ··························································· 32, 47
WPA-PSK/WPA2-PSK ··································· 32, 47
WPS ····························································· 31, 47

52

1.RCDN7E3_ENG_008.indd 52

2010/09/03 11:11:57

4.RCDN7E3_Backpage_008.indd 33

2010/09/03 8:46:22

www.denon.com
D&M Holdings Inc.
Printed in China 5411 10541 008D

4.RCDN7E3_Backpage_008.indd 34

2010/09/03 8:46:22



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : Adobe InDesign CS4_J (6.0.5)
Modify Date                     : 2010:09:03 13:18:28+09:00
Create Date                     : 2010:09:03 11:12:32+09:00
Metadata Date                   : 2010:09:03 13:18:28+09:00
Format                          : application/pdf
Title                           : 1.RCDN7E3_ENG_008.indd
Creator                         : imai_keiko
Document ID                     : uuid:d0f0d6c1-aa3e-446b-bd7e-9b673cc21d54
Instance ID                     : uuid:07e1d0c5-ddb2-49e0-bfcb-c8000ef8051b
Page Count                      : 58
Page Layout                     : SinglePage
Author                          : imai_keiko

EXIF Metadata provided by EXIF.tools