Denso Wave orporated DWBT013 Bluetooth Adapter User Manual
Denso Wave Incorporated Bluetooth Adapter
User Manual.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2290472 |
| Application ID | sjRXxVm8WyYXlHUASCFdDA== |
| Document Description | User Manual.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 3.02kB (37806 bits) |
| Date Submitted | 2014-06-10 00:00:00 |
| Date Available | 2014-12-07 00:00:00 |
| Creation Date | 2014-06-10 11:40:12 |
| Producing Software | Acrobat Distiller 9.5.5 (Windows) |
| Document Lastmod | 2014-06-10 11:40:12 |
| Document Title | Microsoft PowerPoint - DWBT013_Installation_And_Users_Manual_140609.ppt |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | dwu900404 |
Jun 10, 2014 DWBT013 Installation Manual Contents 1. Supply Voltage 2. Dimensions and Connector specification 3. Notice Jun 10, 2014 1. Supply Voltage Item Specifications Supply Voltage DC 3.3V Supply Voltage Range (Note) DC 3.0-3.6V Note: These values are specified at the connector terminal. Jun 10, 2014 2. Dimensions and Connector specification (31mm) (Electronic components were omitted) (15mm) Label (3mm) Connector Specification: 0.5mm PITCH FPC CONNECTOR Circuits: 18 Jun 10, 2014 3. Notice This device complies with part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. Le présent appareil est conforme aux la partie 15 des règles de la FCC et CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. When the DWBT013 is installed in Class A equipment Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. When the DWBT013 is installed in Class B equipment Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Jun 10, 2014 FCC CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Radiation Exposure Statement: The product comply with the FCC and Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Déclaration d'exposition aux radiations: Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible. Jun 10, 2014 This device is intended only for OEM integrators under the following conditions: 1)The transmitter module may not be co-located with any other transmitter or antenna. 2)Module approval valid only when the module is installed in the tested host or compatible series of host As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. 2) L'approbation du module est valable uniquement lorsque le module est installe dans l'equipement teste ou dans des equipements compatibles testes. Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC and Canada authorization is no longer considered valid and the FCC ID and IC-ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC and Canada authorization. NOTE IMPORTANTE: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada. Jun 10, 2014 Please describe the following warning on the End product which contains this module. Contains Transmitter Mobile FCC ID:PZWDWBT013 IC:1551C-DWBT013 or Contains FCC ID:PZWDWBT013 IC:1551C-DWBT013
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : dwu900404 Create Date : 2014:06:10 11:40:12+09:00 Modify Date : 2014:06:10 11:40:12+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 9.5.5 (Windows) Format : application/pdf Title : Microsoft PowerPoint - DWBT013_Installation_And_Users_Manual_140609.ppt Creator : dwu900404 Document ID : uuid:05193b94-f04d-4603-a2ab-07fe18e8654b Instance ID : uuid:827895fd-0c3f-4194-87b3-eec0b83bff87 Page Count : 7EXIF Metadata provided by EXIF.tools