Denso DNNS016 Navigation System with Bluetooth Transmitter User Manual Technical DNNS016
Denso Corporation Navigation System with Bluetooth Transmitter Technical DNNS016
Denso >
User Manual
6. User’s manual requirement 6.1.Operation manual (1) Registration of the Bluetooth products Bluetooth RF signal Transmits the registration signal from the Bluetooth product to the navigation system and register the Bluetooth product at the navigation system. (2) Selection of the Bluetooth product Bluetooth RF signal Transmits the selection signal from the navigation system to the Bluetooth product and connect the navigation system with the Bluetooth product. (3) Call Cellular RF signal Bluetooth RF signal Call by inputting the phone number with the touch sensitive panel installed in the navigation system. Get the phone by operating the touch sensitive panel installed in the navigation system. 6.2.User’s Manual Requirement of FCC rule DNNS016 is installed in vehicle, so DNNS016 has no manual for user. FCC user’s manual requirements that are FCC rule Part 15.21 and 15.105 are described on user’s manual of the vehicle as followings. FCC and RSS-210 Regulations This device complies with Part 15 of the FCC Rules and RSS-210 Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different form that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. CAUTION : Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and legs). Co-location : This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. -16-
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2005:02:28 18:36:26+09:00 Create Date : 2005:02:25 14:30:37+09:00 Title : Technical Document _DNNS016_ .PDF Author : 30.196 Creator : Technical Document (DNNS016) .doc - Microsoft Word Producer : Acrobat PDFWriter 4.0 Windows NT Page Count : 2 Mod Date : 2005:02:28 18:36:26+09:00 Creation Date : 2005:02:25 14:30:37+09:00 Metadata Date : 2005:02:28 18:36:26+09:00 Has XFA : NoEXIF Metadata provided by EXIF.tools