DesignTech SHR1 Security R/C Receiver User Manual 30074 Walmart DM Instructions v1 3 p65

DesignTech International Inc Security R/C Receiver 30074 Walmart DM Instructions v1 3 p65

users manual

Mounting the Driveway Sensor:Mounting the Driveway Sensor:Mounting the Driveway Sensor:Mounting the Driveway Sensor:Mounting the Driveway Sensor:1. The stake comes in two parts.  Connect the twostakes by pushing them firmly together.2.  Mount the Driveway Monitor stake on the side of the driveway.3. Once the stake is in the ground, mount the driveway sensor onto the stake usingthe two screws as shown in the picture below. Do not pound the stake into theground with the sensor attached.Another option is to mount the sensor to a fence, tree, or post.  Thehigher the sensor is mounted off the ground, the better the range. Theobject to which you mount the driveway sensor must not move in thewind to avoid false triggers on windy days. Do not mount the sen-sor to metal objects.Page 1                                                                                                       Driveway Monitor 30074  Driveway Monitor 30074                                                                                                 Page 2Installation InstructionsWireless Driveway MonitorTMModel # 30074v 1.47955 Cameron Brown Court • Springfield, Virginia 22153 USAwww.designtech-intl.com©2001 DesignTech International, Inc.Whenever a vehicle drives by, you will be notified in the house.If you have any problems with:•  Getting the system to function,•  Getting the system to work from the end of yourdriveway,•  Making the volume higher or lower ,•  Using 2 or more sensors or receivers withyour system,•  or buying additional accessories        Please refer to the separate REFERENCE GUIDE.Installing Batteries in the Driveway Sensor:Installing Batteries in the Driveway Sensor:Installing Batteries in the Driveway Sensor:Installing Batteries in the Driveway Sensor:Installing Batteries in the Driveway Sensor:1. Pop the back of the Driveway Sensor off using a flatblade (slotted) screwdriver.2. Insert two "D" alkaline batteries (not included). Note thepositive and negative battery orientation3. Close the case back to-gether tightly. The O-ring should provide awater resistant seal.Setting Up the Driveway Monitor Receiver:Setting Up the Driveway Monitor Receiver:Setting Up the Driveway Monitor Receiver:Setting Up the Driveway Monitor Receiver:Setting Up the Driveway Monitor Receiver:Straighten the 9-inch antenna wire which comes out of the top of the case.The antenna should be vertical.Plug in the AC adapter on the side ofthe receiver. The receiver will chirp andthe alert light will flash red then staygreen.Testing the System Prior to InstallationTesting the System Prior to InstallationTesting the System Prior to InstallationTesting the System Prior to InstallationTesting the System Prior to InstallationThe sensor and receiver are factory set to a unique code.  Before installingthe sensor outside, test the unit by rotating the driveway sensor (rotate thesensor more than 5 feet away from the receiver). (If you listen carefully, youwill hear the sensor softly chirp like a cricket when the unit is transmitting asignal.) The receiver will chime twice and the ALERT light will flash RED for15 minutes.If the receiver does not chime or the red ALERT light does not come onduring this test - refer to the Trouble Shooting section of the ReferenceGuide.O-ringAntennaAlert &Power light- - - -Main Street ----Place sensor25+ ft. frommain streetand 5 ft. orless fromdriveway                                           Driveway25+ft.5 ft.orlessThis device complies with FCC Rules Part 15.  Operation is subject to two conditions:  1) This device may not cause harmful interference, and 2)it must accept any interference received, including that which may cause undesirable operation.FCC ID: ELGDWMTX & ELGSHR1DOC: _____________User is cautioned that changes or modifications not expressly approved by DesignTech couldvoid the user's authority to operate this equipment.Covered under US Patent Numbers:  4,851,775 & 5,239,264

Navigation menu