DesignTech SHR1 Security R/C Receiver User Manual 30074 Walmart DM Instructions v1 3 p65

Download:
Mirror Download [FCC.gov]
Document ID	190100
Application ID	SJ8TjDAhQjyErioGqxM/6A==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.57kB (207077 bits)
Date Submitted	2001-12-21 00:00:00
Date Available	2001-12-19 00:00:00
Creation Date	2001-12-05 15:59:07
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2001-12-13 13:24:42
Document Title	30074 Walmart DM - Instructions v1.3.p65
Document Creator	PageMaker 6.5
Document Author:	dan

v 1.4
Installation Instructions
Wireless Driveway MonitorTM
Mounting the Driveway Sensor:
1. The stake comes in two parts. Connect the two
stakes by pushing them firmly together.
Model # 30074
5 ft.
or
less Driveway
Installing Batteries in the Driveway Sensor:
1. Pop the back of the Driveway Sensor off using a flat
blade (slotted) screwdriver.
2. Insert two "D" alkaline batteries (not included). Note the
positive and negative battery orientation
3. Close the case back together tightly. The Oring should provide a
water resistant seal.
Antenna
Setting Up the Driveway Monitor Receiver:
Straighten the 9-inch antenna wire which comes out of the top of the case.
The antenna should be vertical.
Alert &
Power light
Testing the System Prior to Installation
The sensor and receiver are factory set to a unique code. Before installing
the sensor outside, test the unit by rotating the driveway sensor (rotate the
sensor more than 5 feet away from the receiver). (If you listen carefully, you
will hear the sensor softly chirp like a cricket when the unit is transmitting a
signal.) The receiver will chime twice and the ALERT light will flash RED for
15 minutes.
If the receiver does not chime or the red ALERT light does not come on
during this test - refer to the Trouble Shooting section of the Reference
Guide.
Page 1
- - - -Main Street ---2. Mount the Driveway Monitor stake on the side of the driveway.
3. Once the stake is in the ground, mount the driveway sensor onto the stake using
the two screws as shown in the picture below. Do not pound the stake into the
ground with the sensor attached.
O-ring
Plug in the AC adapter on the side of
the receiver. The receiver will chirp and
the alert light will flash red then stay
green.
25+
ft.
Place sensor
25+ ft. from
main street
and 5 ft. or
less from
driveway
Driveway Monitor 30074
Another option is to mount the sensor to a fence, tree, or post. The
higher the sensor is mounted off the ground, the better the range. The
object to which you mount the driveway sensor must not move in the
wind to avoid false triggers on windy days. Do not mount the sensor to metal objects.
Whenever a vehicle drives by, you will be notified in the house.
If you have any problems with:
• Getting the system to function,
• Getting the system to work from the end of your
driveway,
• Making the volume higher or lower ,
• Using 2 or more sensors or receivers with
your system,
• or buying additional accessories
Please refer to the separate REFERENCE GUIDE.
This device complies with FCC Rules Part 15. Operation is subject to two conditions: 1) This device may not cause harmful interference, and 2)
it must accept any interference received, including that which may cause undesirable operation.
FCC ID: ELGDWMTX & ELGSHR1
DOC: _____________
User is cautioned that changes or modifications not expressly approved by DesignTech could
void the user's authority to operate this equipment.
Covered under US Patent Numbers: 4,851,775 & 5,239,264
7955 Cameron Brown Court • Springfield, Virginia 22153 USA
www.designtech-intl.com
©2001 DesignTech International, Inc.
Driveway Monitor 30074
Page 2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2001:12:05 15:59:07
Producer                        : Acrobat Distiller 4.05 for Windows
Author                          : dan
Creator                         : PageMaker 6.5
Title                           : 30074 Walmart DM - Instructions v1.3.p65
Modify Date                     : 2001:12:13 13:24:42-05:00
Page Count                      : 1

EXIF Metadata provided by EXIF.tools