Detection Systems DS160 Series High Performance Request‑to‑exit Detectors Request To Exit Data Sheet DS161 En US
en-us DS160_DS161_Data_sheet_enUS_9007201890365835 DS160 Series High Performance Request‑to‑exit Detectors
User Manual: Detection Systems DS160 Series High Performance Request-to-exit Detectors Data Sheet Data Sheet
Open the PDF directly: View PDF .
Page Count: 3
Download | |
Open PDF In Browser | View PDF |
Intrusion Alarm Systems | DS160 Series High Performance Request‑to‑exit Detectors DS160 Series High Performance Request‑to‑exit Detectors www.boschsecurity.com The DS160 Series consists of the DS160 Detector (light gray) and the DS161 Detector (black) specifically designed for Request-to-exit (REX) applications. With features such as timers, door monitor with sounder alert, and pointable coverage, the DS160 and DS161 have the flexibility to meet the most stringent REX requirements. The exclusive Sequential Logic Input (SLI) provides added security that is not offered in any other REX device. Functions Sequential Logic Input (SLI) The SLI terminal allows connection of a second device to require sequential detection. This eliminates the possibility that an object that is slid through the door or underneath the door will activate the detector. This input can also be used to lock the sensor if motion is present outside the premises. Door Monitor The sensor can monitor a door contact to allow special control of the internal relay. For example, if the door is opened within the relay time period, the sensor can be programmed to halt the timer. If the door is not opened within a specific time period, the relay can be programmed to deactivate. u Door monitor with sounder alert u Sequential Logic Input (SLI) u Internal vertical pointability u Wrap-around coverage pattern with precise pattern control u Up to 64 second adjustable latch time Sounder Alert An integrated sounder can be programmed to activate if the door is left open too long. The sounder volume is fully adjustable to 85 dB. Keycard Input The keycard input allows the sensor relay to be controlled from an external source, such as an access control system or card reader. Certifications and approvals Europe Complies with EN50131‑1 Grade 2 Region Certification Australia RCM [DS160] Europe CE 2004/108/EC EMC Directive; 2006/95/EC Low-Voltage Directive; 2011/65/EU Restriction of the use of certain hazardous substances in electrical and electronic equipment USA UL ALVY: Access Control Systems Units (UL294) 2 | DS160 Series High Performance Request‑to‑exit Detectors Installation/configuration notes ALARM WILL SOUND WHEN DOOR IS OPENED ALARM WILL SOUND WHEN DOOR IS OPENED 1.2 m (4 ft) 3m (10 ft) The higher that you mount the unit, the larger the coverage area. Do not mount the DS160/DS161 more than 4.6 m (15 ft) above the floor. Side view of coverage pattern with the unit mounted at 4.6 m (15 ft) above the floor with the lens pointed straight down. Coverage Information The coverage (detection area) varies depending on the mounting height above the floor, angle of the lens, and whether the unit is mounted on a wall above the door or on the ceiling. The coverage is 2.4 m x 3 m (8 ft x 10 ft) The coverage patterns for the detector at a height of 2.3 m (7.5 ft) are shown. The coverage pattern increases or decreases with height and detector alignment. Notice When you mount the unit on the wall and the lens points straight down, some detection zones point toward the wall and do not detect movement. Front View Mounted on wall above door and mounted on ceiling . 75 m (2.5 ft) in front of the door. The diagrams depict views of the coverage pattern with the detector mounted at 2.3 m (7.5 ft) above the floor with the lens pointed straight down. Zones that are pointed toward the wall are not shown. Technical specifications Environmental 1.5 m (5 ft) 3m (10 ft) Side View The higher that you mount the unit, the larger the coverage area. Do not mount the DS160/DS161 more than 4.6 m (15 ft) above the floor. Side view of coverage pattern with the unit mounted at 4.6 m (15 ft) above the floor with the lens pointed straight down. Operating Temperature: -29°C to +49°C (-20°F to +120°F) For UL Certificated installations, 0°C to +49°C (+32°F to +120°F) Radio Frequency Interference (RFI) Immunity: No alarm or setup on critical frequencies in the range from 26 MHz to 1000 MHz at 50 V/m Complies with Environmental Class II (EN50130-5) Mechanical Dimensions: 4.5 cm x 17.1cm x 4.4 cm (1.80 in. x 6.75 in. x 1.75 in.) Material: High impact ABS plastic enclosure Modes Power Loss Default: Programmable fail-safe or fail-secure modes. Timer: Programmable reset accumulative or non-reset counting mode. Electrical .75 m (2.5 ft) Side View 1.5 m (5 ft) Current Draw: 8 mA nominal standby current, 39 mA at 12 VDC in alarm Voltage: 12 VAC or VDC to 30 VAC or VDC Alarm Output: Two Form C relay contacts each rated 1 A at 30 VAC or VDC for resistive loads 3 | DS160 Series High Performance Request‑to‑exit Detectors Indicators: 1 activation LED Relay Latch Time: Adjustable from 0.5 sec to 64 sec. Ordering information DS160 Request‑to‑exit Detector For use in request-to-exit (REX) applications. Provides PIR 2.4 m x 3 m (8 ft x 10 ft) coverage, timers, door monitor with sounder alert, and pointable coverage. Order number DS160 DS161 Request‑to‑exit Detector Black enclosure. For use in Request-to-EXit (REX) applications. Provides PIR, 2.4 m x 3 m (8 ft x 10 ft) coverage, timers, door monitor with sounder alert, and pointable coverage. Order number DS161 Accessories TP160 Trim Plate A light gray trim plate used when mounting the detector over a standard single-gang box. Order number TP160 TP161 Trim Plate A black trim plate used when mounting the sensor over a standard single-gang box. Order number TP161 Represented by: North America: Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 security.sales@us.bosch.com www.boschsecurity.us Europe, Middle East, Africa: Bosch Security Systems B.V. P.O. Box 80002 5617 BA Eindhoven, The Netherlands Phone: + 31 40 2577 284 Fax: +31 40 2577 330 emea.securitysystems@bosch.com www.boschsecurity.com © Bosch Security Systems 2016 | Data subject to change without notice 2634909195 | en, V10, 10. Mar 2016 Asia-Pacific: Robert Bosch (SEA) Pte Ltd, Security Systems 11 Bishan Street 21 Singapore 573943 Phone: +65 6571 2808 Fax: +65 6571 2699 apr.securitysystems@bosch.com www.boschsecurity.asia China: Latin America and Caribbean: Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division 203 Building, No. 333 Fuquan Road Via Anhanguera, Km 98 North IBP CEP 13065-900 Changning District, Shanghai Campinas, Sao Paulo, Brazil 200335 China Phone: +55 19 2103 2860 Phone +86 21 22181111 Fax: +55 19 2103 2862 Fax: +86 21 22182398 latam.boschsecurity@bosch.com www.boschsecurity.com.cn www.boschsecurity.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2016:03:10 15:59:15+01:00 Modify Date : 2016:03:10 15:59:15+01:00 Creator : AH Formatter V5.3 MR3 (5,3,2011,1116) for Windows (x64) Producer : Antenna House PDF Output Library 2.6.0 (Windows (x64)) Title : DS160 Series High Performance Request‑to‑exit Detectors Trapped : False Page Count : 3EXIF Metadata provided by EXIF.tools