Dewalt DCD771C2 TYPE 1 User Manual DRILL DRIVER Manuals And Guides 1409490L
User Manual: Dewalt DCD771C2 TYPE 1 DCD771C2 TYPE 1 DEWALT DRILL DRIVER - Manuals and Guides View the owners manual for your DEWALT DRILL DRIVER #DCD771C2TYPE1. Home:Tool Parts:Dewalt Parts:Dewalt DRILL DRIVER Manual
Open the PDF directly: View PDF 
.
Page Count: 7
| Download | |
| Open PDF In Browser | View PDF |
LULU
5) BATTERY TOOL USE AND CARE
@
rhc]
_as
-JI-
a) Recharge only with the charger specified by the manufacturer.
A charger that is
suitable for one type of battery pack may create a risk of fire when used with another battery
pack.
b) Use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like paper
clips, coins, keys, nails, screws, or other small metal objects, that can make a
connection from one terminal to another. Shorting the battery terminals together may
cause bums or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally
occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or bums.
"0 Z
8_<{
>-o
o_>
--b
>
wz
CD--
111o3
0,,_,
Q
_
Drill/Driver
z
_c3
o
6) SERVICE
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Tool
Safety
Warnings
ARNING!
Read
allresult
safety
and fire
all and/or
instructions.
and
instructions
may
in warnings
electric shock,
serious Failure
injury. to follow the warnings
SAVE ALL WARNINGS
FOR FUTURE
AND INSTRUCTIONS
REFERENCE
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or batteryoperated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders
cause you to lose control
away while operating a power tool. Distractions can
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed
or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting
to power source and/or battery pack, picking up or carrying the tool
Carrying power tools with your finger on the switch or energizing power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in
moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dustrelated hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool Use the correct power tool for your application.
The
correct power tool wll/ do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source andlor the battery pack from the power
tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle powertools
out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tooL Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage
of parts and any other condition that may affect the power tool's operation. If
damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control
g) Use the power tool, accessories
and tool bits, etc. in accordance
with these
instructions,
taking into account the working conditions
and the work to be
performed. Use of the power tool for operations different from those intended could result in
a hazardous situation.
Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
Hold power tool by insulated gripping surfaces, when performing an operation where
the cutting accessory may contact hidden wiring. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power tool "live" and could give the operator an
electric shock.
• Use clamps or other practical way to secure and support the workpiece to a stable
platform. Holding the work by hand or against your body is unstable and may lead to loss of
control.
• Wear safety goggles or other eye protection. Hammering and drilling operations cause
chips to fly. Flying particles can cause permanent eye damage.
• Keep a firm grip on the tool at all times. Do not attempt to operate this tool without holding
it with both hands.
• Accessories and tool may get hot during operation. Wear gloves when handling them if
performing heat producing applications such as hammerdril/ing and drilling metals.
• Do not operate this tool for long periods of time. Vibration caused by hammer action may
be harmful to your hands and arms. Use gloves to provide extra cushion and limit exposure by
taking frequent rest periods.
• Air vents often cover moving parts and should be avoided. Loose clothes, jewelry or long
hair can be caught in moving parts.
WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses. Also use
face or dust mask if cutting operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENX
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI $12.6 ($3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.
_WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to the State of California to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are."
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. Toreduce
your exposure to these chemicals." work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and
other construction activities. Wear protective clothing and wash exposed areas with
soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote
absorption of harmful chemicals.
$_,WARNING: Use of this tool can generate and/or disperse dust, which may cause serious and
permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure. Direct particles away from face and body.
_WARNING: Always wear proper personal hearing protection that conforms to ANSI
$12.6 ($3.19) during use. Under some conditions and duration of use, noise from this product
may contribute to hearing loss.
CAUTION: When not in use, place tool on its side on a stable surface where it will not
cause a tripping or falling hazard. Some tools with large battery packs will stand upright on the
battery pack but may be easily knocked over
• The label on your tool may include the following symbols. The symbols and their definitions are
as follows."
V..................... volts
A ........................ amperes
Hz ................... hertz
W ....................... watts
min ................. minutes
"_ or AC ............ alternating current
-- - or DC ..... direct current
or AC/DC ..... alternating or direct current
(_) ................... Class I Construction
no ....................... no load speed
(grounded)
[] ................... Class II Construction
n......................... rated speed
@ ....................... earthing terminal
....................... safety alert symbol
(double insulated)
.../min ............ per minute
IPM ................. impacts per minute
SPM ............... strokes per minute
Important
Safety
BPM ................... beats per minute
RPM ................... revolutions per minute
sfpm ................... surface feet per minute
Instructions
for All Battery
Packs
When ordering replacement battery packs, be sure to include the catalog number and voltage.
Consult the chart at the end of this manual for compatibility of chargers and battery packs.
The battery pack is not fully charged out of the carton. Before using the battery pack and charger,
read the safety instructions below and then follow charging procedures outlined.
READ
ALL INSTRUCTIONS
_ WARNING:
• Do not charge or use the battery pack in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Inserting or removing the battery pack from
the charger may ignite the dust or fumes.
• NEVER force the batterypack
into the charger. DO NOTmodify the batterypack
in any
way to fit into a non-compatible charger as battery pack may rupture causing serious
personal injury. Consult the chart at the end of this manual for compatibility of batteries and
chargers.
• Charge the battery packs only in designated DEWALT chargers.
• DO NOT splash or immerse in water or other liquids.
• Do not store or use the tool and battery pack in locations where the temperature may
reach or exceed 105 °F (40 °C) (such as outside sheds or metal buildings in summer).
For best life store battery packs in a cool, dry location.
NOTE: Do not store the battery packs in a tool with the trigger switch locked on. Never
tape the trigger switch in the ON position.
_ WARNING: Fire hazard. Never attempt to open the battery pack for any reason. /f the battery
pack case is cracked or damaged, do not insert into the charger Do not crash, drop or damage the
battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped,
run over or damaged in any way (e.g., pierced with a nail, hit with a hammer, stepped on). Damaged
battery packs should be returned to the service center for recycling.
WARNING: Fire hazard. Do not store or carry the battery pack so that metal objects
can contact exposed battery terminals.
For example, do not place the battery pack in
aprons, pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc.
Transporting batteries can possibly cause fires if the battery terminals inadvertently come
in contact with conductive materials such as keys, coins, hand tools and the like. The US
Department of Transportation Hazardous Material Regulations (HMR) actually prohibit transporting
batteries in commerce or on airplanes (e.g., packed in suitcases and carry-on luggage) UNLESS
they are properly protected from short circuits. So when transporting individual battery packs, make
sure that the battery terminals are protected and well insulated from materials that could contact
them and cause a short circuit.
SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM ION (Li-lon)
• Do not incinerate the battery pack even if it is severely damaged or is completely
worn out. The battery pack can explode in a fire. Toxic fumes and materials are created when
lithMm ion battery packs are burned.
• If battery contents come into contact with the skin, immediately
wash area with mild
soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes
or until irritation ceases. If medical attention is needed, the battery electrolyte is composed of a
mixture of liquid organic carbonates and lithium salts.
• Contents of opened battery cells may cause respiratory irritation. Provide fresh air If
symptoms persist, seek medical attention.
i_WARNING: Bum hazard. Battery liquid may be flammable if exposed to spark or flame.
The
RBRC
TM
Seal
The RBRC TM (Rechargeable Battery Recycling Corporation) Seal on the nickel
cadmium, nickel metal hydride or lithium ion batteries (or battery packs) indicate that
the costs to recycle these batteries (or battery packs) at the end of their useful life have
already been paid by DEWALT. In some areas, it is illegal to place spent nickel
cadmium, nickel metal hydride or lithium ion batteries in the trash or municipal solid
waste stream and the RBRC program provides an environmentally conscious
alternative.
RBRC TM, in cooperation with DFWALT and other battery users, has established programs in the
United States and Canada to facilitate the collection of spent nickel cadmium, nickel metal hydride
or lithium ion batteries. Help protect our environment and conserve natural resources by returning
the spent nickel cadmium, nickel metal hydride or lithium ion batteries to an authorized DEWALT
service center or to your local retailer for recycling. You may also contact your local recycling center
for information on where to drop off the spent battery.
RBRC TM is a registered trademark of the Rechargeable Battery Recycling Corporation.
Important
Safety
Instructions
for All Battery
Chargers
SAVE THESE INSTRUCTIONS:
This manual contains important safety and operating
instructions for battery chargers.
• Before using the charger, read all instructions and cautionary markings on the charger, battery
pack and product using the battery pack.
_, WARNING: Shock hazard. Do not allow any liquid to get inside the charger Electric shock may
result.
_ WARNING: Bum hazard. To reduce the risk of injury, charge only DEWALT rechargeable battery
packs. Other types of batteries may overheat and burst resulting in personal injury and property
damage.
WARNING: Under certain conditions, with the charger plugged into the power supply, the charger
can be shorted by foreign material Foreign materials of a conductive nature, such as, but not limited
to, grinding dust, metal chips, steel wool, aluminum foil or any buildup of metallic particles should be
kept away from the charger cavities. Always unplug the charger from the power supply when there is
no battery pack in the cavity. Unplug the charger before attempting to clean.
• DO NOT attempt to charge the battery pack with any chargers other than the ones in
this manual The charger and battery pack are specifically designed to work together
•
•
•
•
•
•
•
ThesechargersarenotintendedforanyusesotherthanchargingDEWALTrechargeable
batteries. Any other uses may result in risk of fire, electric shock or electrocution.
Do not expose the charger to rain or snow.
Pull by the plug rather than the cord when disconnecting the charger. This will reduce the
risk of damage to the electric plug and cord.
Make sure that the cord is located so that it will not be stepped on, tripped over or
otherwise subjected to damage or stress.
Do not use an extension cord unless it is absolutely necessary. Use of improper extension
cord could result in risk of fire, electric shock or electrocution.
When operating a charger outdoors, always provide a dry location and use an extension
cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
An extension cord must have adequate wire size (AWG or American Wire Gauge) for
safety. The smaller the gauge number of the wire, the greater the capacity of the cable, that is,
16 gauge has more capacity than 18 gauge. An undersized cord will cause a drop in line voltage
resulting in loss of power and overheating. When using more than one extension to make up the
total length, be sure each individual extension contains at least the minimum wire size. The following
table shows the correct size to use depending on cord length and nameplate ampere rating. If in
doubt, use the next heavier gauge. The lower the gauge number, the heavier the cord.
•
•
•
•
•
•
•
C
E
B
G
H
Minimum Gauge for Cord Sets
Volts
Total Length of Cord in Feet (meters)
120V
25(7.6)
50(15.2)
100(30.5)
150(45.7)
240V
50 (15.2)
100 (30.5)
200 (61.0) 300 (91.4)
Ampere Rating
More
Than
0
6
10
12
FIG. 1
Not More
Than
6
10
12
16
AWG
18
18
16
14
16
16
16
12
16
14
14
12
14
12
Not Recommended
Do not place any object on top of the charger or place the charger on a soft surface
that might block the ventilation slots and result in excessive internal heat. Place the
charger in a position away from any heat source. The charger is ventilated through slots in the
top and the bottom of the housing.
Do not operate the charger with a damaged cord orplug.
Do not operate the charger if it has received a sharp blow, been dropped or otherwise
damaged in any way. Take it to an authorized service center.
Do not disassemble the charger; take it to an authorized service center when service or
repair is required. Incorrect reassemb/y may result in a risk of electric shock, electrocution or fire.
Disconnect the charger from the outlet before attempting
any cleaning. This will
reduce the risk of electric shock. Removing the battery pack will not reduce this risk.
NEVER attempt to connect 2 chargers together.
The charger is designed to operate on standard 120V household electrical power. Do
not attempt to use it on any other voltage. This does not apply to the vehicular charger.
FIG. 2
FIG. 3
G
H
FIG. 4
FIG. 5
FIG. 6
Chargers
Your tool uses a DEWALTcharger. Be sure to read all safety instructions before using your charger.
Consult the chart at the end of this manual for compatibility of chargers and battery packs.
Charging
Procedure
(Fig. 3)
1. Plug the charger into an appropriate outlet before inserting the battery pack.
2. Insert the battery pack (H) into the charger, as shown in Figure 3, making sure the pack is fully
seated in charger. The red (charging) light will blink continuously, indicating that the charging
process has started.
3. The completion of charge will be indicated by the red light remaining ON continuously. The pack
is fully charged and may be used at this time or left in the charger.
Indicator
Light
FIG. 7
Operation
FIG. 8
c
PACKCHARGING
PACKCHARGED
LEAVING THE BA'n'ERY PACK IN THE CHARGER
The charger and battery pack can be left connected with the charge indicator showing Pack
Charged.
DRILLING
PER(_AGE
TALADRADO
WEAK BA'n'ERY PACKS: Weak batteries will continue to function but should not be expected to
perform as much work.
FAULTY BA'n'ERY PACKS: This charger will not charge a faulty battery pack.
NOTE: This could also mean a problem with a charger.
Important
Charging
Keyless
Notes
1. Longest life and best performance can be obtained if the battery pack is charged when the air
temperature is between 65 °F and 75 °F (18°-24 °C). DO NOT charge the battery pack in an
air temperature below +40 °F (+4.5 °C), or above +105 °F (+40.5 °C). This is important and will
prevent serious damage to the battery pack.
2. The charger and battery pack may become warm to the touch while charging. This is a normal
condition, and does not indicate a problem. To facilitate the cooling of the battery pack after use,
avoid placing the charger or battery pack in a warm environment such as in a metal shed or an
uninsulated trailer.
3. A cold battery pack will charge at about half the rate of a warm battery pack. The battery
pack will charge at that slower rate throughout the entire charging cycle and will not return to
maximum charge rate even if the battery pack warms.
4. If the battery pack does not charge properly:
a. Check operation of receptacle by plugging in a lamp or other appliance;
b. Check to see if receptacle is connected to a light switch which turns power off when you turn
out the lights;
c. Move the charger and battery pack to a location where the surrounding air temperature is
approximately 65 °F-75 °F (18°-24 °C);
d. If charging problems persist, take the tool, battery pack and charger to your local service
center.
5. The battery pack should be recharged when it fails to produce sufficient power on jobs which
were easily done previously. DO NOT CONTINUE to use under these conditions. Follow the
charging procedure. You may also charge a partially used pack whenever you desire with no
adverse effect on the battery pack.
6. Foreign materials of a conductive nature such as, but not limited to, grinding dust, metal chips,
steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger
cavities. Always unplug the charger from the power supply when there is no battery pack in the
cavity. Unplug the charger before attempting to clean.
7. Do not freeze or immerse the charger in water or any other liquid.
if, WARNING: Shock hazard. Don't allow any liquid to get inside the charger. Electric shock may
result.
,t_,WARNING: Bum hazard. Never attempt to open the battery pack for any reason. If the plastic
housing of the battery pack breaks or cracks, return to a service center for recycling.
Storage
Recommendations
1. The best storage place is one that is cool and dry, away from direct sunlight and excess heat or
cold.
2. For long storage, it is recommended to store a fully charged battery pack in a cool dry place out
of the charger for optimal results.
NOTE: Battery packs should not be stored completely depleted of charge. The battery pack will
need to be recharged before use.
SAVE THESE
COMPONENTS
INSTRUCTIONS
(Fig.
FOR FUTURE
USE
1)
i_,WARNING: Never modify the power tool or any part of it. Damage or personal injury could result.
A. Trigger switch
E. Worklight
B. Forward/reverse control button
F. Keyless chuck
C. Torque adjustment collar
G. Battery release button
D. Gear shifter
H. Battery pack
Variable
Speed
Trigger
Switch
(Fig.
Control
Button
(Fig.
1)
A forward/reverse control button (B) determines the rotational direction of the tool and also serves
as a lock-off button.
To select forward rotation, release the trigger switch and depress the forward/reverse control
button on the right side of the tool.
To select reverse rotation, depress the forward/reverse control button on the left side of the tool.
The center position of the control button locks the tool in the off position. When changing the
position of the control button, be sure the trigger is released.
NOTE: The first time the tool is run after changing the direction of rotation, you may hear a click on
start up. This is normal and does not indicate a problem.
Torque
Adjustment
Collar
(Fig.
1)
Your tool has an adjustable torque screwdriver mechanism for driving and removing a wide array of
fastener shapes and sizes. Circling the collar
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.2
Linearized : No
Page Count : 7
Page Layout : SinglePage
Page Mode : UseNone
Producer : Goby Monitor Application version 3, 2, 1, 4
Create Date : Sun Oct 05 07:04:28 2014
Author :
Title :
Subject :
EXIF Metadata provided by EXIF.tools