Diasonic Technology Co DDR6000R Digital Voice Recorder User Manual users manual
Diasonic Technology Co Ltd Digital Voice Recorder users manual
users manual
DIGITAL Voice RECORDER & AUDIO PLAYER FM Radio DDR-6000R User Manual 그림 추가 (제품 빗면 그림) Thank you for purchasing Diasonic DDR-6000R, a digital voice recorder and audio player. manual before using the product. Please read this It is recommended to keep this manual near the product for convenient use. -1- INFORMATION TO THE USER Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void the user's authority to operated the equipment under FCC rules. This device complies with Part 15 of the FCC Results. Operation is subject to the following two conditions: 1 This Device may not cause harmful interface, and 2 This device must accept any interference received, including interference that may cause undesired operation. Preface Thank you for purchasing DDR-6000R manufactured by Diasonic Technology. before using the product. Please read this manual Store this manual in a separate place as this manual contains important information for the operation of the product. does not separately provide a manual. In case the user loses the manual, Diasonic Technology All manuals are provided with the product. Notes ● Do not repair, disassemble, or remodel the product. ● Incorrect use of the product by the user or a third party or static electricity or electric shock loaded on the product may cause loss of or change in the data saved in the product during repair services or replacement of the battery. ● DIASONIC Technology is not responsible for damage caused by change or loss of the data in the product. ● Do not heat up or short the main body or the battery. ● Do not put the battery on a hot item or disassemble the battery in a high-temperature place. Toxic contents of the battery may harm user’s eyes or skin. ● In case the contents of the battery leaks and is exposed to the user, wash the exposed body part -2- with clean water and see the doctor. ● Do not soak the device in water or leave it in a humid place. ● Contents of the user manual are subject to change without prior notice for performance improvement. ● Using the earphones for a long time may compromise user’s hearing ability. Copyrights ● DIASONIC Technology has all copyrights of this user manual. Reproduction, distribution, and commercial use of a part of or the entire user manual without prior consent of DIASONIC Technology are strictly prohibited by laws. All information contained in this manual has been carefully studied and written and is subject to change without prior notice for functional and performance improvement. DIASONIC Technology will not take any responsibility for issues arising due to differences between the product and information contained in the user manual. ● Use of MP3 files is limited to the personal purposes not including commercial or service purposes. Servicing or providing MP3 files for commercial purposes will be against the copyright act of Korea. ● Reproduction of files is prohibited for other than personal purposes by law. -3- Table of Contents -4- Safety Notes ● Do not store the device in any place with following conditions: - High temperature (60℃ or higher) - Exposure to the direct sun rays or a heating device - Inside the car with closed windows (especially, in the summer) - Humid place such as the bathroom ● When removing dust, use soft cloth. Do not use liquid agent (such as thinner or benzene) or wet cloth. ● Do not place a debit card or a bus pass near the speakers. The magnetic interference may occur, which will damage the card. ● Do not place the device near a magnet. The speakers may not function. ● Diasonic Technology is not responsible for any damage caused by the use of this device or damage claim made by a third party. ● Diasonic Technology is not responsible for the loss of data caused by other actions than repair services by Diasonic Technology personnel. ● Do not repair, disassemble, or remodel the device. ● Do not use the product in a place where use of electronic devices is prohibited. ● Do not use this device while driving. ● Do not heat up or short the main body or the battery. ● When using an auxiliary device, leave a gap between the auxiliary device and the main device. ● Incorrect use of the product by the user or a third party or static electricity or electric shock loaded on the product may cause loss of or change in the data saved in the product during repair services or replacement of the battery. -5- Features and Characteristics Diasonic Digital Voice Recorder is a next-generation portable digital recorder equipped with the state-of-the-art technologies. With this digital voice recorder, the user can record and play voice with the best quality in various recording ways – SHQ, HQ, and SP. The device supports various playing methods (including speakers and earphones) as well as diverse file formats including MP3 and WMA. The device can also receive and record FM radio broadcasting. ● Sophisticated, Durable Design Sophisticated, durable design for the maximum convenience of the user. Ultra-slim and ultra-light. ● High-quality Voice Recording and MP3 Player Recording and playing of voice data through a high-quality sampling method such as SHQ, HQ, and SP. MP3 player features (equalizer or repetition) added to the voice recorder. ● Direct Encoding Recording Direct MP3 encoding recording through a connection with an external device. ● Mono and Stereo Microphones ● Flexible Bit Rates The bit rate for the voice recording or line-in and FM radio recording can be changed depending on the occasion and time for the efficient use of the folders. ● FM Radio Reception and Recording ● Automatic Recording System (ARS) The recording process automatically stops when there is no sound, which maximizes the recording time. During line-in recording, cuts and the beginning of the song is automatically detected. When a new song starts, a file is automatically created. ● Mass Storage (64MB/128MB/256MB/512MB/1GB/2GB) ● Plug And Play feature to store or access music files or data through the USB port ● FM band feature to receive FM radio in any place in the world ● Hold feature to temporarily disable the buttons ● Various playing modes (Normal, One, All, Shuffle) ● Repetition feature to repeat a certain node (A↔B) ● Highly sensitive, omni-directional built-in microphones ● Maximum files can be stored in eight folders (in the voice mode) ● Maximum 00 files can be recorded during line-in or FM recording. ● Monitoring feature to listen to the recorded sound during recording ● Various equalizer modes (Normal, Pop, Classic, Jazz, Live, Rock, 3D) ● Continue Folder feature (voice mode) to store the file in the next folder when the current folder is full of files -6- Parts and Configuration Main Body Speaker Earphone Jack MIC Line-in Jack Menu Button Play Button Erase Button USB Jack Hold Switch Battery Cover LCD LCD FM FREQUENCE Mode Battery Status Folder Index REC Quality Play Time -7- Components Stereo Earphones / User Manual / WIN98SE Driver Installation CD / USB Cable / Hand Grip / Antenna / External Microphones / Battery (1EA) / External Device Connection Cable / Telephone Cable / DC Adapter Battery Replacement ① Open the battery cover by turning it counterclockwise. ② Insert LR03-type AAA battery in the right direction in the battery compartment, and close the cover by turning it clockwise. Checking the Remaining Battery Check the battery status with the battery icon on the upper-right corner of the LCD. When the battery is empty, replace the battery. Remaining display No remaining ※ Note If the full-battery icon is not displayed after a new battery is inserted, check whether the battery has been correctly inserted. If the battery is correctly inserted, immediately remove the battery and contact Diasonic Technology for repair. -8- Battery Hours (at Normal Temperature) Earphones Battery Recording (Volume: Middle) Speaker Playing Earphones Playing (Volume: Middle) (Volume: Middle) Alkaline Battery Approximately 00 Approximately 00 Approximately 00 Size ‘AAA’ LR03 hours hours hours Notes ● Do not mix different types of the batteries. ● In case of not operating the device for a long time, remove the battery from the body. Otherwise, the battery may be naturally consumed. ● Use only Alkaline batteries. Other types of the batteries may cause malfunctioning of the device. Adapter Connect the adapter to the USB port. The device is not charged through the adapter. Use a proper type of the adapter for the device model. (Some models do not provide separate adapters.) -9- Basic Operation Turning On/Off Power ● Turning On the Power Press Play button for 0 seconds to turn on the power. ● Turning Off the Power Press Play button for 0 seconds to turn on the power. Hold Switch Before using the player, check whether the hold switch is disabled. ● Hold Switch Enabled Move the hold switch to On position. When the hold switch is already enabled, the switch will not move to On direction. ● Hold Switch Disabled Move the hold switch to Off position. Mode Conversion Shortly press the menu button to enter Voice, FM, and Music mode. Menu Conversion Press the menu button long to select menus of the Voice, FM, and Music menus. To exit the menu, press the menu button again. Volume Adjustment Adjust the volume with the play button. Keep pressing the play button to continuously adjust the volume. The volume levels are from 0 to 30. When the power is turned on, the default volume will be set. (See the Menu Setup.) - 10 - Recording With the voice recorder, the user can record not only voice but also other various music sources from cassette, MD, MP3 player, audio, telephone, mobile phone, and FM radio. ● Various Input The user can record audio data not only from the internal microphone but also from external microphones and external devices connected through the line-in port. microphone or line in the voice menu. In case of line-in connection, select the external (See the Menu Setup.) ● Recorded Data Storing Folder There are eight voice folders in addition to the FM folder and the line folder. from these folders. The user can select the files (See the Menu Setup.) ● Automatic Recording System (ARS) While the ARS is enabled, the audio will be recorded only when there is sound during voice recording or recording from an external device through the line-in port. (See the Menu Setup.) When the conversation or music stops, the player will enter standby state. To stop the automatic recording, press the ARS button. ● Recording Quality Setting The user can change the recording quality (R_QTY.) (See the Menu Setup.) The higher recording quality, the less recording time. ※ The recording time may differ depending on the recording mode. Model DDR-6000 (064Mb) DDR-6000 (128Mb) DDR-6000 (256Mb) DDR-6000( 512Mb) SHQ: 260 min SHQ: 530 min SHQ: 1060 min SHQ: 2120 min HQ: 520 min HQ: 1060 min HQ: 2120 min HQ: 4240 min SP: 1040 min SP: 2120 min SP: 4240 min SP: 8480 min Voice Recording Time ● Recording Monitoring To listen to the recorded data, use the earphones. ※ Caution ★ When the folder is full, recording will not be made. ★ When the recording number exceeds 99 in one folder, recording will not be made. - 11 - Voice Recording With the voice recorder, the user can record conversations and lectures. under Voice folder and the file name format is MIC001_SHQ.MP3. The recorded files are stored By accessing the PC, the user can check the files. ① Select the DIR in the Voice menu, and select the folder. (See the Menu Setup.) ② Select R_QTY in the Voice menu and the recording quality. (See the Menu Setup.) ③ Press the Recording button. For the first five seconds after the recording starts, the user cannot stop recording. ※ Note - When the voice recorder is far away from the microphones or sound is low, the recording quality is poor. Place the sound microphones and the voice recorder close each other. Recording Data from External Device Record files from an external source is stored under Line folder, and the file name format is Line001_SHQ.MP3. By accessing the PC, the user can check the files. ※ Caution ★ To record sound, set the volume of the voice recorder at the middle position. volume during recording. Do not change the When the volume is set high, noise may occur. ★ Before accessing the voice recorder from an external device, turn off both the voice recorder and the external device. ★ Before connecting an external device and the voice recorder, read the manual of the device. 수정해야함 - 12 - ● Recording from External Device By connecting an external device through the Line-in cable, the user can record sound sources from the cassette, MD, MP3 player, and the stereo set. Set the volume of the external device properly before starting recording. ① Connect the external microphones to the Line-in port. ② Change S_SEL in the Voice menu into Line. (See the Menu Setup.) ③ Select R_QTY in the Voice menu and the recording quality. (See the Menu Setup.) ④ Press the Recording button. ● Connecting External Microphones By connecting external microphones, the user can record sound sources from a remote place. recording through external microphones, built-in microphones will not function. ① Connect the external microphones to the Line-in port. ② Select S_SEL in the Voice menu as E_MIC. (See the Menu Setup.) ③ Select the external microphone type – Mono (MO) or Stereo (ST.) (See the Menu Setup.) ④ Select R_QTY in the Voice menu and the recording quality. ⑤ Press the Recording button. ● Recording from Telephone The user can record the telephone conversations. ① Connect the Line-in cable to the Line-in port of the voice recorder. ② Connect the telephone line to the telephone adaptor. ③ Connect the telephone cord to the telephone adapter and the telephone unit. ④ Change S_SEL into E_MIC in the Voice menu. (See the Menu Setup.) ⑤ Select MO as the external microphone type. (See the Menu Setup.) ⑥ Select R_QTY in the Voice menu and the recording quality. (See the Menu Setup.) ⑦ Press the Recording button to start recording. - 13 - (See the Menu Setup.) During ● Recording from Mobile Phone (Option) The user can record the mobile phone conversations through the earphones. ① Connect the mobile phone and the voice recorder through the Line-in port and the earphone jack of the mobile phone. ② Change S_SEL into E_MIC in the Voice menu. (See the Menu Setup.) ③ Select MO as the external microphone type. (See the Menu Setup.) ④ Select R_QTY in the Voice menu and the voice quality. (See the Menu Setup.) ⑤ Press the Recording button to start recording. FM Recording The user can record FM radio broadcasting. Recorded files are stored in the recorded order. FM radio broadcasting recorded files are stored under the FM folder, and the file name format is FM001_SHQ_1077.MP3. By accessing the PC, the user can check the files. ① Select the frequency in the FM mode. ② Select R_QTY in the FM menu and the recording quality. (See the Menu Setup.) ④ Press the Recording button. ※ Note - When recording in an area with poor reception or indoors, noises may occur. When this happens, move to place with better reception. - The earphone cable functions as an antenna. Unfold the cable as long as possible. - For the best sound quality, listen to the FM radio through earphones. the antenna provided with the voice recorded to the earphone jack. - 14 - To use speakers, connect Playing After entering Voice or Music mode, the user can search files to play by pressing the Play button right and left. The user can play the file in various modes at various quality by selecting Repeat and EQ in the Menu Setup. ※ The Voice mode does not support EQ feature. Voice Playing ① Select the Voice mode. ② Select DIR in the Voice menu, and go to the wanted folder. (See the Menu Setup.) ③ Select the file by pressing the Play button right and left, and press the Play button again. Music Playing ① Select the Music mode. ② Select the file by pressing the Play button right and left, and press the Play button again. A↔B Node Repetition The user can set a node while playing a voice or music file, and repeat the node. ① During a file is being played, press the Erase button at the starting point of the node. Then, the repetition icon ( A↔ ) will be displayed on the LCD. ② Press the Erase button again at the end of the node. Then, the repetition icon ( A↔B ) will be displayed on the LCD. ③ The node will be repeatedly played. To stop repeated playing, press the Erase button. - 15 - Playing Next File and Fast Forwarding Button Key Stop Playing Selects the next file. Selects and plays the next file. -- Automatically adds next files to select. Fast forwards the current file. Operation Goes back to the beginning of the file 5 seconds after the playing starts. Selects the previous file. Selects and plays the previous file within 5 seconds after the playing starts. -- Automatically reduces previous files to Rewinds the current file. select. FM Radio Reception Enter the FM mode by pressing the Menu button. In the FM menu, the user can change the FM band to the American, Japanese, and European band. FM Reception Mode By pressing the Play button, the user can select Radio mode and Preset mode. Radio Mode PRESER Frequency Selection By moving the Play button right and left in the Radio mode, the user can change the frequency. By pressing the Auto Seek button for 0 seconds right and left, the user can search frequencies. In an area with poor reception, the Auto Seek feature may not function. manually adjust the frequency. Storing Preset Channel ① Select the frequency in the Radio mode, and press the Erase button. ② Move the Play button right and left and select the Preset channel. ③ Press the Erase button to store the channel. - 16 - In this case, the user can Storing Auto Preset Channels The user can have maximum 20 FM frequencies automatically searched and stored. To use this feature, press the Erase button long. Preset Channel ① Select the Preset mode by pressing the Play button. ② By moving the Play button right and left, the user can listen to the stored channels. Deleting Preset Channels ① Select the preset channel by moving the Play button right and left in the Preset mode. ② Press the Erase button. Then, “DEL” will be displayed on the LCD. ③ Press the Erase button again to delete the channel. If the user presses other buttons, the channel will not be deleted. Deleting Files The user can delete unnecessary files and folders form the voice recorder for more efficient folder management. ※ Please note that the deleted files and folders cannot be recovered. Deleting Files The user can delete unnecessary files. ① Select a file to delete, and press the Erase button. ② “Erase” will be displayed on the LCD. ③ Press the Erase button again to delete the file. If the user presses other buttons, the file will not be deleted. ※ After a file is deleted, remaining files will be sorted again. - 17 - Deleting a Folder The user can delete an entire folder. ① Select the folder to delete, and press the Erase button long. ② “Erase” will be displayed on the LCD. ③ Press the Erase button again to delete the folder. If the user presses other buttons, the folder will not be deleted. Deleting All Files The user can delete all files stored in the voice recorder. ① Select the FMT (format) in the menu, and press the Play button. ② Select “Yes” and press the Play button. ③ Then, all files will be deleted. - 18 - Menu Setup By setting up the menus, the user can use various features more efficiently. To set up menus, press the Menu button long. Menu Selection ① Move the Play button up and down and select a menu item. ② Press the Play button to apply the selected menu item. ③ Press the Menu button to select a higher menu or to exit the Menu mode. Menu Tree Music Mode Voice Mode Radio Mode REP DIR Band EQ R_QTY R_QTY FMT ARS FMT D_VOL REP P_OFF FMT S_DEF S_SEL F_INF MIC_S M_INF - 19 - Menu Band (FM Band Setting) The user can select one of the following FM bands: USA: 87.5MHz~108.0MHz (100KHz STEP) JRP: 76.0MHz~108.0MHz (100KHz STEP) EUP: 87.50MHz~108.00MHz (50KHz STEP) R_QTY (Recording Quality Setting) When recording voice or FM radio broadcasting or through the Line-in cable, the user can set the bit rate: SHQ: High HQ: Middle SP: Low FMT (Folder Format) The user can delete all data in the folder. Before using this feature, check the battery is full. (Do not remove the battery during formatting. Otherwise, a breakdown may occur.) Yes: Format the folder. No: Do not format the folder. DIR (Folder Setting) Select Voice_A ~ Voice_H, FM, and the Line folder to move to the selected folder. Automatic Recording System Setting While the ARS is enabled, the user can record sound only from the built-in microphones, external microphones, of the Line-in port. Yes: ARS enabled. No: ARS disabled. - 20 - REP (Reception Method Setting) The user can play the folders in the same folder in the following ways: NOR: To play the files once in order. ONE: To repeat the current file. ALL: To continue playing all files in order. SHUFF: To randomly play all files in the folder. S_SEL (Input Setting) The user can set the external device through the Line-in port. Line: To use the MD, cassette, or MP3 player as the sound source. E-MIC: To select the microphone type – Mono or Stereo. MO: Mono ST: Stereo MIC_S (Microphone Sensitivity Setting) The user can set the sensitivity of the microphones – Mid or High. EQ (Equalizer Setting) The user can set the equalizer mode – NOR (NORMAL), POP, CLA (CLASSIC), JAZ (JAZZ), LIV (LIVE), ROC (ROCK), or 3D (3D Sound). D_VOL (Reference Volume Setting) To prevent too high sound upon user’s turning on the voice recorder, the previous volume is kept for the next playing if it is lower than the default volume. If the previous volume is higher than the default volume, the default volume will be used upon user’s turning on the voice recorder. 10~20: Set the default volume. P_OFF (Automatic Power-off Time Setting) If the voice recorder is not used for a long time, will be automatically turned off after a certain time. However, if the user disables the automatic power-off time, the voice recorder will be always on. 1, 3, 5 MIN: To automatically turn off the voice recorder after 1, 3, o4 5 minutes. Off: The voice recorder is not automatically turned off. - 21 - S_DEF (Default Menu Values Setting) The user can call the factory menu setup. Yes: To call the factory menu setup. No: Not to call the factory menu setup. F_INF (Version Information) The user can view the FW version. V_100: Version information R_027: Release information M_INF (Folder Information) The user can check the total folder size and the currently used folder size. As some operations of the voice recorder require folder data, the folder capacity and the total capacity may differ. M0000: Total capacity U0000: Used capacity - 22 - PC Connection The user can connect the voice recorder to the PC through the provided USB cable and use the folders of the voice recorder as a USB driver. (However, in case of Windows 98SE, a separate USB driver is needed.) The voice recorder is equipped with the USB mass storage feature and can be used as a hard drive. The user can connect the voice recorder to the PC in which Windows ME, 2000, or XP, not Windows 98, is installed by plug-and-play method without installing special software. PC Connection ① Connect the USB cable to the USB port at the side of the voice recorder. ② Connect the other end of the USB cable to the PC. Windows ME, 200, and XP automatically detects the voice recorder. Installation of WINDOW 98 SE Driver ① Download Win98 SE driver to C:W of the PC from the web site of Diasonic Technology. ② Double-click on install.bat file under the downloaded directory. After installation, close the window and reboot the PC. - 23 - ③ After the PC is rebooted, connect the voice recorder to the PC using the USB cable. Select “Search Driver (Recommended) in the Hardware Installation Wizard, and click on the [Next] button. ④ When “Unknown Device” is displayed, click on the “Next” button. ⑤ Select “Location” field and click on [Browse] button. ⑥ When the [Browse] button appears, select the directory (Win98SE Driver) downloaded from the web site and click on [OK] button. ⑦ When the device name is displayed, click on the [Next] button. ⑧ After the driver is installed, click on the [Finish] button. - 24 - ⑨ Now, the device has been installed. ⑩ Check the installation state. [My Computer] - [Control Panel] - [System] - [Device Manager] - [Hard Disk Controller] Disconnecting the USB Port Before removing the voice recorder, disconnect the cable first. Otherwise, the data may be lost or damaged. ① Close all files. When a file or folder is open, the voice recorder will not be properly removed from the PC. ② Left-click on the icon ( ) displayed on the lower-right corner of the screen. ④ When the following message appears, separate the voice recorder from the PC. - 25 - Folder and File Management When the voice recorder is connected to the PC, the recorder will be recognized as a portable disk. In the portable disk drive, FM, Line, Music, and Voice folders are created. The user can create folders and write, read, and delete files in the voice recorder like in the portable hard disk. The user can also format the portable disk. 수정해야함 Music Folder The user can create folders and manage music files. The user can copy the entire folder with belonging files. The folders are numbered in order of being copied from the PC. Maximum 00 music files can be numbers. Line Folder Under the Line folder, the files recorded through the Line-in port are stored. be created in order. Line001_SHQ.MP3 Mode Recording No. Recording Quality - 26 - Maximum 00 recorded files can FM Folder Under the FM Radio folder, the FM radio broadcasting recorded files are stored. Maximum 00 recorded files can be created in order. FM001_SHQ_1077.MP3 Mode Recording No. Recording Quality Recording Frequency Voice Folder Under the Voice folder, the voice recorded files are stored. order. Total 00 files can be stored in a single file from Voice_1 to Voice_8. MIC001_SHQ.MP3 Mode Maximum 000 recorded files can be created in Recording No. Recording Quality - 27 - Firmware Upgrade By upgrading the firmware, the user can improve performance of the voice recorder and correct errors in the recorder. * The user can download free firmware upgrade files from the web site of Diasonic Technology. Ater downloading the upgrade file, copy the file to the Root directory of the voice recorded connected to the PC. Disconnect the recorder, and turn off the power. Turn on the power. Then, the firmware will be upgrade. * Before upgrading the firmware, move the dat to the PC and format the disk in the Set memory. Disconnecting from the PC and upgrading the firmware ※ After the firmware is upgrade, the LED will be changed in the orange color. Remove the battery and insert it again. - Replace the battery before using the voice recorder. breakdown may occur.) - 28 - (Do not remove the battery during upgrading. A Troubleshooting When a breakdown is suspected, please check the following: Symptom The power is off. The player suddenly stops. The adapter does not function. Things to Check Check if the hold switch is in On position. Move the hold switch to Off position. Check the battery state. Replace the battery. Check the insertion of the battery. Check the polarity of the battery. Remove the battery. Insert the battery again. Check if the adapter is correctly connected to Correctly connect the adapter to the the outlet. outlet. Check if the suitable input power is supplied. Check if DC port is correctly connected. Check if the hold switch is in On position Check if there are already 99 recorded Recording is not made. files. microphone is not made. outlet. Move the hold switch to Off switch. Delete unnecessary files. Replace the battery. E_MIC in the menu. Check whether the external microphone Set S_SEL (input setting) as E_MIC. Set E_MIC of S_SEL (input setting) proper for the external microphone type. Check whether S_SEL (input setting) is device is not made. Line in the menu. is not made. Correctly connect the DC port to the Check the remaining battery state. Recording from an external telephone or mobile phone designated voltage. Delete unnecessary files. is mono or stereo. Recording from a Connect the adapter to an outlet with Check the available folder size. Check whether S_SEL (input setting) is Recording from an external Measures Set S_SEL (input setting) as Line. Check if S_SEL (input setting) is set as Set S_SEL (input setting) as MO of MO of E_MIC in the menu. E_MIC. Check if the ASR is set Yes in the menu. Set the ASR Yes. Move the internal or external The ASR does not function. When the audio volume is to low, the microphones close to the recorder. audio will not be recorded. Increase the volume of the external device. The player does not play Check if there is a recording file or music Check the number of files in the the audio. file. current mode. - 29 - The speakers do not Check whether the earphones are generate sound. connected. The earphones do not Check whether the earphones are generate sound. connected. Disconnect the earphones. Connect the earphones. The FM radio reception is poor in the The device and the earphones The player does not frequency shadow areas, inside the function as antennas. receive radio broadcasting. building, in the subway, and on a moving device and earphones for better vehicle. reception. Check if the OS is Windows 98. Install Windows 98 driver. Check if the USB cable is correctly Correctly connect the USB cable to the connected to the player. player. Files recorded in the PC No separate PC program other than Install Windows Media Player or are not played. Windows 98 driver is provided. another player. Automatic connection is not made to the PC. - 30 - Move the Specifications Model DDR-6000R Mode MP3 Format 32Kbps / 16Kbps FILE Voice: 99ea/ MP3 FM Record Stereo (87.5MHz~108MHz) Mic Built-in Mic / Line (external Mic) S/N 45db (50dB input 1KHz, speaker Output 200mW)75KHz Distortion 3%±0.2 (dB input 1KHz, speaker Output 100mW: HQ mode) Freq. Response 400Hz~3.2KHz (-6dB) Output Power Max 8mW (Stereo earphone 16ohm) S/N 45dB at 1mv 98.1MHz FM Distortion 0.8%(max) at 1mv 98.1MHz ∆f=22.5KHz Radio Freq, Response 350Hz±30Hz, 3KHz±0.25KHz (150Hz~2.5KHz,60dBuV) (stereo) Frequency range Voice RECORD/ Play MP3 WORLD: 87.5 ~ 108MHz JAPAN: 76 ~ 108MHz Preset Mode 20 Radio station Bit/rate 16Kbps~320Kbps (MPEG 1/2 LAYER 3) S/N 85dB (1KHz input 0db) Distortion 0.3%±0.05 (1KHz input 0db) Freq, Response 20Hz~20KHz Earphone Max 8mw (16ohm) Format MP3, WMA communication USB 1.1 System CPU 200MHz more than, RAM 64MB more than, 20MB of free space OS Windows98SE, Windows2000, Windows ME, Windows XP Sound card Sound blaster 16 compatible Display 640 * 480 more than Diameter ∮16(IMP 8Ω) Max output 200mw (Volume max) PC Interface Speaker ADAPTOR DC 5V / 200mA(CE, CUL, T, FCC) POWER requirement 1.5V AAA Battery Size - 31 - Product Warranty ● Repair Service When a breakdown occurs, stop using the product and contact the sales agency or the service center of DIASONIC Technology at 82-031-474-0852. ● Warranty (Service Policy) Free repair services will be provided in compliance with the free repair policy of DIASONIC Technology. If a breakdown occurs during the warranty period, bring the product with the warranty card to the sales agency or the service center of DIASONIC Technology. Free repair service will be provided only when the purchase date and the name of the sales agency appear on the warranty card. sale agency. Please check all information is written when purchasing the product from the The warranty card is not reissuable so we recommend you keep it safe.1. This product has passed strict quality control and inspection. 2. Breakdowns occurring under normal operating conditions described in the user manual within the warranty period will be subject to free repair services. 3. For the following cases, some service fees will be charged: 1) When the customer fails to submit the warranty card 2) When information is missing in the warranty card – purchase date or the name of the sales agency 3) When the product is damaged or broken down due to user’s mishandling 4) When the product is damaged or broken down due to user’s repair or remodeling 5) When the product is damaged or broken down due to fires, pollution, earthquakes, and other natural disasters 6) When the product is damaged or broken down due to leakage of the battery 7) When the consumable parts such as a battery need to be replaced 4. This warranty card is valid only for the service in Korea. (Request for Mailing) Please beware of the following when sending the product by mail: 1. Please enclose the warranty card with the product when mailing during the warranty period. 2. Please wrap in shock-absorbing materials and put the product in a box to prevent damage during transportation. Mailing fees and wrapping costs are to be born by customers. 3. To prevent loss, please send the product for repair services by registered mail. - 32 - Warranty Card Product: Voice Recorder Model: DDR-6000 Warranty Period: One Year Purchase Date: ____ _______, _________ Name Purchaser Address Telephone Name Seller Address Telephone ● Please contact the sales agency or customer center of DIASONIC Technology Co., Ltd. for breakdown of the product. ● Exchange, (charged or free) repair services, refund, and part-keeping periods comply with regulations of the customer protection act. ● For questions or more information about the product, contact the customer center of DIASONIC Technology Co., Ltd. Diasonic Technology ● Address: 321-43, Seoksu-dong, Manan-gu, Anyang-si, Gyeonggi-do (430-040), South Korea The warranty card is only valid in Korea. Please keep this card for free repair services. - 33 -
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No XMP Toolkit : 3.1-702 About : uuid:2bcec02a-5b7c-4b6d-8578-22efb7d58441 Producer : Acrobat Distiller 5.0 (Windows) Create Date : 2006:08:04 00:50:11Z Modify Date : 2006:08:11 16:18:29-04:00 Metadata Date : 2006:08:11 16:18:29-04:00 Creator Tool : PScript5.dll Version 5.2 Document ID : uuid:22e17de8-b270-4f46-af56-e81f0ae423f5 Instance ID : uuid:27f0eb97-bde5-482c-a92c-389f3f77fa7c Format : application/pdf Creator : Owner Title : Microsoft Word - DDR-6000R .......... ...._Eng_.doc Page Count : 33 Author : OwnerEXIF Metadata provided by EXIF.tools