Diasonic Technology Co DHD1000 HDD MP3 User Manual HELP Eng

Diasonic Technology Co Ltd HDD MP3 HELP Eng

Contents

Revised user manual

User Manual Hard Disk-type MP3 Player DHD-1000 Thank you for purchasing Hard disk-type MP3 Player of DIASONIC Technology. - Please read this manual before using the product.
2 Thank you for purchasing DIASONIC DHD-1000. Please read this manual before using the product. In case a breakdown occurs, contact the service center at (82)-31-4740852. Notes: ● Do not repair, disassemble, or remodel the product. ● Incorrect use of the product by the user or a third party or static electricity or electric shock loaded on the product may cause loss or change of the data saved in the product during repair services or replacement of the battery. We recommend you to write down important information on paper. ● DIASONIC Technology is not responsible for damage caused by change or loss of the data in the product. ● Do not heat up or short the main body or the battery. ● Do not put the battery on a hot item or disassemble the battery in a high-temperature place. Toxic contents of the battery may harm user’s eyes or skin. ● In case the contents of the battery leaks and is exposed to the user, wash the exposed body part with clean water and see the doctor. ● Do not soak the device in water or leave it in a humid place. ● Contents of the user manual are subject to change without prior notice for performance improvement. Copyrights ● DIASONIC Technology has all copyrights of this user manual. ● Reproduction, distribution, and commercial use of a part of or the entire user manual without prior consent of DIASONIC Technology are strictly prohibited by laws. ● All information contained in this manual has been carefully studied and written and is subject to change without prior notice for functional and performance improvement. DIASONIC Technology will not take any responsibility for matters arising due to differences between the product and information contained user manual. ● Use of MP3 files is prohibited for other than personal purposes like commercial or service purposes. Servicing MP3 files or providing MP3 files for commercial purposes will be against the copyright law of Korea. ● Reproduction of files is prohibited for other than personal purposes by law. This device has been developed for home users and passed the electromagnetic interference test. This device can be used in residential areas and other places. MIC User Notice for Level B Device (IT Device for Home Users) Preface
3 Warning ● When the LCD is broken, do not touch liquid from the LCD. If your eyes have contacted the liquid, wash your eyes with clean water and see the doctor. ● Before charging the product, please thoroughly read the user manual. ● Before using the product, please thoroughly read the user manual. Earphone-related Warning For Traffic Safety ● Do not wear earphones while riding bicycle or motor cycle or driving a car. It may cause dangerous situation and can be illegal in some countries. Listening to music at a loud volume while crossing the road is especially dangerous. For Protection of Hearing Ability ● Do not use earphones at a loud volume. Doctors say listening to music at a loud volume for a long time is harmful for your hearing ability. ● When you hear echo sound in your ears while using earphones, immediately lower the volume or stop using the earphones. Safety Notes
4
5 6 …………………………………… Operational Notes 8 …………………………………… Functions and Features 9 …………………………………… Parts and Components 12 …………………………………… Basic Operation 14 …………………………………… Button Manipulation 18 …………………………………… FM Radio Reception 19 …………………………………… Mode Menu 22 …………………………………… Main Menu 29 …………………………………… Recording 30 …………………………………… Connecting External Devices 31 …………………………………… Installing Drivers and Uninstalling Devices 33 …………………………………… Connecting to the PC 34 …………………………………… Management of Folder and File 36 …………………………………… Firmware Upgrade 37 …………………………………… Troubleshooting 38 …………………………………… Specification Table of Contents
6 General Operational Notes Do not leave the device under direct sun rays or near a heating device. This product is equipped with Li-polymer battery and the product may explode when exposed to heat. Do not leave the device in a humid, dusty place such as a bathroom. Touch the power plug only with dry hands. (Otherwise, an electric shock may occur.) Disconnect the power plug during thunder and lightning. (Otherwise, a fire may occur.) Do not repair, disassemble, or remodel the product. In this case, the product will not be subject to free repair services. Do not forcefully bend the power cord or put a heavy item on the power cord. Keep the device away from a place with severe vibration or a strong magnet. (Music-playing might be interfered.) Incorrect use of the device by the user or a third-party, or static electricity and electric shock loaded to the device may cause change or loss of the data during repair or replacement of the battery. When over-heating is suspected during charging, remove the device from the charger. Leaving the device in the charger for a long time can cause overheating that will result in fire. Do not drop the device or give strong shock to the device. Otherwise, a breakdown may occur. Operational Notes
7 Do not put excessive load on LCD. Otherwise, the LCD may be damaged or display defects may occur. Do not put an item with liquid contents such as cups, cosmetic bottles, or medicines on the player. (Otherwise, a breakdown may occur.) Do not spray water in each part of the player when cleaning the player. Use dry cloth when cleaning the player. Chemicals and detergent will damage and discolor the surface of the player. Never use these agents. Do not use the player in a place where use of electronic devices is banned. Do not use the player while driving. Do not connect several power plugs to the same outlet. For safety, use the adapter provided with the player. Notes on Using HDD Sudden disconnection of the player from the PC while the HDD of the player is operating may cause malfunctioning of the HDD or data loss. Please check that the HDD is not running before disconnecting the player from the PC. Notes on Using Host Function Keep the player away from objects with a strong magnetic field like magnets. Otherwise, the HDD may malfunction or data loss may occur.. When disconnecting the player from the PC, use “Safely Remove Hardware” or “Remove or Eject Hardware” function. We recommend users to back up important data. DIASONIC Technology will not be responsible for data loss during repair services Shocks given to the player while the player is being connected to the PC or the reading the HDD can severely damage the HDD. Free repair service may be provided depending on the damage degree.
8 ● Excellent sound quality Provides the best sound quality with 10mW of high output, less than 0.1% of distortion rate, and -90dB of minimum noise. ● 1.8” color LCD supporting 65,000 colors ● USB host function to copy data without passing through the PC Supports USB Host function to transmit data from other USB devices and back up data saved in the digital camera or portable storage. ● Supporting UMS-type USB 2.0 and USB 1.1 Connects to the PC without installation of special driver. Supports USB 2.0 interface and 480Mbps of the maximum rate. Perfectly compatible with USB 1.1. ● High-capacity HDD Supports high-capacity HDD so that the user can save large-sized data, photos, documents, and music files. ● Media SYNC function (with lyrics) MP3 player displaying lyrics When an LRC file with lyrics is played, the lyrics are also displayed. ● Image and text viewer The user can view images and text on the player. The user can receive data from the digital camera through USB Host function and view received images and photos on the player. The user can view any text file such as lyrics or novels on the player in any place at any time. ● 3D sound High-quality magnificent sound effect thanks to SRS WOW effects SRS and TruBass feature that is to complement middle and low tones are provided so that the player can provide the best-quality sound. ● FM radio Convenient features – automatic FM radio channel selection, FM radio recording, and frequency memory. The user can listen to FM radio at the best quality thanks to the advanced setting features in any place at any time. ● Voice recording and direct encoding The player is equipped with high-performance microphone and provides bitrate-adjusting feature so that the user can record the voice at the best quality. The user can also encode data saved in an external device into an MP3 file through the line-in cable. With SYNC, the user can encode each title. ● Supporting various formats The player supports not only MP3 format but also other formats – WMA and OGG. ● Bookmark and WINAMP play list The user can produce and edit his/her own play list with Bookmark function. The user can quickly replay songs contained in the play list edited in WINAMP (M3U). ● USB charging The user only needs to connect the USB port for charging. ● Wireless/Wired Remote Controller The user can control the player with wired/wireless remote controllers in any lace. ● Various features Various features are supported – Repeat, Adjust Playing Speed, Intro, Multi-language, and ID3 Tag. Supports Repeat, Equalizer, Firmware Upgrade features. Functions and Features
9 Main Body Wire Remote Controller IR Remote Controller Parts and Components
10 Package Components
11 LCD ● MP3 Player ● Record ● FM ● LED Charging HDD Active
12 1. Turning On/Off Power Press Play button for a second to turn on the power. After the power is turned on, press Stop button for a while to turn off the power. After power is supplied from an [eternal power source (USB or adapter)], the charging status will be indicated by the LED. Then, press Play button to enter into Charging mode. If charging is being made, the battery level symbol will blink. Press Play button again to enter into normal operation status. 2. Lock Switch When the lock switch is on (or on the right side), the switch will not function. 3. Main Menu Press Menu button for a while, and select the main menu by pressing VOL+, VOL-, FF, and REW buttons. After selecting the menu, press Play button. To cancel menu selection, press Menu button, and to exist Mode menu, press Stop button. 4. Adjusting Volume The user can adjust the volume by pressing VOL+ or VOL- button, and continuously adjust the volume by pressing each button for one second or more. 5. Repeat While playing a song, shortly press A↔B button. Then, the starting point (A) will be defined, and Repeat icon (A↔) will blink on the LCD. Press A↔B again to define the ending point (B). Repeat icon (A↔B) will be displayed on the LCD. The user can turn off Repeat function by pressing A↔B button again. 6. Adjusting Playing Speed 7. Selecting SRS The user can select SRS by pressing SRS button while a song is played in Music Box, Search Play, or Record (Encode or Voice Record) mode. Play List Music Box Search Play FM Radio Text Record USB Data User Folder * Volume levels are from 0 to 30. * When the player is turned on, the volume level will be at 10. Basic Operation
138. Setting Bookmark To bookmark an MP3 or WMA file, press SRS button shortly in Stop mode. Bookmark function is available only in Music Box mode. 9. Recording Recorded file will be saved under different folders depending on the mode when the user presses Recording button. If the user connects line-in cable while recording voice, voice will be recorded till the user presses Stop button. While the line-in cable is connected, the user cannot enter into FM mode. Although the user disconnects the cable during line-in recording, line-in recording will not stop. The player provides a monitoring function with which the user can listen to the recorded contents through the earphone while recording voice. The memory space (Total time : Remaining time) will be displayed in %. * Encode - When the line-in cable is connected to the player, line-in recording will be automatically made and the recorded file will be saved under Encode folder. - The user can record radio broadcasting by pressing REC button while listening to radio, and the recorded file will be saved in Encode mode. * Voice Encode When the user records voice without a line-in cable connected, the recording will be made by the built-in microphone and the recorded file will be saved under Voice folder. The recorded file can be replayed under Voice folder in Record mode, and maximum 1,000 files can be recorded and saved. 10. Host Function The user can copy data from an external device to the player with Host function. Connect the USB 1.1 host port to the external device through the USB host cable. The data saved in the external device will be displayed.
14 ● Music Box Mode Button Key Function When Stopped While Playing Short Plays the current track. Pauses playing the current track. Play/Pause Long Plays the previous part. (Intro scan) Plays the previous part. (Intro scan) Short Goes to the lower folder. Plays the next track. FF Long Automatically goes to the next-lower folder. Fast-forward the current track. Short Goes to the upper folder. After 5 seconds: Plays the track from the beginning. Before 5 seconds: plays the previous track. REW Long Automatically goes to next-upper folder. Rewinds the current track. Short Enters into Mode menu. Starts navigation. Menu Long Enters into Main menu. Enters into Main menu. Short Converts to the previous track. Increase the volume. Volume + Long Automatically converts to the previous track. Automatically increases the volume. Short Converts to the next track. Lowers the volume. Volume - Long Automatically converts to the next track. Automatically lowers the volume. Short × Activate/Deactivate Repeat function. A↔B Long × Adjusts the playing speed. SRS Short Change SRS. Change SRS. REC Long Starts recording. × Short × Stops playing the current track. Stop Long Turns off the power. Stops playing and turns off the power. Button Manipulation
15● FM Radio Mode Button Key Function Frequency Mode Preset Mode Preset Mode Short Adjusts the FM frequency. Converts to the next preset channel. Increases the channel. FF Long Automatically seeks FM channels (+). Automatically increases the channel. - Short Adjusts the FM frequency. Converts to the previous channel. Lowers the channels. REW Long Automatically seeks FM channels (-). Automatically lower the channel. - Short Increases the volume. Increases the volume. Increases the volume.Volume+ Long Automatically increases the volume. Automatically increases the volume. Automatically increases the volume.Short Reduces the volume. Reduces the volume. Reduces the volume. Volume- Long Automatically reduces the volume. Automatically reduces the volume. Automatically reduces the volume. Short Enters into Preset menu. Saves the frequency. × SRS Long Enters into Preset mode. × Calls the frequency. A↔B Automatically searches frequencies and preset the searched frequency. × × REC Long Starts recording. Starts recording. Starts recording. Stop Long Turns off the power. Turns off the power. Turns off the power.
16● Record Mode Button Key Function When Stopped While Playing During RecordingShort Starts to play the current file. Stops playing the current track. (Pause) × Play/Pause Long Plays the previous part. (Intro scan) Plays the previous part. (Intro scan) × Short Converts to the lower folder.Converts to and plays the next file. × FF Long Automatically converts to the lower folder. Fast-forward the current track. × Short Converts to the upper folder. After 5 seconds: Plays the track from the beginning. Before 5 seconds: Converts to and plays the previous file. × REW Long Automatically converts to the upper folder. Rewinds the current track. × Short Enters into in Mode menu. Starts navigation. × Menu Long Enters into in Main menu. × × Short Converts to the previous file. Increases the volume. Increases the volume. Volume + Long Automatically converts to the previous file. Automatically increases the volume. Automatically increases the volume. Short Converts to the next file. Reduces the volume. Reduces the volume. Volume - Long Automatically converts to the next file. Automatically reduces the volume. Automatically reduces the volume. Short × Activates/Deactivates Repeat function. × A↔B Long × Sets the playing speed. × SRS Short - Changes SRS. × Short - × REC Pause REC Long Starts recording. × × Short × Stops playing the current track. Stops recording. Stop Long Turns off the power. Stops and turns off the power. Saves and turns off the power.
17● Search Play Button Key Function Upon File Selection Play/Pause Short Starts to play the current track. FF Short Searches the next character string. REW Short Searches the previous character string. Short Enters into Mode menu. Menu Long - Volume + Short Goes to the previous track. Volume - Short Goes to the next track. REC Long - Stop Long Turns off the power.
18 ● Turn on the power, and select RM Radio from Mode menu. ● Auto Seek is a very useful function for listening to FM radio. Press FF/REW button for a few seconds. Then the channel will be automatically tuned in. The user can manually tune in the channel by shortly pressing FF/REW buttons. (When using Auto Seek function in an area with low signal reception, the user needs to manually tune in the channel by pressing FF/REW buttons. The user can set the environment to listen to the radio – Mute, Mono, or Stereo function.) ● Saving Channels Select the broadcasting channel to listen to by pressing FF/REW buttons, and shortly press SRS button. Then, the channel will be preset, and “Channel 01” message will be displayed. At this time, press FF/REW button and select the channel number (1 ~ 20). Then, press SRS button again to save the channel. (The user can check the channels by pressing SRS button for a few seconds in Frequency mode. Then, Frequency mode will be changed into Preset mode, and all channels and frequencies will be displayed. By pressing FF/REW buttons, the user can search all channels.) ● Recording The user can record radio by simply pressing REC button while listening to FM radio. The recorded file will be named ENC001 and saved under Encode folder in Record mode. According to the recording order, the index will be saved. * Notes Noise might be included in recording in a place with low reception or when recording is made indoors. When this happens, move to another place with better reception. The earphone line functions as an antenna. We recommend users to unfold the line as long as possible for best reception. FM Radio Reception
19 Press Menu button to enter into Mode menu. Mode menu is for replaying music and includes following sub menus. The user can select sub menus by pressing +, –, REW, and FF buttons. Mode Menu Play List Music Box Search Record User Folder User Data FM Text PLAY LIST The user can create his/her own play list with the bookmark and M3U files. The user can save maximum 100 songs in the bookmark. M3U files support maximum 100 songs with each M3U file saving 50 songs. Play List created by bookmark (* .BMK) Play list edited in WINAMP (* .M3U) The user can edit the bookmark file on the device and M3U files in WINAMP. * Creating M3U File 1. Run WINAMP program. 2. Open the music file. 3. Save the list. 4. Define the M3U file path. 5. Saving is completed. MUSIC BOX All MP3, WMA, OGG, and WAV files in the HDD will be played. The player can support maximum 1,000 folders and 5,000 titles. Mode Menu
20SEARCH The user can quickly and easily find the song that he/she wants using Search function. RECORD * Encode The user can replay files recorded by Line-in feature or during user’s listening to the FM radio. * Voice Record The user can replay files recorded with the microphone. USB FOLDER The user can open photos and pictures saved as image file format – JPG, JPEG, or BMP. USB DATA The user can replay files copied from external devices using Host function. FM Auto Seek function is very useful for listening to FM radio. When user presses FF/REW key for a second, the channel will be automatically tuned in. In an area with low signal reception, the user may be required to manually tune in the channel using FF/REW keys. * Saving Channels Select the frequency of the channel using FF/REW buttons and shortly press SRS button. Then, the selected frequency will be preset, and “Channel 01” message will be displayed. At this time, select the channel number (1 ~ 20) and press SRS button to save the selected frequency. (To check the channel numbers, press SRS button for a few seconds in Frequency mode. Then, the mode will be changed into Preset mode, and the saved channels and frequencies will be displayed. At this time, the user can search any channel by pressing FF/REW buttons.) * Recording The user can record the radio by pressing REC button while listening to FM radio. The recorded file will be named ENC001 and saved under Encode folder in Record mode. According to the recording order, the file index will be saved.
21Notes ( Noise might be included in recording a place with low reception or when recording is made indoors. When this happens, move to another place with better reception. ( The earphone line functions as an antenna. We recommend users to unfold the line as long as possible for best reception. TEXT The user can open text data saved under Text folder.
22 MAIN MENU SYSTEM DISPLAY REPEAT SOUND SRS AUTO PLAY POWER OFF TIME FAST Charge AUTO SCAN LEVEL FM BAND MODE SYNCHRONOUS VOICE ENCODE SLEEP TIME INTRO TIME LANGUAGE BACKLIGHT TIME LCD CONTRAST ID3 TAG PLAY TIME SYSTEM LYRICS JPEG PLAY MODE EQUALIZER USER EQ NORMAL WOW EFFECT SRS EFFECT TRUBASS EFFECT RESUME DEFAULT SRS LEVEL TRUBASS LEVEL PLAY DATA MODE SCROLL SPEED FOCUS LEVEL DEFAULT VOLUME Main Mode DELETE DELETE ON DELETE FOLDER
231. AUTO PLAY ON, OFF The user can set automatic playing of the selected file. POWER OFF TIME 1 MINUTE, 3 MINUTES, 5 MINUTES, ALWAYS ON The user can set the player to be automatically turned after a certain time of player’s not functioning. FAST CHARGE ON, OFF The user can set to rapidly charge the battery using the adapter. ON: Three hours of rapid charging using the adapter OFF: Four hours of normal charging using the adapter AUTO SCAN LEVEL LOW, MID, HIGH The user can set the FM sensitivity level. FM BAND MODE WORLD, JAPAN, EUROPE World: 87.5 ~ 108MHz, 100KHz Step Japan: 76.0 ~ 108MHz, 100KHz Step Europe: 87.5 ~ 108MHz, 50KHz Step SYSTEM - When the Ac adapter and the USB are connected to the player, the player will be automatically charged. - While the battery is being charged by the AC adapter, the green LED is on, and after charging is completed, the green LED will be turned off. - If the user turns off the player while the AC adopter is connected to the player, the player will enter into Charging mode (with the corresponding LED turned on.) Normal Charging Rapid Charging USB Charging 4 hours 3 hours 4 hours ※ When the player is set to be charged through the USB in Main menu, the player will not be connected to the PC but will be only charged.
24 SYNCHRONOUS ON, OFF On: The start and the end of the song are automatically detected, and separate files are created for each track. Off: The user can define the start and the end of the track. VOICE 32 Kbps, 48 Kbps, 64 Kbps, 96 Kbps, 128 Kbps The user can set the sound quality for voice recording: 32Kbps, 48Kbps, 64Kbps, 96Kbps, or 128Kbps ENCODE 32 Kbps, 48 Kbps, 64 Kbps, 96, Kbps 128 Kbps The user can set the sound quality for line-in recording and FM recording: 64Kbps, 96Kbps, 128Kbps, 256Kbps, or 320Kbps SLEEP TIME OFF, 15 ~ 120 The player will be turned off after a certain time preset by the user: Off and nine steps every 15 minutes from 15 minutes to 120 minutes INTRO TIME 5, 10, 15 The user can decide to play only the beginning part of the track: 5, 10, or 15 seconds. The track will be played only for the time preset by the user. RESUME ON, OFF On: Playing of the track will be resumed from the point where playing stopped previously. Off: The track will be played from the beginning. DEFAULT NO, YES If the user activates Default (by selecting Yes), the setting of the player will be reset into default setting made in the factory.
252. LANGUAGE KOREAN, ENGLISH, JAPANESE, CHINESE The player supports Korean, Japanese, (traditional) Chinese, and (simplified) Chinese. * Notes - ID3 Tag, file names, folder names, and text are decided by the OS in which they are created. - For example, files created in a Korean-version OS, the file names will be properly displayed in proper Korean setting only. BACK LIGHT TIME 0 ~ 10 The user can set the backlight time from 0 to 10 seconds. SCROLL SPEED X1, X2, X4, X 8, X16 The user can set the scroll speed on the LCD - X1, X2, X4, X8, or X16. LCD CONTRAST 0 ~ 10 The user can adjust the LCD contrast from 0 to 10. ID3 TAG ON, OFF On: The singer, the title, and the album title of the MP3 file will be displayed. If there is no ID3 tag information, only the file name will be displayed. Off: Only the file name will be displayed. PLAY TIME NORMAL, REVERSE Normal: The played time of the track will be displayed. Reverse: The remaining time of the track will be displayed. SYSTEM The user can set to display system information: Firmware version, HDD space, used space, and number of saved files. DISPLAY
26 LYRICS ON, OFF When there is an LCR file names same as the title of the song currently played, the lyrics will be displayed on the LCD. On: To displays lyrics Off: Not to display lyrics ※ If there is no LCR file, lyrics will not be displayed although Lyrics function is on. For more information about creating an LRC file, see the corresponding part in the manual. JPEG ON, OFF On: To display JPG and JPEG files under User folder on the initial screen Off: To use the default initial screen design TEXT NORMAL, REVERSE Normal: To display dark characters on the bright background Reverse: To display bright characters on the dark background 3. PLAY MODE NORMAL, REPEAT, SHUFFLE NORMAL: To play all tracks in order once REPEAT: To repeat the current track SHUFFLE: To continuously play all tracks in a random order PLAY DATA MODE ALL FILE, ONE FILE, ALL FOLDER, ONE FOLDER ALL FILE: To set all files ONE FILE: To set on file ALL FOLDER: To set all folders ONE FOLDER: To set one folder REPEAT
274. EQUALIZER NORMAL, CLASSIC, ROCK, JAZZ, U-BASS, USER EQ The user can select a suitable equalizer for the current track. USER EQ The user can set the equalizer by himself/herself. SRS LEVEL 1 ~ 10 LEVEL The user can set SRS effect from 1 to 10. TRUBASS LEVEL 1 ~ 10 LEVEL To user can set TruBass effect from 1 to 10. FOCAS LEVEL LOW, HIGH Te user can select the FOCAS effect – Low or High. DEFAULT VOLUME 20 ~ 30 LEVEL When the user turns on the player, the user can set the volume level. When the user sets high volume, loud sound may do harm to user’s hearing ability. We recommend the user to set a proper level of volume sound. SOUND
285. SRS Normal, WOW, SRS, TruBass With the SRW Wow function, the user can enjoy music to the maximum. . SRS WOW ※Effects SRS WOW is the most widely used 3D sound technology developed by SRS Institute in the USA. SRS WOW technology realizes 3D sound effect only with two speakers as if using multi-channel speakers. This technology consists of SRS for surround effect, TruBass to complement low-tone sound, and Focus to increase the clarity of sound. The user can select the sub features to get the best sound effect. 6. DELETE ON The user can delete voice, line-in, and FM radio recording files and related folders. SRS DELETE
29 This player supports three kinds of recording – recording with the built-in microphone, recording from an external device through Line-in port, and FM radio recording. ①Recording with the built-in microphone: Press REC button shortly in any mode except FM, Text, or Search mode. Then, the player will automatically enter into Voice mode and start to record voice next to the final recording file. ②Recording from an external device through Line-in port: Connect the line-in cable to the output port of an external device and the line-in input port of the player. Then, press REC button for a while in any mode except FM, Text, or Search mode. Then, the player will automatically enter into Line In Record mode and start recording next to the final recording file. ③ FM radio recording: The user can record FM radio broadcasting by pressing Recording button while listening to FM radio. ● Recording Monitoring The user can listen to the recorded contents by connecting the earphones while recording. ● Checking Remaining Recording Time The remaining memory space is displayed during recording for the user’s reference.. <Caution> - Recording is made only there is available space for recording (32KB). After the available space is used up, “Memory Full” message will be displayed. - The user can record maximum 2, 000 files. Notes※ - About Memory Full “Total” displayed on the LCD of the player while the player is on shows the capacity of the memory, and “Used” shows the used space in the memory. Recording
30 ● Connecting External Devices When the line-in cable is connected, the player will automatically enter into Record mode and opens Encode folder. The user can copy the voice files recorded with the audio cable to external devices such as cassette tapes and MDs. ● Connecting to an audio device ① When recording to the player from an external source Connect the audio cable to Line In Input port of the player. ② When recording to an external source from the player Connect the audio cable to the earphone port of the player and the microphone port or an input port the external device. Connecting to an audio device Notes※ - When connecting the player to an external device, turn off the device first. - Please read the manual of the external device before connecting the player to an external device. - The player does not internally provide power for the external microphone. Therefore, the user cannot record voice by connecting an external microphone to Line-in port. ● When recording to the player from an external device When recording from an external device, lower the volume of the source device and connect the cable to the player before starting recording. ● When recording to an external device from the player Start recording as soon as turning on the player. (However, this timing may differ depending on each device. Therefore, we recommend users to make tests before starting recording.) When recording, set the volume the player at the mid level and do not change the volume level during recording. Connecting External Devices
31 The player provides USB mass storage function so that the player itself can function as a single hard drive. The user can connect the player to the PC in which Windows ME, 2000, or XP, not Windows 98, is installed by plug-and-play method without installing special software. Installing Driver ⑴For Windows ME, 2000, or XP When connecting the player to the PC through the USB cable, “Detect New Hardware” message will be displayed and the driver will be automatically connected. * Click on [My PC], and check if the player is detected as a portable disk. * After the USB driver is normally installed, click on Manager and Device Manager tab. Then, check if the player is displayed as a large-capacity USB storage. (In Windows ME, “?” may be displayed, which is not an error.) Installing Drivers and Uninstalling Di
32 ⑵Disconnecting the Cable from the USB Port Before removing the player, disconnect the cable first. Otherwise, the data may be lost or broken. ① Close all files. When a file or folder is open, the device will not be properly removed from the PC. ② Click on the icon displayed on the lower-right part of the screen. Then, the toolbar shown below will appear. Delete the device. ③ Click on the toolbar. Then, the following window will appear. ④ When a toolbar shown below appears, physically disconnect the player from the PC.
33 The player provides USB mass storage function so that the player itself can function as a single hard drive. The user can connect the player to the PC in which Windows ME, 2000, or XP, not Windows 98, is installed by plug-and-play method without installing special software. Connecting to the PC If the user connects the USB cable while the device is off or being charged, the device will function by USB power and software connection will be automatically made. (While recording with the device, the user cannot connect the device to the PC.) If the user’s PC uses Windows 98, the user will need to install a separate driver. Disconnecting from the PC Before removing the player, disconnect the cable first. Otherwise, the data may be lost or broken. ①Close all files and click on icon( ) at the lower-right part of the screen. (If there is a file or folder open, the device will not be properly removed from the PC.) Then, the following toolbar will be created: ②Click on the tool bar. Then, the following window will appear. Delete the device. ③When the following toolbar is displayed, physically disconnect the player from the PC. ※If the PC supports only USB 1.1, a message that says that the device cannot be removed may be displayed. When this happens, check the HDD is not operating and disconnect the USB cable. Supporting FAT32 File System Connecting to the PC
34 ⑴When the user connects the player to the PC for the first time, the following window will appear in which Encode, Voice Record, Play List, Firmware, Text File, USB Data, and JPG Data folders are included. ⑵The user can save not only MP3 music files but other data files, and read, write, and delete them on the player just as in the hard disk of the computer. Management of Folders and Files
35 ⑶No separate folder will be created when the player is connected to the PC in Music Box mode. The user can create folders on the PC as shown below and check them on the player in Music mode. * The user can check music folders and files in the folder in Music Box mode.
36 Receiving Firmware File Connecting to the PC Firmware File Set Drive Copying Firmware Folder Remove from PC Set On Upgrading Rebooting Upgrading Completed Firmware Upgrade
37Troubleshooting When a breakdown is suspected, please check the following: Trouble Things to Check Measures Check if the hold switch is in On position. Move the hold switch to Off position. The power is off. Connect the adapter and check if the Player functions. Check if the battery is charged. Charge the battery, if necessary. Check if the volume level is 0. Increase the volume. (VOL 20 is recommended.) Check if there is a playable file saved in the player. Copy a playable file from the PC. Check if the file as been damaged. Copy the file again from the PC. The sound is off or noise is generated. Copy the corresponding file to the PC, and check if the file is normally played in the PC. This problem might occur when the bitrate is too low. Check if the adapter is correctly connected to the outlet. Correctly connect the adapter to the outlet. Check if the suitable input power is supplied. Connect the adapter to an outlet with designated voltage. The AC adapter does not function. Check if DC port is correctly connected. Correctly connect the DC port to the outlet. Check the file to be played and O/S where ID3 Tag data was created. Set Multi-language submenu in Main menu. Check if Lyrics menu is on in Main menu. Set Lyrics menu on in Main menu. Characters are not normally displayed on the LCD. The lyrics are not displayed. Check if there is an LCR file with same name as the file to be played under the same folder. Copy the same-named LCR file to the same folder. The noise is detected when the user listens to the radio, and it is difficult to tune in the channel. FM radio reception is difficult in frequency-shadow areas such as buildings, subways, moving vehicles. The player and the earphones function as an antenna. Adjust directions of the player and the earphones to better receive signals. Automatic connection is not made in Windows 98 OS. Check the OS. If the OS is Windows 98, install Windows 98 driver. Automatic connection is not made to the PC. Check if the USB cable is correctly connected to the player. Correctly connect the USB cable to the player. Check if the cable is correctly connected to the USB 1.1 host port. Correctly connect the cable to the USB 1.1 host port. Connection is not established with an external USB device. Check if the external USB device is a UMS type. If the connection is not automatically established when the device is physically connected to the PC, the host function cannot be used for the device. The shorter the track time, the shorter the playing time. The higher the sampling frequency and the bitrate of the track, the shorter the playing time. The playing time is different from described from the manual. The more key manipulations and the shorter the LCD backlight time, the shorter the playing time.
38Specifications Part Item Specification Capacity 2GB Size 1 inch HDD Disk File System FAT32 Frequency Range 20Hz ~ 20KHz Earphone Output 10mW(L) + 10mW(R): 16Ω, Maximum volume Signal to Noise Raito 90db (1KHz input 0db at USE LPF 30KHz) Frequency Respond ±2dB Distortion 0.1%±0.05 (1KHz input 0db) Number of Files Maximum 5000EA (MP3 + WMA) Audio Channel Stereo MP3 Bitrate 64 Kbps, 96 Kbps, 128 Kbps, 256Kbps, 320 Kbps Recording Voice Bitrate 32 Kbps, 48 Kbps, 64 Kbps, 96 Kbps, 128Kbps World 87.5 ~ 108.0MHz Step 100KHz Japan 76.0 ~ 108.0MHz Step 100KHz Europe 87.5 ~ 108.0MHz Step 50KHz Earphone Output 10mW(L) + 10mW(R): 16Ω, Maximum volume Signal to Noise Raito 55dB at 1mV FM Radio Reception Type Earphone Code Antenna Communication Built-in USB 2.0, USB 1.1(USB Mass Storage) System Specification CPU 200MHz, RAM 64MB, 20MB or Higher Capacity of Hard Disk O/S Windows98SE, Windows2000, Windows ME, Windows XP Sound Card Compatible with Sound Blaster 16 Display 640X480 or higher resolution PC Interface USB Jack USB 'B' Type Plug File Format MPEG 1/2 LAYER 3, WMA, OGG, WAV MP3 Bitrate 8Kbps ~ 320Kbps WMA Bitrate 5Kbps ~ 192Kbps OGG Bitrate 32Kbps ~ 500Kbps File Support Tag ID3 Tag V1, ID3 Tag V2 2.0, ID3 Tag V2 3.0 LCD Resolution 1.8 inch Color LCD Playing Time MP3 Playing Approximately 12 hours AC Adapter DC 5V 1.5A Power Battery 3.7V LI-Polymer AC Adapter Approximately 180 minutes for rapid charging or 240 minutes for normal charging Charging Time USB Approximately 240 minutes Dimensions Weight LCD 1.8 inch CSTN LCD Operating Temperature 5°C ~ 35°C General Supported Languages Korean, English, Japanese, Chinese (Traditional/Simplified)
39Repair Service ● When a breakdown occurs, stop using the product and contact the sales agency or the service center of DIASONIC Technology at 82-031-474-0852 for repair services. Warranty (Service Policy) ● Free repair services will be provided in compliance with the free repair policy of DIASONIC Technology. If a breakdown occurs during the warranty period, bring the product with the warranty card to the sales agency or the service center of DIASONIC Technology. Free repair service will be provided only when the purchase date and the name of the sales agency appear on the warranty card. Please check all information is written when purchasing the product from the sale agency. The warranty card is not reissuable so we recommend you keep it safely. <Free Repair Policy> 1. This product has passed strict quality control and inspection. 2. Breakdowns occurring under normal operating conditions described in the user manual within the warranty period will be subject to free repair services: 3. For the following cases, some service fees will be charged: 1) When the customer fails to submit the warranty card 2) When information is missing in the warranty card – purchase date or the name of the sales agency 3) When the product is damaged or broken down due to user’s mishandling 4) When the product is damaged or broken down due to user’s repair or remodeling 5) When the product is damaged or broken down due to fires, pollution, earthquakes, and other natural disasters 6) When the product is damaged or broken down due to leakage of the battery 7) When the consumable parts such as a battery need to be replaced 4. This warranty card is only valid for service in Korea. (This warranty card is only valid for service in Korea.) (Request When Mailing) Please beware of the following when sending a mail: 1. Please enclose the warranty card with the product when mailing during the warranty period. 2. Please wrap in shock-absorbing materials and put the product in a box to prevent damage during transportation. Mailing fees and wrapping fees should be born by customers. 3. To prevent loss, please send the product for repair services by registered mail.
40Product Warranty Warranty Card Product: HDD MP3 Player Model: DHD-1000 Warranty Period: One Year Purchase Date: ______ ________, _________ Name Address Purchaser Telephone Name Address Seller Telephone ● Please contact the sales agency of DIASONIC Technology Co., Ltd. for breakdown of the product. ● Exchange, (charged or free) repair services, refund, and part-keeping periods comply with regulations of customer protection. ● For questions or more information about the product, contact DIASONIC Technology Co., Ltd. DIASONIC Technology Co., Ltd. ● Address: 321-43, Seoksu-dong, Manan-gu, Anyang-si, Gyeonggi-do (430-806), South Korea ● Telephone Number - Representative Number: 82-31-474-0852 Website: http: //www.diasonic.com The warranty card is only valid in Korea. Please keep this card for free repair services. &TTS, Media SYNC

Navigation menu