Diasonic Technology Co PDVR1000 POCKET VIDEO RECORDER User Manual PDVR 1000 Manual
Diasonic Technology Co Ltd POCKET VIDEO RECORDER PDVR 1000 Manual
User Manual
User Manual Model: PDVR-1000 1. Name of each part ① Neck Strap Holder ② Built-in Microphone ③ Hold Key ④ Stop/ESC ⑤ Rec./Pause ⑥ Menu in the recording modes ⑦ Volume down ⑧ Volume up ⑨ RW ⑩ FF ⑪ Play/Stop ⑫ A/V Out ⑬ A/V In ⑭ Remote Controller ⑮ DC Jack 16 micro SD card slot/USB jack 17 Reset 2. LCD ① Date ② Time ③ Current Memory Storage ④ Speaker On/Off ⑤ Volume Level ⑥ Battery Status ⑦ Current selected menu 3. Quick operation of each button Long Key Power On/Off Short Key Play/Pause in Playing a file. Enter/Select in Menu & file list LCD Off Stop playing or recording. Escape out of a current menu. Preview in connecting camera Start/Pause recording video or audio in connecting camera Enter into submenu list Move to upper or lower menu or file. Volume Up or Down in playing a file. Move to upper or lower directory. FF or RW in playing Change a setting value. ☞ Long key: Hold a key for 2-3 seconds / Short Key: Hold a key for 1 second 4. Structure of Main Menu RECORD VIDEO AUDIO IMAGE SETTING 1) RECORD Record an input signal (Video & Audio) from the connected camera. The file recorded in this mode is stored at the Video Folder. 2) VIDEO A recorded video file(s) is stored in the Video folder and the file(s) is played back in this menu. 3) AUDIO A recorded audio only file(s) is stored in the Audio folder and the file(s) is played back in this mode. 4) IMAGE An image file(s) taken by Snap Shot function is stored in the Image folder and the file(s) is checked in this mode. 5) SETTING Use can set up most of a setting value related to the system menu here. 5. Quick Operation of main functions 1) Video Recording(Video or Video + Voice) Turn it on by pressing Preview Press Preview to start recording. If so, Live image from Press to start recording. Live image from a a camera is shown on the LCD with "Preview" in red camera is shown on the LCD with "Preview" in red on the right of the LCD before recording. on the right of the LCD before recording. ☞If a camera is not connected or connected in loose, "No Signal" will be displayed in blinking several times instead of a image and then goes back to main menu display. Recording Recording starts when is pressed once again with "Rec" in red on the right of the LCD. Stop Recording Pause If is pressed once again, recording is in pause with Pause in red on the LCD. If is pressed the recording is in stop and then turn it to the preview display. Re-start recording Stop Recording If If again. is pressed once again, recording is started is pressed the recording is in stop and then turn it to the preview display. ☞ Making a new file while recoding If pressing or while recording, the recording file is separated with a new file name. The recording file is stored in “Video Folder” ☞ Changing a setup value While recording, Recording time & Microphone sensitivity are changeable by pressing without stopping the recording. 2) Audio Recording(Voice) Turn it on by pressing Move to “Setting” Menu by pressing Press or to enter into a recording mode setting for Voice only. Go to “Record mode” by pressing Press or to enter into submenu list(Video+Audio/Video/Audio). Change the list of mode to “Audio” by pressing or Select “Audio” by pressing , if so, “Audio” is disappeared. Get out of the setting list by pressing Recording 1. In the main menu display, - “RECORD” - Press - Press ->monitoring. to start recording and press it again for pause. - Re-start recording by pressing - Press to stop recording. Recording 2. By Rec. Button - Press to enter into the monitoring. - Press once again to start recording and press it again for pause. - Re-start recording by pressing - Press to stop recording. ☞ Making a new file while recoding If pressing or while recording, the recording file is separated with a new file name. The recording file is stored in “AUDIO” ☞ Changing a setup value While recording, Recording time & Microphone sensitivity are changeable by pressing stopping the recording. 3) Recording Time: No(Default)/5/10/20/30/50mins. Microphone Sensitivity: High/Middle(default)/Low Snap Photo Shot Turn it on by pressing Preview Preview without Press to preview before taking a photo. Press to preview at the RECORD Mode. If so, Live image from a camera is shown on the LCD Live image from a camera is shown on the LCD with "Preview" in red on the right of the LCD. with "Preview" in red on the right of the LCD. ☞If a camera is not connected or connected in loose, "No Signal" will be displayed in blinking several times instead of a image and then goes back to main menu display. Taking a photo shot Press to take a shot. The photo is stored to “IMAGE Mode” 4) VIDEO The file(s) recorded in Video+Audio or Video is stored and play back at this mode. Move to “VIDEO” by Press or to enter into file list. Move up or down on the file list to select a file. Play a selected file back or Pause. Stop and then go to the main menu. ☞ On the file list, if pressing with short key, submenu(Playback/File Delete/File Protect/File Information) is appeared. Playback: Play a selected file back. File Delete: Delete a selected file.(No, One, All) File Protect: The file with File Protect won’t be deleted.(Off, On) File Information: File name, size, Time, Protect status are displayed. With or , user can move up and down on the menu list and then select a menu by ☞ While playing a file back, user can set up the volume, Repeat, Play speed and TV Out. Volume: 1-30 Repeat: No/One/All/Radom Play Speed: X1, 2, 4, 8, 1/2, 1/4, 1/8 TV Out: LCD, TV 5) AUDIO A recorded audio only file(s) is stored in the Audio folder and the file(s) is played back in this mode. Move to “AUDIO” by Press or to enter into file list. Move up or down on the file list to select a file. Play a selected file back or Pause. Stop and then go to the main menu. Model: PDVR-1000 ANSI C63.4: 2003 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS. 1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 9 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:15f85cc7-9767-4eed-bde5-e5e782361e6c Producer : Acrobat Distiller 6.0 (Windows) Modify Date : 2009:04:09 11:00:03+09:00 Create Date : 2009:04:09 11:00:03+09:00 Creator Tool : PScript5.dll Version 5.2 Document ID : uuid:5f28689f-42ff-48ca-b990-7f3d996df5f7 Format : application/pdf Title : Microsoft Word - PDVR-1000_Manual_수정 Creator : user Author : userEXIF Metadata provided by EXIF.tools