Diasonic Technology Co RVM-704M TOUCH SCREEN MONITOR User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1826136
Application ID	DnJGOj3iGz0tkVz5btrCVQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	118.77kB (1484563 bits)
Date Submitted	2012-10-30 00:00:00
Date Available	2012-10-30 00:00:00
Creation Date	2012-09-27 21:30:24
Producing Software	Microsoft® Word 2010
Document Lastmod	2012-09-28 11:30:37
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	maverick

FCC TEST REPORT
Report No.: EMC-FCC-R0079
http://www.emc2000.co.kr
Appendix 6.
User manual
EMC compliance Ltd.
Page: 1 of 1
480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea
82 31 336 9919 (Main) 82 31 336 4767 (Fax)
This test report shall not be reproduced except in full, Without the written approval.
2-DIN, 7”Touchscreen Monitor
Model: RVM-704M
Instruction Manual (Ver 1.0)
Index
1.
2.
3.
4.
5.
Caution
Components of the product
How to use the product
How to install the product
Specification
• Thank you for purchasing our touchscreen vehicle monitor.
• Please read this manual before you use the product.
• The product may be different than described in the manual;
depending
g on renewal and/or upgrade
pg
of S/W version and p
performance it
can be altered without notice.
1. Caution
● For your safe operation, please read this manual before you
start to use the product. We inform you that our company shall not be
responsible for failures and troubles that are occurred due to misuse or
neglection of the cautions written on this manual.
● Operating this equipment when driving a vehicle might cause an
accident. Use the equipment after parking or stopping the vehicle in a safe
area.
● When wiping off the dust, use a soft fabric instead of liquid solvents
(thinner ,benzene etc.) solution or a wet rag.
● Do not press the liquid crystal screen hard. It might be damaged by hard
pressure.
● Do not drop or give shock
shock. It might cause breakdown or damage
damage.
● Do not dismantle the product arbitrarily. We do not supply free after
service for an arbitrarily dismantled product.
● Touching the power with a wet hand causes electric shock. Caution
required.
● For accessories or cables to connect with the product, it is
recommended to use proper goods from our company. We are not
responsible for any problems caused by wrong articles.
● Do not disconnect the power cable during using the product. It might
cause damage to the product.
# Amplified explanation is as follows.
● Caution: This part informs what to keep in mind or understand and what
caution
ti iis required
i d tto use th
the product.
d t
● Ref (reference): Reference is about functional explanation.
2. Components of the product
①
②
③
①Touch Screen
● By touching one of the small pictures during multi screen mode, the
concerning small picture will be enlarged into Full Screen mode.
● By touching the screen it is possible to control the equipment or to
change the settings.
② Power On/Off
● Press the Power button for 0.5 seconds to turn on the screen.
● Press the Power button for 0
0.5
5 seconds to turn off the screen
when it is tuned on.
③illuminance Sensor
● Behind this window a sensor detects the actual light conditions in the
area around the screen. When activated via the menu settings, this sensor
automatically controls the brightness of the screen. (Day/Night control)
Back side
③
②
①
①Power Cable
● Connect the Power Cable
( VCC/GND/TRIGGER1~
TRIGGER5/Speed Switch )
②Camera Cable
● Connect the Camera Cable
( Camera cable2 )
③ Internal SPK
PACKAGE CONTENTS
● Please check that you have the correct contents before using this product.
● If any items are missing, please contact your dealer.
Monitor
Camera Cable
Sunvisor
Power Cable
OPTION
EXT.SPK
EXT.MIC
BRKT
Manual
3. How to use the product
Start Screen
● When the booting is ready, the multi screen as below will be displayed.
When the small window is
Touched, it is enlarged.
● When the small windows on the multi screen are touched, the channel
is enlarged into full screen mode. One more touch returns it back to the
multi screen mode.
●
: Controls volume of the speaker
●
: Settings
S tti
menu
●
: Run the Bluetooth Phone (Optional function)
●
: Change Input signal
●
: Multi screen mode
Volume Control
●
Press the button to display Volume Pop-up.
②
①
① Press the button to mute
② Press the button to increase the volume
③ Press the button to decrease the volume
③
Input selection
●
Press
th
the IInputt b
button
tt
tto change
IInputt
Press input button
once: AUX1
Press input
button 3 times:
Cam
Press input button
twice: AUX2
Multi screen
●
Press
th
the multi
lti screen b
button
tt
tto di
divide
id th
the screen.
①
③
②
④
Press multi
screen button 3
times:
Cam1,2,3,4
Press multi screen
button once:
Cam1,Cam2
①
②
③
Press multi screen button
twice: Cam3,Cam4
④
Setting Mode
●
Press
th
the setting
tti
menu b
button
tt
tto open th
the S
Setting
tti
screen.
● CAM : Adjust brightness of Camera input screen
● AUX : Adjust brightness of AUX screen
Display
Input the name into each channel.
● Mirror : Mirror image or normal image
● Up : Change up and down of the screen
● Shutter : Enable to operate Shutter/Heater Camera
Display
Setup screen position of each channel
※ Caution: Cam1and AUX1 cannot be setup at the same time
Cam2 and AUX2 cannot be setup at the same time.
Setup the screen on each Trigger
The screen will be showed screen by each Trigger set if input
Trigger.
Display
Display
Di
l th
the ffullll screen according
di tto each
channel setup when setting up On
Display the dividing lines of the screen
Display
Adjust Parking line of each Trigger
Calibration
Trig 1
Trig.1
Front & Rear
Function
The screen is turned ON automatically
when starting the vehicle
Automatic brightness adjustment by sensor in the
front housing
Sensitivity of automatic brightness adjustment, level 0 to 10
controlled by actual light conditions (Day/Night)
Function
Keep Trigger activated during setup time after
Trigger off in order to bridge temporary
powerloss, e.g. from vehicle’s turnlight signal
Re-adjust center Point of Touch panel
STEP 1 of 3
Click on center of '+'
+ icon
for Touch screen calibration.
Function
Detect speed of a vehicle from 10 to 200 Hz
To switch automatically into the screen ON mode,
by detecting a speed signal (tacho signal)
System
Set time displaying the Menu screen
Set time displayed on the screen
The screen is turned off when there is no input like touching it
or so during
d i
setting
tti up ti
time
System
Set a password to lock the Menu button
Support languages for each country ( Option )
System
Initializing set points of Menu
Display Firmware Version and Model name
Bluetooth Phone (Optional)
●
Press the button to start Bluetooth
Screen of Bluetooth start
Start-up screen displays the Phone Book list of the phone paired
: Displays call lists during absence
: Di
Displays
phone
callll lilists
t received
i d
: Displays phone call lists sent
: Use for making a call dialing numbers
: Displays a Phonebook list
: Setup of Bluetooth
: Finishes Bluetooth
Bluetooth Phone
● Enter the Paring Mode for Paring with Bluetooth
by pressing the
button
1. Pairing mode is set by pressing the
button
2. Connect Bluetooth to a cell phone you want searching Bluetooth
device. (Enter the Pin code depending on type of cell phones)
3. Message is displayed when it is connected as below
4. Return to the start-up screen of Bluetooth
by pressing the
button
button.
Bluetooth Phone
●
: Displays devices Paired
* Displays devices paired up to 8 devices
• Displays
p y devices p
paired
• Deletes devices connected by the
button
• Connects devices by pressing the
button
• Deletes all devices by pressing the
button
< Devices paired are connected automatically in order >
Bluetooth Phone
● Down load phonebook list after pairing succeed.
•Call after press the number in the list.
4. Installation
Pre-Installation
5. Specification
LCD : Built in 7“ TFT LCD (WVGA 800x480, with Touch Panel)
Camera : 4Ch input (1 Vp-p, 75Ω) /NTSC, PAL ( Video & Audio )
External speaker
Output
p (( +,- 2pin
p ) Max 3.1V @ 8 Ohm Speaker
AUX1( RCA )
5 Trigger inputs (Cable Input : 12 ~ 24V)
ALS Sensor (Night & Daytime Brightness detection)
Power : 12~30Vdc (12Vdc 1.3A)
Operating Temp. : -20’C ~ 55’C
Storage Temp. : -30’C ~ 85’C
Dimensions (W x H x D) : 178mm x 110mm x 44.6mm
Weight : appx. 640g

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Tagged PDF                      : No
XMP Toolkit                     : 3.1-702
Create Date                     : 2012:09:27 21:30:24+09:00
Creator Tool                    : Microsoft® Word 2010
Modify Date                     : 2012:09:28 11:30:37+09:00
Metadata Date                   : 2012:09:28 11:30:37+09:00
Format                          : application/pdf
Creator                         : maverick
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:ca3e538c-d747-45d9-8f3a-1fe6eb69708a
Instance ID                     : uuid:dcf641e8-63d6-4d48-8e7e-07e398952d2c
Page Count                      : 27
Language                        : ko-KR
Author                          : maverick

EXIF Metadata provided by EXIF.tools