Digi 50M1312 802.11b transceiver to serial converter User Manual Digi Connect SP and Wi SP Hardware Reference
Digi International Inc 802.11b transceiver to serial converter Digi Connect SP and Wi SP Hardware Reference
Digi >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 536334 |
| Application ID | eDYjrw43uofcOvp5pQ5L8w== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 198.75kB (2484369 bits) |
| Date Submitted | 2005-04-27 00:00:00 |
| Date Available | 2005-04-27 00:00:00 |
| Creation Date | 2005-03-16 15:56:45 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2005-04-26 14:38:52 |
| Document Title | Digi Connect SP and Wi-SP Hardware Reference |
| Document Creator | FrameMaker 7.0 |
| Document Author: | Digi International |
Digi Connect SP & Digi Connect Wi-SP Hardware Reference TM 90000540_C TM Digi International Inc. 2003, 2004, 2005. All Rights Reserved. The Digi logo is a registered trademark of Digi International, Inc. Digi Connect SP and Digi Connect Wi-SP are trademarks of Digi International, Inc. NetSilicon, NET+Works, NET+OS, and NET+ are trademarks of NetSilicon, Inc. All other trademarks mentioned in this document are the property of their respective owners. Information in this document is subject to change without notice and does not represent a commitment on the part of Digi International. Digi provides this document “as is,” without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of fitness or merchantability for a particular purpose. Digi may make improvements and/or changes in this manual or in the product(s) and/or the program(s) described in this manual at any time. This product could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes may be incorporated in new editions of the publication. Contents About This Guide ..................................................................................................................... 7 Purpose ............................................................................................................................. 7 Related Documentation .................................................................................................... 7 Chapter 1: Introducing the Digi Connect SP & Digi Connect Wi-SP Hardware ............ 9 Hardware Overview ......................................................................................................... 9 LEDs............................................................................................................................... 11 Reset Button ................................................................................................................... 12 Antenna .......................................................................................................................... 13 MEI 232/422/485 Switch Settings ................................................................................. 13 DB-9 Connector ............................................................................................................. 14 JTAG Interface ............................................................................................................... 15 Power Jack...................................................................................................................... 16 Chapter 2: Programming Considerations.......................................................................... 19 GPIO............................................................................................................................... 19 GPIO Pin Use ................................................................................................................. 21 LEDs............................................................................................................................... 21 Flash ............................................................................................................................... 22 Memory .......................................................................................................................... 22 Reset Button ................................................................................................................... 23 Appendix A: Specifications.................................................................................................. 25 Network Interfaces ......................................................................................................... 25 Serial Interface ............................................................................................................... 26 Data Rates (bps) ............................................................................................................. 26 Flow Control Options..................................................................................................... 26 Contents Environmental................................................................................................................ 26 Power Requirements ...................................................................................................... 27 Mechanical ..................................................................................................................... 27 Antenna Information ...................................................................................................... 28 RF Exposure Statement.................................................................................................. 32 Overlay Specifications ................................................................................................... 33 Appendix B: Certifications ................................................................................................. 35 FCC Part 15 Class A ...................................................................................................... 35 Industry Canada ............................................................................................................. 36 International EMC Standards......................................................................................... 37 Appendix C: Change Log .................................................................................................... 39 Revision C...................................................................................................................... 39 About This Guide Purpose The purpose of this guide is to assist developers creating custom embedded software for the Digi Connect SP and Digi Connect Wi-SP platform using the NET+OS operating system and tools. Related Documentation See the NS7520 Hardware Reference for information on the NS7520 chip. See the NET+Works BSP Porting Guide for additional programming information. Related Documentation Introducing the Digi Connect SP & Digi Connect Wi-SP Hardware Hardware Overview The following figure identifies various Digi Connect SP and Digi Connect Wi-SP connectors, LEDs and switches. Hardware Overview Digi Connect SP Hardware Overview DB-9 Ethernet connector Power LEDs MEI switch Reset button Note MEI switches and the Reset button are in the same location for both the Digi Connect SP and Digi Connect Wi-SP. 10 Digi Connect SP Hardware Reference Digi Connect Wi-SP Overview LEDs The Digi Connect SP and Digi Connect Wi-SP provide three LEDs. Two of the LEDs are connected directly to the hardware; the other is software programmable. See the following table for more information. LED Descriptions LED Power Color Red (labeled PWR) Purpose This LED is software programmable. The default is that this LED indicates power (and is therefore always on). See “LEDs” on page 21 for more information 11 Reset Button LED Descriptions LED Color Purpose Network link status: – On - unit is associated with an access point Link ACT Green Yellow – Blinking slowly - unit is in ad hoc mode – Blinking quickly - unit is scanning for a network This LED is wired to the Ethernet hardware. – On indicates bad initialization – Off indicates ready – Blinking indicates network activity Reset Button The behavior of the reset button is user-defined. See “Reset Button” on page 23 and the NS520 BSP Porting Guide for LED programming information. 12 Digi Connect SP Hardware Reference Antenna The Digi Connect Wi-SP is available with 1 RP-SMA connector. The antenna is connected to the product with a reverse polarity SMA connector (sub-miniature size A). The antenna only fits on the product one way to ensure a proper connection. Another option for both signal reception and design flexibility is to use a 30cm antenna extension cord (Digi part number DC-ANT-E-24DP) with .5dB loss to separate the antenna from the product.. Caution: This Part 15 radio device operates on a non-interference basis with other devices operating at this frequency when using the antennae listed in the Antenna Specification table. Any changes or modification to the product not expressly approved by Digi International could void the user’s authority to operate the device. Antenna Description Desktop Dipole 30 cm Antenna Extension Cord DC-ANT-24DT DC-ANT-24DP DC-ANT-E-24DP 1.8 dBi 2 dBi -.5dB Type Part number Gain MEI 232/422/485 Switch Settings These switches set the MEI (multiple electrical interface) line protocol on the serial interface. Switch Setting Function Up Down Down Down EIA-422/485 full-duplex Down Up Down – If up, termination. EIA-485 half-duplex Down Down Up – If down, no termination EIA-232 13 DB-9 Connector *If switch 4 is up, termination. If down, no termination. Up/On Down/Off EIA-422/485 Full-Duplex EIA-232 EIA-485 Half-Duplex DB-9 Connector The figure and table provide information on DB-9 pin orientation and pin assignments. DB-9 Pin Orientation Pin 5 Pin 6 Pin 9 14 Digi Connect SP Hardware Reference 00000006 Pin 1 DB-9 Pin Assignments Pin EIA-232 EIA-422/485 Full-Duplex EIA-485 Half-Duplex DCD CTS- Not used RXD RXD+ RXD+ TXD TXD+ TXD+ DTR RTS- Not used GND GND GND DSR RXD- RXD- RTS RTS+ Not used CTS CTS+ Not used NA TXD- TXD- JTAG Interface The Digi Connect SP Development Kit is provided with the case opened, providing access to the JTAG interface which mates with a JTAG debugger plug (for example, the Macraigor Raven included in the kit). See the following table for pin assignments on the JTAG adapter block provided. JTAG Debugger Connector Pin Assignments Pin VCC+ Pin Pin GND /TRST Pin Pin GND TDI Pin Pin GND TMS Pin Pin GND TCK Pin 10 Pin 11 Pin 12 Pin 13 Pin 14 GND TDO /SRST VCC+ GND 15 Power Jack Digi Connect SP JTAG Debugger Connector Power Jack The Power Jack is a barrel connector that accepts 9 to 30 VDC +/- 5%. The jack is labeled as P11 on the development board. The following table shows the polarity of the power jack. Power Jack Polarity Contact Polarity Center +9 to +30 VDC Outer Ground The following figure schematically represents the polarity of the power jack. 16 Digi Connect SP Hardware Reference Power Jack Polarity, Schematic 17 Power Jack 18 Digi Connect SP Hardware Reference Programming Considerations This chapter discusses programming consideration for the Digi Connect SP and Digi Connect Wi-SP and the NS7520 processor it is based on. GPIO General Information The NS7520 processor supports 16 general purpose I/O (GPIO) pins, some of which are reserved for specific functions and some of which can be customized. These pins fall into three categories: Those labeled “Reserved” in the following table are dedicated to a specific use and must not be reprogrammed, or the unit may not operate correctly. Often, these pins are not connected to external interfaces. Those labeled “Allocated” in the following table are exposed to an external interface and allocated to a specific use by the software but can be customized safely with code modifications. Those labeled “Available” are exposed to an external interface, not controlled directly by the software, and can be customized. 19 GPIO GPIO Registers Two registers, named PORTA and PORTC, govern the 16 GPIO pins. Each register is responsible for eight pins, and each GPIO pin uses the following four bits to completely describe its behavior: Mode (CMODE) Direction (CDIR) Special function (CSF). This is only applicable to PORTC. Data value The first three bits describe the functionality of the GPIO pin. The data bit provides the current value of the pin when read and allows control of the value of an output pin when written. In order to configure a pin as either a GPIO input or GPIO output, the corresponding bit positions in the appropriate register must be configured according to the information in the following table: GPIO Configuration Input Output – CMODE = 0 – CMODE = 0 – CDIR = 0 – CDIR = 1 – CSF = 0 – CSF = 0 Since each register controls 8 GPIO pins, it is safest to read the full 32 bit register, modify the bits corresponding to the pin, and then write the full 32 bits back. In this way, the behavior of other GPIO pins will be preserved. For more information regarding the format and programming of the GPIO registers, see the NS7520 Hardware Reference. 20 Digi Connect SP Hardware Reference GPIO Pin Use GPIO Pin Use Register Bit Category External Interface Description PORTA7 - PORTA0 Reserved NA NA PORTC7 Reserved NA NA PORTC6 Allocated Connected to the red LED Used as a power indicator (always on). It could be reassigned as a general purpose LED. It must remain a GPIO output for the LED to operate correctly. The LED is lit when the signal is a logic "high." PORTC5 Available Connected to the reset button. It should be configured as a GPIO input. PORTC4 - PORTC0 Reserved NA NA LEDs General information The device server has two types of LEDs: LEDs connected directly to GPIO pins on the processor and controlled directly in software LEDs connected to other hardware components (normally the Ethernet hardware) and not directly programmable by the operating system The development kit supplies software to control the LEDs. This behavior can often be modified by manipulating the LED table in the BSP code. See gpio.c for details. As with any GPIO output, the GPIO register must be properly configured in order to assert values on the pin. The appropriate bits should be configured as: CMODE = 0 CDIR = 1 21 Flash CSF=0 About LEDs The device server has three LEDs: The green LED is wired directly to the Ethernet hardware and indicates that a link has been established. The yellow LED is wired directly to the Ethernet hardware and signals Ethernet activity. The red LED is software programmable. It is wired to processor GPIO register bit PORTC6. The LED is wired to be active high. The development kit software is implemented by default so that this LED reflects "power" (and is, therefore, always lit). Flash General Information Digi Connect SP and Digi Connect Wi-SP device servers each have 4 MB of flash memory, which is controlled by chip select 0, located at 0x02000000. Memory Digi Connect SP and Digi Connect Wi-SP device servers each have 16 MB of SDRAM memory, which is controlled by chip select 1, located at 0x00000000 in the processor address space and aliased at 0x04000000 and 0x08000000. The application program (EOS) is loaded at address 0x08080000. 22 Digi Connect SP Hardware Reference Reset Button The device servers have a push button connected to a GPIO pin. This pin is named "/INIT." In the processor, the GPIO register bit associated with "/INIT" is PORTC5. The GPIO pin will read as high normally, and low when the button is pushed. See "Reset Button" on page 12 for the external location. 23 Reset Button 24 Digi Connect SP Hardware Reference Specifications Network Interfaces Digi Connect SP RJ-45 connector 10/100Base-T Half- and full-duplex support Digi Connect Wi-SP Standard: IEEE 802.11b Data Rate: Up to 11 Mbps with automatic fallback WEP (64-bit and 128-bit encryption) WPA (Wi-Fi Protected Access)/WPA2/802.11i Frequency: 2.4 GHz Modulation: CCK (11/5 Mbps), DQPSK (2 Mbps), DBPSK (1 Mbps) Transmit power: 16 dBm typical Receive sensitivity: – 1Mbps: -92 dBm – 2Mbps: -89 dBm – 5.5Mbps: -87 dBm – 11Mbps: -82 dBm Antenna connector: RP-SMA 25 Serial Interface 10/100Base-T auto-sensing Half- and full-duplex support Serial Interface One EIA-232/422/485 switch-selectable serial port with full modem control. Data Rates (bps) 50, 110, 134, 150, 200, 300, 600, 1200, 2400, 3600, 4800, 9600, 19200, 38400, 57600, 115200, 230400 Flow Control Options RTS/CTS, XON/XOFF, None Environmental Ambient Temperature 26 Digi Connect SP Digi Connect Wi-SP -40oF to 185oF (-40oC to 85oC) -4oF to 185oF (-20oC to 85oC) Storage Temperature -400F to 2570F (-400C to 1250C) Humidty 5% to 90% Altitude 12000 feet (3657.60 meters) Digi Connect SP Hardware Reference Specifications Power Requirements Note: The Digi Connect SP and Digi Connect Wi-SP must be powered by a Listed LPS or Class II power supply rated 9-30 VDC, 0.37 A minimum. Mechanical DIgi Connect SP Length: 3.876 inches (9.846 cm) Width: 1.680 inches (4.267 cm) Height: 0.999 inches (2.537 cm) Unit Weight: 2.29 oz (64.92 g) Digi Connect Wi-SP Length: 4.188 inches ( 10.64cm) Width: 1.680 inches (4.267 cm) Height: 0.999 inches (2.537 cm) Unit Weight: 1.9 oz ( 53.86 g) 27 Antenna Information Antenna Information Antenna Strength The following diagram demonstrates the strength of the signal received by the antenna on both a horizontal and vertical plane. The diagram shows the magnetic field when the antenna is in a vertical position. The red line represents the horizontal plane and the dotted green lined represents the vertical plane. You can see in the illustration that at 90degrees, the signal strength is (as expected) 0. Radiation Patterns Antenna Details Antenna Description Dipole Desktop DC-ANT-24DP DC-ANT-24DT 2.4~2.5 GHz 2.4~2.5 GHz Power Output 2W 1W DB Gain 2 dBi 1.8 dBi Part Number Frequency 28 Digi Connect SP Hardware Reference Specifications Antenna Description Dipole Desktop < or = 2.0 1.92 max 10.0x108.5 mm 105 x4.5 mm 10.5g 11 g RP-SMA RP-SMA VSWR Dimension Weight Connector Antenna Restriction in North America Only antennas of the same type listed on the FCC grant, with equal or lower antenna gain, may be used with the Digi Connect Wi-SP. 29 Antenna Information Units: mm Desktop Antenna Dimensions 30 Digi Connect SP Hardware Reference Specifications Dipole Antenna Dimensions 31 RF Exposure Statement RF Exposure Statement The Digi Connect Wi-SP device complies with the RF exposure limits for humans as called out in RSS-102. It is exempt from RF evaluation based on its operating frequency of 2400 MHz, and effective radiated power of 100 milliwatts. This would be less than the 3 watt requirement for a mobile device (>20 cm separation) operating at 2400 MHz. In order to comply with FCC RF exposure limits, dipole antenna should be located at a minimum distance of 7.9 inches (20 cm) or more from the body of all persons. 32 Digi Connect SP Hardware Reference Specifications Overlay Specifications The following specifications are for the product overlays. Digi Connect Wi-SP Digi Connect SP 33 Overlay Specifications 34 Digi Connect SP Hardware Reference Certifications These products comply with the following standards. FCC Part 15 Class A Radio Frequency Interference (RFI) (FCC 15.105(a) The Digi Connect SP and Digi Connect Wi-SP have been tested and found to comply with the limits for Class A digital devices pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which the user will be required to correct the interference at his own expense. Labeling Requirements (FCC 15.19) This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 35 Industry Canada Modifications (FCC 15.21) Changes or modifications to this equipment not expressly approved by Digi may void the user's authority to operate this equipment. Cables (FCC 15.27) Shielded cables must be used to remain within the Class A limitations. Industry Canada This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le present appareil numerique n'emet pas de bruits radioelectriques depassant les limites applicables aux appareils numeriques de la class A prescrites dans le Reglement sur le brouillage radioelectrique edicte par le ministere des Communications du Canada. 36 Digi Connect SP Hardware Reference Certifications International EMC Standards The Digi Connect SP and Digi Connect Wi-SP meet the following standards. Standards Digi Connect Wi-SP Digi Connect SP AS/NZS 3548 CISPR 22 AS/NZS 3548 FCC Part 15 Subpart C (FCC ID: MCQ-50M1312) IC RSS 210 (IC:1846A-50M1312) ICES-003 Emissions EN 55022 EN 61000-3-2 EN 61000-3-3 EN 301 489- 3 EN 300 328 VCCI Immunity EN 55024 UL 60950-1 Safety CSA 22.2 No. 60950--1 EN 60950 37 International EMC Standards 38 Digi Connect SP Hardware Reference Change Log The following changes have been made since the last release of this document. Revision C Changed RAM from 8 MB to 16 MB. Added overlay drawings. Added desktop antenna information. Added Japan certification. 39 Revision C 40 Digi Connect SP Hardware Reference
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2005:04:26 14:38:52-05:00 Create Date : 2005:03:16 15:56:45Z Creator : FrameMaker 7.0 Keywords : 90000540_C Page Count : 42 Creation Date : 2005:03:16 15:56:45Z Mod Date : 2005:04:26 14:38:52-05:00 Producer : Acrobat Distiller 5.0.5 (Windows) Author : Digi International Metadata Date : 2005:04:26 14:38:52-05:00 Title : DigiConnectSP_Book.book Page Mode : UseOutlines Has XFA : NoEXIF Metadata provided by EXIF.tools