Digi Cm Users Manual

2015-02-04

• Introduction
  • Digi CM Model Support
  • Feature Overview
  • Feature Summary
  • User Groups
  • Root and Admin Usernames and Passwords
  • Adding Port Administrators and Users
  • Ways to Configure the Digi CM
  • Ways of Accessing the Digi CM: Overview
  • Web Interface Access Menu
  • Port Access Menu
  • Direct Port Access
  • Custom Menus
  • Port Escape Menu
  • Saving and Applying Changes
  • Automatic Device Recognition
• Getting Started
  • Introduction
  • Assigning IP Settings from the Console Port
  • Configuring HTTP and HTTPS
  • Configuring for SSH
  • Adding, Editing, and Removing Users
• Installing and Configuring PC Cards
  • Introduction
  • Compatible PC Cards
  • Adding a Compact-flash Card
  • Adding a Network Card
  • Adding a Wireless LAN Card
  • Adding a Serial Modem
• System and Port Logging
  • Introduction
  • Enabling Log Storage Location
  • Configuring System Logging
  • Configure Port Logging
• Configuring Ports
  • Introduction
  • Enabling and Disabling the Ports
  • Resetting Ports
  • Port Title
  • Configuring Automatic Device Recognition
  • Apply all Ports Settings
  • Host Mode Configuration
  • Configuring Host Mode
  • Supported Protocols
  • Serial Port Parameters
• Alerts and Notifications
  • Introduction
  • Configuring SMTP Alerts
  • SNMP Information
  • Traps
  • Configuring SNMP
  • Managing the SNMP Protocol
  • Configuring Port Event Handling
  • Config Alerts for Automatic Device Recognition (ADR)
• User Administration
  • Administering Users
• Configuring Security and Authentication
  • Introduction
  • Configuring Network IP Filtering
  • Configuring User Access Control
  • Authentication
  • Configuring Authentication Methods for Port Access
  • Configuring Authentication for the Web Server
• Custom and Default Menus
  • Introduction
  • Making Custom Menus
  • Default Menu
• Microsoft SAC Support
  • About Digi CM Support for Microsoft Windows Server 2003
  • Set Up Overview
  • Setting Up the Windows Server 2003 Port
  • Setting Up the Digi CM for SAC Support
  • Accessing the Windows Server 2003 Console Port from the Digi CM GUI
• Rackable Systems Management Card
  • Introduction
  • Set up
• Configuring Remote Dial-In Access
  • Introduction
  • Configuring For Dial-In Modem Access
  • Adding a PC Modem
  • Configuring For Dial-In Terminal Server Access
• Power Controller
  • Introduction
  • Installing Power Controller
  • Configuring Power Controller
  • Setting Alarms and Thresholds
  • Outlet Configuration
  • User Access for Power Controller
  • Power Controller Management
  • Cascading Multiple Digi RPM Units
• Port Clustering
  • Introduction
  • Configuring Port Clustering
• System Administration
  • Introduction
  • Upgrading the Firmware
  • Configuration Management
  • Automatically Upgrading the Digi CM Firmware or Configuration using TFTP
  • Resetting Factory Defaults
  • Setting Date and Time
  • Configuring a Host Name
• Command Line Interface
  • Introduction
  • Linux Commands
  • Important File Locations
  • Example Scripts
  • User Administration
• Configuration Menu
  • Accessing the Configuration Menu
  • Configuring SSH
  • Adding, Editing, and Removing Users
  • Adding and Configuring a PC Card
  • Host Mode Configuration
  • Port Parameters
  • Port Access Menu
  • System Logging
  • Configuring SNMP
  • Configuring SMTP
  • Network IP Filtering
  • Port IP Filtering
  • Sniff Sessions
  • Authentication
  • Dial-in Modem Access
  • Dial-in Terminal Server Access
  • Clustering
  • Firmware Upgrade
  • Restoring Factory Defaults
  • Setting Date and Time
  • Accessing the Boot Loader Program
• Hardware Information
  • Introduction
  • Hardware Specifications
  • LED Indicators
  • About Serial Port Cabling
  • Serial Port Pinouts
  • Cable Adapters
  • Ethernet Pinouts
  • Rack Mounting Installation
• Certifications
  • Safety
  • Emissions
  • Immunity
  • Solaris Ready