Digi XSTICK2 XStick ZNet 2.5 User Manual XStick ZNet 2 5 Certifications Card

Digi International Inc XStick ZNet 2.5 XStick ZNet 2 5 Certifications Card

Contents

User Manual Addendum

This equipment has been tested and
found to comply with the limits for Class B
digital devices pursuant to Part 15 Subpart B,
of the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
environment. This equipment generates,
uses, and can radiate radio frequency
energy, and, if not installed and used in
accordance with the instruction manual, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try and correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and the receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
(1) this device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Modifications (FCC 15.21)
Changes or modifications to this equipment
not expressly approved by Digi may void the
user's authority to operate this equipment.
Industry Canada
Declaration of Conformity
(in accordance with
FCC Dockets 96-208 and 95-19)
Manufacturer's Name:
Digi International
Corporate
Headquarters:
11001 Bren Road East
Minnetonka MN 55343
Manufacturing 10000 West 76th Street,
Headquarters: Eden Prairie MN 55344
FCC Part 15 Class B
Radio Frequency Interference (RFI)
(FCC 15.105)
Labeling Requirements (FCC 15.19)
This device complies with Part 15 of FCC rules.
Operation is subject to the following two
conditions:
FCC Part 15 Class B
Radio Frequency Interference (RFI)
(FCC 15.105)
Declaration of Conformity
(in accordance with
FCC Dockets 96-208 and 95-19)
Manufacturer's Name:
Digi International
Corporate
Headquarters:
11001 Bren Road East
Minnetonka MN 55343
Manufacturing 10000 West 76th Street,
Headquarters: Eden Prairie MN 55344
PN:(1P)
A
90000935-88
PN:(1P)
A
90000935-88
Digi International declares, that the product:
Product Name:
XStick ZNet 2.5 50001547-xx
to which this declaration relates, meets the
requirements specified by the Federal
Communications Commission as detailed in
the following specifications:
- Part 15, Subpart B, for Class B Equipment
- FCC Docket 96-208 as it applies to Class B
- Personal computers and peripherals
The product listed above has been tested at
an External Test Laboratory certified per
FCC rules and has been found to meet the
FCC, Part 15, Class B, Emission Limits.
Documentation is on file and available from the
Digi International Homologation Department.
International EMC Standards
This product meets the following
electromagnetic emissions standards:
-
AS/NZS CISPR 22
- VCCI
- ICES-003
- EN 55022
- EN 55024
Safety Standards
- UL/CUL 60950-1
- IEC/EN 60950-1
- CSA
This product meets the following safety standards:
Certifications and Agency Approvals
- United States (FCC Part 15.247):
FCC ID: MCQ-XSTICK2
- Industry Canada (IC): IC: 1846A-XSTICK2
- Europe (CE): ETSI
This Class B digital apparatus complies with
Canada ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
-ICES-003 Annex.
Operation is subject to the following two
conditions:
(1) this device may not cause interference,
and
(2) this device must accept any interference,
including interference that may cause
undesired operation of the device.
This equipment has been tested and
found to comply with the limits for Class B
digital devices pursuant to Part 15 Subpart B,
of the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
environment. This equipment generates,
uses, and can radiate radio frequency
energy, and, if not installed and used in
accordance with the instruction manual, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try and correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and the receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
(1) this device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Modifications (FCC 15.21)
Changes or modifications to this equipment
not expressly approved by Digi may void the
user's authority to operate this equipment.
Industry Canada
Labeling Requirements (FCC 15.19)
This device complies with Part 15 of FCC rules.
Operation is subject to the following two
conditions:
This Class B digital apparatus complies with
Canada ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
-ICES-003 Annex.
Operation is subject to the following two
conditions:
(1) this device may not cause interference,
and
(2) this device must accept any interference,
including interference that may cause
undesired operation of the device.
Digi International declares, that the product:
Product Name:
XStick ZNet 2.5 50001547-xx
to which this declaration relates, meets the
requirements specified by the Federal
Communications Commission as detailed in
the following specifications:
- Part 15, Subpart B, for Class B Equipment
- FCC Docket 96-208 as it applies to Class B
- Personal computers and peripherals
The product listed above has been tested at
an External Test Laboratory certified per
FCC rules and has been found to meet the
FCC, Part 15, Class B, Emission Limits.
Documentation is on file and available from the
Digi International Homologation Department.
International EMC Standards
This product meets the following
electromagnetic emissions standards:
-
AS/NZS CISPR 22
- VCCI
- ICES-003
- EN 55022
- EN 55024
Safety Standards
- UL/CUL 60950-1
- IEC/EN 60950-1
- CSA
This product meets the following safety standards:
Certifications and Agency Approvals
- United States (FCC Part 15.247):
FCC ID: MCQ-XSTICK2
- Industry Canada (IC): IC: 1846A-XSTICK2
- Europe (CE): ETSI

Navigation menu