Digigram CANCUN Professional USB Audio Interface User Manual Manual
Digigram Professional USB Audio Interface Manual
Digigram >
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1747628 |
| Application ID | f84vdLmIdnyvva9baInh8g== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 213.85kB (2673136 bits) |
| Date Submitted | 2012-07-19 00:00:00 |
| Date Available | 2012-07-20 00:00:00 |
| Creation Date | 2012-05-09 08:55:28 |
| Producing Software | iText 2.1.6 by 1T3XT |
| Document Lastmod | 2012-05-09 08:55:28 |
| Document Title | Manual |
| Document Creator | Documill Publishor 6.3.10.1 by Documill (http://www.documill.com/) |
CANCUN 222-Mic CANCUN 442-Mic Professional USB Audio Interface Preliminary version v0.99 User manual For technical support, please contact your supplier www.digigram.com Digigram S.A. Parc de Pré Milliet, 38330 Montbonnot - FRANCE Tel: +33 (0)4 76 52 55 01• Fax: +33 (0) 4 76 52 53 07• E-mail: info@digigram.com Digigram Asia Pte Ltd. 60 Albert Street - #19-11OG Albert Complex Singapore 189969, Singapore Tel : +65 6291 2234 • Fax : +65 6291 3433 • E-mail : info_asia@digigram.com INFORMATION FOR THE USER IMPORTANT NOTICE FEATURES Cancun 222-Mic and CANCUN 442-Mic main hardware features CANCUN 222-Mic CANCUN 442-Mic Software features HARDWARE REQUIREMENTS SUPPORTED OPERATING SYSTEMS HARDWARE INSTALLATION SOFTWARE INSTALLATION OF CANCUN UNDER WINDOWS SETTING AND MONITORING CANCUN PARAMETERS FROM THE CONTROL PANEL Starting the control panel Configuration of Preferences Configuration of audio inputs parameters Adjusting the gains on the analog inputs and displaying vu-meters Input pad and 48V phantom power Displaying the signal level on the AES/EBU input(s) Adjusting the gains on the analog outputs and displaying vu-meters Displaying the signal level on the AES/EBU output(s) Configuration of headphone output parameters SETTING CANCUN PARAMETERS FROM THE CANCUN TOUCH PANEL Input gains setting Pad Variable analog input gain Output gains settings 48V phantom power SPECIFICATIONS Configuration Audio specifications Inputs Outputs Analog audio performances External Connectors Delivered Cables Environments CANCUN 222-Mic CABLE CANCUN 222-Mic cable schematic CANCUN 222-Mic Wiring diagram CANCUN 222-Mic cable pinout CANCUN 442-Mic CABLE CANCUN 442-Mic cable schematic CANCUN 442-Mic Wiring diagram CACUN 442-Mic cable pinout 4 INFORMATION FOR THE USER The user’s manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions contained in this data sheet, may cause harmful interference to radio and television communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * reorient or relocate the receiving antenna * increase the separation between the equipment and the receiver * connect the equipment into an outlet on a circuit different from that of the receiver * consult the dealer or an experienced audio television technician. Note: Connecting this device to peripheral devices that do not comply with CLASS B requirements or using an unshielded peripheral data cable could also result in harmful interference to radio or television reception. The user is cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. To ensure that the use of this product does not contribute to interference, it is necessary to use shielded I/O cables. IMPORTANT NOTICE This device has been tested and found to comply with the following standards: · International: CISPR22 Class B · Europe: EMC 89/336/CEE (1992) specifications. · United States: FCC Rules-Part 15-Class B (digital device). For best compliance with these standards, Digigram recommends to use audio shielded cables shorter than three meters. FEATURES CANCUN 222-Mic and CANCUN 442-Mic are professional audio interface for USB ports (compatible with USB 2.0 and USB 3.0 hosts). They are powered via USB. In some configurations (typically when using several static microphones, it may be necessary to connect the CANCUN device to two different USB Ports so as to get enough current from the PC). CANCUN devices are delivered with a ‘Y’ USB cable allowing powering the device from two USB ports. Cancun 222-Mic and CANCUN 442-Mic main hardware features ● ● ● ● ● ● ● ● ● ● ● Simultaneous analog & AES I/Os in a compact form factor A/D and D/A conversions 24-bit / frequency : 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 192 kHz Excellent MIC preamp (55dB gain, from -60 dBu sensitivity, typical -105 dB THD+N, and -128 dB EIN) Switchable 48V phantom power (7 mA Max on each input) Adjustable analog input gain from 0 to 55 dB, by 1 dB steps Switchable -30 dB input signal Pad (level attenuator) Maximum analog input signal: +25 dBu Guaranteed low latency (<4 mS) on both Windows™ and Mac OSX™ platforms Ergonomically advanced user interface for quick setup and efficient monitoring on both Windows™ and Mac OSX™ platforms Innovative hardware controls with LED-lighted touch panel Neutrik™ XLR connectivity and break-out cable CANCUN 222-Mic · · · · · 2 balanced analog mono line/mic inputs, +25 dBu max signal level 2 balanced analog mono line outputs, +10 dBu max signal level 1 additional balanced stereo AES/EBU input 1 additional balanced stereo AES/EBU output 1 stereo headphone output on female 6.35mm jack CANCUN 442-Mic ● ● ● ● ● 4 balanced analog mono line/mic inputs, +25 dBu max signal level 4 balanced analog mono line outputs, +10 dBu max signal level 2 additional balanced AES/EBU inputs 2 additional balanced AES/EBU outputs 1 stereo headphone output on female 6.35mm jack Software features ● ● ● ● ● ● ● ● CANCUN 222-Mic and CANCUN 442-Mic comply with the USB Audio 2.0 specification Simultaneous record and playback on all the audio I/Os Supported formats: PCM 8, 16, 24 bits DirectSound devices CANCUN 222-Mic: 2 stereo input devices (1 analog, 1 AES/EBU) CANCUN 442-Mic: 4 stereo output devices (2 analog, 2 AES/EBU) ASIO devices CANCUN 222-Mic: 4 mono input devices (2 analog, 2 AES/EBU) CANCUN 442-Mic: 8 mono output devices (4 analog, 4 AES/EBU) Control Panel GUI for quick setup and efficient monitoring on both Windows™ and Mac OSX™(*) platforms Mixing of the inputs and playback ouputs to the headphone output Host platform Control Panel synchronized with CANCUN touch panel As Windows operating systems don’t feature the USB Audio 2.0 compatibility, it is necessary to install a driver package. CANCUN devices are visible as DirectSound and ASIO devices. CANCUN is also compatible with Kernel Streaming applications. HARDWARE REQUIREMENTS · A USB port (standard 2.0 or higher) SUPPORTED OPERATING SYSTEMS · · · Windows XP, Windows Seven (32-bit and 64-bit) Mac OS X Linux(*) * Not available yet. Will be available by software upgrade HARDWARE INSTALLATION Connect the mini-B USB connector of the provided USB cable to the mini-B USB port located underneath CANCUN. Connect the standard type A male USB connector of the provided USB cable to a USB port (USB 2.0) or your computer. It will then automatically be detected by the operating system. Under Windows operating systems, it is necessary to install the driver package for Windows (because Windows OS don’t support USB Audio 2.0). Note: If you have several USB peripherals connected to the same USB controller of your computer, they may consume more energy than the USB controller can provide. In this case, disconnect some of these peripherals. SOFTWARE INSTALLATION OF CANCUN UNDER WINDOWS The first time you connect your Cancun device to your computer, it is necessary to install its driver, as USB Audio 2.0 is not supported yet by Windows operating systems Connect your Cancun device to a free USB port of your computer. Execute the driver installation package you have downloaded from Digigram WEB site, and proceed as follows. Click on Next. Accept the License Agreement, and click on Next. By default, driver files are installed in folder C:\Program Files\Digigram CANCUN. Select another folder if you want, and click on Install. Wait during the installation of the driver. When the message “Preinstallation was successful. Click Next” to continue” is displayed, click on Next. Click on Finish to finish the installation procedure. The Cancun DirectSound devices are now listed in the Windows “Sound” control panel, in “Playback” and “Record” tabs. The ASIO devices can be selected from any ASIO application. 10 SETTING AND MONITORING CANCUN PARAMETERS FROM THE CONTROL PANEL Starting the control panel Cancun parameters can be set from its control panel. To open Cancun control panel, go in Start menu, Programs, Digigram CANCUN, and select Cancun Control Panel. Note that the Control Panel is automatically opened when connecting the CANCUN to the PC (provided that the driver has been installed under Windows). Four main groups of parameters are accessible from the Control Panel bottom bar: ● ● ● ● Preferences: Clock selection, buffer size (latency), opacity of the Control Panel display, presets. Parameters for the audio inputs (adjustable gains, vu – meters, Mute, PAD, 48V phantom power) . Parameters for the audio outputs (adjustable gains, vu –meters,) Parameters for the headphone output (adjustable attenuation, Left/right balance, mix of input signals). Configuration of Preferences 11 Click on to set the global parameters of CANCUN. Cards: allows select the CANCUN device to set its parameters. Clocks: allows selecting the sampling clock: · Internal: sampling clock is generated internally · AES1: sampling clock is extracted from digital input AES1. Without digital signal connected to the input “AES 1”, AES1 clock selection is displayed as “not valid”. · Buffers: these parameters allow adjusting the latency of the CANCUN device. · Streaming: this is the lowest level of buffering, which impacts the latency in DirectSound as well as in ASIO. Possible selections are: min latency, low latency, standard, relax, safe, extra safe. · ASIO: this is the buffering used by the ASIO driver, in samples. Possible values are: 64, 128, 256, 512, 1024, 2048, 4096, 8192 samples. The minimum selectable value depends on the parameter “Streaming”. When “Streaming” is set to “low latency” , all values are allowed. When “Streaming” is set to “extra safe”, values higher or equal to 2048 samples can be selected. Note: minimum latency settings require good PC performances. Configuration Save Click on “Save” to save the current parameter configuration (settings are saved as an XML file). Configuration Restore Click on “Restore” to load presets (XML file). Opacity: this parameter allows adjusting the transparency of the Control Panel GUI. Available choices are: opaque, 30%, 50%. Note: - This panel is opened when selecting the “ASIO configuration” from an ASIO software application. - Be aware that certain applications (e.g. Reaper) do not allow direct editing of CANCUN configuration menu; in this case, the CANCUN menu should be accessed through the application audio configuration menu which in turn launches CANCUN Configuration of audio inputs parameters Adjusting the gains on the analog inputs and displaying vu-meters 12 panel. Click on to set the parameters of audio inputs. Each slider allows adjusting the analog gain for an analog input from 0dB to + 55 dB, by 1 dB steps. It is possible to adjust the level of several inputs at the same time, by moving only one slider. To do so, press “Shift + Click” on each slider. The cursor of the slider becomes purple. When all the selected sliders are purple, just move one of them. All the sliders move at the same time The vu-meters display the signal level after the analog to digital conversion. The peak-meter instantaneous value is displayed right above the vu-meter. To mute an input, click on the corresponding Mute icon ON when icon is red . Mute is Input pad and 48V phantom power Click on the icon on the top left of the ANALOG panel to display the panel allowing to set Pad and 48V on the inputs. Pad is a fixed attenuator stage (-30 dB) available on each input, that can be enabled/disabled. To enable the Pad on an input channel, click on the OFF button on the right of PAD for the selected channel. When Pad is enabled on a channel, the button is displayed as follows: Audio alignment when Pad is OFF. Alignment when slider is set to 0 dB: -5.2 dBu -> 0dBfs Alignment when slider set to 55 dB: -60.2 dBu -> 0dBfs Audio alignment when Pad is ON. Alignment when slider is set to 0 dB: +25.6 dBu -> 0dBfs Alignment when slider set to 55 dB: -29.4 dBu -> 0dBfs Set Pad to OFF when using microphones. When using static microphones, it is necessary to enable the 48 V phantom power on the input the mic is connected to. To activate the 48V phantom power on an input, click on the OFF button on the right of 48V for the concerned input: 13 . When 48V is enabled on an input, the button is displayed as follows: Note that any modification of the Pad from the software Control Panel is reflected on the touch pad of Cancun, and vice versa. Displaying the signal level on the AES/EBU input(s) Click on the icon , on the bottom right of the “ANALOG” window, to view the digital level on the inputs signals. A vumeter is displayed for each input channel, which gives the digital level of the signal on the digital input, expressed in dBfs (0dBfs is the maximum value of a digital sample). To hide the digital levels panel, click on the icon 14 Adjusting the gains on the analog outputs and displaying vu-meters Click on the icon to set the parameters for audio outputs. For each output, the volume slider allows adjusting the analog attenuation, 0dB to - 72 dB, by 1 dB steps. It is possible to adjust the volume of several outputs at the same time, by moving only one slider. To do so, press “Shift + Click” on each slider. The cursor of the slider becomes purple. When all the selected sliders are purple, just move one of them. All the sliders move at the same time. Output alignment is as follows: Slider set to 0 dB: 0 dBfs -> +10dBu Slider set to -72 dB: 0 dBfs -> -62dBu The vu-meters display the signal level before the digital to analog conversion. The peak-meter instantaneous value is displayed right above the vu-meter. To mute an output, click on the corresponding Mute icon Mute is ON when icon is red Displaying the signal level on the AES/EBU output(s) Click on the icon , on the bottom right of the “ANALOG” window, to view the digital level on the outputs signals. A vumeter is displayed for each input channel, which gives the digital level of the signal on the digital output, expressed in dBfs (0dBfs is the maximum value of a digital sample). To hide the digital levels panel, click on the icon 15 Configuration of headphone output parameters Click on the icon to adjust the settings of the headphones output. The central fader allows adjusting the signal level on the headphones output. The horizontal cursor, in top of the main fader, allows adjusting the balance between left and right channels. The heaphones output receives a mix composed of: - all the inputs (analog and AES/EBU) - all the audio played on CANCUN output devices (playback from software applications). The level of each signal on the input of the mixer can be adjusted from the left window, as well as the panoramic. ANALOG INPUT section This section allows adjusting the levels of the signals on the analog inputs right before the mixer. For each signal, the central fader controls the signal level, and the upper horizontal slider controls the panoramic between left and right output channels. The signal can be selected in solo muted , and can be ANALOG OUTPUT section This section allows adjusting the levels of the signals played on the outputs from a software application. For each signal, the central fader controls the signal level, and the upper horizontal slider controls the panoramic between left and right output channels. The signal can be selected in solo muted , and can be Click on the icon on the top left of the central headphones window to access the levels adjustment for the digital signals of the AES/EBU inputs, from the section DIGITAL INPUT. Click on the icon on the bottom left of the central headphones window to access the DIGITAL OUTPUT section, for adjusting the levels of the signals played on the AES/EBU outputs from a software application. 16 17 SETTING CANCUN PARAMETERS FROM THE CANCUN TOUCH PANEL Input gains setting Pad Press the Pad touch button to enable/disable the fixed attenuation on the desired. When PAD is ON, a green led appears. An attenuation of -30.0 dB is applied to the analog input signal. When PAD is OFF, the LED is turned off. No attenuation is applied. Note that the Pad status is reflected in the software Control Panel. Variable analog input gain The analog input gain is adjustable with the upper rotary button when: · the IN/OUT touch button on the right of the rotary button is in position IN (green led in front of IN) · and the touch button on the left of the rotary wheel is active (green led). Pressing the button several times allows selecting analog input 1, analog input 2, both inputs, or no input (LED turned off). The analog gain adjustment is then applied to the selected input(s). Note that moving the rotary button automatically updates the fader position in the software control panel for the concerned channels. 18 Output gains settings The analog output gain is adjustable with the upper rotary button when: · the IN/OUT touch button on the right of the rotary button is in position OUT (green led in front of OUT) · and the touch button on the left of the rotary wheel is active (green led). Pressing the button several times allows selecting analog output 1, analog output 2, both outputs, or no output (LED turned off). The analog gain adjustment is then applied to the selected output(s). Note that moving the rotary button automatically updates the fader position in the software control panel for the concerned channels. 48V phantom power In case you are using a static microphone on an analog input, it is necessary to activate the 48V phantom power on this input. Press the “48v” touch button of the concerned input. 48v phantom power is enabled when a red LED appears. It is disabled otherwise. Note: in case several static microphones are used, it may be necessary to connect the Cancun to a second USB controller of the PC so as to get enough current (a single USB controller may not provide enough current). 19 20 SPECIFICATIONS Configuration Bus Format USB 2.0 / Compliant with the USB 2.0 Audio specification Size 254 mm x 96 mm x 36 m Operating : temp / Humidity 0°C to +50°C / 0 % to 90 % (non condensing) Audio specifications A/D and D/A converters resolution 24 bits Sampling frequencies available 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 192 kHz Audio formats supported PCM 8, 16, 20, and 24 bits Latency 3.4 mS Analog-to-PC or PC-to-Analog (Windows 7 / 64 bits) 3.8 mS Analog-to-MAC or MAC-to-Analog (Mac OS X 10.6.8) ADAT / S/PDIF 24-bit/192kHz ADAT * * Not available yet. Will be available by software upgrade Inputs Analog line inputs (mono) Maximum input level/ impedance Programmable input gain Input Pad CANCUN 222-Mic CANCUN 442-Mic 2 balanced 4 balanced Line: +25 dBu / >3.5 kOhms Mic: -5 dBu / >2 kOhms Line: +25 dBu / >3.5 kOhms Mic: -5 dBu / >2 kOhms From 0 to 55 dB by 1 dB steps From 0 to 55 dB by 1 dB steps - 30 dB switchable on each analog input - 30 dB switchable on each analog input Line (PAD On): 0 dBfs adjustable from -30 dBu to +25 dBu Mic (PAD Off): -60 dBu to -5 dBu Line (PAD On): 0 dBfs adjustable from -30 dBu to +25 dBu Mic (PAD Off): -60 dBu to -5 dBu Digital inputs (stereo) 1 AES/EBU (AES3-2003) compliant 2 AES/EBU (AES3-2003) compliant AES11 synchronization Yes, on AES 1 Input Yes, on AES 1 Input ADAT / S/PDIF* ADAT / S/PDIF* Input sensitivity Other inputs 21 * Not implemented yet. This will be available by software upgrade. Outputs CANCUN 222-Mic CANCUN 442-Mic 2 balanced 4 balanced +10 dBu / 2x33 Ohms +10 dBu / 2x33 Ohms 1 AES/EBU 2 AES/EBU From 0 to -72 dB by 1 dB steps From 0 to -72 dB by 1 dB steps Dedicated output stage, >10 mW from 32 to 600 Ohms Bandwidth: 10Hz-20 kHz +-0.1 dB Dynamic range : 93 dB @32 Ohms, typical Dedicated output stage, >10 mW from 32 to 600 Ohms Bandwidth: 10Hz-20 kHz +-0.1 dB Dynamic range : 93 dB @32 Ohms, typical ADAT / S/PDIF* ADAT / S/PDIF* Analog line outputs (mono) Maximum output level/ impedance Digital outputs (stereo) Programmable output attenuation Headphones output Other outputs * Not implemented yet. This will be available by software upgrade. Analog audio performances Cancùn 222-Mic and 442-Mic Frequency response (A/D Input) · · · 20 Hz–20 kHz +0/-0.5 dB @48 kHz 20 Hz–40 kHz +0/-0.6 dB @96 kHz 20 Hz–80 kHz +0/-2.0 dB @192 kHz S/N (A/D Input) · S/N: 111 dBA - 108 dB unweighted @48 kHz, typical THD + noise, ref 1 kHz at –3 dBfs (A/D Input) · · -105 dB THD+N / 20 Hz-20 kHz @48 to 192 kHz, typical -107 dBA THD+N / 20 Hz-20 kHz @48 kHz to 192 kHz, typical Mic inputs E.I.N. · -128 dB EIN / Zsource = 40 Ohms; Pad Off; gain 55 dB, typical Frequency response (D/A Ouput) · · · 10 Hz–20 kHz +0/-0.1 dB @48 kHz 10 Hz–40 kHz +0/-0.3 dB @96 kHz 10 Hz–80 kHz +0/-1.3 dB @192 kHz S/N (D/A Output) · S/N: -111 dB unweighted @48 kHz, typical THD + noise, ref 1 kHz at –1 dBfs (D/A Output) · -98 dB THD+N / 20 Hz-24 kHz @48 kHz to 192 kHz, typical Channel phase difference (A/D Input and D/A Output) · +- 0.2° / 20 Hz-20 kHz Jitter, jitter sensitivity and jitter suppression · AES3 (AES3-2003) compliant Latency · · 3.4 mS Analog-to-PC or PC-to-Analog (Windows 7 / 64 bits) 3.8 mS Analog-to-MAC or MAC-to-Analog (Mac OS X 10.6.8) 22 External Connectors CANCUN 222-Mic CANCUN 442-Mic 25 pin Sub-D (compatible with DB25 YAMAHA DIGITAL) XLR female for analog input 1 44 pin Sub-D HD XLR female for analog input 1 6.35mm jack 6.35mm jack Optical* Optical* mini-B USB on card side Standard, includes two A-type on PC side, one mini-B USB on card side Standard, includes two A-type on PC side, one Analog and digital I/ Os Headphone output ADAT / S-PDIF USB * Functionality not implemented yet. This will be available by software upgrade. Delivered Cables Analog and digital I/ Os CANCUN 222-Mic CANCUN 442-Mic Breakout cable 25 pin Sub-D to 6 XLRs Neutrik (c) Breakout cable 44 pin Sub-D HD to 12 XLRs Neutrik (c) ‘Y’ cable composed of a mini-B USB on CANCUN side, and two A-type on PC side USB ‘Y’ cable composed of a mini-B USB on CANCUN side, and two A-type on PC side Environments CANCUN 222-Mic Supported operating systems Windows XP, Windows Seven 32 and 64 bits, Mac OS X, Linux Management Windows XP: DirectSound, ASIO, Digigram np SDK through Virtual PCX Windows Seven; DirectSound, ASIO, Core Audio, WASAPI, Digigram np SDK via Virtual PCX Mac OS X: CoreAudio Linux: Alsa* * Functionality not implemented yet. This will be available by software upgrade. 23 CANCUN 222-Mic CABLE CANCUN 222-Mic cable schematic CANCUN 222-Mic Wiring diagram CANCUN 222-Mic cable pinout 24 Pin# Signal Pin# Signal ANALOG IN1 Left + 14 ANALOG IN1 Left - ANALOG IN2 Right + 15 ANALOG IN2 Right - Not connected 16 Not connected AES IN1 + (AES SYNCHRO) 17 AES IN1 - (AES SYNCHRO) ANALOG OUT1 Left + 18 ANALOG OUT1 Left - ANALOG OUT2 Right + 19 ANALOG OUT2 Right - Not connected 20 Not connected AES/EBU OUT + 21 AES/EBU OUT - Not connected 22 GND 10 GND 23 GND 11 Not connected 24 GND 12 GND 25 GND 13 GND 25 CANCUN 442-Mic CABLE CANCUN 442-Mic cable schematic 26 CANCUN 442-Mic Wiring diagram 27 CACUN 442-Mic cable pinout Pin# Signal Pin# Signal ANALOG IN4 Right + 23 GND ANALOG IN4 Right - 24 GND ANALOG IN3 Left + 25 Not connected ANALOG IN3 Left - 26 GND ANALOG OUT1 Left + 27 GND ANALOG OUT1 Right + 28 GND ANALOG OUT3 Left + 29 GND ANALOG OUT3 Left - 30 AES/EBU IN2 + Not connected 31 ANALOG IN1 Left + 10 AES/EBU IN1 + (AES Synchro) 32 ANALOG IN1 Left - 11 AES/EBU IN1 - (AES Synchro) 33 ANALOG IN2 Right + 12 GND 34 ANALOG IN2 Right - 13 GND 35 ANALOG OUT2 Right + 14 AES/EBU OUT2 - 36 ANALOG OUT2 Right - 15 AES/EBU OUT2 + 37 ANALOG OUT4 Right + 16 GND 38 ANALOG OUT4 Right - 17 GND 39 Not connected 18 GND 40 Not connected 19 GND 41 Not connected 20 GND 42 AES/EBU OUT1 + 21 GND 43 AES/EBU OUT1 - 22 GND 44 AES/EBU IN2 - 28
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Format : application/pdf Producer : iText 2.1.6 by 1T3XT Create Date : 2012:05:09 08:55:28-07:00 Modify Date : 2012:05:09 08:55:28-07:00 Creator Tool : Documill Publishor 6.3.10.1 by Documill (http://www.documill.com/) Page Count : 28 Creator : Documill Publishor 6.3.10.1 by Documill (http://www.documill.com/)EXIF Metadata provided by EXIF.tools