Digigram VX442 Professional Audio Card User Manual User manual vx442

Digigram Professional Audio Card User manual vx442

Users Manual

FCC ID: IGTPVX4421 USER’S MANUALThis is a copy of the fourth page of the user’s manuals, where the FCC statement is included :1.1 VX442 user's manualD g r a mINFORMATION FOR THE USER This device complies with part 15 of FCC rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) This device mustaccept any interference received, including interference that may cause undesiredoperation.This equipment has been tested and found to comply with the limits for a CLASS B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed andused in accordance with the instructions contained in this data sheet, may cause harmfulinterference to radio and television communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:• reorient or relocate the receiving antenna• increase the separation between the equipment and the receiver• connect the equipment into an outlet on a circuit different from that of the receiver• consult the dealer or an experienced audio television technician.NOTE: Connecting this device to peripheral devices that do not comply with CLASS Brequirements or using an unshielded peripheral data cable could also result in harmfulinterference to radio or television reception. The user is cautioned that any changes ormodifications not expressly approved by the party responsible for compliance could voidthe user’s authority to operate this equipment. To ensure that the use of this product doesnot contribute to interference, it is necessary to use shielded I/O cables.IMPORTANT NOTICE This card has been tested and found to comply with the following standards:• International: CISPR22 Class B.• Europe: EMC 89/336/CEE (1992) specifications.• United States: FCC Rules-Part 15-Class B (digital device).In order to guarantee compliance with the above standards in an installation, the followingmust be done:• the provided cable must not be modified.• additional cables used must have their respective shield connected to eachextremity.• The cable connected to the digital I/O must be equipped with a EMI ferrite core ofthe type WURTH ELEKTRONIK ref: 742 711 1 (or equivalent), located close to theSUB-D9 HD connector.

Navigation menu