Digigram VX442 Professional Audio Card User Manual User manual vx442

Download:
Mirror Download [FCC.gov]
Document ID	296651
Application ID	rrtL6t9hSDfOHbxhZ5AGGw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	34.42kB (430304 bits)
Date Submitted	2003-01-17 00:00:00
Date Available	2003-01-17 00:00:00
Creation Date	2002-12-20 08:48:19
Producing Software	Acrobat PDFWriter 4.0 pour Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	User_manual_vx442.PDF
Document Creator	Microsoft Word
Document Author:	labo

FCC ID: IGTPVX442
USER’S MANUAL
This is a copy of the fourth page of the user’s manuals, where the FCC statement is included :
1.1
VX442 user's manual
D gram
INFORMATION FOR THE USER
This device complies with part 15 of FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a CLASS B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions contained in this data sheet, may cause harmful
interference to radio and television communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• reorient or relocate the receiving antenna
• increase the separation between the equipment and the receiver
• connect the equipment into an outlet on a circuit different from that of the receiver
• consult the dealer or an experienced audio television technician.
NOTE: Connecting this device to peripheral devices that do not comply with CLASS B
requirements or using an unshielded peripheral data cable could also result in harmful
interference to radio or television reception. The user is cautioned that any changes or
modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate this equipment. To ensure that the use of this product does
not contribute to interference, it is necessary to use shielded I/O cables.
IMPORTANT NOTICE
This card has been tested and found to comply with the following standards:
• International: CISPR22 Class B.
• Europe: EMC 89/336/CEE (1992) specifications.
• United States: FCC Rules-Part 15-Class B (digital device).
In order to guarantee compliance with the above standards in an installation, the following
must be done:
• the provided cable must not be modified.
• additional cables used must have their respective shield connected to each
extremity.
• The cable connected to the digital I/O must be equipped with a EMI ferrite core of
the type WURTH ELEKTRONIK ref: 742 711 1 (or equivalent), located close to the
SUB-D9 HD connector.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 1
Creator                         : Microsoft Word
Create Date                     : 2002:12:20 08:48:19
Title                           : User_manual_vx442.PDF
Author                          : labo
Producer                        : Acrobat PDFWriter 4.0 pour Windows

EXIF Metadata provided by EXIF.tools