Digital Device DIR-908S Digital Voice Recorder User Manual

Digital Device Inc. Digital Voice Recorder

User Manual

Rev. 1.0               DIGITAL VOICE RECORDER Recording time Model                 SP                 LP     (Standard Play Mode)      (Long Play Mode) DIR-908S               240min             540min
Key Features * LCD Display : shows the status of voice recorder * Long recording time : LP Mode /Max 540min * 99 messages per folder (Max 396 messages)* Automatically turns off when not in use * Recording mode selection : SP/ LP * Checks the available recording time left * VOX :  When there is no sound input for 5 minutes during recording ,voice recorder automatically turns to stand-by mode * External input /output jack : provides interactive recording between voice recorder and other equipment   such as computer and audio * Auto play search : playback all messages for 5 seconds* Digital volume control : 16 steps sound volume control * Display sound level during recording and playback .-1-
Parts Identification * TOP    *Front  *Left  *RightLCD(Liquid Crystal Display) Description             -2-  LCD •.
Functions              Play/Stop button : When play ,record /stop playback ,record / playback  PLAY <<     >> <<  >> : When REW /FF during playback REW  FF   REC : Recording start /stop    REC   Mode button :When institute mode  MODE     • •  •   :  Volume UP/DOWN  -3-     •
Installing /Replacing batteries   Be sure to replace batteries in stop mode 1. To open the battery cover , press •     and then slide it off.    Insert two AAA(LR03) batteries     according to the polarity indication     and then slide the cover back into For power on     place. *Press Play button Battery Life TimeAvailable Time  LR03 alkaline batteries  For power off Recording Approximately 10hr. * Voice recorder automatically turns off if no button is Speaker playback(VOL:5)                 Approximately 8hr.   pressed .* Press MODE button once and then  PLAY button    to Power off by manual.2. To check the remaining battery power ,    press the PLAY button or REC button -4-  Battery Cover pictureBattery •• ••
Recording Recording by a built-in microphone 1 .Press the PLAY button to power on Voice recorder2. If press the REC button ,the red Led indicator turns on and recording starts.    When recording starts ,Recording number ,volume level ,time are displayed on LCD.3. To stop recording ,press REC button .4. Voice recorder turns off automatically ,if there is no other key input within 1 minute    after stop recording. 5. If recording time exceed the maximum time or messages goes over 99messages per folder,    recording doesn't go on.Recording by a external microphone Connect external microphone to line-in jack and follow the same procedure of above built-in microphone recording.Increasing the recording number during recordingIf  FF button is pressed during the recording , the recording number will be increased one by one from current number. The recording number do not exceed 99 . - 5 -Pause function Press MODE button during recording .To restart the recording press MODE button again.   •• •••••• STOP ••
Playback Playback1.Press PLAY button to power on Voice recorder2. Press PLAY button once again to playback .When Playback starts ,    recording number ,volume level and playback time  are displayed on LCD.3. To stop Playback press PLAY button .4. If there is no key input within 1 minute after stop Playback ,voice recorder will turn off automatically.Volume adjustment 1.You can adjust volume level by UP /DOWN button in stand-by  mode.2. During Playback you can adjust volume level by UP/DOWN buttons.Fast Forward and Rewind During Playback  If you press the FF/ REW button shortly  during playback ,message will be fast forwarded or reversed 5 seconds.  If you press the FF/ REW button long enough  ,message will be fast forwarded or reversed in proportion to   the pressing time of button.Searching the Recording Number  If you press FF/REW button  shortly in stand-by mode ,the recording number will be increased or decreased one by one If you press FF/REW button  long enough  ,the recording number will be increased or decreased fast.  -6 -Playback Pause  PLAY ••. PAUSE ••.
 If you press MODE button during playback ,voice recorder enter into  playback pause mode.. To restart playback  ,press MODE button again.Auto Scanning Playback If you press the PLAY button long enough in stand-by mode ,all message will  playback for 5 seconds from the current message.Loop function If you press UP button long enough in stand-by mode , current message will  playback over again. - 7 -Menu Mode explanation P USE ••.SCAN ••.LOOP ••
* Press MODE button to enter Menu mode. * You can select folder in Menu mode.* To exit Menu mode ,press MODE button again.Folder Selection 1. You can select A,B,C,D folder by UP/DOWN button in Menu mode.       Remaining recording time of selected folder is displayed on LCD.2. Press  FF button for next menu.Message Selection 1.  If press FF button 1 time at Menu mode ,  message number  blinks.       Press UP/DOWN button to select message number.      Recording time of selected message is displayed on LCD. 2.  Press FF button for next menu or REW button for returning  to  previous menu.  - 8 -Erasing one message Folder •••  ••.•• ••• ••
1. Press FF button 2 times in Menu mode .     'Erase' appears and the message number blinks on LCD.2. Select message number by UP/DOWN button 3. Press PLAY button to erase the selected message.4. Press FF button for next menu or REW button for returning  to  previous menu. Erasing a folder 1. Press FF button 3 times in Menu mode     "Erase" appears and a folder blinks on LCD2. Select folder by UP/DOWN button3. Press PLAY button to erase all  message of the  selected folder 4. Press FF button for next menu or REW button for returning  to  previous menu.  - 9 -Erasing all 1 •• ••• ••.••• ••• ••.
1. Press FF button 4 times in Menu mode.      'ABCD' folder will blink on LCD.2. Press PLAY button to erase all message of the 4 folders.3.  Press FF button for next menu or REW button for returning  to  previous menu. Recording Mode selection 1. Press FF button 5 times in Menu mode.     'SP ' or ' LP' recording mode will blink on LCD.2. Select SP or LP recording mode by UP/DOWN button.     3.  Press FF button for next menu or REW button for returning  to  previous menu.  - 10 -VOR(Voice Operating Record) Mode ABCD •• •••••SP/LP •• ••.
1. Press FF button 6 times in Menu mode.    the speaker icon '        ' blinks.2. You can select ON or OFF of VOR mode pressing     the UP/DOWN button.3.  Press FF button for next menu or REW button for returning  to  previous menu. * If no voice input during 5 minutes in VOR ON mode ,automatically change to   stand-by mode.Hold Mode 1. Press FF button 7 times in Menu mode.    'HOLD' blinks on LCD.2. You can select ON or OFF of Hold mode pressing UP/DOWN button.3.  Press FF button for next menu or REW button for returning  to  previous menu. Play Mode 1. Press FF button 8 times , 'ALL/ONE' appear on LCD.    You can select ALL or ONE  pressing UP/DOWN button.    'ALL' mode playback message from current one to the last message of folder.  - 11-    ' ONE ' mode playback current displayed message.2. Press REW button for previous menu. Connecting external equipments ••• ••• ••HOLD ••• •• ALL/ONE ••
External Mic. Recording messages from external equipments.Connect between earphone jack of external equipment(EX.AUDIO,CD PLAYER) and MIC. Jack of the voice recorder with external cablelike attached figure.You can record using external microphone to get better sound quality when the microphone is closer to soundsources.*At this time, built-in microphone will not operate .EarphoneIf you want to use earphone , connect the earphone to earphone jack of voice recorder.* At this time ,built-in speaker will not operate. -12 -Recording messages from Voice recorder to external equipments.Connect between earphone jack of the voice recorder and MIC jack or external in-put jack of external equipment with cable   External Mic , recorder ••. AUDIO , CABLE ,Voice Recorder •••.
like attached figure.Press the PLAY button of the voice recorder and REC button of an external equipment.* If you need ,adjust the volume of the Voice recorder.Recording call conversation Recording from normal phone 1. Connect with external cable ,between the MIC JACK of    Voice recorder and the OUT JACK of the adapter for phone recording.2. Connect the phone to adapter with 30cm line cord. - 13 -3. Connect the telephone line to another jack of the adapterPrecautionRead the following carefully before using the Voice recorder.   AUDIO , CABLE ,Voice Recorder •••. Phone and Voice Recorder •••
Operation1. Do not use or place the product in following conditions  * At a high temperature (above 60• C)  * Inside the car with all windows closed (in summer)  * At a high humid place like bathroom.  * At a dusty place2. Avoid violent vibration or mechanical shock.3. Do not drop the product . It could cause damage.4. Do not apply excessive force to the LCD window . It could cause damage.5. Magnetic cards like credit cards or subway passcard may not operate normally once it is placed near the speaker.6. Do not use it while driving a car or working .It may cause accident.    Do not use in airplanes or areas restricting  the use of electronic devices.* Our company exclude all liabilities for any loss or damage from the use of Voice recorder.* Our company does not take any responsibility for lost messages by reasons of breakdown ,repair ,and others.- 14 -Trouble shooting If any problem happens check for the following items first
Trouble CheckLCD has no display  Have the batteries depleted?  *Replace with new batteriesAre the batteries inserted * Match "+" ." - "ends of the batteries withcorrectly ? the diagram inside the battery compartment.Recording does Is the HOLD mode activated?  * Release the HOLD modenot work. Are the 99 messages recorded * Erase unnecessary messages.already?Have the batteries depleted ?  * Replace with new batteries.Playback does not Is the HOLD mode activated? *Release the HOLD modework No messages recorded in the voice * Check for the recordingrecorder? Is any message recorded?    number.Have the batteries depleted ?  * Replace with new batteries.No sound output Is the volume controller set to '0' ? * Adjust the VOLUME controller.Is the earphone plugged?  * Unplug the earphone -15 -SpecificationsSpecifications are subject to change without notice to improve the quality Model name  DIR -908S
Available recording Time  SP : 240min / LP : 540 min Maximum No. of recording   99 messages each folder(Total : 396 messages)Recording Device  Built-in 16MB Flash memory Microphone  Built-in omni directional condenser microphone(mono)Input  Built-in microphoneOutput  External earphone /built-in speakerSpeaker  Built-in speaker (16 Ohm)Operation  Temperature 0• C ~ 40• CFrequency range   400Hz ~ 3600 HzMaximum Output  80mWat ( 16Ohm built-in speaker) Battery life  About 10hr. during recording  , About 8hr .during speaker playback.Power requirements  DC 3V ,two "AAA" size alkaline batteries.Dimensions  25mm * 129* 18mmWeight   35g(without batteries)Accessories   Earphone ,Battery ,External microphone ,External connecting cable ,Manual - 16 -Warranty  Product    DIGITAL RECORDER     Model                DIR- 908S
Assurance period    1 YEAR    Item  Sales date             yy       mm    ddCustomer tel sincerelySales agency   telsincerely  FCC NOTICE        NOTE:   This equipment has been tested and found to  comply  with         the  limits for a Class B digital device, pursuant to Part 15  of   -17 -        the  FCC Rules.  These limits are designed to provide  reasonable         protection against harmful interference in a residential  instal-        lation.   This  equipment generates, uses and can  radiate  radio         frequency  energy  and, if not installed and used  in  accordance         with  the instructions, may cause harmful interference  to  radio         communications.  However, there is no guarantee that interference         will  not occur in a particular installation.  If this  equipment         does cause harmful interference to radio or television reception,         which can be determined by turning the equipment off and on,  the         user  is encouraged to try to correct the interference by one  or
        more of the following measures:        -Reorient or relocate the receiving antenna.                -Increase the separation between the equipment and receiver.                -Connect the equipment into an outlet on a circuit different from         that to which the receiver is connected.                -Consult  the  dealer or an experienced radio/TV  technician  for         help.                        NOTE:  The  manufacturer is not responsible for any radio  or  TV         interference caused by unauthorized modifications to this  equip-        ment.  Such  modifications  could void the  user's  authority  to         operate the equipment.

Navigation menu