Digital Device LD-3270T Digital Device User Manual

Digital Device Inc. Digital Device

User manual

Please read this manual carefully before using your TFT LCD and keep the manual handy for future reference.CAUTIONRISK OF ELECTRICALSHOCK, DO NOT OPENTO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.WarningTO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.ALSO DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS,UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.Warning:Still image (immovable) screen may cause permanent damage to LCD.1) Lengthy displayed still images from Video games, banners, graphics and others may fatally damage the screen.2) When using the LCD in 4:3 formats with sidebars for a long period of time, it may cause damage to the TFT LCDpanel. It is recommended that you use 16:9 or other formats.(Image Sticking can be avoided by using "Panel"function of the Setting's sub menu. However, once image sticking occurs, it may not disappear completely.An image will be dimmed as the image is displayed long time or repeatedly)Any damage to the LCD caused by improper usage (such as image sticking) shall not be covered by the warranty.The lightning flash with the arrowhead symbol, within an equilateraltriangle, is intended to alert the user to the presence of uninsulated"dangerous voltage" within the product's enclosure that may be ofsufficient magnitude to constitute an electric shock to persons.The exclamation point within an equilateral triangle is intended toalert the user to the presence of important operating andmaintenance (servicing) instructions in the literature accompanyingthe appliance.WARNING
SAFTY INSTRUCTIONSSAFTY INSTRUCTIONSImportant safeguard for you and your new productYour product has been manufactured and tested with your safety in mind. However,improper use can result in potential electrical shock or fire hazards. To avoid defeatingthe safeguards that have been built into your new product, please read and observe thefollowing safety points when installing and using your new product, and save them forfuture reference.Observing the simple precautions discussed in this booklet can help you get many yearsof enjoyment and safe operation that are built into your new product.1. Read InstructionsAll the safety and operating instructionsshould be read before the product isoperated.2. Follow InstructionsAll operating and use instructions should befollowed.3. Retain InstructionsThe safety and operating instructions shouldbe retained for future reference.4. Heed WarningsAll warnings on the product and in theoperating instructions should be adhered to.5. Water and MoistureDo not use this product near water, forexample, near a bath tub, wash bowl,kitchen sink, or laundry tub, in a wetbasement, or near a swimming pool.6. Accessories, Carts, and StandsDo not place this product on a slippery ortilted surface, or on an unstable cart, stand,tripod,bracket,ortable.The product may slide or fall, causingserious injury to a child or adult, and seriousdamage to the product.Use only with a cart, stand, tripod,bracket, or table recommended by themanufacturer, or sold with the product.Any mounting of the product should followthe manufacturer's instructions, and shoulduse a mounting accessory recommended bythe manufacturer.7. Transporting ProductA product and cart combinationshould be moved with care.Quick stops, excessiveforce, and uneven surfacesmay cause the productand cart combination to overturn.8. AttachmentsDo not use attachments not recommended bythe product manufacturer as they maycause hazards.9. VentilationSlots and openings in the cabinet are providedfor ventilation and to ensure reliable operationof the product and to protect it fromoverheating, and these openings must not beblocked or covered.The openings should never be blocked byplacing the product on a bed, sofa, rug, orother similar surface. This product should notbe placed in a built-in installation such as abookcase or rack unless proper ventilation isprovided or the manufacturer's instructionshave been adhered to.10. Power SourcesThis product should be operated only from thetype of power source indicated on themarking label. If you are not sure of the typeof power supply to your home, consult yourproduct dealer or local power company.For products intended to operate from batterypower, or other sources, refer to theoperating instructions.PORTABLE CART WARNING
< Safety Instructions continued >11. Outdoor Antenna GroundingIf an outside antenna or cable system isconnected to the product, be sure theantenna or cable system is grounded so asto provide some protection against voltagesurges and built-up static charges.12. LightningFor added protection for this product(receiver) during a lightning storm, or whenit is left unattended and unused for longperiods of time, unplug it from the walloutlet and disconnect the antenna or cablesystem.This will prevent damage to the product dueto lightning and power-line surges.13. Power LinesAn outside antenna system should not belocated in the vicinity of overhead powerlines or other electric light or power circuits,or where it can fall into such power lines orcircuits. When installing an outside antennasystem, extreme care should be taken tokeep from touching such power lines orcircuits as contact with them might be fatal.14. OverloadingDo not overload wall outlets and extensioncordsas this can result in a risk of fire orelectric shock.14. HeatThe product should be situated away from heatsources such as radiators, heat registers, stoves,or other products (including amplifiers) thatproduce heat.15. CleaningUnplug this product from the wall outlet beforecleaning. Do not use liquid cleaners or aerosolcleaners. Use a dry cloth for cleaning.16. ServicingDo not attempt to service this product yourselfas opening or removing covers may expose youto dangerous voltage or other hazards.Refer all servicing to qualified service personnel.17. Damage Requiring ServiceUnplug this product from the wall outlet and referservicing to qualified service personnel under thefollowing conditions:Example of antenna groundingAs per national electrical codeAntenna lead in wireAntenna dischargeunitGrounding conductorsGround clampsPower servicegroundingElectrode systemElectric serviceequipmentGround clamp- When the power-supply cord or plug isdamaged.- If liquid has been spilled, or objects have falleninto the product.- If the product has been exposed to rain orwater.- If the product does not operate normally byfollowing the operating instructions. Adjust onlythose controls that are covered by the operatinginstructions as an improper adjustment of othercontrols may result in damage and will oftenrequire extensive work by a qualified technicianto restore the product to its normal operation.- If the product has been dropped or the cabinethas been damaged in any way.- When the product exhibits a distinct change inperformance.
Contents4Manual ContentsFeatures and Package ContentsI/O DefinitionsRemote ControlBasic OperationScreen LayoutPictureScreen setAudioOptionsTV / SETTroubleshooting- Features- Packages Contents- Front Panel Control- Rear Cabinet I/O's- Remote Control Basic (1)- Remote Control Basic (2)- AV Input / Output Terminal-TV- Cable TV/External Speaker- Video (Composite)-S-VHS- SCART Video and SCART connection (PAL only)- VIDEO Output connection (NTSC only)- HDTV/DVD component video- Analog RGB / DVI- Screen Layout Menu Setting- Watching Picture in Picture- Picture Adjustment Mode- Screen Setting- Audio Mode Setting- Closed Caption Setting (NTSC only)- Option Setting (PAL only)- Teletext- Displaying the Teletext Informations- Selecting Display Option- Source Select (NTSC only)- Source Select (PAL only)- TV Tuning (PAL only)- TV CH Edit (PAL only)-Tuning(NTSConly)-CHEdit(NTSConly)- Password (NTSC only)- Movie blocking (NTSC only)- TV blocking (NTSC only)040505060607080909101111121213131415161718192021222324252627282930313233
Features and Package- Menu driven On Screen Display(OSD) for Brightness and Contrast, Sharpness, Hue andSaturation, NTSC / PAL, Channel, PIP(Picture in Picture), Aspect Ratio, Input Source,Audio, Audio Adjust, Language, Functions.- Cable TV ready (NTSC system)- IR Remote control for all functions- Built-in Television Tuner(option)- Zoom-in (up to 500%)- Speaker output : 2channel- Left, Right(Built-in speaker-26inch only/External speaker-30/32inch)- Selectable Aspect Ratio (16:9, 4:3, wide, Zoom1, Zoom2)- PIP(Picture in Picture), Twin Screen, POP3, POP12, Grid- Multiple Mounting Options : Wall mounting or Stand- Monitor Composite Video Output- Large Viewing Angle (170˚)- Input Video sources : 1 RGB (Analog RGB)1 DVI (Digital RGB)1 RS-232C(SoftWare Upgrade)1CompositeVideoInputs(or1compositeA/V&1ScartInput)1 Composite Video Outputs (or 1 composite A/V & 1 Scart Output)1 S-VHS Input1 DVD/DTV/HD Component Video Input1 RF(Tuner TV)- LCD TV set- User's Manual- IR Remote control unit- 2 "AAA " size batteries-AVcable-ACpowercordFeaturesPackage Contents5
I/O DefinitionsFront Panel Controls6▲󰚟󰚟󰚟󰚟󰚟󰚟󰚟V O L 󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟▼󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟▲ 󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟C H 󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟▼ POW ERMENU SEL▲󰚟󰚟󰚟󰚟󰚟󰚟󰚟V O L 󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟▼ 󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟▲󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟C H 󰚟󰚟󰚟󰚟󰚟󰚟󰚟󰚟▼ P OW ERMENU SELON/OFFON/OFF①Main Power ON/OFF: Press to turn on(Standby Mode) and off.②Standby Power ON: Touch to turn on(Operation Mode) and off.③Channel UP/DOWN: Touch to change the channel at TV mode.④Volume UP/DOWN: Touch to increase and decrease the volume.⑤SEL : Touch to select all available Menu.⑥MENU : Touch to Menu⑦IR Receiver⑧Power Indicator : Red color (Standby mode),Green color (Operation mode)POW ERMENUSELVOL+VOL-CH+CH-POW ER26inch30inch- AC POWER Input- RF(TV) connector for antenna Input- Monitor Composite Video Output- Monitor Line Level Audio Output- S-VHS Input- S-VHS Line Level Audio Input- Composite Video Input- Composite Line Level Audio Input- SCART Input/Output- HDTV/DVD Component Video Input- HDTV/DVD Line Level Audio Input- RGB D-sub connector Input- RGB Audio Input- DVI(digital RGB) Input- IR Remote Control- Speaker Output : Left, RightBuilt-in Speaker(26inch only:option)- RS-232(SoftWare Upgrade)Rear cabinet I/O's̺̼̻̿̾̽̀̺́̿̾ ̽ ̼̻̀́
Basic Operation926"30"/32"PALNTSC2. TVCoaxial CableANT INPUTྙConnect as the drawing shown.ྚPower on.ྛPress the [TV] button.DVI RS-232C RGB AC POWERLRAC POWER SPEAKER DVI RS-232C RGBANT INPUT DVD/HD INPUT S-VHS INPUT COMPOSITE INPUT SCARTPC(S) L R Pr Pb Y L R S-VHS L R VIDEOANT INPUT DVD/HD INPUT S-VHS INPUT COMPOSITE INPUT COMPOSITE OUTPUTPC(S) L R Pr Pb Y L R S-VHS L R VIDEO VIDEO L R1. AV Input/Output Terminal[Note]In a poor signal area, purchase and install a signal amplifier for better quality.
Basic Operation103. TV with Cable TV Settop BoxConnection 1ྙSelect 3 or 4 with channel switch on cable box.ྚGTune the TV channel to the same selected output channel of cable box.ྛSelect channels at the cable box or with the cable box remote control INPUT.Connection 2ྙConnect the audio and video cables from the cable box's output jacks to the TV input jacks, as shown in the figure.ྚPress the Video 1 or 2ྛSelect channels with the cable box remote control.ྙConnect as the drawing shown.ྚPower on.4. External Speaker[Note] 26inch:5W x 5W, 8Ω30inch:10W x 10W, 8ΩSPEAKER
Basic Operation11CompositeRLV VL RCOMPOSITE VIDEO OUTVCR5. VIDEO(Composite)ྙConnect as the drawing shown.ྚPower on.ྛPress the [VIDEO1/ 2] button.( [VIDEO2] button for PAL System )S-VHS S-VHS OUTPUTVCRS-VHS CableAUDIO CableVIDEO1 (MONO)LR LR6. S-VHSྙConnect as the drawing shown.ྚPower on.ྛPress the [S-VHS] button.
Basic Operation12VCRSCART I/OSCART I/OSCART CableVIDEO 1RLV VL RCOMPOSITE VIDEO OUTVIDEO8. VIDEO Output connection(NTSC only)ྙConnect as the drawing shown.ྚPower on.7. SCART Video and SCART RGB connection(PAL only)ྙConnect as the drawing shown.ྚPower on.ྛPress the [VIDEO1] button.
Basic Operation13TV/HD/DVD(P)Pr Pb Y Pr Pb YCOMPOSITE VIDEO OUTSettop Box, Progressive DVDCOMPOSITE VIDEO OUTDVD PlayerRL RLAUDIO CableCOMPONENT VIDEO CableDTV/HD(S) SOUND OUTRGB(P)DVI(P)RGB(P)DVI(P)COMPUTER9. HDTV/DVD component video(Progressive DVD, DTV 480p to 1080i)DVD component video(Interlaced DVD)ྙConnect as the drawing shown.ྚPower on.ྛPress the [COMPONENT1]/[COMPONENT2] button.ྙConnect as the drawing shown.ྚPower on.ྛPress the [Analog RGB] button for Analog RGB.ྜPress the [Digital RGB] button for Digital RGB (DVI-D).10. Analog RGB/DVI(option)
%DVLF2SHUDWLRQ////////////////////5HVROXWLRQ3L[HO//////////////////////NEGPOSPOSNEGNEGNEGNEGPOSPOSPOSPOSPOSPOSNEGNEGPOSPOSPOSPOSPOSPOSPOS3TANDARD3TANDARD3TANDARD)NDSTANDARD3TANDARD3TANDARD3TANDARD'UIDELINE'UIDELINE3TANDARD3TANDARD3TANDARD3TANDARD'UIDELINE3TANDARD3TANDARD3TANDARD3TANDARD3TANDARD3TANDARD3TANDARD3TANDARDPOSNEGNEGNEGNEGNEGNEGPOSPOSPOSPOSPOSPOSNEGNEGPOSPOSPOSPOSPOSPOSPOSDqdorj5*%k5*%9HUW5HIUHVK+]+)UHT.+]+6\QF3RODQLW\+6\QF3RODQLW\ &RPPHQW5*%3'9,35*%3'9,3&20387(5ྙ&RQQHFWDVWKHGUDZLQJVKRZQྚ3RZHURQྛ3UHVVWKH>$QDORJ5*%@EXWWRQIRU$QDORJ5*%ྜ3UHVVWKH>'LJLWDO5*%@EXWWRQIRU'LJLWDO5*%'9,'$QDORJ5*%'9,RSWLRQ
Teletext (PAL Only)Teletext FeatureMost television channels provide written information services via teletext. Information provided includes:---> Television programme times---> News bulletins and weather forecasts---> Sports results---> Travel informationThis information is divided into numbered pages (see diagram).Teletext information is often divided between several pages displayed in sequence, which can beaccessed by:---> Entering the page number---> Selecting a title in a list---> Selecting a coloured heading(FASTEXT system)You can display Teletext information at any time on your television. For Teletext information to bedisplayed correctly, channel reception must be stable; otherwise:---> Information may be missing---> Some pages may not be displayed.Part ContentA Selected page number.B Broadcasting channel identity.C Current page number or search indications.D Date and time.EText.F Status information./ FASTEXT information.Options21
Displaying the Teletext InformationྙPress the [ ] button to enter the Teletext mode.ྚTo exit from the Teletext display, Press the [ ] button again.Selecting a Text PagesྙUsing the Number Buttons.Enter the three-digit page number given in the content by pressing the corresponding Number buttons.: The selected Page number appears at the top of the screen and page appears after a short time.ྚFASTTEXT SystemIf the FASTEXT system is used by the broadcasting company, the different topics coveredon a Teletext page are color-coded and can be selected by pressing the coloured buttonson the remote control.Press the coloured button corresponding to the topic that you wish to select; the available topicsare given on the status line.ྛDisplay the Previous or Next page.ྜSub-page can scrolled by using the [ ]/[ ] buttons.ྜྷTo exit from the Teletext display, Press the [ ] button.11?i3,36:$3326,7,216,=(7:,13,&6&5((1=22067,//7(;73,&785(6281'67(5(2$'''(//$1*790(180(181122Options
COMPONENT 1[HD/DVD]Video 2[Composite]S-VHSVideo 2[Composite]S-VHS25
Trouble shooting33Symptom Cause Possible solutionThe power does not turn on. Power to the TV is not plugged in. Check source of power to the TV.The remote control doesnot work.Sensor is blocked.Batteries in remote controlare weak.Clear path for sensors.Clean sensor lens.Replace batteries.No signal is displayed. Video source incorrect.Check video source connection.Make sure TV is set to correct videosource.Picture scrolls or is fuzzy. Antenna type or location. Change antenna.Try antenna in different location.Picture appearsbutNosound.Part of picture is cut offor picture is not centered.Picture is too largeor too small.The brightness is reducedgradually.Volume set at the minimum.Speakers aren't connected.Audio input set incorrectly.Improper position setting.The signal is unstable.Improper the screen size setting.Fixed patterns are displayedfor a long time.Increase the volume.Connect the speakers properly.Check audio input connection.Adjust the position properly.When RGB, DTV/HD mode,Set to the proper resolution andAdjust the Freq. and phase setting.Adjust the screen size setting.Image sticking minimization mode.
FCC Compliance Statements Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: x Reorient or relocate the receiving antenna x Increase the separation between the equipment and receiver. x Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. x Consult the dealer or an experienced radio / TV technician for help. Warning : Your are cautioned that any change or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate such equipment. G

Navigation menu