Digital Device LD-3280B 32 Inch LCD TV User Manual ATSC 218 Manual MA B ENAT2

Download:
Mirror Download [FCC.gov]
Document ID	628070
Application ID	ylSbL3ewoqeBgyhMd4QZHg==
Document Description	Users Manual Part 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	250.48kB (3130995 bits)
Date Submitted	2006-02-13 00:00:00
Date Available	2006-02-13 00:00:00
Creation Date	2006-02-13 14:44:32
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2006-02-13 14:44:41
Document Title	ATSC 218 Manual(MA-B---ENAT2).pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	yhyoon

Additional Function
Setting the Sleep Timer
You can adjust the time for automatic system down.
Press [SLEEP] button.
OFF >30Min >60Min >90Min >120Min >150Min >
180Min
To set the sleep timer in [Setup] menu.
1. Press MENU [.] button on the remote control.
2. Select Setup [Q menu by pressing Channel
[ - / . ] button.
3. Press Volume [ 5 ] button, select ‘Time' With
Channel [ - / n] button and press Volume
[ - ] button again
4. Select [Sleep Timer] by pressing Channel
[1 / - ] button.
5. Set the timer with Volume [ - / - ] button
6. When configuration is done, press MENU [.]
button to save the changes and exit.
Sleep Timer is changed as you press [Sleep] button.
Tip
Time “is automatically set, once you set the Time Zone and then watch a DTV channel.
After Time is set, you can use On Timer and off Timer functions.
29
Additional Function
PIXEL SHIFT
Due to its fundamental and built-up technology of the panel, when it is turned on long time of period
especially with a still image, it can have afterimage that does not disappear even though it is turned off.
During watching TV, this can affect serious image quality problem. However, with this feature, each pixel
of panel is shifted to right or left minutely and regularly, surely impoSSible to be noticed by human eyes,
to protect afterimage effect.
Digital Noise Reduction
1.
2.
Press MENU [Q] on the remote control.
[ 4 / ' ] button.
. When configuration is done, press MENU [.]
button to save the changes and exit.
Set ‘Pixel shift' function ‘On' by pressing
Volume [ - /
~ ] button.
Select Setup [N] menu by pressing Channel
Press Volume[ ~ ] button, select ‘Pixel Shift' by
pressing Channel [ 4 / ' J button.
When the incoming signal is weak or picture noise appears at moving image, DNR function helps to
reduce the noise and eye strain by its filtering procedure.
WIPER
. Press MENU [.] on the remote control.
. Select Setup [Q menu by pressing Channel
[ 4 / ' ] button.
. Press Volume[ ~ ] button, select‘DNR' by
pressing Channel [ 4 / . ] button.
[7~ / . ] button.
. When configuration is done, press MENU [Q]
button to save the changes and exit.
Set ‘Pixel Shift' function ‘On' by pressing Volume
Wiper function is for removing afterimage and noise, Moving wiper(white vertical bar) will remove noise
on display after several minutes.
1. Press MENU [Q] on the remote control.
2. Select ‘WIPER' in Setup [‘] menu.
3. Set ‘WIPER' function ‘On' by pressing
Volume [ -
/ - ] button.
30
Additional Function
PIP (Picture In Picture)
PIP is the function to display two different input source simultaneously.
been?
To set P1P in On Screen Display Menu,
. Press [PIP] on the remote control.
[PIP] is changed as following every time you
press [PIP] button.
On -> Off
. Press MENU [Q] button on the remote control.
. Select PIP [H1] menu by pressing Channel
[ ~ / ~ ] button.
. Press Volume [ - ] button and select [PIP] by
pressing Channel[ - / ‘ ] button.
. Set PIP to “On" with Volume [ ~ / - ] button.
. when configuration is done, press MENU [Q]
button to save the changes and exit.
* Please check the following PIP combination table of Main and Sub picture.
(‘Grabhlc-ln-Grabhlc or Vldeo-m-Vldeo' ls not supported.)
mm SUB TV AV! s-vmeo sz D-TV Compomm1 Componem2 PC HDMI
W X X X X G 0 O 0
AV! X X X 0 O 0 O O
S-VIDEO X X X 0 U 0 G 0
AV] X X X X X X X X
D-TV X 0 O X X X X X
Dumps-men” o o o x x x x x
Componentz 0 O O X X X X X
*Video: TV, SCART Pc 0 o 0 X x X X X
*Graph|c: Component,
Analog RGB, HDMI noun 0 o o x x x x x
31
Additional Function
Adjusting the Size of Sub picture
Press [F.SIZE] button on the remote control.
The size is changed in the followmg order each
press.
‘Small r DOUBLE r DOUBLEZ'.
. Press MENU [.] button on the remote control.
. Select PIP [flj menu by pressing cnanne|
[4 / r ] button.
. Press Volume [ - ] button and select [Size] by
pressing Channel [ 4 / ' ] button.
. Press Volume [ 7~ / 5] button to adjust the
size.
5. when configuration is done, press MENU [Q]
button to save the changes and exit.
Changing Input mode of Sub picture
You can change the input source of sub picture.
Press [P.1NPUT] button on the remote control.
The input source is changed as you press the
button.
32
Additional Function
To change the input source in On Screen Display Menu.
1. Press MENU [.] button on the remote control.
2. Select PIP [ ] menu by pressing Channel
[‘~ / - ]button.
3. Press Volume [ - ] button and select [Input
Source] by pressing Channel [ r / > ] button
and Volume [ 5] button again.
4. Press volume[ - / - ] button to change input
source.
(To ad]ust the input source of Sub picture, PIP
should be active.)
5. When configuration is done, press MENU [Q]
button to save the changes and exit.
Adjusting the posi ion of Sub picture
You can change the position to ‘Up’, ‘Down', ‘Left', ‘Right'.
The position of Sub picture is changed as you
press [RPOSITION] button on the remote control.
To adjust the position in On Screen Display Menu.
1. Press MENU [.] button on the remote control.
2. Select PIP [I] by pressing Channel [ r / > ]
button.
3. Press Volume button. [ ~ ]
4. Select [Position] by pressing Channel [ 4 / . ]
button and Volume [ . ] button again.
4. not;
5. Adjust the position by pressing Volume [; / ,]
button
(To adjust the position of Sub picture, PIP
should be active.)
5. When configuration is done, press MENU [Q]
button to save the changes and exit.
—
33
Additional Function
Swapping the main with sub picture in PIP mode
Press [F.SWAP] button on the remote control.
1. Press MENU [.] button on the remote control.
2. Select PIP [m] by pressmg Channel [ - / ' ]
button.
lllflll l- .
3. Press Volume button. [ r ].
4. Select [SWAP] by pressing Channel [ - / - ]
button.
0 a, EN
5. Pressing Volume [ - ] button to swap the
picture
5. When conflguratlon ls done, press MENU [Q]
button to save the changes and exit.
Viewing Closed Caption
Closed Caption feature is to display On Screen Text Messages during watching TV. This feature is
available in both analog and digital broadcast.
1. Press MENU [.] on the remote control, select
Setup [a] menu by manlpulatlng Channel
[ - / ' ] button and press volume[ - ] button.
2. Press Channel [ . / . J to select [Caption]
and then Volume [ - 1 button.
3. ‘Caption' sub menu will appear.
*v Sub Menus of Caption.
Caption: Turn the feature on or off. This can be set by Volum8[ ' / ' 1 button.
Caption Boa: Get the Text Bax. You can turn it on or off with Volume [ 4 / ~ ] button.
Caption Box Color: change the color of Caption Box. Press Volume [ . / . ] button to change it.
—
34
Additional Function
Parental Rating Control (V-Chip)
v-chip feature automatlcally locks TV Programs (TV Parent Gulde Llrles) or Movle (MPAA) that IS consld-
ered as inappropriate for children. To activate, deactivate or set the rating, you should enter a PIN
(Personal ID Number).
1. Press [MENU] button to display the menu.
2. Press Channel [‘~ / - ] button to select ‘Setup',
and then press volume [ 7. / J]
3. Press Channel [ r / - ] button to select
‘V-Chip’, and then press Volume [ ./ . ] button.
4. The message “Enter PIN" will be appear. Enter
your four digits PIN Number and press ok[ @]
button The V-Chip screen will appear.
(*The default Pln Number of a new TV set ls ‘0000’.)
*To change PIN Number, select Change Pln Number menu and then the menu will appear. Choose and
enter 4 dlglts.
How to set up restri tions using the “V-Chip"
1. Press Volume [ - ] button to set V—Chip mode.
2. Press Channel [ - / - ] button to select ‘TV Parent Gulde Lines' and then push Volume [ - / - ]
button. The menu Wlll appear. You can set up the restrlctlons ln thls menu.
*Restriction Categories based on six aged base.
TV—Y Young Children
TV-Y7 Chlldren 7 and over
TV-G General Audlerlce
Tv—PG Parental Guidance
TV—14 Vlewers 14 and Over
TV-MA Mature Audlence
For instances, if you block TV—Y, TV—Y7 Wlll automatically be blocked and similarly, if you block the
TV—G, all the categories ln “young adult" (TV—Y, TV—Y7, TV—G, TV—PG, TV—14, and TV—MA) will be
blocked.
*Each Restriction Category has additional options, sub—ratings.
Fv: Fantasy Vlolence
V: Vlolence
L: Adult Language
5: Sexual Situation
D: Sexually Suggestive Dialog
V-Chlp wl|| automatlcally block Certalrl sub-categorles that are more restrlctlve. For example, lf you
block “L" sub—rating in TV—PG, then the “L” sub ratings in TV—14 and TV—MA will automatically be
blocked.
How to set up restri tions using the “MPAA".
1. Press Volume [ ~ ] button to set V—Chip mode.
2. Press Channel [ - / - ] button to select ‘MPAA Rating” and then push Volume [ -/ . ] button.
The menu Wlll appear. You can set up the MPAA restrlctlons ln thls menu.
*Restrlctlon Categorles based on slx aged base.
G General Audience (No Restrictions)
PG Parental Guidance Suggested
PG-l3 PG-13 (Parents Strongly Cautloned)
R R (Restrlcted. Chlldren under 17 should be accompanled by an adult)
NC—17 No Children under age 17.
X X (Adults Only)
NR Not Rated
—
35
Adjusting PC Picture Settings
Using as a PC Monitor
This TV is designed to be used as a PC Monitor. Concerning the Maximum Resolution, please refer
to specification table in Appendix. Since it has driver software implemented, you don’t have to
install any additional software. Just PLUG N’ PLAY!!!
Tip
To use it as a PC Monitor, your PC and TV should be connected via D—Sub Cable (15 Pin Analog)
or DVI—to—HDMI cable. For details, please check tiie Installation section.
Check the current Resolution and Frequency rate
This displays information on current resolution and frequency rate on the bottom of the screen.
1. Press MENU [a] button on the remote control.
2. Press Channel [y / button to select‘[Picture]'
[-] menu and push olume [ i] button.
3. In [Picture] menu, select [\l/>c] with Channel
[9 / 1] button and push olume[ . ] button.
4. The resolution and Frequency rate are displayed
on the bottom of the screen.
Automatic Adjustment of the PC picture
This IS the function that the TV System finds the optimal value for adjustment and automatically applies
it. Use this function when the position of WINDOWS image is not centered or the characters on the
screen are not clear.
Press MENU [@] button on the remote control.
Press Channel[ - / n] button to select‘[Picture]' [m] menu and push Volume [ - ] button.
In [Picture] menu, select [PC] with Channel [ - / ' i] button and push Volume [ ~‘] button.
Select ‘Auto Adjustment’ by pressing Channel [3 / Vi] button
5"?sz
Press Volume [ N] button and then Automatic adjustment starts. (It takes a little time.)
—
36
Adjusting PC Picture Settings
Setting the Position of PC Picture
You can adjust the position of a PC picture manually. Use this function when the picture is not centered
or shifted to sides.
. Press MENU [@] button on the remote control.
. Press Channel [5 If] button to select ‘[P|cture]’ [ml] menu and push Volume [ 5] button.
. In [Picture] menu, select [PC] with Channel [1 I a] button and push Volume [ -‘] button.
. Press Channel [C- / r ] button and then select‘Position’ by pressing Volume [ {J button.
. The position adjustment screen will be displayed.
0‘U1-thH
. Adjust the position by pressing Channel [3 / 21] button and Volume [; / 5 ] button.
Adjusting the PC Picture Settings
TYou can adjust the PC picture, by selecting the preset values or user value. In this Menu, you can adjust
Brightness, Contrast and Sharpness.
To use the preset values, (High fl Middle fl Low fl Custom)
1. Press MENU [a] button on the remote control.
2. Press Volume [ “] button in Picture [$1] Menu.
3. Select [Picture Mode] by pressing Channel ["- / n]
button and adjust the value With Volume [.-,/ . ]
button. ' '
37
Adjusting PC Picture Settings
Adjusting the Color Tone
You can adjust the color tone of the PC Picture.(Normal fl Warml % WarmZ fl Custom ~> Cool2 fl Cooll)
[vnlurlompemluie
1 _
hi
iiiii. u—-—
rum”
1. Press MENU [a] button on the remote control.
2. Press Channel [ t / » ] button to select ‘[Picture]’ m] menu and push Volume [ 5] button.
3. Select [Color Tone] by pressing Channel [‘~ / n] button and press Volume [ . ] button.
4. [Color Temperature] Menu Will display.
5. Adjust RGB by pressing Channel[ - / - ] button and Volume [ - /- ] button.
Customiging the Color Tone
1. Press MENU [a] button on the remote control.
2. Press Channel [‘~ / - ] button to select ‘[Picture]' [@| menu and push Volume [ ~ ] button.
3. Select [Color Tone] by pressing Channel [ 4 / r ] button and press Volume [ - ] button.
4. [Color Temperature] Menu Wlll display.
5. Select [Custom] by pressing Volume [ - /~ ] button.
6. Select [R], [G], [B] Menu by pressing Channel [‘~ / - ] button.
7. Adjust [R], [G], [B] Menu by pressing Volume [ -/~ ] button.
8. Press MENU [a] button to exit.
38
Adjusting PC Picture Settings
Adjusting the Frequency / Phase
Use this function to adjust the Frequency range or Phase.
To adjust the Frequency by using On Screen Display Menu.
1. Press MENU [a] button on the remote control.
2. Select Picture munu by pressing Channel
['f'/. -j.] button.
3. Press Volume [ 5] button in Picture [-]
Menu and then, select‘PC' menu by
manipuiating Channei ['<"/i 6] button.
4. Press Volume [“;] button.
5. Press Channel [9 4] button to select
[Frequency] or [Phase].
6. Press Volume [f- / gz] button to adjust the
Frequency range or Phase
i-
(Frequency)
MA—B———ENAT1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:bbf1774f-aff0-4317-a127-185955841219
Modify Date                     : 2006:02:13 14:44:41+01:00
Create Date                     : 2006:02:13 14:44:32+01:00
Metadata Date                   : 2006:02:13 14:44:41+01:00
Document ID                     : uuid:ce47e4ce-f0e2-4725-b163-60f1b320c68f
Format                          : application/pdf
Title                           : ATSC 218 Manual(MA-B---ENAT2).pdf
Creator                         : PScript5.dll Version 5.2
Author                          : yhyoon
Producer                        : Acrobat Distiller 7.0 (Windows)

EXIF Metadata provided by EXIF.tools