Digital Device LD-700T 17 inch TFT LCD Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	303517
Application ID	IO6WigFE11/HPAVruU0Zow==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.14kB (264303 bits)
Date Submitted	2003-02-18 00:00:00
Date Available	2003-02-18 00:00:00
Creation Date	2003-02-18 18:48:32
Producing Software	Acrobat PDFWriter 5.0 Windows NT¿ë
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual.doc
Document Creator	User Manual - Microsoft Word
Document Author:	김경용

Appendix 6. User Manual
User Manual
TFT LCD Monitor
LD – 700T
DIGITAL DEVICE
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment dose cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio /television technician for help.
Warning : You are cautioned that any changes or modifications to the equipment
not expressly approved by the party responsible for compliance could void your
authority to operate such equipment.
— NOTE: This unit was tested with shielded interface cables for the connection to the
host PC. The shielded interface cable must be used with the unit to insure compliance
DOC CLASS B NOTICE
This digital apparatus does not exceed Class limits for radio noise emission for a
digital apparatus as set out in the Radio Interference Regulations of the Canadian
Department of Communications.
MAIN FEATURES
Thank you for purchasing our high resolution TFT LCD monitor.
We recommend that you thoroughly read through this user's guide before using the product.
It is also recommended to safely store the guide in times of immediate need in the course of using the
product.
FRONT OF MONITOR
Uesd in turning on/off the screen.
The power light shows regular and safe mode
functions with colors.
Ventilator(Caution!)
Do not block the ventilator
Hole for wall hanging
Detachable Base
Detachable
for other equipments
(VESA ARM) and wall hanging use.
Connector to External Functions
Connects
signals
with
external
equipments and PCs.
FUNCTIONS
Although regular monitors for PCs use CDT as a medium for display, the TFT LCD
Monitor is a Flat Panel Display based on digital technology, and was originally used only
for laptops PCs. Now it is used for desktops and laptops alike, opening a world of
conveniences and quality to those ardent PC users.
The following functions are provided in our products.
1.
Convenient and easy to handle Control Button.
2.
From PC function .
3.
A slim and space reducing monitor
4.
Monitor transferable for wall hanging.
5.
Industrial robot and VESA install able.
6.
Liberal angle control.(+30℃ ~ -5℃)
7.
Low energy consumption
8.
Scarcely influences surrounding objects, with no harmful electronic waves, noise,
heat or magnetic activities.
COMPONENTS
After discarding the package and wrapping of the LCD PC, check for the following
components in the box.
Components
LCD PC, Power Adapter, User’s Guide, Signal Cable, Power Cable,
Battery (AA) 1.5V x 2
PRECAUTIONS IN INSTALLING
Install on safe ground, : There ’s possibility of damage of the product or harming
people.
Always cover the product or keep in a well ventilated place. : There is danger of fire
and also for safe maintenance
Do not put anything containing water, medicine, small metal material, or heavy objects
on the product. : Danger of fire, electrocution, and damage
Do not expose the product to direct sun light. : The screen will not maintain clarity
and may cause damage to the eye.
Do not install in damp, dusty, or wet places. : Danger of fire and electrocution.
Do not put candles, cigarettes, or other objects with excessive heat. : Danger of fire.
Do not install any external connections, only connecting cords and adapter included in
the box. : Damage and fire may occur.
CONNECTION TO YOUR PC for 17” Only
1.12V DC Jack
2.PC 15 Pin Jack
PC FUNCTION SETTING
Information
Information of the screen
Menu
→ Information → Select
→ Control with
→ Menu
Yon can see the information of the screen.
Input Source
TV or changing to another mode
Menu
→ Input → Select
→ Control with
→ Menu
Yon can change input mode.
(TV – Composite – S-VHS – Component – PC)
OSD Control
Vertical Position of OSD
Menu
→ OSD Control → H Position → Select
→ Control with
→
→ Control with
→
Menu
Yon can adjust horizontal position of OSD.
Halftone of OSD
Menu
→ OSD Control → Halftone → Select
Menu
Yon can adjust halftone of OSD.
Contrast
To clarify the screen
Menu
→ Picture → Contrast → Select
→ Control with
→ Menu
Yon can control the contrast of the images or letter on the screen.
Brightness
To control brightness of the screen
Menu
→ Picture → Brightness → Select
Yon can control the brightness of the screen.
→ Control with
→ Menu
Adjust
Vertical Position
Menu
→ Adjust → V Position → Select
→ Control with
→ Menu
Yon can adjus t the vertical position of the screen
Horizontal Position
Menu
→ Adjust → H Position → Select
→ Control with
→ Menu
Yon can adjust the horizontal position of the screen
Clock Adjust
Menu
→ Adjust → Clock Adj. → Select
→ Control with
→ Menu
→ Control with
→ Menu
→ Control with
→ Menu
Yon can adjust the clock
Phase Adjust
Menu
→ Adjust → Phase Adj. → Select
Yon can adjust the phase.
Auto Adjust
Menu
→ Adjust → Phase Adj. → Select
Yon can adjust position of the screen automatically
Reset
Menu
→ Adjust → Reset → Select
Yon can reset the screen.
→ Control with
→ Menu
Power saving Mode
If your computer system features a display power management function, the Monitor
enters into the power saving modes as follows.
When it is used with a computer system equipped with DPMS(VESA) this Monitor
provides an EnergyStar compliant function. If your computer does not feature display
power management, please sourc e an optional DPMS software program.
Power saving modes greatly reduce power consumption w h e n the computer is
temporarily not in use. Simply press any key or mouse button to return the Monitor
display to normal operation.
Normal
Power Saving function EPA
Operation
Stand-by
suspend
Power Off
H-Sync
Active
Inactive
Active
Inactive
V-Sync
Active
Active
Inactive
Inactive
Video
Active
Blanked
Blanked
Blanked
LED Color
Green
Orange/Green
Orange/Green
Orange
Blinking(1sec)
Blinking(0.5sec)
Power
35 Watts
8 Watts
8 Watts
5 Watts
Consumption
Less Than
Less Than
Less Than
Less Than
STANDARD SIGNAL TIMING CHART
If the signals conveyed from the computer match the following standard signals, the
screen automatically controls the signals.
Conversely, if the signals do not match, the screen will not appear or only the power
light would activate. Therefore it is important that you first set as the following, with
reference to the Video Card Guide.
Frequency
Resolution
Horizontal(Khz)
Vertical(Hz)
Polarity
Clock
Frequency(MHz)
640x350
31.5
70.0
25..175
640x400
31.3
70.0
25..056
600x400
37.9
85.1
31..500
720x400
31.5
70.1
28..322
720x400
37.9
85.0
35..500
640x480
31.5
59.9
25..175
640x480
37.5
75.0
31..500
640x480
37.9
72.8
31..500
800x600
35.2
56.3
36..000
10
800x600
37.9
60.3
40..000
11
800x600
46.9
75.0
49..500
12
800x600
48.1
72.2
50..000
13
800x600
53.7
85.1
56..250
14
832x624
49.7
74.5
57..283
15
1024x768
48.4
60.0
65..000
16
1024x768
56.5
70.1
75..000
17
1024x768
60.0
75.0
78..750
18
1152x864
54.5
60.0
90..000
19
1152x864
63.8
70.0
96..600
20
1152x864
65.8
72.0
96..600
21
1152x864
68.5
75.0
98..000
22
1280x1024
64.9
60.0
108..000
PRECATIONS
The below precautions should be carefully followed for the effective function of the
product and safety of users.
Do not use damaged plugs
Do not expose the product
or worn out outlets.
to severe impacts.
(Danger of electrocution)
(This could occur damage)
Do not try to disassemble,
In weather conditions of thunder
repair, renovate the product
and/or lightening, or when you will
without expert assistance.
not be using the product for a long
(Contact the service for parts
period of time, leave the plug out of
needing repair)
the outlet.
(Danger of electrocution)
Do not try to bend the cord or
Do not leave the product in damp or
put it under heavy objects.
wet places as there is danger when
(Danger of electrocution, fire)
the product is exposed to water or
metal. (Danger of electrocution)
Other Precautions
In cleaning the product take out the plug from the outlet, wipe with a soft and clean
cloth then with water. Never use benzene, alcohol or other cleaners. (Cont act the
service center or a store near you for static controllers and cleaners. The LCD
polarizing plate may peel off or the product may decolorize, dissolve, or crack.
TROUBLE SHOOTING
When failure or problems occur, refer to the following. For further assistance, contact
our customer support centers.
The power dose not
Check whether the plug is in place and try to reconnect it.
Trun on
(refer to pg5,pg6)
"Check signal cable"
Check if the signal cable is properly connected to the
sign appears
computer or video card and try to reconnect it (refer to pg4)
“Out of range”
Set
appears on the screen.
monitor.(refer to pg18)
The screen looks like
Check the connection of the monitor and the signal cable of
it is melting
the computer.
The screen trembles
Check if the resolution and frequency of the computer or the
A shadow appears on
video card is set to accommodate the monitor and then reset
the screen
the screen according to the present mode of the monitor menu
the
resolution
and
frequency
compatible
to
the
and the standard signal timing chart.
The
screen
is
too
bright
The
Try to control the brightness or contrast of the screen.(refer
to pg 14)
color
of
the
screen appears as if
Go to the OSD color control menu, the user mode and control
the door.(refer to pg10)
there is a shadow.
White does not to look
like white
The s c r e e n i s n o t in
Recontrol image setting
place
There is no sound
Check the connecting cable. (refer to pg4, pg8)
The volume is too low
Control with the up and down buttons (refer to pg8)
The sound is dull
Control with the up and down buttons (refer to pg8)
The
power
light
is
Check if the computer is on safe mode. Press on the PC
orange or flickers
keyboard or move the mouse. The screen will appear.
The screen is blurry
Control the screen’s frequency and clarity. (refer to pg 7)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 12
Creator                         : User Manual - Microsoft Word
Create Date                     : 2003:02:18 18:48:32
Title                           : User Manual.doc
Author                          : 김경용
Producer                        : Acrobat PDFWriter 5.0 Windows NT¿ë

EXIF Metadata provided by EXIF.tools