Digital Monitoring PC0156 Personal Emergency Response Base Unit User Manual

Digital Monitoring Products Inc Personal Emergency Response Base Unit

Contents

User Manual

LT-1329 © 2014 LifeStation14475LifeStation® Call us toll free at 877.833.2020 LifeStationCall us toll free at 877.833.2020 LifeStationCANCELTROUBLECOMMSTATUSTESTPOWERBracelet ClipBracelet ClipLanyard ClipLanyard ClipTELEPHONEWall JackELECTRICALWall Jack16.5 V ACHOUSE PHONEVOLUMEPHONE LINEEM20DConsoleHome Phone16.5VacPowerAdapter“Now we will test the range of your emergency pendants in various rooms. Press the help button when you are ready to start the range test.”Step 5. Setting up your Help Button“Press each emergency pendant in each room. Press the help button to complete the test.”When a pendant or help button is detected:“Pendant detected.”“Thank you, we have now nished setting up your communicator. Congratulations! Please press your help button to send your rst call to the personal response associate.”Press the help buttonStep 6. Placing a Test CallPress and release the Test Button within 3 seconds to place a test call.“Test call is now being placed. Please stand by.”If you do not get a response, review Step 3.Step 4. Connecting your Home PhoneConnect your home phone cord to the gray connection on the back of the Console.Choose either the wrist strap or break-away lanyard option for the 1148 Emergency Pendant.Step 1. Selecting your Help Button OptionQuick Start GuideSELECTING YOUR HELP BUTTON OPTION CONNECTING THE POWER SUPPLY CONNECTING THE PHONE LINE CONNECTING YOUR HOME PHONE SETTING UP YOUR HELP BUTTON PLACING A TEST CALLWhat is Included• One EM20 Console• One 12V DC Battery - installed• Color-coded phone cord• 16.5VAC Power Adapter• 1148 Emergency Pendant Wrist strap Break-away LanyardCANCELTROUBLECOMMSTATUSTESTPOWERCANCELTROUBLECOMMSTATUSTESTPOWERCANCELTROUBLECOMMSTATUSTESTPOWERPRELIMINARYPRELIMINARY
Call us toll free at 877.833.2020 if you need any assistance in setting up your system. LifeStationStep 2. Connecting the Power SupplyCANCELTROUBLECOMMSTATUSTESTPOWER13.6 V ACVOLUMEPHONE LINE HOUSE PHONE13.6 V ACVOLUMEPHONE LINE HOUSE PHONE1. Unpack the power supply and fully unroll the cord.2. Connect the power supply to the red connection on the back of the Console.3. Connect the power supply to an electrical outlet and secure with the provided screw through tab on the power supply.CANCELTROUBLECOMMSTATUSTESTPOWER“Welcome! We will now help you setup your communicator step-by-step. If you miss a step, wait, and we will repeat the instructions.”Step 3. Connecting the Phone Line1. Unpack the color-coded phone cord and fully unroll.If no phone line is detected within one minute:“Good, your communicator is now plugged in. You may press the help button to continue.”“Your communicator has not been correctly plugged in to the phone line. See step 3 in the quick start guide.”The Voice Prompt Setup begins automatically when power is applied. The setup cannot be exited until completed. If power is somehow interrupted and the setup does not complete, it will start over when power is restored. During the Voice-Prompt Setup the last message will repeat once for each minute of inactivity.“Please nd the quick start guide located in the box. When you have the guide in front of you, press the help button.”2. Connect the color-coded phone cord to the green connection on the back of the Console.Next, we will plug the gray phone cord into a phone jack in the wall. You may need to unplug your phone temporarily, and reconnect it in the next step.”CANCELTROUBLECOMMSTATUSTESTPOWERCANCELTROUBLECOMMSTATUSTESTPOWERNext, we will plug your phone into the back of the communicator if necessary. Refer to step 4 in the quick start guide. Please press the help button to continue.”When a phone line is detected:When power is applied, the Voice Prompt Setup begins.3. Connect the opposite end to the phone wall jack.PRELIMINARYPRELIMINARY

Navigation menu